mbed library
Fork of mbed by
Diff: TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_dma.h
- Revision:
- 89:552587b429a1
- Parent:
- 88:9327015d4013
- Child:
- 90:cb3d968589d8
--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_dma.h Fri Aug 15 15:28:31 2014 +0100 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,5973 +0,0 @@ -/* - * Copyright (c) 2014, Freescale Semiconductor, Inc. - * All rights reserved. - * - * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - */ -/* - * WARNING! DO NOT EDIT THIS FILE DIRECTLY! - * - * This file was generated automatically and any changes may be lost. - */ -#ifndef __HW_DMA_REGISTERS_H__ -#define __HW_DMA_REGISTERS_H__ - -#include "regs.h" - -/* - * MK64F12 DMA - * - * Enhanced direct memory access controller - * - * Registers defined in this header file: - * - HW_DMA_CR - Control Register - * - HW_DMA_ES - Error Status Register - * - HW_DMA_ERQ - Enable Request Register - * - HW_DMA_EEI - Enable Error Interrupt Register - * - HW_DMA_CEEI - Clear Enable Error Interrupt Register - * - HW_DMA_SEEI - Set Enable Error Interrupt Register - * - HW_DMA_CERQ - Clear Enable Request Register - * - HW_DMA_SERQ - Set Enable Request Register - * - HW_DMA_CDNE - Clear DONE Status Bit Register - * - HW_DMA_SSRT - Set START Bit Register - * - HW_DMA_CERR - Clear Error Register - * - HW_DMA_CINT - Clear Interrupt Request Register - * - HW_DMA_INT - Interrupt Request Register - * - HW_DMA_ERR - Error Register - * - HW_DMA_HRS - Hardware Request Status Register - * - HW_DMA_DCHPRIn - Channel n Priority Register - * - HW_DMA_TCDn_SADDR - TCD Source Address - * - HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset - * - HW_DMA_TCDn_ATTR - TCD Transfer Attributes - * - HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled) - * - HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) - * - HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) - * - HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment - * - HW_DMA_TCDn_DADDR - TCD Destination Address - * - HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset - * - HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) - * - HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) - * - HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address - * - HW_DMA_TCDn_CSR - TCD Control and Status - * - HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) - * - HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) - * - * - hw_dma_t - Struct containing all module registers. - */ - -//! @name Module base addresses -//@{ -#ifndef REGS_DMA_BASE -#define HW_DMA_INSTANCE_COUNT (1U) //!< Number of instances of the DMA module. -#define HW_DMA0 (0U) //!< Instance number for DMA. -#define REGS_DMA0_BASE (0x40008000U) //!< Base address for DMA. - -//! @brief Table of base addresses for DMA instances. -static const uint32_t __g_regs_DMA_base_addresses[] = { - REGS_DMA0_BASE, - }; - -//! @brief Get the base address of DMA by instance number. -//! @param x DMA instance number, from 0 through 0. -#define REGS_DMA_BASE(x) (__g_regs_DMA_base_addresses[(x)]) - -//! @brief Get the instance number given a base address. -//! @param b Base address for an instance of DMA. -#define REGS_DMA_INSTANCE(b) ((b) == REGS_DMA0_BASE ? HW_DMA0 : 0) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_CR - Control Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_CR - Control Register (RW) - * - * Reset value: 0x00000000U - * - * The CR defines the basic operating configuration of the DMA. Arbitration can - * be configured to use either a fixed-priority or a round-robin scheme. For - * fixed-priority arbitration, the highest priority channel requesting service is - * selected to execute. The channel priority registers assign the priorities; see - * the DCHPRIn registers. For round-robin arbitration, the channel priorities are - * ignored and channels are cycled through (from high to low channel number) - * without regard to priority. For correct operation, writes to the CR register must - * be performed only when the DMA channels are inactive; that is, when - * TCDn_CSR[ACTIVE] bits are cleared. Minor loop offsets are address offset values added to - * the final source address (TCDn_SADDR) or destination address (TCDn_DADDR) upon - * minor loop completion. When minor loop offsets are enabled, the minor loop - * offset (MLOFF) is added to the final source address (TCDn_SADDR), to the final - * destination address (TCDn_DADDR), or to both prior to the addresses being - * written back into the TCD. If the major loop is complete, the minor loop offset is - * ignored and the major loop address offsets (TCDn_SLAST and TCDn_DLAST_SGA) are - * used to compute the next TCDn_SADDR and TCDn_DADDR values. When minor loop - * mapping is enabled (EMLM is 1), TCDn word2 is redefined. A portion of TCDn word2 - * is used to specify multiple fields: a source enable bit (SMLOE) to specify - * the minor loop offset should be applied to the source address (TCDn_SADDR) upon - * minor loop completion, a destination enable bit (DMLOE) to specify the minor - * loop offset should be applied to the destination address (TCDn_DADDR) upon - * minor loop completion, and the sign extended minor loop offset value (MLOFF). The - * same offset value (MLOFF) is used for both source and destination minor loop - * offsets. When either minor loop offset is enabled (SMLOE set or DMLOE set), the - * NBYTES field is reduced to 10 bits. When both minor loop offsets are disabled - * (SMLOE cleared and DMLOE cleared), the NBYTES field is a 30-bit vector. When - * minor loop mapping is disabled (EMLM is 0), all 32 bits of TCDn word2 are - * assigned to the NBYTES field. - */ -typedef union _hw_dma_cr -{ - uint32_t U; - struct _hw_dma_cr_bitfields - { - uint32_t RESERVED0 : 1; //!< [0] Reserved. - uint32_t EDBG : 1; //!< [1] Enable Debug - uint32_t ERCA : 1; //!< [2] Enable Round Robin Channel Arbitration - uint32_t RESERVED1 : 1; //!< [3] Reserved. - uint32_t HOE : 1; //!< [4] Halt On Error - uint32_t HALT : 1; //!< [5] Halt DMA Operations - uint32_t CLM : 1; //!< [6] Continuous Link Mode - uint32_t EMLM : 1; //!< [7] Enable Minor Loop Mapping - uint32_t RESERVED2 : 8; //!< [15:8] - uint32_t ECX : 1; //!< [16] Error Cancel Transfer - uint32_t CX : 1; //!< [17] Cancel Transfer - uint32_t RESERVED3 : 14; //!< [31:18] - } B; -} hw_dma_cr_t; -#endif - -/*! - * @name Constants and macros for entire DMA_CR register - */ -//@{ -#define HW_DMA_CR_ADDR(x) (REGS_DMA_BASE(x) + 0x0U) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_CR(x) (*(__IO hw_dma_cr_t *) HW_DMA_CR_ADDR(x)) -#define HW_DMA_CR_RD(x) (HW_DMA_CR(x).U) -#define HW_DMA_CR_WR(x, v) (HW_DMA_CR(x).U = (v)) -#define HW_DMA_CR_SET(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) | (v))) -#define HW_DMA_CR_CLR(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) & ~(v))) -#define HW_DMA_CR_TOG(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_CR bitfields - */ - -/*! - * @name Register DMA_CR, field EDBG[1] (RW) - * - * Values: - * - 0 - When in debug mode, the DMA continues to operate. - * - 1 - When in debug mode, the DMA stalls the start of a new channel. - * Executing channels are allowed to complete. Channel execution resumes when the - * system exits debug mode or the EDBG bit is cleared. - */ -//@{ -#define BP_DMA_CR_EDBG (1U) //!< Bit position for DMA_CR_EDBG. -#define BM_DMA_CR_EDBG (0x00000002U) //!< Bit mask for DMA_CR_EDBG. -#define BS_DMA_CR_EDBG (1U) //!< Bit field size in bits for DMA_CR_EDBG. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_CR_EDBG field. -#define BR_DMA_CR_EDBG(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EDBG)) -#endif - -//! @brief Format value for bitfield DMA_CR_EDBG. -#define BF_DMA_CR_EDBG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_EDBG), uint32_t) & BM_DMA_CR_EDBG) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EDBG field to a new value. -#define BW_DMA_CR_EDBG(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EDBG) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CR, field ERCA[2] (RW) - * - * Values: - * - 0 - Fixed priority arbitration is used for channel selection . - * - 1 - Round robin arbitration is used for channel selection . - */ -//@{ -#define BP_DMA_CR_ERCA (2U) //!< Bit position for DMA_CR_ERCA. -#define BM_DMA_CR_ERCA (0x00000004U) //!< Bit mask for DMA_CR_ERCA. -#define BS_DMA_CR_ERCA (1U) //!< Bit field size in bits for DMA_CR_ERCA. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_CR_ERCA field. -#define BR_DMA_CR_ERCA(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ERCA)) -#endif - -//! @brief Format value for bitfield DMA_CR_ERCA. -#define BF_DMA_CR_ERCA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_ERCA), uint32_t) & BM_DMA_CR_ERCA) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERCA field to a new value. -#define BW_DMA_CR_ERCA(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ERCA) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CR, field HOE[4] (RW) - * - * Values: - * - 0 - Normal operation - * - 1 - Any error causes the HALT bit to set. Subsequently, all service - * requests are ignored until the HALT bit is cleared. - */ -//@{ -#define BP_DMA_CR_HOE (4U) //!< Bit position for DMA_CR_HOE. -#define BM_DMA_CR_HOE (0x00000010U) //!< Bit mask for DMA_CR_HOE. -#define BS_DMA_CR_HOE (1U) //!< Bit field size in bits for DMA_CR_HOE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_CR_HOE field. -#define BR_DMA_CR_HOE(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HOE)) -#endif - -//! @brief Format value for bitfield DMA_CR_HOE. -#define BF_DMA_CR_HOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_HOE), uint32_t) & BM_DMA_CR_HOE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the HOE field to a new value. -#define BW_DMA_CR_HOE(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HOE) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CR, field HALT[5] (RW) - * - * Values: - * - 0 - Normal operation - * - 1 - Stall the start of any new channels. Executing channels are allowed to - * complete. Channel execution resumes when this bit is cleared. - */ -//@{ -#define BP_DMA_CR_HALT (5U) //!< Bit position for DMA_CR_HALT. -#define BM_DMA_CR_HALT (0x00000020U) //!< Bit mask for DMA_CR_HALT. -#define BS_DMA_CR_HALT (1U) //!< Bit field size in bits for DMA_CR_HALT. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_CR_HALT field. -#define BR_DMA_CR_HALT(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HALT)) -#endif - -//! @brief Format value for bitfield DMA_CR_HALT. -#define BF_DMA_CR_HALT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_HALT), uint32_t) & BM_DMA_CR_HALT) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the HALT field to a new value. -#define BW_DMA_CR_HALT(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HALT) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CR, field CLM[6] (RW) - * - * Values: - * - 0 - A minor loop channel link made to itself goes through channel - * arbitration before being activated again. - * - 1 - A minor loop channel link made to itself does not go through channel - * arbitration before being activated again. Upon minor loop completion, the - * channel activates again if that channel has a minor loop channel link - * enabled and the link channel is itself. This effectively applies the minor loop - * offsets and restarts the next minor loop. - */ -//@{ -#define BP_DMA_CR_CLM (6U) //!< Bit position for DMA_CR_CLM. -#define BM_DMA_CR_CLM (0x00000040U) //!< Bit mask for DMA_CR_CLM. -#define BS_DMA_CR_CLM (1U) //!< Bit field size in bits for DMA_CR_CLM. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_CR_CLM field. -#define BR_DMA_CR_CLM(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CLM)) -#endif - -//! @brief Format value for bitfield DMA_CR_CLM. -#define BF_DMA_CR_CLM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_CLM), uint32_t) & BM_DMA_CR_CLM) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CLM field to a new value. -#define BW_DMA_CR_CLM(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CLM) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CR, field EMLM[7] (RW) - * - * Values: - * - 0 - Disabled. TCDn.word2 is defined as a 32-bit NBYTES field. - * - 1 - Enabled. TCDn.word2 is redefined to include individual enable fields, - * an offset field, and the NBYTES field. The individual enable fields allow - * the minor loop offset to be applied to the source address, the destination - * address, or both. The NBYTES field is reduced when either offset is - * enabled. - */ -//@{ -#define BP_DMA_CR_EMLM (7U) //!< Bit position for DMA_CR_EMLM. -#define BM_DMA_CR_EMLM (0x00000080U) //!< Bit mask for DMA_CR_EMLM. -#define BS_DMA_CR_EMLM (1U) //!< Bit field size in bits for DMA_CR_EMLM. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_CR_EMLM field. -#define BR_DMA_CR_EMLM(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EMLM)) -#endif - -//! @brief Format value for bitfield DMA_CR_EMLM. -#define BF_DMA_CR_EMLM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_EMLM), uint32_t) & BM_DMA_CR_EMLM) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EMLM field to a new value. -#define BW_DMA_CR_EMLM(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EMLM) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CR, field ECX[16] (RW) - * - * Values: - * - 0 - Normal operation - * - 1 - Cancel the remaining data transfer in the same fashion as the CX bit. - * Stop the executing channel and force the minor loop to finish. The cancel - * takes effect after the last write of the current read/write sequence. The - * ECX bit clears itself after the cancel is honored. In addition to - * cancelling the transfer, ECX treats the cancel as an error condition, thus updating - * the Error Status register (DMAx_ES) and generating an optional error - * interrupt. - */ -//@{ -#define BP_DMA_CR_ECX (16U) //!< Bit position for DMA_CR_ECX. -#define BM_DMA_CR_ECX (0x00010000U) //!< Bit mask for DMA_CR_ECX. -#define BS_DMA_CR_ECX (1U) //!< Bit field size in bits for DMA_CR_ECX. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_CR_ECX field. -#define BR_DMA_CR_ECX(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ECX)) -#endif - -//! @brief Format value for bitfield DMA_CR_ECX. -#define BF_DMA_CR_ECX(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_ECX), uint32_t) & BM_DMA_CR_ECX) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ECX field to a new value. -#define BW_DMA_CR_ECX(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ECX) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CR, field CX[17] (RW) - * - * Values: - * - 0 - Normal operation - * - 1 - Cancel the remaining data transfer. Stop the executing channel and - * force the minor loop to finish. The cancel takes effect after the last write - * of the current read/write sequence. The CX bit clears itself after the - * cancel has been honored. This cancel retires the channel normally as if the - * minor loop was completed. - */ -//@{ -#define BP_DMA_CR_CX (17U) //!< Bit position for DMA_CR_CX. -#define BM_DMA_CR_CX (0x00020000U) //!< Bit mask for DMA_CR_CX. -#define BS_DMA_CR_CX (1U) //!< Bit field size in bits for DMA_CR_CX. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_CR_CX field. -#define BR_DMA_CR_CX(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CX)) -#endif - -//! @brief Format value for bitfield DMA_CR_CX. -#define BF_DMA_CR_CX(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_CX), uint32_t) & BM_DMA_CR_CX) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CX field to a new value. -#define BW_DMA_CR_CX(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CX) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_ES - Error Status Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_ES - Error Status Register (RO) - * - * Reset value: 0x00000000U - * - * The ES provides information concerning the last recorded channel error. - * Channel errors can be caused by: A configuration error, that is: An illegal setting - * in the transfer-control descriptor, or An illegal priority register setting - * in fixed-arbitration An error termination to a bus master read or write cycle - * See the Error Reporting and Handling section for more details. - */ -typedef union _hw_dma_es -{ - uint32_t U; - struct _hw_dma_es_bitfields - { - uint32_t DBE : 1; //!< [0] Destination Bus Error - uint32_t SBE : 1; //!< [1] Source Bus Error - uint32_t SGE : 1; //!< [2] Scatter/Gather Configuration Error - uint32_t NCE : 1; //!< [3] NBYTES/CITER Configuration Error - uint32_t DOE : 1; //!< [4] Destination Offset Error - uint32_t DAE : 1; //!< [5] Destination Address Error - uint32_t SOE : 1; //!< [6] Source Offset Error - uint32_t SAE : 1; //!< [7] Source Address Error - uint32_t ERRCHN : 4; //!< [11:8] Error Channel Number or Canceled - //! Channel Number - uint32_t RESERVED0 : 2; //!< [13:12] - uint32_t CPE : 1; //!< [14] Channel Priority Error - uint32_t RESERVED1 : 1; //!< [15] - uint32_t ECX : 1; //!< [16] Transfer Canceled - uint32_t RESERVED2 : 14; //!< [30:17] - uint32_t VLD : 1; //!< [31] - } B; -} hw_dma_es_t; -#endif - -/*! - * @name Constants and macros for entire DMA_ES register - */ -//@{ -#define HW_DMA_ES_ADDR(x) (REGS_DMA_BASE(x) + 0x4U) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_ES(x) (*(__I hw_dma_es_t *) HW_DMA_ES_ADDR(x)) -#define HW_DMA_ES_RD(x) (HW_DMA_ES(x).U) -#endif -//@} - -/* - * Constants & macros for individual DMA_ES bitfields - */ - -/*! - * @name Register DMA_ES, field DBE[0] (RO) - * - * Values: - * - 0 - No destination bus error - * - 1 - The last recorded error was a bus error on a destination write - */ -//@{ -#define BP_DMA_ES_DBE (0U) //!< Bit position for DMA_ES_DBE. -#define BM_DMA_ES_DBE (0x00000001U) //!< Bit mask for DMA_ES_DBE. -#define BS_DMA_ES_DBE (1U) //!< Bit field size in bits for DMA_ES_DBE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_DBE field. -#define BR_DMA_ES_DBE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DBE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field SBE[1] (RO) - * - * Values: - * - 0 - No source bus error - * - 1 - The last recorded error was a bus error on a source read - */ -//@{ -#define BP_DMA_ES_SBE (1U) //!< Bit position for DMA_ES_SBE. -#define BM_DMA_ES_SBE (0x00000002U) //!< Bit mask for DMA_ES_SBE. -#define BS_DMA_ES_SBE (1U) //!< Bit field size in bits for DMA_ES_SBE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_SBE field. -#define BR_DMA_ES_SBE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SBE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field SGE[2] (RO) - * - * Values: - * - 0 - No scatter/gather configuration error - * - 1 - The last recorded error was a configuration error detected in the - * TCDn_DLASTSGA field. This field is checked at the beginning of a scatter/gather - * operation after major loop completion if TCDn_CSR[ESG] is enabled. - * TCDn_DLASTSGA is not on a 32 byte boundary. - */ -//@{ -#define BP_DMA_ES_SGE (2U) //!< Bit position for DMA_ES_SGE. -#define BM_DMA_ES_SGE (0x00000004U) //!< Bit mask for DMA_ES_SGE. -#define BS_DMA_ES_SGE (1U) //!< Bit field size in bits for DMA_ES_SGE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_SGE field. -#define BR_DMA_ES_SGE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SGE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field NCE[3] (RO) - * - * Values: - * - 0 - No NBYTES/CITER configuration error - * - 1 - The last recorded error was a configuration error detected in the - * TCDn_NBYTES or TCDn_CITER fields. TCDn_NBYTES is not a multiple of - * TCDn_ATTR[SSIZE] and TCDn_ATTR[DSIZE], or TCDn_CITER[CITER] is equal to zero, or - * TCDn_CITER[ELINK] is not equal to TCDn_BITER[ELINK] - */ -//@{ -#define BP_DMA_ES_NCE (3U) //!< Bit position for DMA_ES_NCE. -#define BM_DMA_ES_NCE (0x00000008U) //!< Bit mask for DMA_ES_NCE. -#define BS_DMA_ES_NCE (1U) //!< Bit field size in bits for DMA_ES_NCE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_NCE field. -#define BR_DMA_ES_NCE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_NCE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field DOE[4] (RO) - * - * Values: - * - 0 - No destination offset configuration error - * - 1 - The last recorded error was a configuration error detected in the - * TCDn_DOFF field. TCDn_DOFF is inconsistent with TCDn_ATTR[DSIZE]. - */ -//@{ -#define BP_DMA_ES_DOE (4U) //!< Bit position for DMA_ES_DOE. -#define BM_DMA_ES_DOE (0x00000010U) //!< Bit mask for DMA_ES_DOE. -#define BS_DMA_ES_DOE (1U) //!< Bit field size in bits for DMA_ES_DOE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_DOE field. -#define BR_DMA_ES_DOE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DOE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field DAE[5] (RO) - * - * Values: - * - 0 - No destination address configuration error - * - 1 - The last recorded error was a configuration error detected in the - * TCDn_DADDR field. TCDn_DADDR is inconsistent with TCDn_ATTR[DSIZE]. - */ -//@{ -#define BP_DMA_ES_DAE (5U) //!< Bit position for DMA_ES_DAE. -#define BM_DMA_ES_DAE (0x00000020U) //!< Bit mask for DMA_ES_DAE. -#define BS_DMA_ES_DAE (1U) //!< Bit field size in bits for DMA_ES_DAE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_DAE field. -#define BR_DMA_ES_DAE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DAE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field SOE[6] (RO) - * - * Values: - * - 0 - No source offset configuration error - * - 1 - The last recorded error was a configuration error detected in the - * TCDn_SOFF field. TCDn_SOFF is inconsistent with TCDn_ATTR[SSIZE]. - */ -//@{ -#define BP_DMA_ES_SOE (6U) //!< Bit position for DMA_ES_SOE. -#define BM_DMA_ES_SOE (0x00000040U) //!< Bit mask for DMA_ES_SOE. -#define BS_DMA_ES_SOE (1U) //!< Bit field size in bits for DMA_ES_SOE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_SOE field. -#define BR_DMA_ES_SOE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SOE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field SAE[7] (RO) - * - * Values: - * - 0 - No source address configuration error. - * - 1 - The last recorded error was a configuration error detected in the - * TCDn_SADDR field. TCDn_SADDR is inconsistent with TCDn_ATTR[SSIZE]. - */ -//@{ -#define BP_DMA_ES_SAE (7U) //!< Bit position for DMA_ES_SAE. -#define BM_DMA_ES_SAE (0x00000080U) //!< Bit mask for DMA_ES_SAE. -#define BS_DMA_ES_SAE (1U) //!< Bit field size in bits for DMA_ES_SAE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_SAE field. -#define BR_DMA_ES_SAE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SAE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field ERRCHN[11:8] (RO) - * - * The channel number of the last recorded error (excluding CPE errors) or last - * recorded error canceled transfer. - */ -//@{ -#define BP_DMA_ES_ERRCHN (8U) //!< Bit position for DMA_ES_ERRCHN. -#define BM_DMA_ES_ERRCHN (0x00000F00U) //!< Bit mask for DMA_ES_ERRCHN. -#define BS_DMA_ES_ERRCHN (4U) //!< Bit field size in bits for DMA_ES_ERRCHN. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_ERRCHN field. -#define BR_DMA_ES_ERRCHN(x) (HW_DMA_ES(x).B.ERRCHN) -#endif -//@} - -/*! - * @name Register DMA_ES, field CPE[14] (RO) - * - * Values: - * - 0 - No channel priority error - * - 1 - The last recorded error was a configuration error in the channel - * priorities . Channel priorities are not unique. - */ -//@{ -#define BP_DMA_ES_CPE (14U) //!< Bit position for DMA_ES_CPE. -#define BM_DMA_ES_CPE (0x00004000U) //!< Bit mask for DMA_ES_CPE. -#define BS_DMA_ES_CPE (1U) //!< Bit field size in bits for DMA_ES_CPE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_CPE field. -#define BR_DMA_ES_CPE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_CPE)) -#endif -//@} - -/*! - * @name Register DMA_ES, field ECX[16] (RO) - * - * Values: - * - 0 - No canceled transfers - * - 1 - The last recorded entry was a canceled transfer by the error cancel - * transfer input - */ -//@{ -#define BP_DMA_ES_ECX (16U) //!< Bit position for DMA_ES_ECX. -#define BM_DMA_ES_ECX (0x00010000U) //!< Bit mask for DMA_ES_ECX. -#define BS_DMA_ES_ECX (1U) //!< Bit field size in bits for DMA_ES_ECX. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_ECX field. -#define BR_DMA_ES_ECX(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_ECX)) -#endif -//@} - -/*! - * @name Register DMA_ES, field VLD[31] (RO) - * - * Logical OR of all ERR status bits - * - * Values: - * - 0 - No ERR bits are set - * - 1 - At least one ERR bit is set indicating a valid error exists that has - * not been cleared - */ -//@{ -#define BP_DMA_ES_VLD (31U) //!< Bit position for DMA_ES_VLD. -#define BM_DMA_ES_VLD (0x80000000U) //!< Bit mask for DMA_ES_VLD. -#define BS_DMA_ES_VLD (1U) //!< Bit field size in bits for DMA_ES_VLD. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ES_VLD field. -#define BR_DMA_ES_VLD(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_VLD)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_ERQ - Enable Request Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_ERQ - Enable Request Register (RW) - * - * Reset value: 0x00000000U - * - * The ERQ register provides a bit map for the 16 implemented channels to enable - * the request signal for each channel. The state of any given channel enable is - * directly affected by writes to this register; it is also affected by writes - * to the SERQ and CERQ. The {S,C}ERQ registers are provided so the request enable - * for a single channel can easily be modified without needing to perform a - * read-modify-write sequence to the ERQ. DMA request input signals and this enable - * request flag must be asserted before a channel's hardware service request is - * accepted. The state of the DMA enable request flag does not affect a channel - * service request made explicitly through software or a linked channel request. - */ -typedef union _hw_dma_erq -{ - uint32_t U; - struct _hw_dma_erq_bitfields - { - uint32_t ERQ0 : 1; //!< [0] Enable DMA Request 0 - uint32_t ERQ1 : 1; //!< [1] Enable DMA Request 1 - uint32_t ERQ2 : 1; //!< [2] Enable DMA Request 2 - uint32_t ERQ3 : 1; //!< [3] Enable DMA Request 3 - uint32_t ERQ4 : 1; //!< [4] Enable DMA Request 4 - uint32_t ERQ5 : 1; //!< [5] Enable DMA Request 5 - uint32_t ERQ6 : 1; //!< [6] Enable DMA Request 6 - uint32_t ERQ7 : 1; //!< [7] Enable DMA Request 7 - uint32_t ERQ8 : 1; //!< [8] Enable DMA Request 8 - uint32_t ERQ9 : 1; //!< [9] Enable DMA Request 9 - uint32_t ERQ10 : 1; //!< [10] Enable DMA Request 10 - uint32_t ERQ11 : 1; //!< [11] Enable DMA Request 11 - uint32_t ERQ12 : 1; //!< [12] Enable DMA Request 12 - uint32_t ERQ13 : 1; //!< [13] Enable DMA Request 13 - uint32_t ERQ14 : 1; //!< [14] Enable DMA Request 14 - uint32_t ERQ15 : 1; //!< [15] Enable DMA Request 15 - uint32_t RESERVED0 : 16; //!< [31:16] - } B; -} hw_dma_erq_t; -#endif - -/*! - * @name Constants and macros for entire DMA_ERQ register - */ -//@{ -#define HW_DMA_ERQ_ADDR(x) (REGS_DMA_BASE(x) + 0xCU) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_ERQ(x) (*(__IO hw_dma_erq_t *) HW_DMA_ERQ_ADDR(x)) -#define HW_DMA_ERQ_RD(x) (HW_DMA_ERQ(x).U) -#define HW_DMA_ERQ_WR(x, v) (HW_DMA_ERQ(x).U = (v)) -#define HW_DMA_ERQ_SET(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) | (v))) -#define HW_DMA_ERQ_CLR(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) & ~(v))) -#define HW_DMA_ERQ_TOG(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_ERQ bitfields - */ - -/*! - * @name Register DMA_ERQ, field ERQ0[0] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ0 (0U) //!< Bit position for DMA_ERQ_ERQ0. -#define BM_DMA_ERQ_ERQ0 (0x00000001U) //!< Bit mask for DMA_ERQ_ERQ0. -#define BS_DMA_ERQ_ERQ0 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ0. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ0 field. -#define BR_DMA_ERQ_ERQ0(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ0)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ0. -#define BF_DMA_ERQ_ERQ0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ0), uint32_t) & BM_DMA_ERQ_ERQ0) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ0 field to a new value. -#define BW_DMA_ERQ_ERQ0(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ0) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ1[1] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ1 (1U) //!< Bit position for DMA_ERQ_ERQ1. -#define BM_DMA_ERQ_ERQ1 (0x00000002U) //!< Bit mask for DMA_ERQ_ERQ1. -#define BS_DMA_ERQ_ERQ1 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ1. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ1 field. -#define BR_DMA_ERQ_ERQ1(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ1)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ1. -#define BF_DMA_ERQ_ERQ1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ1), uint32_t) & BM_DMA_ERQ_ERQ1) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ1 field to a new value. -#define BW_DMA_ERQ_ERQ1(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ1) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ2[2] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ2 (2U) //!< Bit position for DMA_ERQ_ERQ2. -#define BM_DMA_ERQ_ERQ2 (0x00000004U) //!< Bit mask for DMA_ERQ_ERQ2. -#define BS_DMA_ERQ_ERQ2 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ2. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ2 field. -#define BR_DMA_ERQ_ERQ2(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ2)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ2. -#define BF_DMA_ERQ_ERQ2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ2), uint32_t) & BM_DMA_ERQ_ERQ2) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ2 field to a new value. -#define BW_DMA_ERQ_ERQ2(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ2) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ3[3] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ3 (3U) //!< Bit position for DMA_ERQ_ERQ3. -#define BM_DMA_ERQ_ERQ3 (0x00000008U) //!< Bit mask for DMA_ERQ_ERQ3. -#define BS_DMA_ERQ_ERQ3 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ3. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ3 field. -#define BR_DMA_ERQ_ERQ3(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ3)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ3. -#define BF_DMA_ERQ_ERQ3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ3), uint32_t) & BM_DMA_ERQ_ERQ3) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ3 field to a new value. -#define BW_DMA_ERQ_ERQ3(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ3) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ4[4] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ4 (4U) //!< Bit position for DMA_ERQ_ERQ4. -#define BM_DMA_ERQ_ERQ4 (0x00000010U) //!< Bit mask for DMA_ERQ_ERQ4. -#define BS_DMA_ERQ_ERQ4 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ4. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ4 field. -#define BR_DMA_ERQ_ERQ4(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ4)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ4. -#define BF_DMA_ERQ_ERQ4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ4), uint32_t) & BM_DMA_ERQ_ERQ4) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ4 field to a new value. -#define BW_DMA_ERQ_ERQ4(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ4) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ5[5] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ5 (5U) //!< Bit position for DMA_ERQ_ERQ5. -#define BM_DMA_ERQ_ERQ5 (0x00000020U) //!< Bit mask for DMA_ERQ_ERQ5. -#define BS_DMA_ERQ_ERQ5 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ5. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ5 field. -#define BR_DMA_ERQ_ERQ5(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ5)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ5. -#define BF_DMA_ERQ_ERQ5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ5), uint32_t) & BM_DMA_ERQ_ERQ5) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ5 field to a new value. -#define BW_DMA_ERQ_ERQ5(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ5) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ6[6] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ6 (6U) //!< Bit position for DMA_ERQ_ERQ6. -#define BM_DMA_ERQ_ERQ6 (0x00000040U) //!< Bit mask for DMA_ERQ_ERQ6. -#define BS_DMA_ERQ_ERQ6 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ6. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ6 field. -#define BR_DMA_ERQ_ERQ6(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ6)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ6. -#define BF_DMA_ERQ_ERQ6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ6), uint32_t) & BM_DMA_ERQ_ERQ6) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ6 field to a new value. -#define BW_DMA_ERQ_ERQ6(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ6) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ7[7] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ7 (7U) //!< Bit position for DMA_ERQ_ERQ7. -#define BM_DMA_ERQ_ERQ7 (0x00000080U) //!< Bit mask for DMA_ERQ_ERQ7. -#define BS_DMA_ERQ_ERQ7 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ7. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ7 field. -#define BR_DMA_ERQ_ERQ7(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ7)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ7. -#define BF_DMA_ERQ_ERQ7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ7), uint32_t) & BM_DMA_ERQ_ERQ7) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ7 field to a new value. -#define BW_DMA_ERQ_ERQ7(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ7) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ8[8] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ8 (8U) //!< Bit position for DMA_ERQ_ERQ8. -#define BM_DMA_ERQ_ERQ8 (0x00000100U) //!< Bit mask for DMA_ERQ_ERQ8. -#define BS_DMA_ERQ_ERQ8 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ8. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ8 field. -#define BR_DMA_ERQ_ERQ8(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ8)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ8. -#define BF_DMA_ERQ_ERQ8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ8), uint32_t) & BM_DMA_ERQ_ERQ8) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ8 field to a new value. -#define BW_DMA_ERQ_ERQ8(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ8) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ9[9] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ9 (9U) //!< Bit position for DMA_ERQ_ERQ9. -#define BM_DMA_ERQ_ERQ9 (0x00000200U) //!< Bit mask for DMA_ERQ_ERQ9. -#define BS_DMA_ERQ_ERQ9 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ9. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ9 field. -#define BR_DMA_ERQ_ERQ9(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ9)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ9. -#define BF_DMA_ERQ_ERQ9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ9), uint32_t) & BM_DMA_ERQ_ERQ9) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ9 field to a new value. -#define BW_DMA_ERQ_ERQ9(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ9) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ10[10] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ10 (10U) //!< Bit position for DMA_ERQ_ERQ10. -#define BM_DMA_ERQ_ERQ10 (0x00000400U) //!< Bit mask for DMA_ERQ_ERQ10. -#define BS_DMA_ERQ_ERQ10 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ10. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ10 field. -#define BR_DMA_ERQ_ERQ10(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ10)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ10. -#define BF_DMA_ERQ_ERQ10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ10), uint32_t) & BM_DMA_ERQ_ERQ10) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ10 field to a new value. -#define BW_DMA_ERQ_ERQ10(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ10) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ11[11] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ11 (11U) //!< Bit position for DMA_ERQ_ERQ11. -#define BM_DMA_ERQ_ERQ11 (0x00000800U) //!< Bit mask for DMA_ERQ_ERQ11. -#define BS_DMA_ERQ_ERQ11 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ11. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ11 field. -#define BR_DMA_ERQ_ERQ11(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ11)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ11. -#define BF_DMA_ERQ_ERQ11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ11), uint32_t) & BM_DMA_ERQ_ERQ11) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ11 field to a new value. -#define BW_DMA_ERQ_ERQ11(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ11) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ12[12] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ12 (12U) //!< Bit position for DMA_ERQ_ERQ12. -#define BM_DMA_ERQ_ERQ12 (0x00001000U) //!< Bit mask for DMA_ERQ_ERQ12. -#define BS_DMA_ERQ_ERQ12 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ12. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ12 field. -#define BR_DMA_ERQ_ERQ12(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ12)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ12. -#define BF_DMA_ERQ_ERQ12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ12), uint32_t) & BM_DMA_ERQ_ERQ12) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ12 field to a new value. -#define BW_DMA_ERQ_ERQ12(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ12) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ13[13] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ13 (13U) //!< Bit position for DMA_ERQ_ERQ13. -#define BM_DMA_ERQ_ERQ13 (0x00002000U) //!< Bit mask for DMA_ERQ_ERQ13. -#define BS_DMA_ERQ_ERQ13 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ13. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ13 field. -#define BR_DMA_ERQ_ERQ13(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ13)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ13. -#define BF_DMA_ERQ_ERQ13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ13), uint32_t) & BM_DMA_ERQ_ERQ13) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ13 field to a new value. -#define BW_DMA_ERQ_ERQ13(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ13) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ14[14] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ14 (14U) //!< Bit position for DMA_ERQ_ERQ14. -#define BM_DMA_ERQ_ERQ14 (0x00004000U) //!< Bit mask for DMA_ERQ_ERQ14. -#define BS_DMA_ERQ_ERQ14 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ14. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ14 field. -#define BR_DMA_ERQ_ERQ14(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ14)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ14. -#define BF_DMA_ERQ_ERQ14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ14), uint32_t) & BM_DMA_ERQ_ERQ14) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ14 field to a new value. -#define BW_DMA_ERQ_ERQ14(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ14) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERQ, field ERQ15[15] (RW) - * - * Values: - * - 0 - The DMA request signal for the corresponding channel is disabled - * - 1 - The DMA request signal for the corresponding channel is enabled - */ -//@{ -#define BP_DMA_ERQ_ERQ15 (15U) //!< Bit position for DMA_ERQ_ERQ15. -#define BM_DMA_ERQ_ERQ15 (0x00008000U) //!< Bit mask for DMA_ERQ_ERQ15. -#define BS_DMA_ERQ_ERQ15 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ15. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERQ_ERQ15 field. -#define BR_DMA_ERQ_ERQ15(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ15)) -#endif - -//! @brief Format value for bitfield DMA_ERQ_ERQ15. -#define BF_DMA_ERQ_ERQ15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ15), uint32_t) & BM_DMA_ERQ_ERQ15) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERQ15 field to a new value. -#define BW_DMA_ERQ_ERQ15(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ15) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_EEI - Enable Error Interrupt Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_EEI - Enable Error Interrupt Register (RW) - * - * Reset value: 0x00000000U - * - * The EEI register provides a bit map for the 16 channels to enable the error - * interrupt signal for each channel. The state of any given channel's error - * interrupt enable is directly affected by writes to this register; it is also - * affected by writes to the SEEI and CEEI. The {S,C}EEI are provided so the error - * interrupt enable for a single channel can easily be modified without the need to - * perform a read-modify-write sequence to the EEI register. The DMA error - * indicator and the error interrupt enable flag must be asserted before an error - * interrupt request for a given channel is asserted to the interrupt controller. - */ -typedef union _hw_dma_eei -{ - uint32_t U; - struct _hw_dma_eei_bitfields - { - uint32_t EEI0 : 1; //!< [0] Enable Error Interrupt 0 - uint32_t EEI1 : 1; //!< [1] Enable Error Interrupt 1 - uint32_t EEI2 : 1; //!< [2] Enable Error Interrupt 2 - uint32_t EEI3 : 1; //!< [3] Enable Error Interrupt 3 - uint32_t EEI4 : 1; //!< [4] Enable Error Interrupt 4 - uint32_t EEI5 : 1; //!< [5] Enable Error Interrupt 5 - uint32_t EEI6 : 1; //!< [6] Enable Error Interrupt 6 - uint32_t EEI7 : 1; //!< [7] Enable Error Interrupt 7 - uint32_t EEI8 : 1; //!< [8] Enable Error Interrupt 8 - uint32_t EEI9 : 1; //!< [9] Enable Error Interrupt 9 - uint32_t EEI10 : 1; //!< [10] Enable Error Interrupt 10 - uint32_t EEI11 : 1; //!< [11] Enable Error Interrupt 11 - uint32_t EEI12 : 1; //!< [12] Enable Error Interrupt 12 - uint32_t EEI13 : 1; //!< [13] Enable Error Interrupt 13 - uint32_t EEI14 : 1; //!< [14] Enable Error Interrupt 14 - uint32_t EEI15 : 1; //!< [15] Enable Error Interrupt 15 - uint32_t RESERVED0 : 16; //!< [31:16] - } B; -} hw_dma_eei_t; -#endif - -/*! - * @name Constants and macros for entire DMA_EEI register - */ -//@{ -#define HW_DMA_EEI_ADDR(x) (REGS_DMA_BASE(x) + 0x14U) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_EEI(x) (*(__IO hw_dma_eei_t *) HW_DMA_EEI_ADDR(x)) -#define HW_DMA_EEI_RD(x) (HW_DMA_EEI(x).U) -#define HW_DMA_EEI_WR(x, v) (HW_DMA_EEI(x).U = (v)) -#define HW_DMA_EEI_SET(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) | (v))) -#define HW_DMA_EEI_CLR(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) & ~(v))) -#define HW_DMA_EEI_TOG(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_EEI bitfields - */ - -/*! - * @name Register DMA_EEI, field EEI0[0] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI0 (0U) //!< Bit position for DMA_EEI_EEI0. -#define BM_DMA_EEI_EEI0 (0x00000001U) //!< Bit mask for DMA_EEI_EEI0. -#define BS_DMA_EEI_EEI0 (1U) //!< Bit field size in bits for DMA_EEI_EEI0. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI0 field. -#define BR_DMA_EEI_EEI0(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI0)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI0. -#define BF_DMA_EEI_EEI0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI0), uint32_t) & BM_DMA_EEI_EEI0) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI0 field to a new value. -#define BW_DMA_EEI_EEI0(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI0) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI1[1] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI1 (1U) //!< Bit position for DMA_EEI_EEI1. -#define BM_DMA_EEI_EEI1 (0x00000002U) //!< Bit mask for DMA_EEI_EEI1. -#define BS_DMA_EEI_EEI1 (1U) //!< Bit field size in bits for DMA_EEI_EEI1. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI1 field. -#define BR_DMA_EEI_EEI1(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI1)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI1. -#define BF_DMA_EEI_EEI1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI1), uint32_t) & BM_DMA_EEI_EEI1) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI1 field to a new value. -#define BW_DMA_EEI_EEI1(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI1) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI2[2] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI2 (2U) //!< Bit position for DMA_EEI_EEI2. -#define BM_DMA_EEI_EEI2 (0x00000004U) //!< Bit mask for DMA_EEI_EEI2. -#define BS_DMA_EEI_EEI2 (1U) //!< Bit field size in bits for DMA_EEI_EEI2. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI2 field. -#define BR_DMA_EEI_EEI2(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI2)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI2. -#define BF_DMA_EEI_EEI2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI2), uint32_t) & BM_DMA_EEI_EEI2) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI2 field to a new value. -#define BW_DMA_EEI_EEI2(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI2) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI3[3] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI3 (3U) //!< Bit position for DMA_EEI_EEI3. -#define BM_DMA_EEI_EEI3 (0x00000008U) //!< Bit mask for DMA_EEI_EEI3. -#define BS_DMA_EEI_EEI3 (1U) //!< Bit field size in bits for DMA_EEI_EEI3. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI3 field. -#define BR_DMA_EEI_EEI3(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI3)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI3. -#define BF_DMA_EEI_EEI3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI3), uint32_t) & BM_DMA_EEI_EEI3) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI3 field to a new value. -#define BW_DMA_EEI_EEI3(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI3) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI4[4] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI4 (4U) //!< Bit position for DMA_EEI_EEI4. -#define BM_DMA_EEI_EEI4 (0x00000010U) //!< Bit mask for DMA_EEI_EEI4. -#define BS_DMA_EEI_EEI4 (1U) //!< Bit field size in bits for DMA_EEI_EEI4. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI4 field. -#define BR_DMA_EEI_EEI4(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI4)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI4. -#define BF_DMA_EEI_EEI4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI4), uint32_t) & BM_DMA_EEI_EEI4) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI4 field to a new value. -#define BW_DMA_EEI_EEI4(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI4) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI5[5] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI5 (5U) //!< Bit position for DMA_EEI_EEI5. -#define BM_DMA_EEI_EEI5 (0x00000020U) //!< Bit mask for DMA_EEI_EEI5. -#define BS_DMA_EEI_EEI5 (1U) //!< Bit field size in bits for DMA_EEI_EEI5. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI5 field. -#define BR_DMA_EEI_EEI5(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI5)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI5. -#define BF_DMA_EEI_EEI5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI5), uint32_t) & BM_DMA_EEI_EEI5) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI5 field to a new value. -#define BW_DMA_EEI_EEI5(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI5) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI6[6] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI6 (6U) //!< Bit position for DMA_EEI_EEI6. -#define BM_DMA_EEI_EEI6 (0x00000040U) //!< Bit mask for DMA_EEI_EEI6. -#define BS_DMA_EEI_EEI6 (1U) //!< Bit field size in bits for DMA_EEI_EEI6. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI6 field. -#define BR_DMA_EEI_EEI6(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI6)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI6. -#define BF_DMA_EEI_EEI6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI6), uint32_t) & BM_DMA_EEI_EEI6) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI6 field to a new value. -#define BW_DMA_EEI_EEI6(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI6) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI7[7] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI7 (7U) //!< Bit position for DMA_EEI_EEI7. -#define BM_DMA_EEI_EEI7 (0x00000080U) //!< Bit mask for DMA_EEI_EEI7. -#define BS_DMA_EEI_EEI7 (1U) //!< Bit field size in bits for DMA_EEI_EEI7. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI7 field. -#define BR_DMA_EEI_EEI7(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI7)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI7. -#define BF_DMA_EEI_EEI7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI7), uint32_t) & BM_DMA_EEI_EEI7) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI7 field to a new value. -#define BW_DMA_EEI_EEI7(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI7) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI8[8] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI8 (8U) //!< Bit position for DMA_EEI_EEI8. -#define BM_DMA_EEI_EEI8 (0x00000100U) //!< Bit mask for DMA_EEI_EEI8. -#define BS_DMA_EEI_EEI8 (1U) //!< Bit field size in bits for DMA_EEI_EEI8. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI8 field. -#define BR_DMA_EEI_EEI8(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI8)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI8. -#define BF_DMA_EEI_EEI8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI8), uint32_t) & BM_DMA_EEI_EEI8) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI8 field to a new value. -#define BW_DMA_EEI_EEI8(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI8) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI9[9] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI9 (9U) //!< Bit position for DMA_EEI_EEI9. -#define BM_DMA_EEI_EEI9 (0x00000200U) //!< Bit mask for DMA_EEI_EEI9. -#define BS_DMA_EEI_EEI9 (1U) //!< Bit field size in bits for DMA_EEI_EEI9. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI9 field. -#define BR_DMA_EEI_EEI9(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI9)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI9. -#define BF_DMA_EEI_EEI9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI9), uint32_t) & BM_DMA_EEI_EEI9) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI9 field to a new value. -#define BW_DMA_EEI_EEI9(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI9) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI10[10] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI10 (10U) //!< Bit position for DMA_EEI_EEI10. -#define BM_DMA_EEI_EEI10 (0x00000400U) //!< Bit mask for DMA_EEI_EEI10. -#define BS_DMA_EEI_EEI10 (1U) //!< Bit field size in bits for DMA_EEI_EEI10. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI10 field. -#define BR_DMA_EEI_EEI10(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI10)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI10. -#define BF_DMA_EEI_EEI10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI10), uint32_t) & BM_DMA_EEI_EEI10) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI10 field to a new value. -#define BW_DMA_EEI_EEI10(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI10) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI11[11] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI11 (11U) //!< Bit position for DMA_EEI_EEI11. -#define BM_DMA_EEI_EEI11 (0x00000800U) //!< Bit mask for DMA_EEI_EEI11. -#define BS_DMA_EEI_EEI11 (1U) //!< Bit field size in bits for DMA_EEI_EEI11. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI11 field. -#define BR_DMA_EEI_EEI11(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI11)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI11. -#define BF_DMA_EEI_EEI11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI11), uint32_t) & BM_DMA_EEI_EEI11) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI11 field to a new value. -#define BW_DMA_EEI_EEI11(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI11) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI12[12] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI12 (12U) //!< Bit position for DMA_EEI_EEI12. -#define BM_DMA_EEI_EEI12 (0x00001000U) //!< Bit mask for DMA_EEI_EEI12. -#define BS_DMA_EEI_EEI12 (1U) //!< Bit field size in bits for DMA_EEI_EEI12. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI12 field. -#define BR_DMA_EEI_EEI12(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI12)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI12. -#define BF_DMA_EEI_EEI12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI12), uint32_t) & BM_DMA_EEI_EEI12) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI12 field to a new value. -#define BW_DMA_EEI_EEI12(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI12) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI13[13] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI13 (13U) //!< Bit position for DMA_EEI_EEI13. -#define BM_DMA_EEI_EEI13 (0x00002000U) //!< Bit mask for DMA_EEI_EEI13. -#define BS_DMA_EEI_EEI13 (1U) //!< Bit field size in bits for DMA_EEI_EEI13. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI13 field. -#define BR_DMA_EEI_EEI13(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI13)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI13. -#define BF_DMA_EEI_EEI13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI13), uint32_t) & BM_DMA_EEI_EEI13) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI13 field to a new value. -#define BW_DMA_EEI_EEI13(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI13) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI14[14] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI14 (14U) //!< Bit position for DMA_EEI_EEI14. -#define BM_DMA_EEI_EEI14 (0x00004000U) //!< Bit mask for DMA_EEI_EEI14. -#define BS_DMA_EEI_EEI14 (1U) //!< Bit field size in bits for DMA_EEI_EEI14. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI14 field. -#define BR_DMA_EEI_EEI14(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI14)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI14. -#define BF_DMA_EEI_EEI14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI14), uint32_t) & BM_DMA_EEI_EEI14) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI14 field to a new value. -#define BW_DMA_EEI_EEI14(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI14) = (v)) -#endif -//@} - -/*! - * @name Register DMA_EEI, field EEI15[15] (RW) - * - * Values: - * - 0 - The error signal for corresponding channel does not generate an error - * interrupt - * - 1 - The assertion of the error signal for corresponding channel generates - * an error interrupt request - */ -//@{ -#define BP_DMA_EEI_EEI15 (15U) //!< Bit position for DMA_EEI_EEI15. -#define BM_DMA_EEI_EEI15 (0x00008000U) //!< Bit mask for DMA_EEI_EEI15. -#define BS_DMA_EEI_EEI15 (1U) //!< Bit field size in bits for DMA_EEI_EEI15. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_EEI_EEI15 field. -#define BR_DMA_EEI_EEI15(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI15)) -#endif - -//! @brief Format value for bitfield DMA_EEI_EEI15. -#define BF_DMA_EEI_EEI15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI15), uint32_t) & BM_DMA_EEI_EEI15) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the EEI15 field to a new value. -#define BW_DMA_EEI_EEI15(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI15) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_CEEI - Clear Enable Error Interrupt Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_CEEI - Clear Enable Error Interrupt Register (WO) - * - * Reset value: 0x00U - * - * The CEEI provides a simple memory-mapped mechanism to clear a given bit in - * the EEI to disable the error interrupt for a given channel. The data value on a - * register write causes the corresponding bit in the EEI to be cleared. Setting - * the CAEE bit provides a global clear function, forcing the EEI contents to be - * cleared, disabling all DMA request inputs. If the NOP bit is set, the command - * is ignored. This allows you to write multiple-byte registers as a 32-bit word. - * Reads of this register return all zeroes. - */ -typedef union _hw_dma_ceei -{ - uint8_t U; - struct _hw_dma_ceei_bitfields - { - uint8_t CEEI : 4; //!< [3:0] Clear Enable Error Interrupt - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t CAEE : 1; //!< [6] Clear All Enable Error Interrupts - uint8_t NOP : 1; //!< [7] No Op enable - } B; -} hw_dma_ceei_t; -#endif - -/*! - * @name Constants and macros for entire DMA_CEEI register - */ -//@{ -#define HW_DMA_CEEI_ADDR(x) (REGS_DMA_BASE(x) + 0x18U) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_CEEI(x) (*(__O hw_dma_ceei_t *) HW_DMA_CEEI_ADDR(x)) -#define HW_DMA_CEEI_RD(x) (HW_DMA_CEEI(x).U) -#define HW_DMA_CEEI_WR(x, v) (HW_DMA_CEEI(x).U = (v)) -#endif -//@} - -/* - * Constants & macros for individual DMA_CEEI bitfields - */ - -/*! - * @name Register DMA_CEEI, field CEEI[3:0] (WORZ) - * - * Clears the corresponding bit in EEI - */ -//@{ -#define BP_DMA_CEEI_CEEI (0U) //!< Bit position for DMA_CEEI_CEEI. -#define BM_DMA_CEEI_CEEI (0x0FU) //!< Bit mask for DMA_CEEI_CEEI. -#define BS_DMA_CEEI_CEEI (4U) //!< Bit field size in bits for DMA_CEEI_CEEI. - -//! @brief Format value for bitfield DMA_CEEI_CEEI. -#define BF_DMA_CEEI_CEEI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CEEI_CEEI), uint8_t) & BM_DMA_CEEI_CEEI) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CEEI field to a new value. -#define BW_DMA_CEEI_CEEI(x, v) (HW_DMA_CEEI_WR(x, (HW_DMA_CEEI_RD(x) & ~BM_DMA_CEEI_CEEI) | BF_DMA_CEEI_CEEI(v))) -#endif -//@} - -/*! - * @name Register DMA_CEEI, field CAEE[6] (WORZ) - * - * Values: - * - 0 - Clear only the EEI bit specified in the CEEI field - * - 1 - Clear all bits in EEI - */ -//@{ -#define BP_DMA_CEEI_CAEE (6U) //!< Bit position for DMA_CEEI_CAEE. -#define BM_DMA_CEEI_CAEE (0x40U) //!< Bit mask for DMA_CEEI_CAEE. -#define BS_DMA_CEEI_CAEE (1U) //!< Bit field size in bits for DMA_CEEI_CAEE. - -//! @brief Format value for bitfield DMA_CEEI_CAEE. -#define BF_DMA_CEEI_CAEE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CEEI_CAEE), uint8_t) & BM_DMA_CEEI_CAEE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CAEE field to a new value. -#define BW_DMA_CEEI_CAEE(x, v) (BITBAND_ACCESS8(HW_DMA_CEEI_ADDR(x), BP_DMA_CEEI_CAEE) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CEEI, field NOP[7] (WORZ) - * - * Values: - * - 0 - Normal operation - * - 1 - No operation, ignore the other bits in this register - */ -//@{ -#define BP_DMA_CEEI_NOP (7U) //!< Bit position for DMA_CEEI_NOP. -#define BM_DMA_CEEI_NOP (0x80U) //!< Bit mask for DMA_CEEI_NOP. -#define BS_DMA_CEEI_NOP (1U) //!< Bit field size in bits for DMA_CEEI_NOP. - -//! @brief Format value for bitfield DMA_CEEI_NOP. -#define BF_DMA_CEEI_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CEEI_NOP), uint8_t) & BM_DMA_CEEI_NOP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NOP field to a new value. -#define BW_DMA_CEEI_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CEEI_ADDR(x), BP_DMA_CEEI_NOP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_SEEI - Set Enable Error Interrupt Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_SEEI - Set Enable Error Interrupt Register (WO) - * - * Reset value: 0x00U - * - * The SEEI provides a simple memory-mapped mechanism to set a given bit in the - * EEI to enable the error interrupt for a given channel. The data value on a - * register write causes the corresponding bit in the EEI to be set. Setting the - * SAEE bit provides a global set function, forcing the entire EEI contents to be - * set. If the NOP bit is set, the command is ignored. This allows you to write - * multiple-byte registers as a 32-bit word. Reads of this register return all - * zeroes. - */ -typedef union _hw_dma_seei -{ - uint8_t U; - struct _hw_dma_seei_bitfields - { - uint8_t SEEI : 4; //!< [3:0] Set Enable Error Interrupt - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t SAEE : 1; //!< [6] Sets All Enable Error Interrupts - uint8_t NOP : 1; //!< [7] No Op enable - } B; -} hw_dma_seei_t; -#endif - -/*! - * @name Constants and macros for entire DMA_SEEI register - */ -//@{ -#define HW_DMA_SEEI_ADDR(x) (REGS_DMA_BASE(x) + 0x19U) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_SEEI(x) (*(__O hw_dma_seei_t *) HW_DMA_SEEI_ADDR(x)) -#define HW_DMA_SEEI_RD(x) (HW_DMA_SEEI(x).U) -#define HW_DMA_SEEI_WR(x, v) (HW_DMA_SEEI(x).U = (v)) -#endif -//@} - -/* - * Constants & macros for individual DMA_SEEI bitfields - */ - -/*! - * @name Register DMA_SEEI, field SEEI[3:0] (WORZ) - * - * Sets the corresponding bit in EEI - */ -//@{ -#define BP_DMA_SEEI_SEEI (0U) //!< Bit position for DMA_SEEI_SEEI. -#define BM_DMA_SEEI_SEEI (0x0FU) //!< Bit mask for DMA_SEEI_SEEI. -#define BS_DMA_SEEI_SEEI (4U) //!< Bit field size in bits for DMA_SEEI_SEEI. - -//! @brief Format value for bitfield DMA_SEEI_SEEI. -#define BF_DMA_SEEI_SEEI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SEEI_SEEI), uint8_t) & BM_DMA_SEEI_SEEI) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SEEI field to a new value. -#define BW_DMA_SEEI_SEEI(x, v) (HW_DMA_SEEI_WR(x, (HW_DMA_SEEI_RD(x) & ~BM_DMA_SEEI_SEEI) | BF_DMA_SEEI_SEEI(v))) -#endif -//@} - -/*! - * @name Register DMA_SEEI, field SAEE[6] (WORZ) - * - * Values: - * - 0 - Set only the EEI bit specified in the SEEI field. - * - 1 - Sets all bits in EEI - */ -//@{ -#define BP_DMA_SEEI_SAEE (6U) //!< Bit position for DMA_SEEI_SAEE. -#define BM_DMA_SEEI_SAEE (0x40U) //!< Bit mask for DMA_SEEI_SAEE. -#define BS_DMA_SEEI_SAEE (1U) //!< Bit field size in bits for DMA_SEEI_SAEE. - -//! @brief Format value for bitfield DMA_SEEI_SAEE. -#define BF_DMA_SEEI_SAEE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SEEI_SAEE), uint8_t) & BM_DMA_SEEI_SAEE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SAEE field to a new value. -#define BW_DMA_SEEI_SAEE(x, v) (BITBAND_ACCESS8(HW_DMA_SEEI_ADDR(x), BP_DMA_SEEI_SAEE) = (v)) -#endif -//@} - -/*! - * @name Register DMA_SEEI, field NOP[7] (WORZ) - * - * Values: - * - 0 - Normal operation - * - 1 - No operation, ignore the other bits in this register - */ -//@{ -#define BP_DMA_SEEI_NOP (7U) //!< Bit position for DMA_SEEI_NOP. -#define BM_DMA_SEEI_NOP (0x80U) //!< Bit mask for DMA_SEEI_NOP. -#define BS_DMA_SEEI_NOP (1U) //!< Bit field size in bits for DMA_SEEI_NOP. - -//! @brief Format value for bitfield DMA_SEEI_NOP. -#define BF_DMA_SEEI_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SEEI_NOP), uint8_t) & BM_DMA_SEEI_NOP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NOP field to a new value. -#define BW_DMA_SEEI_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SEEI_ADDR(x), BP_DMA_SEEI_NOP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_CERQ - Clear Enable Request Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_CERQ - Clear Enable Request Register (WO) - * - * Reset value: 0x00U - * - * The CERQ provides a simple memory-mapped mechanism to clear a given bit in - * the ERQ to disable the DMA request for a given channel. The data value on a - * register write causes the corresponding bit in the ERQ to be cleared. Setting the - * CAER bit provides a global clear function, forcing the entire contents of the - * ERQ to be cleared, disabling all DMA request inputs. If NOP is set, the - * command is ignored. This allows you to write multiple-byte registers as a 32-bit - * word. Reads of this register return all zeroes. - */ -typedef union _hw_dma_cerq -{ - uint8_t U; - struct _hw_dma_cerq_bitfields - { - uint8_t CERQ : 4; //!< [3:0] Clear Enable Request - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t CAER : 1; //!< [6] Clear All Enable Requests - uint8_t NOP : 1; //!< [7] No Op enable - } B; -} hw_dma_cerq_t; -#endif - -/*! - * @name Constants and macros for entire DMA_CERQ register - */ -//@{ -#define HW_DMA_CERQ_ADDR(x) (REGS_DMA_BASE(x) + 0x1AU) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_CERQ(x) (*(__O hw_dma_cerq_t *) HW_DMA_CERQ_ADDR(x)) -#define HW_DMA_CERQ_RD(x) (HW_DMA_CERQ(x).U) -#define HW_DMA_CERQ_WR(x, v) (HW_DMA_CERQ(x).U = (v)) -#endif -//@} - -/* - * Constants & macros for individual DMA_CERQ bitfields - */ - -/*! - * @name Register DMA_CERQ, field CERQ[3:0] (WORZ) - * - * Clears the corresponding bit in ERQ - */ -//@{ -#define BP_DMA_CERQ_CERQ (0U) //!< Bit position for DMA_CERQ_CERQ. -#define BM_DMA_CERQ_CERQ (0x0FU) //!< Bit mask for DMA_CERQ_CERQ. -#define BS_DMA_CERQ_CERQ (4U) //!< Bit field size in bits for DMA_CERQ_CERQ. - -//! @brief Format value for bitfield DMA_CERQ_CERQ. -#define BF_DMA_CERQ_CERQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERQ_CERQ), uint8_t) & BM_DMA_CERQ_CERQ) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CERQ field to a new value. -#define BW_DMA_CERQ_CERQ(x, v) (HW_DMA_CERQ_WR(x, (HW_DMA_CERQ_RD(x) & ~BM_DMA_CERQ_CERQ) | BF_DMA_CERQ_CERQ(v))) -#endif -//@} - -/*! - * @name Register DMA_CERQ, field CAER[6] (WORZ) - * - * Values: - * - 0 - Clear only the ERQ bit specified in the CERQ field - * - 1 - Clear all bits in ERQ - */ -//@{ -#define BP_DMA_CERQ_CAER (6U) //!< Bit position for DMA_CERQ_CAER. -#define BM_DMA_CERQ_CAER (0x40U) //!< Bit mask for DMA_CERQ_CAER. -#define BS_DMA_CERQ_CAER (1U) //!< Bit field size in bits for DMA_CERQ_CAER. - -//! @brief Format value for bitfield DMA_CERQ_CAER. -#define BF_DMA_CERQ_CAER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERQ_CAER), uint8_t) & BM_DMA_CERQ_CAER) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CAER field to a new value. -#define BW_DMA_CERQ_CAER(x, v) (BITBAND_ACCESS8(HW_DMA_CERQ_ADDR(x), BP_DMA_CERQ_CAER) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CERQ, field NOP[7] (WORZ) - * - * Values: - * - 0 - Normal operation - * - 1 - No operation, ignore the other bits in this register - */ -//@{ -#define BP_DMA_CERQ_NOP (7U) //!< Bit position for DMA_CERQ_NOP. -#define BM_DMA_CERQ_NOP (0x80U) //!< Bit mask for DMA_CERQ_NOP. -#define BS_DMA_CERQ_NOP (1U) //!< Bit field size in bits for DMA_CERQ_NOP. - -//! @brief Format value for bitfield DMA_CERQ_NOP. -#define BF_DMA_CERQ_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERQ_NOP), uint8_t) & BM_DMA_CERQ_NOP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NOP field to a new value. -#define BW_DMA_CERQ_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CERQ_ADDR(x), BP_DMA_CERQ_NOP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_SERQ - Set Enable Request Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_SERQ - Set Enable Request Register (WO) - * - * Reset value: 0x00U - * - * The SERQ provides a simple memory-mapped mechanism to set a given bit in the - * ERQ to enable the DMA request for a given channel. The data value on a - * register write causes the corresponding bit in the ERQ to be set. Setting the SAER - * bit provides a global set function, forcing the entire contents of ERQ to be - * set. If the NOP bit is set, the command is ignored. This allows you to write - * multiple-byte registers as a 32-bit word. Reads of this register return all zeroes. - */ -typedef union _hw_dma_serq -{ - uint8_t U; - struct _hw_dma_serq_bitfields - { - uint8_t SERQ : 4; //!< [3:0] Set enable request - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t SAER : 1; //!< [6] Set All Enable Requests - uint8_t NOP : 1; //!< [7] No Op enable - } B; -} hw_dma_serq_t; -#endif - -/*! - * @name Constants and macros for entire DMA_SERQ register - */ -//@{ -#define HW_DMA_SERQ_ADDR(x) (REGS_DMA_BASE(x) + 0x1BU) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_SERQ(x) (*(__O hw_dma_serq_t *) HW_DMA_SERQ_ADDR(x)) -#define HW_DMA_SERQ_RD(x) (HW_DMA_SERQ(x).U) -#define HW_DMA_SERQ_WR(x, v) (HW_DMA_SERQ(x).U = (v)) -#endif -//@} - -/* - * Constants & macros for individual DMA_SERQ bitfields - */ - -/*! - * @name Register DMA_SERQ, field SERQ[3:0] (WORZ) - * - * Sets the corresponding bit in ERQ - */ -//@{ -#define BP_DMA_SERQ_SERQ (0U) //!< Bit position for DMA_SERQ_SERQ. -#define BM_DMA_SERQ_SERQ (0x0FU) //!< Bit mask for DMA_SERQ_SERQ. -#define BS_DMA_SERQ_SERQ (4U) //!< Bit field size in bits for DMA_SERQ_SERQ. - -//! @brief Format value for bitfield DMA_SERQ_SERQ. -#define BF_DMA_SERQ_SERQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SERQ_SERQ), uint8_t) & BM_DMA_SERQ_SERQ) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SERQ field to a new value. -#define BW_DMA_SERQ_SERQ(x, v) (HW_DMA_SERQ_WR(x, (HW_DMA_SERQ_RD(x) & ~BM_DMA_SERQ_SERQ) | BF_DMA_SERQ_SERQ(v))) -#endif -//@} - -/*! - * @name Register DMA_SERQ, field SAER[6] (WORZ) - * - * Values: - * - 0 - Set only the ERQ bit specified in the SERQ field - * - 1 - Set all bits in ERQ - */ -//@{ -#define BP_DMA_SERQ_SAER (6U) //!< Bit position for DMA_SERQ_SAER. -#define BM_DMA_SERQ_SAER (0x40U) //!< Bit mask for DMA_SERQ_SAER. -#define BS_DMA_SERQ_SAER (1U) //!< Bit field size in bits for DMA_SERQ_SAER. - -//! @brief Format value for bitfield DMA_SERQ_SAER. -#define BF_DMA_SERQ_SAER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SERQ_SAER), uint8_t) & BM_DMA_SERQ_SAER) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SAER field to a new value. -#define BW_DMA_SERQ_SAER(x, v) (BITBAND_ACCESS8(HW_DMA_SERQ_ADDR(x), BP_DMA_SERQ_SAER) = (v)) -#endif -//@} - -/*! - * @name Register DMA_SERQ, field NOP[7] (WORZ) - * - * Values: - * - 0 - Normal operation - * - 1 - No operation, ignore the other bits in this register - */ -//@{ -#define BP_DMA_SERQ_NOP (7U) //!< Bit position for DMA_SERQ_NOP. -#define BM_DMA_SERQ_NOP (0x80U) //!< Bit mask for DMA_SERQ_NOP. -#define BS_DMA_SERQ_NOP (1U) //!< Bit field size in bits for DMA_SERQ_NOP. - -//! @brief Format value for bitfield DMA_SERQ_NOP. -#define BF_DMA_SERQ_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SERQ_NOP), uint8_t) & BM_DMA_SERQ_NOP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NOP field to a new value. -#define BW_DMA_SERQ_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SERQ_ADDR(x), BP_DMA_SERQ_NOP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_CDNE - Clear DONE Status Bit Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_CDNE - Clear DONE Status Bit Register (WO) - * - * Reset value: 0x00U - * - * The CDNE provides a simple memory-mapped mechanism to clear the DONE bit in - * the TCD of the given channel. The data value on a register write causes the - * DONE bit in the corresponding transfer control descriptor to be cleared. Setting - * the CADN bit provides a global clear function, forcing all DONE bits to be - * cleared. If the NOP bit is set, the command is ignored. This allows you to write - * multiple-byte registers as a 32-bit word. Reads of this register return all - * zeroes. - */ -typedef union _hw_dma_cdne -{ - uint8_t U; - struct _hw_dma_cdne_bitfields - { - uint8_t CDNE : 4; //!< [3:0] Clear DONE Bit - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t CADN : 1; //!< [6] Clears All DONE Bits - uint8_t NOP : 1; //!< [7] No Op enable - } B; -} hw_dma_cdne_t; -#endif - -/*! - * @name Constants and macros for entire DMA_CDNE register - */ -//@{ -#define HW_DMA_CDNE_ADDR(x) (REGS_DMA_BASE(x) + 0x1CU) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_CDNE(x) (*(__O hw_dma_cdne_t *) HW_DMA_CDNE_ADDR(x)) -#define HW_DMA_CDNE_RD(x) (HW_DMA_CDNE(x).U) -#define HW_DMA_CDNE_WR(x, v) (HW_DMA_CDNE(x).U = (v)) -#endif -//@} - -/* - * Constants & macros for individual DMA_CDNE bitfields - */ - -/*! - * @name Register DMA_CDNE, field CDNE[3:0] (WORZ) - * - * Clears the corresponding bit in TCDn_CSR[DONE] - */ -//@{ -#define BP_DMA_CDNE_CDNE (0U) //!< Bit position for DMA_CDNE_CDNE. -#define BM_DMA_CDNE_CDNE (0x0FU) //!< Bit mask for DMA_CDNE_CDNE. -#define BS_DMA_CDNE_CDNE (4U) //!< Bit field size in bits for DMA_CDNE_CDNE. - -//! @brief Format value for bitfield DMA_CDNE_CDNE. -#define BF_DMA_CDNE_CDNE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CDNE_CDNE), uint8_t) & BM_DMA_CDNE_CDNE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CDNE field to a new value. -#define BW_DMA_CDNE_CDNE(x, v) (HW_DMA_CDNE_WR(x, (HW_DMA_CDNE_RD(x) & ~BM_DMA_CDNE_CDNE) | BF_DMA_CDNE_CDNE(v))) -#endif -//@} - -/*! - * @name Register DMA_CDNE, field CADN[6] (WORZ) - * - * Values: - * - 0 - Clears only the TCDn_CSR[DONE] bit specified in the CDNE field - * - 1 - Clears all bits in TCDn_CSR[DONE] - */ -//@{ -#define BP_DMA_CDNE_CADN (6U) //!< Bit position for DMA_CDNE_CADN. -#define BM_DMA_CDNE_CADN (0x40U) //!< Bit mask for DMA_CDNE_CADN. -#define BS_DMA_CDNE_CADN (1U) //!< Bit field size in bits for DMA_CDNE_CADN. - -//! @brief Format value for bitfield DMA_CDNE_CADN. -#define BF_DMA_CDNE_CADN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CDNE_CADN), uint8_t) & BM_DMA_CDNE_CADN) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CADN field to a new value. -#define BW_DMA_CDNE_CADN(x, v) (BITBAND_ACCESS8(HW_DMA_CDNE_ADDR(x), BP_DMA_CDNE_CADN) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CDNE, field NOP[7] (WORZ) - * - * Values: - * - 0 - Normal operation - * - 1 - No operation, ignore the other bits in this register - */ -//@{ -#define BP_DMA_CDNE_NOP (7U) //!< Bit position for DMA_CDNE_NOP. -#define BM_DMA_CDNE_NOP (0x80U) //!< Bit mask for DMA_CDNE_NOP. -#define BS_DMA_CDNE_NOP (1U) //!< Bit field size in bits for DMA_CDNE_NOP. - -//! @brief Format value for bitfield DMA_CDNE_NOP. -#define BF_DMA_CDNE_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CDNE_NOP), uint8_t) & BM_DMA_CDNE_NOP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NOP field to a new value. -#define BW_DMA_CDNE_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CDNE_ADDR(x), BP_DMA_CDNE_NOP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_SSRT - Set START Bit Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_SSRT - Set START Bit Register (WO) - * - * Reset value: 0x00U - * - * The SSRT provides a simple memory-mapped mechanism to set the START bit in - * the TCD of the given channel. The data value on a register write causes the - * START bit in the corresponding transfer control descriptor to be set. Setting the - * SAST bit provides a global set function, forcing all START bits to be set. If - * the NOP bit is set, the command is ignored. This allows you to write - * multiple-byte registers as a 32-bit word. Reads of this register return all zeroes. - */ -typedef union _hw_dma_ssrt -{ - uint8_t U; - struct _hw_dma_ssrt_bitfields - { - uint8_t SSRT : 4; //!< [3:0] Set START Bit - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t SAST : 1; //!< [6] Set All START Bits (activates all channels) - uint8_t NOP : 1; //!< [7] No Op enable - } B; -} hw_dma_ssrt_t; -#endif - -/*! - * @name Constants and macros for entire DMA_SSRT register - */ -//@{ -#define HW_DMA_SSRT_ADDR(x) (REGS_DMA_BASE(x) + 0x1DU) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_SSRT(x) (*(__O hw_dma_ssrt_t *) HW_DMA_SSRT_ADDR(x)) -#define HW_DMA_SSRT_RD(x) (HW_DMA_SSRT(x).U) -#define HW_DMA_SSRT_WR(x, v) (HW_DMA_SSRT(x).U = (v)) -#endif -//@} - -/* - * Constants & macros for individual DMA_SSRT bitfields - */ - -/*! - * @name Register DMA_SSRT, field SSRT[3:0] (WORZ) - * - * Sets the corresponding bit in TCDn_CSR[START] - */ -//@{ -#define BP_DMA_SSRT_SSRT (0U) //!< Bit position for DMA_SSRT_SSRT. -#define BM_DMA_SSRT_SSRT (0x0FU) //!< Bit mask for DMA_SSRT_SSRT. -#define BS_DMA_SSRT_SSRT (4U) //!< Bit field size in bits for DMA_SSRT_SSRT. - -//! @brief Format value for bitfield DMA_SSRT_SSRT. -#define BF_DMA_SSRT_SSRT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SSRT_SSRT), uint8_t) & BM_DMA_SSRT_SSRT) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SSRT field to a new value. -#define BW_DMA_SSRT_SSRT(x, v) (HW_DMA_SSRT_WR(x, (HW_DMA_SSRT_RD(x) & ~BM_DMA_SSRT_SSRT) | BF_DMA_SSRT_SSRT(v))) -#endif -//@} - -/*! - * @name Register DMA_SSRT, field SAST[6] (WORZ) - * - * Values: - * - 0 - Set only the TCDn_CSR[START] bit specified in the SSRT field - * - 1 - Set all bits in TCDn_CSR[START] - */ -//@{ -#define BP_DMA_SSRT_SAST (6U) //!< Bit position for DMA_SSRT_SAST. -#define BM_DMA_SSRT_SAST (0x40U) //!< Bit mask for DMA_SSRT_SAST. -#define BS_DMA_SSRT_SAST (1U) //!< Bit field size in bits for DMA_SSRT_SAST. - -//! @brief Format value for bitfield DMA_SSRT_SAST. -#define BF_DMA_SSRT_SAST(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SSRT_SAST), uint8_t) & BM_DMA_SSRT_SAST) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SAST field to a new value. -#define BW_DMA_SSRT_SAST(x, v) (BITBAND_ACCESS8(HW_DMA_SSRT_ADDR(x), BP_DMA_SSRT_SAST) = (v)) -#endif -//@} - -/*! - * @name Register DMA_SSRT, field NOP[7] (WORZ) - * - * Values: - * - 0 - Normal operation - * - 1 - No operation, ignore the other bits in this register - */ -//@{ -#define BP_DMA_SSRT_NOP (7U) //!< Bit position for DMA_SSRT_NOP. -#define BM_DMA_SSRT_NOP (0x80U) //!< Bit mask for DMA_SSRT_NOP. -#define BS_DMA_SSRT_NOP (1U) //!< Bit field size in bits for DMA_SSRT_NOP. - -//! @brief Format value for bitfield DMA_SSRT_NOP. -#define BF_DMA_SSRT_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SSRT_NOP), uint8_t) & BM_DMA_SSRT_NOP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NOP field to a new value. -#define BW_DMA_SSRT_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SSRT_ADDR(x), BP_DMA_SSRT_NOP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_CERR - Clear Error Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_CERR - Clear Error Register (WO) - * - * Reset value: 0x00U - * - * The CERR provides a simple memory-mapped mechanism to clear a given bit in - * the ERR to disable the error condition flag for a given channel. The given value - * on a register write causes the corresponding bit in the ERR to be cleared. - * Setting the CAEI bit provides a global clear function, forcing the ERR contents - * to be cleared, clearing all channel error indicators. If the NOP bit is set, - * the command is ignored. This allows you to write multiple-byte registers as a - * 32-bit word. Reads of this register return all zeroes. - */ -typedef union _hw_dma_cerr -{ - uint8_t U; - struct _hw_dma_cerr_bitfields - { - uint8_t CERR : 4; //!< [3:0] Clear Error Indicator - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t CAEI : 1; //!< [6] Clear All Error Indicators - uint8_t NOP : 1; //!< [7] No Op enable - } B; -} hw_dma_cerr_t; -#endif - -/*! - * @name Constants and macros for entire DMA_CERR register - */ -//@{ -#define HW_DMA_CERR_ADDR(x) (REGS_DMA_BASE(x) + 0x1EU) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_CERR(x) (*(__O hw_dma_cerr_t *) HW_DMA_CERR_ADDR(x)) -#define HW_DMA_CERR_RD(x) (HW_DMA_CERR(x).U) -#define HW_DMA_CERR_WR(x, v) (HW_DMA_CERR(x).U = (v)) -#endif -//@} - -/* - * Constants & macros for individual DMA_CERR bitfields - */ - -/*! - * @name Register DMA_CERR, field CERR[3:0] (WORZ) - * - * Clears the corresponding bit in ERR - */ -//@{ -#define BP_DMA_CERR_CERR (0U) //!< Bit position for DMA_CERR_CERR. -#define BM_DMA_CERR_CERR (0x0FU) //!< Bit mask for DMA_CERR_CERR. -#define BS_DMA_CERR_CERR (4U) //!< Bit field size in bits for DMA_CERR_CERR. - -//! @brief Format value for bitfield DMA_CERR_CERR. -#define BF_DMA_CERR_CERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERR_CERR), uint8_t) & BM_DMA_CERR_CERR) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CERR field to a new value. -#define BW_DMA_CERR_CERR(x, v) (HW_DMA_CERR_WR(x, (HW_DMA_CERR_RD(x) & ~BM_DMA_CERR_CERR) | BF_DMA_CERR_CERR(v))) -#endif -//@} - -/*! - * @name Register DMA_CERR, field CAEI[6] (WORZ) - * - * Values: - * - 0 - Clear only the ERR bit specified in the CERR field - * - 1 - Clear all bits in ERR - */ -//@{ -#define BP_DMA_CERR_CAEI (6U) //!< Bit position for DMA_CERR_CAEI. -#define BM_DMA_CERR_CAEI (0x40U) //!< Bit mask for DMA_CERR_CAEI. -#define BS_DMA_CERR_CAEI (1U) //!< Bit field size in bits for DMA_CERR_CAEI. - -//! @brief Format value for bitfield DMA_CERR_CAEI. -#define BF_DMA_CERR_CAEI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERR_CAEI), uint8_t) & BM_DMA_CERR_CAEI) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CAEI field to a new value. -#define BW_DMA_CERR_CAEI(x, v) (BITBAND_ACCESS8(HW_DMA_CERR_ADDR(x), BP_DMA_CERR_CAEI) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CERR, field NOP[7] (WORZ) - * - * Values: - * - 0 - Normal operation - * - 1 - No operation, ignore the other bits in this register - */ -//@{ -#define BP_DMA_CERR_NOP (7U) //!< Bit position for DMA_CERR_NOP. -#define BM_DMA_CERR_NOP (0x80U) //!< Bit mask for DMA_CERR_NOP. -#define BS_DMA_CERR_NOP (1U) //!< Bit field size in bits for DMA_CERR_NOP. - -//! @brief Format value for bitfield DMA_CERR_NOP. -#define BF_DMA_CERR_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERR_NOP), uint8_t) & BM_DMA_CERR_NOP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NOP field to a new value. -#define BW_DMA_CERR_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CERR_ADDR(x), BP_DMA_CERR_NOP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_CINT - Clear Interrupt Request Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_CINT - Clear Interrupt Request Register (WO) - * - * Reset value: 0x00U - * - * The CINT provides a simple, memory-mapped mechanism to clear a given bit in - * the INT to disable the interrupt request for a given channel. The given value - * on a register write causes the corresponding bit in the INT to be cleared. - * Setting the CAIR bit provides a global clear function, forcing the entire contents - * of the INT to be cleared, disabling all DMA interrupt requests. If the NOP - * bit is set, the command is ignored. This allows you to write multiple-byte - * registers as a 32-bit word. Reads of this register return all zeroes. - */ -typedef union _hw_dma_cint -{ - uint8_t U; - struct _hw_dma_cint_bitfields - { - uint8_t CINT : 4; //!< [3:0] Clear Interrupt Request - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t CAIR : 1; //!< [6] Clear All Interrupt Requests - uint8_t NOP : 1; //!< [7] No Op enable - } B; -} hw_dma_cint_t; -#endif - -/*! - * @name Constants and macros for entire DMA_CINT register - */ -//@{ -#define HW_DMA_CINT_ADDR(x) (REGS_DMA_BASE(x) + 0x1FU) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_CINT(x) (*(__O hw_dma_cint_t *) HW_DMA_CINT_ADDR(x)) -#define HW_DMA_CINT_RD(x) (HW_DMA_CINT(x).U) -#define HW_DMA_CINT_WR(x, v) (HW_DMA_CINT(x).U = (v)) -#endif -//@} - -/* - * Constants & macros for individual DMA_CINT bitfields - */ - -/*! - * @name Register DMA_CINT, field CINT[3:0] (WORZ) - * - * Clears the corresponding bit in INT - */ -//@{ -#define BP_DMA_CINT_CINT (0U) //!< Bit position for DMA_CINT_CINT. -#define BM_DMA_CINT_CINT (0x0FU) //!< Bit mask for DMA_CINT_CINT. -#define BS_DMA_CINT_CINT (4U) //!< Bit field size in bits for DMA_CINT_CINT. - -//! @brief Format value for bitfield DMA_CINT_CINT. -#define BF_DMA_CINT_CINT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CINT_CINT), uint8_t) & BM_DMA_CINT_CINT) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CINT field to a new value. -#define BW_DMA_CINT_CINT(x, v) (HW_DMA_CINT_WR(x, (HW_DMA_CINT_RD(x) & ~BM_DMA_CINT_CINT) | BF_DMA_CINT_CINT(v))) -#endif -//@} - -/*! - * @name Register DMA_CINT, field CAIR[6] (WORZ) - * - * Values: - * - 0 - Clear only the INT bit specified in the CINT field - * - 1 - Clear all bits in INT - */ -//@{ -#define BP_DMA_CINT_CAIR (6U) //!< Bit position for DMA_CINT_CAIR. -#define BM_DMA_CINT_CAIR (0x40U) //!< Bit mask for DMA_CINT_CAIR. -#define BS_DMA_CINT_CAIR (1U) //!< Bit field size in bits for DMA_CINT_CAIR. - -//! @brief Format value for bitfield DMA_CINT_CAIR. -#define BF_DMA_CINT_CAIR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CINT_CAIR), uint8_t) & BM_DMA_CINT_CAIR) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CAIR field to a new value. -#define BW_DMA_CINT_CAIR(x, v) (BITBAND_ACCESS8(HW_DMA_CINT_ADDR(x), BP_DMA_CINT_CAIR) = (v)) -#endif -//@} - -/*! - * @name Register DMA_CINT, field NOP[7] (WORZ) - * - * Values: - * - 0 - Normal operation - * - 1 - No operation, ignore the other bits in this register - */ -//@{ -#define BP_DMA_CINT_NOP (7U) //!< Bit position for DMA_CINT_NOP. -#define BM_DMA_CINT_NOP (0x80U) //!< Bit mask for DMA_CINT_NOP. -#define BS_DMA_CINT_NOP (1U) //!< Bit field size in bits for DMA_CINT_NOP. - -//! @brief Format value for bitfield DMA_CINT_NOP. -#define BF_DMA_CINT_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CINT_NOP), uint8_t) & BM_DMA_CINT_NOP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NOP field to a new value. -#define BW_DMA_CINT_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CINT_ADDR(x), BP_DMA_CINT_NOP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_INT - Interrupt Request Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_INT - Interrupt Request Register (RW) - * - * Reset value: 0x00000000U - * - * The INT register provides a bit map for the 16 channels signaling the - * presence of an interrupt request for each channel. Depending on the appropriate bit - * setting in the transfer-control descriptors, the eDMA engine generates an - * interrupt on data transfer completion. The outputs of this register are directly - * routed to the interrupt controller (INTC). During the interrupt-service routine - * associated with any given channel, it is the software's responsibility to - * clear the appropriate bit, negating the interrupt request. Typically, a write to - * the CINT register in the interrupt service routine is used for this purpose. - * The state of any given channel's interrupt request is directly affected by - * writes to this register; it is also affected by writes to the CINT register. On - * writes to INT, a 1 in any bit position clears the corresponding channel's - * interrupt request. A zero in any bit position has no affect on the corresponding - * channel's current interrupt status. The CINT register is provided so the interrupt - * request for a single channel can easily be cleared without the need to - * perform a read-modify-write sequence to the INT register. - */ -typedef union _hw_dma_int -{ - uint32_t U; - struct _hw_dma_int_bitfields - { - uint32_t INT0 : 1; //!< [0] Interrupt Request 0 - uint32_t INT1 : 1; //!< [1] Interrupt Request 1 - uint32_t INT2 : 1; //!< [2] Interrupt Request 2 - uint32_t INT3 : 1; //!< [3] Interrupt Request 3 - uint32_t INT4 : 1; //!< [4] Interrupt Request 4 - uint32_t INT5 : 1; //!< [5] Interrupt Request 5 - uint32_t INT6 : 1; //!< [6] Interrupt Request 6 - uint32_t INT7 : 1; //!< [7] Interrupt Request 7 - uint32_t INT8 : 1; //!< [8] Interrupt Request 8 - uint32_t INT9 : 1; //!< [9] Interrupt Request 9 - uint32_t INT10 : 1; //!< [10] Interrupt Request 10 - uint32_t INT11 : 1; //!< [11] Interrupt Request 11 - uint32_t INT12 : 1; //!< [12] Interrupt Request 12 - uint32_t INT13 : 1; //!< [13] Interrupt Request 13 - uint32_t INT14 : 1; //!< [14] Interrupt Request 14 - uint32_t INT15 : 1; //!< [15] Interrupt Request 15 - uint32_t RESERVED0 : 16; //!< [31:16] - } B; -} hw_dma_int_t; -#endif - -/*! - * @name Constants and macros for entire DMA_INT register - */ -//@{ -#define HW_DMA_INT_ADDR(x) (REGS_DMA_BASE(x) + 0x24U) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_INT(x) (*(__IO hw_dma_int_t *) HW_DMA_INT_ADDR(x)) -#define HW_DMA_INT_RD(x) (HW_DMA_INT(x).U) -#define HW_DMA_INT_WR(x, v) (HW_DMA_INT(x).U = (v)) -#define HW_DMA_INT_SET(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) | (v))) -#define HW_DMA_INT_CLR(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) & ~(v))) -#define HW_DMA_INT_TOG(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_INT bitfields - */ - -/*! - * @name Register DMA_INT, field INT0[0] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT0 (0U) //!< Bit position for DMA_INT_INT0. -#define BM_DMA_INT_INT0 (0x00000001U) //!< Bit mask for DMA_INT_INT0. -#define BS_DMA_INT_INT0 (1U) //!< Bit field size in bits for DMA_INT_INT0. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT0 field. -#define BR_DMA_INT_INT0(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT0)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT0. -#define BF_DMA_INT_INT0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT0), uint32_t) & BM_DMA_INT_INT0) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT0 field to a new value. -#define BW_DMA_INT_INT0(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT0) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT1[1] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT1 (1U) //!< Bit position for DMA_INT_INT1. -#define BM_DMA_INT_INT1 (0x00000002U) //!< Bit mask for DMA_INT_INT1. -#define BS_DMA_INT_INT1 (1U) //!< Bit field size in bits for DMA_INT_INT1. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT1 field. -#define BR_DMA_INT_INT1(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT1)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT1. -#define BF_DMA_INT_INT1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT1), uint32_t) & BM_DMA_INT_INT1) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT1 field to a new value. -#define BW_DMA_INT_INT1(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT1) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT2[2] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT2 (2U) //!< Bit position for DMA_INT_INT2. -#define BM_DMA_INT_INT2 (0x00000004U) //!< Bit mask for DMA_INT_INT2. -#define BS_DMA_INT_INT2 (1U) //!< Bit field size in bits for DMA_INT_INT2. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT2 field. -#define BR_DMA_INT_INT2(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT2)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT2. -#define BF_DMA_INT_INT2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT2), uint32_t) & BM_DMA_INT_INT2) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT2 field to a new value. -#define BW_DMA_INT_INT2(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT2) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT3[3] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT3 (3U) //!< Bit position for DMA_INT_INT3. -#define BM_DMA_INT_INT3 (0x00000008U) //!< Bit mask for DMA_INT_INT3. -#define BS_DMA_INT_INT3 (1U) //!< Bit field size in bits for DMA_INT_INT3. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT3 field. -#define BR_DMA_INT_INT3(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT3)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT3. -#define BF_DMA_INT_INT3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT3), uint32_t) & BM_DMA_INT_INT3) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT3 field to a new value. -#define BW_DMA_INT_INT3(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT3) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT4[4] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT4 (4U) //!< Bit position for DMA_INT_INT4. -#define BM_DMA_INT_INT4 (0x00000010U) //!< Bit mask for DMA_INT_INT4. -#define BS_DMA_INT_INT4 (1U) //!< Bit field size in bits for DMA_INT_INT4. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT4 field. -#define BR_DMA_INT_INT4(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT4)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT4. -#define BF_DMA_INT_INT4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT4), uint32_t) & BM_DMA_INT_INT4) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT4 field to a new value. -#define BW_DMA_INT_INT4(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT4) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT5[5] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT5 (5U) //!< Bit position for DMA_INT_INT5. -#define BM_DMA_INT_INT5 (0x00000020U) //!< Bit mask for DMA_INT_INT5. -#define BS_DMA_INT_INT5 (1U) //!< Bit field size in bits for DMA_INT_INT5. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT5 field. -#define BR_DMA_INT_INT5(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT5)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT5. -#define BF_DMA_INT_INT5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT5), uint32_t) & BM_DMA_INT_INT5) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT5 field to a new value. -#define BW_DMA_INT_INT5(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT5) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT6[6] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT6 (6U) //!< Bit position for DMA_INT_INT6. -#define BM_DMA_INT_INT6 (0x00000040U) //!< Bit mask for DMA_INT_INT6. -#define BS_DMA_INT_INT6 (1U) //!< Bit field size in bits for DMA_INT_INT6. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT6 field. -#define BR_DMA_INT_INT6(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT6)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT6. -#define BF_DMA_INT_INT6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT6), uint32_t) & BM_DMA_INT_INT6) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT6 field to a new value. -#define BW_DMA_INT_INT6(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT6) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT7[7] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT7 (7U) //!< Bit position for DMA_INT_INT7. -#define BM_DMA_INT_INT7 (0x00000080U) //!< Bit mask for DMA_INT_INT7. -#define BS_DMA_INT_INT7 (1U) //!< Bit field size in bits for DMA_INT_INT7. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT7 field. -#define BR_DMA_INT_INT7(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT7)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT7. -#define BF_DMA_INT_INT7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT7), uint32_t) & BM_DMA_INT_INT7) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT7 field to a new value. -#define BW_DMA_INT_INT7(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT7) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT8[8] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT8 (8U) //!< Bit position for DMA_INT_INT8. -#define BM_DMA_INT_INT8 (0x00000100U) //!< Bit mask for DMA_INT_INT8. -#define BS_DMA_INT_INT8 (1U) //!< Bit field size in bits for DMA_INT_INT8. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT8 field. -#define BR_DMA_INT_INT8(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT8)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT8. -#define BF_DMA_INT_INT8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT8), uint32_t) & BM_DMA_INT_INT8) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT8 field to a new value. -#define BW_DMA_INT_INT8(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT8) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT9[9] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT9 (9U) //!< Bit position for DMA_INT_INT9. -#define BM_DMA_INT_INT9 (0x00000200U) //!< Bit mask for DMA_INT_INT9. -#define BS_DMA_INT_INT9 (1U) //!< Bit field size in bits for DMA_INT_INT9. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT9 field. -#define BR_DMA_INT_INT9(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT9)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT9. -#define BF_DMA_INT_INT9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT9), uint32_t) & BM_DMA_INT_INT9) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT9 field to a new value. -#define BW_DMA_INT_INT9(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT9) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT10[10] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT10 (10U) //!< Bit position for DMA_INT_INT10. -#define BM_DMA_INT_INT10 (0x00000400U) //!< Bit mask for DMA_INT_INT10. -#define BS_DMA_INT_INT10 (1U) //!< Bit field size in bits for DMA_INT_INT10. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT10 field. -#define BR_DMA_INT_INT10(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT10)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT10. -#define BF_DMA_INT_INT10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT10), uint32_t) & BM_DMA_INT_INT10) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT10 field to a new value. -#define BW_DMA_INT_INT10(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT10) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT11[11] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT11 (11U) //!< Bit position for DMA_INT_INT11. -#define BM_DMA_INT_INT11 (0x00000800U) //!< Bit mask for DMA_INT_INT11. -#define BS_DMA_INT_INT11 (1U) //!< Bit field size in bits for DMA_INT_INT11. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT11 field. -#define BR_DMA_INT_INT11(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT11)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT11. -#define BF_DMA_INT_INT11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT11), uint32_t) & BM_DMA_INT_INT11) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT11 field to a new value. -#define BW_DMA_INT_INT11(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT11) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT12[12] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT12 (12U) //!< Bit position for DMA_INT_INT12. -#define BM_DMA_INT_INT12 (0x00001000U) //!< Bit mask for DMA_INT_INT12. -#define BS_DMA_INT_INT12 (1U) //!< Bit field size in bits for DMA_INT_INT12. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT12 field. -#define BR_DMA_INT_INT12(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT12)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT12. -#define BF_DMA_INT_INT12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT12), uint32_t) & BM_DMA_INT_INT12) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT12 field to a new value. -#define BW_DMA_INT_INT12(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT12) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT13[13] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT13 (13U) //!< Bit position for DMA_INT_INT13. -#define BM_DMA_INT_INT13 (0x00002000U) //!< Bit mask for DMA_INT_INT13. -#define BS_DMA_INT_INT13 (1U) //!< Bit field size in bits for DMA_INT_INT13. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT13 field. -#define BR_DMA_INT_INT13(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT13)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT13. -#define BF_DMA_INT_INT13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT13), uint32_t) & BM_DMA_INT_INT13) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT13 field to a new value. -#define BW_DMA_INT_INT13(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT13) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT14[14] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT14 (14U) //!< Bit position for DMA_INT_INT14. -#define BM_DMA_INT_INT14 (0x00004000U) //!< Bit mask for DMA_INT_INT14. -#define BS_DMA_INT_INT14 (1U) //!< Bit field size in bits for DMA_INT_INT14. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT14 field. -#define BR_DMA_INT_INT14(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT14)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT14. -#define BF_DMA_INT_INT14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT14), uint32_t) & BM_DMA_INT_INT14) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT14 field to a new value. -#define BW_DMA_INT_INT14(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT14) = (v)) -#endif -//@} - -/*! - * @name Register DMA_INT, field INT15[15] (W1C) - * - * Values: - * - 0 - The interrupt request for corresponding channel is cleared - * - 1 - The interrupt request for corresponding channel is active - */ -//@{ -#define BP_DMA_INT_INT15 (15U) //!< Bit position for DMA_INT_INT15. -#define BM_DMA_INT_INT15 (0x00008000U) //!< Bit mask for DMA_INT_INT15. -#define BS_DMA_INT_INT15 (1U) //!< Bit field size in bits for DMA_INT_INT15. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_INT_INT15 field. -#define BR_DMA_INT_INT15(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT15)) -#endif - -//! @brief Format value for bitfield DMA_INT_INT15. -#define BF_DMA_INT_INT15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT15), uint32_t) & BM_DMA_INT_INT15) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INT15 field to a new value. -#define BW_DMA_INT_INT15(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT15) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_ERR - Error Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_ERR - Error Register (RW) - * - * Reset value: 0x00000000U - * - * The ERR provides a bit map for the 16 channels, signaling the presence of an - * error for each channel. The eDMA engine signals the occurrence of an error - * condition by setting the appropriate bit in this register. The outputs of this - * register are enabled by the contents of the EEI, and then routed to the - * interrupt controller. During the execution of the interrupt-service routine associated - * with any DMA errors, it is software's responsibility to clear the appropriate - * bit, negating the error-interrupt request. Typically, a write to the CERR in - * the interrupt-service routine is used for this purpose. The normal DMA channel - * completion indicators (setting the transfer control descriptor DONE flag and - * the possible assertion of an interrupt request) are not affected when an error - * is detected. The contents of this register can also be polled because a - * non-zero value indicates the presence of a channel error regardless of the state of - * the EEI. The state of any given channel's error indicators is affected by - * writes to this register; it is also affected by writes to the CERR. On writes to - * the ERR, a one in any bit position clears the corresponding channel's error - * status. A zero in any bit position has no affect on the corresponding channel's - * current error status. The CERR is provided so the error indicator for a single - * channel can easily be cleared. - */ -typedef union _hw_dma_err -{ - uint32_t U; - struct _hw_dma_err_bitfields - { - uint32_t ERR0 : 1; //!< [0] Error In Channel 0 - uint32_t ERR1 : 1; //!< [1] Error In Channel 1 - uint32_t ERR2 : 1; //!< [2] Error In Channel 2 - uint32_t ERR3 : 1; //!< [3] Error In Channel 3 - uint32_t ERR4 : 1; //!< [4] Error In Channel 4 - uint32_t ERR5 : 1; //!< [5] Error In Channel 5 - uint32_t ERR6 : 1; //!< [6] Error In Channel 6 - uint32_t ERR7 : 1; //!< [7] Error In Channel 7 - uint32_t ERR8 : 1; //!< [8] Error In Channel 8 - uint32_t ERR9 : 1; //!< [9] Error In Channel 9 - uint32_t ERR10 : 1; //!< [10] Error In Channel 10 - uint32_t ERR11 : 1; //!< [11] Error In Channel 11 - uint32_t ERR12 : 1; //!< [12] Error In Channel 12 - uint32_t ERR13 : 1; //!< [13] Error In Channel 13 - uint32_t ERR14 : 1; //!< [14] Error In Channel 14 - uint32_t ERR15 : 1; //!< [15] Error In Channel 15 - uint32_t RESERVED0 : 16; //!< [31:16] - } B; -} hw_dma_err_t; -#endif - -/*! - * @name Constants and macros for entire DMA_ERR register - */ -//@{ -#define HW_DMA_ERR_ADDR(x) (REGS_DMA_BASE(x) + 0x2CU) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_ERR(x) (*(__IO hw_dma_err_t *) HW_DMA_ERR_ADDR(x)) -#define HW_DMA_ERR_RD(x) (HW_DMA_ERR(x).U) -#define HW_DMA_ERR_WR(x, v) (HW_DMA_ERR(x).U = (v)) -#define HW_DMA_ERR_SET(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) | (v))) -#define HW_DMA_ERR_CLR(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) & ~(v))) -#define HW_DMA_ERR_TOG(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_ERR bitfields - */ - -/*! - * @name Register DMA_ERR, field ERR0[0] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR0 (0U) //!< Bit position for DMA_ERR_ERR0. -#define BM_DMA_ERR_ERR0 (0x00000001U) //!< Bit mask for DMA_ERR_ERR0. -#define BS_DMA_ERR_ERR0 (1U) //!< Bit field size in bits for DMA_ERR_ERR0. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR0 field. -#define BR_DMA_ERR_ERR0(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR0)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR0. -#define BF_DMA_ERR_ERR0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR0), uint32_t) & BM_DMA_ERR_ERR0) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR0 field to a new value. -#define BW_DMA_ERR_ERR0(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR0) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR1[1] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR1 (1U) //!< Bit position for DMA_ERR_ERR1. -#define BM_DMA_ERR_ERR1 (0x00000002U) //!< Bit mask for DMA_ERR_ERR1. -#define BS_DMA_ERR_ERR1 (1U) //!< Bit field size in bits for DMA_ERR_ERR1. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR1 field. -#define BR_DMA_ERR_ERR1(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR1)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR1. -#define BF_DMA_ERR_ERR1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR1), uint32_t) & BM_DMA_ERR_ERR1) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR1 field to a new value. -#define BW_DMA_ERR_ERR1(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR1) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR2[2] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR2 (2U) //!< Bit position for DMA_ERR_ERR2. -#define BM_DMA_ERR_ERR2 (0x00000004U) //!< Bit mask for DMA_ERR_ERR2. -#define BS_DMA_ERR_ERR2 (1U) //!< Bit field size in bits for DMA_ERR_ERR2. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR2 field. -#define BR_DMA_ERR_ERR2(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR2)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR2. -#define BF_DMA_ERR_ERR2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR2), uint32_t) & BM_DMA_ERR_ERR2) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR2 field to a new value. -#define BW_DMA_ERR_ERR2(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR2) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR3[3] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR3 (3U) //!< Bit position for DMA_ERR_ERR3. -#define BM_DMA_ERR_ERR3 (0x00000008U) //!< Bit mask for DMA_ERR_ERR3. -#define BS_DMA_ERR_ERR3 (1U) //!< Bit field size in bits for DMA_ERR_ERR3. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR3 field. -#define BR_DMA_ERR_ERR3(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR3)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR3. -#define BF_DMA_ERR_ERR3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR3), uint32_t) & BM_DMA_ERR_ERR3) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR3 field to a new value. -#define BW_DMA_ERR_ERR3(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR3) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR4[4] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR4 (4U) //!< Bit position for DMA_ERR_ERR4. -#define BM_DMA_ERR_ERR4 (0x00000010U) //!< Bit mask for DMA_ERR_ERR4. -#define BS_DMA_ERR_ERR4 (1U) //!< Bit field size in bits for DMA_ERR_ERR4. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR4 field. -#define BR_DMA_ERR_ERR4(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR4)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR4. -#define BF_DMA_ERR_ERR4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR4), uint32_t) & BM_DMA_ERR_ERR4) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR4 field to a new value. -#define BW_DMA_ERR_ERR4(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR4) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR5[5] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR5 (5U) //!< Bit position for DMA_ERR_ERR5. -#define BM_DMA_ERR_ERR5 (0x00000020U) //!< Bit mask for DMA_ERR_ERR5. -#define BS_DMA_ERR_ERR5 (1U) //!< Bit field size in bits for DMA_ERR_ERR5. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR5 field. -#define BR_DMA_ERR_ERR5(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR5)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR5. -#define BF_DMA_ERR_ERR5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR5), uint32_t) & BM_DMA_ERR_ERR5) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR5 field to a new value. -#define BW_DMA_ERR_ERR5(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR5) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR6[6] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR6 (6U) //!< Bit position for DMA_ERR_ERR6. -#define BM_DMA_ERR_ERR6 (0x00000040U) //!< Bit mask for DMA_ERR_ERR6. -#define BS_DMA_ERR_ERR6 (1U) //!< Bit field size in bits for DMA_ERR_ERR6. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR6 field. -#define BR_DMA_ERR_ERR6(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR6)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR6. -#define BF_DMA_ERR_ERR6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR6), uint32_t) & BM_DMA_ERR_ERR6) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR6 field to a new value. -#define BW_DMA_ERR_ERR6(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR6) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR7[7] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR7 (7U) //!< Bit position for DMA_ERR_ERR7. -#define BM_DMA_ERR_ERR7 (0x00000080U) //!< Bit mask for DMA_ERR_ERR7. -#define BS_DMA_ERR_ERR7 (1U) //!< Bit field size in bits for DMA_ERR_ERR7. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR7 field. -#define BR_DMA_ERR_ERR7(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR7)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR7. -#define BF_DMA_ERR_ERR7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR7), uint32_t) & BM_DMA_ERR_ERR7) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR7 field to a new value. -#define BW_DMA_ERR_ERR7(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR7) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR8[8] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR8 (8U) //!< Bit position for DMA_ERR_ERR8. -#define BM_DMA_ERR_ERR8 (0x00000100U) //!< Bit mask for DMA_ERR_ERR8. -#define BS_DMA_ERR_ERR8 (1U) //!< Bit field size in bits for DMA_ERR_ERR8. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR8 field. -#define BR_DMA_ERR_ERR8(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR8)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR8. -#define BF_DMA_ERR_ERR8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR8), uint32_t) & BM_DMA_ERR_ERR8) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR8 field to a new value. -#define BW_DMA_ERR_ERR8(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR8) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR9[9] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR9 (9U) //!< Bit position for DMA_ERR_ERR9. -#define BM_DMA_ERR_ERR9 (0x00000200U) //!< Bit mask for DMA_ERR_ERR9. -#define BS_DMA_ERR_ERR9 (1U) //!< Bit field size in bits for DMA_ERR_ERR9. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR9 field. -#define BR_DMA_ERR_ERR9(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR9)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR9. -#define BF_DMA_ERR_ERR9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR9), uint32_t) & BM_DMA_ERR_ERR9) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR9 field to a new value. -#define BW_DMA_ERR_ERR9(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR9) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR10[10] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR10 (10U) //!< Bit position for DMA_ERR_ERR10. -#define BM_DMA_ERR_ERR10 (0x00000400U) //!< Bit mask for DMA_ERR_ERR10. -#define BS_DMA_ERR_ERR10 (1U) //!< Bit field size in bits for DMA_ERR_ERR10. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR10 field. -#define BR_DMA_ERR_ERR10(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR10)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR10. -#define BF_DMA_ERR_ERR10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR10), uint32_t) & BM_DMA_ERR_ERR10) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR10 field to a new value. -#define BW_DMA_ERR_ERR10(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR10) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR11[11] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR11 (11U) //!< Bit position for DMA_ERR_ERR11. -#define BM_DMA_ERR_ERR11 (0x00000800U) //!< Bit mask for DMA_ERR_ERR11. -#define BS_DMA_ERR_ERR11 (1U) //!< Bit field size in bits for DMA_ERR_ERR11. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR11 field. -#define BR_DMA_ERR_ERR11(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR11)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR11. -#define BF_DMA_ERR_ERR11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR11), uint32_t) & BM_DMA_ERR_ERR11) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR11 field to a new value. -#define BW_DMA_ERR_ERR11(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR11) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR12[12] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR12 (12U) //!< Bit position for DMA_ERR_ERR12. -#define BM_DMA_ERR_ERR12 (0x00001000U) //!< Bit mask for DMA_ERR_ERR12. -#define BS_DMA_ERR_ERR12 (1U) //!< Bit field size in bits for DMA_ERR_ERR12. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR12 field. -#define BR_DMA_ERR_ERR12(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR12)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR12. -#define BF_DMA_ERR_ERR12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR12), uint32_t) & BM_DMA_ERR_ERR12) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR12 field to a new value. -#define BW_DMA_ERR_ERR12(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR12) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR13[13] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR13 (13U) //!< Bit position for DMA_ERR_ERR13. -#define BM_DMA_ERR_ERR13 (0x00002000U) //!< Bit mask for DMA_ERR_ERR13. -#define BS_DMA_ERR_ERR13 (1U) //!< Bit field size in bits for DMA_ERR_ERR13. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR13 field. -#define BR_DMA_ERR_ERR13(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR13)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR13. -#define BF_DMA_ERR_ERR13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR13), uint32_t) & BM_DMA_ERR_ERR13) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR13 field to a new value. -#define BW_DMA_ERR_ERR13(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR13) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR14[14] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR14 (14U) //!< Bit position for DMA_ERR_ERR14. -#define BM_DMA_ERR_ERR14 (0x00004000U) //!< Bit mask for DMA_ERR_ERR14. -#define BS_DMA_ERR_ERR14 (1U) //!< Bit field size in bits for DMA_ERR_ERR14. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR14 field. -#define BR_DMA_ERR_ERR14(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR14)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR14. -#define BF_DMA_ERR_ERR14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR14), uint32_t) & BM_DMA_ERR_ERR14) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR14 field to a new value. -#define BW_DMA_ERR_ERR14(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR14) = (v)) -#endif -//@} - -/*! - * @name Register DMA_ERR, field ERR15[15] (W1C) - * - * Values: - * - 0 - An error in the corresponding channel has not occurred - * - 1 - An error in the corresponding channel has occurred - */ -//@{ -#define BP_DMA_ERR_ERR15 (15U) //!< Bit position for DMA_ERR_ERR15. -#define BM_DMA_ERR_ERR15 (0x00008000U) //!< Bit mask for DMA_ERR_ERR15. -#define BS_DMA_ERR_ERR15 (1U) //!< Bit field size in bits for DMA_ERR_ERR15. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_ERR_ERR15 field. -#define BR_DMA_ERR_ERR15(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR15)) -#endif - -//! @brief Format value for bitfield DMA_ERR_ERR15. -#define BF_DMA_ERR_ERR15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR15), uint32_t) & BM_DMA_ERR_ERR15) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ERR15 field to a new value. -#define BW_DMA_ERR_ERR15(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR15) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_HRS - Hardware Request Status Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_HRS - Hardware Request Status Register (RO) - * - * Reset value: 0x00000000U - * - * The HRS register provides a bit map for the DMA channels, signaling the - * presence of a hardware request for each channel. The hardware request status bits - * reflect the current state of the register and qualified (via the ERQ fields) - * DMA request signals as seen by the DMA's arbitration logic. This view into the - * hardware request signals may be used for debug purposes. These bits reflect the - * state of the request as seen by the arbitration logic. Therefore, this status - * is affected by the ERQ bits. - */ -typedef union _hw_dma_hrs -{ - uint32_t U; - struct _hw_dma_hrs_bitfields - { - uint32_t HRS0 : 1; //!< [0] Hardware Request Status Channel 0 - uint32_t HRS1 : 1; //!< [1] Hardware Request Status Channel 1 - uint32_t HRS2 : 1; //!< [2] Hardware Request Status Channel 2 - uint32_t HRS3 : 1; //!< [3] Hardware Request Status Channel 3 - uint32_t HRS4 : 1; //!< [4] Hardware Request Status Channel 4 - uint32_t HRS5 : 1; //!< [5] Hardware Request Status Channel 5 - uint32_t HRS6 : 1; //!< [6] Hardware Request Status Channel 6 - uint32_t HRS7 : 1; //!< [7] Hardware Request Status Channel 7 - uint32_t HRS8 : 1; //!< [8] Hardware Request Status Channel 8 - uint32_t HRS9 : 1; //!< [9] Hardware Request Status Channel 9 - uint32_t HRS10 : 1; //!< [10] Hardware Request Status Channel 10 - uint32_t HRS11 : 1; //!< [11] Hardware Request Status Channel 11 - uint32_t HRS12 : 1; //!< [12] Hardware Request Status Channel 12 - uint32_t HRS13 : 1; //!< [13] Hardware Request Status Channel 13 - uint32_t HRS14 : 1; //!< [14] Hardware Request Status Channel 14 - uint32_t HRS15 : 1; //!< [15] Hardware Request Status Channel 15 - uint32_t RESERVED0 : 16; //!< [31:16] Reserved - } B; -} hw_dma_hrs_t; -#endif - -/*! - * @name Constants and macros for entire DMA_HRS register - */ -//@{ -#define HW_DMA_HRS_ADDR(x) (REGS_DMA_BASE(x) + 0x34U) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_HRS(x) (*(__I hw_dma_hrs_t *) HW_DMA_HRS_ADDR(x)) -#define HW_DMA_HRS_RD(x) (HW_DMA_HRS(x).U) -#endif -//@} - -/* - * Constants & macros for individual DMA_HRS bitfields - */ - -/*! - * @name Register DMA_HRS, field HRS0[0] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 0 is not present - * - 1 - A hardware service request for channel 0 is present - */ -//@{ -#define BP_DMA_HRS_HRS0 (0U) //!< Bit position for DMA_HRS_HRS0. -#define BM_DMA_HRS_HRS0 (0x00000001U) //!< Bit mask for DMA_HRS_HRS0. -#define BS_DMA_HRS_HRS0 (1U) //!< Bit field size in bits for DMA_HRS_HRS0. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS0 field. -#define BR_DMA_HRS_HRS0(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS0)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS1[1] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 1 is not present - * - 1 - A hardware service request for channel 1 is present - */ -//@{ -#define BP_DMA_HRS_HRS1 (1U) //!< Bit position for DMA_HRS_HRS1. -#define BM_DMA_HRS_HRS1 (0x00000002U) //!< Bit mask for DMA_HRS_HRS1. -#define BS_DMA_HRS_HRS1 (1U) //!< Bit field size in bits for DMA_HRS_HRS1. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS1 field. -#define BR_DMA_HRS_HRS1(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS1)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS2[2] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 2 is not present - * - 1 - A hardware service request for channel 2 is present - */ -//@{ -#define BP_DMA_HRS_HRS2 (2U) //!< Bit position for DMA_HRS_HRS2. -#define BM_DMA_HRS_HRS2 (0x00000004U) //!< Bit mask for DMA_HRS_HRS2. -#define BS_DMA_HRS_HRS2 (1U) //!< Bit field size in bits for DMA_HRS_HRS2. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS2 field. -#define BR_DMA_HRS_HRS2(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS2)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS3[3] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 3 is not present - * - 1 - A hardware service request for channel 3 is present - */ -//@{ -#define BP_DMA_HRS_HRS3 (3U) //!< Bit position for DMA_HRS_HRS3. -#define BM_DMA_HRS_HRS3 (0x00000008U) //!< Bit mask for DMA_HRS_HRS3. -#define BS_DMA_HRS_HRS3 (1U) //!< Bit field size in bits for DMA_HRS_HRS3. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS3 field. -#define BR_DMA_HRS_HRS3(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS3)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS4[4] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 4 is not present - * - 1 - A hardware service request for channel 4 is present - */ -//@{ -#define BP_DMA_HRS_HRS4 (4U) //!< Bit position for DMA_HRS_HRS4. -#define BM_DMA_HRS_HRS4 (0x00000010U) //!< Bit mask for DMA_HRS_HRS4. -#define BS_DMA_HRS_HRS4 (1U) //!< Bit field size in bits for DMA_HRS_HRS4. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS4 field. -#define BR_DMA_HRS_HRS4(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS4)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS5[5] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 5 is not present - * - 1 - A hardware service request for channel 5 is present - */ -//@{ -#define BP_DMA_HRS_HRS5 (5U) //!< Bit position for DMA_HRS_HRS5. -#define BM_DMA_HRS_HRS5 (0x00000020U) //!< Bit mask for DMA_HRS_HRS5. -#define BS_DMA_HRS_HRS5 (1U) //!< Bit field size in bits for DMA_HRS_HRS5. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS5 field. -#define BR_DMA_HRS_HRS5(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS5)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS6[6] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 6 is not present - * - 1 - A hardware service request for channel 6 is present - */ -//@{ -#define BP_DMA_HRS_HRS6 (6U) //!< Bit position for DMA_HRS_HRS6. -#define BM_DMA_HRS_HRS6 (0x00000040U) //!< Bit mask for DMA_HRS_HRS6. -#define BS_DMA_HRS_HRS6 (1U) //!< Bit field size in bits for DMA_HRS_HRS6. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS6 field. -#define BR_DMA_HRS_HRS6(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS6)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS7[7] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 7 is not present - * - 1 - A hardware service request for channel 7 is present - */ -//@{ -#define BP_DMA_HRS_HRS7 (7U) //!< Bit position for DMA_HRS_HRS7. -#define BM_DMA_HRS_HRS7 (0x00000080U) //!< Bit mask for DMA_HRS_HRS7. -#define BS_DMA_HRS_HRS7 (1U) //!< Bit field size in bits for DMA_HRS_HRS7. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS7 field. -#define BR_DMA_HRS_HRS7(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS7)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS8[8] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 8 is not present - * - 1 - A hardware service request for channel 8 is present - */ -//@{ -#define BP_DMA_HRS_HRS8 (8U) //!< Bit position for DMA_HRS_HRS8. -#define BM_DMA_HRS_HRS8 (0x00000100U) //!< Bit mask for DMA_HRS_HRS8. -#define BS_DMA_HRS_HRS8 (1U) //!< Bit field size in bits for DMA_HRS_HRS8. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS8 field. -#define BR_DMA_HRS_HRS8(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS8)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS9[9] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 9 is not present - * - 1 - A hardware service request for channel 9 is present - */ -//@{ -#define BP_DMA_HRS_HRS9 (9U) //!< Bit position for DMA_HRS_HRS9. -#define BM_DMA_HRS_HRS9 (0x00000200U) //!< Bit mask for DMA_HRS_HRS9. -#define BS_DMA_HRS_HRS9 (1U) //!< Bit field size in bits for DMA_HRS_HRS9. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS9 field. -#define BR_DMA_HRS_HRS9(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS9)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS10[10] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 10 is not present - * - 1 - A hardware service request for channel 10 is present - */ -//@{ -#define BP_DMA_HRS_HRS10 (10U) //!< Bit position for DMA_HRS_HRS10. -#define BM_DMA_HRS_HRS10 (0x00000400U) //!< Bit mask for DMA_HRS_HRS10. -#define BS_DMA_HRS_HRS10 (1U) //!< Bit field size in bits for DMA_HRS_HRS10. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS10 field. -#define BR_DMA_HRS_HRS10(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS10)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS11[11] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 11 is not present - * - 1 - A hardware service request for channel 11 is present - */ -//@{ -#define BP_DMA_HRS_HRS11 (11U) //!< Bit position for DMA_HRS_HRS11. -#define BM_DMA_HRS_HRS11 (0x00000800U) //!< Bit mask for DMA_HRS_HRS11. -#define BS_DMA_HRS_HRS11 (1U) //!< Bit field size in bits for DMA_HRS_HRS11. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS11 field. -#define BR_DMA_HRS_HRS11(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS11)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS12[12] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 12 is not present - * - 1 - A hardware service request for channel 12 is present - */ -//@{ -#define BP_DMA_HRS_HRS12 (12U) //!< Bit position for DMA_HRS_HRS12. -#define BM_DMA_HRS_HRS12 (0x00001000U) //!< Bit mask for DMA_HRS_HRS12. -#define BS_DMA_HRS_HRS12 (1U) //!< Bit field size in bits for DMA_HRS_HRS12. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS12 field. -#define BR_DMA_HRS_HRS12(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS12)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS13[13] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 13 is not present - * - 1 - A hardware service request for channel 13 is present - */ -//@{ -#define BP_DMA_HRS_HRS13 (13U) //!< Bit position for DMA_HRS_HRS13. -#define BM_DMA_HRS_HRS13 (0x00002000U) //!< Bit mask for DMA_HRS_HRS13. -#define BS_DMA_HRS_HRS13 (1U) //!< Bit field size in bits for DMA_HRS_HRS13. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS13 field. -#define BR_DMA_HRS_HRS13(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS13)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS14[14] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 14 is not present - * - 1 - A hardware service request for channel 14 is present - */ -//@{ -#define BP_DMA_HRS_HRS14 (14U) //!< Bit position for DMA_HRS_HRS14. -#define BM_DMA_HRS_HRS14 (0x00004000U) //!< Bit mask for DMA_HRS_HRS14. -#define BS_DMA_HRS_HRS14 (1U) //!< Bit field size in bits for DMA_HRS_HRS14. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS14 field. -#define BR_DMA_HRS_HRS14(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS14)) -#endif -//@} - -/*! - * @name Register DMA_HRS, field HRS15[15] (RO) - * - * The HRS bit for its respective channel remains asserted for the period when a - * Hardware Request is Present on the Channel. After the Request is completed - * and Channel is free , the HRS bit is automatically cleared by hardware. - * - * Values: - * - 0 - A hardware service request for channel 15 is not present - * - 1 - A hardware service request for channel 15 is present - */ -//@{ -#define BP_DMA_HRS_HRS15 (15U) //!< Bit position for DMA_HRS_HRS15. -#define BM_DMA_HRS_HRS15 (0x00008000U) //!< Bit mask for DMA_HRS_HRS15. -#define BS_DMA_HRS_HRS15 (1U) //!< Bit field size in bits for DMA_HRS_HRS15. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_HRS_HRS15 field. -#define BR_DMA_HRS_HRS15(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS15)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_DCHPRIn - Channel n Priority Register -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_DCHPRIn - Channel n Priority Register (RW) - * - * Reset value: 0x00U - * - * When fixed-priority channel arbitration is enabled (CR[ERCA] = 0), the - * contents of these registers define the unique priorities associated with each - * channel . The channel priorities are evaluated by numeric value; for example, 0 is - * the lowest priority, 1 is the next priority, then 2, 3, etc. Software must - * program the channel priorities with unique values; otherwise, a configuration - * error is reported. The range of the priority value is limited to the values of 0 - * through 15. - */ -typedef union _hw_dma_dchprin -{ - uint8_t U; - struct _hw_dma_dchprin_bitfields - { - uint8_t CHPRI : 4; //!< [3:0] Channel n Arbitration Priority - uint8_t RESERVED0 : 2; //!< [5:4] - uint8_t DPA : 1; //!< [6] Disable Preempt Ability - uint8_t ECP : 1; //!< [7] Enable Channel Preemption - } B; -} hw_dma_dchprin_t; -#endif - -/*! - * @name Constants and macros for entire DMA_DCHPRIn register - */ -//@{ -#define HW_DMA_DCHPRIn_COUNT (16U) - -#define HW_DMA_DCHPRIn_ADDR(x, n) (REGS_DMA_BASE(x) + 0x100U + (0x1U * n)) - -/* DMA channel index to DMA channel priority register array index conversion macro */ -#define HW_DMA_DCHPRIn_CHANNEL(n) (((n) & ~0x03U) | (3 - ((n) & 0x03U))) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_DCHPRIn(x, n) (*(__IO hw_dma_dchprin_t *) HW_DMA_DCHPRIn_ADDR(x, n)) -#define HW_DMA_DCHPRIn_RD(x, n) (HW_DMA_DCHPRIn(x, n).U) -#define HW_DMA_DCHPRIn_WR(x, n, v) (HW_DMA_DCHPRIn(x, n).U = (v)) -#define HW_DMA_DCHPRIn_SET(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) | (v))) -#define HW_DMA_DCHPRIn_CLR(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) & ~(v))) -#define HW_DMA_DCHPRIn_TOG(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_DCHPRIn bitfields - */ - -/*! - * @name Register DMA_DCHPRIn, field CHPRI[3:0] (RW) - * - * Channel priority when fixed-priority arbitration is enabled Reset value for - * the channel priority fields, CHPRI, is equal to the corresponding channel - * number for each priority register, i.e., DCHPRI15[CHPRI] equals 0b1111. - */ -//@{ -#define BP_DMA_DCHPRIn_CHPRI (0U) //!< Bit position for DMA_DCHPRIn_CHPRI. -#define BM_DMA_DCHPRIn_CHPRI (0x0FU) //!< Bit mask for DMA_DCHPRIn_CHPRI. -#define BS_DMA_DCHPRIn_CHPRI (4U) //!< Bit field size in bits for DMA_DCHPRIn_CHPRI. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_DCHPRIn_CHPRI field. -#define BR_DMA_DCHPRIn_CHPRI(x, n) (HW_DMA_DCHPRIn(x, n).B.CHPRI) -#endif - -//! @brief Format value for bitfield DMA_DCHPRIn_CHPRI. -#define BF_DMA_DCHPRIn_CHPRI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_DCHPRIn_CHPRI), uint8_t) & BM_DMA_DCHPRIn_CHPRI) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CHPRI field to a new value. -#define BW_DMA_DCHPRIn_CHPRI(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, (HW_DMA_DCHPRIn_RD(x, n) & ~BM_DMA_DCHPRIn_CHPRI) | BF_DMA_DCHPRIn_CHPRI(v))) -#endif -//@} - -/*! - * @name Register DMA_DCHPRIn, field DPA[6] (RW) - * - * Values: - * - 0 - Channel n can suspend a lower priority channel - * - 1 - Channel n cannot suspend any channel, regardless of channel priority - */ -//@{ -#define BP_DMA_DCHPRIn_DPA (6U) //!< Bit position for DMA_DCHPRIn_DPA. -#define BM_DMA_DCHPRIn_DPA (0x40U) //!< Bit mask for DMA_DCHPRIn_DPA. -#define BS_DMA_DCHPRIn_DPA (1U) //!< Bit field size in bits for DMA_DCHPRIn_DPA. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_DCHPRIn_DPA field. -#define BR_DMA_DCHPRIn_DPA(x, n) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_DPA)) -#endif - -//! @brief Format value for bitfield DMA_DCHPRIn_DPA. -#define BF_DMA_DCHPRIn_DPA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_DCHPRIn_DPA), uint8_t) & BM_DMA_DCHPRIn_DPA) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DPA field to a new value. -#define BW_DMA_DCHPRIn_DPA(x, n, v) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_DPA) = (v)) -#endif -//@} - -/*! - * @name Register DMA_DCHPRIn, field ECP[7] (RW) - * - * Values: - * - 0 - Channel n cannot be suspended by a higher priority channel's service - * request - * - 1 - Channel n can be temporarily suspended by the service request of a - * higher priority channel - */ -//@{ -#define BP_DMA_DCHPRIn_ECP (7U) //!< Bit position for DMA_DCHPRIn_ECP. -#define BM_DMA_DCHPRIn_ECP (0x80U) //!< Bit mask for DMA_DCHPRIn_ECP. -#define BS_DMA_DCHPRIn_ECP (1U) //!< Bit field size in bits for DMA_DCHPRIn_ECP. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_DCHPRIn_ECP field. -#define BR_DMA_DCHPRIn_ECP(x, n) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_ECP)) -#endif - -//! @brief Format value for bitfield DMA_DCHPRIn_ECP. -#define BF_DMA_DCHPRIn_ECP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_DCHPRIn_ECP), uint8_t) & BM_DMA_DCHPRIn_ECP) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ECP field to a new value. -#define BW_DMA_DCHPRIn_ECP(x, n, v) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_ECP) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_SADDR - TCD Source Address -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_SADDR - TCD Source Address (RW) - * - * Reset value: 0x00000000U - */ -typedef union _hw_dma_tcdn_saddr -{ - uint32_t U; - struct _hw_dma_tcdn_saddr_bitfields - { - uint32_t SADDR : 32; //!< [31:0] Source Address - } B; -} hw_dma_tcdn_saddr_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_SADDR register - */ -//@{ -#define HW_DMA_TCDn_SADDR_COUNT (16U) - -#define HW_DMA_TCDn_SADDR_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1000U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_SADDR(x, n) (*(__IO hw_dma_tcdn_saddr_t *) HW_DMA_TCDn_SADDR_ADDR(x, n)) -#define HW_DMA_TCDn_SADDR_RD(x, n) (HW_DMA_TCDn_SADDR(x, n).U) -#define HW_DMA_TCDn_SADDR_WR(x, n, v) (HW_DMA_TCDn_SADDR(x, n).U = (v)) -#define HW_DMA_TCDn_SADDR_SET(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) | (v))) -#define HW_DMA_TCDn_SADDR_CLR(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_SADDR_TOG(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_SADDR bitfields - */ - -/*! - * @name Register DMA_TCDn_SADDR, field SADDR[31:0] (RW) - * - * Memory address pointing to the source data. - */ -//@{ -#define BP_DMA_TCDn_SADDR_SADDR (0U) //!< Bit position for DMA_TCDn_SADDR_SADDR. -#define BM_DMA_TCDn_SADDR_SADDR (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_SADDR_SADDR. -#define BS_DMA_TCDn_SADDR_SADDR (32U) //!< Bit field size in bits for DMA_TCDn_SADDR_SADDR. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_SADDR_SADDR field. -#define BR_DMA_TCDn_SADDR_SADDR(x, n) (HW_DMA_TCDn_SADDR(x, n).U) -#endif - -//! @brief Format value for bitfield DMA_TCDn_SADDR_SADDR. -#define BF_DMA_TCDn_SADDR_SADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_SADDR_SADDR), uint32_t) & BM_DMA_TCDn_SADDR_SADDR) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SADDR field to a new value. -#define BW_DMA_TCDn_SADDR_SADDR(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset (RW) - * - * Reset value: 0x0000U - */ -typedef union _hw_dma_tcdn_soff -{ - uint16_t U; - struct _hw_dma_tcdn_soff_bitfields - { - uint16_t SOFF : 16; //!< [15:0] Source address signed offset - } B; -} hw_dma_tcdn_soff_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_SOFF register - */ -//@{ -#define HW_DMA_TCDn_SOFF_COUNT (16U) - -#define HW_DMA_TCDn_SOFF_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1004U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_SOFF(x, n) (*(__IO hw_dma_tcdn_soff_t *) HW_DMA_TCDn_SOFF_ADDR(x, n)) -#define HW_DMA_TCDn_SOFF_RD(x, n) (HW_DMA_TCDn_SOFF(x, n).U) -#define HW_DMA_TCDn_SOFF_WR(x, n, v) (HW_DMA_TCDn_SOFF(x, n).U = (v)) -#define HW_DMA_TCDn_SOFF_SET(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) | (v))) -#define HW_DMA_TCDn_SOFF_CLR(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_SOFF_TOG(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_SOFF bitfields - */ - -/*! - * @name Register DMA_TCDn_SOFF, field SOFF[15:0] (RW) - * - * Sign-extended offset applied to the current source address to form the - * next-state value as each source read is completed. - */ -//@{ -#define BP_DMA_TCDn_SOFF_SOFF (0U) //!< Bit position for DMA_TCDn_SOFF_SOFF. -#define BM_DMA_TCDn_SOFF_SOFF (0xFFFFU) //!< Bit mask for DMA_TCDn_SOFF_SOFF. -#define BS_DMA_TCDn_SOFF_SOFF (16U) //!< Bit field size in bits for DMA_TCDn_SOFF_SOFF. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_SOFF_SOFF field. -#define BR_DMA_TCDn_SOFF_SOFF(x, n) (HW_DMA_TCDn_SOFF(x, n).U) -#endif - -//! @brief Format value for bitfield DMA_TCDn_SOFF_SOFF. -#define BF_DMA_TCDn_SOFF_SOFF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_SOFF_SOFF), uint16_t) & BM_DMA_TCDn_SOFF_SOFF) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SOFF field to a new value. -#define BW_DMA_TCDn_SOFF_SOFF(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_ATTR - TCD Transfer Attributes -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_ATTR - TCD Transfer Attributes (RW) - * - * Reset value: 0x0000U - */ -typedef union _hw_dma_tcdn_attr -{ - uint16_t U; - struct _hw_dma_tcdn_attr_bitfields - { - uint16_t DSIZE : 3; //!< [2:0] Destination Data Transfer Size - uint16_t DMOD : 5; //!< [7:3] Destination Address Modulo - uint16_t SSIZE : 3; //!< [10:8] Source data transfer size - uint16_t SMOD : 5; //!< [15:11] Source Address Modulo. - } B; -} hw_dma_tcdn_attr_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_ATTR register - */ -//@{ -#define HW_DMA_TCDn_ATTR_COUNT (16U) - -#define HW_DMA_TCDn_ATTR_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1006U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_ATTR(x, n) (*(__IO hw_dma_tcdn_attr_t *) HW_DMA_TCDn_ATTR_ADDR(x, n)) -#define HW_DMA_TCDn_ATTR_RD(x, n) (HW_DMA_TCDn_ATTR(x, n).U) -#define HW_DMA_TCDn_ATTR_WR(x, n, v) (HW_DMA_TCDn_ATTR(x, n).U = (v)) -#define HW_DMA_TCDn_ATTR_SET(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) | (v))) -#define HW_DMA_TCDn_ATTR_CLR(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_ATTR_TOG(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_ATTR bitfields - */ - -/*! - * @name Register DMA_TCDn_ATTR, field DSIZE[2:0] (RW) - * - * See the SSIZE definition - */ -//@{ -#define BP_DMA_TCDn_ATTR_DSIZE (0U) //!< Bit position for DMA_TCDn_ATTR_DSIZE. -#define BM_DMA_TCDn_ATTR_DSIZE (0x0007U) //!< Bit mask for DMA_TCDn_ATTR_DSIZE. -#define BS_DMA_TCDn_ATTR_DSIZE (3U) //!< Bit field size in bits for DMA_TCDn_ATTR_DSIZE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_ATTR_DSIZE field. -#define BR_DMA_TCDn_ATTR_DSIZE(x, n) (HW_DMA_TCDn_ATTR(x, n).B.DSIZE) -#endif - -//! @brief Format value for bitfield DMA_TCDn_ATTR_DSIZE. -#define BF_DMA_TCDn_ATTR_DSIZE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_ATTR_DSIZE), uint16_t) & BM_DMA_TCDn_ATTR_DSIZE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DSIZE field to a new value. -#define BW_DMA_TCDn_ATTR_DSIZE(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_DSIZE) | BF_DMA_TCDn_ATTR_DSIZE(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_ATTR, field DMOD[7:3] (RW) - * - * See the SMOD definition - */ -//@{ -#define BP_DMA_TCDn_ATTR_DMOD (3U) //!< Bit position for DMA_TCDn_ATTR_DMOD. -#define BM_DMA_TCDn_ATTR_DMOD (0x00F8U) //!< Bit mask for DMA_TCDn_ATTR_DMOD. -#define BS_DMA_TCDn_ATTR_DMOD (5U) //!< Bit field size in bits for DMA_TCDn_ATTR_DMOD. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_ATTR_DMOD field. -#define BR_DMA_TCDn_ATTR_DMOD(x, n) (HW_DMA_TCDn_ATTR(x, n).B.DMOD) -#endif - -//! @brief Format value for bitfield DMA_TCDn_ATTR_DMOD. -#define BF_DMA_TCDn_ATTR_DMOD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_ATTR_DMOD), uint16_t) & BM_DMA_TCDn_ATTR_DMOD) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DMOD field to a new value. -#define BW_DMA_TCDn_ATTR_DMOD(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_DMOD) | BF_DMA_TCDn_ATTR_DMOD(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_ATTR, field SSIZE[10:8] (RW) - * - * The attempted use of a Reserved encoding causes a configuration error. - * - * Values: - * - 000 - 8-bit - * - 001 - 16-bit - * - 010 - 32-bit - * - 011 - Reserved - * - 100 - 16-byte - * - 101 - 32-byte - * - 110 - Reserved - * - 111 - Reserved - */ -//@{ -#define BP_DMA_TCDn_ATTR_SSIZE (8U) //!< Bit position for DMA_TCDn_ATTR_SSIZE. -#define BM_DMA_TCDn_ATTR_SSIZE (0x0700U) //!< Bit mask for DMA_TCDn_ATTR_SSIZE. -#define BS_DMA_TCDn_ATTR_SSIZE (3U) //!< Bit field size in bits for DMA_TCDn_ATTR_SSIZE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_ATTR_SSIZE field. -#define BR_DMA_TCDn_ATTR_SSIZE(x, n) (HW_DMA_TCDn_ATTR(x, n).B.SSIZE) -#endif - -//! @brief Format value for bitfield DMA_TCDn_ATTR_SSIZE. -#define BF_DMA_TCDn_ATTR_SSIZE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_ATTR_SSIZE), uint16_t) & BM_DMA_TCDn_ATTR_SSIZE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SSIZE field to a new value. -#define BW_DMA_TCDn_ATTR_SSIZE(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_SSIZE) | BF_DMA_TCDn_ATTR_SSIZE(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_ATTR, field SMOD[15:11] (RW) - * - * Values: - * - 0 - Source address modulo feature is disabled - */ -//@{ -#define BP_DMA_TCDn_ATTR_SMOD (11U) //!< Bit position for DMA_TCDn_ATTR_SMOD. -#define BM_DMA_TCDn_ATTR_SMOD (0xF800U) //!< Bit mask for DMA_TCDn_ATTR_SMOD. -#define BS_DMA_TCDn_ATTR_SMOD (5U) //!< Bit field size in bits for DMA_TCDn_ATTR_SMOD. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_ATTR_SMOD field. -#define BR_DMA_TCDn_ATTR_SMOD(x, n) (HW_DMA_TCDn_ATTR(x, n).B.SMOD) -#endif - -//! @brief Format value for bitfield DMA_TCDn_ATTR_SMOD. -#define BF_DMA_TCDn_ATTR_SMOD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_ATTR_SMOD), uint16_t) & BM_DMA_TCDn_ATTR_SMOD) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SMOD field to a new value. -#define BW_DMA_TCDn_ATTR_SMOD(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_SMOD) | BF_DMA_TCDn_ATTR_SMOD(v))) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled) -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled) (RW) - * - * Reset value: 0x00000000U - * - * This register, or one of the next two registers (TCD_NBYTES_MLOFFNO, - * TCD_NBYTES_MLOFFYES), defines the number of bytes to transfer per request. Which - * register to use depends on whether minor loop mapping is disabled, enabled but not - * used for this channel, or enabled and used. TCD word 2 is defined as follows - * if: Minor loop mapping is disabled (CR[EMLM] = 0) If minor loop mapping is - * enabled, see the TCD_NBYTES_MLOFFNO and TCD_NBYTES_MLOFFYES register descriptions - * for TCD word 2's definition. - */ -typedef union _hw_dma_tcdn_nbytes_mlno -{ - uint32_t U; - struct _hw_dma_tcdn_nbytes_mlno_bitfields - { - uint32_t NBYTES : 32; //!< [31:0] Minor Byte Transfer Count - } B; -} hw_dma_tcdn_nbytes_mlno_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_NBYTES_MLNO register - */ -//@{ -#define HW_DMA_TCDn_NBYTES_MLNO_COUNT (16U) - -#define HW_DMA_TCDn_NBYTES_MLNO_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1008U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_NBYTES_MLNO(x, n) (*(__IO hw_dma_tcdn_nbytes_mlno_t *) HW_DMA_TCDn_NBYTES_MLNO_ADDR(x, n)) -#define HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U) -#define HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U = (v)) -#define HW_DMA_TCDn_NBYTES_MLNO_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) | (v))) -#define HW_DMA_TCDn_NBYTES_MLNO_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_NBYTES_MLNO_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_NBYTES_MLNO bitfields - */ - -/*! - * @name Register DMA_TCDn_NBYTES_MLNO, field NBYTES[31:0] (RW) - * - * Number of bytes to be transferred in each service request of the channel. As - * a channel activates, the appropriate TCD contents load into the eDMA engine, - * and the appropriate reads and writes perform until the minor byte transfer - * count has transferred. This is an indivisible operation and cannot be halted. - * (Although, it may be stalled by using the bandwidth control field, or via - * preemption.) After the minor count is exhausted, the SADDR and DADDR values are - * written back into the TCD memory, the major iteration count is decremented and - * restored to the TCD memory. If the major iteration count is completed, additional - * processing is performed. An NBYTES value of 0x0000_0000 is interpreted as a 4 - * GB transfer. - */ -//@{ -#define BP_DMA_TCDn_NBYTES_MLNO_NBYTES (0U) //!< Bit position for DMA_TCDn_NBYTES_MLNO_NBYTES. -#define BM_DMA_TCDn_NBYTES_MLNO_NBYTES (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_NBYTES_MLNO_NBYTES. -#define BS_DMA_TCDn_NBYTES_MLNO_NBYTES (32U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLNO_NBYTES. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_NBYTES_MLNO_NBYTES field. -#define BR_DMA_TCDn_NBYTES_MLNO_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U) -#endif - -//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLNO_NBYTES. -#define BF_DMA_TCDn_NBYTES_MLNO_NBYTES(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLNO_NBYTES), uint32_t) & BM_DMA_TCDn_NBYTES_MLNO_NBYTES) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NBYTES field to a new value. -#define BW_DMA_TCDn_NBYTES_MLNO_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) (RW) - * - * Reset value: 0x00000000U - * - * One of three registers (this register, TCD_NBYTES_MLNO, or - * TCD_NBYTES_MLOFFYES), defines the number of bytes to transfer per request. Which register to use - * depends on whether minor loop mapping is disabled, enabled but not used for - * this channel, or enabled and used. TCD word 2 is defined as follows if: Minor - * loop mapping is enabled (CR[EMLM] = 1) and SMLOE = 0 and DMLOE = 0 If minor - * loop mapping is enabled and SMLOE or DMLOE is set, then refer to the - * TCD_NBYTES_MLOFFYES register description. If minor loop mapping is disabled, then refer to - * the TCD_NBYTES_MLNO register description. - */ -typedef union _hw_dma_tcdn_nbytes_mloffno -{ - uint32_t U; - struct _hw_dma_tcdn_nbytes_mloffno_bitfields - { - uint32_t NBYTES : 30; //!< [29:0] Minor Byte Transfer Count - uint32_t DMLOE : 1; //!< [30] Destination Minor Loop Offset enable - uint32_t SMLOE : 1; //!< [31] Source Minor Loop Offset Enable - } B; -} hw_dma_tcdn_nbytes_mloffno_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_NBYTES_MLOFFNO register - */ -//@{ -#define HW_DMA_TCDn_NBYTES_MLOFFNO_COUNT (16U) - -#define HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1008U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_NBYTES_MLOFFNO(x, n) (*(__IO hw_dma_tcdn_nbytes_mloffno_t *) HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n)) -#define HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).U) -#define HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).U = (v)) -#define HW_DMA_TCDn_NBYTES_MLOFFNO_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) | (v))) -#define HW_DMA_TCDn_NBYTES_MLOFFNO_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_NBYTES_MLOFFNO_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_NBYTES_MLOFFNO bitfields - */ - -/*! - * @name Register DMA_TCDn_NBYTES_MLOFFNO, field NBYTES[29:0] (RW) - * - * Number of bytes to be transferred in each service request of the channel. As - * a channel activates, the appropriate TCD contents load into the eDMA engine, - * and the appropriate reads and writes perform until the minor byte transfer - * count has transferred. This is an indivisible operation and cannot be halted; - * although, it may be stalled by using the bandwidth control field, or via - * preemption. After the minor count is exhausted, the SADDR and DADDR values are written - * back into the TCD memory, the major iteration count is decremented and - * restored to the TCD memory. If the major iteration count is completed, additional - * processing is performed. - */ -//@{ -#define BP_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (0U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_NBYTES. -#define BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (0x3FFFFFFFU) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_NBYTES. -#define BS_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (30U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_NBYTES. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_NBYTES field. -#define BR_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).B.NBYTES) -#endif - -//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_NBYTES. -#define BF_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFNO_NBYTES), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NBYTES field to a new value. -#define BW_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES) | BF_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_NBYTES_MLOFFNO, field DMLOE[30] (RW) - * - * Selects whether the minor loop offset is applied to the destination address - * upon minor loop completion. - * - * Values: - * - 0 - The minor loop offset is not applied to the DADDR - * - 1 - The minor loop offset is applied to the DADDR - */ -//@{ -#define BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (30U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_DMLOE. -#define BM_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (0x40000000U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_DMLOE. -#define BS_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (1U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_DMLOE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_DMLOE field. -#define BR_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_DMLOE. -#define BF_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFNO_DMLOE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DMLOE field to a new value. -#define BW_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_NBYTES_MLOFFNO, field SMLOE[31] (RW) - * - * Selects whether the minor loop offset is applied to the source address upon - * minor loop completion. - * - * Values: - * - 0 - The minor loop offset is not applied to the SADDR - * - 1 - The minor loop offset is applied to the SADDR - */ -//@{ -#define BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (31U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_SMLOE. -#define BM_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (0x80000000U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_SMLOE. -#define BS_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (1U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_SMLOE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_SMLOE field. -#define BR_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_SMLOE. -#define BF_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFNO_SMLOE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SMLOE field to a new value. -#define BW_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE) = (v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) (RW) - * - * Reset value: 0x00000000U - * - * One of three registers (this register, TCD_NBYTES_MLNO, or - * TCD_NBYTES_MLOFFNO), defines the number of bytes to transfer per request. Which register to use - * depends on whether minor loop mapping is disabled, enabled but not used for - * this channel, or enabled and used. TCD word 2 is defined as follows if: Minor - * loop mapping is enabled (CR[EMLM] = 1) and Minor loop offset is enabled (SMLOE - * or DMLOE = 1) If minor loop mapping is enabled and SMLOE and DMLOE are cleared, - * then refer to the TCD_NBYTES_MLOFFNO register description. If minor loop - * mapping is disabled, then refer to the TCD_NBYTES_MLNO register description. - */ -typedef union _hw_dma_tcdn_nbytes_mloffyes -{ - uint32_t U; - struct _hw_dma_tcdn_nbytes_mloffyes_bitfields - { - uint32_t NBYTES : 10; //!< [9:0] Minor Byte Transfer Count - uint32_t MLOFF : 20; //!< [29:10] If SMLOE or DMLOE is set, this - //! field represents a sign-extended offset applied to the source or - //! destination address to form the next-state value after the minor loop completes. - uint32_t DMLOE : 1; //!< [30] Destination Minor Loop Offset enable - uint32_t SMLOE : 1; //!< [31] Source Minor Loop Offset Enable - } B; -} hw_dma_tcdn_nbytes_mloffyes_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_NBYTES_MLOFFYES register - */ -//@{ -#define HW_DMA_TCDn_NBYTES_MLOFFYES_COUNT (16U) - -#define HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1008U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_NBYTES_MLOFFYES(x, n) (*(__IO hw_dma_tcdn_nbytes_mloffyes_t *) HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n)) -#define HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).U) -#define HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).U = (v)) -#define HW_DMA_TCDn_NBYTES_MLOFFYES_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) | (v))) -#define HW_DMA_TCDn_NBYTES_MLOFFYES_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_NBYTES_MLOFFYES_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_NBYTES_MLOFFYES bitfields - */ - -/*! - * @name Register DMA_TCDn_NBYTES_MLOFFYES, field NBYTES[9:0] (RW) - * - * Number of bytes to be transferred in each service request of the channel. As - * a channel activates, the appropriate TCD contents load into the eDMA engine, - * and the appropriate reads and writes perform until the minor byte transfer - * count has transferred. This is an indivisible operation and cannot be halted. - * (Although, it may be stalled by using the bandwidth control field, or via - * preemption.) After the minor count is exhausted, the SADDR and DADDR values are - * written back into the TCD memory, the major iteration count is decremented and - * restored to the TCD memory. If the major iteration count is completed, additional - * processing is performed. - */ -//@{ -#define BP_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (0U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_NBYTES. -#define BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (0x000003FFU) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_NBYTES. -#define BS_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (10U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_NBYTES. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_NBYTES field. -#define BR_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).B.NBYTES) -#endif - -//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_NBYTES. -#define BF_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFYES_NBYTES), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the NBYTES field to a new value. -#define BW_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES) | BF_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_NBYTES_MLOFFYES, field MLOFF[29:10] (RW) - */ -//@{ -#define BP_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (10U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_MLOFF. -#define BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (0x3FFFFC00U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_MLOFF. -#define BS_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (20U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_MLOFF. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_MLOFF field. -#define BR_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).B.MLOFF) -#endif - -//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_MLOFF. -#define BF_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFYES_MLOFF), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the MLOFF field to a new value. -#define BW_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF) | BF_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_NBYTES_MLOFFYES, field DMLOE[30] (RW) - * - * Selects whether the minor loop offset is applied to the destination address - * upon minor loop completion. - * - * Values: - * - 0 - The minor loop offset is not applied to the DADDR - * - 1 - The minor loop offset is applied to the DADDR - */ -//@{ -#define BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (30U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_DMLOE. -#define BM_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (0x40000000U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_DMLOE. -#define BS_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (1U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_DMLOE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_DMLOE field. -#define BR_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_DMLOE. -#define BF_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFYES_DMLOE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DMLOE field to a new value. -#define BW_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_NBYTES_MLOFFYES, field SMLOE[31] (RW) - * - * Selects whether the minor loop offset is applied to the source address upon - * minor loop completion. - * - * Values: - * - 0 - The minor loop offset is not applied to the SADDR - * - 1 - The minor loop offset is applied to the SADDR - */ -//@{ -#define BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (31U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_SMLOE. -#define BM_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (0x80000000U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_SMLOE. -#define BS_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (1U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_SMLOE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_SMLOE field. -#define BR_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_SMLOE. -#define BF_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFYES_SMLOE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SMLOE field to a new value. -#define BW_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE) = (v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment (RW) - * - * Reset value: 0x00000000U - */ -typedef union _hw_dma_tcdn_slast -{ - uint32_t U; - struct _hw_dma_tcdn_slast_bitfields - { - uint32_t SLAST : 32; //!< [31:0] Last source Address Adjustment - } B; -} hw_dma_tcdn_slast_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_SLAST register - */ -//@{ -#define HW_DMA_TCDn_SLAST_COUNT (16U) - -#define HW_DMA_TCDn_SLAST_ADDR(x, n) (REGS_DMA_BASE(x) + 0x100CU + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_SLAST(x, n) (*(__IO hw_dma_tcdn_slast_t *) HW_DMA_TCDn_SLAST_ADDR(x, n)) -#define HW_DMA_TCDn_SLAST_RD(x, n) (HW_DMA_TCDn_SLAST(x, n).U) -#define HW_DMA_TCDn_SLAST_WR(x, n, v) (HW_DMA_TCDn_SLAST(x, n).U = (v)) -#define HW_DMA_TCDn_SLAST_SET(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) | (v))) -#define HW_DMA_TCDn_SLAST_CLR(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_SLAST_TOG(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_SLAST bitfields - */ - -/*! - * @name Register DMA_TCDn_SLAST, field SLAST[31:0] (RW) - * - * Adjustment value added to the source address at the completion of the major - * iteration count. This value can be applied to restore the source address to the - * initial value, or adjust the address to reference the next data structure. - * This register uses two's complement notation; the overflow bit is discarded. - */ -//@{ -#define BP_DMA_TCDn_SLAST_SLAST (0U) //!< Bit position for DMA_TCDn_SLAST_SLAST. -#define BM_DMA_TCDn_SLAST_SLAST (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_SLAST_SLAST. -#define BS_DMA_TCDn_SLAST_SLAST (32U) //!< Bit field size in bits for DMA_TCDn_SLAST_SLAST. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_SLAST_SLAST field. -#define BR_DMA_TCDn_SLAST_SLAST(x, n) (HW_DMA_TCDn_SLAST(x, n).U) -#endif - -//! @brief Format value for bitfield DMA_TCDn_SLAST_SLAST. -#define BF_DMA_TCDn_SLAST_SLAST(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_SLAST_SLAST), uint32_t) & BM_DMA_TCDn_SLAST_SLAST) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the SLAST field to a new value. -#define BW_DMA_TCDn_SLAST_SLAST(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_DADDR - TCD Destination Address -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_DADDR - TCD Destination Address (RW) - * - * Reset value: 0x00000000U - */ -typedef union _hw_dma_tcdn_daddr -{ - uint32_t U; - struct _hw_dma_tcdn_daddr_bitfields - { - uint32_t DADDR : 32; //!< [31:0] Destination Address - } B; -} hw_dma_tcdn_daddr_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_DADDR register - */ -//@{ -#define HW_DMA_TCDn_DADDR_COUNT (16U) - -#define HW_DMA_TCDn_DADDR_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1010U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_DADDR(x, n) (*(__IO hw_dma_tcdn_daddr_t *) HW_DMA_TCDn_DADDR_ADDR(x, n)) -#define HW_DMA_TCDn_DADDR_RD(x, n) (HW_DMA_TCDn_DADDR(x, n).U) -#define HW_DMA_TCDn_DADDR_WR(x, n, v) (HW_DMA_TCDn_DADDR(x, n).U = (v)) -#define HW_DMA_TCDn_DADDR_SET(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) | (v))) -#define HW_DMA_TCDn_DADDR_CLR(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_DADDR_TOG(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_DADDR bitfields - */ - -/*! - * @name Register DMA_TCDn_DADDR, field DADDR[31:0] (RW) - * - * Memory address pointing to the destination data. - */ -//@{ -#define BP_DMA_TCDn_DADDR_DADDR (0U) //!< Bit position for DMA_TCDn_DADDR_DADDR. -#define BM_DMA_TCDn_DADDR_DADDR (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_DADDR_DADDR. -#define BS_DMA_TCDn_DADDR_DADDR (32U) //!< Bit field size in bits for DMA_TCDn_DADDR_DADDR. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_DADDR_DADDR field. -#define BR_DMA_TCDn_DADDR_DADDR(x, n) (HW_DMA_TCDn_DADDR(x, n).U) -#endif - -//! @brief Format value for bitfield DMA_TCDn_DADDR_DADDR. -#define BF_DMA_TCDn_DADDR_DADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_DADDR_DADDR), uint32_t) & BM_DMA_TCDn_DADDR_DADDR) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DADDR field to a new value. -#define BW_DMA_TCDn_DADDR_DADDR(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset (RW) - * - * Reset value: 0x0000U - */ -typedef union _hw_dma_tcdn_doff -{ - uint16_t U; - struct _hw_dma_tcdn_doff_bitfields - { - uint16_t DOFF : 16; //!< [15:0] Destination Address Signed offset - } B; -} hw_dma_tcdn_doff_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_DOFF register - */ -//@{ -#define HW_DMA_TCDn_DOFF_COUNT (16U) - -#define HW_DMA_TCDn_DOFF_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1014U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_DOFF(x, n) (*(__IO hw_dma_tcdn_doff_t *) HW_DMA_TCDn_DOFF_ADDR(x, n)) -#define HW_DMA_TCDn_DOFF_RD(x, n) (HW_DMA_TCDn_DOFF(x, n).U) -#define HW_DMA_TCDn_DOFF_WR(x, n, v) (HW_DMA_TCDn_DOFF(x, n).U = (v)) -#define HW_DMA_TCDn_DOFF_SET(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) | (v))) -#define HW_DMA_TCDn_DOFF_CLR(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_DOFF_TOG(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_DOFF bitfields - */ - -/*! - * @name Register DMA_TCDn_DOFF, field DOFF[15:0] (RW) - * - * Sign-extended offset applied to the current destination address to form the - * next-state value as each destination write is completed. - */ -//@{ -#define BP_DMA_TCDn_DOFF_DOFF (0U) //!< Bit position for DMA_TCDn_DOFF_DOFF. -#define BM_DMA_TCDn_DOFF_DOFF (0xFFFFU) //!< Bit mask for DMA_TCDn_DOFF_DOFF. -#define BS_DMA_TCDn_DOFF_DOFF (16U) //!< Bit field size in bits for DMA_TCDn_DOFF_DOFF. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_DOFF_DOFF field. -#define BR_DMA_TCDn_DOFF_DOFF(x, n) (HW_DMA_TCDn_DOFF(x, n).U) -#endif - -//! @brief Format value for bitfield DMA_TCDn_DOFF_DOFF. -#define BF_DMA_TCDn_DOFF_DOFF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_DOFF_DOFF), uint16_t) & BM_DMA_TCDn_DOFF_DOFF) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DOFF field to a new value. -#define BW_DMA_TCDn_DOFF_DOFF(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) (RW) - * - * Reset value: 0x0000U - * - * If TCDn_CITER[ELINK] is cleared, the TCDn_CITER register is defined as - * follows. - */ -typedef union _hw_dma_tcdn_citer_elinkno -{ - uint16_t U; - struct _hw_dma_tcdn_citer_elinkno_bitfields - { - uint16_t CITER : 15; //!< [14:0] Current Major Iteration Count - uint16_t ELINK : 1; //!< [15] Enable channel-to-channel linking on - //! minor-loop complete - } B; -} hw_dma_tcdn_citer_elinkno_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_CITER_ELINKNO register - */ -//@{ -#define HW_DMA_TCDn_CITER_ELINKNO_COUNT (16U) - -#define HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1016U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_CITER_ELINKNO(x, n) (*(__IO hw_dma_tcdn_citer_elinkno_t *) HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n)) -#define HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) (HW_DMA_TCDn_CITER_ELINKNO(x, n).U) -#define HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO(x, n).U = (v)) -#define HW_DMA_TCDn_CITER_ELINKNO_SET(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) | (v))) -#define HW_DMA_TCDn_CITER_ELINKNO_CLR(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_CITER_ELINKNO_TOG(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_CITER_ELINKNO bitfields - */ - -/*! - * @name Register DMA_TCDn_CITER_ELINKNO, field CITER[14:0] (RW) - * - * This 9-bit (ELINK = 1) or 15-bit (ELINK = 0) count represents the current - * major loop count for the channel. It is decremented each time the minor loop is - * completed and updated in the transfer control descriptor memory. After the - * major iteration count is exhausted, the channel performs a number of operations - * (e.g., final source and destination address calculations), optionally generating - * an interrupt to signal channel completion before reloading the CITER field - * from the beginning iteration count (BITER) field. When the CITER field is - * initially loaded by software, it must be set to the same value as that contained in - * the BITER field. If the channel is configured to execute a single service - * request, the initial values of BITER and CITER should be 0x0001. - */ -//@{ -#define BP_DMA_TCDn_CITER_ELINKNO_CITER (0U) //!< Bit position for DMA_TCDn_CITER_ELINKNO_CITER. -#define BM_DMA_TCDn_CITER_ELINKNO_CITER (0x7FFFU) //!< Bit mask for DMA_TCDn_CITER_ELINKNO_CITER. -#define BS_DMA_TCDn_CITER_ELINKNO_CITER (15U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKNO_CITER. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CITER_ELINKNO_CITER field. -#define BR_DMA_TCDn_CITER_ELINKNO_CITER(x, n) (HW_DMA_TCDn_CITER_ELINKNO(x, n).B.CITER) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKNO_CITER. -#define BF_DMA_TCDn_CITER_ELINKNO_CITER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKNO_CITER), uint16_t) & BM_DMA_TCDn_CITER_ELINKNO_CITER) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CITER field to a new value. -#define BW_DMA_TCDn_CITER_ELINKNO_CITER(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, (HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKNO_CITER) | BF_DMA_TCDn_CITER_ELINKNO_CITER(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CITER_ELINKNO, field ELINK[15] (RW) - * - * As the channel completes the minor loop, this flag enables linking to another - * channel, defined by the LINKCH field. The link target channel initiates a - * channel service request via an internal mechanism that sets the TCDn_CSR[START] - * bit of the specified channel. If channel linking is disabled, the CITER value - * is extended to 15 bits in place of a link channel number. If the major loop is - * exhausted, this link mechanism is suppressed in favor of the MAJORELINK - * channel linking. This bit must be equal to the BITER[ELINK] bit; otherwise, a - * configuration error is reported. - * - * Values: - * - 0 - The channel-to-channel linking is disabled - * - 1 - The channel-to-channel linking is enabled - */ -//@{ -#define BP_DMA_TCDn_CITER_ELINKNO_ELINK (15U) //!< Bit position for DMA_TCDn_CITER_ELINKNO_ELINK. -#define BM_DMA_TCDn_CITER_ELINKNO_ELINK (0x8000U) //!< Bit mask for DMA_TCDn_CITER_ELINKNO_ELINK. -#define BS_DMA_TCDn_CITER_ELINKNO_ELINK (1U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKNO_ELINK. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CITER_ELINKNO_ELINK field. -#define BR_DMA_TCDn_CITER_ELINKNO_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKNO_ELINK)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKNO_ELINK. -#define BF_DMA_TCDn_CITER_ELINKNO_ELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKNO_ELINK), uint16_t) & BM_DMA_TCDn_CITER_ELINKNO_ELINK) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ELINK field to a new value. -#define BW_DMA_TCDn_CITER_ELINKNO_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKNO_ELINK) = (v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) (RW) - * - * Reset value: 0x0000U - * - * If TCDn_CITER[ELINK] is set, the TCDn_CITER register is defined as follows. - */ -typedef union _hw_dma_tcdn_citer_elinkyes -{ - uint16_t U; - struct _hw_dma_tcdn_citer_elinkyes_bitfields - { - uint16_t CITER : 9; //!< [8:0] Current Major Iteration Count - uint16_t LINKCH : 4; //!< [12:9] Link Channel Number - uint16_t RESERVED0 : 2; //!< [14:13] - uint16_t ELINK : 1; //!< [15] Enable channel-to-channel linking on - //! minor-loop complete - } B; -} hw_dma_tcdn_citer_elinkyes_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_CITER_ELINKYES register - */ -//@{ -#define HW_DMA_TCDn_CITER_ELINKYES_COUNT (16U) - -#define HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1016U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_CITER_ELINKYES(x, n) (*(__IO hw_dma_tcdn_citer_elinkyes_t *) HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n)) -#define HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).U) -#define HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES(x, n).U = (v)) -#define HW_DMA_TCDn_CITER_ELINKYES_SET(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) | (v))) -#define HW_DMA_TCDn_CITER_ELINKYES_CLR(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_CITER_ELINKYES_TOG(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_CITER_ELINKYES bitfields - */ - -/*! - * @name Register DMA_TCDn_CITER_ELINKYES, field CITER[8:0] (RW) - * - * This 9-bit (ELINK = 1) or 15-bit (ELINK = 0) count represents the current - * major loop count for the channel. It is decremented each time the minor loop is - * completed and updated in the transfer control descriptor memory. After the - * major iteration count is exhausted, the channel performs a number of operations - * (e.g., final source and destination address calculations), optionally generating - * an interrupt to signal channel completion before reloading the CITER field - * from the beginning iteration count (BITER) field. When the CITER field is - * initially loaded by software, it must be set to the same value as that contained in - * the BITER field. If the channel is configured to execute a single service - * request, the initial values of BITER and CITER should be 0x0001. - */ -//@{ -#define BP_DMA_TCDn_CITER_ELINKYES_CITER (0U) //!< Bit position for DMA_TCDn_CITER_ELINKYES_CITER. -#define BM_DMA_TCDn_CITER_ELINKYES_CITER (0x01FFU) //!< Bit mask for DMA_TCDn_CITER_ELINKYES_CITER. -#define BS_DMA_TCDn_CITER_ELINKYES_CITER (9U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_CITER. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_CITER field. -#define BR_DMA_TCDn_CITER_ELINKYES_CITER(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).B.CITER) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_CITER. -#define BF_DMA_TCDn_CITER_ELINKYES_CITER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKYES_CITER), uint16_t) & BM_DMA_TCDn_CITER_ELINKYES_CITER) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the CITER field to a new value. -#define BW_DMA_TCDn_CITER_ELINKYES_CITER(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKYES_CITER) | BF_DMA_TCDn_CITER_ELINKYES_CITER(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CITER_ELINKYES, field LINKCH[12:9] (RW) - * - * If channel-to-channel linking is enabled (ELINK = 1), then after the minor - * loop is exhausted, the eDMA engine initiates a channel service request to the - * channel defined by these four bits by setting that channel's TCDn_CSR[START] bit. - */ -//@{ -#define BP_DMA_TCDn_CITER_ELINKYES_LINKCH (9U) //!< Bit position for DMA_TCDn_CITER_ELINKYES_LINKCH. -#define BM_DMA_TCDn_CITER_ELINKYES_LINKCH (0x1E00U) //!< Bit mask for DMA_TCDn_CITER_ELINKYES_LINKCH. -#define BS_DMA_TCDn_CITER_ELINKYES_LINKCH (4U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_LINKCH. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_LINKCH field. -#define BR_DMA_TCDn_CITER_ELINKYES_LINKCH(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).B.LINKCH) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_LINKCH. -#define BF_DMA_TCDn_CITER_ELINKYES_LINKCH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKYES_LINKCH), uint16_t) & BM_DMA_TCDn_CITER_ELINKYES_LINKCH) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the LINKCH field to a new value. -#define BW_DMA_TCDn_CITER_ELINKYES_LINKCH(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKYES_LINKCH) | BF_DMA_TCDn_CITER_ELINKYES_LINKCH(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CITER_ELINKYES, field ELINK[15] (RW) - * - * As the channel completes the minor loop, this flag enables linking to another - * channel, defined by the LINKCH field. The link target channel initiates a - * channel service request via an internal mechanism that sets the TCDn_CSR[START] - * bit of the specified channel. If channel linking is disabled, the CITER value - * is extended to 15 bits in place of a link channel number. If the major loop is - * exhausted, this link mechanism is suppressed in favor of the MAJORELINK - * channel linking. This bit must be equal to the BITER[ELINK] bit; otherwise, a - * configuration error is reported. - * - * Values: - * - 0 - The channel-to-channel linking is disabled - * - 1 - The channel-to-channel linking is enabled - */ -//@{ -#define BP_DMA_TCDn_CITER_ELINKYES_ELINK (15U) //!< Bit position for DMA_TCDn_CITER_ELINKYES_ELINK. -#define BM_DMA_TCDn_CITER_ELINKYES_ELINK (0x8000U) //!< Bit mask for DMA_TCDn_CITER_ELINKYES_ELINK. -#define BS_DMA_TCDn_CITER_ELINKYES_ELINK (1U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_ELINK. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_ELINK field. -#define BR_DMA_TCDn_CITER_ELINKYES_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKYES_ELINK)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_ELINK. -#define BF_DMA_TCDn_CITER_ELINKYES_ELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKYES_ELINK), uint16_t) & BM_DMA_TCDn_CITER_ELINKYES_ELINK) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ELINK field to a new value. -#define BW_DMA_TCDn_CITER_ELINKYES_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKYES_ELINK) = (v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address (RW) - * - * Reset value: 0x00000000U - */ -typedef union _hw_dma_tcdn_dlastsga -{ - uint32_t U; - struct _hw_dma_tcdn_dlastsga_bitfields - { - uint32_t DLASTSGA : 32; //!< [31:0] - } B; -} hw_dma_tcdn_dlastsga_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_DLASTSGA register - */ -//@{ -#define HW_DMA_TCDn_DLASTSGA_COUNT (16U) - -#define HW_DMA_TCDn_DLASTSGA_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1018U + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_DLASTSGA(x, n) (*(__IO hw_dma_tcdn_dlastsga_t *) HW_DMA_TCDn_DLASTSGA_ADDR(x, n)) -#define HW_DMA_TCDn_DLASTSGA_RD(x, n) (HW_DMA_TCDn_DLASTSGA(x, n).U) -#define HW_DMA_TCDn_DLASTSGA_WR(x, n, v) (HW_DMA_TCDn_DLASTSGA(x, n).U = (v)) -#define HW_DMA_TCDn_DLASTSGA_SET(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) | (v))) -#define HW_DMA_TCDn_DLASTSGA_CLR(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_DLASTSGA_TOG(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_DLASTSGA bitfields - */ - -/*! - * @name Register DMA_TCDn_DLASTSGA, field DLASTSGA[31:0] (RW) - * - * Destination last address adjustment or the memory address for the next - * transfer control descriptor to be loaded into this channel (scatter/gather). If - * (TCDn_CSR[ESG] = 0), then: Adjustment value added to the destination address at - * the completion of the major iteration count. This value can apply to restore the - * destination address to the initial value or adjust the address to reference - * the next data structure. This field uses two's complement notation for the - * final destination address adjustment. Otherwise: This address points to the - * beginning of a 0-modulo-32-byte region containing the next transfer control - * descriptor to be loaded into this channel. This channel reload is performed as the - * major iteration count completes. The scatter/gather address must be - * 0-modulo-32-byte, else a configuration error is reported. - */ -//@{ -#define BP_DMA_TCDn_DLASTSGA_DLASTSGA (0U) //!< Bit position for DMA_TCDn_DLASTSGA_DLASTSGA. -#define BM_DMA_TCDn_DLASTSGA_DLASTSGA (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_DLASTSGA_DLASTSGA. -#define BS_DMA_TCDn_DLASTSGA_DLASTSGA (32U) //!< Bit field size in bits for DMA_TCDn_DLASTSGA_DLASTSGA. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_DLASTSGA_DLASTSGA field. -#define BR_DMA_TCDn_DLASTSGA_DLASTSGA(x, n) (HW_DMA_TCDn_DLASTSGA(x, n).U) -#endif - -//! @brief Format value for bitfield DMA_TCDn_DLASTSGA_DLASTSGA. -#define BF_DMA_TCDn_DLASTSGA_DLASTSGA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_DLASTSGA_DLASTSGA), uint32_t) & BM_DMA_TCDn_DLASTSGA_DLASTSGA) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DLASTSGA field to a new value. -#define BW_DMA_TCDn_DLASTSGA_DLASTSGA(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_CSR - TCD Control and Status -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_CSR - TCD Control and Status (RW) - * - * Reset value: 0x0000U - */ -typedef union _hw_dma_tcdn_csr -{ - uint16_t U; - struct _hw_dma_tcdn_csr_bitfields - { - uint16_t START : 1; //!< [0] Channel Start - uint16_t INTMAJOR : 1; //!< [1] Enable an interrupt when major - //! iteration count completes - uint16_t INTHALF : 1; //!< [2] Enable an interrupt when major counter - //! is half complete. - uint16_t DREQ : 1; //!< [3] Disable Request - uint16_t ESG : 1; //!< [4] Enable Scatter/Gather Processing - uint16_t MAJORELINK : 1; //!< [5] Enable channel-to-channel linking - //! on major loop complete - uint16_t ACTIVE : 1; //!< [6] Channel Active - uint16_t DONE : 1; //!< [7] Channel Done - uint16_t MAJORLINKCH : 4; //!< [11:8] Link Channel Number - uint16_t RESERVED0 : 2; //!< [13:12] - uint16_t BWC : 2; //!< [15:14] Bandwidth Control - } B; -} hw_dma_tcdn_csr_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_CSR register - */ -//@{ -#define HW_DMA_TCDn_CSR_COUNT (16U) - -#define HW_DMA_TCDn_CSR_ADDR(x, n) (REGS_DMA_BASE(x) + 0x101CU + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_CSR(x, n) (*(__IO hw_dma_tcdn_csr_t *) HW_DMA_TCDn_CSR_ADDR(x, n)) -#define HW_DMA_TCDn_CSR_RD(x, n) (HW_DMA_TCDn_CSR(x, n).U) -#define HW_DMA_TCDn_CSR_WR(x, n, v) (HW_DMA_TCDn_CSR(x, n).U = (v)) -#define HW_DMA_TCDn_CSR_SET(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) | (v))) -#define HW_DMA_TCDn_CSR_CLR(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_CSR_TOG(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_CSR bitfields - */ - -/*! - * @name Register DMA_TCDn_CSR, field START[0] (RW) - * - * If this flag is set, the channel is requesting service. The eDMA hardware - * automatically clears this flag after the channel begins execution. - * - * Values: - * - 0 - The channel is not explicitly started - * - 1 - The channel is explicitly started via a software initiated service - * request - */ -//@{ -#define BP_DMA_TCDn_CSR_START (0U) //!< Bit position for DMA_TCDn_CSR_START. -#define BM_DMA_TCDn_CSR_START (0x0001U) //!< Bit mask for DMA_TCDn_CSR_START. -#define BS_DMA_TCDn_CSR_START (1U) //!< Bit field size in bits for DMA_TCDn_CSR_START. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_START field. -#define BR_DMA_TCDn_CSR_START(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_START)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_START. -#define BF_DMA_TCDn_CSR_START(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_START), uint16_t) & BM_DMA_TCDn_CSR_START) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the START field to a new value. -#define BW_DMA_TCDn_CSR_START(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_START) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field INTMAJOR[1] (RW) - * - * If this flag is set, the channel generates an interrupt request by setting - * the appropriate bit in the INT when the current major iteration count reaches - * zero. - * - * Values: - * - 0 - The end-of-major loop interrupt is disabled - * - 1 - The end-of-major loop interrupt is enabled - */ -//@{ -#define BP_DMA_TCDn_CSR_INTMAJOR (1U) //!< Bit position for DMA_TCDn_CSR_INTMAJOR. -#define BM_DMA_TCDn_CSR_INTMAJOR (0x0002U) //!< Bit mask for DMA_TCDn_CSR_INTMAJOR. -#define BS_DMA_TCDn_CSR_INTMAJOR (1U) //!< Bit field size in bits for DMA_TCDn_CSR_INTMAJOR. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_INTMAJOR field. -#define BR_DMA_TCDn_CSR_INTMAJOR(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTMAJOR)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_INTMAJOR. -#define BF_DMA_TCDn_CSR_INTMAJOR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_INTMAJOR), uint16_t) & BM_DMA_TCDn_CSR_INTMAJOR) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INTMAJOR field to a new value. -#define BW_DMA_TCDn_CSR_INTMAJOR(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTMAJOR) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field INTHALF[2] (RW) - * - * If this flag is set, the channel generates an interrupt request by setting - * the appropriate bit in the INT register when the current major iteration count - * reaches the halfway point. Specifically, the comparison performed by the eDMA - * engine is (CITER == (BITER >> 1)). This halfway point interrupt request is - * provided to support double-buffered (aka ping-pong) schemes or other types of data - * movement where the processor needs an early indication of the transfer's - * progress. If BITER is set, do not use INTHALF. Use INTMAJOR instead. - * - * Values: - * - 0 - The half-point interrupt is disabled - * - 1 - The half-point interrupt is enabled - */ -//@{ -#define BP_DMA_TCDn_CSR_INTHALF (2U) //!< Bit position for DMA_TCDn_CSR_INTHALF. -#define BM_DMA_TCDn_CSR_INTHALF (0x0004U) //!< Bit mask for DMA_TCDn_CSR_INTHALF. -#define BS_DMA_TCDn_CSR_INTHALF (1U) //!< Bit field size in bits for DMA_TCDn_CSR_INTHALF. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_INTHALF field. -#define BR_DMA_TCDn_CSR_INTHALF(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTHALF)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_INTHALF. -#define BF_DMA_TCDn_CSR_INTHALF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_INTHALF), uint16_t) & BM_DMA_TCDn_CSR_INTHALF) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the INTHALF field to a new value. -#define BW_DMA_TCDn_CSR_INTHALF(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTHALF) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field DREQ[3] (RW) - * - * If this flag is set, the eDMA hardware automatically clears the corresponding - * ERQ bit when the current major iteration count reaches zero. - * - * Values: - * - 0 - The channel's ERQ bit is not affected - * - 1 - The channel's ERQ bit is cleared when the major loop is complete - */ -//@{ -#define BP_DMA_TCDn_CSR_DREQ (3U) //!< Bit position for DMA_TCDn_CSR_DREQ. -#define BM_DMA_TCDn_CSR_DREQ (0x0008U) //!< Bit mask for DMA_TCDn_CSR_DREQ. -#define BS_DMA_TCDn_CSR_DREQ (1U) //!< Bit field size in bits for DMA_TCDn_CSR_DREQ. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_DREQ field. -#define BR_DMA_TCDn_CSR_DREQ(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DREQ)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_DREQ. -#define BF_DMA_TCDn_CSR_DREQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_DREQ), uint16_t) & BM_DMA_TCDn_CSR_DREQ) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DREQ field to a new value. -#define BW_DMA_TCDn_CSR_DREQ(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DREQ) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field ESG[4] (RW) - * - * As the channel completes the major loop, this flag enables scatter/gather - * processing in the current channel. If enabled, the eDMA engine uses DLASTSGA as a - * memory pointer to a 0-modulo-32 address containing a 32-byte data structure - * loaded as the transfer control descriptor into the local memory. To support the - * dynamic scatter/gather coherency model, this field is forced to zero when - * written to while the TCDn_CSR[DONE] bit is set. - * - * Values: - * - 0 - The current channel's TCD is normal format. - * - 1 - The current channel's TCD specifies a scatter gather format. The - * DLASTSGA field provides a memory pointer to the next TCD to be loaded into this - * channel after the major loop completes its execution. - */ -//@{ -#define BP_DMA_TCDn_CSR_ESG (4U) //!< Bit position for DMA_TCDn_CSR_ESG. -#define BM_DMA_TCDn_CSR_ESG (0x0010U) //!< Bit mask for DMA_TCDn_CSR_ESG. -#define BS_DMA_TCDn_CSR_ESG (1U) //!< Bit field size in bits for DMA_TCDn_CSR_ESG. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_ESG field. -#define BR_DMA_TCDn_CSR_ESG(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ESG)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_ESG. -#define BF_DMA_TCDn_CSR_ESG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_ESG), uint16_t) & BM_DMA_TCDn_CSR_ESG) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ESG field to a new value. -#define BW_DMA_TCDn_CSR_ESG(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ESG) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field MAJORELINK[5] (RW) - * - * As the channel completes the major loop, this flag enables the linking to - * another channel, defined by MAJORLINKCH. The link target channel initiates a - * channel service request via an internal mechanism that sets the TCDn_CSR[START] - * bit of the specified channel. To support the dynamic linking coherency model, - * this field is forced to zero when written to while the TCDn_CSR[DONE] bit is set. - * - * Values: - * - 0 - The channel-to-channel linking is disabled - * - 1 - The channel-to-channel linking is enabled - */ -//@{ -#define BP_DMA_TCDn_CSR_MAJORELINK (5U) //!< Bit position for DMA_TCDn_CSR_MAJORELINK. -#define BM_DMA_TCDn_CSR_MAJORELINK (0x0020U) //!< Bit mask for DMA_TCDn_CSR_MAJORELINK. -#define BS_DMA_TCDn_CSR_MAJORELINK (1U) //!< Bit field size in bits for DMA_TCDn_CSR_MAJORELINK. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_MAJORELINK field. -#define BR_DMA_TCDn_CSR_MAJORELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_MAJORELINK)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_MAJORELINK. -#define BF_DMA_TCDn_CSR_MAJORELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_MAJORELINK), uint16_t) & BM_DMA_TCDn_CSR_MAJORELINK) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the MAJORELINK field to a new value. -#define BW_DMA_TCDn_CSR_MAJORELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_MAJORELINK) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field ACTIVE[6] (RW) - * - * This flag signals the channel is currently in execution. It is set when - * channel service begins, and the eDMA clears it as the minor loop completes or if - * any error condition is detected. This bit resets to zero. - */ -//@{ -#define BP_DMA_TCDn_CSR_ACTIVE (6U) //!< Bit position for DMA_TCDn_CSR_ACTIVE. -#define BM_DMA_TCDn_CSR_ACTIVE (0x0040U) //!< Bit mask for DMA_TCDn_CSR_ACTIVE. -#define BS_DMA_TCDn_CSR_ACTIVE (1U) //!< Bit field size in bits for DMA_TCDn_CSR_ACTIVE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_ACTIVE field. -#define BR_DMA_TCDn_CSR_ACTIVE(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ACTIVE)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_ACTIVE. -#define BF_DMA_TCDn_CSR_ACTIVE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_ACTIVE), uint16_t) & BM_DMA_TCDn_CSR_ACTIVE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ACTIVE field to a new value. -#define BW_DMA_TCDn_CSR_ACTIVE(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ACTIVE) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field DONE[7] (RW) - * - * This flag indicates the eDMA has completed the major loop. The eDMA engine - * sets it as the CITER count reaches zero; The software clears it, or the hardware - * when the channel is activated. This bit must be cleared to write the - * MAJORELINK or ESG bits. - */ -//@{ -#define BP_DMA_TCDn_CSR_DONE (7U) //!< Bit position for DMA_TCDn_CSR_DONE. -#define BM_DMA_TCDn_CSR_DONE (0x0080U) //!< Bit mask for DMA_TCDn_CSR_DONE. -#define BS_DMA_TCDn_CSR_DONE (1U) //!< Bit field size in bits for DMA_TCDn_CSR_DONE. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_DONE field. -#define BR_DMA_TCDn_CSR_DONE(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DONE)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_DONE. -#define BF_DMA_TCDn_CSR_DONE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_DONE), uint16_t) & BM_DMA_TCDn_CSR_DONE) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the DONE field to a new value. -#define BW_DMA_TCDn_CSR_DONE(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DONE) = (v)) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field MAJORLINKCH[11:8] (RW) - * - * If (MAJORELINK = 0) then No channel-to-channel linking (or chaining) is - * performed after the major loop counter is exhausted. else After the major loop - * counter is exhausted, the eDMA engine initiates a channel service request at the - * channel defined by these six bits by setting that channel's TCDn_CSR[START] bit. - */ -//@{ -#define BP_DMA_TCDn_CSR_MAJORLINKCH (8U) //!< Bit position for DMA_TCDn_CSR_MAJORLINKCH. -#define BM_DMA_TCDn_CSR_MAJORLINKCH (0x0F00U) //!< Bit mask for DMA_TCDn_CSR_MAJORLINKCH. -#define BS_DMA_TCDn_CSR_MAJORLINKCH (4U) //!< Bit field size in bits for DMA_TCDn_CSR_MAJORLINKCH. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_MAJORLINKCH field. -#define BR_DMA_TCDn_CSR_MAJORLINKCH(x, n) (HW_DMA_TCDn_CSR(x, n).B.MAJORLINKCH) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_MAJORLINKCH. -#define BF_DMA_TCDn_CSR_MAJORLINKCH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_MAJORLINKCH), uint16_t) & BM_DMA_TCDn_CSR_MAJORLINKCH) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the MAJORLINKCH field to a new value. -#define BW_DMA_TCDn_CSR_MAJORLINKCH(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, (HW_DMA_TCDn_CSR_RD(x, n) & ~BM_DMA_TCDn_CSR_MAJORLINKCH) | BF_DMA_TCDn_CSR_MAJORLINKCH(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_CSR, field BWC[15:14] (RW) - * - * Throttles the amount of bus bandwidth consumed by the eDMA. In general, as - * the eDMA processes the minor loop, it continuously generates read/write - * sequences until the minor count is exhausted. This field forces the eDMA to stall - * after the completion of each read/write access to control the bus request - * bandwidth seen by the crossbar switch. If the source and destination sizes are equal, - * this field is ignored between the first and second transfers and after the - * last write of each minor loop. This behavior is a side effect of reducing - * start-up latency. - * - * Values: - * - 00 - No eDMA engine stalls - * - 01 - Reserved - * - 10 - eDMA engine stalls for 4 cycles after each r/w - * - 11 - eDMA engine stalls for 8 cycles after each r/w - */ -//@{ -#define BP_DMA_TCDn_CSR_BWC (14U) //!< Bit position for DMA_TCDn_CSR_BWC. -#define BM_DMA_TCDn_CSR_BWC (0xC000U) //!< Bit mask for DMA_TCDn_CSR_BWC. -#define BS_DMA_TCDn_CSR_BWC (2U) //!< Bit field size in bits for DMA_TCDn_CSR_BWC. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_CSR_BWC field. -#define BR_DMA_TCDn_CSR_BWC(x, n) (HW_DMA_TCDn_CSR(x, n).B.BWC) -#endif - -//! @brief Format value for bitfield DMA_TCDn_CSR_BWC. -#define BF_DMA_TCDn_CSR_BWC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_BWC), uint16_t) & BM_DMA_TCDn_CSR_BWC) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the BWC field to a new value. -#define BW_DMA_TCDn_CSR_BWC(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, (HW_DMA_TCDn_CSR_RD(x, n) & ~BM_DMA_TCDn_CSR_BWC) | BF_DMA_TCDn_CSR_BWC(v))) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) (RW) - * - * Reset value: 0x0000U - * - * If the TCDn_BITER[ELINK] bit is cleared, the TCDn_BITER register is defined - * as follows. - */ -typedef union _hw_dma_tcdn_biter_elinkno -{ - uint16_t U; - struct _hw_dma_tcdn_biter_elinkno_bitfields - { - uint16_t BITER : 15; //!< [14:0] Starting Major Iteration Count - uint16_t ELINK : 1; //!< [15] Enables channel-to-channel linking on - //! minor loop complete - } B; -} hw_dma_tcdn_biter_elinkno_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_BITER_ELINKNO register - */ -//@{ -#define HW_DMA_TCDn_BITER_ELINKNO_COUNT (16U) - -#define HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n) (REGS_DMA_BASE(x) + 0x101EU + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_BITER_ELINKNO(x, n) (*(__IO hw_dma_tcdn_biter_elinkno_t *) HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n)) -#define HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) (HW_DMA_TCDn_BITER_ELINKNO(x, n).U) -#define HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO(x, n).U = (v)) -#define HW_DMA_TCDn_BITER_ELINKNO_SET(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) | (v))) -#define HW_DMA_TCDn_BITER_ELINKNO_CLR(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_BITER_ELINKNO_TOG(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_BITER_ELINKNO bitfields - */ - -/*! - * @name Register DMA_TCDn_BITER_ELINKNO, field BITER[14:0] (RW) - * - * As the transfer control descriptor is first loaded by software, this 9-bit - * (ELINK = 1) or 15-bit (ELINK = 0) field must be equal to the value in the CITER - * field. As the major iteration count is exhausted, the contents of this field - * are reloaded into the CITER field. When the software loads the TCD, this field - * must be set equal to the corresponding CITER field; otherwise, a configuration - * error is reported. As the major iteration count is exhausted, the contents of - * this field is reloaded into the CITER field. If the channel is configured to - * execute a single service request, the initial values of BITER and CITER should - * be 0x0001. - */ -//@{ -#define BP_DMA_TCDn_BITER_ELINKNO_BITER (0U) //!< Bit position for DMA_TCDn_BITER_ELINKNO_BITER. -#define BM_DMA_TCDn_BITER_ELINKNO_BITER (0x7FFFU) //!< Bit mask for DMA_TCDn_BITER_ELINKNO_BITER. -#define BS_DMA_TCDn_BITER_ELINKNO_BITER (15U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKNO_BITER. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_BITER_ELINKNO_BITER field. -#define BR_DMA_TCDn_BITER_ELINKNO_BITER(x, n) (HW_DMA_TCDn_BITER_ELINKNO(x, n).B.BITER) -#endif - -//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKNO_BITER. -#define BF_DMA_TCDn_BITER_ELINKNO_BITER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKNO_BITER), uint16_t) & BM_DMA_TCDn_BITER_ELINKNO_BITER) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the BITER field to a new value. -#define BW_DMA_TCDn_BITER_ELINKNO_BITER(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, (HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKNO_BITER) | BF_DMA_TCDn_BITER_ELINKNO_BITER(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_BITER_ELINKNO, field ELINK[15] (RW) - * - * As the channel completes the minor loop, this flag enables the linking to - * another channel, defined by BITER[LINKCH]. The link target channel initiates a - * channel service request via an internal mechanism that sets the TCDn_CSR[START] - * bit of the specified channel. If channel linking is disabled, the BITER value - * extends to 15 bits in place of a link channel number. If the major loop is - * exhausted, this link mechanism is suppressed in favor of the MAJORELINK channel - * linking. When the software loads the TCD, this field must be set equal to the - * corresponding CITER field; otherwise, a configuration error is reported. As the - * major iteration count is exhausted, the contents of this field is reloaded - * into the CITER field. - * - * Values: - * - 0 - The channel-to-channel linking is disabled - * - 1 - The channel-to-channel linking is enabled - */ -//@{ -#define BP_DMA_TCDn_BITER_ELINKNO_ELINK (15U) //!< Bit position for DMA_TCDn_BITER_ELINKNO_ELINK. -#define BM_DMA_TCDn_BITER_ELINKNO_ELINK (0x8000U) //!< Bit mask for DMA_TCDn_BITER_ELINKNO_ELINK. -#define BS_DMA_TCDn_BITER_ELINKNO_ELINK (1U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKNO_ELINK. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_BITER_ELINKNO_ELINK field. -#define BR_DMA_TCDn_BITER_ELINKNO_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKNO_ELINK)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKNO_ELINK. -#define BF_DMA_TCDn_BITER_ELINKNO_ELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKNO_ELINK), uint16_t) & BM_DMA_TCDn_BITER_ELINKNO_ELINK) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ELINK field to a new value. -#define BW_DMA_TCDn_BITER_ELINKNO_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKNO_ELINK) = (v)) -#endif -//@} -//------------------------------------------------------------------------------------------- -// HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) -//------------------------------------------------------------------------------------------- - -#ifndef __LANGUAGE_ASM__ -/*! - * @brief HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) (RW) - * - * Reset value: 0x0000U - * - * If the TCDn_BITER[ELINK] bit is set, the TCDn_BITER register is defined as - * follows. - */ -typedef union _hw_dma_tcdn_biter_elinkyes -{ - uint16_t U; - struct _hw_dma_tcdn_biter_elinkyes_bitfields - { - uint16_t BITER : 9; //!< [8:0] Starting Major Iteration Count - uint16_t LINKCH : 4; //!< [12:9] Link Channel Number - uint16_t RESERVED0 : 2; //!< [14:13] - uint16_t ELINK : 1; //!< [15] Enables channel-to-channel linking on - //! minor loop complete - } B; -} hw_dma_tcdn_biter_elinkyes_t; -#endif - -/*! - * @name Constants and macros for entire DMA_TCDn_BITER_ELINKYES register - */ -//@{ -#define HW_DMA_TCDn_BITER_ELINKYES_COUNT (16U) - -#define HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n) (REGS_DMA_BASE(x) + 0x101EU + (0x20U * n)) - -#ifndef __LANGUAGE_ASM__ -#define HW_DMA_TCDn_BITER_ELINKYES(x, n) (*(__IO hw_dma_tcdn_biter_elinkyes_t *) HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n)) -#define HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).U) -#define HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES(x, n).U = (v)) -#define HW_DMA_TCDn_BITER_ELINKYES_SET(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) | (v))) -#define HW_DMA_TCDn_BITER_ELINKYES_CLR(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~(v))) -#define HW_DMA_TCDn_BITER_ELINKYES_TOG(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) ^ (v))) -#endif -//@} - -/* - * Constants & macros for individual DMA_TCDn_BITER_ELINKYES bitfields - */ - -/*! - * @name Register DMA_TCDn_BITER_ELINKYES, field BITER[8:0] (RW) - * - * As the transfer control descriptor is first loaded by software, this 9-bit - * (ELINK = 1) or 15-bit (ELINK = 0) field must be equal to the value in the CITER - * field. As the major iteration count is exhausted, the contents of this field - * are reloaded into the CITER field. When the software loads the TCD, this field - * must be set equal to the corresponding CITER field; otherwise, a configuration - * error is reported. As the major iteration count is exhausted, the contents of - * this field is reloaded into the CITER field. If the channel is configured to - * execute a single service request, the initial values of BITER and CITER should - * be 0x0001. - */ -//@{ -#define BP_DMA_TCDn_BITER_ELINKYES_BITER (0U) //!< Bit position for DMA_TCDn_BITER_ELINKYES_BITER. -#define BM_DMA_TCDn_BITER_ELINKYES_BITER (0x01FFU) //!< Bit mask for DMA_TCDn_BITER_ELINKYES_BITER. -#define BS_DMA_TCDn_BITER_ELINKYES_BITER (9U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_BITER. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_BITER field. -#define BR_DMA_TCDn_BITER_ELINKYES_BITER(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).B.BITER) -#endif - -//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_BITER. -#define BF_DMA_TCDn_BITER_ELINKYES_BITER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKYES_BITER), uint16_t) & BM_DMA_TCDn_BITER_ELINKYES_BITER) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the BITER field to a new value. -#define BW_DMA_TCDn_BITER_ELINKYES_BITER(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKYES_BITER) | BF_DMA_TCDn_BITER_ELINKYES_BITER(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_BITER_ELINKYES, field LINKCH[12:9] (RW) - * - * If channel-to-channel linking is enabled (ELINK = 1), then after the minor - * loop is exhausted, the eDMA engine initiates a channel service request at the - * channel defined by these four bits by setting that channel's TCDn_CSR[START] - * bit. When the software loads the TCD, this field must be set equal to the - * corresponding CITER field; otherwise, a configuration error is reported. As the major - * iteration count is exhausted, the contents of this field is reloaded into the - * CITER field. - */ -//@{ -#define BP_DMA_TCDn_BITER_ELINKYES_LINKCH (9U) //!< Bit position for DMA_TCDn_BITER_ELINKYES_LINKCH. -#define BM_DMA_TCDn_BITER_ELINKYES_LINKCH (0x1E00U) //!< Bit mask for DMA_TCDn_BITER_ELINKYES_LINKCH. -#define BS_DMA_TCDn_BITER_ELINKYES_LINKCH (4U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_LINKCH. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_LINKCH field. -#define BR_DMA_TCDn_BITER_ELINKYES_LINKCH(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).B.LINKCH) -#endif - -//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_LINKCH. -#define BF_DMA_TCDn_BITER_ELINKYES_LINKCH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKYES_LINKCH), uint16_t) & BM_DMA_TCDn_BITER_ELINKYES_LINKCH) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the LINKCH field to a new value. -#define BW_DMA_TCDn_BITER_ELINKYES_LINKCH(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKYES_LINKCH) | BF_DMA_TCDn_BITER_ELINKYES_LINKCH(v))) -#endif -//@} - -/*! - * @name Register DMA_TCDn_BITER_ELINKYES, field ELINK[15] (RW) - * - * As the channel completes the minor loop, this flag enables the linking to - * another channel, defined by BITER[LINKCH]. The link target channel initiates a - * channel service request via an internal mechanism that sets the TCDn_CSR[START] - * bit of the specified channel. If channel linking disables, the BITER value - * extends to 15 bits in place of a link channel number. If the major loop is - * exhausted, this link mechanism is suppressed in favor of the MAJORELINK channel - * linking. When the software loads the TCD, this field must be set equal to the - * corresponding CITER field; otherwise, a configuration error is reported. As the - * major iteration count is exhausted, the contents of this field is reloaded into - * the CITER field. - * - * Values: - * - 0 - The channel-to-channel linking is disabled - * - 1 - The channel-to-channel linking is enabled - */ -//@{ -#define BP_DMA_TCDn_BITER_ELINKYES_ELINK (15U) //!< Bit position for DMA_TCDn_BITER_ELINKYES_ELINK. -#define BM_DMA_TCDn_BITER_ELINKYES_ELINK (0x8000U) //!< Bit mask for DMA_TCDn_BITER_ELINKYES_ELINK. -#define BS_DMA_TCDn_BITER_ELINKYES_ELINK (1U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_ELINK. - -#ifndef __LANGUAGE_ASM__ -//! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_ELINK field. -#define BR_DMA_TCDn_BITER_ELINKYES_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKYES_ELINK)) -#endif - -//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_ELINK. -#define BF_DMA_TCDn_BITER_ELINKYES_ELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKYES_ELINK), uint16_t) & BM_DMA_TCDn_BITER_ELINKYES_ELINK) - -#ifndef __LANGUAGE_ASM__ -//! @brief Set the ELINK field to a new value. -#define BW_DMA_TCDn_BITER_ELINKYES_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKYES_ELINK) = (v)) -#endif -//@} - -//------------------------------------------------------------------------------------------- -// hw_dma_t - module struct -//------------------------------------------------------------------------------------------- -/*! - * @brief All DMA module registers. - */ -#ifndef __LANGUAGE_ASM__ -#pragma pack(1) -typedef struct _hw_dma -{ - __IO hw_dma_cr_t CR; //!< [0x0] Control Register - __I hw_dma_es_t ES; //!< [0x4] Error Status Register - uint8_t _reserved0[4]; - __IO hw_dma_erq_t ERQ; //!< [0xC] Enable Request Register - uint8_t _reserved1[4]; - __IO hw_dma_eei_t EEI; //!< [0x14] Enable Error Interrupt Register - __O hw_dma_ceei_t CEEI; //!< [0x18] Clear Enable Error Interrupt Register - __O hw_dma_seei_t SEEI; //!< [0x19] Set Enable Error Interrupt Register - __O hw_dma_cerq_t CERQ; //!< [0x1A] Clear Enable Request Register - __O hw_dma_serq_t SERQ; //!< [0x1B] Set Enable Request Register - __O hw_dma_cdne_t CDNE; //!< [0x1C] Clear DONE Status Bit Register - __O hw_dma_ssrt_t SSRT; //!< [0x1D] Set START Bit Register - __O hw_dma_cerr_t CERR; //!< [0x1E] Clear Error Register - __O hw_dma_cint_t CINT; //!< [0x1F] Clear Interrupt Request Register - uint8_t _reserved2[4]; - __IO hw_dma_int_t INT; //!< [0x24] Interrupt Request Register - uint8_t _reserved3[4]; - __IO hw_dma_err_t ERR; //!< [0x2C] Error Register - uint8_t _reserved4[4]; - __I hw_dma_hrs_t HRS; //!< [0x34] Hardware Request Status Register - uint8_t _reserved5[200]; - __IO hw_dma_dchprin_t DCHPRIn[16]; //!< [0x100] Channel n Priority Register - uint8_t _reserved6[3824]; - struct { - __IO hw_dma_tcdn_saddr_t TCDn_SADDR; //!< [0x1000] TCD Source Address - __IO hw_dma_tcdn_soff_t TCDn_SOFF; //!< [0x1004] TCD Signed Source Address Offset - __IO hw_dma_tcdn_attr_t TCDn_ATTR; //!< [0x1006] TCD Transfer Attributes - union { - __IO hw_dma_tcdn_nbytes_mlno_t TCDn_NBYTES_MLNO; //!< [0x1008] TCD Minor Byte Count (Minor Loop Disabled) - __IO hw_dma_tcdn_nbytes_mloffno_t TCDn_NBYTES_MLOFFNO; //!< [0x1008] TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) - __IO hw_dma_tcdn_nbytes_mloffyes_t TCDn_NBYTES_MLOFFYES; //!< [0x1008] TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) - }; - __IO hw_dma_tcdn_slast_t TCDn_SLAST; //!< [0x100C] TCD Last Source Address Adjustment - __IO hw_dma_tcdn_daddr_t TCDn_DADDR; //!< [0x1010] TCD Destination Address - __IO hw_dma_tcdn_doff_t TCDn_DOFF; //!< [0x1014] TCD Signed Destination Address Offset - union { - __IO hw_dma_tcdn_citer_elinkno_t TCDn_CITER_ELINKNO; //!< [0x1016] TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) - __IO hw_dma_tcdn_citer_elinkyes_t TCDn_CITER_ELINKYES; //!< [0x1016] TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) - }; - __IO hw_dma_tcdn_dlastsga_t TCDn_DLASTSGA; //!< [0x1018] TCD Last Destination Address Adjustment/Scatter Gather Address - __IO hw_dma_tcdn_csr_t TCDn_CSR; //!< [0x101C] TCD Control and Status - union { - __IO hw_dma_tcdn_biter_elinkno_t TCDn_BITER_ELINKNO; //!< [0x101E] TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) - __IO hw_dma_tcdn_biter_elinkyes_t TCDn_BITER_ELINKYES; //!< [0x101E] TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) - }; - } TCD[16]; -} hw_dma_t; -#pragma pack() - -//! @brief Macro to access all DMA registers. -//! @param x DMA instance number. -//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, -//! use the '&' operator, like <code>&HW_DMA(0)</code>. -#define HW_DMA(x) (*(hw_dma_t *) REGS_DMA_BASE(x)) -#endif - -#endif // __HW_DMA_REGISTERS_H__ -// v22/130726/0.9 -// EOF