Diff: TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_osc.h

Revision:

89:552587b429a1

Parent:

88:9327015d4013

Child:

90:cb3d968589d8

--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_osc.h	Fri Aug 15 15:28:31 2014 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,302 +0,0 @@
-/*
- * Copyright (c) 2014, Freescale Semiconductor, Inc.
- * All rights reserved.
- *
- * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
- * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- * OF SUCH DAMAGE.
- */
-/*
- * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
- *
- * This file was generated automatically and any changes may be lost.
- */
-#ifndef __HW_OSC_REGISTERS_H__
-#define __HW_OSC_REGISTERS_H__
-
-#include "regs.h"
-
-/*
- * MK64F12 OSC
- *
- * Oscillator
- *
- * Registers defined in this header file:
- * - HW_OSC_CR - OSC Control Register
- *
- * - hw_osc_t - Struct containing all module registers.
- */
-
-//! @name Module base addresses
-//@{
-#ifndef REGS_OSC_BASE
-#define HW_OSC_INSTANCE_COUNT (1U) //!< Number of instances of the OSC module.
-#define HW_OSC0 (0U) //!< Instance number for OSC.
-#define REGS_OSC0_BASE (0x40065000U) //!< Base address for OSC.
-
-//! @brief Table of base addresses for OSC instances.
-static const uint32_t __g_regs_OSC_base_addresses[] = {
-        REGS_OSC0_BASE,
-    };
-
-//! @brief Get the base address of OSC by instance number.
-//! @param x OSC instance number, from 0 through 0.
-#define REGS_OSC_BASE(x) (__g_regs_OSC_base_addresses[(x)])
-
-//! @brief Get the instance number given a base address.
-//! @param b Base address for an instance of OSC.
-#define REGS_OSC_INSTANCE(b) ((b) == REGS_OSC0_BASE ? HW_OSC0 : 0)
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// HW_OSC_CR - OSC Control Register
-//-------------------------------------------------------------------------------------------
-
-#ifndef __LANGUAGE_ASM__
-/*!
- * @brief HW_OSC_CR - OSC Control Register (RW)
- *
- * Reset value: 0x00U
- *
- * After OSC is enabled and starts generating the clocks, the configurations
- * such as low power and frequency range, must not be changed.
- */
-typedef union _hw_osc_cr
-{
-    uint8_t U;
-    struct _hw_osc_cr_bitfields
-    {
-        uint8_t SC16P : 1;             //!< [0] Oscillator 16 pF Capacitor Load Configure
-        uint8_t SC8P : 1;              //!< [1] Oscillator 8 pF Capacitor Load Configure
-        uint8_t SC4P : 1;              //!< [2] Oscillator 4 pF Capacitor Load Configure
-        uint8_t SC2P : 1;              //!< [3] Oscillator 2 pF Capacitor Load Configure
-        uint8_t RESERVED0 : 1;         //!< [4]
-        uint8_t EREFSTEN : 1;          //!< [5] External Reference Stop Enable
-        uint8_t RESERVED1 : 1;         //!< [6]
-        uint8_t ERCLKEN : 1;           //!< [7] External Reference Enable
-    } B;
-} hw_osc_cr_t;
-#endif
-
-/*!
- * @name Constants and macros for entire OSC_CR register
- */
-//@{
-#define HW_OSC_CR_ADDR(x)        (REGS_OSC_BASE(x) + 0x0U)
-
-#ifndef __LANGUAGE_ASM__
-#define HW_OSC_CR(x)             (*(__IO hw_osc_cr_t *) HW_OSC_CR_ADDR(x))
-#define HW_OSC_CR_RD(x)          (HW_OSC_CR(x).U)
-#define HW_OSC_CR_WR(x, v)       (HW_OSC_CR(x).U = (v))
-#define HW_OSC_CR_SET(x, v)      (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) |  (v)))
-#define HW_OSC_CR_CLR(x, v)      (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) & ~(v)))
-#define HW_OSC_CR_TOG(x, v)      (HW_OSC_CR_WR(x, HW_OSC_CR_RD(x) ^  (v)))
-#endif
-//@}
-
-/*
- * Constants & macros for individual OSC_CR bitfields
- */
-
-/*!
- * @name Register OSC_CR, field SC16P[0] (RW)
- *
- * Configures the oscillator load.
- *
- * Values:
- * - 0 - Disable the selection.
- * - 1 - Add 16 pF capacitor to the oscillator load.
- */
-//@{
-#define BP_OSC_CR_SC16P      (0U)          //!< Bit position for OSC_CR_SC16P.
-#define BM_OSC_CR_SC16P      (0x01U)       //!< Bit mask for OSC_CR_SC16P.
-#define BS_OSC_CR_SC16P      (1U)          //!< Bit field size in bits for OSC_CR_SC16P.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the OSC_CR_SC16P field.
-#define BR_OSC_CR_SC16P(x)   (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC16P))
-#endif
-
-//! @brief Format value for bitfield OSC_CR_SC16P.
-#define BF_OSC_CR_SC16P(v)   (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_OSC_CR_SC16P), uint8_t) & BM_OSC_CR_SC16P)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the SC16P field to a new value.
-#define BW_OSC_CR_SC16P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC16P) = (v))
-#endif
-//@}
-
-/*!
- * @name Register OSC_CR, field SC8P[1] (RW)
- *
- * Configures the oscillator load.
- *
- * Values:
- * - 0 - Disable the selection.
- * - 1 - Add 8 pF capacitor to the oscillator load.
- */
-//@{
-#define BP_OSC_CR_SC8P       (1U)          //!< Bit position for OSC_CR_SC8P.
-#define BM_OSC_CR_SC8P       (0x02U)       //!< Bit mask for OSC_CR_SC8P.
-#define BS_OSC_CR_SC8P       (1U)          //!< Bit field size in bits for OSC_CR_SC8P.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the OSC_CR_SC8P field.
-#define BR_OSC_CR_SC8P(x)    (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC8P))
-#endif
-
-//! @brief Format value for bitfield OSC_CR_SC8P.
-#define BF_OSC_CR_SC8P(v)    (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_OSC_CR_SC8P), uint8_t) & BM_OSC_CR_SC8P)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the SC8P field to a new value.
-#define BW_OSC_CR_SC8P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC8P) = (v))
-#endif
-//@}
-
-/*!
- * @name Register OSC_CR, field SC4P[2] (RW)
- *
- * Configures the oscillator load.
- *
- * Values:
- * - 0 - Disable the selection.
- * - 1 - Add 4 pF capacitor to the oscillator load.
- */
-//@{
-#define BP_OSC_CR_SC4P       (2U)          //!< Bit position for OSC_CR_SC4P.
-#define BM_OSC_CR_SC4P       (0x04U)       //!< Bit mask for OSC_CR_SC4P.
-#define BS_OSC_CR_SC4P       (1U)          //!< Bit field size in bits for OSC_CR_SC4P.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the OSC_CR_SC4P field.
-#define BR_OSC_CR_SC4P(x)    (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC4P))
-#endif
-
-//! @brief Format value for bitfield OSC_CR_SC4P.
-#define BF_OSC_CR_SC4P(v)    (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_OSC_CR_SC4P), uint8_t) & BM_OSC_CR_SC4P)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the SC4P field to a new value.
-#define BW_OSC_CR_SC4P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC4P) = (v))
-#endif
-//@}
-
-/*!
- * @name Register OSC_CR, field SC2P[3] (RW)
- *
- * Configures the oscillator load.
- *
- * Values:
- * - 0 - Disable the selection.
- * - 1 - Add 2 pF capacitor to the oscillator load.
- */
-//@{
-#define BP_OSC_CR_SC2P       (3U)          //!< Bit position for OSC_CR_SC2P.
-#define BM_OSC_CR_SC2P       (0x08U)       //!< Bit mask for OSC_CR_SC2P.
-#define BS_OSC_CR_SC2P       (1U)          //!< Bit field size in bits for OSC_CR_SC2P.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the OSC_CR_SC2P field.
-#define BR_OSC_CR_SC2P(x)    (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC2P))
-#endif
-
-//! @brief Format value for bitfield OSC_CR_SC2P.
-#define BF_OSC_CR_SC2P(v)    (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_OSC_CR_SC2P), uint8_t) & BM_OSC_CR_SC2P)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the SC2P field to a new value.
-#define BW_OSC_CR_SC2P(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_SC2P) = (v))
-#endif
-//@}
-
-/*!
- * @name Register OSC_CR, field EREFSTEN[5] (RW)
- *
- * Controls whether or not the external reference clock (OSCERCLK) remains
- * enabled when MCU enters Stop mode.
- *
- * Values:
- * - 0 - External reference clock is disabled in Stop mode.
- * - 1 - External reference clock stays enabled in Stop mode if ERCLKEN is set
- *     before entering Stop mode.
- */
-//@{
-#define BP_OSC_CR_EREFSTEN   (5U)          //!< Bit position for OSC_CR_EREFSTEN.
-#define BM_OSC_CR_EREFSTEN   (0x20U)       //!< Bit mask for OSC_CR_EREFSTEN.
-#define BS_OSC_CR_EREFSTEN   (1U)          //!< Bit field size in bits for OSC_CR_EREFSTEN.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the OSC_CR_EREFSTEN field.
-#define BR_OSC_CR_EREFSTEN(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_EREFSTEN))
-#endif
-
-//! @brief Format value for bitfield OSC_CR_EREFSTEN.
-#define BF_OSC_CR_EREFSTEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_OSC_CR_EREFSTEN), uint8_t) & BM_OSC_CR_EREFSTEN)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the EREFSTEN field to a new value.
-#define BW_OSC_CR_EREFSTEN(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_EREFSTEN) = (v))
-#endif
-//@}
-
-/*!
- * @name Register OSC_CR, field ERCLKEN[7] (RW)
- *
- * Enables external reference clock (OSCERCLK).
- *
- * Values:
- * - 0 - External reference clock is inactive.
- * - 1 - External reference clock is enabled.
- */
-//@{
-#define BP_OSC_CR_ERCLKEN    (7U)          //!< Bit position for OSC_CR_ERCLKEN.
-#define BM_OSC_CR_ERCLKEN    (0x80U)       //!< Bit mask for OSC_CR_ERCLKEN.
-#define BS_OSC_CR_ERCLKEN    (1U)          //!< Bit field size in bits for OSC_CR_ERCLKEN.
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Read current value of the OSC_CR_ERCLKEN field.
-#define BR_OSC_CR_ERCLKEN(x) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_ERCLKEN))
-#endif
-
-//! @brief Format value for bitfield OSC_CR_ERCLKEN.
-#define BF_OSC_CR_ERCLKEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_OSC_CR_ERCLKEN), uint8_t) & BM_OSC_CR_ERCLKEN)
-
-#ifndef __LANGUAGE_ASM__
-//! @brief Set the ERCLKEN field to a new value.
-#define BW_OSC_CR_ERCLKEN(x, v) (BITBAND_ACCESS8(HW_OSC_CR_ADDR(x), BP_OSC_CR_ERCLKEN) = (v))
-#endif
-//@}
-
-//-------------------------------------------------------------------------------------------
-// hw_osc_t - module struct
-//-------------------------------------------------------------------------------------------
-/*!
- * @brief All OSC module registers.
- */
-#ifndef __LANGUAGE_ASM__
-#pragma pack(1)
-typedef struct _hw_osc
-{
-    __IO hw_osc_cr_t CR;                   //!< [0x0] OSC Control Register
-} hw_osc_t;
-#pragma pack()
-
-//! @brief Macro to access all OSC registers.
-//! @param x OSC instance number.
-//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
-//!     use the '&' operator, like <code>&HW_OSC(0)</code>.
-#define HW_OSC(x)      (*(hw_osc_t *) REGS_OSC_BASE(x))
-#endif
-
-#endif // __HW_OSC_REGISTERS_H__
-// v22/130726/0.9
-// EOF