mbed library sources

Dependents:   Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more

Superseded

This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.

Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.

If you are looking for a stable and tested release, please import one of the official mbed library releases:

Import librarymbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

targets/hal/TARGET_Freescale/TARGET_KLXX/rtc_api.c

Committer:
mbed_official
Date:
2015-07-10
Revision:
587:61103edf8a92
Parent:
82:0b31dbcd4769

File content as of revision 587:61103edf8a92:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "rtc_api.h"
#include "PeripheralPins.h"
#include "clk_freqs.h"

static void init(void) {
    // enable RTC clock
    SIM->SCGC6 |= SIM_SCGC6_RTC_MASK;

    // select RTC clock source
    SIM->SOPT1 &= ~SIM_SOPT1_OSC32KSEL_MASK;
    
    // Enable external crystal source if clock source is 32KHz
    if (extosc_frequency()==32768) {
        SIM->SOPT1 |= SIM_SOPT1_OSC32KSEL(OSC32KCLK);
    }
    else{
        // If main clock is NOT 32KHz crystal, use external 32KHz clock source defined in PeripheralPins.c
        SIM->SOPT1 |= SIM_SOPT1_OSC32KSEL(PinMap_RTC[0].peripheral);
        pinmap_pinout(PinMap_RTC[0].pin, PinMap_RTC);        //Map RTC clk input (if not NC)
    }
}

void rtc_init(void) {
    init();

    //Configure the TSR. default value: 1
    RTC->TSR = 1;
    
    if (PinMap_RTC[0].pin == NC) {        //Use OSC32K
        RTC->CR |= RTC_CR_OSCE_MASK;
        //delay for OSCE stabilization
        for(int i=0; i<0x1000; i++) __NOP();
    }

    // enable counter
    RTC->SR |= RTC_SR_TCE_MASK;
}

void rtc_free(void) {
    // [TODO]
}

/*
 * Little check routine to see if the RTC has been enabled
 * 0 = Disabled, 1 = Enabled
 */
int rtc_isenabled(void) {
    // even if the RTC module is enabled,
    // as we use RTC_CLKIN and an external clock,
    // we need to reconfigure the pins. That is why we
    // call init() if the rtc is enabled

    // if RTC not enabled return 0
    SIM->SCGC5 |= SIM_SCGC5_PORTA_MASK;
    SIM->SCGC6 |= SIM_SCGC6_RTC_MASK;
    if ((RTC->SR & RTC_SR_TCE_MASK) == 0)
        return 0;

    init();
    return 1;
}

time_t rtc_read(void) {
    return RTC->TSR;
}

void rtc_write(time_t t) {
    // disable counter
    RTC->SR &= ~RTC_SR_TCE_MASK;

    // we do not write 0 into TSR
    // to avoid invalid time
    if (t == 0)
        t = 1;

    // write seconds
    RTC->TSR = t;

    // re-enable counter
    RTC->SR |= RTC_SR_TCE_MASK;
}