Diff: TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_port.h

Revision:

89:552587b429a1

Parent:

88:9327015d4013

Child:

90:cb3d968589d8

--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_port.h	Fri Aug 15 15:28:31 2014 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,957 +0,0 @@
-/*
- * Copyright (c) 2014, Freescale Semiconductor, Inc.
- * All rights reserved.
- *
- * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- */
-/*
- * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
- *
- * This file was generated automatically and any changes may be lost.
- */
-#ifndef __HW_PORT_REGISTERS_H__
-#define __HW_PORT_REGISTERS_H__
-
-#include "regs.h"
-
-/*
- * MK64F12 PORT
- *
- * Pin Control and Interrupts
- *
- * Registers defined in this header file:
- * - HW_PORT_PCRn - Pin Control Register n
- * - HW_PORT_GPCLR - Global Pin Control Low Register
- * - HW_PORT_GPCHR - Global Pin Control High Register
- * - HW_PORT_ISFR - Interrupt Status Flag Register
- * - HW_PORT_DFER - Digital Filter Enable Register
- * - HW_PORT_DFCR - Digital Filter Clock Register
- * - HW_PORT_DFWR - Digital Filter Width Register
- *
- * - hw_port_t - Struct containing all module registers.
- */
-
-//! @name Module base addresses
-//@{
-#ifndef REGS_PORT_BASE
-#define HW_PORT_INSTANCE_COUNT (5U) //!< Number of instances of the PORT module.
-#define HW_PORTA (0U) //!< Instance number for PORTA.
-#define HW_PORTB (1U) //!< Instance number for PORTB.
-#define HW_PORTC (2U) //!< Instance number for PORTC.
-#define HW_PORTD (3U) //!< Instance number for PORTD.
-#define HW_PORTE (4U) //!< Instance number for PORTE.
-#define REGS_PORTA_BASE (0x40049000U) //!< Base address for PORTA.
-#define REGS_PORTB_BASE (0x4004A000U) //!< Base address for PORTB.
-#define REGS_PORTC_BASE (0x4004B000U) //!< Base address for PORTC.
-#define REGS_PORTD_BASE (0x4004C000U) //!< Base address for PORTD.
-#define REGS_PORTE_BASE (0x4004D000U) //!< Base address for PORTE.
-
-//! @brief Table of base addresses for PORT instances.
-static const uint32_t __g_regs_PORT_base_addresses[] = {
-        REGS_PORTA_BASE,
-        REGS_PORTB_BASE,
-        REGS_PORTC_BASE,
-        REGS_PORTD_BASE,
-        REGS_PORTE_BASE,
-    };
-
-//! @brief Get the base address of PORT by instance number.
-//! @param x PORT instance number, from 0 through 4.
-#define REGS_PORT_BASE(x) (__g_regs_PORT_base_addresses[(x)])
-
-//! @brief Get the instance number given a base address.
-//! @param b Base address for an instance of PORT.
-#define REGS_PORT_INSTANCE(b) ((b) == REGS_PORTA_BASE ? HW_PORTA : (b) == REGS_PORTB_BASE ? HW_PORTB : (b) == REGS_PORTC_BASE ? HW_PORTC : (b) == REGS_PORTD_BASE ? HW_PORTD : (b) == REGS_PORTE_BASE ? HW_PORTE : 0)
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PORT_PCRn - Pin Control Register n
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PORT_PCRn - Pin Control Register n (RW)
- *
- * Reset value: 0x00000742U
- *
- * See the Signal Multiplexing and Pin Assignment chapter for the reset value of
- * this device. See the GPIO Configuration section for details on the available
- * functions for each pin. Do not modify pin configuration registers associated
- * with pins not available in your selected package. All unbonded pins not
- * available in your package will default to DISABLE state for lowest power consumption.
- */
-typedef union _hw_port_pcrn
-{
-    uint32_t U;
-    struct _hw_port_pcrn_bitfields
-    {
-        uint32_t PS : 1;               //!< [0] Pull Select
-        uint32_t PE : 1;               //!< [1] Pull Enable
-        uint32_t SRE : 1;              //!< [2] Slew Rate Enable
-        uint32_t RESERVED0 : 1;        //!< [3]
-        uint32_t PFE : 1;              //!< [4] Passive Filter Enable
-        uint32_t ODE : 1;              //!< [5] Open Drain Enable
-        uint32_t DSE : 1;              //!< [6] Drive Strength Enable
-        uint32_t RESERVED1 : 1;        //!< [7]
-        uint32_t MUX : 3;              //!< [10:8] Pin Mux Control
-        uint32_t RESERVED2 : 4;        //!< [14:11]
-        uint32_t LK : 1;               //!< [15] Lock Register
-        uint32_t IRQC : 4;             //!< [19:16] Interrupt Configuration
-        uint32_t RESERVED3 : 4;        //!< [23:20]
-        uint32_t ISF : 1;              //!< [24] Interrupt Status Flag
-        uint32_t RESERVED4 : 7;        //!< [31:25]
-    } B;
-} hw_port_pcrn_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PORT_PCRn register
- */
-//@{
-#define HW_PORT_PCRn_COUNT (32U)
-
-#define HW_PORT_PCRn_ADDR(x, n)  (REGS_PORT_BASE(x) + 0x0U + (0x4U * n))
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PORT_PCRn(x, n)       (*(__IO hw_port_pcrn_t *) HW_PORT_PCRn_ADDR(x, n))
-#define HW_PORT_PCRn_RD(x, n)    (HW_PORT_PCRn(x, n).U)
-#define HW_PORT_PCRn_WR(x, n, v) (HW_PORT_PCRn(x, n).U = (v))
-#define HW_PORT_PCRn_SET(x, n, v) (HW_PORT_PCRn_WR(x, n, HW_PORT_PCRn_RD(x, n) |  (v)))
-#define HW_PORT_PCRn_CLR(x, n, v) (HW_PORT_PCRn_WR(x, n, HW_PORT_PCRn_RD(x, n) & ~(v)))
-#define HW_PORT_PCRn_TOG(x, n, v) (HW_PORT_PCRn_WR(x, n, HW_PORT_PCRn_RD(x, n) ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PORT_PCRn bitfields
- */
-
-/*!
- * @name Register PORT_PCRn, field PS[0] (RW)
- *
- * Pull configuration is valid in all digital pin muxing modes.
- *
- * Values:
- * - 0 - Internal pulldown resistor is enabled on the corresponding pin, if the
- *     corresponding PE field is set.
- * - 1 - Internal pullup resistor is enabled on the corresponding pin, if the
- *     corresponding PE field is set.
- */
-//@{
-#define BP_PORT_PCRn_PS      (0U)          //!< Bit position for PORT_PCRn_PS.
-#define BM_PORT_PCRn_PS      (0x00000001U) //!< Bit mask for PORT_PCRn_PS.
-#define BS_PORT_PCRn_PS      (1U)          //!< Bit field size in bits for PORT_PCRn_PS.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_PS field.
-#define BR_PORT_PCRn_PS(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PS))
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_PS.
-#define BF_PORT_PCRn_PS(v)   (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_PS), uint32_t) & BM_PORT_PCRn_PS)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the PS field to a new value.
-#define BW_PORT_PCRn_PS(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PS) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field PE[1] (RW)
- *
- * Pull configuration is valid in all digital pin muxing modes.
- *
- * Values:
- * - 0 - Internal pullup or pulldown resistor is not enabled on the
- *     corresponding pin.
- * - 1 - Internal pullup or pulldown resistor is enabled on the corresponding
- *     pin, if the pin is configured as a digital input.
- */
-//@{
-#define BP_PORT_PCRn_PE      (1U)          //!< Bit position for PORT_PCRn_PE.
-#define BM_PORT_PCRn_PE      (0x00000002U) //!< Bit mask for PORT_PCRn_PE.
-#define BS_PORT_PCRn_PE      (1U)          //!< Bit field size in bits for PORT_PCRn_PE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_PE field.
-#define BR_PORT_PCRn_PE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PE))
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_PE.
-#define BF_PORT_PCRn_PE(v)   (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_PE), uint32_t) & BM_PORT_PCRn_PE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the PE field to a new value.
-#define BW_PORT_PCRn_PE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field SRE[2] (RW)
- *
- * Slew rate configuration is valid in all digital pin muxing modes.
- *
- * Values:
- * - 0 - Fast slew rate is configured on the corresponding pin, if the pin is
- *     configured as a digital output.
- * - 1 - Slow slew rate is configured on the corresponding pin, if the pin is
- *     configured as a digital output.
- */
-//@{
-#define BP_PORT_PCRn_SRE     (2U)          //!< Bit position for PORT_PCRn_SRE.
-#define BM_PORT_PCRn_SRE     (0x00000004U) //!< Bit mask for PORT_PCRn_SRE.
-#define BS_PORT_PCRn_SRE     (1U)          //!< Bit field size in bits for PORT_PCRn_SRE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_SRE field.
-#define BR_PORT_PCRn_SRE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_SRE))
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_SRE.
-#define BF_PORT_PCRn_SRE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_SRE), uint32_t) & BM_PORT_PCRn_SRE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the SRE field to a new value.
-#define BW_PORT_PCRn_SRE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_SRE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field PFE[4] (RW)
- *
- * Passive filter configuration is valid in all digital pin muxing modes.
- *
- * Values:
- * - 0 - Passive input filter is disabled on the corresponding pin.
- * - 1 - Passive input filter is enabled on the corresponding pin, if the pin is
- *     configured as a digital input. Refer to the device data sheet for filter
- *     characteristics.
- */
-//@{
-#define BP_PORT_PCRn_PFE     (4U)          //!< Bit position for PORT_PCRn_PFE.
-#define BM_PORT_PCRn_PFE     (0x00000010U) //!< Bit mask for PORT_PCRn_PFE.
-#define BS_PORT_PCRn_PFE     (1U)          //!< Bit field size in bits for PORT_PCRn_PFE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_PFE field.
-#define BR_PORT_PCRn_PFE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PFE))
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_PFE.
-#define BF_PORT_PCRn_PFE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_PFE), uint32_t) & BM_PORT_PCRn_PFE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the PFE field to a new value.
-#define BW_PORT_PCRn_PFE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_PFE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field ODE[5] (RW)
- *
- * Open drain configuration is valid in all digital pin muxing modes.
- *
- * Values:
- * - 0 - Open drain output is disabled on the corresponding pin.
- * - 1 - Open drain output is enabled on the corresponding pin, if the pin is
- *     configured as a digital output.
- */
-//@{
-#define BP_PORT_PCRn_ODE     (5U)          //!< Bit position for PORT_PCRn_ODE.
-#define BM_PORT_PCRn_ODE     (0x00000020U) //!< Bit mask for PORT_PCRn_ODE.
-#define BS_PORT_PCRn_ODE     (1U)          //!< Bit field size in bits for PORT_PCRn_ODE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_ODE field.
-#define BR_PORT_PCRn_ODE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_ODE))
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_ODE.
-#define BF_PORT_PCRn_ODE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_ODE), uint32_t) & BM_PORT_PCRn_ODE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the ODE field to a new value.
-#define BW_PORT_PCRn_ODE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_ODE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field DSE[6] (RW)
- *
- * Drive strength configuration is valid in all digital pin muxing modes.
- *
- * Values:
- * - 0 - Low drive strength is configured on the corresponding pin, if pin is
- *     configured as a digital output.
- * - 1 - High drive strength is configured on the corresponding pin, if pin is
- *     configured as a digital output.
- */
-//@{
-#define BP_PORT_PCRn_DSE     (6U)          //!< Bit position for PORT_PCRn_DSE.
-#define BM_PORT_PCRn_DSE     (0x00000040U) //!< Bit mask for PORT_PCRn_DSE.
-#define BS_PORT_PCRn_DSE     (1U)          //!< Bit field size in bits for PORT_PCRn_DSE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_DSE field.
-#define BR_PORT_PCRn_DSE(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_DSE))
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_DSE.
-#define BF_PORT_PCRn_DSE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_DSE), uint32_t) & BM_PORT_PCRn_DSE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the DSE field to a new value.
-#define BW_PORT_PCRn_DSE(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_DSE) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field MUX[10:8] (RW)
- *
- * Not all pins support all pin muxing slots. Unimplemented pin muxing slots are
- * reserved and may result in configuring the pin for a different pin muxing
- * slot. The corresponding pin is configured in the following pin muxing slot as
- * follows:
- *
- * Values:
- * - 000 - Pin disabled (analog).
- * - 001 - Alternative 1 (GPIO).
- * - 010 - Alternative 2 (chip-specific).
- * - 011 - Alternative 3 (chip-specific).
- * - 100 - Alternative 4 (chip-specific).
- * - 101 - Alternative 5 (chip-specific).
- * - 110 - Alternative 6 (chip-specific).
- * - 111 - Alternative 7 (chip-specific).
- */
-//@{
-#define BP_PORT_PCRn_MUX     (8U)          //!< Bit position for PORT_PCRn_MUX.
-#define BM_PORT_PCRn_MUX     (0x00000700U) //!< Bit mask for PORT_PCRn_MUX.
-#define BS_PORT_PCRn_MUX     (3U)          //!< Bit field size in bits for PORT_PCRn_MUX.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_MUX field.
-#define BR_PORT_PCRn_MUX(x, n) (HW_PORT_PCRn(x, n).B.MUX)
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_MUX.
-#define BF_PORT_PCRn_MUX(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_MUX), uint32_t) & BM_PORT_PCRn_MUX)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the MUX field to a new value.
-#define BW_PORT_PCRn_MUX(x, n, v) (HW_PORT_PCRn_WR(x, n, (HW_PORT_PCRn_RD(x, n) & ~BM_PORT_PCRn_MUX) | BF_PORT_PCRn_MUX(v)))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field LK[15] (RW)
- *
- * Values:
- * - 0 - Pin Control Register fields [15:0] are not locked.
- * - 1 - Pin Control Register fields [15:0] are locked and cannot be updated
- *     until the next system reset.
- */
-//@{
-#define BP_PORT_PCRn_LK      (15U)         //!< Bit position for PORT_PCRn_LK.
-#define BM_PORT_PCRn_LK      (0x00008000U) //!< Bit mask for PORT_PCRn_LK.
-#define BS_PORT_PCRn_LK      (1U)          //!< Bit field size in bits for PORT_PCRn_LK.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_LK field.
-#define BR_PORT_PCRn_LK(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_LK))
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_LK.
-#define BF_PORT_PCRn_LK(v)   (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_LK), uint32_t) & BM_PORT_PCRn_LK)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the LK field to a new value.
-#define BW_PORT_PCRn_LK(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_LK) = (v))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field IRQC[19:16] (RW)
- *
- * The pin interrupt configuration is valid in all digital pin muxing modes. The
- * corresponding pin is configured to generate interrupt/DMA request as follows:
- *
- * Values:
- * - 0000 - Interrupt/DMA request disabled.
- * - 0001 - DMA request on rising edge.
- * - 0010 - DMA request on falling edge.
- * - 0011 - DMA request on either edge.
- * - 1000 - Interrupt when logic 0.
- * - 1001 - Interrupt on rising-edge.
- * - 1010 - Interrupt on falling-edge.
- * - 1011 - Interrupt on either edge.
- * - 1100 - Interrupt when logic 1.
- */
-//@{
-#define BP_PORT_PCRn_IRQC    (16U)         //!< Bit position for PORT_PCRn_IRQC.
-#define BM_PORT_PCRn_IRQC    (0x000F0000U) //!< Bit mask for PORT_PCRn_IRQC.
-#define BS_PORT_PCRn_IRQC    (4U)          //!< Bit field size in bits for PORT_PCRn_IRQC.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_IRQC field.
-#define BR_PORT_PCRn_IRQC(x, n) (HW_PORT_PCRn(x, n).B.IRQC)
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_IRQC.
-#define BF_PORT_PCRn_IRQC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_IRQC), uint32_t) & BM_PORT_PCRn_IRQC)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the IRQC field to a new value.
-#define BW_PORT_PCRn_IRQC(x, n, v) (HW_PORT_PCRn_WR(x, n, (HW_PORT_PCRn_RD(x, n) & ~BM_PORT_PCRn_IRQC) | BF_PORT_PCRn_IRQC(v)))
-#endif
-//@}
-
-/*!
- * @name Register PORT_PCRn, field ISF[24] (W1C)
- *
- * The pin interrupt configuration is valid in all digital pin muxing modes.
- *
- * Values:
- * - 0 - Configured interrupt is not detected.
- * - 1 - Configured interrupt is detected. If the pin is configured to generate
- *     a DMA request, then the corresponding flag will be cleared automatically
- *     at the completion of the requested DMA transfer. Otherwise, the flag
- *     remains set until a logic 1 is written to the flag. If the pin is configured for
- *     a level sensitive interrupt and the pin remains asserted, then the flag
- *     is set again immediately after it is cleared.
- */
-//@{
-#define BP_PORT_PCRn_ISF     (24U)         //!< Bit position for PORT_PCRn_ISF.
-#define BM_PORT_PCRn_ISF     (0x01000000U) //!< Bit mask for PORT_PCRn_ISF.
-#define BS_PORT_PCRn_ISF     (1U)          //!< Bit field size in bits for PORT_PCRn_ISF.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_PCRn_ISF field.
-#define BR_PORT_PCRn_ISF(x, n) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_ISF))
-#endif
-
-//! @brief Format value for bitfield PORT_PCRn_ISF.
-#define BF_PORT_PCRn_ISF(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_PCRn_ISF), uint32_t) & BM_PORT_PCRn_ISF)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the ISF field to a new value.
-#define BW_PORT_PCRn_ISF(x, n, v) (BITBAND_ACCESS32(HW_PORT_PCRn_ADDR(x, n), BP_PORT_PCRn_ISF) = (v))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PORT_GPCLR - Global Pin Control Low Register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PORT_GPCLR - Global Pin Control Low Register (WORZ)
- *
- * Reset value: 0x00000000U
- *
- * Only 32-bit writes are supported to this register.
- */
-typedef union _hw_port_gpclr
-{
-    uint32_t U;
-    struct _hw_port_gpclr_bitfields
-    {
-        uint32_t GPWD : 16;            //!< [15:0] Global Pin Write Data
-        uint32_t GPWE : 16;            //!< [31:16] Global Pin Write Enable
-    } B;
-} hw_port_gpclr_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PORT_GPCLR register
- */
-//@{
-#define HW_PORT_GPCLR_ADDR(x)    (REGS_PORT_BASE(x) + 0x80U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PORT_GPCLR(x)         (*(__O hw_port_gpclr_t *) HW_PORT_GPCLR_ADDR(x))
-#define HW_PORT_GPCLR_RD(x)      (HW_PORT_GPCLR(x).U)
-#define HW_PORT_GPCLR_WR(x, v)   (HW_PORT_GPCLR(x).U = (v))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PORT_GPCLR bitfields
- */
-
-/*!
- * @name Register PORT_GPCLR, field GPWD[15:0] (WORZ)
- *
- * Write value that is written to all Pin Control Registers bits [15:0] that are
- * selected by GPWE.
- */
-//@{
-#define BP_PORT_GPCLR_GPWD   (0U)          //!< Bit position for PORT_GPCLR_GPWD.
-#define BM_PORT_GPCLR_GPWD   (0x0000FFFFU) //!< Bit mask for PORT_GPCLR_GPWD.
-#define BS_PORT_GPCLR_GPWD   (16U)         //!< Bit field size in bits for PORT_GPCLR_GPWD.
-
-//! @brief Format value for bitfield PORT_GPCLR_GPWD.
-#define BF_PORT_GPCLR_GPWD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_GPCLR_GPWD), uint32_t) & BM_PORT_GPCLR_GPWD)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the GPWD field to a new value.
-#define BW_PORT_GPCLR_GPWD(x, v) (HW_PORT_GPCLR_WR(x, (HW_PORT_GPCLR_RD(x) & ~BM_PORT_GPCLR_GPWD) | BF_PORT_GPCLR_GPWD(v)))
-#endif
-//@}
-
-/*!
- * @name Register PORT_GPCLR, field GPWE[31:16] (WORZ)
- *
- * Selects which Pin Control Registers (15 through 0) bits [15:0] update with
- * the value in GPWD. If a selected Pin Control Register is locked then the write
- * to that register is ignored.
- *
- * Values:
- * - 0 - Corresponding Pin Control Register is not updated with the value in
- *     GPWD.
- * - 1 - Corresponding Pin Control Register is updated with the value in GPWD.
- */
-//@{
-#define BP_PORT_GPCLR_GPWE   (16U)         //!< Bit position for PORT_GPCLR_GPWE.
-#define BM_PORT_GPCLR_GPWE   (0xFFFF0000U) //!< Bit mask for PORT_GPCLR_GPWE.
-#define BS_PORT_GPCLR_GPWE   (16U)         //!< Bit field size in bits for PORT_GPCLR_GPWE.
-
-//! @brief Format value for bitfield PORT_GPCLR_GPWE.
-#define BF_PORT_GPCLR_GPWE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_GPCLR_GPWE), uint32_t) & BM_PORT_GPCLR_GPWE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the GPWE field to a new value.
-#define BW_PORT_GPCLR_GPWE(x, v) (HW_PORT_GPCLR_WR(x, (HW_PORT_GPCLR_RD(x) & ~BM_PORT_GPCLR_GPWE) | BF_PORT_GPCLR_GPWE(v)))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PORT_GPCHR - Global Pin Control High Register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PORT_GPCHR - Global Pin Control High Register (WORZ)
- *
- * Reset value: 0x00000000U
- *
- * Only 32-bit writes are supported to this register.
- */
-typedef union _hw_port_gpchr
-{
-    uint32_t U;
-    struct _hw_port_gpchr_bitfields
-    {
-        uint32_t GPWD : 16;            //!< [15:0] Global Pin Write Data
-        uint32_t GPWE : 16;            //!< [31:16] Global Pin Write Enable
-    } B;
-} hw_port_gpchr_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PORT_GPCHR register
- */
-//@{
-#define HW_PORT_GPCHR_ADDR(x)    (REGS_PORT_BASE(x) + 0x84U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PORT_GPCHR(x)         (*(__O hw_port_gpchr_t *) HW_PORT_GPCHR_ADDR(x))
-#define HW_PORT_GPCHR_RD(x)      (HW_PORT_GPCHR(x).U)
-#define HW_PORT_GPCHR_WR(x, v)   (HW_PORT_GPCHR(x).U = (v))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PORT_GPCHR bitfields
- */
-
-/*!
- * @name Register PORT_GPCHR, field GPWD[15:0] (WORZ)
- *
- * Write value that is written to all Pin Control Registers bits [15:0] that are
- * selected by GPWE.
- */
-//@{
-#define BP_PORT_GPCHR_GPWD   (0U)          //!< Bit position for PORT_GPCHR_GPWD.
-#define BM_PORT_GPCHR_GPWD   (0x0000FFFFU) //!< Bit mask for PORT_GPCHR_GPWD.
-#define BS_PORT_GPCHR_GPWD   (16U)         //!< Bit field size in bits for PORT_GPCHR_GPWD.
-
-//! @brief Format value for bitfield PORT_GPCHR_GPWD.
-#define BF_PORT_GPCHR_GPWD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_GPCHR_GPWD), uint32_t) & BM_PORT_GPCHR_GPWD)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the GPWD field to a new value.
-#define BW_PORT_GPCHR_GPWD(x, v) (HW_PORT_GPCHR_WR(x, (HW_PORT_GPCHR_RD(x) & ~BM_PORT_GPCHR_GPWD) | BF_PORT_GPCHR_GPWD(v)))
-#endif
-//@}
-
-/*!
- * @name Register PORT_GPCHR, field GPWE[31:16] (WORZ)
- *
- * Selects which Pin Control Registers (31 through 16) bits [15:0] update with
- * the value in GPWD. If a selected Pin Control Register is locked then the write
- * to that register is ignored.
- *
- * Values:
- * - 0 - Corresponding Pin Control Register is not updated with the value in
- *     GPWD.
- * - 1 - Corresponding Pin Control Register is updated with the value in GPWD.
- */
-//@{
-#define BP_PORT_GPCHR_GPWE   (16U)         //!< Bit position for PORT_GPCHR_GPWE.
-#define BM_PORT_GPCHR_GPWE   (0xFFFF0000U) //!< Bit mask for PORT_GPCHR_GPWE.
-#define BS_PORT_GPCHR_GPWE   (16U)         //!< Bit field size in bits for PORT_GPCHR_GPWE.
-
-//! @brief Format value for bitfield PORT_GPCHR_GPWE.
-#define BF_PORT_GPCHR_GPWE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_GPCHR_GPWE), uint32_t) & BM_PORT_GPCHR_GPWE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the GPWE field to a new value.
-#define BW_PORT_GPCHR_GPWE(x, v) (HW_PORT_GPCHR_WR(x, (HW_PORT_GPCHR_RD(x) & ~BM_PORT_GPCHR_GPWE) | BF_PORT_GPCHR_GPWE(v)))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PORT_ISFR - Interrupt Status Flag Register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PORT_ISFR - Interrupt Status Flag Register (W1C)
- *
- * Reset value: 0x00000000U
- *
- * The pin interrupt configuration is valid in all digital pin muxing modes. The
- * Interrupt Status Flag for each pin is also visible in the corresponding Pin
- * Control Register, and each flag can be cleared in either location.
- */
-typedef union _hw_port_isfr
-{
-    uint32_t U;
-    struct _hw_port_isfr_bitfields
-    {
-        uint32_t ISF : 32;             //!< [31:0] Interrupt Status Flag
-    } B;
-} hw_port_isfr_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PORT_ISFR register
- */
-//@{
-#define HW_PORT_ISFR_ADDR(x)     (REGS_PORT_BASE(x) + 0xA0U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PORT_ISFR(x)          (*(__IO hw_port_isfr_t *) HW_PORT_ISFR_ADDR(x))
-#define HW_PORT_ISFR_RD(x)       (HW_PORT_ISFR(x).U)
-#define HW_PORT_ISFR_WR(x, v)    (HW_PORT_ISFR(x).U = (v))
-#define HW_PORT_ISFR_SET(x, v)   (HW_PORT_ISFR_WR(x, HW_PORT_ISFR_RD(x) |  (v)))
-#define HW_PORT_ISFR_CLR(x, v)   (HW_PORT_ISFR_WR(x, HW_PORT_ISFR_RD(x) & ~(v)))
-#define HW_PORT_ISFR_TOG(x, v)   (HW_PORT_ISFR_WR(x, HW_PORT_ISFR_RD(x) ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PORT_ISFR bitfields
- */
-
-/*!
- * @name Register PORT_ISFR, field ISF[31:0] (W1C)
- *
- * Each bit in the field indicates the detection of the configured interrupt of
- * the same number as the field.
- *
- * Values:
- * - 0 - Configured interrupt is not detected.
- * - 1 - Configured interrupt is detected. If the pin is configured to generate
- *     a DMA request, then the corresponding flag will be cleared automatically
- *     at the completion of the requested DMA transfer. Otherwise, the flag
- *     remains set until a logic 1 is written to the flag. If the pin is configured for
- *     a level sensitive interrupt and the pin remains asserted, then the flag
- *     is set again immediately after it is cleared.
- */
-//@{
-#define BP_PORT_ISFR_ISF     (0U)          //!< Bit position for PORT_ISFR_ISF.
-#define BM_PORT_ISFR_ISF     (0xFFFFFFFFU) //!< Bit mask for PORT_ISFR_ISF.
-#define BS_PORT_ISFR_ISF     (32U)         //!< Bit field size in bits for PORT_ISFR_ISF.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_ISFR_ISF field.
-#define BR_PORT_ISFR_ISF(x)  (HW_PORT_ISFR(x).U)
-#endif
-
-//! @brief Format value for bitfield PORT_ISFR_ISF.
-#define BF_PORT_ISFR_ISF(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_ISFR_ISF), uint32_t) & BM_PORT_ISFR_ISF)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the ISF field to a new value.
-#define BW_PORT_ISFR_ISF(x, v) (HW_PORT_ISFR_WR(x, v))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PORT_DFER - Digital Filter Enable Register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PORT_DFER - Digital Filter Enable Register (RW)
- *
- * Reset value: 0x00000000U
- *
- * The corresponding bit is read only for pins that do not support a digital
- * filter. Refer to the Chapter of Signal Multiplexing and Signal Descriptions for
- * the pins that support digital filter. The digital filter configuration is valid
- * in all digital pin muxing modes.
- */
-typedef union _hw_port_dfer
-{
-    uint32_t U;
-    struct _hw_port_dfer_bitfields
-    {
-        uint32_t DFE : 32;             //!< [31:0] Digital Filter Enable
-    } B;
-} hw_port_dfer_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PORT_DFER register
- */
-//@{
-#define HW_PORT_DFER_ADDR(x)     (REGS_PORT_BASE(x) + 0xC0U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PORT_DFER(x)          (*(__IO hw_port_dfer_t *) HW_PORT_DFER_ADDR(x))
-#define HW_PORT_DFER_RD(x)       (HW_PORT_DFER(x).U)
-#define HW_PORT_DFER_WR(x, v)    (HW_PORT_DFER(x).U = (v))
-#define HW_PORT_DFER_SET(x, v)   (HW_PORT_DFER_WR(x, HW_PORT_DFER_RD(x) |  (v)))
-#define HW_PORT_DFER_CLR(x, v)   (HW_PORT_DFER_WR(x, HW_PORT_DFER_RD(x) & ~(v)))
-#define HW_PORT_DFER_TOG(x, v)   (HW_PORT_DFER_WR(x, HW_PORT_DFER_RD(x) ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PORT_DFER bitfields
- */
-
-/*!
- * @name Register PORT_DFER, field DFE[31:0] (RW)
- *
- * The digital filter configuration is valid in all digital pin muxing modes.
- * The output of each digital filter is reset to zero at system reset and whenever
- * the digital filter is disabled. Each bit in the field enables the digital
- * filter of the same number as the field.
- *
- * Values:
- * - 0 - Digital filter is disabled on the corresponding pin and output of the
- *     digital filter is reset to zero.
- * - 1 - Digital filter is enabled on the corresponding pin, if the pin is
- *     configured as a digital input.
- */
-//@{
-#define BP_PORT_DFER_DFE     (0U)          //!< Bit position for PORT_DFER_DFE.
-#define BM_PORT_DFER_DFE     (0xFFFFFFFFU) //!< Bit mask for PORT_DFER_DFE.
-#define BS_PORT_DFER_DFE     (32U)         //!< Bit field size in bits for PORT_DFER_DFE.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_DFER_DFE field.
-#define BR_PORT_DFER_DFE(x)  (HW_PORT_DFER(x).U)
-#endif
-
-//! @brief Format value for bitfield PORT_DFER_DFE.
-#define BF_PORT_DFER_DFE(v)  (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_DFER_DFE), uint32_t) & BM_PORT_DFER_DFE)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the DFE field to a new value.
-#define BW_PORT_DFER_DFE(x, v) (HW_PORT_DFER_WR(x, v))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PORT_DFCR - Digital Filter Clock Register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PORT_DFCR - Digital Filter Clock Register (RW)
- *
- * Reset value: 0x00000000U
- *
- * This register is read only for ports that do not support a digital filter.
- * The digital filter configuration is valid in all digital pin muxing modes.
- */
-typedef union _hw_port_dfcr
-{
-    uint32_t U;
-    struct _hw_port_dfcr_bitfields
-    {
-        uint32_t CS : 1;               //!< [0] Clock Source
-        uint32_t RESERVED0 : 31;       //!< [31:1]
-    } B;
-} hw_port_dfcr_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PORT_DFCR register
- */
-//@{
-#define HW_PORT_DFCR_ADDR(x)     (REGS_PORT_BASE(x) + 0xC4U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PORT_DFCR(x)          (*(__IO hw_port_dfcr_t *) HW_PORT_DFCR_ADDR(x))
-#define HW_PORT_DFCR_RD(x)       (HW_PORT_DFCR(x).U)
-#define HW_PORT_DFCR_WR(x, v)    (HW_PORT_DFCR(x).U = (v))
-#define HW_PORT_DFCR_SET(x, v)   (HW_PORT_DFCR_WR(x, HW_PORT_DFCR_RD(x) |  (v)))
-#define HW_PORT_DFCR_CLR(x, v)   (HW_PORT_DFCR_WR(x, HW_PORT_DFCR_RD(x) & ~(v)))
-#define HW_PORT_DFCR_TOG(x, v)   (HW_PORT_DFCR_WR(x, HW_PORT_DFCR_RD(x) ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PORT_DFCR bitfields
- */
-
-/*!
- * @name Register PORT_DFCR, field CS[0] (RW)
- *
- * The digital filter configuration is valid in all digital pin muxing modes.
- * Configures the clock source for the digital input filters. Changing the filter
- * clock source must be done only when all digital filters are disabled.
- *
- * Values:
- * - 0 - Digital filters are clocked by the bus clock.
- * - 1 - Digital filters are clocked by the 1 kHz LPO clock.
- */
-//@{
-#define BP_PORT_DFCR_CS      (0U)          //!< Bit position for PORT_DFCR_CS.
-#define BM_PORT_DFCR_CS      (0x00000001U) //!< Bit mask for PORT_DFCR_CS.
-#define BS_PORT_DFCR_CS      (1U)          //!< Bit field size in bits for PORT_DFCR_CS.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_DFCR_CS field.
-#define BR_PORT_DFCR_CS(x)   (BITBAND_ACCESS32(HW_PORT_DFCR_ADDR(x), BP_PORT_DFCR_CS))
-#endif
-
-//! @brief Format value for bitfield PORT_DFCR_CS.
-#define BF_PORT_DFCR_CS(v)   (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_DFCR_CS), uint32_t) & BM_PORT_DFCR_CS)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the CS field to a new value.
-#define BW_PORT_DFCR_CS(x, v) (BITBAND_ACCESS32(HW_PORT_DFCR_ADDR(x), BP_PORT_DFCR_CS) = (v))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_PORT_DFWR - Digital Filter Width Register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_PORT_DFWR - Digital Filter Width Register (RW)
- *
- * Reset value: 0x00000000U
- *
- * This register is read only for ports that do not support a digital filter.
- * The digital filter configuration is valid in all digital pin muxing modes.
- */
-typedef union _hw_port_dfwr
-{
-    uint32_t U;
-    struct _hw_port_dfwr_bitfields
-    {
-        uint32_t FILT : 5;             //!< [4:0] Filter Length
-        uint32_t RESERVED0 : 27;       //!< [31:5]
-    } B;
-} hw_port_dfwr_t;
-#endif
-
-/*!
- * @name Constants and macros for entire PORT_DFWR register
- */
-//@{
-#define HW_PORT_DFWR_ADDR(x)     (REGS_PORT_BASE(x) + 0xC8U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_PORT_DFWR(x)          (*(__IO hw_port_dfwr_t *) HW_PORT_DFWR_ADDR(x))
-#define HW_PORT_DFWR_RD(x)       (HW_PORT_DFWR(x).U)
-#define HW_PORT_DFWR_WR(x, v)    (HW_PORT_DFWR(x).U = (v))
-#define HW_PORT_DFWR_SET(x, v)   (HW_PORT_DFWR_WR(x, HW_PORT_DFWR_RD(x) |  (v)))
-#define HW_PORT_DFWR_CLR(x, v)   (HW_PORT_DFWR_WR(x, HW_PORT_DFWR_RD(x) & ~(v)))
-#define HW_PORT_DFWR_TOG(x, v)   (HW_PORT_DFWR_WR(x, HW_PORT_DFWR_RD(x) ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual PORT_DFWR bitfields
- */
-
-/*!
- * @name Register PORT_DFWR, field FILT[4:0] (RW)
- *
- * The digital filter configuration is valid in all digital pin muxing modes.
- * Configures the maximum size of the glitches, in clock cycles, that the digital
- * filter absorbs for the enabled digital filters. Glitches that are longer than
- * this register setting will pass through the digital filter, and glitches that
- * are equal to or less than this register setting are filtered. Changing the
- * filter length must be done only after all filters are disabled.
- */
-//@{
-#define BP_PORT_DFWR_FILT    (0U)          //!< Bit position for PORT_DFWR_FILT.
-#define BM_PORT_DFWR_FILT    (0x0000001FU) //!< Bit mask for PORT_DFWR_FILT.
-#define BS_PORT_DFWR_FILT    (5U)          //!< Bit field size in bits for PORT_DFWR_FILT.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the PORT_DFWR_FILT field.
-#define BR_PORT_DFWR_FILT(x) (HW_PORT_DFWR(x).B.FILT)
-#endif
-
-//! @brief Format value for bitfield PORT_DFWR_FILT.
-#define BF_PORT_DFWR_FILT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_PORT_DFWR_FILT), uint32_t) & BM_PORT_DFWR_FILT)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the FILT field to a new value.
-#define BW_PORT_DFWR_FILT(x, v) (HW_PORT_DFWR_WR(x, (HW_PORT_DFWR_RD(x) & ~BM_PORT_DFWR_FILT) | BF_PORT_DFWR_FILT(v)))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// hw_port_t - module struct
-//-------------------------------------------------------------------------------------------
-/*!
- * @brief All PORT module registers.
- */
-#ifndef __LANGUAGE_ASM__
-#pragma pack(1)
-typedef struct _hw_port
-{
-    __IO hw_port_pcrn_t PCRn[32];          //!< [0x0] Pin Control Register n
-    __O hw_port_gpclr_t GPCLR;             //!< [0x80] Global Pin Control Low Register
-    __O hw_port_gpchr_t GPCHR;             //!< [0x84] Global Pin Control High Register
-    uint8_t _reserved0[24];
-    __IO hw_port_isfr_t ISFR;              //!< [0xA0] Interrupt Status Flag Register
-    uint8_t _reserved1[28];
-    __IO hw_port_dfer_t DFER;              //!< [0xC0] Digital Filter Enable Register
-    __IO hw_port_dfcr_t DFCR;              //!< [0xC4] Digital Filter Clock Register
-    __IO hw_port_dfwr_t DFWR;              //!< [0xC8] Digital Filter Width Register
-} hw_port_t;
-#pragma pack()
-
-//! @brief Macro to access all PORT registers.
-//! @param x PORT instance number.
-//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
-//!     use the '&' operator, like <code>&HW_PORT(0)</code>.
-#define HW_PORT(x)     (*(hw_port_t *) REGS_PORT_BASE(x))
-#endif
-
-#endif // __HW_PORT_REGISTERS_H__
-// v22/130726/0.9
-// EOF