Diff: SmartLabXBeeCore/Device/XBeePins.h

Revision:

8:4da2ac03e35e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SmartLabXBeeCore/Device/XBeePins.h	Wed Mar 30 19:58:48 2016 +0000
@@ -0,0 +1,75 @@
+#ifndef UK_AC_HERTS_SMARTLAB_XBEE_XBeePins
+#define UK_AC_HERTS_SMARTLAB_XBEE_XBeePins
+
+#include "Pin.h"
+
+/**
+* Pin configuration information for XBee S1 modules.
+*/
+class XBeePins
+{
+public:
+    /** Power supply.
+    * Poor power supply can lead to poor radio performance, especially if the supply voltage is not kept within tolerance or is excessively noisy. To help reduce noise, we recommend placing a 1.0 μF and 8.2 pF capacitor as near as possible to pin 1 on the XBee. If using a switching regulator for the power supply, switching frequencies above 500 kHz are preferred. Power supply ripple should be limited to a maximum 100 mV peak to peak.
+    */
+    static Pin * P1_VCC;
+
+    /// DOUT, Output, UART data out.
+    static Pin * P2_DOUT;
+
+    /// DIN / CONFIG(active low), Input, UART data In.
+    static Pin * P3_DIN_CONFIG;
+
+    /// DO8, Either, Digital output 8, Function is not supported at the time of this release(18/05/2015).
+    static Pin * P4_DO8;
+
+    /// RESET(active low), Input, Module reset (reset pulse must be at least 200 ns).
+    static Pin * P5_RESET;
+
+    /// PWM0 / RSSI, Either, PWM output 0 / RX signal strength indicator.
+    static Pin * P6_RSSI_PWM0;
+
+    /// PWM1, Either, PWM output 1.
+    static Pin * P7_PWM1;
+
+    /// Reserved, Do not connect.
+    static Pin * P8_RESERVED;
+
+    /// DTR(active low) / SLEEP_RQ/ DI8, Either, Pin sleep control line or digital input 8.
+    static Pin * P9_DTR_SLEEP_DIO8;
+
+    /// Ground.
+    static Pin * P10_GND;
+
+    /// AD4 / DIO4, Either, Analog input 4 or digital I/O 4.
+    static Pin * P11_AD4_DIO4;
+
+    /// CTS(active low) / DIO7 Either Clear-to-send flow control or digital I/O 7.
+    static Pin * P12_CTS_DIO7;
+
+    /// ON / SLEEP(active low), Output, Module status indicator
+    static Pin * P13_ON_SLEEP;
+
+    /// VREF, Input, Voltage reference for A/D inputs.
+    static Pin * P14_VREF;
+
+    /// Associate / AD5 / DIO5, Either, Associated indicator, analog input 5 or digital I/O 5.
+    static Pin * P15_ASSOCIATE_AD5_DIO5;
+
+    /// RTS(active low) / DIO6, Either, Request-to-send flow control, or digital I/O 6.
+    static Pin * P16_RTS_AD6_DIO6;
+
+    /// AD3 / DIO3 Either Analog input 3 or digital I/O 3.
+    static Pin * P17_AD3_DIO3;
+
+    /// AD2 / DIO2 Either Analog input 2 or digital I/O 2.
+    static Pin * P18_AD2_DIO2;
+
+    /// AD1 / DIO1 Either Analog input 1 or digital I/O 1.
+    static Pin * P19_AD1_DIO1;
+
+    /// AD0 / DIO0 Either Analog input 0, digital I/O 0.
+    static Pin * P20_AD0_DIO0;
+};
+
+#endif
\ No newline at end of file