Peter Drescher
mbed library with additional peripherals for ST F401 board
Fork of
mbed-src
by 
mbed official
This mbed LIB has additional peripherals for ST F401 board
- UART2 : PA_3 rx, PA_2 tx
- UART3 : PC_7 rx, PC_6 tx
- I2C2 : PB_3 SDA, PB_10 SCL
- I2C3 : PB_4 SDA, PA_8 SCL
Revision 105:e200768883d5, committed 2014-02-24
- Comitter:
- mbed_official
- Date:
- Mon Feb 24 10:30:08 2014 +0000
- Parent:
- 104:a6a92e2e5a92
- Child:
- 106:ced8cbb51063
- Commit message:
- Synchronized with git revision b4aaab2958c9c675a78f2fda39c1df94546d4862
Full URL: https://github.com/mbedmicro/mbed/commit/b4aaab2958c9c675a78f2fda39c1df94546d4862/
PinNames addition, KL05Z uARM online toolchain
Changed in this revision
--- a/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL05Z/PinNames.h Fri Feb 21 12:15:10 2014 +0000
+++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL05Z/PinNames.h Mon Feb 24 10:30:08 2014 +0000
@@ -111,10 +111,13 @@
A3 = PTA0,
A4 = PTA9,
A5 = PTB13,
-
+
I2C_SCL = D15,
I2C_SDA = D14,
+ TSI_ELEC0 = PTA13,
+ TSI_ELEC1 = PTB12,
+
// Not connected
NC = (int)0xFFFFFFFF
} PinName;
--- a/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/PinNames.h Fri Feb 21 12:15:10 2014 +0000
+++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/PinNames.h Mon Feb 24 10:30:08 2014 +0000
@@ -229,10 +229,13 @@
A3 = PTB3,
A4 = PTC2,
A5 = PTC1,
-
+
I2C_SCL = D15,
I2C_SDA = D14,
+ TSI_ELEC0 = PTB16,
+ TSI_ELEC1 = PTB17,
+
// Not connected
NC = (int)0xFFFFFFFF
} PinName;
--- a/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/PinNames.h Fri Feb 21 12:15:10 2014 +0000
+++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/PinNames.h Mon Feb 24 10:30:08 2014 +0000
@@ -199,11 +199,11 @@
LED2 = LED_RED,
LED3 = LED_GREEN,
LED4 = LED_RED,
-
+
//Push buttons
SW1 = PTC3,
SW3 = PTC12,
-
+
// USB Pins
USBTX = PTA2,
USBRX = PTA1,
@@ -232,10 +232,13 @@
A3 = PTB3,
A4 = PTC2,
A5 = PTC1,
-
+
I2C_SCL = D15,
I2C_SDA = D14,
+ TSI_ELEC0 = PTB16,
+ TSI_ELEC1 = PTB17,
+
// Not connected
NC = (int)0xFFFFFFFF
} PinName;
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/PinNames.h Fri Feb 21 12:15:10 2014 +0000
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/PinNames.h Mon Feb 24 10:30:08 2014 +0000
@@ -50,115 +50,116 @@
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
+
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
- PD_2 = 0x32,
+ PD_2 = 0x32,
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_4 = 0x54,
+ PF_5 = 0x55,
+ PF_6 = 0x56,
+ PF_7 = 0x57,
+
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/PinNames.h Fri Feb 21 12:15:10 2014 +0000
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/PinNames.h Mon Feb 24 10:30:08 2014 +0000
@@ -46,110 +46,110 @@
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
+
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
+ PD_0 = 0x30,
+ PD_1 = 0x31,
+ PD_2 = 0x32,
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/PinNames.h Fri Feb 21 12:15:10 2014 +0000
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/PinNames.h Mon Feb 24 10:30:08 2014 +0000
@@ -53,115 +53,115 @@
#define STM_MODE_EVT_RISING (9)
#define STM_MODE_EVT_FALLING (10)
#define STM_MODE_EVT_RISING_FALLING (11)
-
+
// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
+
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
- PD_2 = 0x32,
+ PD_2 = 0x32,
- PH_0 = 0x70,
- PH_1 = 0x71,
+ PH_0 = 0x70,
+ PH_1 = 0x71,
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
} PinName;
typedef enum {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/PinNames.h Fri Feb 21 12:15:10 2014 +0000
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/PinNames.h Mon Feb 24 10:30:08 2014 +0000
@@ -50,111 +50,111 @@
// Low nibble = pin number
#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
+
typedef enum {
PIN_INPUT,
PIN_OUTPUT
} PinDirection;
typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
- PD_2 = 0x32,
+ PD_2 = 0x32,
- PH_0 = 0x70,
- PH_1 = 0x71,
+ PH_0 = 0x70,
+ PH_1 = 0x71,
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
} PinName;
typedef enum {