mbed official
mbed library sources
Dependents: Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more
Superseded
This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.
Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.
If you are looking for a stable and tested release, please import one of the official mbed library releases:
Import librarymbed
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Last commit 20 Feb 2019 by 
mbed official
Diff: targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_rcc.c
- Revision:
- 630:825f75ca301e
- Parent:
- 441:d2c15dda23c1
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_rcc.c Mon Sep 28 10:30:09 2015 +0100
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_rcc.c Mon Sep 28 10:45:10 2015 +0100
@@ -2,21 +2,21 @@
******************************************************************************
* @file stm32f0xx_hal_rcc.c
* @author MCD Application Team
- * @version V1.2.0
- * @date 11-December-2014
+ * @version V1.3.0
+ * @date 26-June-2015
* @brief RCC HAL module driver.
- * This file provides firmware functions to manage the following
+ * This file provides firmware functions to manage the following
* functionalities of the Reset and Clock Control (RCC) peripheral:
* + Initialization and de-initialization functions
* + Peripheral Control functions
- *
- @verbatim
+ *
+ @verbatim
==============================================================================
##### RCC specific features #####
==============================================================================
- [..]
+ [..]
After reset the device is running from Internal High Speed oscillator
- (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is disabled,
+ (HSI 8MHz) with Flash 0 wait state, Flash prefetch buffer is enabled,
and all peripherals are off except internal SRAM, Flash and JTAG.
(+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
all peripherals mapped on these busses are running at HSI speed.
@@ -26,10 +26,10 @@
[..] Once the device started from reset, the user application has to:
(+) Configure the clock source to be used to drive the System clock
(if the application needs higher frequency/performance)
- (+) Configure the System clock frequency and Flash settings
+ (+) Configure the System clock frequency and Flash settings
(+) Configure the AHB and APB busses prescalers
(+) Enable the clock for the peripheral(s) to be used
- (+) Configure the clock source(s) for peripherals which clocks are not
+ (+) Configure the clock source(s) for peripherals whose clocks are not
derived from the System clock (RTC, ADC, I2C, USART, TIM, USB FS, etc..)
##### RCC Limitations #####
@@ -37,25 +37,20 @@
[..]
A delay between an RCC peripheral clock enable and the effective peripheral
enabling should be taken into account in order to manage the peripheral read/write
- from/to registeres.
+ from/to registers.
(+) This delay depends on the peripheral mapping.
- (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
- after the clock enable bit is set on the hardware register
- (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
- after the clock enable bit is set on the hardware register
+ (++) AHB & APB peripherals, 1 dummy read is necessary
[..]
- Possible Workarounds:
- (#) Enable the peripheral clock sometimes before the peripheral read/write
- register is required.
- (#) For AHB peripheral, insert two dummy read to the peripheral register.
- (#) For APB peripheral, insert a dummy read to the peripheral register.
-
-@endverbatim
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each __HAL_RCC_PPP_CLK_ENABLE() macro.
+
+ @endverbatim
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -79,8 +74,8 @@
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- ******************************************************************************
- */
+ ******************************************************************************
+*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal.h"
@@ -89,8 +84,8 @@
* @{
*/
-/** @defgroup RCC RCC HAL module driver
- * @brief RCC HAL module driver
+/** @defgroup RCC RCC
+* @brief RCC HAL module driver
* @{
*/
@@ -98,22 +93,21 @@
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
-/** @defgroup RCC_Private_Define RCC Private Define
- * @{
- */
-#define RCC_CFGR_HPRE_BITNUMBER 4
-#define RCC_CFGR_PPRE_BITNUMBER 8
+/** @defgroup RCC_Private_Constants RCC Private Constants
+ * @{
+ */
/**
* @}
*/
-
/* Private macro -------------------------------------------------------------*/
/** @defgroup RCC_Private_Macros RCC Private Macros
* @{
*/
-#define __MCO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
-#define MCO_GPIO_PORT GPIOA
-#define MCO_PIN GPIO_PIN_8
+
+#define MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
+#define MCO1_GPIO_PORT GPIOA
+#define MCO1_PIN GPIO_PIN_8
+
/**
* @}
*/
@@ -122,96 +116,95 @@
/** @defgroup RCC_Private_Variables RCC Private Variables
* @{
*/
-const uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t aAPBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
-/* Exported functions ---------------------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
/** @defgroup RCC_Exported_Functions RCC Exported Functions
* @{
*/
-/** @defgroup RCC_Exported_Functions_Group1 Initialization/de-initialization function
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
+/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ===============================================================================
##### Initialization and de-initialization function #####
- ===============================================================================
+ ===============================================================================
[..]
- This section provide functions allowing to configure the internal/external oscillators
+ This section provides functions allowing to configure the internal/external oscillators
(HSE, HSI, HSI14, HSI48, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK,
AHB and APB1).
[..] Internal/external clock and PLL configuration
- (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through
- the PLL as System clock source.
+ (#) HSI (high-speed internal), 8 MHz factory-trimmed RC used directly or through
+ the PLL as System clock source.
The HSI clock can be used also to clock the USART and I2C peripherals.
- (#) HSI14 (high-speed internal), 14 MHz factory-trimmed RC used directly to clock
+ (#) HSI14 (high-speed internal), 14 MHz factory-trimmed RC used directly to clock
the ADC peripheral.
- (#) LSI (low-speed internal), 40 KHz low consumption RC used as IWDG and/or RTC
- clock source.
+ (#) LSI (low-speed internal), ~40 KHz low consumption RC used as IWDG and/or RTC
+ clock source.
- (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or
- through the PLL as System clock source. Can be used also as RTC clock source.
+ (#) HSE (high-speed external), 4 to 32 MHz crystal oscillator used directly or
+ through the PLL as System clock source. Can be used also as RTC clock source.
- (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
+ (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
- (#) PLL (clocked by HSI, HSI48 or HSE), featuring different output clocks:
- (++) The first output is used to generate the high speed system clock (up to 48 MHz)
- (++) The second output is used to generate the clock for the USB FS (48 MHz)
- (++) The third output may be used to generate the clock for the TIM, I2C and USART
- peripherals (up to 48 MHz)
+ (#) PLL (clocked by HSI, HSI48 or HSE), featuring different output clocks:
+ (++) The first output is used to generate the high speed system clock (up to 48 MHz)
+ (++) The second output is used to generate the clock for the USB FS (48 MHz)
+ (++) The third output may be used to generate the clock for the TIM, I2C and USART
+ peripherals (up to 48 MHz)
- (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
- and if a HSE clock failure occurs(HSE used directly or through PLL as System
- clock source), the System clockis automatically switched to HSI and an interrupt
- is generated if enabled. The interrupt is linked to the Cortex-M0 NMI
- (Non-Maskable Interrupt) exception vector.
+ (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
+ and if a HSE clock failure occurs(HSE used directly or through PLL as System
+ clock source), the System clockis automatically switched to HSI and an interrupt
+ is generated if enabled. The interrupt is linked to the Cortex-M0 NMI
+ (Non-Maskable Interrupt) exception vector.
- (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSE, LSI, LSE or PLL
- clock (divided by 2) output on pin (such as PA8 pin).
+ (#) MCO (microcontroller clock output), used to output SYSCLK, HSI, HSE, LSI, LSE or PLL
+ clock (divided by 2) output on pin (such as PA8 pin).
- [..] System, AHB and APB busses clocks configuration
- (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
- HSE and PLL.
- The AHB clock (HCLK) is derived from System clock through configurable
- prescaler and used to clock the CPU, memory and peripherals mapped
- on AHB bus (DMA, GPIO...). APB1 (PCLK1) clock is derived
- from AHB clock through configurable prescalers and used to clock
- the peripherals mapped on these busses. You can use
- "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
+ [..] System, AHB and APB busses clocks configuration
+ (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
+ HSE and PLL.
+ The AHB clock (HCLK) is derived from System clock through configurable
+ prescaler and used to clock the CPU, memory and peripherals mapped
+ on AHB bus (DMA, GPIO...). APB1 (PCLK1) clock is derived
+ from AHB clock through configurable prescalers and used to clock
+ the peripherals mapped on these busses. You can use
+ "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
- (#) All the peripheral clocks are derived from the System clock (SYSCLK) except:
- (++) The FLASH program/erase clock which is always HSI 8MHz clock.
- (++) The USB 48 MHz clock which is derived from the PLL VCO clock.
- (++) The USART clock which can be derived as well from HSI 8MHz, LSI or LSE.
- (++) The I2C clock which can be derived as well from HSI 8MHz clock.
- (++) The ADC clock which is derived from PLL output.
- (++) The RTC clock which is derived from the LSE, LSI or 1 MHz HSE_RTC
- (HSE divided by a programmable prescaler). The System clock (SYSCLK)
- frequency must be higher or equal to the RTC clock frequency.
- (++) IWDG clock which is always the LSI clock.
+ (#) All the peripheral clocks are derived from the System clock (SYSCLK) except:
+ (++) The FLASH program/erase clock which is always HSI 8MHz clock.
+ (++) The USB 48 MHz clock which is derived from the PLL VCO clock.
+ (++) The USART clock which can be derived as well from HSI 8MHz, LSI or LSE.
+ (++) The I2C clock which can be derived as well from HSI 8MHz clock.
+ (++) The ADC clock which is derived from PLL output.
+ (++) The RTC clock which is derived from the LSE, LSI or 1 MHz HSE_RTC
+ (HSE divided by a programmable prescaler). The System clock (SYSCLK)
+ frequency must be higher or equal to the RTC clock frequency.
+ (++) IWDG clock which is always the LSI clock.
- (#) For the STM32F0xx devices, the maximum frequency of the SYSCLK, HCLK and PCLK1 is 48 MHz,
- Depending on the SYSCLK frequency, the flash latency should be adapted accordingly:
- +-----------------------------------------------+
- | Latency | SYSCLK clock frequency (MHz) |
- |---------------|-------------------------------|
- |0WS(1CPU cycle)| 0 < SYSCLK <= 24 |
- |---------------|-------------------------------|
- |1WS(2CPU cycle)| 24 < SYSCLK <= 48 |
- +-----------------------------------------------+
+ (#) For the STM32F0xx devices, the maximum frequency of the SYSCLK, HCLK and PCLK1 is 48 MHz,
+ Depending on the SYSCLK frequency, the flash latency should be adapted accordingly:
+ +-----------------------------------------------+
+ | Latency | SYSCLK clock frequency (MHz) |
+ |---------------|-------------------------------|
+ |0WS(1CPU cycle)| 0 < SYSCLK <= 24 |
+ |---------------|-------------------------------|
+ |1WS(2CPU cycle)| 24 < SYSCLK <= 48 |
+ +-----------------------------------------------+
- (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and
- prefetch is disabled.
-
-@endverbatim
+ (#) After reset, the System clock source is the HSI (8 MHz) with 0 WS and
+ prefetch is disabled.
+ @endverbatim
* @{
*/
@@ -221,11 +214,11 @@
* - HSI ON and used as system clock source
* - HSE and PLL OFF
* - AHB, APB1 prescaler set to 1.
- * - CSS, MCO OFF
+ * - CSS and MCO1 OFF
* - All interrupts disabled
* @note This function doesn't modify the configuration of the
- * - Peripheral clocks
- * - LSI, LSE and RTC clocks
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
* @retval None
*/
void HAL_RCC_DeInit(void)
@@ -252,7 +245,7 @@
CLEAR_REG(RCC->CFGR3);
/* Disable all interrupts */
- CLEAR_REG(RCC->CIR);
+ CLEAR_REG(RCC->CIR);
}
/**
@@ -263,26 +256,461 @@
* @note The PLL is not disabled when used as system clock.
* @retval HAL status
*/
-__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
{
- /* Note : This function is defined into this file for library reference. */
- /* Function content is located into file stm32f0xx_hal_rcc_ex.c to */
- /* handle the possible oscillators present in STM32F0xx devices */
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(RCC_OscInitStruct != NULL);
+ assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
- /* Return error status as not implemented here */
- return HAL_ERROR;
+ /*------------------------------- HSE Configuration ------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
+
+ /* When the HSE is used as system clock or clock source for PLL in these cases it is not allowed to be disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSE)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Reset HSEON and HSEBYP bits before configuring the HSE --------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the new HSE configuration ---------------------------------------*/
+ __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
+
+ /* Check the HSE State */
+ if(RCC_OscInitStruct->HSEState != RCC_HSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSE is bypassed or disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*----------------------------- HSI Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
+
+ /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI)
+ || ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI)))
+ {
+ /* When HSI is used as system clock it will not disabled */
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
+ {
+ return HAL_ERROR;
+ }
+ /* Otherwise, just the calibration is allowed */
+ else
+ {
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if(RCC_OscInitStruct->HSIState != RCC_HSI_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
+ __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /*------------------------------ LSI Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
+
+ /* Check the LSI State */
+ if(RCC_OscInitStruct->LSIState != RCC_LSI_OFF)
+ {
+ /* Enable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal Low Speed oscillator (LSI). */
+ __HAL_RCC_LSI_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSI is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ /*------------------------------ LSE Configuration -------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
+
+ /* Enable Power Clock*/
+ __HAL_RCC_PWR_CLK_ENABLE();
+
+ /* Enable write access to Backup domain */
+ SET_BIT(PWR->CR, PWR_CR_DBP);
+
+ /* Wait for Backup domain Write protection disable */
+ tickstart = HAL_GetTick();
+
+ while((PWR->CR & PWR_CR_DBP) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Set the new LSE configuration -----------------------------------------*/
+ __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
+ /* Check the LSE State */
+ if(RCC_OscInitStruct->LSEState != RCC_LSE_OFF)
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till LSE is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+ /*----------------------------- HSI14 Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI14(RCC_OscInitStruct->HSI14State));
+ assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSI14CalibrationValue));
+
+ /* Check the HSI14 State */
+ if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ON)
+ {
+ /* Disable ADC control of the Internal High Speed oscillator HSI14 */
+ __HAL_RCC_HSI14ADC_DISABLE();
+
+ /* Enable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI14_ENABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */
+ __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue);
+ }
+ else if(RCC_OscInitStruct->HSI14State == RCC_HSI14_ADC_CONTROL)
+ {
+ /* Enable ADC control of the Internal High Speed oscillator HSI14 */
+ __HAL_RCC_HSI14ADC_ENABLE();
+
+ /* Adjusts the Internal High Speed oscillator 14Mhz (HSI14) calibration value. */
+ __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSI14CalibrationValue);
+ }
+ else
+ {
+ /* Disable ADC control of the Internal High Speed oscillator HSI14 */
+ __HAL_RCC_HSI14ADC_DISABLE();
+
+ /* Disable the Internal High Speed oscillator (HSI). */
+ __HAL_RCC_HSI14_DISABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI14RDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI14_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+#if defined(RCC_CR2_HSI48ON)
+ /*----------------------------- HSI48 Configuration --------------------------*/
+ if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_HSI48(RCC_OscInitStruct->HSI48State));
+
+ /* When the HSI48 is used as system clock it is not allowed to be disabled */
+ if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_HSI48) ||
+ ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_SYSCLKSOURCE_STATUS_PLLCLK) && (__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI48)))
+ {
+ if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET) && (RCC_OscInitStruct->HSI48State != RCC_HSI48_ON))
+ {
+ return HAL_ERROR;
+ }
+ }
+ else
+ {
+ /* Check the HSI State */
+ if(RCC_OscInitStruct->HSI48State != RCC_HSI48_OFF)
+ {
+ /* Enable the Internal High Speed oscillator (HSI48). */
+ __HAL_RCC_HSI48_ENABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the Internal High Speed oscillator (HSI48). */
+ __HAL_RCC_HSI48_DISABLE();
+
+ /* Get timeout */
+ tickstart = HAL_GetTick();
+
+ /* Wait till HSI is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart) > HSI48_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+#endif /* RCC_CR2_HSI48ON */
+
+ /*-------------------------------- PLL Configuration -----------------------*/
+ /* Check the parameters */
+ assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
+ if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
+ {
+ /* Check if the PLL is used as system clock or not */
+ if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
+ {
+ /* Check the parameters */
+ assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
+ assert_param(IS_RCC_PLL_MUL(RCC_OscInitStruct->PLL.PLLMUL));
+ assert_param(IS_RCC_PREDIV(RCC_OscInitStruct->PLL.PREDIV));
+
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+
+ /* Configure the main PLL clock source, predivider and multiplication factor. */
+ __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
+ RCC_OscInitStruct->PLL.PREDIV,
+ RCC_OscInitStruct->PLL.PLLMUL);
+ /* Enable the main PLL. */
+ __HAL_RCC_PLL_ENABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is ready */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else
+ {
+ /* Disable the main PLL. */
+ __HAL_RCC_PLL_DISABLE();
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ /* Wait till PLL is disabled */
+ while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
+ {
+ if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ else
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ return HAL_OK;
}
/**
- * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
+ * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
* parameters in the RCC_ClkInitStruct.
* @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that
* contains the configuration information for the RCC peripheral.
- * @param FLatency: FLASH Latency
+ * @param FLatency: FLASH Latency
* This parameter can be one of the following values:
* @arg FLASH_LATENCY_0: FLASH 0 Latency cycle
* @arg FLASH_LATENCY_1: FLASH 1 Latency cycle
- *
* @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
* and updated by HAL_RCC_GetHCLKFreq() function called within this function
*
@@ -290,82 +718,327 @@
* startup from Reset, wake-up from STOP and STANDBY mode, or in case
* of failure of the HSE used directly or indirectly as system clock
* (if the Clock Security System CSS is enabled).
- *
+ *
* @note A switch from one clock source to another occurs only if the target
- * clock source is ready (clock stable after startup delay or PLL locked).
+ * clock source is ready (clock stable after startup delay or PLL locked).
* If a clock source which is not yet ready is selected, the switch will
- * occur when the clock source will be ready.
+ * occur when the clock source will be ready.
+ * You can use HAL_RCC_GetClockConfig() function to know which clock is
+ * currently used as system clock source.
* @retval HAL status
*/
-__weak HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
{
- /* Note : This function is defined into this file for library reference. */
- /* Function content is located into file stm32f0xx_hal_rcc_ex.c to */
- /* handle the possible oscillators present in STM32F0xx devices */
+ uint32_t tickstart = 0;
+
+ /* Check the parameters */
+ assert_param(RCC_ClkInitStruct != NULL);
+ assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
+ assert_param(IS_FLASH_LATENCY(FLatency));
+
+ /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
+ must be correctly programmed according to the frequency of the CPU clock
+ (HCLK) of the device. */
- /* Return error status as not implemented here */
- return HAL_ERROR;
+ /* Increasing the CPU frequency */
+ if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
+ {
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+#if defined(RCC_CR2_HSI48ON)
+ /* HSI48 is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+ {
+ /* Check the HSI48 ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+#endif /* RCC_CR2_HSI48ON */
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+#if defined(RCC_CR2_HSI48ON)
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI48)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+#endif /* RCC_CR2_HSI48ON */
+ else
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+ }
+ /* Decreasing the CPU frequency */
+ else
+ {
+ /*-------------------------- HCLK Configuration --------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
+ {
+ assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
+ }
+
+ /*------------------------- SYSCLK Configuration -------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
+ {
+ assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
+
+ /* HSE is selected as System Clock Source */
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ /* Check the HSE ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ /* PLL is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ /* Check the PLL ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+#if defined(RCC_CR2_HSI48ON)
+ /* HSI48 is selected as System Clock Source */
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+ {
+ /* Check the HSI48 ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSI48RDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+#endif /* RCC_CR2_HSI48ON */
+ /* HSI is selected as System Clock Source */
+ else
+ {
+ /* Check the HSI ready flag */
+ if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
+ {
+ return HAL_ERROR;
+ }
+ }
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, RCC_ClkInitStruct->SYSCLKSource);
+
+ /* Get Start Tick*/
+ tickstart = HAL_GetTick();
+
+ if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+#if defined(RCC_CR2_HSI48ON)
+ else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSI48)
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI48)
+ {
+ if((HAL_GetTick() - tickstart) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+#endif /* RCC_CR2_HSI48ON */
+ else
+ {
+ while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
+ {
+ if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+ }
+
+ /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
+ __HAL_FLASH_SET_LATENCY(FLatency);
+
+ /* Check that the new number of wait states is taken into account to access the Flash
+ memory by reading the FLASH_ACR register */
+ if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
+ {
+ return HAL_ERROR;
+ }
+ }
+
+ /*-------------------------- PCLK1 Configuration ---------------------------*/
+ if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
+ {
+ assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE, RCC_ClkInitStruct->APB1CLKDivider);
+ }
+
+ /* Configure the source of time base considering new system clocks settings*/
+ HAL_InitTick (TICK_INT_PRIORITY);
+
+ return HAL_OK;
}
/**
* @}
*/
-/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control function
- * @brief RCC clocks control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control function #####
- ===============================================================================
+/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief RCC clocks control functions
+ *
+ @verbatim
+ ===============================================================================
+ ##### Peripheral Control functions #####
+ ===============================================================================
[..]
- This subsection provides a set of functions allowing to control the RCC Clocks
+ This subsection provides a set of functions allowing to control the RCC Clocks
frequencies.
-@endverbatim
+ @endverbatim
* @{
*/
/**
- * @brief Selects the clock source to output on MCO pin(such as PA8).
- * @note MCO pin (such as PA8) should be configured in alternate function mode.
+ * @brief Selects the clock source to output on MCO pin.
+ * @note MCO pin should be configured in alternate function mode.
* @param RCC_MCOx: specifies the output direction for the clock source.
* This parameter can be one of the following values:
- * @arg RCC_MCO: Clock source to output on MCO pin(such as PA8).
+ * @arg RCC_MCO: Clock source to output on MCO1 pin(PA8).
* @param RCC_MCOSource: specifies the clock source to output.
* This parameter can be one of the following values:
- * @arg RCC_MCOSOURCE_LSI: LSI clock selected as MCO source
- * @arg RCC_MCOSOURCE_HSI: HSI clock selected as MCO source
- * @arg RCC_MCOSOURCE_LSE: LSE clock selected as MCO source
- * @arg RCC_MCOSOURCE_HSE: HSE clock selected as MCO source
- * @arg RCC_MCOSOURCE_PLLCLK_NODIV: main PLL clock not divided selected as MCO source (not applicable to STM32F05x devices)
- * @arg RCC_MCOSOURCE_PLLCLK_DIV2: main PLL clock divided by 2 selected as MCO source
- * @arg RCC_MCOSOURCE_SYSCLK: System clock (SYSCLK) selected as MCO source
- * @param RCC_MCODiv: specifies the MCOx prescaler.
+ * @arg RCC_MCOSOURCE_HSI: HSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSE: HSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSI: LSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSE: LSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_NODIV: PLLCLK selected as MCO clock (not applicable to STM32F05x devices)
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: PLLCLK Divided by 2 selected as MCO clock
+ * @arg RCC_MCOSOURCE_SYSCLK: System Clock selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI14: HSI14 selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI48: HSI48 selected as MCO clock
+ * @param RCC_MCODiv: specifies the MCO DIV.
* This parameter can be one of the following values:
- * @arg RCC_MCO_NODIV: no division applied to MCO clock
+ * @arg RCC_MCODIV_1: no division applied to MCO clock
* @retval None
*/
void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
{
GPIO_InitTypeDef gpio;
+
/* Check the parameters */
assert_param(IS_RCC_MCO(RCC_MCOx));
assert_param(IS_RCC_MCODIV(RCC_MCODiv));
- /* RCC_MCO */
- assert_param(IS_RCC_MCOSOURCE(RCC_MCOSource));
-
+ assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
+
/* MCO Clock Enable */
- __MCO_CLK_ENABLE();
-
- /* Configue the MCO pin in alternate function mode */
- gpio.Pin = MCO_PIN;
+ MCO1_CLK_ENABLE();
+
+ /* Configure the MCO1 pin in alternate function mode */
+ gpio.Pin = MCO1_PIN;
gpio.Mode = GPIO_MODE_AF_PP;
gpio.Speed = GPIO_SPEED_HIGH;
gpio.Pull = GPIO_NOPULL;
gpio.Alternate = GPIO_AF0_MCO;
- HAL_GPIO_Init(MCO_GPIO_PORT, &gpio);
-
+ HAL_GPIO_Init(MCO1_GPIO_PORT, &gpio);
+
/* Configure the MCO clock source */
__HAL_RCC_MCO_CONFIG(RCC_MCOSource, RCC_MCODiv);
}
@@ -375,13 +1048,13 @@
* @note If a failure is detected on the HSE oscillator clock, this oscillator
* is automatically disabled and an interrupt is generated to inform the
* software about the failure (Clock Security System Interrupt, CSSI),
- * allowing the MCU to perform rescue operations. The CSSI is linked to
- * the Cortex-M0 NMI (Non-Maskable Interrupt) exception vector.
+ * allowing the MCU to perform rescue operations. The CSSI is linked to
+ * the Cortex-M0 NMI (Non-Maskable Interrupt) exception vector.
* @retval None
*/
void HAL_RCC_EnableCSS(void)
{
- SET_BIT(RCC->CR, RCC_CR_CSSON);
+ SET_BIT(RCC->CR, RCC_CR_CSSON) ;
}
/**
@@ -390,68 +1063,125 @@
*/
void HAL_RCC_DisableCSS(void)
{
- CLEAR_BIT(RCC->CR, RCC_CR_CSSON);
+ CLEAR_BIT(RCC->CR, RCC_CR_CSSON) ;
}
/**
- * @brief Returns the SYSCLK frequency
- * @note The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
+ * @brief Returns the SYSCLK frequency
+ *
+ * @note The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
* constant and the selected clock source:
- * @note If SYSCLK source is HSI, function returns a value based on HSI_VALUE(*)
- * @note If SYSCLK source is HSI48, function returns a value based on HSI48_VALUE(*)
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
* @note If SYSCLK source is HSE, function returns a value based on HSE_VALUE
* divided by PREDIV factor(**)
* @note If SYSCLK source is PLL, function returns a value based on HSE_VALUE
* divided by PREDIV factor(**) or depending on STM32F0xx devices either a value based
* on HSI_VALUE divided by 2 or HSI_VALUE divided by PREDIV factor(*) multiplied by the
* PLL factor .
- * @note (*) HSI_VALUE & HSI48_VALUE are constants defined in stm32f0xx_hal_conf.h file
- * (default values 8 MHz and 48MHz).
+ * @note (*) HSI_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
+ * 8 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
* @note (**) HSE_VALUE is a constant defined in stm32f0xx_hal_conf.h file (default value
* 8 MHz), user has to ensure that HSE_VALUE is same as the real
* frequency of the crystal used. Otherwise, this function may
* have wrong result.
- *
+ *
* @note The result of this function could be not correct when using fractional
* value for HSE crystal.
- *
- * @note This function can be used by the user application to compute the
+ *
+ * @note This function can be used by the user application to compute the
* baudrate for the communication peripherals or configure other parameters.
- *
+ *
* @note Each time SYSCLK changes, this function must be called to update the
* right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
- *
+ *
+ *
* @retval SYSCLK frequency
*/
-__weak uint32_t HAL_RCC_GetSysClockFreq(void)
+uint32_t HAL_RCC_GetSysClockFreq(void)
{
- /* Note : This function is defined into this file for library reference. */
- /* Function content is located into file stm32f0xx_hal_rcc_ex.c to */
- /* handle the possible oscillators present in STM32F0xx devices */
+ const uint8_t aPLLMULFactorTable[16] = { 2, 3, 4, 5, 6, 7, 8, 9,
+ 10, 11, 12, 13, 14, 15, 16, 16};
+ const uint8_t aPredivFactorTable[16] = { 1, 2, 3, 4, 5, 6, 7, 8,
+ 9,10, 11, 12, 13, 14, 15, 16};
+
+ uint32_t tmpreg = 0, prediv = 0, pllclk = 0, pllmul = 0;
+ uint32_t sysclockfreq = 0;
+
+ tmpreg = RCC->CFGR;
- /* Return error status as not implemented here */
- return HAL_ERROR;
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (tmpreg & RCC_CFGR_SWS)
+ {
+ case RCC_SYSCLKSOURCE_STATUS_HSE: /* HSE used as system clock */
+ {
+ sysclockfreq = HSE_VALUE;
+ break;
+ }
+ case RCC_SYSCLKSOURCE_STATUS_PLLCLK: /* PLL used as system clock */
+ {
+ pllmul = aPLLMULFactorTable[(uint32_t)(tmpreg & RCC_CFGR_PLLMUL) >> RCC_CFGR_PLLMUL_BITNUMBER];
+ prediv = aPredivFactorTable[(uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV) >> RCC_CFGR2_PREDIV_BITNUMBER];
+ if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
+ {
+ /* HSE used as PLL clock source : PLLCLK = HSE/PREDIV * PLLMUL */
+ pllclk = (HSE_VALUE/prediv) * pllmul;
+ }
+#if defined(RCC_CR2_HSI48ON)
+ else if ((tmpreg & RCC_CFGR_PLLSRC) == RCC_PLLSOURCE_HSI48)
+ {
+ /* HSI48 used as PLL clock source : PLLCLK = HSI48/PREDIV * PLLMUL */
+ pllclk = (HSI48_VALUE/prediv) * pllmul;
+ }
+#endif /* RCC_CR2_HSI48ON */
+ else
+ {
+#if (defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC))
+ /* HSI used as PLL clock source : PLLCLK = HSI/PREDIV * PLLMUL */
+ pllclk = (HSI_VALUE/prediv) * pllmul;
+#else
+ /* HSI used as PLL clock source : PLLCLK = HSI/2 * PLLMUL */
+ pllclk = (uint32_t)((HSI_VALUE >> 1) * pllmul);
+#endif
+ }
+ sysclockfreq = pllclk;
+ break;
+ }
+#if defined(RCC_CR2_HSI48ON)
+ case RCC_SYSCLKSOURCE_STATUS_HSI48: /* HSI48 used as system clock source */
+ {
+ sysclockfreq = HSI48_VALUE;
+ break;
+ }
+#endif /* RCC_CR2_HSI48ON */
+ case RCC_SYSCLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ default: /* HSI used as system clock */
+ {
+ sysclockfreq = HSI_VALUE;
+ break;
+ }
+ }
+ return sysclockfreq;
}
/**
- * @brief Returns the HCLK frequency
+ * @brief Returns the HCLK frequency
* @note Each time HCLK changes, this function must be called to update the
* right HCLK value. Otherwise, any configuration based on this function will be incorrect.
*
* @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
* and updated within this function
- *
* @retval HCLK frequency
*/
uint32_t HAL_RCC_GetHCLKFreq(void)
{
- SystemCoreClock = HAL_RCC_GetSysClockFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER];
+ SystemCoreClock = HAL_RCC_GetSysClockFreq() >> aAPBAHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> RCC_CFGR_HPRE_BITNUMBER];
return SystemCoreClock;
}
/**
- * @brief Returns the PCLK1 frequency
+ * @brief Returns the PCLK1 frequency
* @note Each time PCLK1 changes, this function must be called to update the
* right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
* @retval PCLK1 frequency
@@ -459,27 +1189,34 @@
uint32_t HAL_RCC_GetPCLK1Freq(void)
{
/* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
- return (HAL_RCC_GetHCLKFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE)>> RCC_CFGR_PPRE_BITNUMBER]);
-}
+ return (HAL_RCC_GetHCLKFreq() >> aAPBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE)>> RCC_CFGR_PPRE_BITNUMBER]);
+}
/**
- * @brief Configures the RCC_OscInitStruct according to the internal
+ * @brief Configures the RCC_OscInitStruct according to the internal
* RCC configuration registers.
- * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
+ * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
* will be configured.
* @retval None
*/
void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
{
- /* Set all possible values for the Oscillator type parameter ---------------*/
- RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
+ /* Check the parameters */
+ assert_param(RCC_OscInitStruct != NULL);
+ /* Set all possible values for the Oscillator type parameter ---------------*/
+ RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI \
+ | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI | RCC_OSCILLATORTYPE_HSI14;
+#if defined(RCC_CR2_HSI48ON)
+ RCC_OscInitStruct->OscillatorType |= RCC_OSCILLATORTYPE_HSI48;
+#endif /* RCC_CR2_HSI48ON */
+
/* Get the HSE configuration -----------------------------------------------*/
- if((RCC->CR & RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
+ if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
{
RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
}
- else if((RCC->CR & RCC_CR_HSEON) == RCC_CR_HSEON)
+ else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
{
RCC_OscInitStruct->HSEState = RCC_HSE_ON;
}
@@ -487,9 +1224,9 @@
{
RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
}
-
+
/* Get the HSI configuration -----------------------------------------------*/
- if((RCC->CR & RCC_CR_HSION) == RCC_CR_HSION)
+ if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
{
RCC_OscInitStruct->HSIState = RCC_HSI_ON;
}
@@ -497,15 +1234,15 @@
{
RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
}
-
+
RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> RCC_CR_HSITRIM_BitNumber);
-
+
/* Get the LSE configuration -----------------------------------------------*/
- if((RCC->BDCR & RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
+ if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
{
RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
}
- else if((RCC->BDCR & RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
+ else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
{
RCC_OscInitStruct->LSEState = RCC_LSE_ON;
}
@@ -513,9 +1250,9 @@
{
RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
}
-
+
/* Get the LSI configuration -----------------------------------------------*/
- if((RCC->CSR & RCC_CSR_LSION) == RCC_CSR_LSION)
+ if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
{
RCC_OscInitStruct->LSIState = RCC_LSI_ON;
}
@@ -523,9 +1260,9 @@
{
RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
}
-
+
/* Get the PLL configuration -----------------------------------------------*/
- if((RCC->CR & RCC_CR_PLLON) == RCC_CR_PLLON)
+ if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
{
RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
}
@@ -536,7 +1273,7 @@
RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLSRC);
RCC_OscInitStruct->PLL.PLLMUL = (uint32_t)(RCC->CFGR & RCC_CFGR_PLLMUL);
RCC_OscInitStruct->PLL.PREDIV = (uint32_t)(RCC->CFGR2 & RCC_CFGR2_PREDIV);
-
+
/* Get the HSI14 configuration -----------------------------------------------*/
if((RCC->CR2 & RCC_CR2_HSI14ON) == RCC_CR2_HSI14ON)
{
@@ -548,35 +1285,40 @@
}
RCC_OscInitStruct->HSI14CalibrationValue = (uint32_t)((RCC->CR2 & RCC_CR2_HSI14TRIM) >> RCC_CR2_HSI14TRIM_BitNumber);
-
+
+#if defined(RCC_CR2_HSI48ON)
/* Get the HSI48 configuration if any-----------------------------------------*/
RCC_OscInitStruct->HSI48State = __HAL_RCC_GET_HSI48_STATE();
+#endif /* RCC_CR2_HSI48ON */
}
/**
- * @brief Get the RCC_ClkInitStruct according to the internal
+ * @brief Get the RCC_ClkInitStruct according to the internal
* RCC configuration registers.
- * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that
+ * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that
* contains the current clock configuration.
* @param pFLatency: Pointer on the Flash Latency.
* @retval None
*/
void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
{
+ /* Check the parameters */
+ assert_param(RCC_ClkInitStruct != NULL);
+ assert_param(pFLatency != NULL);
+
/* Set all possible values for the Clock type parameter --------------------*/
RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1;
-
- /* Get the SYSCLK configuration --------------------------------------------*/
+
+ /* Get the SYSCLK configuration --------------------------------------------*/
RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
-
- /* Get the HCLK configuration ----------------------------------------------*/
- RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
-
- /* Get the APB1 configuration ----------------------------------------------*/
- RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE);
-
- /* Get the Flash Wait State (Latency) configuration ------------------------*/
- *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
+
+ /* Get the HCLK configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
+
+ /* Get the APB1 configuration ----------------------------------------------*/
+ RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE);
+ /* Get the Flash Wait State (Latency) configuration ------------------------*/
+ *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
}
/**
@@ -590,8 +1332,8 @@
if(__HAL_RCC_GET_IT(RCC_IT_CSS))
{
/* RCC Clock Security System interrupt user callback */
- HAL_RCC_CCSCallback();
-
+ HAL_RCC_CSSCallback();
+
/* Clear RCC CSS pending bit */
__HAL_RCC_CLEAR_IT(RCC_IT_CSS);
}
@@ -601,11 +1343,11 @@
* @brief RCC Clock Security System interrupt callback
* @retval none
*/
-__weak void HAL_RCC_CCSCallback(void)
+__weak void HAL_RCC_CSSCallback(void)
{
/* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RCC_CCSCallback could be implemented in the user file
- */
+ the HAL_RCC_CSSCallback could be implemented in the user file
+ */
}
/**
