API for communicating with XBee devices.
Dependencies: CircularBuffer FixedLengthList
Dependents: XBeeApiTest XBeeApiSimpleATCmdsExample XBeeApiBroadcastExample XBeeApiBroadcastExampleRTOS ... more
Overview
XBeeApi is intended to be a library for providing a high-level API interface to the XBee - for example getChannel()
and setChannel(2)
methods rather than needing to send( "ATCH" )
and send( "ATCH 2" )
- and then de-code the responses.
See the notebook page here for a description of how the API works & some details on the various classes.
Features:
- Support for transmission & reception of data packets
- Support for reading & changing settings
- Support for "Remote AT" interface to access settings & I/O channels on remote XBees
- XBeeApi should work if you're using mbed-rtos, though it is not currently threadsafe. Take a look at the XBeeApiBroadcastExampleRTOS example if you're including mbed-rtos.
Example Programs
There are also example programs available:
Transmit
Import programXBeeApiSimpleBroadcastExample
Simple example of how to use XBeeApi - set up the XBee, configure P2P networking then transmit a frame.
Import programXBeeApiBroadcastExample
Example for XBeeAPI; a little more involved than XBeeApiSimpleBroadcastExample with report on failure to set up the XBee and on the transmit status of the message.
Import programXBeeApiBroadcastExampleRTOS
Example of using the XBeeApi library to broadcast a message, based on XBeeApiBroadcastExample. This example shows how to use the library when using mbed-rtos. Before compiling you must open "XbeeApi\Config\XBeeApiCfg.hpp" and change the '#if 0' to '#if 1' on the line above the comment reading "Use RTOS features to make XBeeApi threadsafe"
Settings/Status
Import programXBeeApiSimpleATCmdsExample
Simple example of using XBeeApi to send AT-style commands to the XBee
Import programXBeeApiRemoteATCmdsExample
Example of using the XBeeApi library to send AT commands to remote XBee devices in order to read/write settings
Receive
Import programXBeeApiSimpleReceiveExample
Simple example of using XBeeApi to receive data packets via wireless
Import programXBeeApiReceiveCallbackExample
Example of using the XBeeApi library to receive a message via a callback method
Import programXBeeApiReceiveCallbackExampleRTOS
Example of using the XBeeApi library to receive a message via a callback method. This example shows how to use the library when using mbed-rtos. See the comment at the top of main.cpp
Remote I/O
Import programXBeeApiRemoteIOExample
Example of using the XBeeApi library to read inputs on a remote XBee
If you have 2 mbed connected XBees available then you can use XBeeApiSimpleReceiveExample and XBeeApiSimpleBroadcastExample as a pair.
Note that this is still a work in progress! XBeeApiTodoList tracks some of the functionality still to be added.
Utility/XBeeApiSetupHelper.hpp
- Committer:
- johnb
- Date:
- 2014-01-31
- Revision:
- 8:1b48b619d7f6
- Child:
- 38:291aee9eb900
File content as of revision 8:1b48b619d7f6:
/** @file @brief Functions to help with XBee configuration @author John Bailey @copyright Copyright 2014 John Bailey @section LICENSE Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ #if !defined XBEEAPISETUPHELPER_HPP #define XBEEAPISETUPHELPER_HPP #include "XBeeDevice.hpp" #include "XBeeApiCmdAt.hpp" typedef enum { XBEE_NETWORK_TYPE_P2P, XBEE_NETWORK_TYPE_NON_BEACON, XBEE_NETWORK_TYPE_UNKNOWN } XBeeNetworkType_e; /** Set the XBee to use the P2P networking model. Thie helper function assumes that the XBee device and the passed XBeeApiCmdAt-type object have already been configured. This function will block until the settings have been successfully applied or a failure has been encountered. \param p_xbeeCmd Pointer to an XBeeApiCmdAt object which has already been registered as a decoder with an XBee device. \param p_id Network ID to use \param p_chan Channel to use */ extern void xbeeSetNetworkTypeP2P( XBeeApiCmdAt* const p_xbeeCmd, const XBeeApiCmdAt::panId_t p_id, const XBeeApiCmdAt::channel_t p_chan ); #endif /* !defined( XBEEAPISETUPHELPER_HPP ) */