Diff: TARGET_NUCLEO_L152RE/stm32l1xx_conf.h

Revision:

77:869cf507173a

Child:

81:7d30d6019079

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/stm32l1xx_conf.h	Fri Feb 14 14:36:43 2014 +0000
@@ -0,0 +1,85 @@
+/**
+  ******************************************************************************
+  * @file    Project/STM32L1xx_StdPeriph_Templates/stm32l1xx_conf.h 
+  * @author  MCD Application Team
+  * @version V1.1.1
+  * @date    13-April-2012
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_CONF_H
+#define __STM32L1xx_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment/Comment the line below to enable/disable peripheral header file inclusion */
+#include "stm32l1xx_adc.h"
+//#include "stm32l1xx_aes.h"
+//#include "stm32l1xx_comp.h"
+//#include "stm32l1xx_crc.h"
+#include "stm32l1xx_dac.h"
+#include "stm32l1xx_dbgmcu.h"
+//#include "stm32l1xx_dma.h"
+#include "stm32l1xx_exti.h"
+//#include "stm32l1xx_flash.h"
+//#include "stm32l1xx_fsmc.h"
+#include "stm32l1xx_gpio.h"
+#include "stm32l1xx_i2c.h"
+//#include "stm32l1xx_iwdg.h"
+//#include "stm32l1xx_lcd.h"
+//#include "stm32l1xx_opamp.h"
+#include "stm32l1xx_pwr.h"
+#include "stm32l1xx_rcc.h"
+#include "stm32l1xx_rtc.h"
+#include "stm32l1xx_sdio.h"
+#include "stm32l1xx_spi.h"
+#include "stm32l1xx_syscfg.h"
+#include "stm32l1xx_tim.h"
+#include "stm32l1xx_usart.h"
+//#include "stm32l1xx_wwdg.h"
+#include "misc.h"  /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the 
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function which reports 
+  *         the name of the source file and the source line number of the call 
+  *         that failed. If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32L1xx_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/