File content as of revision 0:ab0aec01b38e:

// mbed library for 240*320 pixel display TFT

#ifndef MBED_SPI_TFT_H
#define MBED_SPI_TFT_H


#include "GraphicsDisplay.h"
#include "mbed.h"

#define incx() x++, dxt += d2xt, t += dxt
#define incy() y--, dyt += d2yt, t += dyt

#define SPI_F_LO    10000000
#define SPI_F_HI    48000000

/* some RGB565 color definitions                                                 */
#define Black           0x0000      /*   0,   0,   0 */
#define Navy            0x000F      /*   0,   0, 128 */
#define DarkGreen       0x03E0      /*   0, 128,   0 */
#define DarkCyan        0x03EF      /*   0, 128, 128 */
#define Maroon          0x7800      /* 128,   0,   0 */
#define Purple          0x780F      /* 128,   0, 128 */
#define Olive           0x7BE0      /* 128, 128,   0 */
#define LightGrey       0xC618      /* 192, 192, 192 */
#define DarkGrey        0x7BEF      /* 128, 128, 128 */
#define Blue            0x001F      /*   0,   0, 255 */
#define Green           0x07E0      /*   0, 255,   0 */
#define Cyan            0x07FF      /*   0, 255, 255 */
#define Red             0xF800      /* 255,   0,   0 */
#define Magenta         0xF81F      /* 255,   0, 255 */
#define Yellow          0xFFE0      /* 255, 255,   0 */
#define White           0xFFFF      /* 255, 255, 255 */
#define Orange          0xFD20      /* 255, 165,   0 */
#define GreenYellow     0xAFE5      /* 173, 255,  47 */

 class SPI_TFT : public GraphicsDisplay {
 public:

  /** Create a SPI_TFT object connected to SPI and two pins
   *
   * @param mosi,miso,sclk SPI
   * @param cs pin connected to CS of display
   * @param reset pin connected to RESET of display
   *
   */
  SPI_TFT(PinName mosi, PinName miso, PinName sclk, PinName cs, PinName reset,const char* name ="TFT");

  /** Get the width of the screen in pixel
   *
   * @param
   * @returns width of screen in pixel
   *
   */
  virtual int width();

  /** Get the height of the screen in pixel
   *
   * @returns height of screen in pixel
   *
   */
  virtual int height();

  /** Draw a pixel at x,y with color
   *
   * @param x horizontal position
   * @param y vertical position
   * @param color 16 bit pixel color
   */
  virtual void pixel(int x, int y,int colour);

  /** draw a 1 pixel line
   *
   * @param x0,y0 start point
   * @param x1,y1 stop point
   * @param color 16 bit color
   *
   */
  void line(int x0, int y0, int x1, int y1, int colour);

  /** draw a rect
   *
   * @param x0,y0 top left corner
   * @param w,h   width and height
   * @param color 16 bit color
   *                                                   *
   */
  void rect(int x0, int y0, int w, int h, int colour);

  /** draw a filled rect
   *
   * @param x0,y0 top left corner
   * @param w,h   width and height
   * @param color 16 bit color
   *
   */
  void fillrect(int x0, int y0, int w, int h, int colour);

  /** draw an ellipse - source : http://enchantia.com/graphapp/doc/tech/ellipses.html
   *
   * @param xc,yc center point
   * @param a,b semi-major axis and semi-minor axis
   * @param color 16 bit color
   *
   */
  void draw_ellipse(int xc, int yc, int a, int b, unsigned int color);

  /** draw a filled ellipse - source : http://enchantia.com/graphapp/doc/tech/ellipses.html
   *
   * @param xc,yc center point
   * @param a,b semi-major axis and semi-minor axis
   * @param color 16 bit color
   *
   */
  void fill_ellipse(int xc, int yc, int a, int b, unsigned int color);

  /** setup cursor position
   *
   * @param x x-position (top left)
   * @param y y-position
   */
  virtual void locate(int x, int y);

  /** Fill the screen with _backgroun color
   *
   */
  virtual void cls (void);

  /** Read ILI9320 ID
   *
   * @returns LCD ID code
   *
   */
  unsigned short Read_ID(void);

  /** calculate the max number of char in a line
   *
   * @returns max columns
   * depends on actual font size
   *
   */
  virtual int columns(void);

  /** calculate the max number of columns
   *
   * @returns max column
   * depends on actual font size
   *
   */
  virtual int rows(void);

  /** put a char on the screen
   *
   * @param value char to print
   * @returns printed char
   *
   */
  virtual int _putc(int value);

  /** draw a character on given position out of the active font to the TFT
   *
   * @param x x-position of char (top left)
   * @param y y-position
   * @param c char to print
   *
   */
  virtual void character(int x, int y, int c);

  /** paint a bitmap on the TFT
   *
   * @param x,y : upper left corner
   * @param w width of bitmap
   * @param h high of bitmap
   * @param *bitmap pointer to the bitmap data
   *
   *   bitmap format: 16 bit R5 G6 B5
   *
   *   use Gimp to create / load , save as BMP, option 16 bit R5 G6 B5
   *   use winhex to load this file and mark data stating at offset 0x46 to end
   *   use edit -> copy block -> C Source to export C array
   *   paste this array into your program
   *
   *   define the array as static const unsigned char to put it into flash memory
   *   cast the pointer to (unsigned char *) :
   *   tft.Bitmap(10,40,309,50,(unsigned char *)scala);
   */
  void Bitmap(unsigned int x, unsigned int y, unsigned int w, unsigned int h,unsigned char *bitmap);


   /** paint a 16 bit BMP from local filesytem on the TFT (slow)
   *
   * @param x,y : upper left corner
   * @param *Name_BMP name of the BMP file
   * @returns 1 if bmp file was found and painted
   * @returns -1 if bmp file was not found
   * @returns -2 if bmp file is not 16bit
   * @returns -3 if bmp file is to big for screen
   * @returns -4 if buffer malloc go wrong
   *
   *   bitmap format: 16 bit R5 G6 B5
   *
   *   use Gimp to create / load , save as BMP, option 16 bit R5 G6 B5
   *   copy to internal file system
   *
   */

  int BMP_16(unsigned int x, unsigned int y, const char *Name_BMP);



  /** select the font to use
   *
   * @param f pointer to font array
   *
   *   font array can created with GLCD Font Creator from http://www.mikroe.com
   *   you have to add 4 parameter at the beginning of the font array to use:
   *   - the number of byte / char
   *   - the vertial size in pixel
   *   - the horizontal size in pixel
   *   - the number of byte per vertical line
   *   you also have to change the array to char[]
   *
   */
  void set_font(unsigned char* f);

  /** Set the orientation of the screen
   *  x,y: 0,0 is always top left
   *
   * @param o direction to use the screen (0-3) 90� Steps
   *
   */
  void set_orientation(unsigned int o);
  void mod_orientation(void);
  SPI _spi;
  DigitalOut _cs;
  DigitalOut _reset;
  unsigned char* font;


  
// ------------------ PROTECTED PART ------------------
protected:

  /** Set draw window region to whole screen
   *
   */
  void WindowMax (void);


  /** draw a horizontal line
   *
   * @param x0 horizontal start
   * @param x1 horizontal stop
   * @param y vertical position
   * @param color 16 bit color
   *
   */
  void hline(int x0, int x1, int y, int colour);

  /** draw a vertical line
   *
   * @param x horizontal position
   * @param y0 vertical start
   * @param y1 vertical stop
   * @param color 16 bit color
   */
  void vline(int y0, int y1, int x, int colour);

  /** Set draw window region
   *
   * @param x horizontal position
   * @param y vertical position
   * @param w window width in pixel
   * @param h window height in pixels
   */
  virtual void window(int x, int y, int w, int h);


  /** Init the ILI9320 controller
   *
   */
  void tft_reset();

   /** Write data to the LCD controller
   *
   * @param dat data written to LCD controller
   *
   */
  void wr_dat(unsigned short value);

   /** Start data sequence to the LCD controller
   *
   */
  //void wr_dat_start();
  void wr_dat_start(void);

  /** write data only to the LCD controller
   *
   * @param data to be written
   *                                           *
   */
  void wr_dat_only (unsigned short dat);

  /** Write a command the LCD controller
   *
   * @param cmd: command to be written
   *
   */
  void wr_cmd(unsigned char value);

  /** Read data from the LCD controller
   *
   * @returns data from LCD controller
   *
   */
  unsigned short rd_dat(void);

  /** Write a value to the to a LCD register
   *
   * @param reg register to be written
   * @param val data to be written
   */
  void wr_reg (unsigned char reg, unsigned short val);

  /** Read a LCD register
   *
   * @param reg register to be read
   * @returns value of the register
   */
  unsigned short rd_reg (unsigned char reg);

  void SetCursor( unsigned short Xpos, unsigned short Ypos );

  unsigned int orientation;
  unsigned int char_x;
  unsigned int char_y;

};

#endif