Diff: MultiChannelRelay.h

Revision:

0:661beaa91d83

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MultiChannelRelay.h	Tue Sep 08 16:20:02 2020 +0000
@@ -0,0 +1,107 @@
+/*
+    multi_channel_relay.cpp
+    Seeed multi channel relay Arduino library
+
+    Copyright (c) 2018 Seeed Technology Co., Ltd.
+    Author        :   lambor
+    Create Time   :   June 2018
+    Change Log    :
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+
+#pragma once
+
+#ifndef MULTI_CHANNEL_RELAY_H
+#define MULTI_CHANNEL_RELAY_H
+
+#include "mbed.h"
+#define DEBUG_PRINT pc.printf
+
+
+#define CHANNLE1_BIT  0x01
+#define CHANNLE2_BIT  0x02
+#define CHANNLE3_BIT  0x04
+#define CHANNLE4_BIT  0x08
+#define CHANNLE5_BIT  0x10
+#define CHANNLE6_BIT  0x20
+#define CHANNLE7_BIT  0x40
+#define CHANNLE8_BIT  0x80
+
+#define CMD_CHANNEL_CTRL                    0x10
+#define CMD_SAVE_I2C_ADDR                   0x11
+#define CMD_READ_I2C_ADDR                   0x12
+#define CMD_READ_FIRMWARE_VER           0x13
+
+class MultiChannelRelay
+{
+public:
+    MultiChannelRelay(I2C *i2c, uint8_t slave_adr = 0x11);
+
+    /**
+        @brief Change device address from old_addr to new_addr.
+        @param new_addr, the address to use.
+                        old_addr, the original address
+        @return None
+    */
+    void changeI2CAddress(uint8_t new_addr, uint8_t old_addr);
+
+    /**
+        /brief Get channel state
+        /return One byte value to indicate channel state
+                     the bits range from 0 to 7 represents channel 1 to 8
+    */
+    uint8_t getChannelState(void);
+
+    /**
+        @brief Read firmware version from on board MCU
+        @param
+        @return Firmware version in byte
+    */
+    uint8_t getFirmwareVersion(void);
+
+    /**
+        @brief Control relay channels
+        @param state, use one Byte to represent 8 channel
+        @return None
+    */
+    void channelCtrl(uint8_t state);
+
+    /**
+        @brief Turn on one of 8 channels
+        @param channel, channel to control with (range form 1 to 8)
+        @return None
+    */
+    void turn_on_channel(uint8_t channel);
+
+    /**
+        @brief Turn off on of 8 channels
+        @param channel, channel to control with (range form 1 to 8)
+        @return None
+    */
+    void turn_off_channel(uint8_t channel);
+    
+    bool sendToDevice( char *cmd, int reqSize, int respSize, long msWait );
+
+private:
+    I2C *_i2c;
+    int _i2cAddr;  //  This is the I2C address you want to use
+    int channel_state;  // Value to save channel state
+};
+
+
+
+#endif
\ No newline at end of file