Blank program for v0.9 API
Dependencies: PsiSwarmV9 mbed
Fork of PsiSwarm_V8_Blank_CPP by
main.cpp
- Committer:
- jah128
- Date:
- 2017-06-05
- Revision:
- 4:3af6e6afbfef
- Parent:
- 3:53cc107bcff1
File content as of revision 4:3af6e6afbfef:
/*********************************************************************** ** ██████╗ ███████╗██╗███████╗██╗ ██╗ █████╗ ██████╗ ███╗ ███╗ ** ** ██╔══██╗██╔════╝██║██╔════╝██║ ██║██╔══██╗██╔══██╗████╗ ████║ ** ** ██████╔╝███████╗██║███████╗██║ █╗ ██║███████║██████╔╝██╔████╔██║ ** ** ██╔═══╝ ╚════██║██║╚════██║██║███╗██║██╔══██║██╔══██╗██║╚██╔╝██║ ** ** ██║ ███████║██║███████║╚███╔███╔╝██║ ██║██║ ██║██║ ╚═╝ ██║ ** ** ╚═╝ ╚══════╝╚═╝╚══════╝ ╚══╝╚══╝ ╚═╝ ╚═╝╚═╝ ╚═╝╚═╝ ╚═╝ ** ************************************************************************ ** Copyright 2017 University of York - See notice at end of file ** ***********************************************************************/ /// PsiSwarm C++ Blank Example Code - Version 0.9 - June 2017 /// James Hilder, Alan Millard, Alexander Horsfield, Homero Elizondo, Jon Timmis /// Include main.h - this includes psiswarm.h all the other necessary core files #include "main.h" Psiswarm psi; char * program_name = "Blank"; char * author_name = "YRL"; char * version_name = "0.90"; ///Place user code here that should be run after initialisation but before the main loop void user_code_setup() { wait(0.8); // The display is still updating from init so wait a short while display.clear_display(); display.set_position(0,0); animations.set_colour(1); display.write_string(" [ No Code ]"); } ///User code loop: This is where user code should go; it is run as an infinite loop void user_code_loop() { // Replace this code with your main loop animations.led_run1(); wait(1.2); } /// Code goes here to handle what should happen when the user switch is pressed void handle_switch_event(char switch_state) { /// Switch_state = 1 if up is pressed, 2 if down is pressed, 4 if left is pressed, 8 if right is pressed and 16 if the center button is pressed /// NB For maximum compatability it is recommended to minimise reliance on center button press } void handle_user_serial_message(char * message, char length, char interface) { // This is where user code for handling a (non-system) serial message should go // // message = pointer to message char array // length = length of message // interface = 0 for PC serial connection, 1 for Bluetooth } /// The main routine: it is recommended to leave this function alone and add user code to the above functions int main() { psi.init(); ///psi.init() in psiswarm.cpp sets up the robot user_code_setup(); ///run user code setup block user_code_running = 1; ///nb. user code can be paused by external commands sent from PC\BT interfaces while(1) { if(user_code_running == 1) user_code_loop(); ///run user code else wait_us(1000); } } /*********************************************************************** ** Copyright 2017 University of York ** ** ** ** Licensed under the Apache License, Version 2.0 (the "License") ** ** You may not use this file except in compliance with the License. ** ** You may obtain a copy of the License at ** ** http://www.apache.org/licenses/LICENSE-2.0 Unless required by ** ** applicable law or agreed to in writing, software distributed under ** ** under the License is distributed on an "AS IS" BASIS WITHOUT ** ** WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. ** ** See the License for the specific language governing permissions ** ** and limitations under the License. ** ***********************************************************************/