When you fork a library and republish it, consider making a pull request. This reduces double libraries on mbed.

Erik’s activity RSS Feed

item Answer posted for Question: How do I change polarity of the SPI data pin on the FRDM K64F: I believe that is the default on the Freescale ones, high output when not used. The clock polarity/phase can be ...
item Answer posted for Question: Timer.read() gives -ve output: This corresponds with the documentation, it returns a signed integer. And I remember an old question where it was stated ...
item Answer posted for Question: Sampling large amounts of data from analogIn and sending it through serial on Nuceleo boards?: How much faster does it need to be? It should be able to go a few times faster simply by ...
item Answer posted for Question: SPI bus not communicating...: SPI does not require pull ups, and if it has the same controller you can use the same library. Do ...
item Answer posted for Question: Is there anything like FastAnalogIn that works with the Nucleo 401 board?: Considering the F401 has an ADC that runs at 4MS/s, I have up till now always assumed that it is ...

Erik’s public repositories

FastPWM Featured
Library that allows for higher resolution and speed than standard mbed PWM library using same syntax (drop-in replacement). pwm, resolution, Speed
Replacement for regular GPIO (DigitalIn, DigitalOut, DigitalInOut) classes which has superior speed. GPIO, Speed
Class to be able to send SPI data with almost no overhead, useful at very high speeds. high, Speed, SPI
Wake-up timer library to wake from deepsleep/power-down KL25z, LPC800-MAX, LPC812, powerdown, Sleep, wake-up
Class similar to InterruptIn which allows the LPC1114 to wake from deepsleep. (For other targets you can use InterruptIn). DeepSleep, InterruptIn, LPC1114
IAP code for Freescale platforms
Class similar to AnalogIn that uses burst mode to run continious background conversions so when the input is read, the last value can immediatly be returned. adc, AnalogIn, burst, fast
Library for reading temperature from DS1820, DS18B20 and DS1822 DS1820, DS1822, DS18B20, one-wire
Inherit from SoftSerial and use software buffers for TX and RX. This allows the SoftSerial to operate in a IRQ driven mode. Overrides most (but not all) stdio functions as ... buffer, BufferedSerial, BufferSerial, Serial, SoftSerial, software
Uses DMA to read/write SPI blocks, while putting the current thread in Wait state. DMA, rtos, SPI
DMA library for the KL25Z DMA, KL25z
Class that combined FATFileSystem with a USBMSD device, similar to LocalFileSystem fatfilesystem, LocalFileSystem, USBMSD
Hello World program for MMA7660 helloworld, MMA7660
Library for the MMA7660 triple axis accelerometer accelerometer, I2C, MMA7660
MODSERIAL with support for more devices Buffered, MODSERIAL, Serial
See all repositories