Diff: TARGET_NUCLEO_F030R8/stm32f0xx_can.h

Revision:

77:869cf507173a

Child:

81:7d30d6019079

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_can.h	Fri Feb 14 14:36:43 2014 +0000
@@ -0,0 +1,643 @@
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_can.h
+  * @author  MCD Application Team
+  * @version V1.3.0
+  * @date    16-January-2014
+  * @brief   This file contains all the functions prototypes for the CAN firmware 
+  *          library, applicable only for STM32F072 devices.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_CAN_H
+#define __STM32F0xx_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup CAN
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+
+#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN))
+
+/** 
+  * @brief  CAN init structure definition
+  */
+typedef struct
+{
+  uint16_t CAN_Prescaler;   /*!< Specifies the length of a time quantum. 
+                                 It ranges from 1 to 1024. */
+  
+  uint8_t CAN_Mode;         /*!< Specifies the CAN operating mode.
+                                 This parameter can be a value of @ref CAN_operating_mode */
+
+  uint8_t CAN_SJW;          /*!< Specifies the maximum number of time quanta 
+                                 the CAN hardware is allowed to lengthen or 
+                                 shorten a bit to perform resynchronization.
+                                 This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+  uint8_t CAN_BS1;          /*!< Specifies the number of time quanta in Bit 
+                                 Segment 1. This parameter can be a value of 
+                                 @ref CAN_time_quantum_in_bit_segment_1 */
+
+  uint8_t CAN_BS2;          /*!< Specifies the number of time quanta in Bit Segment 2.
+                                 This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+  
+  FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered communication mode.
+                                This parameter can be set either to ENABLE or DISABLE. */
+  
+  FunctionalState CAN_ABOM;  /*!< Enable or disable the automatic bus-off management.
+                                  This parameter can be set either to ENABLE or DISABLE. */
+
+  FunctionalState CAN_AWUM;  /*!< Enable or disable the automatic wake-up mode. 
+                                  This parameter can be set either to ENABLE or DISABLE. */
+
+  FunctionalState CAN_NART;  /*!< Enable or disable the non-automatic retransmission mode.
+                                  This parameter can be set either to ENABLE or DISABLE. */
+
+  FunctionalState CAN_RFLM;  /*!< Enable or disable the Receive FIFO Locked mode.
+                                  This parameter can be set either to ENABLE or DISABLE. */
+
+  FunctionalState CAN_TXFP;  /*!< Enable or disable the transmit FIFO priority.
+                                  This parameter can be set either to ENABLE or DISABLE. */
+} CAN_InitTypeDef;
+
+/** 
+  * @brief  CAN filter init structure definition
+  */
+typedef struct
+{
+  uint16_t CAN_FilterIdHigh;         /*!< Specifies the filter identification number (MSBs for a 32-bit
+                                              configuration, first one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterIdLow;          /*!< Specifies the filter identification number (LSBs for a 32-bit
+                                              configuration, second one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterMaskIdHigh;     /*!< Specifies the filter mask number or identification number,
+                                              according to the mode (MSBs for a 32-bit configuration,
+                                              first one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterMaskIdLow;      /*!< Specifies the filter mask number or identification number,
+                                              according to the mode (LSBs for a 32-bit configuration,
+                                              second one for a 16-bit configuration).
+                                              This parameter can be a value between 0x0000 and 0xFFFF */
+
+  uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+                                              This parameter can be a value of @ref CAN_filter_FIFO */
+  
+  uint8_t CAN_FilterNumber;          /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */
+
+  uint8_t CAN_FilterMode;            /*!< Specifies the filter mode to be initialized.
+                                              This parameter can be a value of @ref CAN_filter_mode */
+
+  uint8_t CAN_FilterScale;           /*!< Specifies the filter scale.
+                                              This parameter can be a value of @ref CAN_filter_scale */
+
+  FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter.
+                                              This parameter can be set either to ENABLE or DISABLE. */
+} CAN_FilterInitTypeDef;
+
+/** 
+  * @brief  CAN Tx message structure definition  
+  */
+typedef struct
+{
+  uint32_t StdId;  /*!< Specifies the standard identifier.
+                        This parameter can be a value between 0 to 0x7FF. */
+
+  uint32_t ExtId;  /*!< Specifies the extended identifier.
+                        This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+  uint8_t IDE;     /*!< Specifies the type of identifier for the message that 
+                        will be transmitted. This parameter can be a value 
+                        of @ref CAN_identifier_type */
+
+  uint8_t RTR;     /*!< Specifies the type of frame for the message that will 
+                        be transmitted. This parameter can be a value of 
+                        @ref CAN_remote_transmission_request */
+
+  uint8_t DLC;     /*!< Specifies the length of the frame that will be 
+                        transmitted. This parameter can be a value between 
+                        0 to 8 */
+
+  uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 
+                        to 0xFF. */
+} CanTxMsg;
+
+/** 
+  * @brief  CAN Rx message structure definition  
+  */
+typedef struct
+{
+  uint32_t StdId;  /*!< Specifies the standard identifier.
+                        This parameter can be a value between 0 to 0x7FF. */
+
+  uint32_t ExtId;  /*!< Specifies the extended identifier.
+                        This parameter can be a value between 0 to 0x1FFFFFFF. */
+
+  uint8_t IDE;     /*!< Specifies the type of identifier for the message that 
+                        will be received. This parameter can be a value of 
+                        @ref CAN_identifier_type */
+
+  uint8_t RTR;     /*!< Specifies the type of frame for the received message.
+                        This parameter can be a value of 
+                        @ref CAN_remote_transmission_request */
+
+  uint8_t DLC;     /*!< Specifies the length of the frame that will be received.
+                        This parameter can be a value between 0 to 8 */
+
+  uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to 
+                        0xFF. */
+
+  uint8_t FMI;     /*!< Specifies the index of the filter the message stored in 
+                        the mailbox passes through. This parameter can be a 
+                        value between 0 to 0xFF */
+} CanRxMsg;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants
+  * @{
+  */
+
+/** @defgroup CAN_InitStatus 
+  * @{
+  */
+
+#define CAN_InitStatus_Failed              ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_InitStatus_Success             ((uint8_t)0x01) /*!< CAN initialization OK */
+
+
+/* Legacy defines */
+#define CANINITFAILED    CAN_InitStatus_Failed
+#define CANINITOK        CAN_InitStatus_Success
+/**
+  * @}
+  */
+
+/** @defgroup CAN_operating_mode 
+  * @{
+  */
+
+#define CAN_Mode_Normal             ((uint8_t)0x00)  /*!< normal mode */
+#define CAN_Mode_LoopBack           ((uint8_t)0x01)  /*!< loopback mode */
+#define CAN_Mode_Silent             ((uint8_t)0x02)  /*!< silent mode */
+#define CAN_Mode_Silent_LoopBack    ((uint8_t)0x03)  /*!< loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || \
+                           ((MODE) == CAN_Mode_LoopBack)|| \
+                           ((MODE) == CAN_Mode_Silent) || \
+                           ((MODE) == CAN_Mode_Silent_LoopBack))
+/**
+  * @}
+  */
+
+
+ /**
+  * @defgroup CAN_operating_mode 
+  * @{
+  */  
+#define CAN_OperatingMode_Initialization  ((uint8_t)0x00) /*!< Initialization mode */
+#define CAN_OperatingMode_Normal          ((uint8_t)0x01) /*!< Normal mode */
+#define CAN_OperatingMode_Sleep           ((uint8_t)0x02) /*!< sleep mode */
+
+
+#define IS_CAN_OPERATING_MODE(MODE) (((MODE) == CAN_OperatingMode_Initialization) ||\
+                                    ((MODE) == CAN_OperatingMode_Normal)|| \
+																		((MODE) == CAN_OperatingMode_Sleep))
+/**
+  * @}
+  */
+  
+/**
+  * @defgroup CAN_operating_mode_status
+  * @{
+  */  
+
+#define CAN_ModeStatus_Failed    ((uint8_t)0x00)                /*!< CAN entering the specific mode failed */
+#define CAN_ModeStatus_Success   ((uint8_t)!CAN_ModeStatus_Failed)   /*!< CAN entering the specific mode Succeed */
+/**
+  * @}
+  */
+
+/** @defgroup CAN_synchronisation_jump_width 
+  * @{
+  */
+#define CAN_SJW_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_SJW_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_SJW_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_SJW_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \
+                         ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 
+  * @{
+  */
+#define CAN_BS1_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_BS1_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_BS1_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_BS1_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+#define CAN_BS1_5tq                 ((uint8_t)0x04)  /*!< 5 time quantum */
+#define CAN_BS1_6tq                 ((uint8_t)0x05)  /*!< 6 time quantum */
+#define CAN_BS1_7tq                 ((uint8_t)0x06)  /*!< 7 time quantum */
+#define CAN_BS1_8tq                 ((uint8_t)0x07)  /*!< 8 time quantum */
+#define CAN_BS1_9tq                 ((uint8_t)0x08)  /*!< 9 time quantum */
+#define CAN_BS1_10tq                ((uint8_t)0x09)  /*!< 10 time quantum */
+#define CAN_BS1_11tq                ((uint8_t)0x0A)  /*!< 11 time quantum */
+#define CAN_BS1_12tq                ((uint8_t)0x0B)  /*!< 12 time quantum */
+#define CAN_BS1_13tq                ((uint8_t)0x0C)  /*!< 13 time quantum */
+#define CAN_BS1_14tq                ((uint8_t)0x0D)  /*!< 14 time quantum */
+#define CAN_BS1_15tq                ((uint8_t)0x0E)  /*!< 15 time quantum */
+#define CAN_BS1_16tq                ((uint8_t)0x0F)  /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq)
+/**
+  * @}
+  */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 
+  * @{
+  */
+#define CAN_BS2_1tq                 ((uint8_t)0x00)  /*!< 1 time quantum */
+#define CAN_BS2_2tq                 ((uint8_t)0x01)  /*!< 2 time quantum */
+#define CAN_BS2_3tq                 ((uint8_t)0x02)  /*!< 3 time quantum */
+#define CAN_BS2_4tq                 ((uint8_t)0x03)  /*!< 4 time quantum */
+#define CAN_BS2_5tq                 ((uint8_t)0x04)  /*!< 5 time quantum */
+#define CAN_BS2_6tq                 ((uint8_t)0x05)  /*!< 6 time quantum */
+#define CAN_BS2_7tq                 ((uint8_t)0x06)  /*!< 7 time quantum */
+#define CAN_BS2_8tq                 ((uint8_t)0x07)  /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq)
+/**
+  * @}
+  */
+
+/** @defgroup CAN_clock_prescaler 
+  * @{
+  */
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_number 
+  * @{
+  */
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_mode 
+  * @{
+  */
+#define CAN_FilterMode_IdMask       ((uint8_t)0x00)  /*!< identifier/mask mode */
+#define CAN_FilterMode_IdList       ((uint8_t)0x01)  /*!< identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \
+                                  ((MODE) == CAN_FilterMode_IdList))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_scale 
+  * @{
+  */
+#define CAN_FilterScale_16bit       ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FilterScale_32bit       ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \
+                                    ((SCALE) == CAN_FilterScale_32bit))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_filter_FIFO
+  * @{
+  */
+#define CAN_Filter_FIFO0             ((uint8_t)0x00)  /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_Filter_FIFO1             ((uint8_t)0x01)  /*!< Filter FIFO 1 assignment for filter x */
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \
+                                  ((FIFO) == CAN_FilterFIFO1))
+
+/* Legacy defines */
+#define CAN_FilterFIFO0  CAN_Filter_FIFO0
+#define CAN_FilterFIFO1  CAN_Filter_FIFO1
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Start_bank_filter_for_slave_CAN 
+  * @{
+  */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_Tx 
+  * @{
+  */
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID)   ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID)   ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC)       ((DLC) <= ((uint8_t)0x08))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_identifier_type 
+  * @{
+  */
+#define CAN_Id_Standard             ((uint32_t)0x00000000)  /*!< Standard Id */
+#define CAN_Id_Extended             ((uint32_t)0x00000004)  /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_Id_Standard) || \
+                               ((IDTYPE) == CAN_Id_Extended))
+
+/* Legacy defines */
+#define CAN_ID_STD      CAN_Id_Standard           
+#define CAN_ID_EXT      CAN_Id_Extended
+/**
+  * @}
+  */
+
+/** @defgroup CAN_remote_transmission_request 
+  * @{
+  */
+#define CAN_RTR_Data                ((uint32_t)0x00000000)  /*!< Data frame */
+#define CAN_RTR_Remote              ((uint32_t)0x00000002)  /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_Data) || ((RTR) == CAN_RTR_Remote))
+
+/* Legacy defines */
+#define CAN_RTR_DATA     CAN_RTR_Data         
+#define CAN_RTR_REMOTE   CAN_RTR_Remote
+/**
+  * @}
+  */
+
+/** @defgroup CAN_transmit_constants 
+  * @{
+  */
+#define CAN_TxStatus_Failed         ((uint8_t)0x00)/*!< CAN transmission failed */
+#define CAN_TxStatus_Ok             ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TxStatus_Pending        ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TxStatus_NoMailBox      ((uint8_t)0x04) /*!< CAN cell did not provide 
+                                                         an empty mailbox */
+/* Legacy defines */	
+#define CANTXFAILED                  CAN_TxStatus_Failed
+#define CANTXOK                      CAN_TxStatus_Ok
+#define CANTXPENDING                 CAN_TxStatus_Pending
+#define CAN_NO_MB                    CAN_TxStatus_NoMailBox
+/**
+  * @}
+  */
+
+/** @defgroup CAN_receive_FIFO_number_constants 
+  * @{
+  */
+#define CAN_FIFO0                 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1                 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+/**
+  * @}
+  */
+
+/** @defgroup CAN_sleep_constants 
+  * @{
+  */
+#define CAN_Sleep_Failed     ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */
+#define CAN_Sleep_Ok         ((uint8_t)0x01) /*!< CAN entered the sleep mode */
+
+/* Legacy defines */	
+#define CANSLEEPFAILED   CAN_Sleep_Failed
+#define CANSLEEPOK       CAN_Sleep_Ok
+/**
+  * @}
+  */
+
+/** @defgroup CAN_wake_up_constants 
+  * @{
+  */
+#define CAN_WakeUp_Failed        ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */
+#define CAN_WakeUp_Ok            ((uint8_t)0x01) /*!< CAN leaved the sleep mode */
+
+/* Legacy defines */
+#define CANWAKEUPFAILED   CAN_WakeUp_Failed        
+#define CANWAKEUPOK       CAN_WakeUp_Ok        
+/**
+  * @}
+  */
+
+/**
+  * @defgroup CAN_Error_Code_constants
+  * @{
+  */                                                         
+#define CAN_ErrorCode_NoErr           ((uint8_t)0x00) /*!< No Error */ 
+#define	CAN_ErrorCode_StuffErr        ((uint8_t)0x10) /*!< Stuff Error */ 
+#define	CAN_ErrorCode_FormErr         ((uint8_t)0x20) /*!< Form Error */ 
+#define	CAN_ErrorCode_ACKErr          ((uint8_t)0x30) /*!< Acknowledgment Error */ 
+#define	CAN_ErrorCode_BitRecessiveErr ((uint8_t)0x40) /*!< Bit Recessive Error */ 
+#define	CAN_ErrorCode_BitDominantErr  ((uint8_t)0x50) /*!< Bit Dominant Error */ 
+#define	CAN_ErrorCode_CRCErr          ((uint8_t)0x60) /*!< CRC Error  */ 
+#define	CAN_ErrorCode_SoftwareSetErr  ((uint8_t)0x70) /*!< Software Set Error */ 
+/**
+  * @}
+  */
+
+/** @defgroup CAN_flags 
+  * @{
+  */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+   and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with 
+   CAN_GetFlagStatus() function.  */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0             ((uint32_t)0x38000001) /*!< Request MailBox0 Flag */
+#define CAN_FLAG_RQCP1             ((uint32_t)0x38000100) /*!< Request MailBox1 Flag */
+#define CAN_FLAG_RQCP2             ((uint32_t)0x38010000) /*!< Request MailBox2 Flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FMP0              ((uint32_t)0x12000003) /*!< FIFO 0 Message Pending Flag */
+#define CAN_FLAG_FF0               ((uint32_t)0x32000008) /*!< FIFO 0 Full Flag            */
+#define CAN_FLAG_FOV0              ((uint32_t)0x32000010) /*!< FIFO 0 Overrun Flag         */
+#define CAN_FLAG_FMP1              ((uint32_t)0x14000003) /*!< FIFO 1 Message Pending Flag */
+#define CAN_FLAG_FF1               ((uint32_t)0x34000008) /*!< FIFO 1 Full Flag            */
+#define CAN_FLAG_FOV1              ((uint32_t)0x34000010) /*!< FIFO 1 Overrun Flag         */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU               ((uint32_t)0x31000008) /*!< Wake up Flag */
+#define CAN_FLAG_SLAK              ((uint32_t)0x31000012) /*!< Sleep acknowledge Flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. 
+         In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG               ((uint32_t)0x10F00001) /*!< Error Warning Flag   */
+#define CAN_FLAG_EPV               ((uint32_t)0x10F00002) /*!< Error Passive Flag   */
+#define CAN_FLAG_BOF               ((uint32_t)0x10F00004) /*!< Bus-Off Flag         */
+#define CAN_FLAG_LEC               ((uint32_t)0x30F00070) /*!< Last error code Flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_LEC)  || ((FLAG) == CAN_FLAG_BOF)   || \
+                               ((FLAG) == CAN_FLAG_EPV)  || ((FLAG) == CAN_FLAG_EWG)   || \
+                               ((FLAG) == CAN_FLAG_WKU)  || ((FLAG) == CAN_FLAG_FOV0)  || \
+                               ((FLAG) == CAN_FLAG_FF0)  || ((FLAG) == CAN_FLAG_FMP0)  || \
+                               ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1)   || \
+                               ((FLAG) == CAN_FLAG_FMP1) || ((FLAG) == CAN_FLAG_RQCP2) || \
+                               ((FLAG) == CAN_FLAG_RQCP1)|| ((FLAG) == CAN_FLAG_RQCP0) || \
+                               ((FLAG) == CAN_FLAG_SLAK ))
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_LEC) || ((FLAG) == CAN_FLAG_RQCP2) || \
+                                ((FLAG) == CAN_FLAG_RQCP1)  || ((FLAG) == CAN_FLAG_RQCP0) || \
+                                ((FLAG) == CAN_FLAG_FF0)  || ((FLAG) == CAN_FLAG_FOV0) ||\
+                                ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
+                                ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_SLAK))
+/**
+  * @}
+  */
+
+  
+/** @defgroup CAN_interrupts 
+  * @{
+  */ 
+#define CAN_IT_TME                  ((uint32_t)0x00000001) /*!< Transmit mailbox empty Interrupt*/
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0                 ((uint32_t)0x00000002) /*!< FIFO 0 message pending Interrupt*/
+#define CAN_IT_FF0                  ((uint32_t)0x00000004) /*!< FIFO 0 full Interrupt*/
+#define CAN_IT_FOV0                 ((uint32_t)0x00000008) /*!< FIFO 0 overrun Interrupt*/
+#define CAN_IT_FMP1                 ((uint32_t)0x00000010) /*!< FIFO 1 message pending Interrupt*/
+#define CAN_IT_FF1                  ((uint32_t)0x00000020) /*!< FIFO 1 full Interrupt*/
+#define CAN_IT_FOV1                 ((uint32_t)0x00000040) /*!< FIFO 1 overrun Interrupt*/
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU                  ((uint32_t)0x00010000) /*!< Wake-up Interrupt*/
+#define CAN_IT_SLK                  ((uint32_t)0x00020000) /*!< Sleep acknowledge Interrupt*/
+
+/* Error Interrupts */
+#define CAN_IT_EWG                  ((uint32_t)0x00000100) /*!< Error warning Interrupt*/
+#define CAN_IT_EPV                  ((uint32_t)0x00000200) /*!< Error passive Interrupt*/
+#define CAN_IT_BOF                  ((uint32_t)0x00000400) /*!< Bus-off Interrupt*/
+#define CAN_IT_LEC                  ((uint32_t)0x00000800) /*!< Last error code Interrupt*/
+#define CAN_IT_ERR                  ((uint32_t)0x00008000) /*!< Error Interrupt*/
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0   CAN_IT_TME
+#define CAN_IT_RQCP1   CAN_IT_TME
+#define CAN_IT_RQCP2   CAN_IT_TME
+
+
+#define IS_CAN_IT(IT)        (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0)  ||\
+                             ((IT) == CAN_IT_FF0)  || ((IT) == CAN_IT_FOV0)  ||\
+                             ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1)   ||\
+                             ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG)   ||\
+                             ((IT) == CAN_IT_EPV)  || ((IT) == CAN_IT_BOF)   ||\
+                             ((IT) == CAN_IT_LEC)  || ((IT) == CAN_IT_ERR)   ||\
+                             ((IT) == CAN_IT_WKU)  || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0)    ||\
+                             ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1)    ||\
+                             ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG)    ||\
+                             ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF)    ||\
+                             ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR)    ||\
+                             ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/  
+
+/*  Function used to set the CAN configuration to the default reset state *****/ 
+void CAN_DeInit(CAN_TypeDef* CANx);
+
+/* Initialization and Configuration functions *********************************/ 
+uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct);
+void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct);
+void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct);
+void CAN_SlaveStartBank(uint8_t CAN_BankNumber); 
+void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState);
+void CAN_TTComModeCmd(CAN_TypeDef* CANx, FunctionalState NewState);
+
+/* CAN Frames Transmission functions ******************************************/
+uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage);
+uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox);
+void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox);
+
+/* CAN Frames Reception functions *********************************************/
+void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage);
+void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber);
+uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber);
+
+/* Operation modes functions **************************************************/
+uint8_t CAN_OperatingModeRequest(CAN_TypeDef* CANx, uint8_t CAN_OperatingMode);
+uint8_t CAN_Sleep(CAN_TypeDef* CANx);
+uint8_t CAN_WakeUp(CAN_TypeDef* CANx);
+
+/* CAN Bus Error management functions *****************************************/
+uint8_t CAN_GetLastErrorCode(CAN_TypeDef* CANx);
+uint8_t CAN_GetReceiveErrorCounter(CAN_TypeDef* CANx);
+uint8_t CAN_GetLSBTransmitErrorCounter(CAN_TypeDef* CANx);
+
+/* Interrupts and flags management functions **********************************/
+void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState);
+FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG);
+ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT);
+void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_CAN_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/