Diff: TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/MK64F12/MK64F12_pit.h

Revision:

89:552587b429a1

Parent:

82:6473597d706e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/MK64F12/MK64F12_pit.h	Fri Sep 12 16:41:52 2014 +0100
@@ -0,0 +1,517 @@
+/*
+ * Copyright (c) 2014, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
+ * OF SUCH DAMAGE.
+ */
+/*
+ * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
+ *
+ * This file was generated automatically and any changes may be lost.
+ */
+#ifndef __HW_PIT_REGISTERS_H__
+#define __HW_PIT_REGISTERS_H__
+
+#include "regs.h"
+
+/*
+ * MK64F12 PIT
+ *
+ * Periodic Interrupt Timer
+ *
+ * Registers defined in this header file:
+ * - HW_PIT_MCR - PIT Module Control Register
+ * - HW_PIT_LDVALn - Timer Load Value Register
+ * - HW_PIT_CVALn - Current Timer Value Register
+ * - HW_PIT_TCTRLn - Timer Control Register
+ * - HW_PIT_TFLGn - Timer Flag Register
+ *
+ * - hw_pit_t - Struct containing all module registers.
+ */
+
+//! @name Module base addresses
+//@{
+#ifndef REGS_PIT_BASE
+#define HW_PIT_INSTANCE_COUNT (1U) //!< Number of instances of the PIT module.
+#define REGS_PIT_BASE (0x40037000U) //!< Base address for PIT.
+#endif
+//@}
+
+//-------------------------------------------------------------------------------------------
+// HW_PIT_MCR - PIT Module Control Register
+//-------------------------------------------------------------------------------------------
+
+#ifndef __LANGUAGE_ASM__
+/*!
+ * @brief HW_PIT_MCR - PIT Module Control Register (RW)
+ *
+ * Reset value: 0x00000006U
+ *
+ * This register enables or disables the PIT timer clocks and controls the
+ * timers when the PIT enters the Debug mode.
+ */
+typedef union _hw_pit_mcr
+{
+    uint32_t U;
+    struct _hw_pit_mcr_bitfields
+    {
+        uint32_t FRZ : 1;              //!< [0] Freeze
+        uint32_t MDIS : 1;             //!< [1] Module Disable - (PIT section)
+        uint32_t RESERVED0 : 30;       //!< [31:2]
+    } B;
+} hw_pit_mcr_t;
+#endif
+
+/*!
+ * @name Constants and macros for entire PIT_MCR register
+ */
+//@{
+#define HW_PIT_MCR_ADDR          (REGS_PIT_BASE + 0x0U)
+
+#ifndef __LANGUAGE_ASM__
+#define HW_PIT_MCR               (*(__IO hw_pit_mcr_t *) HW_PIT_MCR_ADDR)
+#define HW_PIT_MCR_RD()          (HW_PIT_MCR.U)
+#define HW_PIT_MCR_WR(v)         (HW_PIT_MCR.U = (v))
+#define HW_PIT_MCR_SET(v)        (HW_PIT_MCR_WR(HW_PIT_MCR_RD() |  (v)))
+#define HW_PIT_MCR_CLR(v)        (HW_PIT_MCR_WR(HW_PIT_MCR_RD() & ~(v)))
+#define HW_PIT_MCR_TOG(v)        (HW_PIT_MCR_WR(HW_PIT_MCR_RD() ^  (v)))
+#endif
+//@}
+
+/*
+ * Constants & macros for individual PIT_MCR bitfields
+ */
+
+/*!
+ * @name Register PIT_MCR, field FRZ[0] (RW)
+ *
+ * Allows the timers to be stopped when the device enters the Debug mode.
+ *
+ * Values:
+ * - 0 - Timers continue to run in Debug mode.
+ * - 1 - Timers are stopped in Debug mode.
+ */
+//@{
+#define BP_PIT_MCR_FRZ       (0U)          //!< Bit position for PIT_MCR_FRZ.
+#define BM_PIT_MCR_FRZ       (0x00000001U) //!< Bit mask for PIT_MCR_FRZ.
+#define BS_PIT_MCR_FRZ       (1U)          //!< Bit field size in bits for PIT_MCR_FRZ.
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Read current value of the PIT_MCR_FRZ field.
+#define BR_PIT_MCR_FRZ       (BITBAND_ACCESS32(HW_PIT_MCR_ADDR, BP_PIT_MCR_FRZ))
+#endif
+
+//! @brief Format value for bitfield PIT_MCR_FRZ.
+#define BF_PIT_MCR_FRZ(v)    (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PIT_MCR_FRZ), uint32_t) & BM_PIT_MCR_FRZ)
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Set the FRZ field to a new value.
+#define BW_PIT_MCR_FRZ(v)    (BITBAND_ACCESS32(HW_PIT_MCR_ADDR, BP_PIT_MCR_FRZ) = (v))
+#endif
+//@}
+
+/*!
+ * @name Register PIT_MCR, field MDIS[1] (RW)
+ *
+ * Disables the standard timers. This field must be enabled before any other
+ * setup is done.
+ *
+ * Values:
+ * - 0 - Clock for standard PIT timers is enabled.
+ * - 1 - Clock for standard PIT timers is disabled.
+ */
+//@{
+#define BP_PIT_MCR_MDIS      (1U)          //!< Bit position for PIT_MCR_MDIS.
+#define BM_PIT_MCR_MDIS      (0x00000002U) //!< Bit mask for PIT_MCR_MDIS.
+#define BS_PIT_MCR_MDIS      (1U)          //!< Bit field size in bits for PIT_MCR_MDIS.
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Read current value of the PIT_MCR_MDIS field.
+#define BR_PIT_MCR_MDIS      (BITBAND_ACCESS32(HW_PIT_MCR_ADDR, BP_PIT_MCR_MDIS))
+#endif
+
+//! @brief Format value for bitfield PIT_MCR_MDIS.
+#define BF_PIT_MCR_MDIS(v)   (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PIT_MCR_MDIS), uint32_t) & BM_PIT_MCR_MDIS)
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Set the MDIS field to a new value.
+#define BW_PIT_MCR_MDIS(v)   (BITBAND_ACCESS32(HW_PIT_MCR_ADDR, BP_PIT_MCR_MDIS) = (v))
+#endif
+//@}
+
+//-------------------------------------------------------------------------------------------
+// HW_PIT_LDVALn - Timer Load Value Register
+//-------------------------------------------------------------------------------------------
+
+#ifndef __LANGUAGE_ASM__
+/*!
+ * @brief HW_PIT_LDVALn - Timer Load Value Register (RW)
+ *
+ * Reset value: 0x00000000U
+ *
+ * These registers select the timeout period for the timer interrupts.
+ */
+typedef union _hw_pit_ldvaln
+{
+    uint32_t U;
+    struct _hw_pit_ldvaln_bitfields
+    {
+        uint32_t TSV : 32;             //!< [31:0] Timer Start Value
+    } B;
+} hw_pit_ldvaln_t;
+#endif
+
+/*!
+ * @name Constants and macros for entire PIT_LDVALn register
+ */
+//@{
+#define HW_PIT_LDVALn_COUNT (4U)
+
+#define HW_PIT_LDVALn_ADDR(n)    (REGS_PIT_BASE + 0x100U + (0x10U * n))
+
+#ifndef __LANGUAGE_ASM__
+#define HW_PIT_LDVALn(n)         (*(__IO hw_pit_ldvaln_t *) HW_PIT_LDVALn_ADDR(n))
+#define HW_PIT_LDVALn_RD(n)      (HW_PIT_LDVALn(n).U)
+#define HW_PIT_LDVALn_WR(n, v)   (HW_PIT_LDVALn(n).U = (v))
+#define HW_PIT_LDVALn_SET(n, v)  (HW_PIT_LDVALn_WR(n, HW_PIT_LDVALn_RD(n) |  (v)))
+#define HW_PIT_LDVALn_CLR(n, v)  (HW_PIT_LDVALn_WR(n, HW_PIT_LDVALn_RD(n) & ~(v)))
+#define HW_PIT_LDVALn_TOG(n, v)  (HW_PIT_LDVALn_WR(n, HW_PIT_LDVALn_RD(n) ^  (v)))
+#endif
+//@}
+
+/*
+ * Constants & macros for individual PIT_LDVALn bitfields
+ */
+
+/*!
+ * @name Register PIT_LDVALn, field TSV[31:0] (RW)
+ *
+ * Sets the timer start value. The timer will count down until it reaches 0,
+ * then it will generate an interrupt and load this register value again. Writing a
+ * new value to this register will not restart the timer; instead the value will
+ * be loaded after the timer expires. To abort the current cycle and start a
+ * timer period with the new value, the timer must be disabled and enabled again.
+ */
+//@{
+#define BP_PIT_LDVALn_TSV    (0U)          //!< Bit position for PIT_LDVALn_TSV.
+#define BM_PIT_LDVALn_TSV    (0xFFFFFFFFU) //!< Bit mask for PIT_LDVALn_TSV.
+#define BS_PIT_LDVALn_TSV    (32U)         //!< Bit field size in bits for PIT_LDVALn_TSV.
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Read current value of the PIT_LDVALn_TSV field.
+#define BR_PIT_LDVALn_TSV(n) (HW_PIT_LDVALn(n).U)
+#endif
+
+//! @brief Format value for bitfield PIT_LDVALn_TSV.
+#define BF_PIT_LDVALn_TSV(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PIT_LDVALn_TSV), uint32_t) & BM_PIT_LDVALn_TSV)
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Set the TSV field to a new value.
+#define BW_PIT_LDVALn_TSV(n, v) (HW_PIT_LDVALn_WR(n, v))
+#endif
+//@}
+//-------------------------------------------------------------------------------------------
+// HW_PIT_CVALn - Current Timer Value Register
+//-------------------------------------------------------------------------------------------
+
+#ifndef __LANGUAGE_ASM__
+/*!
+ * @brief HW_PIT_CVALn - Current Timer Value Register (RO)
+ *
+ * Reset value: 0x00000000U
+ *
+ * These registers indicate the current timer position.
+ */
+typedef union _hw_pit_cvaln
+{
+    uint32_t U;
+    struct _hw_pit_cvaln_bitfields
+    {
+        uint32_t TVL : 32;             //!< [31:0] Current Timer Value
+    } B;
+} hw_pit_cvaln_t;
+#endif
+
+/*!
+ * @name Constants and macros for entire PIT_CVALn register
+ */
+//@{
+#define HW_PIT_CVALn_COUNT (4U)
+
+#define HW_PIT_CVALn_ADDR(n)     (REGS_PIT_BASE + 0x104U + (0x10U * n))
+
+#ifndef __LANGUAGE_ASM__
+#define HW_PIT_CVALn(n)          (*(__I hw_pit_cvaln_t *) HW_PIT_CVALn_ADDR(n))
+#define HW_PIT_CVALn_RD(n)       (HW_PIT_CVALn(n).U)
+#endif
+//@}
+
+/*
+ * Constants & macros for individual PIT_CVALn bitfields
+ */
+
+/*!
+ * @name Register PIT_CVALn, field TVL[31:0] (RO)
+ *
+ * Represents the current timer value, if the timer is enabled. If the timer is
+ * disabled, do not use this field as its value is unreliable. The timer uses a
+ * downcounter. The timer values are frozen in Debug mode if MCR[FRZ] is set.
+ */
+//@{
+#define BP_PIT_CVALn_TVL     (0U)          //!< Bit position for PIT_CVALn_TVL.
+#define BM_PIT_CVALn_TVL     (0xFFFFFFFFU) //!< Bit mask for PIT_CVALn_TVL.
+#define BS_PIT_CVALn_TVL     (32U)         //!< Bit field size in bits for PIT_CVALn_TVL.
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Read current value of the PIT_CVALn_TVL field.
+#define BR_PIT_CVALn_TVL(n)  (HW_PIT_CVALn(n).U)
+#endif
+//@}
+//-------------------------------------------------------------------------------------------
+// HW_PIT_TCTRLn - Timer Control Register
+//-------------------------------------------------------------------------------------------
+
+#ifndef __LANGUAGE_ASM__
+/*!
+ * @brief HW_PIT_TCTRLn - Timer Control Register (RW)
+ *
+ * Reset value: 0x00000000U
+ *
+ * These registers contain the control bits for each timer.
+ */
+typedef union _hw_pit_tctrln
+{
+    uint32_t U;
+    struct _hw_pit_tctrln_bitfields
+    {
+        uint32_t TEN : 1;              //!< [0] Timer Enable
+        uint32_t TIE : 1;              //!< [1] Timer Interrupt Enable
+        uint32_t CHN : 1;              //!< [2] Chain Mode
+        uint32_t RESERVED0 : 29;       //!< [31:3]
+    } B;
+} hw_pit_tctrln_t;
+#endif
+
+/*!
+ * @name Constants and macros for entire PIT_TCTRLn register
+ */
+//@{
+#define HW_PIT_TCTRLn_COUNT (4U)
+
+#define HW_PIT_TCTRLn_ADDR(n)    (REGS_PIT_BASE + 0x108U + (0x10U * n))
+
+#ifndef __LANGUAGE_ASM__
+#define HW_PIT_TCTRLn(n)         (*(__IO hw_pit_tctrln_t *) HW_PIT_TCTRLn_ADDR(n))
+#define HW_PIT_TCTRLn_RD(n)      (HW_PIT_TCTRLn(n).U)
+#define HW_PIT_TCTRLn_WR(n, v)   (HW_PIT_TCTRLn(n).U = (v))
+#define HW_PIT_TCTRLn_SET(n, v)  (HW_PIT_TCTRLn_WR(n, HW_PIT_TCTRLn_RD(n) |  (v)))
+#define HW_PIT_TCTRLn_CLR(n, v)  (HW_PIT_TCTRLn_WR(n, HW_PIT_TCTRLn_RD(n) & ~(v)))
+#define HW_PIT_TCTRLn_TOG(n, v)  (HW_PIT_TCTRLn_WR(n, HW_PIT_TCTRLn_RD(n) ^  (v)))
+#endif
+//@}
+
+/*
+ * Constants & macros for individual PIT_TCTRLn bitfields
+ */
+
+/*!
+ * @name Register PIT_TCTRLn, field TEN[0] (RW)
+ *
+ * Enables or disables the timer.
+ *
+ * Values:
+ * - 0 - Timer n is disabled.
+ * - 1 - Timer n is enabled.
+ */
+//@{
+#define BP_PIT_TCTRLn_TEN    (0U)          //!< Bit position for PIT_TCTRLn_TEN.
+#define BM_PIT_TCTRLn_TEN    (0x00000001U) //!< Bit mask for PIT_TCTRLn_TEN.
+#define BS_PIT_TCTRLn_TEN    (1U)          //!< Bit field size in bits for PIT_TCTRLn_TEN.
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Read current value of the PIT_TCTRLn_TEN field.
+#define BR_PIT_TCTRLn_TEN(n) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(n), BP_PIT_TCTRLn_TEN))
+#endif
+
+//! @brief Format value for bitfield PIT_TCTRLn_TEN.
+#define BF_PIT_TCTRLn_TEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PIT_TCTRLn_TEN), uint32_t) & BM_PIT_TCTRLn_TEN)
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Set the TEN field to a new value.
+#define BW_PIT_TCTRLn_TEN(n, v) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(n), BP_PIT_TCTRLn_TEN) = (v))
+#endif
+//@}
+
+/*!
+ * @name Register PIT_TCTRLn, field TIE[1] (RW)
+ *
+ * When an interrupt is pending, or, TFLGn[TIF] is set, enabling the interrupt
+ * will immediately cause an interrupt event. To avoid this, the associated
+ * TFLGn[TIF] must be cleared first.
+ *
+ * Values:
+ * - 0 - Interrupt requests from Timer n are disabled.
+ * - 1 - Interrupt will be requested whenever TIF is set.
+ */
+//@{
+#define BP_PIT_TCTRLn_TIE    (1U)          //!< Bit position for PIT_TCTRLn_TIE.
+#define BM_PIT_TCTRLn_TIE    (0x00000002U) //!< Bit mask for PIT_TCTRLn_TIE.
+#define BS_PIT_TCTRLn_TIE    (1U)          //!< Bit field size in bits for PIT_TCTRLn_TIE.
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Read current value of the PIT_TCTRLn_TIE field.
+#define BR_PIT_TCTRLn_TIE(n) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(n), BP_PIT_TCTRLn_TIE))
+#endif
+
+//! @brief Format value for bitfield PIT_TCTRLn_TIE.
+#define BF_PIT_TCTRLn_TIE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PIT_TCTRLn_TIE), uint32_t) & BM_PIT_TCTRLn_TIE)
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Set the TIE field to a new value.
+#define BW_PIT_TCTRLn_TIE(n, v) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(n), BP_PIT_TCTRLn_TIE) = (v))
+#endif
+//@}
+
+/*!
+ * @name Register PIT_TCTRLn, field CHN[2] (RW)
+ *
+ * When activated, Timer n-1 needs to expire before timer n can decrement by 1.
+ * Timer 0 cannot be chained.
+ *
+ * Values:
+ * - 0 - Timer is not chained.
+ * - 1 - Timer is chained to previous timer. For example, for Channel 2, if this
+ *     field is set, Timer 2 is chained to Timer 1.
+ */
+//@{
+#define BP_PIT_TCTRLn_CHN    (2U)          //!< Bit position for PIT_TCTRLn_CHN.
+#define BM_PIT_TCTRLn_CHN    (0x00000004U) //!< Bit mask for PIT_TCTRLn_CHN.
+#define BS_PIT_TCTRLn_CHN    (1U)          //!< Bit field size in bits for PIT_TCTRLn_CHN.
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Read current value of the PIT_TCTRLn_CHN field.
+#define BR_PIT_TCTRLn_CHN(n) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(n), BP_PIT_TCTRLn_CHN))
+#endif
+
+//! @brief Format value for bitfield PIT_TCTRLn_CHN.
+#define BF_PIT_TCTRLn_CHN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PIT_TCTRLn_CHN), uint32_t) & BM_PIT_TCTRLn_CHN)
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Set the CHN field to a new value.
+#define BW_PIT_TCTRLn_CHN(n, v) (BITBAND_ACCESS32(HW_PIT_TCTRLn_ADDR(n), BP_PIT_TCTRLn_CHN) = (v))
+#endif
+//@}
+//-------------------------------------------------------------------------------------------
+// HW_PIT_TFLGn - Timer Flag Register
+//-------------------------------------------------------------------------------------------
+
+#ifndef __LANGUAGE_ASM__
+/*!
+ * @brief HW_PIT_TFLGn - Timer Flag Register (RW)
+ *
+ * Reset value: 0x00000000U
+ *
+ * These registers hold the PIT interrupt flags.
+ */
+typedef union _hw_pit_tflgn
+{
+    uint32_t U;
+    struct _hw_pit_tflgn_bitfields
+    {
+        uint32_t TIF : 1;              //!< [0] Timer Interrupt Flag
+        uint32_t RESERVED0 : 31;       //!< [31:1]
+    } B;
+} hw_pit_tflgn_t;
+#endif
+
+/*!
+ * @name Constants and macros for entire PIT_TFLGn register
+ */
+//@{
+#define HW_PIT_TFLGn_COUNT (4U)
+
+#define HW_PIT_TFLGn_ADDR(n)     (REGS_PIT_BASE + 0x10CU + (0x10U * n))
+
+#ifndef __LANGUAGE_ASM__
+#define HW_PIT_TFLGn(n)          (*(__IO hw_pit_tflgn_t *) HW_PIT_TFLGn_ADDR(n))
+#define HW_PIT_TFLGn_RD(n)       (HW_PIT_TFLGn(n).U)
+#define HW_PIT_TFLGn_WR(n, v)    (HW_PIT_TFLGn(n).U = (v))
+#define HW_PIT_TFLGn_SET(n, v)   (HW_PIT_TFLGn_WR(n, HW_PIT_TFLGn_RD(n) |  (v)))
+#define HW_PIT_TFLGn_CLR(n, v)   (HW_PIT_TFLGn_WR(n, HW_PIT_TFLGn_RD(n) & ~(v)))
+#define HW_PIT_TFLGn_TOG(n, v)   (HW_PIT_TFLGn_WR(n, HW_PIT_TFLGn_RD(n) ^  (v)))
+#endif
+//@}
+
+/*
+ * Constants & macros for individual PIT_TFLGn bitfields
+ */
+
+/*!
+ * @name Register PIT_TFLGn, field TIF[0] (W1C)
+ *
+ * Sets to 1 at the end of the timer period. Writing 1 to this flag clears it.
+ * Writing 0 has no effect. If enabled, or, when TCTRLn[TIE] = 1, TIF causes an
+ * interrupt request.
+ *
+ * Values:
+ * - 0 - Timeout has not yet occurred.
+ * - 1 - Timeout has occurred.
+ */
+//@{
+#define BP_PIT_TFLGn_TIF     (0U)          //!< Bit position for PIT_TFLGn_TIF.
+#define BM_PIT_TFLGn_TIF     (0x00000001U) //!< Bit mask for PIT_TFLGn_TIF.
+#define BS_PIT_TFLGn_TIF     (1U)          //!< Bit field size in bits for PIT_TFLGn_TIF.
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Read current value of the PIT_TFLGn_TIF field.
+#define BR_PIT_TFLGn_TIF(n)  (BITBAND_ACCESS32(HW_PIT_TFLGn_ADDR(n), BP_PIT_TFLGn_TIF))
+#endif
+
+//! @brief Format value for bitfield PIT_TFLGn_TIF.
+#define BF_PIT_TFLGn_TIF(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PIT_TFLGn_TIF), uint32_t) & BM_PIT_TFLGn_TIF)
+
+#ifndef __LANGUAGE_ASM__
+//! @brief Set the TIF field to a new value.
+#define BW_PIT_TFLGn_TIF(n, v) (BITBAND_ACCESS32(HW_PIT_TFLGn_ADDR(n), BP_PIT_TFLGn_TIF) = (v))
+#endif
+//@}
+
+//-------------------------------------------------------------------------------------------
+// hw_pit_t - module struct
+//-------------------------------------------------------------------------------------------
+/*!
+ * @brief All PIT module registers.
+ */
+#ifndef __LANGUAGE_ASM__
+#pragma pack(1)
+typedef struct _hw_pit
+{
+    __IO hw_pit_mcr_t MCR;                 //!< [0x0] PIT Module Control Register
+    uint8_t _reserved0[252];
+    struct {
+        __IO hw_pit_ldvaln_t LDVALn;       //!< [0x100] Timer Load Value Register
+        __I hw_pit_cvaln_t CVALn;          //!< [0x104] Current Timer Value Register
+        __IO hw_pit_tctrln_t TCTRLn;       //!< [0x108] Timer Control Register
+        __IO hw_pit_tflgn_t TFLGn;         //!< [0x10C] Timer Flag Register
+    } CHANNEL[4];
+} hw_pit_t;
+#pragma pack()
+
+//! @brief Macro to access all PIT registers.
+//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
+//!     use the '&' operator, like <code>&HW_PIT</code>.
+#define HW_PIT         (*(hw_pit_t *) REGS_PIT_BASE)
+#endif
+
+#endif // __HW_PIT_REGISTERS_H__
+// v22/130726/0.9
+// EOF