BTstack for Nucleo F401RE/FRDM-KL46Z example program

Dependencies:   F401RE-USBHost mbed

The usage is the same as KL46Z-BTstack_example.
使い方はKL46Z-BTstack_exampleと同じです。
/media/uploads/va009039/f401re-btstack.jpg

Revision:
0:a05a07cd6fdf
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BTstack/hci_cmds.c	Mon Jun 09 09:03:25 2014 +0000
@@ -0,0 +1,679 @@
+/*
+ * Copyright (C) 2009-2012 by Matthias Ringwald
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the names of
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ * 4. Any redistribution, use, or modification is done solely for
+ *    personal benefit and not for any commercial purpose or for
+ *    monetary gain.
+ *
+ * THIS SOFTWARE IS PROVIDED BY MATTHIAS RINGWALD AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTHIAS
+ * RINGWALD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+ * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Please inquire about commercial licensing options at btstack@ringwald.ch
+ *
+ */
+
+/*
+ *  hci_cmds.c
+ *
+ *  Created by Matthias Ringwald on 7/23/09.
+ */
+
+#include <btstack/hci_cmds.h>
+
+#include <string.h>
+
+#include <btstack/sdp_util.h>
+#include "config.h"
+#include "hci.h"
+
+// calculate combined ogf/ocf value
+#define OPCODE(ogf, ocf) (ocf | ogf << 10)
+
+/**
+ * construct HCI Command based on template
+ *
+ * Format:
+ *   1,2,3,4: one to four byte value
+ *   H: HCI connection handle
+ *   B: Bluetooth Baseband Address (BD_ADDR)
+ *   E: Extended Inquiry Result
+ *   N: Name up to 248 chars, \0 terminated
+ *   P: 16 byte Pairing code
+ *   S: Service Record (Data Element Sequence)
+ */
+uint16_t hci_create_cmd_internal(uint8_t *hci_cmd_buffer, const hci_cmd_t *cmd, va_list argptr){
+    
+    hci_cmd_buffer[0] = cmd->opcode & 0xff;
+    hci_cmd_buffer[1] = cmd->opcode >> 8;
+    int pos = 3;
+    
+    const char *format = cmd->format;
+    uint16_t word;
+    uint32_t longword;
+    uint8_t * ptr;
+    while (*format) {
+        switch(*format) {
+            case '1': //  8 bit value
+            case '2': // 16 bit value
+            case 'H': // hci_handle
+                word = va_arg(argptr, int);  // minimal va_arg is int: 2 bytes on 8+16 bit CPUs
+                hci_cmd_buffer[pos++] = word & 0xff;
+                if (*format == '2') {
+                    hci_cmd_buffer[pos++] = word >> 8;
+                } else if (*format == 'H') {
+                    // TODO implement opaque client connection handles
+                    //      pass module handle for now
+                    hci_cmd_buffer[pos++] = word >> 8;
+                } 
+                break;
+            case '3':
+            case '4':
+                longword = va_arg(argptr, uint32_t);
+                // longword = va_arg(argptr, int);
+                hci_cmd_buffer[pos++] = longword;
+                hci_cmd_buffer[pos++] = longword >> 8;
+                hci_cmd_buffer[pos++] = longword >> 16;
+                if (*format == '4'){
+                    hci_cmd_buffer[pos++] = longword >> 24;
+                }
+                break;
+            case 'B': // bt-addr
+                ptr = va_arg(argptr, uint8_t *);
+                hci_cmd_buffer[pos++] = ptr[5];
+                hci_cmd_buffer[pos++] = ptr[4];
+                hci_cmd_buffer[pos++] = ptr[3];
+                hci_cmd_buffer[pos++] = ptr[2];
+                hci_cmd_buffer[pos++] = ptr[1];
+                hci_cmd_buffer[pos++] = ptr[0];
+                break;
+            case 'E': // Extended Inquiry Information 240 octets
+                ptr = va_arg(argptr, uint8_t *);
+                memcpy(&hci_cmd_buffer[pos], ptr, 240);
+                pos += 240;
+                break;
+            case 'N': { // UTF-8 string, null terminated
+                ptr = va_arg(argptr, uint8_t *);
+                uint16_t len = strlen((const char*) ptr);
+                if (len > 248) {
+                    len = 248;
+                }
+                memcpy(&hci_cmd_buffer[pos], ptr, len);
+                if (len < 248) {
+                    // fill remaining space with zeroes
+                    memset(&hci_cmd_buffer[pos+len], 0, 248-len);
+                }
+                pos += 248;
+                break;
+            }
+            case 'P': // 16 byte PIN code or link key
+                ptr = va_arg(argptr, uint8_t *);
+                memcpy(&hci_cmd_buffer[pos], ptr, 16);
+                pos += 16;
+                break;
+#ifdef HAVE_BLE
+            case 'A': // 31 bytes advertising data
+                ptr = va_arg(argptr, uint8_t *);
+                memcpy(&hci_cmd_buffer[pos], ptr, 31);
+                pos += 31;
+                break;
+#endif
+#ifdef HAVE_SDP
+            case 'S': { // Service Record (Data Element Sequence)
+                ptr = va_arg(argptr, uint8_t *);
+                uint16_t len = de_get_len(ptr);
+                memcpy(&hci_cmd_buffer[pos], ptr, len);
+                pos += len;
+                break;
+            }
+#endif
+            default:
+                break;
+        }
+        format++;
+    };
+    hci_cmd_buffer[2] = pos - 3;
+    return pos;
+}
+
+/**
+ * construct HCI Command based on template
+ *
+ * mainly calls hci_create_cmd_internal
+ */
+uint16_t hci_create_cmd(uint8_t *hci_cmd_buffer, hci_cmd_t *cmd, ...){
+    va_list argptr;
+    va_start(argptr, cmd);
+    uint16_t len = hci_create_cmd_internal(hci_cmd_buffer, cmd, argptr);
+    va_end(argptr);
+    return len;
+}
+
+
+/**
+ *  Link Control Commands 
+ */
+const hci_cmd_t hci_inquiry = {
+OPCODE(OGF_LINK_CONTROL, 0x01), "311"
+// LAP, Inquiry length, Num_responses
+};
+const hci_cmd_t hci_inquiry_cancel = {
+OPCODE(OGF_LINK_CONTROL, 0x02), ""
+// no params
+};
+const hci_cmd_t hci_create_connection = {
+OPCODE(OGF_LINK_CONTROL, 0x05), "B21121"
+// BD_ADDR, Packet_Type, Page_Scan_Repetition_Mode, Reserved, Clock_Offset, Allow_Role_Switch
+};
+const hci_cmd_t hci_disconnect = {
+OPCODE(OGF_LINK_CONTROL, 0x06), "H1"
+// Handle, Reason: 0x05, 0x13-0x15, 0x1a, 0x29
+// see Errors Codes in BT Spec Part D
+};
+const hci_cmd_t hci_create_connection_cancel = {
+OPCODE(OGF_LINK_CONTROL, 0x08), "B"
+// BD_ADDR
+};
+const hci_cmd_t hci_accept_connection_request = {
+OPCODE(OGF_LINK_CONTROL, 0x09), "B1"
+// BD_ADDR, Role: become master, stay slave
+};
+const hci_cmd_t hci_reject_connection_request = {
+OPCODE(OGF_LINK_CONTROL, 0x0a), "B1"
+// BD_ADDR, reason e.g. CONNECTION REJECTED DUE TO LIMITED RESOURCES (0x0d)
+};
+const hci_cmd_t hci_link_key_request_reply = {
+OPCODE(OGF_LINK_CONTROL, 0x0b), "BP"
+// BD_ADDR, LINK_KEY
+};
+const hci_cmd_t hci_link_key_request_negative_reply = {
+OPCODE(OGF_LINK_CONTROL, 0x0c), "B"
+// BD_ADDR
+};
+const hci_cmd_t hci_pin_code_request_reply = {
+OPCODE(OGF_LINK_CONTROL, 0x0d), "B1P"
+// BD_ADDR, pin length, PIN: c-string
+};
+const hci_cmd_t hci_pin_code_request_negative_reply = {
+OPCODE(OGF_LINK_CONTROL, 0x0e), "B"
+// BD_ADDR
+};
+const hci_cmd_t hci_authentication_requested = {
+OPCODE(OGF_LINK_CONTROL, 0x11), "H"
+// Handle
+};
+const hci_cmd_t hci_set_connection_encryption = {
+OPCODE(OGF_LINK_CONTROL, 0x13), "H1"
+// Handle, Encryption_Enable
+};
+const hci_cmd_t hci_change_connection_link_key = {
+OPCODE(OGF_LINK_CONTROL, 0x15), "H"
+// Handle
+};
+const hci_cmd_t hci_remote_name_request = {
+OPCODE(OGF_LINK_CONTROL, 0x19), "B112"
+// BD_ADDR, Page_Scan_Repetition_Mode, Reserved, Clock_Offset
+};
+const hci_cmd_t hci_remote_name_request_cancel = {
+OPCODE(OGF_LINK_CONTROL, 0x1A), "B"
+// BD_ADDR
+};
+
+/**
+ *  Link Policy Commands 
+ */
+const hci_cmd_t hci_sniff_mode = {
+OPCODE(OGF_LINK_POLICY, 0x03), "H2222"
+// handle, Sniff_Max_Interval, Sniff_Min_Interval, Sniff_Attempt, Sniff_Timeout:
+};
+const hci_cmd_t hci_qos_setup = {
+OPCODE(OGF_LINK_POLICY, 0x07), "H114444"
+// handle, flags, service_type, token rate (bytes/s), peak bandwith (bytes/s),
+// latency (us), delay_variation (us)
+};
+const hci_cmd_t hci_role_discovery = {
+OPCODE(OGF_LINK_POLICY, 0x09), "H"
+// handle
+};
+const hci_cmd_t hci_switch_role_command= {
+OPCODE(OGF_LINK_POLICY, 0x0b), "B1"
+// BD_ADDR, role: {0=master,1=slave}
+};
+const hci_cmd_t hci_read_link_policy_settings = {
+OPCODE(OGF_LINK_POLICY, 0x0c), "H"
+// handle 
+};
+const hci_cmd_t hci_write_link_policy_settings = {
+OPCODE(OGF_LINK_POLICY, 0x0d), "H2"
+// handle, settings
+};
+
+/**
+ *  Controller & Baseband Commands 
+ */
+const hci_cmd_t hci_set_event_mask = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x01), "44"
+// event_mask lower 4 octets, higher 4 bytes
+};
+const hci_cmd_t hci_reset = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x03), ""
+// no params
+};
+const hci_cmd_t hci_delete_stored_link_key = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x12), "B1"
+// BD_ADDR, Delete_All_Flag
+};
+const hci_cmd_t hci_write_local_name = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x13), "N"
+// Local name (UTF-8, Null Terminated, max 248 octets)
+};
+const hci_cmd_t hci_write_page_timeout = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x18), "2"
+// Page_Timeout * 0.625 ms
+};
+const hci_cmd_t hci_write_scan_enable = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x1A), "1"
+// Scan_enable: no, inq, page, inq+page
+};
+const hci_cmd_t hci_write_authentication_enable = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x20), "1"
+// Authentication_Enable
+};
+const hci_cmd_t hci_write_class_of_device = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x24), "3"
+// Class of Device
+};
+const hci_cmd_t hci_read_num_broadcast_retransmissions = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x29), ""
+};
+const hci_cmd_t hci_write_num_broadcast_retransmissions = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x2a), "1"
+// Num broadcast retransmissions (e.g. 0 for a single broadcast)
+};
+const hci_cmd_t hci_host_buffer_size = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x33), "2122"
+// Host_ACL_Data_Packet_Length:, Host_Synchronous_Data_Packet_Length:, Host_Total_Num_ACL_Data_Packets:, Host_Total_Num_Synchronous_Data_Packets:
+};
+const hci_cmd_t hci_read_link_supervision_timeout = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x36), "H"
+// handle
+};
+const hci_cmd_t hci_write_link_supervision_timeout = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x37), "H2"
+// handle, Range for N: 0x0001 Ð 0xFFFF Time (Range: 0.625ms Ð 40.9 sec)
+};
+const hci_cmd_t hci_write_inquiry_mode = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x45), "1"
+// Inquiry mode: 0x00 = standard, 0x01 = with RSSI, 0x02 = extended
+};
+const hci_cmd_t hci_write_extended_inquiry_response = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x52), "1E"
+// FEC_Required, Exstended Inquiry Response
+};
+const hci_cmd_t hci_write_simple_pairing_mode = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x56), "1"
+// mode: 0 = off, 1 = on
+};
+const hci_cmd_t hci_read_le_host_supported = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x6c), ""
+// params: none
+// return: status, le supported host, simultaneous le host
+};
+const hci_cmd_t hci_write_le_host_supported = {
+OPCODE(OGF_CONTROLLER_BASEBAND, 0x6d), "11"
+// param: le supported host, simultaneous le host
+// return: status
+};
+
+/**
+ * Informational Parameters
+ */
+const hci_cmd_t hci_read_local_supported_features = {
+OPCODE(OGF_INFORMATIONAL_PARAMETERS, 0x03), ""
+// no params
+};
+const hci_cmd_t hci_read_buffer_size = {
+OPCODE(OGF_INFORMATIONAL_PARAMETERS, 0x05), ""
+// no params
+};
+const hci_cmd_t hci_read_bd_addr = {
+OPCODE(OGF_INFORMATIONAL_PARAMETERS, 0x09), ""
+// no params
+};
+
+#ifdef HAVE_BLE
+/**
+ * Low Energy Commands
+ */
+const hci_cmd_t hci_le_set_event_mask = {
+OPCODE(OGF_LE_CONTROLLER, 0x01), "44"
+// params: event_mask lower 4 octets, higher 4 bytes
+// return: status
+};
+const hci_cmd_t hci_le_read_buffer_size = {
+OPCODE(OGF_LE_CONTROLLER, 0x02), ""
+// params: none
+// return: status, le acl data packet len (16), total num le acl data packets(8)
+};
+const hci_cmd_t hci_le_read_supported_features = {
+OPCODE(OGF_LE_CONTROLLER, 0x03), ""
+// params: none
+// return: LE_Features See [Vol 6] Part B, Section 4.6
+};
+const hci_cmd_t hci_le_set_random_address = {
+OPCODE(OGF_LE_CONTROLLER, 0x05), "B"
+// params: random device address
+// return: status
+};
+const hci_cmd_t hci_le_set_advertising_parameters = {
+OPCODE(OGF_LE_CONTROLLER, 0x06), "22111B11"
+// param: min advertising interval, [0x0020,0x4000], default: 0x0800, unit: 0.625 msec
+// param: max advertising interval, [0x0020,0x4000], default: 0x0800, unit: 0.625 msec
+// param: advertising type (enum from 0): ADV_IND, ADC_DIRECT_IND, ADV_SCAN_IND, ADV_NONCONN_IND
+// param: own address type (enum from 0): public device address, random device address
+// param: direct address type (enum from 0): public device address, random device address
+// param: direct address - public or random address of device to be connecteed
+// param: advertising channel map (flags): chan_37(1), chan_38(2), chan_39(4)
+// param: advertising filter policy (enum from 0): scan any conn any, scan whitelist, con any, scan any conn whitelist, scan whitelist, con whitelist
+// return: status
+};
+const hci_cmd_t hci_le_read_advertising_channel_tx_power = {
+OPCODE(OGF_LE_CONTROLLER, 0x07), ""
+// params: none
+// return: status, level [-20,10] signed int (8), units dBm
+};
+const hci_cmd_t hci_le_set_advertising_data= {
+OPCODE(OGF_LE_CONTROLLER, 0x08), "1A"
+// param: advertising data len
+// param: advertising data (31 bytes)
+// return: status
+};
+const hci_cmd_t hci_le_set_scan_response_data= {
+OPCODE(OGF_LE_CONTROLLER, 0x09), "1A"
+// param: scan response data len
+// param: scan response data (31 bytes)
+// return: status
+};
+const hci_cmd_t hci_le_set_advertise_enable = {
+OPCODE(OGF_LE_CONTROLLER, 0x0a), "1"
+// params: avertise enable: off (0), on (1)
+// return: status
+};
+const hci_cmd_t hci_le_set_scan_parameters = {
+OPCODE(OGF_LE_CONTROLLER, 0x0b), "12211"
+// param: le scan type: passive (0), active (1)
+// param: le scan interval [0x0004,0x4000], unit: 0.625 msec
+// param: le scan window   [0x0004,0x4000], unit: 0.625 msec
+// param: own address type: public (0), random (1)
+// param: scanning filter policy: any (0), only whitelist (1)
+// return: status
+};
+const hci_cmd_t hci_le_set_scan_enable = {
+OPCODE(OGF_LE_CONTROLLER, 0x0c), "11"
+// param: le scan enable:  disabled (0), enabled (1)
+// param: filter duplices: disabled (0), enabled (1)
+// return: status
+};
+const hci_cmd_t hci_le_create_connection= {
+OPCODE(OGF_LE_CONTROLLER, 0x0d), "2211B1222222"
+// param: le scan interval, [0x0004, 0x4000], unit: 0.625 msec
+// param: le scan window, [0x0004, 0x4000], unit: 0.625 msec
+// param: initiator filter policy: peer address type + peer address (0), whitelist (1)
+// param: peer address type: public (0), random (1)
+// param: peer address
+// param: own address type: public (0), random (1)
+// param: conn interval min, [0x0006, 0x0c80], unit: 1.25 msec
+// param: conn interval max, [0x0006, 0x0c80], unit: 1.25 msec
+// param: conn latency, number of connection events [0x0000, 0x01f4]
+// param: supervision timeout, [0x000a, 0x0c80], unit: 10 msec
+// param: minimum CE length, [0x0000, 0xffff], unit: 0.625 msec
+// return: none -> le create connection complete event
+};
+const hci_cmd_t hci_le_create_connection_cancel = {
+OPCODE(OGF_LE_CONTROLLER, 0x0e), ""
+// params: none
+// return: status
+};
+const hci_cmd_t hci_le_read_white_list_size = {
+OPCODE(OGF_LE_CONTROLLER, 0x0f), ""
+// params: none
+// return: status, number of entries in controller whitelist
+};
+const hci_cmd_t hci_le_clear_white_list = {
+OPCODE(OGF_LE_CONTROLLER, 0x10), ""
+// params: none
+// return: status
+};
+const hci_cmd_t hci_le_add_device_to_whitelist = {
+OPCODE(OGF_LE_CONTROLLER, 0x11), "1B"
+// param: address type: public (0), random (1)
+// param: address
+// return: status
+};
+const hci_cmd_t hci_le_remove_device_from_whitelist = {
+OPCODE(OGF_LE_CONTROLLER, 0x12), "1B"
+// param: address type: public (0), random (1)
+// param: address
+// return: status
+};
+const hci_cmd_t hci_le_connection_update = {
+OPCODE(OGF_LE_CONTROLLER, 0x13), "H222222"
+// param: conn handle
+// param: conn interval min, [0x0006,0x0c80], unit: 1.25 msec
+// param: conn interval max, [0x0006,0x0c80], unit: 1.25 msec
+// param: conn latency, [0x0000,0x03e8], number of connection events
+// param: supervision timeout, [0x000a,0x0c80], unit: 10 msec
+// param: minimum CE length, [0x0000,0xffff], unit: 0.625 msec
+// param: maximum CE length, [0x0000,0xffff], unit: 0.625 msec
+// return: none -> le connection update complete event
+};
+const hci_cmd_t hci_le_set_host_channel_classification = {
+OPCODE(OGF_LE_CONTROLLER, 0x14), "41"
+// param: channel map 37 bit, split into first 32 and higher 5 bits
+// return: status
+};
+const hci_cmd_t hci_le_read_channel_map = {
+OPCODE(OGF_LE_CONTROLLER, 0x15), "H"
+// params: connection handle
+// return: status, connection handle, channel map (5 bytes, 37 used)
+};
+const hci_cmd_t hci_le_read_remote_used_features = {
+OPCODE(OGF_LE_CONTROLLER, 0x16), "H"
+// params: connection handle
+// return: none -> le read remote used features complete event
+};
+const hci_cmd_t hci_le_encrypt = {
+OPCODE(OGF_LE_CONTROLLER, 0x17), "PP"
+// param: key (128) for AES-128
+// param: plain text (128) 
+// return: status, encrypted data (128)
+};
+const hci_cmd_t hci_le_rand = {
+OPCODE(OGF_LE_CONTROLLER, 0x18), ""
+// params: none
+// return: status, random number (64)
+};
+const hci_cmd_t hci_le_start_encryption = {
+OPCODE(OGF_LE_CONTROLLER, 0x19), "H442P"
+// param: connection handle
+// param: 64 bit random number lower  32 bit
+// param: 64 bit random number higher 32 bit
+// param: encryption diversifier (16)
+// param: long term key (128)
+// return: none -> encryption changed or encryption key refresh complete event
+};
+const hci_cmd_t hci_le_long_term_key_request_reply = {
+OPCODE(OGF_LE_CONTROLLER, 0x1a), "HP"
+// param: connection handle
+// param: long term key (128)
+// return: status, connection handle
+};
+const hci_cmd_t hci_le_long_term_key_negative_reply = {
+OPCODE(OGF_LE_CONTROLLER, 0x1b), "H"
+// param: connection handle
+// return: status, connection handle
+};
+const hci_cmd_t hci_le_read_supported_states = {
+OPCODE(OGF_LE_CONTROLLER, 0x1c), "H"
+// param: none
+// return: status, LE states (64)
+};
+const hci_cmd_t hci_le_receiver_test = {
+OPCODE(OGF_LE_CONTROLLER, 0x1d), "1"
+// param: rx frequency, [0x00 0x27], frequency (MHz): 2420 + N*2
+// return: status
+};
+const hci_cmd_t hci_le_transmitter_test = {
+    OPCODE(OGF_LE_CONTROLLER, 0x1e), "111"
+    // param: tx frequency, [0x00 0x27], frequency (MHz): 2420 + N*2
+    // param: lengh of test payload [0x00,0x25]
+    // param: packet payload [0,7] different patterns
+    // return: status
+};
+const hci_cmd_t hci_le_test_end = {
+    OPCODE(OGF_LE_CONTROLLER, 0x1f), "1"
+    // params: none
+    // return: status, number of packets (8)
+};
+#endif
+
+// BTstack commands
+const hci_cmd_t btstack_get_state = {
+OPCODE(OGF_BTSTACK, BTSTACK_GET_STATE), ""
+// no params -> 
+};
+
+const hci_cmd_t btstack_set_power_mode = {
+OPCODE(OGF_BTSTACK, BTSTACK_SET_POWER_MODE), "1"
+// mode: 0 = off, 1 = on
+};
+
+const hci_cmd_t btstack_set_acl_capture_mode = {
+OPCODE(OGF_BTSTACK, BTSTACK_SET_ACL_CAPTURE_MODE), "1"
+// mode: 0 = off, 1 = on
+};
+
+const hci_cmd_t btstack_get_version = {
+OPCODE(OGF_BTSTACK, BTSTACK_GET_VERSION), ""
+};
+
+const hci_cmd_t btstack_get_system_bluetooth_enabled = {
+OPCODE(OGF_BTSTACK, BTSTACK_GET_SYSTEM_BLUETOOTH_ENABLED), ""
+};
+
+const hci_cmd_t btstack_set_system_bluetooth_enabled = {
+OPCODE(OGF_BTSTACK, BTSTACK_SET_SYSTEM_BLUETOOTH_ENABLED), "1"
+};
+
+const hci_cmd_t btstack_set_discoverable = {
+OPCODE(OGF_BTSTACK, BTSTACK_SET_DISCOVERABLE), "1"
+};
+
+const hci_cmd_t btstack_set_bluetooth_enabled = {
+// only used by btstack config
+OPCODE(OGF_BTSTACK, BTSTACK_SET_BLUETOOTH_ENABLED), "1"
+};
+
+const hci_cmd_t l2cap_create_channel = {
+OPCODE(OGF_BTSTACK, L2CAP_CREATE_CHANNEL), "B2"
+// @param bd_addr(48), psm (16)
+};
+const hci_cmd_t l2cap_create_channel_mtu = {
+OPCODE(OGF_BTSTACK, L2CAP_CREATE_CHANNEL_MTU), "B22"
+// @param bd_addr(48), psm (16), mtu (16)
+};
+const hci_cmd_t l2cap_disconnect = {
+OPCODE(OGF_BTSTACK, L2CAP_DISCONNECT), "21"
+// @param channel(16), reason(8)
+};
+const hci_cmd_t l2cap_register_service = {
+OPCODE(OGF_BTSTACK, L2CAP_REGISTER_SERVICE), "22"
+// @param psm (16), mtu (16)
+};
+const hci_cmd_t l2cap_unregister_service = {
+OPCODE(OGF_BTSTACK, L2CAP_UNREGISTER_SERVICE), "2"
+// @param psm (16)
+};
+const hci_cmd_t l2cap_accept_connection = {
+OPCODE(OGF_BTSTACK, L2CAP_ACCEPT_CONNECTION), "2"
+// @param source cid (16)
+};
+const hci_cmd_t l2cap_decline_connection = {
+OPCODE(OGF_BTSTACK, L2CAP_DECLINE_CONNECTION), "21"
+// @param source cid (16), reason(8)
+};
+const hci_cmd_t sdp_register_service_record = {
+OPCODE(OGF_BTSTACK, SDP_REGISTER_SERVICE_RECORD), "S"
+// @param service record handle (DES)
+};
+const hci_cmd_t sdp_unregister_service_record = {
+OPCODE(OGF_BTSTACK, SDP_UNREGISTER_SERVICE_RECORD), "4"
+// @param service record handle (32)
+};
+
+// create rfcomm channel: @param bd_addr(48), channel (8)
+const hci_cmd_t rfcomm_create_channel = {
+	OPCODE(OGF_BTSTACK, RFCOMM_CREATE_CHANNEL), "B1"
+};
+// create rfcomm channel: @param bd_addr(48), channel (8), mtu (16), credits (8)
+const hci_cmd_t rfcomm_create_channel_with_initial_credits = {
+	OPCODE(OGF_BTSTACK, RFCOMM_CREATE_CHANNEL_WITH_CREDITS), "B121"
+};
+// grant credits: @param rfcomm_cid(16), credits (8)
+const hci_cmd_t rfcomm_grants_credits= {
+	OPCODE(OGF_BTSTACK, RFCOMM_GRANT_CREDITS), "21"
+};
+// disconnect rfcomm disconnect, @param rfcomm_cid(16), reason(8)
+const  hci_cmd_t rfcomm_disconnect = {
+	OPCODE(OGF_BTSTACK, RFCOMM_DISCONNECT), "21"
+};
+
+// register rfcomm service: @param channel(8), mtu (16)
+const hci_cmd_t rfcomm_register_service = {
+    OPCODE(OGF_BTSTACK, RFCOMM_REGISTER_SERVICE), "12"
+};
+// register rfcomm service: @param channel(8), mtu (16), initial credits (8)
+const hci_cmd_t rfcomm_register_service_with_initial_credits = {
+    OPCODE(OGF_BTSTACK, RFCOMM_REGISTER_SERVICE_WITH_CREDITS), "121"
+};
+
+// unregister rfcomm service, @param service_channel(16)
+const hci_cmd_t rfcomm_unregister_service = {
+    OPCODE(OGF_BTSTACK, RFCOMM_UNREGISTER_SERVICE), "2"
+};
+// accept connection @param source cid (16)
+const hci_cmd_t rfcomm_accept_connection = {
+    OPCODE(OGF_BTSTACK, RFCOMM_ACCEPT_CONNECTION), "2"
+};
+// decline connection @param source cid (16)
+const hci_cmd_t rfcomm_decline_connection = {
+    OPCODE(OGF_BTSTACK, RFCOMM_DECLINE_CONNECTION), "21"
+};
+// request persisten rfcomm channel number for named service
+const hci_cmd_t rfcomm_persistent_channel_for_service = {
+    OPCODE(OGF_BTSTACK, RFCOMM_PERSISTENT_CHANNEL), "N"
+};
+
+// register rfcomm service: @param channel(8), mtu (16), initial credits (8)
+extern const hci_cmd_t rfcomm_register_service_with_initial_credits;