Low Cost FCC/CE/RoHs Wi-Fi Module support the Mbed Applications from WT8266 We know mbod is powerful in the IoT Wi-Fi applications, more and more people want to FCC/CE/RoHs certificated module for their mbed {{/media/uploads/Wireless/wt8266.png}} applications, Wireless-Tag (www.wireless-tag.com) released one module WT8266 for maker market • FCC/CE/RoHs certificated • 32M bit Flash open for customer applications • Dedicated tech support resource on http://bbs.wireless-tag.com/ for WT8266 module • Completed software and tools for programming and development • Rich Cloud support experience to sharing This module is open for SEEED Studio http://www.seeedstudio.com/depot/WT8266S1-WiFi-Module-p-2521.html?ref=newInBazaar Besides this module wireless-tag provide other RF modules , including 433MHz, BLE, LoRa…. For more details you can contact support@wireless-tag.com WT8266 Features Core/Memory/System • Tensilica L106, ultra-low power 32-bitmicro MCU, with 16-bit RSIC. The CPU clock speed is 80MHz. It can also reach a maximum value of 160MHz and Real Time Operation System (RTOS) is enabled • RAM 36KB（Available） • Flash 16Mbit System • 802.11 b/g/n • WIFI 2.4 GHz, support WPA/WPA2 • Support STA/AP/STA+AP operation modes • Integrated TCP/IP Stack • Integrated TR switch, Balun, LNA, Power amplifier and matching network • Integrated PLL, Regulator and power source management components • PCB antenna Radio/Power Consumption • +20 dBm output power in 802.11b mode • Deep sleep power <10uA, Power down leakage current < 5uA • Wake up and transmit packets in < 2ms • Standby power consumption < 1.0mW (DTIM3) Peripherals and Interfaces • Support SDIO 2.0, (H) SPI, UART, I2C, I2S, IR Remote Control, PWM, GPIO • Supports MIMO 1×1 and 2×1, STBC, A-MPDU and A-MSDU aggregation and 0.4μs guard interval • Integrated 10 bit high precision ADC Support AT remote upgrades and cloud OTA upgrade FCC/CE/RoHs Size 18.6mm*15.0mm Operating Voltage: 3.3V Operating Temperature：-20-70°C