mbed library with additional peripherals for ST F401 board
Fork of mbed-src by
This mbed LIB has additional peripherals for ST F401 board
- UART2 : PA_3 rx, PA_2 tx
- UART3 : PC_7 rx, PC_6 tx
- I2C2 : PB_3 SDA, PB_10 SCL
- I2C3 : PB_4 SDA, PA_8 SCL
Diff: targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_fsmc.c
- Revision:
- 76:aeb1df146756
- Child:
- 80:66393a7b209d
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_fsmc.c Mon Jan 27 14:30:07 2014 +0000 @@ -0,0 +1,285 @@ +/** + ****************************************************************************** + * @file stm32l1xx_fsmc.c + * @author MCD Application Team + * @version V1.2.0 + * @date 22-February-2013 + * @brief This file provides firmware functions to manage the following + * functionalities of the FSMC peripheral: + * + Initialization + * + Interrupts and flags management + * + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2013 STMicroelectronics</center></h2> + * + * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); + * You may not use this file except in compliance with the License. + * You may obtain a copy of the License at: + * + * http://www.st.com/software_license_agreement_liberty_v2 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32l1xx_fsmc.h" +#include "stm32l1xx_rcc.h" + +/** @addtogroup STM32L1xx_StdPeriph_Driver + * @{ + */ + +/** @defgroup FSMC + * @brief FSMC driver modules + * @{ + */ + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/* Private functions ---------------------------------------------------------*/ + +/** @defgroup FSMC_Private_Functions + * @{ + */ + +/** @defgroup FSMC_Group1 NOR/SRAM Controller functions + * @brief NOR/SRAM Controller functions + * + @verbatim + ============================================================================== + ##### NOR-SRAM Controller functions ##### + ============================================================================== + [..] The following sequence should be followed to configure the FSMC to + interface with SRAM, PSRAM, NOR or OneNAND memory connected to the + NOR/SRAM Bank: + (#) Enable the clock for the FSMC and associated GPIOs using the following + functions: + (++)RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE); + (++)RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOx, ENABLE); + (#) FSMC pins configuration + (++) Connect the involved FSMC pins to AF12 using the following function + GPIO_PinAFConfig(GPIOx, GPIO_PinSourcex, GPIO_AF_FSMC); + (++) Configure these FSMC pins in alternate function mode by calling the + function GPIO_Init(); + (#) Declare a FSMC_NORSRAMInitTypeDef structure, for example: + FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure; and fill the + FSMC_NORSRAMInitStructure variable with the allowed values of the + structure member. + (#) Initialize the NOR/SRAM Controller by calling the function + FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); + (#) Then enable the NOR/SRAM Bank, for example: + FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM2, ENABLE); + (#) At this stage you can read/write from/to the memory connected to the + NOR/SRAM Bank. + +@endverbatim + + * @{ + */ + +/** + * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default + * reset values. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @retval None + */ +void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank) +{ + /* Check the parameter */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + + /* FSMC_Bank1_NORSRAM1 */ + if(FSMC_Bank == FSMC_Bank1_NORSRAM1) + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; + } + /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ + else + { + FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; + } + FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; + FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; +} + +/** + * @brief Initializes the FSMC NOR/SRAM Banks according to the specified + * parameters in the FSMC_NORSRAMInitStruct. + * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef + * structure that contains the configuration information for + * the FSMC NOR/SRAM specified Banks. + * @retval None + */ +void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Check the parameters */ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); + assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); + assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); + assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); + assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); + assert_param(IS_FSMC_ASYNWAIT(FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait)); + assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); + assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); + assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); + assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); + assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); + assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); + assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); + + /* Bank1 NOR/SRAM control register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | + FSMC_NORSRAMInitStruct->FSMC_MemoryType | + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | + FSMC_NORSRAMInitStruct->FSMC_WrapMode | + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | + FSMC_NORSRAMInitStruct->FSMC_WriteOperation | + FSMC_NORSRAMInitStruct->FSMC_WaitSignal | + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | + FSMC_NORSRAMInitStruct->FSMC_WriteBurst; + + if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) + { + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)FSMC_BCR1_FACCEN; + } + + /* Bank1 NOR/SRAM timing register configuration */ + FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; + + + /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ + if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) + { + assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); + assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); + assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); + assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); + assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); + assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = + (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | + (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; + } + else + { + FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; + } +} + +/** + * @brief Fills each FSMC_NORSRAMInitStruct member with its default value. + * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef + * structure which will be initialized. + * @retval None + */ +void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) +{ + /* Reset NOR/SRAM Init structure parameters values */ + FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; + FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; + FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; + FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; + FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; + FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; +} + +/** + * @brief Enables or disables the specified NOR/SRAM Memory Bank. + * @param FSMC_Bank: specifies the FSMC Bank to be used + * This parameter can be one of the following values: + * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 + * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 + * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 + * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 + * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. + * @retval None + */ +void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState) +{ + assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); + assert_param(IS_FUNCTIONAL_STATE(NewState)); + + if (NewState != DISABLE) + { + /* Enable the selected NOR/SRAM Bank by setting the MBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] |= FSMC_BCR1_MBKEN; + } + else + { + /* Disable the selected NOR/SRAM Bank by clearing the MBKEN bit in the BCRx register */ + FSMC_Bank1->BTCR[FSMC_Bank] &= (uint32_t)(~FSMC_BCR1_MBKEN); + } +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/