Diff: TARGET_LPC1549/PinNames.h

Revision:

82:6473597d706e

Parent:

81:7d30d6019079

Child:

83:8a40adfe8776

--- a/TARGET_LPC1549/PinNames.h	Wed Mar 19 18:28:32 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,100 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2014 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
-    // LPC Pin Names
-    P0_0 = 0,
-    P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
-    P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
-    P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12,
-    
-    LED_RED = P0_25,
-    LED_GREEN = P0_3,
-    LED_BLUE = P1_1,
-    
-    // mbed original LED naming
-    LED1 = LED_BLUE,
-    LED2 = LED_GREEN,
-    LED3 = LED_RED,
-    LED4 = LED_RED,
-    
-    // Serial to USB pins
-    USBTX = P0_18,
-    USBRX = P0_13,
-    
-    // Arduino Shield Receptacles Names
-    D0 = P0_13,
-    D1 = P0_18,
-    D2 = P0_29,
-    D3 = P0_9,
-    D4 = P0_10,
-    D5 = P0_16, // same port as D13
-    D6 = P1_3,
-    D7 = P0_0,
-    D8 = P0_24,
-    D9 = P1_0,
-    D10= P0_27,
-    D11= P0_28,
-    D12= P0_12,
-    D13= P0_16, // same port as D5
-    A0 = P0_8,
-    A1 = P0_7,
-    A2 = P0_6,
-    A3 = P0_5,
-    A4 = P0_23, // same port as SDA
-    A5 = P0_22, // same port as SCL
-    SDA= P0_23, // same port as A4
-    SCL= P0_22, // same port as A5
-    
-    // Not connected
-    NC = (int)0xFFFFFFFF,
-} PinName;
-
-typedef enum {
-    PullUp = 2,
-    PullDown = 1,
-    PullNone = 0,
-    Repeater = 3,
-    OpenDrain = 4,
-    PullDefault = PullDown
-} PinMode;
-
-#define STDIO_UART_TX     USBTX
-#define STDIO_UART_RX     USBRX
-
-typedef struct {
-    unsigned char n;
-    unsigned char offset;
-} SWM_Map;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif