Revision 106:ced8cbb51063, committed 2014-02-26

Comitter:

mbed_official

Date:

Wed Feb 26 09:45:12 2014 +0000

Parent:

105:e200768883d5

Child:

107:972de2315d5f

Commit message:

Synchronized with git revision 4222735eff5868389433f0e9271976b39c8115cd

Full URL: https://github.com/mbedmicro/mbed/commit/4222735eff5868389433f0e9271976b39c8115cd/

[NUCLEO_xxx] Update STM32CubeF4 driver V1.0.0 + update license

Changed in this revision

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx.h	Wed Feb 26 09:45:12 2014 +0000
@@ -25,19 +25,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_adc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_adc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -55,19 +55,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_adc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_adc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_can.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_can.c	Wed Feb 26 09:45:12 2014 +0000
@@ -51,19 +51,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_can.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_can.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_cec.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_cec.c	Wed Feb 26 09:45:12 2014 +0000
@@ -72,19 +72,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_cec.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_cec.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_comp.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_comp.c	Wed Feb 26 09:45:12 2014 +0000
@@ -78,19 +78,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_comp.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_comp.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_conf.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_conf.h	Wed Feb 26 09:45:12 2014 +0000
@@ -8,19 +8,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -34,19 +34,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crs.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crs.c	Wed Feb 26 09:45:12 2014 +0000
@@ -26,19 +26,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crs.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_crs.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dac.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dac.c	Wed Feb 26 09:45:12 2014 +0000
@@ -87,19 +87,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dac.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dac.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dbgmcu.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dbgmcu.c	Wed Feb 26 09:45:12 2014 +0000
@@ -14,19 +14,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dbgmcu.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dbgmcu.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dma.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dma.c	Wed Feb 26 09:45:12 2014 +0000
@@ -50,19 +50,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dma.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_dma.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_exti.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_exti.c	Wed Feb 26 09:45:12 2014 +0000
@@ -49,19 +49,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_exti.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_exti.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_flash.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_flash.c	Wed Feb 26 09:45:12 2014 +0000
@@ -55,19 +55,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_flash.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_flash.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_gpio.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_gpio.c	Wed Feb 26 09:45:12 2014 +0000
@@ -55,19 +55,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_gpio.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_gpio.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_i2c.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_i2c.c	Wed Feb 26 09:45:12 2014 +0000
@@ -58,19 +58,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_i2c.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_i2c.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_iwdg.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_iwdg.c	Wed Feb 26 09:45:12 2014 +0000
@@ -77,19 +77,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_iwdg.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_iwdg.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_misc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_misc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_misc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_misc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_pwr.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_pwr.c	Wed Feb 26 09:45:12 2014 +0000
@@ -15,19 +15,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_pwr.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_pwr.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_rcc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_rcc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -37,19 +37,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_rcc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_rcc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_rtc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_rtc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -213,19 +213,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_rtc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_rtc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_spi.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_spi.c	Wed Feb 26 09:45:12 2014 +0000
@@ -73,19 +73,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_spi.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_spi.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_syscfg.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_syscfg.c	Wed Feb 26 09:45:12 2014 +0000
@@ -27,19 +27,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_syscfg.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_syscfg.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_tim.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_tim.c	Wed Feb 26 09:45:12 2014 +0000
@@ -96,19 +96,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_tim.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_tim.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_usart.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_usart.c	Wed Feb 26 09:45:12 2014 +0000
@@ -60,19 +60,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_usart.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_usart.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_wwdg.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_wwdg.c	Wed Feb 26 09:45:12 2014 +0000
@@ -65,19 +65,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_wwdg.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/stm32f0xx_wwdg.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/system_stm32f0xx.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/system_stm32f0xx.c	Wed Feb 26 09:45:12 2014 +0000
@@ -65,19 +65,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/system_stm32f0xx.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F030R8/system_stm32f0xx.h	Wed Feb 26 09:45:12 2014 +0000
@@ -8,19 +8,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/startup_stm32f401xe.s	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/startup_stm32f401xe.s	Wed Feb 26 09:45:12 2014 +0000
@@ -1,31 +1,43 @@
-; STM32F40xx/41xx devices vector table for MDK-ARM MICRO toolchain
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2014, STMicroelectronics
-; All rights reserved.
-;
-; Redistribution and use in source and binary forms, with or without
-; modification, are permitted provided that the following conditions are met:
-;
-; 1. Redistributions of source code must retain the above copyright notice,
-;     this list of conditions and the following disclaimer.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
-;    this list of conditions and the following disclaimer in the documentation
-;    and/or other materials provided with the distribution.
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
-;    may be used to endorse or promote products derived from this software
-;    without specific prior written permission.
-;
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
+;* File Name          : startup_stm32f401xe.s
+;* Author             : MCD Application Team
+;* Version            : V2.0.0
+;* Date               : 18-February-2014
+;* Description        : STM32F401xe devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM4 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
 
 ; Amount of memory (in bytes) allocated for Stack
 ; Tailor this value to your application needs

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.s	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.s	Wed Feb 26 09:45:12 2014 +0000
@@ -1,31 +1,43 @@
-; STM32F40xx/41xx devices vector table for MDK-ARM toolchain
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Copyright (c) 2014, STMicroelectronics
-; All rights reserved.
-;
-; Redistribution and use in source and binary forms, with or without
-; modification, are permitted provided that the following conditions are met:
-;
-; 1. Redistributions of source code must retain the above copyright notice,
-;     this list of conditions and the following disclaimer.
-; 2. Redistributions in binary form must reproduce the above copyright notice,
-;    this list of conditions and the following disclaimer in the documentation
-;    and/or other materials provided with the distribution.
-; 3. Neither the name of STMicroelectronics nor the names of its contributors
-;    may be used to endorse or promote products derived from this software
-;    without specific prior written permission.
-;
-; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
+;* File Name          : startup_stm32f401xe.s
+;* Author             : MCD Application Team
+;* Version            : V2.0.0
+;* Date               : 18-February-2014
+;* Description        : STM32F401xe devices vector table for MDK-ARM toolchain. 
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM4 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>   
+;*******************************************************************************
+; 
+;* Redistribution and use in source and binary forms, with or without modification,
+;* are permitted provided that the following conditions are met:
+;*   1. Redistributions of source code must retain the above copyright notice,
+;*      this list of conditions and the following disclaimer.
+;*   2. Redistributions in binary form must reproduce the above copyright notice,
+;*      this list of conditions and the following disclaimer in the documentation
+;*      and/or other materials provided with the distribution.
+;*   3. Neither the name of STMicroelectronics nor the names of its contributors
+;*      may be used to endorse or promote products derived from this software
+;*      without specific prior written permission.
+;*
+;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+; 
+;*******************************************************************************
 
 __initial_sp    EQU     0x20018000 ; Top of RAM
   

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/startup_stm32f401xe.s	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/startup_stm32f401xe.s	Wed Feb 26 09:45:12 2014 +0000
@@ -1,8 +1,8 @@
 ;/******************** (C) COPYRIGHT 2014 STMicroelectronics ********************
 ;* File Name          : startup_stm32f401xe.s
 ;* Author             : MCD Application Team
-;* Version            : V2.0.0RC6
-;* Date               : 03-February-2014
+;* Version            : V2.0.0
+;* Date               : 18-February-2014
 ;* Description        : STM32F401xExx devices vector table for EWARM toolchain.
 ;*                      This module performs:
 ;*                      - Set the initial SP

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f401xe.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f401xe.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f401xe.h
   * @author  MCD Application Team
-  * @version V2.0.0RC6
-  * @date    03-February-2014
+  * @version V2.0.0
+  * @date    18-February-2014
   * @brief   CMSIS STM32F401xExx Device Peripheral Access Layer Header File. 
   *
   *          This file contains:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx.h
   * @author  MCD Application Team
-  * @version V2.0.0RC6
-  * @date    03-February-2014
+  * @version V2.0.0
+  * @date    18-February-2014
   * @brief   CMSIS STM32F4xx Device Peripheral Access Layer Header File.           
   *            
   *          The file is the unique include file that the application programmer
@@ -94,16 +94,16 @@
    In this case, these drivers will not be included and the application code will 
    be based on direct access to peripherals registers 
    */
-  /*#define USE_HAL_DRIVER */
+#define USE_HAL_DRIVER
 #endif /* USE_HAL_DRIVER */
 
 /**
-  * @brief CMSIS Device version number V2.0.0RC6
+  * @brief CMSIS Device version number V2.0.0
   */
 #define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN   (0x02) /*!< [31:24] main version */                                  
 #define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
 #define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
-#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC     (0x06) /*!< [7:0]  release candidate */ 
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
 #define __STM32F4xx_CMSIS_DEVICE_VERSION        ((__CMSIS_DEVICE_VERSION_MAIN     << 24)\
                                       |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
                                       |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   HAL module driver.
   *          This is the common part of the HAL initialization
   *         
@@ -62,17 +62,15 @@
   * @{
   */
 
-#ifdef HAL_MODULE_ENABLED
-
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 /**
- * @brief STM32F4xx HAL Driver version number V1.0.0RC1
+ * @brief STM32F4xx HAL Driver version number V1.0.0
    */
 #define __STM32F4xx_HAL_VERSION_MAIN   (0x01) /*!< [31:24] main version */
 #define __STM32F4xx_HAL_VERSION_SUB1   (0x00) /*!< [23:16] sub1 version */
 #define __STM32F4xx_HAL_VERSION_SUB2   (0x00) /*!< [15:8]  sub2 version */
-#define __STM32F4xx_HAL_VERSION_RC     (0x01) /*!< [7:0]  release candidate */ 
+#define __STM32F4xx_HAL_VERSION_RC     (0x00) /*!< [7:0]  release candidate */ 
 #define __STM32F4xx_HAL_VERSION         ((__STM32F4xx_HAL_VERSION_MAIN << 24)\
                                         |(__STM32F4xx_HAL_VERSION_SUB1 << 16)\
                                         |(__STM32F4xx_HAL_VERSION_SUB2 << 8 )\
@@ -96,6 +94,7 @@
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 static __IO uint32_t uwTick;
+
 /* Private function prototypes -----------------------------------------------*/
 /* Private functions ---------------------------------------------------------*/
 
@@ -121,18 +120,20 @@
   */
 
 /**
-  * @brief  This function configures the Flash prefetch, instruction and Data caches,
-  *         Configures systick, NVIC and Low level hardware
-  * 
-  * @note   This function is called at the beginning of program after reset and before 
-  *         the clock configuration
-  *             
-  * @note   The Systick configuration is based on HSI clock, as HSI is the clock
-  *         used after a system Reset and the NVIC configuration is set to Priority group 4 
+  * @brief  This function is used to initialize the HAL Library; it must be the first 
+  *         instruction to be executed in the main program (before to call any other
+  *         HAL function), it performs the following:
+  *           - Configure the Flash prefetch, instruction and Data caches
+  *           - Configures the SysTick to generate an interrupt each 1 millisecond,
+  *             which is clocked by the HSI (at this stage, the clock is not yet
+  *             configured and thus the system is running from the internal HSI at 16 MHz)
+  *           - Set NVIC Group Priority to 4
+  *           - Calls the HAL_MspInit() callback function defined in user file 
+  *             stm32f4xx_hal_msp.c to do the global low level hardware initialization 
   *            
-  * @note   The Systick Interrupt is defined with the lowest priority in "core_cm4.h" file
-  *         In this case HAL_Delay() must not be used under interrupt with higher priority.
-  *         
+  * @note   SysTick is used as time base for the HAL_Delay() function, the application
+  *         need to ensure that the SysTick time base is always set to 1 millisecond
+  *         to have correct HAL operation.
   * @note                  
   * @param  None
   * @retval HAL status
@@ -247,8 +248,8 @@
   */
 
 /**
-  * @brief  This function is used when systick configuration should be changed. 
-  *         It is used to provide the HAL a timer base service.
+  * @brief  This function is called from SysTick ISR each 1 millisecond, to increment
+  *         a global variable "uwTick" used as time base.
   * @param  None
   * @retval None
   */
@@ -258,7 +259,7 @@
 }
 
 /**
-  * @brief  This method used to provide a tick value in millisecond.
+  * @brief  Povides a tick value in millisecond.
   * @param  Non
   * @retval tick value
   */
@@ -268,7 +269,13 @@
 }
 
 /**
-  * @brief  This method used to provide blocking delay
+  * @brief  Provides a blocking delay in millisecond.
+  * @note   Care must be taken when using HAL_Delay(), this function provides accurate delay
+  *         (in milliseconds) based on variable incremented in SysTick ISR. This implies that
+  *         if HAL_Delay() is called from a peripheral ISR process, then the SysTick interrupt
+  *         must have higher priority (numerically lower) than the peripheral interrupt. 
+  *         Otherwise the caller ISR process will be blocked. To change the SysTick interrupt
+  *         priority you have to use HAL_NVIC_SetPriority() function.
   * @param  Delay : specifies the delay time length, in milliseconds.
   * @retval None
   */
@@ -283,7 +290,7 @@
 }
 
 /**
-  * @brief  This method returns the HAL revision
+  * @brief  Returns the HAL revision
   * @param  None
   * @retval version : 0xXYZR (8bits for each decimal, R for RC)
   */
@@ -435,7 +442,6 @@
   * @}
   */
 
-#endif /* HAL_MODULE_ENABLED */
 /**
   * @}
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   This file contains all the functions prototypes for the HAL 
   *          module driver.
   ******************************************************************************
@@ -109,40 +109,40 @@
 
 /** @brief  Main Flash memory mapped at 0x00000000
   */
-#define __HAL_REMAPMEMORY_FLASH             (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
+#define __HAL_REMAPMEMORY_FLASH()             (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
 
 /** @brief  System Flash memory mapped at 0x00000000
   */
-#define __HAL_REMAPMEMORY_SYSTEMFLASH       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
-                                                SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
-                                               }while(0);
+#define __HAL_REMAPMEMORY_SYSTEMFLASH()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                  SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
+                                                 }while(0);
 
 /** @brief  Embedded SRAM mapped at 0x00000000
   */
-#define __HAL_REMAPMEMORY_SRAM       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
-                                         SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
-                                         }while(0);
+#define __HAL_REMAPMEMORY_SRAM()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                           SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
+                                          }while(0);
 
 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
 /** @brief  FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
   */
-#define __HAL_REMAPMEMORY_FSMC       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
-                                         SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
-                                        }while(0);
+#define __HAL_REMAPMEMORY_FSMC()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                           SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+                                          }while(0);
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
 
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) 
 /** @brief  FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
   */
-#define __HAL_REMAPMEMORY_FMC       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
-                                        SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
-                                        }while(0);
+#define __HAL_REMAPMEMORY_FMC()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                          SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+                                         }while(0);
 
 /** @brief  FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
   */
-#define __HAL_REMAPMEMORY_FMC_SDRAM       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
-                                              SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
-                                             }while(0);
+#define __HAL_REMAPMEMORY_FMC_SDRAM()       do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+                                                SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
+                                               }while(0);
 #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
 
 /* Exported functions --------------------------------------------------------*/
@@ -150,8 +150,8 @@
 /* Initialization and de-initialization functions  ******************************/
 HAL_StatusTypeDef HAL_Init(void);
 HAL_StatusTypeDef HAL_DeInit(void);
-__weak void HAL_MspInit(void);
-__weak void HAL_MspDeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
 
 /* Peripheral Control functions  ************************************************/
 void     HAL_IncTick(void);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_adc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_adc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_adc.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   This file provides firmware functions to manage the following 
   *          functionalities of the Analog to Digital Convertor (ADC) peripheral:
   *           + Initialization and de-initialization functions
@@ -242,7 +242,10 @@
   
   /* Initialize the ADC state */
   hadc->State = HAL_ADC_STATE_READY;
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hadc);
+
   /* Return function status */
   return HAL_OK;
 }

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_adc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_adc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_adc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of ADC HAL extension module.
   ******************************************************************************
   * @attention
@@ -687,8 +687,8 @@
 /* Initialization/de-initialization functions ***********************************/
 HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
 HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
-__weak void       HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
-__weak void       HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
 
 /* I/O operation functions ******************************************************/
 HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
@@ -707,10 +707,10 @@
 
 uint32_t          HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
 
-__weak void       HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
-__weak void       HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
-__weak void       HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
-__weak void       HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+void       HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void       HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
 
 /* Peripheral Control functions *************************************************/
 HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_adc_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_adc_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_adc_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   This file provides firmware functions to manage the following 
   *          functionalities of the ADC extension peripheral:
   *           + Extended features functions

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_adc_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_adc_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_adc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of ADC HAL module.
   ******************************************************************************
   * @attention
@@ -264,7 +264,7 @@
 HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
 HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
 uint32_t          HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
-__weak void       HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+void       HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
 
 /* Peripheral Control functions *************************************************/
 HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_can.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_can.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_can.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   This file provides firmware functions to manage the following 
   *          functionalities of the Controller Area Network (CAN) peripheral:
   *           + Initialization and de-initialization functions 
@@ -459,7 +459,10 @@
   
   /* Change CAN state */
   hcan->State = HAL_CAN_STATE_RESET;
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hcan);
+
   /* Return function status */
   return HAL_OK;
 }
@@ -1166,7 +1169,7 @@
   }
   
   /* Call the Error call Back in case of Errors */
-  if(hcan->ErrorCode != HAL_IRDA_ERROR_NONE)
+  if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
   {
     /* Set the CAN state ready to be able to start again the process */
     hcan->State = HAL_CAN_STATE_READY;

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_can.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_can.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_can.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of CAN HAL module.
   ******************************************************************************
   * @attention
@@ -735,8 +735,8 @@
 HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
 HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
 HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
-__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
-__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
 
 /* I/O operation functions ******************************************************/
 HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
@@ -751,9 +751,9 @@
 uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
 HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
 
-__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
-__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
-__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
 
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_conf.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_conf_template.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   HAL configuration template file. 
   *          This file should be copied to the application folder and renamed
   *          to stm32f4xx_hal_conf.h.

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cortex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cortex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_cortex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   CORTEX HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the CORTEX:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cortex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cortex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_cortex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of CORTEX HAL module.
   ******************************************************************************
   * @attention
@@ -143,7 +143,7 @@
 uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
 void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
 void HAL_SYSTICK_IRQHandler(void);
-__weak void HAL_SYSTICK_Callback(void);
+void HAL_SYSTICK_Callback(void);
 
 /**
   * @}

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_crc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_crc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_crc.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   CRC HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Cyclic Redundancy Check (CRC) peripheral:
@@ -160,6 +160,9 @@
   /* Change CRC peripheral state */
   hcrc->State = HAL_CRC_STATE_RESET;
 
+  /* Release Lock */
+  __HAL_UNLOCK(hcrc);
+
   /* Return function status */
   return HAL_OK;
 }

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_crc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_crc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_crc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of CRC HAL module.
   ******************************************************************************
   * @attention
@@ -97,8 +97,8 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
 HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
-__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
-__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
 
 /* Peripheral Control functions  ************************************************/
 uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cryp.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cryp.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_cryp.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   CRYP HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Cryptography (CRYP) peripheral:
@@ -233,7 +233,10 @@
   
   /* Change the CRYP state */
   hcryp->State = HAL_CRYP_STATE_RESET;
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hcryp);
+
   /* Return function status */
   return HAL_OK;
 }
@@ -1038,7 +1041,7 @@
         /* Change state */
         hcryp->State = HAL_CRYP_STATE_TIMEOUT;
         
-        /* Process Unlocked */          
+        /* Process Unlocked */
         __HAL_UNLOCK(hcryp);
         
         return HAL_TIMEOUT;

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cryp.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cryp.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_cryp.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of CRYP HAL module.
   ******************************************************************************
   * @attention
@@ -375,13 +375,13 @@
 HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
 
 /* MSP functions  *************************************************************/
-__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
-__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
 
 /* CallBack functions  ********************************************************/
-__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
-__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
-__weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
 
 #endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cryp_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cryp_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_cryp_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Extended CRYP HAL module driver
   *          This file provides firmware functions to manage the following 
   *          functionalities of CRYP extension peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cryp_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_cryp_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_cryp_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of CRYP HAL Extension module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dac.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   DAC HAL module driver.
   *         This file provides firmware functions to manage the following 
   *         functionalities of the Digital to Analog Converter (DAC) peripheral:
@@ -263,22 +263,25 @@
   {
      return HAL_ERROR;
   }
-  
+
   /* Check the parameters */
   assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
-  
+
   /* Change DAC state */
   hdac->State = HAL_DAC_STATE_BUSY;
-  
+
   /* DeInit the low level hardware */
   HAL_DAC_MspDeInit(hdac);
-  
+
   /* Set DAC error code to none */
   hdac->ErrorCode = HAL_DAC_ERROR_NONE;
-  
+
   /* Change DAC state */
   hdac->State = HAL_DAC_STATE_RESET;
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hdac);
+
   /* Return function status */
   return HAL_OK;
 }

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dac.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of DAC HAL module.
   ******************************************************************************
   * @attention
@@ -253,8 +253,8 @@
 /* Initialization/de-initialization functions ***********************************/ 
 HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
 HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
-__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
-__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
 
 /* I/O operation functions ******************************************************/
 HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
@@ -272,10 +272,10 @@
 void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
 uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
 
-__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
-__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
-__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
-__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
 
 #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dac_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   DAC HAL module driver.
   *         This file provides firmware functions to manage the following 
   *         functionalities of DAC extension peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dac_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dac.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of DAC HAL Extension module.
   ******************************************************************************
   * @attention
@@ -155,10 +155,10 @@
 HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
 HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
 
-__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
-__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
-__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
-__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
 
 void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
 void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dcmi.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   DCMI HAL module driver
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Digital Camera Interface (DCMI) peripheral:
@@ -54,7 +54,7 @@
       (+) __HAL_DCMI_CLEAR_FLAG: Clear the DCMI pending flags.
       (+) __HAL_DCMI_ENABLE_IT: Enable the specified DCMI interrupts.
       (+) __HAL_DCMI_DISABLE_IT: Disable the specified DCMI interrupts.
-      (+) __HAL_DCMI_IT_STATUS: Check whether the specified DCMI interrupt has occurred or not.
+      (+) __HAL_DCMI_GET_IT_SOURCE: Check whether the specified DCMI interrupt has occurred or not.
  
      [..] 
        (@) You can refer to the DCMI HAL driver header file for more useful macros
@@ -110,8 +110,8 @@
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
-static void       HAL_DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma);
-static void       HAL_DCMI_DMAError(DMA_HandleTypeDef *hdma);
+static void       DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma);
+static void       DCMI_DMAError(DMA_HandleTypeDef *hdma);
 
 /* Private functions ---------------------------------------------------------*/
 
@@ -231,6 +231,9 @@
   /* Initialize the DCMI state*/
   hdcmi->State = HAL_DCMI_STATE_RESET;
 
+  /* Release Lock */
+  __HAL_UNLOCK(hdcmi);
+
   return HAL_OK;
 }
 
@@ -311,10 +314,10 @@
   hdcmi->Instance->CR |=  (uint32_t)(DCMI_Mode);
 
   /* Set the DMA memory0 conversion complete callback */
-  hdcmi->DMA_Handle->XferCpltCallback = HAL_DCMI_DMAConvCplt;
+  hdcmi->DMA_Handle->XferCpltCallback = DCMI_DMAConvCplt;
 
   /* Set the DMA error callback */
-  hdcmi->DMA_Handle->XferErrorCallback = HAL_DCMI_DMAError;
+  hdcmi->DMA_Handle->XferErrorCallback = DCMI_DMAError;
 
   if(Length <= 0xFFFF)
   {
@@ -324,7 +327,7 @@
   else /* DCMI_DOUBLE_BUFFER Mode */
   {
     /* Set the DMA memory1 conversion complete callback */
-    hdcmi->DMA_Handle->XferM1CpltCallback = HAL_DCMI_DMAConvCplt; 
+    hdcmi->DMA_Handle->XferM1CpltCallback = DCMI_DMAConvCplt; 
 
     /* Initialise transfer parameters */
     hdcmi->XferCount = 1;
@@ -421,7 +424,7 @@
   /* Synchronization error interrupt management *******************************/
   if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_ERRRI) != RESET)
   {
-    if(__HAL_DCMI_IT_STATUS(hdcmi, DCMI_IT_ERR) != RESET)
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_ERR) != RESET)
     {
       /* Disable the Synchronization error interrupt */
       __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_ERR); 
@@ -448,7 +451,7 @@
   /* Overflow interrupt management ********************************************/
   if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_OVFRI) != RESET) 
   {
-    if(__HAL_DCMI_IT_STATUS(hdcmi, DCMI_IT_OVF) != RESET)
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_OVF) != RESET)
     {
       /* Disable the Overflow interrupt */
       __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_OVF);
@@ -475,7 +478,7 @@
   /* Line Interrupt management ************************************************/
   if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_LINERI) != RESET)
   {
-    if(__HAL_DCMI_IT_STATUS(hdcmi, DCMI_IT_LINE) != RESET)
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_LINE) != RESET)
     {
       /* Clear the Line interrupt flag */  
       __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_LINERI);
@@ -490,7 +493,7 @@
   /* VSYNC interrupt management ***********************************************/
   if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_VSYNCRI) != RESET)
   {
-    if(__HAL_DCMI_IT_STATUS(hdcmi, DCMI_IT_VSYNC) != RESET)
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_VSYNC) != RESET)
     {
       /* Disable the VSYNC interrupt */
       __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_VSYNC);   
@@ -508,7 +511,7 @@
   /* End of Frame interrupt management ****************************************/
   if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_FRAMERI) != RESET)
   {
-    if(__HAL_DCMI_IT_STATUS(hdcmi, DCMI_IT_FRAME) != RESET)
+    if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_FRAME) != RESET)
     {
       /* Disable the End of Frame interrupt */
       __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_FRAME);
@@ -736,7 +739,7 @@
   * @param  hdma: pointer to DMA handle.
   * @retval None
   */
-static void HAL_DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma)
+static void DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma)
 {
   uint32_t tmp = 0;
  
@@ -789,7 +792,7 @@
   * @param  hdma: pointer to DMA handle.
   * @retval None
   */
-static void HAL_DCMI_DMAError(DMA_HandleTypeDef *hdma)
+static void DCMI_DMAError(DMA_HandleTypeDef *hdma)
 {
     DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;     
     hdcmi->State= HAL_DCMI_STATE_READY;

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dcmi.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dcmi.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of DCMI HAL module.
   ******************************************************************************
   * @attention
@@ -453,23 +453,23 @@
   *            @arg DCMI_IT_LINE: Line interrupt mask
   * @retval The state of INTERRUPT.
   */
-#define __HAL_DCMI_IT_STATUS(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
     
 /* Exported functions --------------------------------------------------------*/  
 
 /* Initialization and de-initialization functions *******************************/
 HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
 HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
-__weak void       HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
-__weak void       HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+void       HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+void       HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
 
 /* IO operation functions *******************************************************/
 HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
 HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
-__weak void       HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
-__weak void       HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
-__weak void       HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
-__weak void       HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+void       HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
 void              HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
 
 /* Peripheral Control functions *************************************************/

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_def.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_def.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_def.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   This file contains HAL common defines, enumeration, macros and 
   *          structures definitions. 
   ******************************************************************************
@@ -115,7 +115,30 @@
   #endif /* __packed */
 #endif /* __GNUC__ */
 
-  
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined   (__GNUC__)        /* GNU Compiler */
+  #ifndef __ALIGN_END
+    #define __ALIGN_END    __attribute__ ((aligned (4)))
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN  
+    #define __ALIGN_BEGIN
+  #endif /* __ALIGN_BEGIN */
+#else
+  #ifndef __ALIGN_END
+    #define __ALIGN_END
+  #endif /* __ALIGN_END */
+  #ifndef __ALIGN_BEGIN      
+    #if defined   (__CC_ARM)      /* ARM Compiler */
+      #define __ALIGN_BEGIN    __align(4)  
+    #elif defined (__ICCARM__)    /* IAR Compiler */
+      #define __ALIGN_BEGIN 
+    #elif defined  (__TASKING__)  /* TASKING Compiler */
+      #define __ALIGN_BEGIN    __align(4) 
+    #endif /* __CC_ARM */
+  #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
 #ifdef __cplusplus
 }
 #endif

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dma.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   DMA HAL module driver.
   *    
   *          This file provides firmware functions to manage the following 
@@ -77,7 +77,7 @@
       (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Stream pending flags.
       (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Stream interrupts.
       (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Stream interrupts.
-      (+) __HAL_DMA_IT_STATUS: Check whether the specified DMA Stream interrupt has occurred or not. 
+      (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not. 
      
      [..] 
       (@) You can refer to the DMA HAL driver header file for more useful macros  
@@ -301,6 +301,9 @@
   /* Initialize the DMA state */
   hdma->State = HAL_DMA_STATE_RESET;
 
+  /* Release Lock */
+  __HAL_UNLOCK(hdma);
+
   return HAL_OK;
 }
 
@@ -606,7 +609,7 @@
   /* Transfer Error Interrupt management ***************************************/
   if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)
   {
-    if(__HAL_DMA_IT_STATUS(hdma, DMA_IT_TE) != RESET)
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
     {
       /* Disable the transfer error interrupt */
       __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE);
@@ -633,7 +636,7 @@
   /* FIFO Error Interrupt management ******************************************/
   if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma)) != RESET)
   {
-    if(__HAL_DMA_IT_STATUS(hdma, DMA_IT_FE) != RESET)
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
     {
       /* Disable the FIFO Error interrupt */
       __HAL_DMA_DISABLE_IT(hdma, DMA_IT_FE);
@@ -660,7 +663,7 @@
   /* Direct Mode Error Interrupt management ***********************************/
   if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma)) != RESET)
   {
-    if(__HAL_DMA_IT_STATUS(hdma, DMA_IT_DME) != RESET)
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
     {
       /* Disable the direct mode Error interrupt */
       __HAL_DMA_DISABLE_IT(hdma, DMA_IT_DME);
@@ -687,7 +690,7 @@
   /* Half Transfer Complete Interrupt management ******************************/
   if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)) != RESET)
   {
-    if(__HAL_DMA_IT_STATUS(hdma, DMA_IT_HT) != RESET)
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
     { 
       /* Multi_Buffering mode enabled */
       if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
@@ -733,7 +736,7 @@
   /* Transfer Complete Interrupt management ***********************************/
   if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)) != RESET)
   {
-    if(__HAL_DMA_IT_STATUS(hdma, DMA_IT_TC) != RESET)
+    if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
     {
       if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
       {

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dma.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of DMA HAL module.
   ******************************************************************************
   * @attention
@@ -626,7 +626,7 @@
   *            @arg DMA_IT_DME: Direct mode error interrupt.
   * @retval The state of DMA_IT.
   */
-#define __HAL_DMA_IT_STATUS(__HANDLE__, __INTERRUPT__)  (((__INTERRUPT__) != DMA_IT_FE)? \
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)  (((__INTERRUPT__) != DMA_IT_FE)? \
                                                         ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
                                                         ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma2d.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma2d.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dma2d.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   DMA2D HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the DMA2D peripheral:
@@ -79,7 +79,7 @@
       (+) __HAL_DMA2D_CLEAR_FLAG: Clears the DMA2D pending flags.
       (+) __HAL_DMA2D_ENABLE_IT: Enables the specified DMA2D interrupts.
       (+) __HAL_DMA2D_DISABLE_IT: Disables the specified DMA2D interrupts.
-      (+) __HAL_DMA2D_IT_STATUS: Checks whether the specified DMA2D interrupt has occurred or not.
+      (+) __HAL_DMA2D_GET_IT_SOURCE: Checks whether the specified DMA2D interrupt has occurred or not.
      
      [..] 
       (@) You can refer to the DMA2D HAL driver header file for more useful macros
@@ -128,7 +128,7 @@
 
 #ifdef HAL_DMA2D_MODULE_ENABLED
 
-#if defined(STM32F429xx) || defined(STM32F439xx)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
@@ -265,6 +265,9 @@
   /* Initialize the DMA2D state*/
   hdma2d->State  = HAL_DMA2D_STATE_RESET;
 
+  /* Release Lock */
+  __HAL_UNLOCK(hdma2d);
+
   return HAL_OK;
 }
 
@@ -720,7 +723,7 @@
   /* Transfer Error Interrupt management ***************************************/
   if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE) != RESET)
   {
-    if(__HAL_DMA2D_IT_STATUS(hdma2d, DMA2D_IT_TE) != RESET)
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TE) != RESET)
     {
       /* Disable the transfer Error interrupt */
       __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE);  
@@ -747,7 +750,7 @@
   /* Configuration Error Interrupt management **********************************/
   if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE) != RESET)
   {
-    if(__HAL_DMA2D_IT_STATUS(hdma2d, DMA2D_IT_CE) != RESET)
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_CE) != RESET)
     {
       /* Disable the Configuration Error interrupt */
       __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE);
@@ -774,7 +777,7 @@
   /* Transfer Complete Interrupt management ************************************/
   if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) != RESET)
   {
-    if(__HAL_DMA2D_IT_STATUS(hdma2d, DMA2D_IT_TC) != RESET)
+    if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TC) != RESET)
     { 
       /* Disable the transfer complete interrupt */
       __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC);
@@ -1223,7 +1226,7 @@
 /**
   * @}
   */
-#endif /* STM32F429xx || STM32F439xx */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
 #endif /* HAL_DMA2D_MODULE_ENABLED */
 /**
   * @}

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma2d.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma2d.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dma2d.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of DMA2D HAL module.
   ******************************************************************************
   * @attention
@@ -43,7 +43,7 @@
  extern "C" {
 #endif
 
-#if defined(STM32F429xx) || defined(STM32F439xx)
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f4xx_hal_def.h"
 
@@ -449,15 +449,15 @@
   *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
   * @retval The state of INTERRUPT.
   */
-#define __HAL_DMA2D_IT_STATUS(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
 
 /* Exported functions --------------------------------------------------------*/  
 
 /* Initialization and de-initialization functions *******************************/
 HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d); 
 HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
-__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
-__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
 
 /* IO operation functions *******************************************************/
 HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
@@ -481,7 +481,7 @@
 HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
 uint32_t               HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
 
-#endif /* STM32F429xx || STM32F439xx */
+#endif /* STM32F427xx || STM32F437xx  || STM32F429xx || STM32F439xx */
 
 /**
   * @}

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dma_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   DMA Extension HAL module driver
   *         This file provides firmware functions to manage the following 
   *         functionalities of the DMA Extension peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_dma_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of DMA HAL extension module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_eth.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_eth.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_eth.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   ETH HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Ethernet (ETH) peripheral:
@@ -402,7 +402,10 @@
   
   /* Set ETH HAL state to Disabled */
   heth->State= HAL_ETH_STATE_RESET;
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(heth);
+
   /* Return function status */
   return HAL_OK;
 }
@@ -882,7 +885,7 @@
     HAL_ETH_RxCpltCallback(heth);
     
      /* Clear the Eth DMA Rx IT pending bits */
-    __HAL_ETH_DMA_CLEAR_IT_PENDING_BIT(heth, ETH_DMA_IT_R);
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R);
 
     /* Set HAL State to Ready */
     heth->State = HAL_ETH_STATE_READY;
@@ -898,7 +901,7 @@
     HAL_ETH_TxCpltCallback(heth);
     
     /* Clear the Eth DMA Tx IT pending bits */
-    __HAL_ETH_DMA_CLEAR_IT_PENDING_BIT(heth, ETH_DMA_IT_T);
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T);
 
     /* Set HAL State to Ready */
     heth->State = HAL_ETH_STATE_READY;
@@ -908,7 +911,7 @@
   }
   
   /* Clear the interrupt flags */
-  __HAL_ETH_DMA_CLEAR_IT_PENDING_BIT(heth, ETH_DMA_IT_NIS);
+  __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS);
   
   /* ETH DMA Error */
   if(__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS))
@@ -917,7 +920,7 @@
     HAL_ETH_ErrorCallback(heth);
 
     /* Clear the interrupt flags */
-    __HAL_ETH_DMA_CLEAR_IT_PENDING_BIT(heth, ETH_DMA_FLAG_AIS);
+    __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS);
   
     /* Set HAL State to Ready */
     heth->State = HAL_ETH_STATE_READY;

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_eth.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_eth.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_eth.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of ETH HAL module.
   ******************************************************************************
   * @attention
@@ -1910,7 +1910,7 @@
   * @param  __INTERRUPT__: specifies the interrupt pending bit to clear. @defgroup ETH_DMA_Interrupts
   * @retval None
   */
-#define __HAL_ETH_DMA_CLEAR_IT_PENDING_BIT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__)      ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
 
 /**
   * @brief  Checks whether the specified ETHERNET DMA flag is set or not.
@@ -2134,8 +2134,8 @@
 /* Initialization and de-initialization functions  ****************************/
 HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
 HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
-__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
-__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
 HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
 HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
 
@@ -2148,9 +2148,9 @@
 void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
 
  /* Callback in non blocking modes (Interrupt) */
-__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
-__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
-__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
 
 /* Cmmunication with PHY functions*/
 HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_flash.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   FLASH HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the internal FLASH memory:
@@ -281,7 +281,7 @@
   FLASH->CR &= (~FLASH_MER_BIT);
 
   /* Check FLASH End of Operation flag  */
-  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP))
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
   {
     if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
     {
@@ -338,7 +338,7 @@
   
   /* Check FLASH operation error flags */
   if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
-                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)))
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
   {
     if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
     {
@@ -568,7 +568,7 @@
     
   uint32_t timeout = HAL_GetTick() + Timeout;
      
-  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY)) 
+  while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET) 
   { 
     if(Timeout != HAL_MAX_DELAY)
     {
@@ -580,7 +580,7 @@
   }
   
   if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
-                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)))
+                           FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
   {
     /*Save the error code*/
     FLASH_SetErrorCode();
@@ -700,32 +700,32 @@
   */
 static void FLASH_SetErrorCode(void)
 { 
-  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR))
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
   {
    pFlash.ErrorCode = FLASH_ERROR_WRP;
   }
   
-  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR))
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
   {
    pFlash.ErrorCode |= FLASH_ERROR_PGA;
   }
   
-  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR))
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
   {
     pFlash.ErrorCode |= FLASH_ERROR_PGP;
   }
   
-  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR))
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET)
   {
     pFlash.ErrorCode |= FLASH_ERROR_PGS;
   }
   
-  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR))
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
   {
     pFlash.ErrorCode |= FLASH_ERROR_RD;
   }
   
-  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR))
+  if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
   {
     pFlash.ErrorCode |= FLASH_ERROR_OPERATION;
   }

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_flash.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of FLASH HAL module.
   ******************************************************************************
   * @attention
@@ -302,7 +302,7 @@
   *            @arg FLASH_FLAG_BSY   : FLASH Busy flag
   * @retval The new state of __FLAG__ (SET or RESET).
   */
-#define __HAL_FLASH_GET_FLAG(__FLAG__)   ((FLASH->SR & (__FLAG__)) == (__FLAG__))
+#define __HAL_FLASH_GET_FLAG(__FLAG__)   ((FLASH->SR & (__FLAG__)))
 
 /**
   * @brief  Clear the specified FLASH flag.
@@ -329,8 +329,8 @@
 /* FLASH IRQ handler method */
 void                HAL_FLASH_IRQHandler(void);
 /* Callbacks in non blocking modes */ 
-__weak void         HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
-__weak void         HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+void         HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void         HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
 
 /* Peripheral Control functions  **********************************************/
 HAL_StatusTypeDef   HAL_FLASH_Unlock(void);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_flash_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Extended FLASH HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the FLASH extension peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_flash_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_flash_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of FLASH HAL Extension module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_gpio.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_gpio.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_gpio.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   GPIO HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the General Purpose Input/Output (GPIO) peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_gpio.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_gpio.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_gpio.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of GPIO HAL module.
   ******************************************************************************
   * @attention
@@ -258,7 +258,7 @@
 void          HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
 void          HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
 void          HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
-__weak void   HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+void   HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
 
 /**
   * @}

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_gpio_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_gpio_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_gpio_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of GPIO HAL Extension module.
   ******************************************************************************
   * @attention
@@ -642,7 +642,7 @@
   */ 
 #define GPIO_AF7_USART1        ((uint8_t)0x07)  /* USART1 Alternate Function mapping     */
 #define GPIO_AF7_USART2        ((uint8_t)0x07)  /* USART2 Alternate Function mapping     */
-#define GPIO_AF7_I2S3ext      ((uint8_t)0x07)  /* I2S3ext_SD Alternate Function mapping */
+#define GPIO_AF7_I2S3ext       ((uint8_t)0x07)  /* I2S3ext_SD Alternate Function mapping */
 
 /** 
   * @brief   AF 8 selection  
@@ -653,6 +653,9 @@
   * @brief   AF 9 selection 
   */ 
 #define GPIO_AF9_TIM14         ((uint8_t)0x09)  /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2          ((uint8_t)0x09)  /* I2C2 Alternate Function mapping  */
+#define GPIO_AF9_I2C3          ((uint8_t)0x09)  /* I2C3 Alternate Function mapping  */
+
 
 /** 
   * @brief   AF 10 selection  
@@ -680,6 +683,7 @@
                           ((AF) == GPIO_AF6_SPI3)       || ((AF) == GPIO_AF5_SPI4)       || \
                           ((AF) == GPIO_AF7_USART1)     || ((AF) == GPIO_AF7_USART2)     || \
                           ((AF) == GPIO_AF8_USART6)     || ((AF) == GPIO_AF10_OTG_FS)    || \
+                          ((AF) == GPIO_AF9_I2C2)       || ((AF) == GPIO_AF9_I2C3)       || \
                           ((AF) == GPIO_AF12_SDIO)      || ((AF) == GPIO_AF15_EVENTOUT))
 
 #endif /* STM32F401xC || STM32F401xE */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hash.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hash.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_hash.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   HASH HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the HASH peripheral:
@@ -219,7 +219,10 @@
   
   /* Change the HASH state */
   hhash->State = HAL_HASH_STATE_RESET;  
-   
+
+  /* Release Lock */
+  __HAL_UNLOCK(hhash);
+
   /* Return function status */
   return HAL_OK;
 }

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hash.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hash.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_hash.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of HASH HAL module.
   ******************************************************************************
   * @attention
@@ -304,11 +304,11 @@
 
 /* Peripheral State functions  ************************************************/
 HAL_HASH_STATETypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
-__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
-__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
-__weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
-__weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
-__weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
 
 #endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
 /**

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hash_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hash_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_hash_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   HASH HAL Extension module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of HASH peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hash_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hash_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_hash_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of HASH HAL Extension module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hcd.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hcd.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_hcd.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   HCD HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the USB Peripheral Controller:
@@ -88,10 +88,10 @@
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
-static void HAL_HCD_HC_IN_IRQHandler   (HCD_HandleTypeDef *hhcd, uint8_t chnum);
-static void HAL_HCD_HC_OUT_IRQHandler  (HCD_HandleTypeDef *hhcd, uint8_t chnum); 
-static void HAL_HCD_RXQLVL_IRQHandler  (HCD_HandleTypeDef *hhcd);
-static void HAL_HCD_Port_IRQHandler     (HCD_HandleTypeDef *hhcd);
+static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum); 
+static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd);
+static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd);
 /* Private functions ---------------------------------------------------------*/
 
 /** @defgroup HCD_Private_Functions
@@ -489,16 +489,17 @@
       /* Cleanup HPRT */
       USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
         USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
-         
+       
       /* Handle Host Port Interrupts */
       HAL_HCD_Disconnect_Callback(hhcd);
+       USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
       __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT);
     }
     
     /* Handle Host Port Interrupts */
     if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT))
     {
-      HAL_HCD_Port_IRQHandler (hhcd);
+      HCD_Port_IRQHandler (hhcd);
     }
     
     /* Handle Host SOF Interrupts */
@@ -519,11 +520,11 @@
         {
           if ((USBx_HC(i)->HCCHAR) &  USB_OTG_HCCHAR_EPDIR)
           {
-            HAL_HCD_HC_IN_IRQHandler (hhcd, i);
+            HCD_HC_IN_IRQHandler (hhcd, i);
           }
           else
           {
-            HAL_HCD_HC_OUT_IRQHandler (hhcd, i);
+            HCD_HC_OUT_IRQHandler (hhcd, i);
           }
         }
       }
@@ -535,7 +536,7 @@
     {
       USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
       
-      HAL_HCD_RXQLVL_IRQHandler (hhcd);
+      HCD_RXQLVL_IRQHandler (hhcd);
       
       USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
     }
@@ -644,7 +645,6 @@
 { 
   __HAL_LOCK(hhcd); 
   USB_StopHost(hhcd->Instance);
-  USB_DriveVbus(hhcd->Instance, 0);
   __HAL_UNLOCK(hhcd); 
   return HAL_OK;
 }
@@ -773,7 +773,7 @@
   *         This parameter can be a value from 1 to 15
   * @retval none
   */
-static void HAL_HCD_HC_IN_IRQHandler   (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+static void HCD_HC_IN_IRQHandler   (HCD_HandleTypeDef *hhcd, uint8_t chnum)
 {
   USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
     
@@ -912,7 +912,7 @@
   *         This parameter can be a value from 1 to 15
   * @retval none
   */
-static void HAL_HCD_HC_OUT_IRQHandler  (HCD_HandleTypeDef *hhcd, uint8_t chnum)
+static void HCD_HC_OUT_IRQHandler  (HCD_HandleTypeDef *hhcd, uint8_t chnum)
 {
   USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
   
@@ -1052,7 +1052,7 @@
   * @param  hhcd: HCD handle
   * @retval none
   */
-static void HAL_HCD_RXQLVL_IRQHandler  (HCD_HandleTypeDef *hhcd)
+static void HCD_RXQLVL_IRQHandler  (HCD_HandleTypeDef *hhcd)
 {
   USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;  
   uint8_t                       channelnum =0;  
@@ -1102,7 +1102,7 @@
   * @param  hhcd: HCD handle
   * @retval none
   */
-static void HAL_HCD_Port_IRQHandler  (HCD_HandleTypeDef *hhcd)
+static void HCD_Port_IRQHandler  (HCD_HandleTypeDef *hhcd)
 {
   USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;  
   __IO uint32_t hprt0, hprt0_dup;
@@ -1116,9 +1116,10 @@
   
   /* Check wether Port Connect Detected */
   if((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET)
-  {
+  {  
     if((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS)
     {
+      USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
       HAL_HCD_Connect_Callback(hhcd);
     }
     hprt0_dup  |= USB_OTG_HPRT_PCDET;
@@ -1138,17 +1139,33 @@
         {
           USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_6_MHZ );
         }
-        else if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_FULL_SPEED << 17))
+        else
         {
           USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
         }
       }
       else
       {
-        USB_InitFSLSPClkSel(USBx , HCFG_30_60_MHZ); 
+        if(hhcd->Init.speed == HCD_SPEED_FULL)
+        {
+          USBx_HOST->HFIR = (uint32_t)60000;
+        }
       }
       HAL_HCD_Connect_Callback(hhcd);
+      
+      if(hhcd->Init.speed == HCD_SPEED_HIGH)
+      {
+        USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT); 
+      }
     }
+    else
+    {
+      /* Cleanup HPRT */
+      USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
+        USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
+      
+      USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT); 
+    }    
   }
   
   /* Check For an overcurrent */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hcd.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_hcd.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_hcd.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of HCD HAL module.
   ******************************************************************************
   * @attention
@@ -116,8 +116,9 @@
   * @{
   */
 #define HCD_SPEED_HIGH               0
-#define HCD_SPEED_FULL               1
 #define HCD_SPEED_LOW                2  
+#define HCD_SPEED_FULL               3
+
 /**
   * @}
   */
@@ -174,8 +175,8 @@
 HAL_StatusTypeDef       HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd,  
                                   uint8_t ch_num);
 
-__weak void            HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
-__weak void            HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+void            HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void            HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
 
 /* I/O operation functions  *****************************************************/
 HAL_StatusTypeDef       HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
@@ -189,10 +190,10 @@
 
  /* Non-Blocking mode: Interrupt */
 void                    HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
-__weak void             HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
-__weak void             HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
-__weak void             HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
-__weak void             HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, 
+void             HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void             HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void             HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void             HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, 
                                                             uint8_t chnum, 
                                                             HCD_URBStateTypeDef urb_state);
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2c.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2c.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2c.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   I2C HAL module driver.
   *          This file provides firmware functions to manage the following
   *          functionalities of the Inter Integrated Circuit (I2C) peripheral:
@@ -372,8 +372,12 @@
   HAL_I2C_MspDeInit(hi2c);
 
   hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
+
   hi2c->State = HAL_I2C_STATE_RESET;
 
+  /* Release Lock */
+  __HAL_UNLOCK(hi2c);
+
   return HAL_OK;
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2c.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2c.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2c.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of I2C HAL module.
   ******************************************************************************
   * @attention
@@ -392,8 +392,8 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
 HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
 
 /* I/O operation functions  *****************************************************/
 /******* Blocking mode: Polling */
@@ -424,13 +424,13 @@
 /******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
 void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
 void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
-__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
 
 /* Peripheral Control and State functions  **************************************/
 HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2c_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2c_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2c_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   I2C Extension HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of I2C extension peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2c_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2c_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2c_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of I2C HAL Extension module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2s.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2s.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2s.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   I2S HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Integrated Interchip Sound (I2S) peripheral:
@@ -392,7 +392,10 @@
   HAL_I2S_MspDeInit(hi2s);
   
   hi2s->State = HAL_I2S_STATE_RESET;
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hi2s);
+
   return HAL_OK;
 }
 
@@ -530,7 +533,7 @@
     if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK)
     {
       return HAL_TIMEOUT;
-    }    
+    }
 
     hi2s->State = HAL_I2S_STATE_READY; 
     
@@ -1053,10 +1056,17 @@
     I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
   }
   
-  /* Disable the I2S DMA Stream */
-  __HAL_DMA_DISABLE(hi2s->hdmatx);
-  __HAL_DMA_DISABLE(hi2s->hdmarx);
-  
+  /* Abort the I2S DMA Stream tx */
+  if(hi2s->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hi2s->hdmatx);
+  }
+  /* Abort the I2S DMA Stream rx */
+  if(hi2s->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(hi2s->hdmarx);
+  }
+
   /* Disable I2S peripheral */
   __HAL_I2S_DISABLE(hi2s);
   

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2s.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2s.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2s.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of I2S HAL module.
   ******************************************************************************
   * @attention
@@ -399,11 +399,11 @@
 HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
 
 /* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
-__weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
-__weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
-__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
-__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
-__weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
 
 void              I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
 void              I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2s_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2s_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2s_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   I2S HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of I2S extension peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2s_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_i2s_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_i2s_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of I2S HAL module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_irda.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_irda.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_irda.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   IRDA HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the IrDA SIR ENDEC block (IrDA):
@@ -140,6 +140,7 @@
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
+#define IRDA_TIMEOUT_VALUE  22000
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
@@ -279,9 +280,13 @@
   /* DeInit the low level hardware */
   HAL_IRDA_MspDeInit(hirda);
   
-  hirda->ErrorCode = HAL_IRDA_ERROR_NONE; 
+  hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
+
   hirda->State = HAL_IRDA_STATE_RESET; 
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hirda);
+
   return HAL_OK;
 }
 
@@ -938,21 +943,33 @@
   * @param  hdma : DMA handle
   * @retval None
   */
-static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)   
+static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)
 {
   IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-  
+
   hirda->TxXferCount = 0;
-  
-  if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX) 
+
+  /* Wait for IRDA TC Flag */
+  if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, IRDA_TIMEOUT_VALUE) != HAL_OK)
   {
-    hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    /* Timeout Occured */ 
+    hirda->State = HAL_IRDA_STATE_TIMEOUT;
+    HAL_IRDA_ErrorCallback(hirda);
   }
   else
   {
-    hirda->State = HAL_IRDA_STATE_READY;
+    /* No Timeout */
+    /* Check if a receive process is ongoing or not */
+    if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
+    {
+      hirda->State = HAL_IRDA_STATE_BUSY_RX;
+    }
+    else
+    {
+      hirda->State = HAL_IRDA_STATE_READY;
+    }
+    HAL_IRDA_TxCpltCallback(hirda);
   }
-  HAL_IRDA_TxCpltCallback(hirda);
 }
 
 /**

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_irda.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_irda.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_irda.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of IRDA HAL module.
   ******************************************************************************
   * @attention
@@ -348,8 +348,8 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
 HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
-__weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
-__weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
 
 /* IO operation functions *******************************************************/
 HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
@@ -359,9 +359,9 @@
 HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
 void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
-__weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
-__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
-__weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
 
 /* Peripheral State functions  **************************************************/
 HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_iwdg.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_iwdg.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_iwdg.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   IWDG HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Independent Watchdog (IWDG) peripheral:
@@ -217,18 +217,6 @@
 }
 
 /**
-  * @brief  DeInitializes the IWDG MSP.
-  * @param  hiwdg: IWDG handle
-  * @retval None
-  */
-__weak void HAL_IWDG_MspDeInit(IWDG_HandleTypeDef *hiwdg)
-{
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_IWDG_MspDeInit could be implemented in the user file
-   */
-}
-
-/**
   * @}
   */
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_iwdg.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_iwdg.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_iwdg.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of IWDG HAL module.
   ******************************************************************************
   * @attention
@@ -54,7 +54,7 @@
   * @{
   */ 
 
-/* Exported types ------------------------------------------------------------*/ 
+/* Exported types ------------------------------------------------------------*/
 
 /** 
   * @brief  IWDG HAL State Structure definition  
@@ -63,7 +63,7 @@
 {
   HAL_IWDG_STATE_RESET     = 0x00,  /*!< IWDG not yet initialized or disabled */
   HAL_IWDG_STATE_READY     = 0x01,  /*!< IWDG initialized and ready for use   */
-  HAL_IWDG_STATE_BUSY      = 0x02,  /*!< IWDG internal process is ongoing     */ 
+  HAL_IWDG_STATE_BUSY      = 0x02,  /*!< IWDG internal process is ongoing     */
   HAL_IWDG_STATE_TIMEOUT   = 0x03,  /*!< IWDG timeout state                   */
   HAL_IWDG_STATE_ERROR     = 0x04   /*!< IWDG error state                     */
     
@@ -78,7 +78,7 @@
                             This parameter can be a value of @ref IWDG_Prescaler */
   
   uint32_t Reload;     /*!< Specifies the IWDG down-counter reload value. 
-                            This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */                                    
+                            This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
 
 }IWDG_InitTypeDef;
 
@@ -221,16 +221,15 @@
 
 /* Exported functions --------------------------------------------------------*/
 
-/* Initialization/de-initialization functions  **********************************/
+/* Initialization/de-initialization functions  ********************************/
 HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
-__weak void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
-__weak void HAL_IWDG_MspDeInit(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
 
-/* I/O operation functions ******************************************************/
+/* I/O operation functions ****************************************************/
 HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
 HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
 
-/* Peripheral State functions  **************************************************/
+/* Peripheral State functions  ************************************************/
 HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
 
 /**

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_ltdc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_ltdc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_ltdc.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   LTDC HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the LTDC peripheral:
@@ -60,7 +60,7 @@
       (+) __HAL_LTDC_CLEAR_FLAG: Clears the LTDC pending flags.
       (+) __HAL_LTDC_ENABLE_IT: Enables the specified LTDC interrupts. 
       (+) __HAL_LTDC_DISABLE_IT: Disables the specified LTDC interrupts.
-      (+) __HAL_LTDC_IT_STATUS: Checks whether the specified LTDC interrupt has occurred or not.
+      (+) __HAL_LTDC_GET_IT_SOURCE: Checks whether the specified LTDC interrupt has occurred or not.
       
      [..] 
        (@) You can refer to the LTDC HAL driver header file for more useful macros
@@ -247,6 +247,9 @@
   /* Initialize the LTDC state*/
   hltdc->State = HAL_LTDC_STATE_RESET;
 
+  /* Release Lock */
+  __HAL_UNLOCK(hltdc);
+
   return HAL_OK;
 }
 
@@ -304,7 +307,7 @@
   /* Transfer Error Interrupt management ***************************************/
   if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_TE) != RESET)
   {
-    if(__HAL_LTDC_IT_STATUS(hltdc, LTDC_IT_TE) != RESET)
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_TE) != RESET)
     {
       /* Disable the transfer Error interrupt */
       __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE);
@@ -328,7 +331,7 @@
   /* FIFO underrun Interrupt management ***************************************/
   if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_FU) != RESET)
   {
-    if(__HAL_LTDC_IT_STATUS(hltdc, LTDC_IT_FU) != RESET)
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_FU) != RESET)
     {
       /* Disable the FIFO underrun interrupt */
       __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU);
@@ -352,7 +355,7 @@
   /* Line Interrupt management ************************************************/
   if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_LI) != RESET)
   {
-    if(__HAL_LTDC_IT_STATUS(hltdc, LTDC_IT_LI) != RESET)
+    if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_LI) != RESET)
     {
       /* Disable the Line interrupt */
       __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_ltdc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_ltdc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_ltdc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of LTDC HAL module.
   ******************************************************************************
   * @attention
@@ -524,17 +524,17 @@
   *            @arg LTDC_IT_RR: Register Reload Interrupt Flag
   * @retval The state of INTERRUPT (SET or RESET).
   */
-#define __HAL_LTDC_IT_STATUS(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
     
 /* Exported functions --------------------------------------------------------*/  
 
 /* Initialization and de-initialization functions *******************************/
 HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
 HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
-__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
-__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
-__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
-__weak void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc);
 
 /* IO operation functions *******************************************************/
 void  HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_nand.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_nand.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_nand.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   NAND HAL module driver.
   *          This file provides a generic firmware to drive NAND memories mounted 
   *          as external device.
@@ -154,13 +154,12 @@
   FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank);
   
   /* Enable the NAND device */
-  __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank);   
+  __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank);
   
   /* Update the NAND controller state */
-  hnand->State = HAL_NAND_STATE_READY;  
-  
+  hnand->State = HAL_NAND_STATE_READY;
+
   return HAL_OK;
-
 }
 
 /**
@@ -172,12 +171,17 @@
 {
   /* Initialize the low level hardware (MSP) */
   HAL_NAND_MspDeInit(hnand);
-  
+
   /* Configure the NAND registers with their reset values */
   FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
 
-  return HAL_OK;  
-  
+  /* Reset the NAND controller state */
+  hnand->State = HAL_NAND_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hnand);
+
+  return HAL_OK;
 }
 
 /**

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_nand.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_nand.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_nand.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of NAND HAL module.
   ******************************************************************************
   * @attention
@@ -193,10 +193,10 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef  HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
 HAL_StatusTypeDef  HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
-__weak void        HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
-__weak void        HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void        HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void        HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
 void               HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
-__weak void        HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+void        HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
 
 /* IO operation functions  *****************************************************/
 HAL_StatusTypeDef  HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_nor.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_nor.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_nor.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   NOR HAL module driver.
   *          This file provides a generic firmware to drive NOR memories mounted 
   *          as external device.
@@ -94,12 +94,11 @@
   * @{
   */
 #ifdef HAL_NOR_MODULE_ENABLED
-
 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/    
+/* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
 
@@ -144,7 +143,7 @@
   {
     /* Initialize the low level hardware (MSP) */
     HAL_NOR_MspInit(hnor);
-  }    
+  }
 
   /* Initialize NOR control Interface */
   FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
@@ -154,15 +153,14 @@
 
   /* Initialize NOR extended mode timing Interface */
   FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
-  
+
   /* Enable the NORSRAM device */
   __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);  
-  
+
   /* Check the NOR controller state */
   hnor->State = HAL_NOR_STATE_READY; 
   
   return HAL_OK;
-
 }
 
 /**
@@ -172,9 +170,6 @@
   */
 HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)  
 {
-  /* Update the NOR controller state */
-  hnor->State = HAL_NOR_STATE_BUSY;
-  
   /* De-Initialize the low level hardware (MSP) */
   HAL_NOR_MspDeInit(hnor);
  
@@ -182,8 +177,11 @@
   FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
   
   /* Update the NOR controller state */
-  hnor->State = HAL_NOR_STATE_READY;  
-    
+  hnor->State = HAL_NOR_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hnor);
+
   return HAL_OK;
 }
 
@@ -309,7 +307,6 @@
   return HAL_OK;
 }
 
-
 /**
   * @brief  Read data from NOR memory 
   * @param  hnor: pointer to NOR handle
@@ -348,7 +345,6 @@
   return HAL_OK;  
 }
 
-
 /**
   * @brief  Program data to NOR memory 
   * @param  hnor: pointer to NOR handle
@@ -387,7 +383,6 @@
   return HAL_OK;  
 }
 
-
 /**
   * @brief  Reads a block of data from the FMC NOR memory.
   * @param  hnor: pointer to NOR handle
@@ -433,7 +428,6 @@
   return HAL_OK;  
 }
 
-
 /**
   * @brief  Writes a half-word buffer to the FMC NOR memory. This function 
   *         must be used only with S29GL128P NOR memory. 
@@ -536,7 +530,6 @@
  
 }
 
-
 /**
   * @brief  Erase the entire NOR chip.
   * @param  hnor: pointer to NOR handle
@@ -574,7 +567,6 @@
   return HAL_OK;  
 }
 
-
 /**
   * @brief  Read NOR flash CFI IDs
   * @param  hnor: pointer to NOR handle
@@ -613,7 +605,6 @@
   return HAL_OK;
 }
 
-
 /**
   * @}
   */
@@ -624,7 +615,7 @@
 @verbatim   
   ==============================================================================
                         ##### NOR Control functions #####
-  ==============================================================================  
+  ==============================================================================
   [..]
     This subsection provides a set of functions allowing to control dynamically
     the NOR interface.

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_nor.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_nor.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_nor.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of NOR HAL module.
   ******************************************************************************
   * @attention
@@ -190,16 +190,16 @@
   * @param  __DATA__: Data to write
   * @retval None
   */
-#define __NOR_WRITE(__ADDRESS__, __DATA__)  (*(__IO uint32_t *)(__ADDRESS__) = (__DATA__))
+#define __NOR_WRITE(__ADDRESS__, __DATA__)  (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__))
 
 /* Exported functions --------------------------------------------------------*/
 
 /* Initialization/de-initialization functions  **********************************/  
 HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
 HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
-__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
-__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
-__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
 
 /* I/O operation functions  *****************************************************/
 HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pccard.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pccard.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_pccard.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   PCCARD HAL module driver.
   *          This file provides a generic firmware to drive PCCARD memories mounted 
   *          as external device.
@@ -86,12 +86,11 @@
   * @{
   */
 #ifdef HAL_PCCARD_MODULE_ENABLED
-
 #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/    
+/* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
 /* Private functions ---------------------------------------------------------*/
@@ -169,18 +168,18 @@
   */
 HAL_StatusTypeDef  HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard)
 {
-  /* Update the PCCARD controller state */
-  hpccard->State = HAL_PCCARD_STATE_BUSY;
-  
   /* De-Initialize the low level hardware (MSP) */
-  HAL_PCCARD_MspDeInit(hpccard);  
+  HAL_PCCARD_MspDeInit(hpccard);
    
   /* Configure the PCCARD registers with their reset values */
   FMC_PCCARD_DeInit(hpccard->Instance);
   
   /* Update the PCCARD controller state */
   hpccard->State = HAL_PCCARD_STATE_RESET;
-    
+
+  /* Release Lock */
+  __HAL_UNLOCK(hpccard);
+
   return HAL_OK; 
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pccard.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pccard.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_pccard.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of PCCARD HAL module.
   ******************************************************************************
   * @attention
@@ -143,8 +143,8 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef  HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
 HAL_StatusTypeDef  HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);   
-__weak void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
-__weak void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
 
 /* IO operation functions  *****************************************************/
 HAL_StatusTypeDef  HAL_CF_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
@@ -153,7 +153,7 @@
 HAL_StatusTypeDef  HAL_CF_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
 HAL_StatusTypeDef  HAL_CF_Reset(PCCARD_HandleTypeDef *hpccard);
 void               HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
-__weak void        HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
+void        HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
 
 /* PCCARD State functions *******************************************************/
 HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pcd.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pcd.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_pcd.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   PCD HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the USB Peripheral Controller:
@@ -177,11 +177,9 @@
  /* Init Device */
  USB_DevInit(hpcd->Instance, hpcd->Init);
  
- /* Enable the Interrupts */
- __HAL_PCD_ENABLE(hpcd);
- 
  hpcd->State= PCD_READY;
  
+ USB_DevDisconnect (hpcd->Instance);  
  return HAL_OK;
 }
 
@@ -200,6 +198,9 @@
 
   hpcd->State = PCD_BUSY;
   
+  /* Stop Device */
+  HAL_PCD_Stop(hpcd);
+    
   /* DeInit the low level hardware */
   HAL_PCD_MspDeInit(hpcd);
   
@@ -413,8 +414,6 @@
           }       
           if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE)
           {
-            fifoemptymsk = 0x1 << epnum;
-            USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
             PCD_WriteEmptyTxFifo(hpcd , epnum);
           }
         }
@@ -423,33 +422,9 @@
       }
     }
     
-    /* Handle Suspend Interrupt */
-    if(__HAL_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
-    {
-
-      HAL_PCD_SuspendCallback(hpcd);
-      
-      if( (hpcd->Init.low_power_enable) && \
-        ( (USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS))
-      {
-        /* un-gate USB Core clock */
-        USBx_PCGCCTL |= (USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK);
-        
-        /* Request to enter Sleep mode after exit from current ISR */
-        SCB->SCR |= (SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk);
-      }
-      __HAL_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
-    }
-    
     /* Handle Resume Interrupt */
     if(__HAL_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT))
-    {
-     if( hpcd->Init.low_power_enable)
-     {
-       /* un-gate USB Core clock */
-       USBx_PCGCCTL &= ~(USB_OTG_PCGCCTL_STOPCLK | USB_OTG_PCGCCTL_GATECLK);
-     }
-     
+    {    
      /* Clear the Remote Wake-up Signaling */
       USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
      
@@ -457,6 +432,20 @@
 
      __HAL_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT);
     }
+    
+    /* Handle Suspend Interrupt */
+    if(__HAL_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
+    {
+
+      if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+      {
+        
+        HAL_PCD_SuspendCallback(hpcd);
+      }
+      __HAL_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
+    }
+    
+
 
     /* Handle Reset Interrupt */
     if(__HAL_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
@@ -488,8 +477,6 @@
       
       /* setup EP0 to receive SETUP packets */
       USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
-            
-      HAL_PCD_ResetCallback(hpcd);
         
       __HAL_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST);
     }
@@ -512,6 +499,9 @@
         hpcd->Init.ep0_mps          = USB_OTG_FS_MAX_PACKET_SIZE ;  
         hpcd->Instance->GUSBCFG |= (USB_OTG_GUSBCFG_TRDT_0 | USB_OTG_GUSBCFG_TRDT_2);
       }
+      
+      HAL_PCD_ResetCallback(hpcd);
+      
       __HAL_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
     }
     
@@ -641,6 +631,7 @@
    */ 
 }
 
+
 /**
   * @brief  Suspend event callbacks
   * @param  hpcd: PCD handle
@@ -1054,17 +1045,27 @@
   
   Tx_Offset = hpcd->Instance->GRXFSIZ;
   
-  for (i = 0; i < fifo; i++)
+  if(fifo == 0)
   {
-    Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
+    hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (size << 16) | Tx_Offset;
   }
-  
-  /* Multiply Tx_Size by 2 to get higher performance */
-  hpcd->Instance->DIEPTXF[fifo] = (size << 16) | Tx_Offset;
+  else
+  {
+    Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
+    for (i = 0; i < (fifo - 1); i++)
+    {
+      Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
+    }
+    
+    /* Multiply Tx_Size by 2 to get higher performance */
+    hpcd->Instance->DIEPTXF[fifo - 1] = (size << 16) | Tx_Offset;
+    
+  }
   
   return HAL_OK;
 }
 
+
 /**
   * @brief  Update FIFO configuration
   * @param  hpcd: PCD handle
@@ -1078,6 +1079,37 @@
   return HAL_OK;
 }
 
+
+/**
+  * @brief  HAL_PCD_ActiveRemoteWakeup : active remote wakeup signalling
+  * @param  hpcd: PCD handle
+  * @retval status
+  */
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;  
+    
+  if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
+  {
+    /* active Remote wakeup signaling */
+    USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
+  }
+  return HAL_OK;  
+}
+
+/**
+  * @brief  HAL_PCD_DeActiveRemoteWakeup : de-active remote wakeup signalling
+  * @param  hpcd: PCD handle
+  * @retval status
+  */
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd)
+{
+  USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;  
+  
+  /* active Remote wakeup signaling */
+   USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
+  return HAL_OK;  
+}
 /**
   * @}
   */
@@ -1120,9 +1152,10 @@
 {
   USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;  
   USB_OTG_EPTypeDef *ep;
-  uint32_t len = 0;
+  int32_t len = 0;
   uint32_t len32b;
-  
+  uint32_t fifoemptymsk = 0;
+
   ep = &hpcd->IN_ep[epnum];
   len = ep->xfer_len - ep->xfer_count;
   
@@ -1131,6 +1164,7 @@
     len = ep->maxpacket;
   }
   
+  
   len32b = (len + 3) / 4;
  
   while  ( (USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b &&
@@ -1152,6 +1186,13 @@
     ep->xfer_count += len;
   }
   
+  if(len <= 0)
+  {
+    fifoemptymsk = 0x1 << epnum;
+    USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
+    
+  }
+  
   return HAL_OK;  
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pcd.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pcd.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_pcd.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of PCD HAL module.
   ******************************************************************************
   * @attention
@@ -98,8 +98,7 @@
   */
 #define PCD_SPEED_HIGH               0
 #define PCD_SPEED_HIGH_IN_FULL       1
-#define PCD_SPEED_LOW                2  
-#define PCD_SPEED_FULL               3
+#define PCD_SPEED_FULL               2
 /**
   * @}
   */
@@ -142,7 +141,68 @@
    
 #define __HAL_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
 #define __HAL_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) |= (__INTERRUPT__))
-#define __HAL_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)   
+#define __HAL_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__)             *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+                                                       ~(USB_OTG_PCGCCTL_STOPCLK)
+
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__)               *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+                                                      
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__)            ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+                                                         
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE      ((uint32_t)0x08) 
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE     ((uint32_t)0x0C) 
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE        ((uint32_t)0x10) 
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE      ((uint32_t)0x08) 
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE     ((uint32_t)0x0C) 
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE        ((uint32_t)0x10) 
+
+
+#define USB_HS_EXTI_LINE_WAKEUP              ((uint32_t)0x00100000)  /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_FS_EXTI_LINE_WAKEUP              ((uint32_t)0x00040000)  /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT()    EXTI->IMR |= (USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_GET_FLAG()     EXTI->PR & (USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG()   EXTI->PR = (USB_HS_EXTI_LINE_WAKEUP)
+
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(USB_HS_EXTI_LINE_WAKEUP);\
+                                                    EXTI->RTSR |= USB_HS_EXTI_LINE_WAKEUP
+
+                                                      
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER()  EXTI->FTSR |= (USB_HS_EXTI_LINE_WAKEUP);\
+                                                      EXTI->RTSR &= ~(USB_HS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER()   EXTI->RTSR &= ~(USB_HS_EXTI_LINE_WAKEUP);\
+                                                        EXTI->FTSR &= ~(USB_HS_EXTI_LINE_WAKEUP;)\
+                                                        EXTI->RTSR |= USB_HS_EXTI_LINE_WAKEUP;\
+                                                        EXTI->FTSR |= USB_HS_EXTI_LINE_WAKEUP
+
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT()    EXTI->IMR |= USB_FS_EXTI_LINE_WAKEUP
+#define __HAL_USB_FS_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_FS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_FS_EXTI_GET_FLAG()     EXTI->PR & (USB_FS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG()   EXTI->PR = USB_FS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+                                                    EXTI->RTSR |= USB_FS_EXTI_LINE_WAKEUP
+
+                                                      
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER()  EXTI->FTSR |= (USB_FS_EXTI_LINE_WAKEUP);\
+                                                      EXTI->RTSR &= ~(USB_FS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER()  EXTI->RTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+                                                       EXTI->FTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+                                                       EXTI->RTSR |= USB_FS_EXTI_LINE_WAKEUP;\
+                                                       EXTI->FTSR |= USB_FS_EXTI_LINE_WAKEUP  
+
 /**
   * @}
   */
@@ -161,17 +221,19 @@
 HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
 void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
 
-__weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-__weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-__weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
-__weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
-__weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
-__weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
-__weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
-__weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-__weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-__weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
-__weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+
 
 /* Peripheral Control functions  ************************************************/
 HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
@@ -187,7 +249,8 @@
 HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
 HAL_StatusTypeDef HAL_PCD_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
 HAL_StatusTypeDef HAL_PCD_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
-
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
 /* Peripheral State functions  **************************************************/
 PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_pwr.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   PWR HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Power Controller (PWR) peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_pwr.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of PWR HAL module.
   ******************************************************************************
   * @attention
@@ -312,7 +312,7 @@
 void        HAL_PWR_EnterSTANDBYMode(void);
 
 void        HAL_PWR_PVD_IRQHandler(void);
-__weak void HAL_PWR_PVDCallback(void);
+void HAL_PWR_PVDCallback(void);
 
 
 /**

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_pwr_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Extended PWR HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of PWR extension peripheral:           

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_pwr_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_pwr_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of PWR HAL Extension module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rcc.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   RCC HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Reset and Clock Control (RCC) peripheral:
@@ -85,7 +85,6 @@
 #define HSE_TIMEOUT_VALUE          HSE_STARTUP_TIMEOUT
 #define HSI_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
 #define LSI_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
-#define LSE_TIMEOUT_VALUE          ((uint32_t)5000) /* 5 s    */
 #define PLL_TIMEOUT_VALUE          ((uint32_t)100)  /* 100 ms */
 #define CLOCKSWITCH_TIMEOUT_VALUE  ((uint32_t)5000) /* 5 s    */
 
@@ -476,15 +475,23 @@
     /* Check the parameters */
     assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
     
-    /* Check the LSE State before enabling the access to the Bachup domain */
-    if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
+    /* Enable Power Clock*/
+    __PWR_CLK_ENABLE();
+    
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+    
+    /* Wait for Backup domain Write protection disable */
+    timeout = HAL_GetTick() + DBP_TIMEOUT_VALUE;
+    
+    while((PWR->CR & PWR_CR_DBP) == RESET)
     {
-      /* Enable Power Controller clock */
-      __PWR_CLK_ENABLE();
-      
-      /* Enable write access to Backup domain */
-      PWR->CR |= PWR_CR_DBP;
+      if(HAL_GetTick() >= timeout)
+      {
+        return HAL_TIMEOUT;
+      }      
     }
+
     /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
     __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
     

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rcc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of RCC HAL module.
   ******************************************************************************
   * @attention
@@ -186,8 +186,11 @@
 #define CIR_BYTE2_ADDRESS         ((uint32_t)(RCC_BASE + 0x0C + 0x02))
 
 /* BDCR register base address */
-#define BDCR_BYTE0_ADDRESS              (PERIPH_BASE + RCC_BDCR_OFFSET)
+#define BDCR_BYTE0_ADDRESS        (PERIPH_BASE + RCC_BDCR_OFFSET)
+
 
+#define DBP_TIMEOUT_VALUE          ((uint32_t)100)
+#define LSE_TIMEOUT_VALUE          ((uint32_t)5000)
 /**
   * @}
   */
@@ -195,6 +198,7 @@
 /** @defgroup RCC_Oscillator_Type
   * @{
   */
+#define RCC_OSCILLATORTYPE_NONE            ((uint32_t)0x00000000)
 #define RCC_OSCILLATORTYPE_HSE             ((uint32_t)0x00000001)
 #define RCC_OSCILLATORTYPE_HSI             ((uint32_t)0x00000002)
 #define RCC_OSCILLATORTYPE_LSE             ((uint32_t)0x00000004)
@@ -934,8 +938,8 @@
   *         RTC clock source).
   */
 #define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ?    \
-                                                 MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : 0
-
+                                                 MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+                                                   
 #define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__);    \
                                                     RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF);  \
                                                    } while (0)
@@ -1100,7 +1104,7 @@
 /** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST, 
   *        RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
   */
-#define __HAL_RCC_CLEAR_FLAG() (RCC->CSR |= RCC_CSR_RMVF)
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
 
 /** @brief  Check RCC flag is set or not.
   * @param  __FLAG__: specifies the flag to check.
@@ -1154,7 +1158,7 @@
 void HAL_RCC_NMI_IRQHandler(void);
 
 /* User Callbacks in non blocking mode (IT mode) */ 
-__weak void HAL_RCC_CCSCallback(void);
+void HAL_RCC_CCSCallback(void);
 
 /**
   * @}

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rcc_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Extension RCC HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities RCC extension peripheral:
@@ -76,16 +76,28 @@
     [..]
     This subsection provides a set of functions allowing to control the RCC Clocks 
     frequencies.
+    [..] 
+    (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
+        select the RTC clock source; in this case the Backup domain will be reset in  
+        order to modify the RTC Clock source, as consequence RTC registers (including 
+        the backup registers) and RCC_BDCR register are set to their reset values.
       
 @endverbatim
   * @{
   */
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) 
 /**
-  * @brief  Initializes the RCC extended peripherals clocks according to the specified parameters in the
-  *         RCC_PeriphCLKInitTypeDef.
+  * @brief  Initializes the RCC extended peripherals clocks according to the specified
+  *         parameters in the RCC_PeriphCLKInitTypeDef.
   * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
-  *         contains the configuration information for the Extended Peripherals clocks(I2S, SAI, LTDC RTC and TIM clocks).
+  *         contains the configuration information for the Extended Peripherals
+  *         clocks(I2S, SAI, LTDC RTC and TIM).
+  *         
+  * @note   Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select 
+  *         the RTC clock source; in this case the Backup domain will be reset in  
+  *         order to modify the RTC Clock source, as consequence RTC registers (including 
+  *         the backup registers) and RCC_BDCR register are set to their reset values.
+  *
   * @retval HAL status
   */
 HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
@@ -246,7 +258,51 @@
   /*---------------------------- RTC configuration -------------------------------*/
   if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
   {
-    __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+    /* Enable Power Clock*/
+    __PWR_CLK_ENABLE();
+    
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+    
+    /* Wait for Backup domain Write protection disable */
+    timeout = HAL_GetTick() + DBP_TIMEOUT_VALUE;
+    
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if(HAL_GetTick() >= timeout)
+      {
+        return HAL_TIMEOUT;
+      }      
+    }
+    
+    /* Reset the Backup domain only if the RTC Clock source selction is modified */ 
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg;
+    }
+    
+    /* If LSE is selected as RTC clock source, wait for LSE reactivation */
+    if(PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE)
+    {
+      /* Get timeout */
+      timeout = HAL_GetTick() + LSE_TIMEOUT_VALUE;
+      
+      /* Wait till LSE is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+      {
+        if(HAL_GetTick() >= timeout)
+        {
+          return HAL_TIMEOUT;
+        }      
+      }  
+    }
+    __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); 
   }
   
   /*---------------------------- TIM configuration -------------------------------*/
@@ -304,11 +360,17 @@
   *         RCC_PeriphCLKInitTypeDef.
   * @param  PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
   *         contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks).
+  *         
+  * @note   A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case 
+  *         the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup 
+  *        domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset
+  *              
   * @retval HAL status
   */
 HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef  *PeriphClkInit)
 {
   uint32_t timeout = 0;
+  uint32_t tmpreg = 0;
     
   /* Check the parameters */
   assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
@@ -356,7 +418,51 @@
   /*---------------------------- RTC configuration -------------------------------*/
   if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
   {
-    __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
+    /* Enable Power Clock*/
+    __PWR_CLK_ENABLE();
+    
+    /* Enable write access to Backup domain */
+    PWR->CR |= PWR_CR_DBP;
+    
+    /* Wait for Backup domain Write protection disable */
+    timeout = HAL_GetTick() + DBP_TIMEOUT_VALUE;
+    
+    while((PWR->CR & PWR_CR_DBP) == RESET)
+    {
+      if(HAL_GetTick() >= timeout)
+      {
+        return HAL_TIMEOUT;
+      }      
+    }
+        
+    /* Reset the Backup domain only if the RTC Clock source selction is modified */ 
+    if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
+    {
+      /* Store the content of BDCR register before the reset of Backup Domain */
+      tmpreg = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
+      /* RTC Clock selection can be changed only if the Backup Domain is reset */
+      __HAL_RCC_BACKUPRESET_FORCE();
+      __HAL_RCC_BACKUPRESET_RELEASE();
+      /* Restore the Content of BDCR register */
+      RCC->BDCR = tmpreg;
+    }
+      
+    /* If LSE is selected as RTC clock source, wait for LSE reactivation */
+    if(PeriphClkInit->RTCClockSelection == RCC_RTCCLKSOURCE_LSE)
+    {
+      /* Get timeout */
+      timeout = HAL_GetTick() + LSE_TIMEOUT_VALUE;
+      
+      /* Wait till LSE is ready */  
+      while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+      {
+        if(HAL_GetTick() >= timeout)
+        {
+          return HAL_TIMEOUT;
+        }      
+      }  
+    }
+    __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); 
   }
   
   return HAL_OK;

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rcc_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of RCC HAL Extension module.
   ******************************************************************************
   * @attention
@@ -154,7 +154,7 @@
   RCC_PLLI2SInitTypeDef PLLI2S;  /*!< PLL I2S structure parameters
                                       This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
 
-  uint8_t RTCClockSelection;      /*!< Specifies RTC Clock Prescalers Selection
+  uint32_t RTCClockSelection;      /*!< Specifies RTC Clock Prescalers Selection
                                       This parameter can be a value of @ref RCC_RTC_Clock_Source */
 
 }RCC_PeriphCLKInitTypeDef;

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rng.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rng.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rng.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   RNG HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Random Number Generator (RNG) peripheral:
@@ -118,9 +118,6 @@
     /* Init the low level hardware */
     HAL_RNG_MspInit(hrng);
   }
-  
-  /* Change RNG peripheral state */
-  hrng->State = HAL_RNG_STATE_BUSY;
 
   /* Enable the RNG Peripheral */
   __HAL_RNG_ENABLE(hrng);
@@ -132,7 +129,6 @@
   return HAL_OK;
 }
 
-
 /**
   * @brief  DeInitializes the RNG peripheral. 
   * @param  hrng: RNG handle
@@ -160,10 +156,13 @@
   /* DeInit the low level hardware */
   HAL_RNG_MspDeInit(hrng);
   
-  /* Update the RNG state */    
+  /* Update the RNG state */
   hrng->State = HAL_RNG_STATE_RESET; 
 
-  /* Return the function status */  
+  /* Release Lock */
+  __HAL_UNLOCK(hrng);
+  
+  /* Return the function status */
   return HAL_OK;
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rng.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rng.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rng.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of RNG HAL module.
   ******************************************************************************
   * @attention
@@ -182,15 +182,15 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
 HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng);
-__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
-__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
 
 /* Peripheral Control functions  ************************************************/
 uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng);
 uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng);
 void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
-__weak void HAL_RNG_ReadyCallback(RNG_HandleTypeDef* hrng);
-__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ReadyCallback(RNG_HandleTypeDef* hrng);
+void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
 
 /* Peripheral State functions  **************************************************/
 HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rtc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rtc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rtc.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   RTC HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Real Time Clock (RTC) peripheral:
@@ -151,18 +151,6 @@
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
-/* Masks Definition */
-#define RTC_TR_RESERVED_MASK    ((uint32_t)0x007F7F7F)
-#define RTC_DR_RESERVED_MASK    ((uint32_t)0x00FFFF3F) 
-#define RTC_INIT_MASK           ((uint32_t)0xFFFFFFFF)  
-#define RTC_RSF_MASK            ((uint32_t)0xFFFFFF5F)
-#define RTC_FLAGS_MASK          ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
-                                            RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
-                                            RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
-                                            RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
-                                            RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
-
-#define RTC_TIMEOUT_VALUE  1000
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
@@ -334,7 +322,7 @@
     hrtc->Instance->WUTR = (uint32_t)0x0000FFFF;
     hrtc->Instance->PRER = (uint32_t)0x007F00FF;
     hrtc->Instance->CALIBR = (uint32_t)0x00000000;
-    hrtc->Instance->ALRMAR = (uint32_t)0x00000000;        
+    hrtc->Instance->ALRMAR = (uint32_t)0x00000000;
     hrtc->Instance->ALRMBR = (uint32_t)0x00000000;
     hrtc->Instance->SHIFTR = (uint32_t)0x00000000;
     hrtc->Instance->CALR = (uint32_t)0x00000000;
@@ -363,13 +351,16 @@
   }
   
   /* Enable the write protection for RTC registers */
-  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);  
+  __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
   
   /* De-Initialize RTC MSP */
   HAL_RTC_MspDeInit(hrtc);
   
   hrtc->State = HAL_RTC_STATE_RESET; 
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hrtc);
+
   return HAL_OK;
 }
 
@@ -1030,7 +1021,10 @@
   {
     /* Disable the Alarm A interrupt */
     __HAL_RTC_ALARMA_DISABLE(hrtc);
-     
+
+    /* Clear flag alarm A */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
+
     timeout = HAL_GetTick() + RTC_TIMEOUT_VALUE;
     /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
     while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
@@ -1061,7 +1055,10 @@
   {
     /* Disable the Alarm B interrupt */
     __HAL_RTC_ALARMB_DISABLE(hrtc);
-        
+
+    /* Clear flag alarm B */
+    __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
+
     timeout = HAL_GetTick() + RTC_TIMEOUT_VALUE;
     /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
     while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rtc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rtc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rtc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of RTC HAL module.
   ******************************************************************************
   * @attention
@@ -694,8 +694,8 @@
 /* Initialization and de-initialization functions  ****************************/
 HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
 HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
-__weak void       HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
-__weak void       HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+void       HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void       HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
 
 /* RTC Time and Date functions ************************************************/
 HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
@@ -710,7 +710,7 @@
 HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
 void                HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
 HAL_StatusTypeDef   HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-__weak void         HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+void         HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
 
 /* Peripheral Control functions ***********************************************/
 HAL_StatusTypeDef   HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rtc_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rtc_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rtc_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   RTC HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Real Time Clock (RTC) Extension peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rtc_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rtc_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_rtc_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of RTC HAL Extension module.
   ******************************************************************************
   * @attention
@@ -638,9 +638,9 @@
 HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
 void              HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
 
-__weak void       HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
-__weak void       HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
-__weak void       HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+void       HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void       HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void       HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
 HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
 HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
 HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
@@ -651,7 +651,7 @@
 uint32_t          HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
 uint32_t          HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
 void              HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
-__weak void       HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+void       HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
 HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
 
 /* Extension Control functions ************************************************/
@@ -670,7 +670,7 @@
 HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
 
 /* Extension RTC features functions *******************************************/
-__weak void       HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); 
+void       HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); 
 HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
 
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sai.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sai.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_sai.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   SAI HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Serial Audio Interface (SAI) peripheral:
@@ -440,14 +440,14 @@
     /*Set MCKDIV value in CR1 register*/
     hsai->Instance->CR1 |= (tmpclock << 20);
 
-  } 
+  }
 
   /* Initialise the error code */
   hsai->ErrorCode = HAL_SAI_ERROR_NONE;
-    
+
   /* Initialize the SAI state */
   hsai->State= HAL_SAI_STATE_READY;
-  
+
   return HAL_OK;
 }
 
@@ -463,9 +463,9 @@
   {
     return HAL_ERROR;
   }
-   
+
   hsai->State = HAL_SAI_STATE_BUSY;
-  
+
   /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
   HAL_SAI_MspDeInit(hsai);
 
@@ -474,7 +474,10 @@
   
   /* Initialize the SAI state */
   hsai->State = HAL_SAI_STATE_RESET;
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsai);
+
   return HAL_OK;
 }
 
@@ -910,10 +913,17 @@
   /* Disable the SAI DMA request */
   hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
   
-  /* Disable the SAI DMA Stream */
-  __HAL_DMA_DISABLE(hsai->hdmatx);
-  __HAL_DMA_DISABLE(hsai->hdmarx);
-  
+  /* Abort the SAI DMA Tx Stream */
+  if(hsai->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(hsai->hdmatx);
+  }
+  /* Abort the SAI DMA Rx Stream */
+  if(hsai->hdmarx != NULL)
+  {  
+    HAL_DMA_Abort(hsai->hdmarx);
+  }
+
   /* Disable SAI peripheral */
   __HAL_SAI_DISABLE(hsai);
   
@@ -1219,19 +1229,37 @@
   */
 static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma)   
 {
-  SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef* )hdma)->Parent;
-   
-  hsai->TxXferCount = 0;
-  hsai->RxXferCount = 0;
+  uint32_t timeout = 0x00;
   
-  /* Disable SAI Tx DMA Request */  
-  hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
-  
-  /* Flush Fifo*/
-  hsai->Instance->CR2 |= SAI_xCR2_FFLUSH;
- 
-  hsai->State= HAL_SAI_STATE_READY;
-  
+  SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef* )hdma)->Parent;
+
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  { 
+    hsai->TxXferCount = 0;
+    hsai->RxXferCount = 0;
+    
+    /* Disable SAI Tx DMA Request */  
+    hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+
+    /* Set timeout: 10 is the max delay to send the remaining data in the SAI FIFO */
+    timeout = HAL_GetTick() + 10;
+    
+    /* Wait until FIFO is empty */    
+    while(__HAL_SAI_GET_FLAG(hsai, SAI_xSR_FLVL) != RESET)
+    {
+      /* Check for the Timeout */
+      if(HAL_GetTick() >= timeout)
+      {         
+        /* Update error code */
+        hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
+        
+        /* Change the SAI state */
+        HAL_SAI_ErrorCallback(hsai);
+      }
+    } 
+    
+    hsai->State= HAL_SAI_STATE_READY;
+  }
   HAL_SAI_TxCpltCallback(hsai);
 }
 
@@ -1255,12 +1283,14 @@
 static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma)   
 {
   SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-  
-  /* Disable Rx DMA Request */
-  hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
-  hsai->RxXferCount = 0;
-  
-  hsai->State = HAL_SAI_STATE_READY; 
+  if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
+  {
+    /* Disable Rx DMA Request */
+    hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
+    hsai->RxXferCount = 0;
+    
+    hsai->State = HAL_SAI_STATE_READY;
+  }
   HAL_SAI_RxCpltCallback(hsai); 
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sai.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sai.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_sai.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of SAI HAL module.
   ******************************************************************************
   * @attention
@@ -735,11 +735,11 @@
 
 /* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
 void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai);
-__weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
-__weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
-__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
-__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
-__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
 
 /* Peripheral State functions  **************************************************/
 HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sd.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sd.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_sd.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   SD card HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Secure Digital (SD) peripheral:

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sd.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sd.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_sd.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of SD HAL module.
   ******************************************************************************
   * @attention
@@ -610,8 +610,8 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
 HAL_StatusTypeDef   HAL_SD_DeInit (SD_HandleTypeDef *hsd);
-__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
-__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
 
 /* I/O operation functions  *****************************************************/
 /* Blocking mode: Polling */
@@ -623,12 +623,12 @@
 void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
 
 /* Callback in non blocking modes (DMA) */
-__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
-__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
-__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
-__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
-__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
-__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
 
 /* Non-Blocking mode: DMA */
 HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sdram.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sdram.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_sdram.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   SDRAM HAL module driver.
   *          This file provides a generic firmware to drive SDRAM memories mounted 
   *          as external device.
@@ -102,7 +102,6 @@
   * @{
   */
 #ifdef HAL_SDRAM_MODULE_ENABLED
-
 #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
 
 /* Private typedef -----------------------------------------------------------*/
@@ -176,10 +175,16 @@
 {
   /* Initialize the low level hardware (MSP) */
   HAL_SDRAM_MspDeInit(hsdram);
-  
+
   /* Configure the SDRAM registers with their reset values */
   FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank);
-  
+
+  /* Reset the SDRAM controller state */
+  hsdram->State = HAL_SDRAM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(hsdram);
+
   return HAL_OK;
 }
 
@@ -309,11 +314,11 @@
   {
     *pDstBuffer = *(__IO uint8_t *)pSdramAddress;  
     pDstBuffer++;
-    pSdramAddress++;               
+    pSdramAddress++;
   }
   
   /* Process Unlocked */
-  __HAL_UNLOCK(hsdram);       
+  __HAL_UNLOCK(hsdram);
   
   return HAL_OK; 
 }
@@ -352,7 +357,7 @@
   {
     *(__IO uint8_t *)pSdramAddress = *pSrcBuffer;
     pSrcBuffer++;
-    pSdramAddress++;           
+    pSdramAddress++;
   }
   
   /* Process Unlocked */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sdram.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sdram.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_sdram.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of SDRAM HAL module.
   ******************************************************************************
   * @attention
@@ -96,13 +96,13 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
 HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
-__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
-__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
 
 void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
-__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
-__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
-__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
 
 /* I/O operation functions  *****************************************************/
 HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_smartcard.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_smartcard.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_smartcard.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   SMARTCARD HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the SMARTCARD peripheral:
@@ -64,7 +64,7 @@
           add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
       (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT() 
       (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can 
-          add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback                                      
+          add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
       (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can 
           add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
 
@@ -76,7 +76,7 @@
           add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
       (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() 
       (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can 
-          add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback                                      
+          add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
       (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can 
           add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback    
 
@@ -140,6 +140,7 @@
 #ifdef HAL_SMARTCARD_MODULE_ENABLED
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
+#define SMARTCARD_TIMEOUT_VALUE  22000
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
@@ -291,7 +292,7 @@
   */
 HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc)
 {
-   /* Check the SMARTCARD handle allocation */
+  /* Check the SMARTCARD handle allocation */
   if(hsc == NULL)
   {
     return HAL_ERROR;
@@ -308,6 +309,9 @@
   hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
   hsc->State = HAL_SMARTCARD_STATE_RESET;
 
+  /* Release Lock */
+  __HAL_UNLOCK(hsc);
+
   return HAL_OK;
 }
 
@@ -899,7 +903,7 @@
   * @param hdma : DMA handle
   * @retval None
   */
-static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)   
+static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
 {
   SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
   
@@ -908,10 +912,20 @@
   /* Disable the DMA transfer for transmit request by setting the DMAT bit
   in the USART CR3 register */
   hsc->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
-  
-  hsc->State= HAL_SMARTCARD_STATE_READY;
-  
-  HAL_SMARTCARD_TxCpltCallback(hsc);
+
+  /* Wait for SMARTCARD TC Flag */
+  if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, SMARTCARD_TIMEOUT_VALUE) != HAL_OK)
+  {
+    /* Timeout Occured */ 
+    hsc->State = HAL_SMARTCARD_STATE_TIMEOUT;
+    HAL_SMARTCARD_ErrorCallback(hsc);
+  }
+  else
+  {
+    /* No Timeout */
+    hsc->State= HAL_SMARTCARD_STATE_READY;
+    HAL_SMARTCARD_TxCpltCallback(hsc);
+  }
 }
 
 /**

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_smartcard.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_smartcard.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_smartcard.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of SMARTCARD HAL module.
   ******************************************************************************
   * @attention
@@ -410,8 +410,8 @@
 HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
 HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
 HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
-__weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
-__weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
 /* IO operation functions *******************************************************/
 HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
@@ -420,9 +420,9 @@
 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
 void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
-__weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
-__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
-__weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
 
 /* Peripheral State functions  **************************************************/
 HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_spi.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_spi.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_spi.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   SPI HAL module driver.
   *    
   *          This file provides firmware functions to manage the following 
@@ -98,7 +98,7 @@
 /* Private function prototypes -----------------------------------------------*/
 static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi);
 static void SPI_TxISR(SPI_HandleTypeDef *hspi);
-static void SPI_RxClose_IRQHandler(SPI_HandleTypeDef *hspi);
+static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi);
 static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi);
 static void SPI_RxISR(SPI_HandleTypeDef *hspi);
 static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
@@ -229,6 +229,9 @@
   hspi->ErrorCode = HAL_SPI_ERROR_NONE;
   hspi->State = HAL_SPI_STATE_RESET;
 
+  /* Release Lock */
+  __HAL_UNLOCK(hspi);
+
   return HAL_OK;
 }
 
@@ -653,7 +656,7 @@
     /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
     if(hspi->State == HAL_SPI_STATE_READY)
     {
-      hspi->State     = HAL_SPI_STATE_BUSY_TX_RX;
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
     }
 
      /* Configure communication */   
@@ -1047,7 +1050,7 @@
     /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
     if(hspi->State == HAL_SPI_STATE_READY)
     {
-      hspi->State      = HAL_SPI_STATE_BUSY_TX_RX;
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
     }
 
     /* Configure communication */
@@ -1281,7 +1284,7 @@
     /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
     if(hspi->State == HAL_SPI_STATE_READY)
     {
-      hspi->State     = HAL_SPI_STATE_BUSY_TX_RX;
+      hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
     }
 
     /* Configure communication */
@@ -1305,9 +1308,15 @@
       __HAL_SPI_RESET_CRC(hspi);
     }
 
-    /* Set the SPI Rx DMA transfer complete callback because the last generated transfer request is 
-    the reception request (RXNE) */
-    hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+    /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
+    if(hspi->State == HAL_SPI_STATE_BUSY_RX)
+    {
+      hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
+    }
+    else
+    {
+      hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+    }
 
     /* Set the DMA error callback */
     hspi->hdmarx->XferErrorCallback = SPI_DMAError;
@@ -1518,13 +1527,10 @@
   */
 static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi)
 {
-  if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLED)
+  /* Wait until TXE flag is set to send data */
+  if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
   {
-    /* Wait until TXE flag is set to send data */
-    if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
-    {
-      hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
-    }
+    hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
   }
 
   /* Disable TXE interrupt */
@@ -1547,24 +1553,27 @@
       __HAL_SPI_CLEAR_OVRFLAG(hspi);
     }
     
-    /* Set state to READY before run the Callback Complete */
-    hspi->State = HAL_SPI_STATE_READY;
-
     /* Check if Errors has been detected during transfer */
     if(hspi->ErrorCode ==  HAL_SPI_ERROR_NONE)
     {
       /* Check if we are in Tx or in Rx/Tx Mode */
       if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
       {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
         HAL_SPI_TxRxCpltCallback(hspi);
       }
       else
       {
-        HAL_SPI_TxRxCpltCallback(hspi);
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
+        HAL_SPI_TxCpltCallback(hspi);
       }
     }
     else
     {
+      /* Set state to READY before run the Callback Complete */
+      hspi->State = HAL_SPI_STATE_READY;
       /* Call Error call back in case of Error */
       HAL_SPI_ErrorCallback(hspi);
     }
@@ -1607,7 +1616,7 @@
   * @param  hspi: SPI handle
   * @retval void
   */
-static void SPI_RxClose_IRQHandler(SPI_HandleTypeDef *hspi)
+static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi)
 {
   __IO uint16_t tmpreg;
 
@@ -1653,22 +1662,26 @@
       __HAL_SPI_DISABLE(hspi);
     }
     
-    /* Set state to READY before run the Callback Complete */
-    hspi->State = HAL_SPI_STATE_READY;
     /* Check if Errors has been detected during transfer */
     if(hspi->ErrorCode ==  HAL_SPI_ERROR_NONE)
     {
       /* Check if we are in Rx or in Rx/Tx Mode */
       if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
       {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
         HAL_SPI_TxRxCpltCallback(hspi);
       }else
       {
+        /* Set state to READY before run the Callback Complete */
+        hspi->State = HAL_SPI_STATE_READY;
         HAL_SPI_RxCpltCallback(hspi);
       }
     }
     else
     {
+      /* Set state to READY before run the Callback Complete */
+      hspi->State = HAL_SPI_STATE_READY;
       /* Call Error call back in case of Error */
       HAL_SPI_ErrorCallback(hspi);
     }
@@ -1697,7 +1710,7 @@
 
   if(hspi->RxXferCount==0)
   {
-    SPI_RxClose_IRQHandler(hspi);
+    SPI_RxCloseIRQHandler(hspi);
   }
 }
 
@@ -1730,7 +1743,7 @@
 
   if(hspi->RxXferCount == 0)
   {
-    SPI_RxClose_IRQHandler(hspi);
+    SPI_RxCloseIRQHandler(hspi);
   }
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_spi.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_spi.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_spi.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of SPI HAL module.
   ******************************************************************************
   * @attention
@@ -448,10 +448,10 @@
 HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
 HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
 void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
-__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
-__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
-__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
-__weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
 
 /* Peripheral State and Control functions  **************************************/
 HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sram.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sram.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_sram.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   SRAM HAL module driver.
   *          This file provides a generic firmware to drive SRAM memories  
   *          mounted as external device.
@@ -180,7 +180,12 @@
    
   /* Configure the SRAM registers with their reset values */
   FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
-      
+
+  hsram->State = HAL_SRAM_STATE_RESET;
+  
+  /* Release Lock */
+  __HAL_UNLOCK(hsram);
+
   return HAL_OK;
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sram.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_sram.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_sram.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of SRAM HAL module.
   ******************************************************************************
   * @attention
@@ -104,8 +104,8 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
 HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
-__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
-__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
 
 /* I/O operation functions  *****************************************************/
 HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
@@ -117,8 +117,8 @@
 HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
 HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
 
-__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
-__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
 
 /* SRAM Control functions  ******************************************************/
 HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_tim.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   TIM HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Timer (TIM) peripheral:
@@ -248,6 +248,9 @@
   /* Change TIM state */  
   htim->State = HAL_TIM_STATE_RESET; 
   
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
   return HAL_OK;
 }
 
@@ -511,7 +514,10 @@
     
   /* Change TIM state */  
   htim->State = HAL_TIM_STATE_RESET; 
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
   return HAL_OK;
 }
 
@@ -1005,7 +1011,10 @@
     
   /* Change TIM state */  
   htim->State = HAL_TIM_STATE_RESET; 
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
   return HAL_OK;
 }
 
@@ -1502,7 +1511,10 @@
     
   /* Change TIM state */  
   htim->State = HAL_TIM_STATE_RESET;
-   
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
   return HAL_OK;
 }
 
@@ -1971,8 +1983,11 @@
   HAL_TIM_OnePulse_MspDeInit(htim);
     
   /* Change TIM state */  
-  htim->State = HAL_TIM_STATE_RESET; 
-  
+  htim->State = HAL_TIM_STATE_RESET;
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
   return HAL_OK;
 }
 
@@ -2274,8 +2289,11 @@
   HAL_TIM_Encoder_MspDeInit(htim);
     
   /* Change TIM state */  
-  htim->State = HAL_TIM_STATE_RESET; 
-  
+  htim->State = HAL_TIM_STATE_RESET;
+ 
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
   return HAL_OK;
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_tim.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of TIM HAL module.
   ******************************************************************************
   * @attention
@@ -1414,12 +1414,12 @@
 uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
 
 /* Callback in non blocking modes (Interrupt and DMA) *************************/
-__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
-__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
-__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
-__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
-__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
-__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
 
 /* Peripheral State functions  **************************************************/
 HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim_ex.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim_ex.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_tim_ex.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   TIM HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Timer extension peripheral:
@@ -236,7 +236,10 @@
     
   /* Change TIM state */  
   htim->State = HAL_TIM_STATE_RESET; 
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(htim);
+
   return HAL_OK;
 }
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim_ex.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_tim_ex.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_tim_ex.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of TIM HAL Extension module.
   ******************************************************************************
   * @attention
@@ -209,8 +209,8 @@
 HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
 
 /* Extension Callback *********************************************************/
-__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
-__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
 void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
 
 /* Extension Peripheral State functions  **************************************/

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_uart.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_uart.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_uart.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   UART HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
@@ -168,6 +168,7 @@
     
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
+#define UART_TIMEOUT_VALUE  22000
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
@@ -466,7 +467,10 @@
   
   huart->ErrorCode = HAL_UART_ERROR_NONE;
   huart->State = HAL_UART_STATE_RESET;
-  
+
+  /* Process Lock */
+  __HAL_UNLOCK(huart);
+
   return HAL_OK;
 }
 
@@ -1008,6 +1012,12 @@
     /* Disable the UART DMA Rx request */
     huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
   }
+  else if (huart->State == HAL_UART_STATE_BUSY_TX_RX)
+  {
+    /* Disable the UART DMA Tx & Rx requests */
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
+    huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
+  }
   
   /* Process Unlocked */
   __HAL_UNLOCK(huart);
@@ -1035,6 +1045,12 @@
     /* Enable the UART DMA Rx request */
     huart->Instance->CR3 |= USART_CR3_DMAR;
   }
+  else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+  {
+    /* Enable the UART DMA Tx & Rx request */
+    huart->Instance->CR3 |= USART_CR3_DMAT;
+    huart->Instance->CR3 |= USART_CR3_DMAR;
+  }
 
   /* If the UART peripheral is still not enabled, enable it */
   if ((huart->Instance->CR1 & USART_CR1_UE) == 0)
@@ -1063,10 +1079,16 @@
   huart->Instance->CR3 &= ~USART_CR3_DMAT;
   huart->Instance->CR3 &= ~USART_CR3_DMAR;
   
-  /* Disable the UART DMA Stream */
-  __HAL_DMA_DISABLE(huart->hdmatx);
-  __HAL_DMA_DISABLE(huart->hdmarx);
-  
+  /* Abort the UART DMA tx Stream */
+  if(huart->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(huart->hdmatx);
+  }
+  /* Abort the UART DMA rx Stream */
+  if(huart->hdmarx != NULL)
+  {
+    HAL_DMA_Abort(huart->hdmarx);
+  }
   /* Disable UART peripheral */
   __HAL_UART_DISABLE(huart);
   
@@ -1442,17 +1464,28 @@
   /* Disable the DMA transfer for transmit request by setting the DMAT bit
      in the UART CR3 register */
   huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
-  
-  /* Check if a receive process is ongoing or not */
-  if(huart->State == HAL_UART_STATE_BUSY_TX_RX) 
+
+  /* Wait for UART TC Flag */
+  if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, UART_TIMEOUT_VALUE) != HAL_OK)
   {
-    huart->State = HAL_UART_STATE_BUSY_RX;
+    /* Timeout Occured */ 
+    huart->State = HAL_UART_STATE_TIMEOUT;
+    HAL_UART_ErrorCallback(huart);
   }
   else
   {
-    huart->State = HAL_UART_STATE_READY;
+    /* No Timeout */
+    /* Check if a receive process is ongoing or not */
+    if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
+    {
+      huart->State = HAL_UART_STATE_BUSY_RX;
+    }
+    else
+    {
+      huart->State = HAL_UART_STATE_READY;
+    }
+    HAL_UART_TxCpltCallback(huart);
   }
-  HAL_UART_TxCpltCallback(huart);
 }
 
 /**

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_uart.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_uart.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_uart.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of UART HAL module.
   ******************************************************************************
   * @attention
@@ -432,8 +432,8 @@
 HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
 HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethode);
 HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
-__weak void HAL_UART_MspInit(UART_HandleTypeDef *huart);
-__weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
 
 /* IO operation functions *******************************************************/
 HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
@@ -446,11 +446,11 @@
 HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
 HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
 void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
-__weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
-__weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
-__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
-__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
-__weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
 
 /* Peripheral Control functions  ************************************************/
 HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_usart.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_usart.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_usart.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   USART HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral:
@@ -151,6 +151,7 @@
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
 #define DYMMY_DATA      0xFFFF
+#define USART_TIMEOUT_VALUE  22000
 /* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
@@ -280,7 +281,10 @@
 
   husart->ErrorCode = HAL_USART_ERROR_NONE;
   husart->State = HAL_USART_STATE_RESET;
-  
+
+  /* Release Lock */
+  __HAL_UNLOCK(husart);
+
   return HAL_OK;
 }
 
@@ -1084,10 +1088,16 @@
   husart->Instance->CR3 &= ~USART_CR3_DMAT;
   husart->Instance->CR3 &= ~USART_CR3_DMAR;
 
-  /* Disable the USART DMA Stream */
-  __HAL_DMA_DISABLE(husart->hdmatx);
-  __HAL_DMA_DISABLE(husart->hdmarx);
-
+  /* Abort the USART DMA Tx Stream */
+  if(husart->hdmatx != NULL)
+  {
+    HAL_DMA_Abort(husart->hdmatx);
+  }
+  /* Abort the USART DMA Rx Stream */
+  if(husart->hdmarx != NULL)
+  {  
+    HAL_DMA_Abort(husart->hdmarx);
+  }
   /* Disable USART peripheral */
   __USART_DISABLE(husart);
 
@@ -1316,18 +1326,28 @@
   husart->TxXferCount = 0;
   if(husart->State == HAL_USART_STATE_BUSY_TX)
   {
-    /* Disable the DMA transfer for transmit request by setting the DMAT bit
-     in the USART CR3 register */
-    husart->Instance->CR3 &= ~(USART_CR3_DMAT);
-    husart->State= HAL_USART_STATE_READY;
+    /* Wait for USART TC Flag */
+    if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, USART_TIMEOUT_VALUE) != HAL_OK)
+    {
+      /* Timeout Occured */ 
+      husart->State = HAL_USART_STATE_TIMEOUT;
+      HAL_USART_ErrorCallback(husart);
+    }
+    else
+    {
+      /* No Timeout */
+      /* Disable the DMA transfer for transmit request by setting the DMAT bit
+       in the USART CR3 register */
+      husart->Instance->CR3 &= ~(USART_CR3_DMAT);
+      husart->State= HAL_USART_STATE_READY;
+    }
   }
   /* the usart state is HAL_USART_STATE_BUSY_TX_RX*/
   else
   {
     husart->State= HAL_USART_STATE_BUSY_RX;
+    HAL_USART_TxCpltCallback(husart);
   }
-
-  HAL_USART_TxCpltCallback(husart);
 }
 
 /**

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_usart.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_usart.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_usart.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of USART HAL module.
   ******************************************************************************
   * @attention
@@ -410,8 +410,8 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
 HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
-__weak void HAL_USART_MspInit(USART_HandleTypeDef *husart);
-__weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
 /* IO operation functions *******************************************************/
 HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
 HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
@@ -426,12 +426,12 @@
 HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
 HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
 void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
-__weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
-__weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
-__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
-__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
-__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
-__weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
 
 /* Peripheral State functions  **************************************************/
 HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_wwdg.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_wwdg.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_wwdg.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   WWDG HAL module driver.
   *          This file provides firmware functions to manage the following 
   *          functionalities of the Window Watchdog (WWDG) peripheral:
@@ -229,6 +229,9 @@
   /* Change WWDG peripheral state */    
   hwwdg->State = HAL_WWDG_STATE_RESET; 
 
+  /* Release Lock */
+  __HAL_UNLOCK(hwwdg);
+
   /* Return function status */
   return HAL_OK;
 }

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_wwdg.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_hal_wwdg.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_hal_wwdg.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of WWDG HAL module.
   ******************************************************************************
   * @attention
@@ -222,9 +222,9 @@
 /* Initialization/de-initialization functions  **********************************/
 HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
 HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
-__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
-__weak void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
-__weak void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
 
 /* I/O operation functions ******************************************************/
 HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_fmc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_fmc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_ll_fmc.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   FMC Low Layer HAL module driver.
   *    
   *          This file provides firmware functions to manage the following 
@@ -15,7 +15,7 @@
   @verbatim
   ==============================================================================
                         ##### FMC peripheral features #####
-  ==============================================================================                 
+  ==============================================================================
   [..] The Flexible memory controller (FMC) includes three memory controllers:
        (+) The NOR/PSRAM memory controller
        (+) The NAND/PC Card memory controller
@@ -91,7 +91,7 @@
 
 /* Private typedef -----------------------------------------------------------*/
 /* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/    
+/* Private macro -------------------------------------------------------------*/
 /* Private variables ---------------------------------------------------------*/
 /* Private function prototypes -----------------------------------------------*/
 /* Private functions ---------------------------------------------------------*/
@@ -170,7 +170,7 @@
   assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst));
   assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock)); 
   
-  /* Set NORSRAM device control parameters */                                     
+  /* Set NORSRAM device control parameters */
   tmpr = (uint32_t)(Init->DataAddressMux       |\
                     Init->MemoryType           |\
                     Init->MemoryDataWidth      |\
@@ -399,7 +399,7 @@
   * @brief    PCCARD Controller functions 
   *
   @verbatim 
-  ==============================================================================   
+  ==============================================================================
                     ##### How to use NAND device driver #####
   ==============================================================================
   [..]
@@ -1035,9 +1035,9 @@
                                                (((Timing->WriteRecoveryTime)-1) <<16)    |\
                                                (((Timing->RPDelay)-1) << 20)             |\
                                                (((Timing->RCDDelay)-1) << 24)
-                                               );                                                                                     
+                                               );
   }
-  else /* FMC_Bank2_SDRAM */                      
+  else /* FMC_Bank2_SDRAM */
   {  
 
     tmpr1 = (uint32_t)(((Timing->LoadToActiveDelay)-1)           |\
@@ -1161,7 +1161,7 @@
                     ((Command->ModeRegisterDefinition) << 9)     
                     );
     
-  Device->SDCMR = tmpr;                                                        
+  Device->SDCMR = tmpr;
    
   timeout = HAL_GetTick() + Timeout;
 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_fmc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_fmc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_ll_fmc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of FMC HAL module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_fsmc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_fsmc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_ll_fsmc.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   FSMC Low Layer HAL module driver.
   *    
   *          This file provides firmware functions to manage the following 
@@ -165,7 +165,7 @@
   assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
   assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
   
-  /* Set NORSRAM device control parameters */                                     
+  /* Set NORSRAM device control parameters */
   tmpr = (uint32_t)(Init->DataAddressMux       |\
                     Init->MemoryType           |\
                     Init->MemoryDataWidth      |\
@@ -312,7 +312,7 @@
 @verbatim   
   ==============================================================================
                       ##### FSMC_NORSRAM Control functions #####
-  ==============================================================================  
+  ==============================================================================
   [..]
     This subsection provides a set of functions allowing to control dynamically
     the FSMC NORSRAM interface.

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_fsmc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_fsmc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_ll_fsmc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of FSMC HAL module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_sdmmc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_sdmmc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_ll_sdmmc.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   SDMMC Low Layer HAL module driver.
   *    
   *          This file provides firmware functions to manage the following 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_sdmmc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_sdmmc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_ll_sdmmc.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of SDMMC HAL module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_usb.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_usb.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_ll_usb.c
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   USB Low Layer HAL module driver.
   *    
   *          This file provides firmware functions to manage the following 
@@ -112,10 +112,6 @@
     {
       USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
     }
-    else
-    {
-      USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSI;
-    }
     /* Reset after a PHY select  */
     USB_CoreReset(USBx); 
   }
@@ -124,26 +120,14 @@
     
     /* Select FS Embedded PHY */
     USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
-   
+    
     /* Reset after a PHY select and set Host mode */
     USB_CoreReset(USBx);
     
     /* Deactivate the power down*/
     USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
-   
-    /*Activate VBUS Sensing A & B */
-    USBx->GCCFG |= (USB_OTG_GCCFG_VBUSASEN | USB_OTG_GCCFG_VBUSBSEN);
-    
-    if (cfg.vbus_sensing_enable == ENABLE)
-    {
-      USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
-    }
   }
-  if (cfg.Sof_enable == ENABLE)
-  {
-    USBx->GCCFG |= USB_OTG_GCCFG_SOFOUTEN;
-  }
-  
+ 
   if(cfg.dma_enable == ENABLE)
   {
     USBx->GAHBCFG |= (USB_OTG_GAHBCFG_HBSTLEN_1 | USB_OTG_GAHBCFG_HBSTLEN_2);
@@ -216,6 +200,15 @@
 HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
 {
   uint32_t i = 0;
+
+  /*Activate VBUS Sensing B */
+  USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
+  
+  if (cfg.vbus_sensing_enable == 0)
+  {
+    USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+  }
+   
   /* Restart the Phy Clock */
   USBx_PCGCCTL = 0;
 
@@ -308,9 +301,14 @@
   /* Enable interrupts matching to the Device mode ONLY */
   USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
                     USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
-                    USB_OTG_GINTMSK_OEPINT   | USB_OTG_GINTMSK_SOFM   |\
-                    USB_OTG_GINTMSK_IISOIXFRM| USB_OTG_GINTMSK_PXFRM_IISOOXFRM);
+                    USB_OTG_GINTMSK_OEPINT   | USB_OTG_GINTMSK_IISOIXFRM|\
+                    USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
   
+  if(cfg.Sof_enable)
+  {
+    USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
+  }
+
   if (cfg.vbus_sensing_enable == ENABLE)
   {
     USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT); 
@@ -338,10 +336,11 @@
   {
     if (++count > 200000)
     {
-      break;
+      return HAL_TIMEOUT;
     }
   }
   while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
+  
   return HAL_OK;
 }
 
@@ -361,10 +360,11 @@
   {
     if (++count > 200000)
     {
-      break;
+      return HAL_TIMEOUT;
     }
   }
   while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
+  
   return HAL_OK;
 }
 
@@ -426,22 +426,24 @@
 {
   if (ep->is_in == 1)
   {
+   USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
+   
     if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
     {
       USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
-        ((ep->num + 1) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); 
+        ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); 
     } 
-   USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
+
   }
   else
   {
+     USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
+     
     if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
     {
       USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
-        ((ep->num + 1) << 22 ) | (USB_OTG_DOEPCTL_USBAEP));
+       (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
     } 
-    
-     USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
   }
   return HAL_OK;
 }
@@ -499,13 +501,16 @@
   /* Read DEPCTLn register */
   if (ep->is_in == 1)
   {
-   USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
    USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
+   USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));   
+   USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;   
   }
   else
   {
-     USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP; 
+
      USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
+     USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));     
+     USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;      
   }
   return HAL_OK;
 }
@@ -1077,10 +1082,9 @@
   /* Wait for AHB master IDLE state. */
   do
   {
-    HAL_Delay(1);
     if (++count > 200000)
     {
-      return HAL_OK;;
+      return HAL_TIMEOUT;
     }
   }
   while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0);
@@ -1093,14 +1097,11 @@
   {
     if (++count > 200000)
     {
-      break;
+      return HAL_TIMEOUT;
     }
   }
   while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
   
-  /* Wait for at least 3 PHY Clocks*/
-  HAL_Delay(1);
-  
   return HAL_OK;
 }
 
@@ -1120,9 +1121,13 @@
   /* Restart the Phy Clock */
   USBx_PCGCCTL = 0;
   
+  /* no VBUS sensing*/
+  USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN);
+  USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN);
+  USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
+  
   /* Disable the FS/LS support mode only */
-  if(((cfg.speed == USB_OTG_SPEED_FULL) || 
-      (cfg.speed == USB_OTG_SPEED_LOW))&&
+  if((cfg.speed == USB_OTG_SPEED_FULL)&&
      (USBx != USB_OTG_FS))
   {
     USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS; 
@@ -1160,7 +1165,7 @@
     /* set Rx FIFO size */
     USBx->GRXFSIZ  = (uint32_t )0x80; 
     USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_NPTXFD) | 0x80);
-    USBx->HPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0);
+    USBx->HPTXFSIZ = (uint32_t )(((0x40 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0);
 
   }
 
@@ -1169,7 +1174,7 @@
     /* set Rx FIFO size */
     USBx->GRXFSIZ  = (uint32_t )0x200; 
     USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x100 << 16)& USB_OTG_NPTXFD) | 0x200);
-    USBx->HPTXFSIZ = (uint32_t )(((0x100 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0x300);
+    USBx->HPTXFSIZ = (uint32_t )(((0xE0 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0x300);
   }
   
   /* Enable the common interrupts */
@@ -1180,12 +1185,9 @@
   
   /* Enable interrupts matching to the Host mode ONLY */
   USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM            | USB_OTG_GINTMSK_HCIM |\
-                    USB_OTG_GINTMSK_USBSUSPM         | USB_OTG_GINTMSK_SOFM |\
-                    USB_OTG_GINTMSK_PXFRM_IISOOXFRM  | USB_OTG_GINTMSK_WUIM |
-                    USB_OTG_GINTSTS_DISCINT);
+                    USB_OTG_GINTMSK_SOFM             |USB_OTG_GINTSTS_DISCINT|\
+                    USB_OTG_GINTMSK_PXFRM_IISOOXFRM  | USB_OTG_GINTMSK_WUIM);
 
-  
-    
   return HAL_OK;
 }
 
@@ -1233,7 +1235,7 @@
   
   USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);  
   HAL_Delay (10);                                /* See Note #1 */
-  USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0);  
+  USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0); 
   return HAL_OK;
 }
 
@@ -1396,7 +1398,7 @@
                              ((ep_type << 18) & USB_OTG_HCCHAR_EPTYP)|\
                              (mps & USB_OTG_HCCHAR_MPSIZ));
     
-  if (ep_type == HCCHAR_INTR)
+  if (ep_type == EP_TYPE_INTR)
   {
     USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
   }
@@ -1540,7 +1542,8 @@
   */
 HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
 {
-   
+  uint32_t count = 0;
+  
   /* Check for space in the request queue to issue the halt. */
   if (((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_CTRL << 18)) || ((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_BULK << 18)))
   {
@@ -1548,11 +1551,21 @@
     
     if ((USBx->HNPTXSTS & 0xFFFF) == 0)
     {
-       USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; 
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;  
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+      do 
+      {
+        if (++count > 1000) 
+        {
+          break;
+        }
+      } 
+      while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);     
     }
     else
     {
-       USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; 
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA; 
     }
   }
   else
@@ -1561,7 +1574,17 @@
     
     if ((USBx_HOST->HPTXSTS & 0xFFFF) == 0)
     {
-       USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA; 
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
+      USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;  
+      USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
+      do 
+      {
+        if (++count > 1000) 
+        {
+          break;
+        }
+      } 
+      while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);     
     }
     else
     {
@@ -1601,18 +1624,47 @@
 HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
 {
   uint8_t i;
+  uint32_t count = 0;
+  uint32_t value;
+  
   USB_DisableGlobalInt(USBx);
   
-  /* Halt all the Host Channels */
-  for (i = 0; i <= 15; i++)
-  {
-     USB_HC_Halt(USBx , i);
-  }
-  
-  /* Flush FIFO */
+    /* Flush FIFO */
   USB_FlushTxFifo(USBx, 0x10);
   USB_FlushRxFifo(USBx);
   
+  /* Flush out any leftover queued requests. */
+  for (i = 0; i <= 15; i++)
+  {   
+
+    value = USBx_HC(i)->HCCHAR ;
+    value |=  USB_OTG_HCCHAR_CHDIS;
+    value &= ~USB_OTG_HCCHAR_CHENA;  
+    value &= ~USB_OTG_HCCHAR_EPDIR;
+    USBx_HC(i)->HCCHAR = value;
+  }
+  
+  /* Halt all channels to put them into a known state. */  
+  for (i = 0; i <= 15; i++)
+  {   
+
+    value = USBx_HC(i)->HCCHAR ;
+    
+    value |= USB_OTG_HCCHAR_CHDIS;
+    value |= USB_OTG_HCCHAR_CHENA;  
+    value &= ~USB_OTG_HCCHAR_EPDIR;
+    
+    USBx_HC(i)->HCCHAR = value;
+    do 
+    {
+      if (++count > 1000) 
+      {
+        break;
+      }
+    } 
+    while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
+  }
+
   /* Clear any pending Host interrups */  
   USBx_HOST->HAINT = 0xFFFFFFFF;
   USBx->GINTSTS = 0xFFFFFFFF;

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_usb.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/stm32f4xx_ll_usb.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    stm32f4xx_ll_usb.h
   * @author  MCD Application Team
-  * @version V1.0.0RC2
-  * @date    04-February-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   Header file of USB Core HAL module.
   ******************************************************************************
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/system_stm32f4xx.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/system_stm32f4xx.c	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    system_stm32f4xx.c
   * @author  MCD Application Team
-  * @version V0.8.0
-  * @date    03-January-2014
+  * @version V1.0.0
+  * @date    18-February-2014
   * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
   *
   *   This file provides two functions and one global variable to be called from 
@@ -26,17 +26,27 @@
   *
   * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
   *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
-  *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */
@@ -72,13 +82,6 @@
   */
 
 /************************* Miscellaneous Configuration ************************/
-/*!< Uncomment the following line if you need to use external SRAM or SDRAM mounted
-     on STM324xG_EVAL/STM324x9I_EVAL boards as data memory  */
-/* #define DATA_IN_ExtSRAM */ 
-/* #define DATA_IN_ExtSDRAM */
-#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
- #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM " 
-#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
 
 /*!< Uncomment the following line if you need to relocate your vector Table in
      Internal SRAM. */
@@ -121,10 +124,6 @@
   * @{
   */
 
-#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
-  static void SystemInit_ExtMemCtl(void); 
-#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
-
 /**
   * @}
   */
@@ -165,10 +164,6 @@
   /* Disable all interrupts */
   RCC->CIR = 0x00000000;
 
-#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
-  SystemInit_ExtMemCtl(); 
-#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
-
   /* Configure the Vector Table location add offset address ------------------*/
 #ifdef VECT_TAB_SRAM
   SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
@@ -214,14 +209,14 @@
   *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
   *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
   *         
-  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal.h file (default value
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
   *             16 MHz) but the real value may vary depending on the variations
   *             in voltage and temperature.   
   *    
-  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal.h file (default value
-  *              25 MHz), user has to ensure that HSE_VALUE is same as the real
-  *              frequency of the crystal used. Otherwise, this function may
-  *              have wrong result.
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
   *                
   *         - The result of this function could be not correct when using fractional
   *           value for HSE crystal.
@@ -277,237 +272,6 @@
   SystemCoreClock >>= tmp;
 }
 
-#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
-/**
-  * @brief  Setup the external memory controller.
-  *         Called in startup_stm32f4xx.s before jump to main.
-  *         This function configures the external memories (SRAM/SDRAM)
-  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
-  * @param  None
-  * @retval None
-  */
-void SystemInit_ExtMemCtl(void)
-{
-#if defined (DATA_IN_ExtSDRAM)
-  register uint32_t tmpreg = 0, timeout = 0xFFFF;
-  register uint32_t index;
-
-  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface 
-      clock */
-  RCC->AHB1ENR |= 0x000001FC;
-  
-  /* Connect PCx pins to FMC Alternate function */
-  GPIOC->AFR[0]  = 0x0000000c;
-  GPIOC->AFR[1]  = 0x00007700;
-  /* Configure PCx pins in Alternate function mode */  
-  GPIOC->MODER   = 0x00a00002;
-  /* Configure PCx pins speed to 50 MHz */  
-  GPIOC->OSPEEDR = 0x00a00002;
-  /* Configure PCx pins Output type to push-pull */  
-  GPIOC->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PCx pins */ 
-  GPIOC->PUPDR   = 0x00500000;
-  
-  /* Connect PDx pins to FMC Alternate function */
-  GPIOD->AFR[0]  = 0x000000CC;
-  GPIOD->AFR[1]  = 0xCC000CCC;
-  /* Configure PDx pins in Alternate function mode */  
-  GPIOD->MODER   = 0xA02A000A;
-  /* Configure PDx pins speed to 50 MHz */  
-  GPIOD->OSPEEDR = 0xA02A000A;
-  /* Configure PDx pins Output type to push-pull */  
-  GPIOD->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PDx pins */ 
-  GPIOD->PUPDR   = 0x00000000;
-
-  /* Connect PEx pins to FMC Alternate function */
-  GPIOE->AFR[0]  = 0xC00000CC;
-  GPIOE->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PEx pins in Alternate function mode */ 
-  GPIOE->MODER   = 0xAAAA800A;
-  /* Configure PEx pins speed to 50 MHz */ 
-  GPIOE->OSPEEDR = 0xAAAA800A;
-  /* Configure PEx pins Output type to push-pull */  
-  GPIOE->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PEx pins */ 
-  GPIOE->PUPDR   = 0x00000000;
-
-  /* Connect PFx pins to FMC Alternate function */
-  GPIOF->AFR[0]  = 0xcccccccc;
-  GPIOF->AFR[1]  = 0xcccccccc;
-  /* Configure PFx pins in Alternate function mode */   
-  GPIOF->MODER   = 0xAA800AAA;
-  /* Configure PFx pins speed to 50 MHz */ 
-  GPIOF->OSPEEDR = 0xAA800AAA;
-  /* Configure PFx pins Output type to push-pull */  
-  GPIOF->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PFx pins */ 
-  GPIOF->PUPDR   = 0x00000000;
-
-  /* Connect PGx pins to FMC Alternate function */
-  GPIOG->AFR[0]  = 0xcccccccc;
-  GPIOG->AFR[1]  = 0xcccccccc;
-  /* Configure PGx pins in Alternate function mode */ 
-  GPIOG->MODER   = 0xaaaaaaaa;
-  /* Configure PGx pins speed to 50 MHz */ 
-  GPIOG->OSPEEDR = 0xaaaaaaaa;
-  /* Configure PGx pins Output type to push-pull */  
-  GPIOG->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PGx pins */ 
-  GPIOG->PUPDR   = 0x00000000;
-  
-  /* Connect PHx pins to FMC Alternate function */
-  GPIOH->AFR[0]  = 0x00C0CC00;
-  GPIOH->AFR[1]  = 0xCCCCCCCC;
-  /* Configure PHx pins in Alternate function mode */ 
-  GPIOH->MODER   = 0xAAAA08A0;
-  /* Configure PHx pins speed to 50 MHz */ 
-  GPIOH->OSPEEDR = 0xAAAA08A0;
-  /* Configure PHx pins Output type to push-pull */  
-  GPIOH->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PHx pins */ 
-  GPIOH->PUPDR   = 0x00000000;
-  
-  /* Connect PIx pins to FMC Alternate function */
-  GPIOI->AFR[0]  = 0xCCCCCCCC;
-  GPIOI->AFR[1]  = 0x00000CC0;
-  /* Configure PIx pins in Alternate function mode */ 
-  GPIOI->MODER   = 0x0028AAAA;
-  /* Configure PIx pins speed to 50 MHz */ 
-  GPIOI->OSPEEDR = 0x0028AAAA;
-  /* Configure PIx pins Output type to push-pull */  
-  GPIOI->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PIx pins */ 
-  GPIOI->PUPDR   = 0x00000000;
-  
-/*-- FMC Configuration ------------------------------------------------------*/
-  /* Enable the FMC interface clock */
-  RCC->AHB3ENR |= 0x00000001;
-  
-  /* Configure and enable SDRAM bank1 */
-  FMC_Bank5_6->SDCR[0] = 0x000029D0;
-  FMC_Bank5_6->SDTR[0] = 0x01115351;      
-  
-  /* SDRAM initialization sequence */
-  /* Clock enable command */
-  FMC_Bank5_6->SDCMR = 0x00000011; 
-  tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
-
-  /* Delay */
-  for (index = 0; index<1000; index++);
-  
-  /* PALL command */
-  FMC_Bank5_6->SDCMR = 0x00000012;           
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
-  
-  /* Auto refresh command */
-  FMC_Bank5_6->SDCMR = 0x00000073;
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  }
- 
-  /* MRD register program */
-  FMC_Bank5_6->SDCMR = 0x00046014;
-  timeout = 0xFFFF;
-  while((tmpreg != 0) && (timeout-- > 0))
-  {
-    tmpreg = FMC_Bank5_6->SDSR & 0x00000020; 
-  } 
-  
-  /* Set refresh count */
-  tmpreg = FMC_Bank5_6->SDRTR;
-  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
-  
-  /* Disable write protection */
-  tmpreg = FMC_Bank5_6->SDCR[0]; 
-  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
-#endif /* DATA_IN_ExtSDRAM */
-
-#if defined(DATA_IN_ExtSRAM)
-/*-- GPIOs Configuration -----------------------------------------------------*/
-   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
-  RCC->AHB1ENR   |= 0x00000078;
-  
-  /* Connect PDx pins to FMC Alternate function */
-  GPIOD->AFR[0]  = 0x00ccc0cc;
-  GPIOD->AFR[1]  = 0xcccccccc;
-  /* Configure PDx pins in Alternate function mode */  
-  GPIOD->MODER   = 0xaaaa0a8a;
-  /* Configure PDx pins speed to 100 MHz */  
-  GPIOD->OSPEEDR = 0xffff0fcf;
-  /* Configure PDx pins Output type to push-pull */  
-  GPIOD->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PDx pins */ 
-  GPIOD->PUPDR   = 0x00000000;
-
-  /* Connect PEx pins to FMC Alternate function */
-  GPIOE->AFR[0]  = 0xc00cc0cc;
-  GPIOE->AFR[1]  = 0xcccccccc;
-  /* Configure PEx pins in Alternate function mode */ 
-  GPIOE->MODER   = 0xaaaa828a;
-  /* Configure PEx pins speed to 100 MHz */ 
-  GPIOE->OSPEEDR = 0xffffc3cf;
-  /* Configure PEx pins Output type to push-pull */  
-  GPIOE->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PEx pins */ 
-  GPIOE->PUPDR   = 0x00000000;
-
-  /* Connect PFx pins to FMC Alternate function */
-  GPIOF->AFR[0]  = 0x00cccccc;
-  GPIOF->AFR[1]  = 0xcccc0000;
-  /* Configure PFx pins in Alternate function mode */   
-  GPIOF->MODER   = 0xaa000aaa;
-  /* Configure PFx pins speed to 100 MHz */ 
-  GPIOF->OSPEEDR = 0xff000fff;
-  /* Configure PFx pins Output type to push-pull */  
-  GPIOF->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PFx pins */ 
-  GPIOF->PUPDR   = 0x00000000;
-
-  /* Connect PGx pins to FMC Alternate function */
-  GPIOG->AFR[0]  = 0x00cccccc;
-  GPIOG->AFR[1]  = 0x000000c0;
-  /* Configure PGx pins in Alternate function mode */ 
-  GPIOG->MODER   = 0x00085aaa;
-  /* Configure PGx pins speed to 100 MHz */ 
-  GPIOG->OSPEEDR = 0x000cafff;
-  /* Configure PGx pins Output type to push-pull */  
-  GPIOG->OTYPER  = 0x00000000;
-  /* No pull-up, pull-down for PGx pins */ 
-  GPIOG->PUPDR   = 0x00000000;
-  
-/*-- FMC/FSMC Configuration --------------------------------------------------*/                                                                               
-  /* Enable the FMC/FSMC interface clock */
-  RCC->AHB3ENR         |= 0x00000001;
-  
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) 
-  /* Configure and enable Bank1_SRAM2 */
-  FMC_Bank1->BTCR[2]  = 0x00001011;
-  FMC_Bank1->BTCR[3]  = 0x00000201;
-  FMC_Bank1E->BWTR[2] = 0x0fffffff;
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ 
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
-  /* Configure and enable Bank1_SRAM2 */
-  FSMC_Bank1->BTCR[2]  = 0x00001011;
-  FSMC_Bank1->BTCR[3]  = 0x00000201;
-  FSMC_Bank1E->BWTR[2] = 0x0fffffff;
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
-
-#endif /* DATA_IN_ExtSRAM */
- 
-}
-#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
 /**
   * @}
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/system_stm32f4xx.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_F401RE/system_stm32f4xx.h	Wed Feb 26 09:45:12 2014 +0000
@@ -2,8 +2,8 @@
   ******************************************************************************
   * @file    system_stm32f4xx.h
   * @author  MCD Application Team
-  * @version V2.0.0RC6
-  * @date    03-February-2014
+  * @version V2.0.0
+  * @date    18-February-2014
   * @brief   CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.       
   ******************************************************************************  
   * @attention

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/misc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/misc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/misc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/misc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx.h	Wed Feb 26 09:45:12 2014 +0000
@@ -26,19 +26,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_adc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_adc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -65,19 +65,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_adc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_adc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_aes.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_aes.c	Wed Feb 26 09:45:12 2014 +0000
@@ -52,19 +52,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_aes.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_aes.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_aes_util.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_aes_util.c	Wed Feb 26 09:45:12 2014 +0000
@@ -30,19 +30,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_comp.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_comp.c	Wed Feb 26 09:45:12 2014 +0000
@@ -56,19 +56,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_comp.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_comp.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_conf.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_conf.h	Wed Feb 26 09:45:12 2014 +0000
@@ -8,19 +8,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_crc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_crc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -8,19 +8,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_crc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_crc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dac.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dac.c	Wed Feb 26 09:45:12 2014 +0000
@@ -83,19 +83,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dac.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dac.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dbgmcu.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dbgmcu.c	Wed Feb 26 09:45:12 2014 +0000
@@ -8,19 +8,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dbgmcu.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dbgmcu.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dma.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dma.c	Wed Feb 26 09:45:12 2014 +0000
@@ -52,19 +52,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dma.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_dma.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_exti.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_exti.c	Wed Feb 26 09:45:12 2014 +0000
@@ -45,19 +45,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_exti.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_exti.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash.c	Wed Feb 26 09:45:12 2014 +0000
@@ -75,19 +75,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash_ramfunc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_flash_ramfunc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -39,19 +39,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_fsmc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_fsmc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -12,19 +12,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_fsmc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_fsmc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_gpio.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_gpio.c	Wed Feb 26 09:45:12 2014 +0000
@@ -55,19 +55,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_gpio.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_gpio.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_i2c.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_i2c.c	Wed Feb 26 09:45:12 2014 +0000
@@ -57,19 +57,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_i2c.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_i2c.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_iwdg.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_iwdg.c	Wed Feb 26 09:45:12 2014 +0000
@@ -64,19 +64,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_iwdg.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_iwdg.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_lcd.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_lcd.c	Wed Feb 26 09:45:12 2014 +0000
@@ -61,19 +61,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_lcd.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_lcd.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_opamp.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_opamp.c	Wed Feb 26 09:45:12 2014 +0000
@@ -44,19 +44,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_opamp.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_opamp.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */ 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_pwr.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_pwr.c	Wed Feb 26 09:45:12 2014 +0000
@@ -17,19 +17,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_pwr.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_pwr.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_rcc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_rcc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -38,19 +38,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_rcc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_rcc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_rtc.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_rtc.c	Wed Feb 26 09:45:12 2014 +0000
@@ -204,19 +204,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_rtc.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_rtc.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_sdio.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_sdio.c	Wed Feb 26 09:45:12 2014 +0000
@@ -109,19 +109,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */ 

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_sdio.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_sdio.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_spi.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_spi.c	Wed Feb 26 09:45:12 2014 +0000
@@ -75,19 +75,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_spi.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_spi.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_syscfg.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_syscfg.c	Wed Feb 26 09:45:12 2014 +0000
@@ -49,19 +49,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_syscfg.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_syscfg.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_tim.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_tim.c	Wed Feb 26 09:45:12 2014 +0000
@@ -89,19 +89,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_tim.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_tim.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_usart.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_usart.c	Wed Feb 26 09:45:12 2014 +0000
@@ -58,19 +58,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_usart.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_usart.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_wwdg.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_wwdg.c	Wed Feb 26 09:45:12 2014 +0000
@@ -65,19 +65,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_wwdg.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_wwdg.h	Wed Feb 26 09:45:12 2014 +0000
@@ -9,19 +9,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/system_stm32l1xx.c	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/system_stm32l1xx.c	Wed Feb 26 09:45:12 2014 +0000
@@ -72,19 +72,29 @@
   *=============================================================================
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */

--- a/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/system_stm32l1xx.h	Mon Feb 24 10:30:08 2014 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/system_stm32l1xx.h	Wed Feb 26 09:45:12 2014 +0000
@@ -8,19 +8,29 @@
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
-  *
-  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
-  * You may not use this file except in compliance with the License.
-  * You may obtain a copy of the License at:
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
   *
-  *        http://www.st.com/software_license_agreement_liberty_v2
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
   *
-  * Unless required by applicable law or agreed to in writing, software 
-  * distributed under the License is distributed on an "AS IS" BASIS, 
-  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  * See the License for the specific language governing permissions and
-  * limitations under the License.
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
   *
   ******************************************************************************
   */