Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/device/MK64F12/MK64F12_dma.h
- Committer:
- bogdanm
- Date:
- 2014-04-07
- Revision:
- 82:6473597d706e
File content as of revision 82:6473597d706e:
/*
* Copyright (c) 2014, Freescale Semiconductor, Inc.
* All rights reserved.
*
* THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
/*
* WARNING! DO NOT EDIT THIS FILE DIRECTLY!
*
* This file was generated automatically and any changes may be lost.
*/
#ifndef __HW_DMA_REGISTERS_H__
#define __HW_DMA_REGISTERS_H__
#include "regs.h"
/*
* MK64F12 DMA
*
* Enhanced direct memory access controller
*
* Registers defined in this header file:
* - HW_DMA_CR - Control Register
* - HW_DMA_ES - Error Status Register
* - HW_DMA_ERQ - Enable Request Register
* - HW_DMA_EEI - Enable Error Interrupt Register
* - HW_DMA_CEEI - Clear Enable Error Interrupt Register
* - HW_DMA_SEEI - Set Enable Error Interrupt Register
* - HW_DMA_CERQ - Clear Enable Request Register
* - HW_DMA_SERQ - Set Enable Request Register
* - HW_DMA_CDNE - Clear DONE Status Bit Register
* - HW_DMA_SSRT - Set START Bit Register
* - HW_DMA_CERR - Clear Error Register
* - HW_DMA_CINT - Clear Interrupt Request Register
* - HW_DMA_INT - Interrupt Request Register
* - HW_DMA_ERR - Error Register
* - HW_DMA_HRS - Hardware Request Status Register
* - HW_DMA_DCHPRIn - Channel n Priority Register
* - HW_DMA_TCDn_SADDR - TCD Source Address
* - HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset
* - HW_DMA_TCDn_ATTR - TCD Transfer Attributes
* - HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled)
* - HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled)
* - HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled)
* - HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment
* - HW_DMA_TCDn_DADDR - TCD Destination Address
* - HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset
* - HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled)
* - HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled)
* - HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address
* - HW_DMA_TCDn_CSR - TCD Control and Status
* - HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled)
* - HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled)
*
* - hw_dma_t - Struct containing all module registers.
*/
//! @name Module base addresses
//@{
#ifndef REGS_DMA_BASE
#define HW_DMA_INSTANCE_COUNT (1U) //!< Number of instances of the DMA module.
#define HW_DMA0 (0U) //!< Instance number for DMA.
#define REGS_DMA0_BASE (0x40008000U) //!< Base address for DMA.
//! @brief Table of base addresses for DMA instances.
static const uint32_t __g_regs_DMA_base_addresses[] = {
REGS_DMA0_BASE,
};
//! @brief Get the base address of DMA by instance number.
//! @param x DMA instance number, from 0 through 0.
#define REGS_DMA_BASE(x) (__g_regs_DMA_base_addresses[(x)])
//! @brief Get the instance number given a base address.
//! @param b Base address for an instance of DMA.
#define REGS_DMA_INSTANCE(b) ((b) == REGS_DMA0_BASE ? HW_DMA0 : 0)
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_CR - Control Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_CR - Control Register (RW)
*
* Reset value: 0x00000000U
*
* The CR defines the basic operating configuration of the DMA. Arbitration can
* be configured to use either a fixed-priority or a round-robin scheme. For
* fixed-priority arbitration, the highest priority channel requesting service is
* selected to execute. The channel priority registers assign the priorities; see
* the DCHPRIn registers. For round-robin arbitration, the channel priorities are
* ignored and channels are cycled through (from high to low channel number)
* without regard to priority. For correct operation, writes to the CR register must
* be performed only when the DMA channels are inactive; that is, when
* TCDn_CSR[ACTIVE] bits are cleared. Minor loop offsets are address offset values added to
* the final source address (TCDn_SADDR) or destination address (TCDn_DADDR) upon
* minor loop completion. When minor loop offsets are enabled, the minor loop
* offset (MLOFF) is added to the final source address (TCDn_SADDR), to the final
* destination address (TCDn_DADDR), or to both prior to the addresses being
* written back into the TCD. If the major loop is complete, the minor loop offset is
* ignored and the major loop address offsets (TCDn_SLAST and TCDn_DLAST_SGA) are
* used to compute the next TCDn_SADDR and TCDn_DADDR values. When minor loop
* mapping is enabled (EMLM is 1), TCDn word2 is redefined. A portion of TCDn word2
* is used to specify multiple fields: a source enable bit (SMLOE) to specify
* the minor loop offset should be applied to the source address (TCDn_SADDR) upon
* minor loop completion, a destination enable bit (DMLOE) to specify the minor
* loop offset should be applied to the destination address (TCDn_DADDR) upon
* minor loop completion, and the sign extended minor loop offset value (MLOFF). The
* same offset value (MLOFF) is used for both source and destination minor loop
* offsets. When either minor loop offset is enabled (SMLOE set or DMLOE set), the
* NBYTES field is reduced to 10 bits. When both minor loop offsets are disabled
* (SMLOE cleared and DMLOE cleared), the NBYTES field is a 30-bit vector. When
* minor loop mapping is disabled (EMLM is 0), all 32 bits of TCDn word2 are
* assigned to the NBYTES field.
*/
typedef union _hw_dma_cr
{
uint32_t U;
struct _hw_dma_cr_bitfields
{
uint32_t RESERVED0 : 1; //!< [0] Reserved.
uint32_t EDBG : 1; //!< [1] Enable Debug
uint32_t ERCA : 1; //!< [2] Enable Round Robin Channel Arbitration
uint32_t RESERVED1 : 1; //!< [3] Reserved.
uint32_t HOE : 1; //!< [4] Halt On Error
uint32_t HALT : 1; //!< [5] Halt DMA Operations
uint32_t CLM : 1; //!< [6] Continuous Link Mode
uint32_t EMLM : 1; //!< [7] Enable Minor Loop Mapping
uint32_t RESERVED2 : 8; //!< [15:8]
uint32_t ECX : 1; //!< [16] Error Cancel Transfer
uint32_t CX : 1; //!< [17] Cancel Transfer
uint32_t RESERVED3 : 14; //!< [31:18]
} B;
} hw_dma_cr_t;
#endif
/*!
* @name Constants and macros for entire DMA_CR register
*/
//@{
#define HW_DMA_CR_ADDR(x) (REGS_DMA_BASE(x) + 0x0U)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_CR(x) (*(__IO hw_dma_cr_t *) HW_DMA_CR_ADDR(x))
#define HW_DMA_CR_RD(x) (HW_DMA_CR(x).U)
#define HW_DMA_CR_WR(x, v) (HW_DMA_CR(x).U = (v))
#define HW_DMA_CR_SET(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) | (v)))
#define HW_DMA_CR_CLR(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) & ~(v)))
#define HW_DMA_CR_TOG(x, v) (HW_DMA_CR_WR(x, HW_DMA_CR_RD(x) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_CR bitfields
*/
/*!
* @name Register DMA_CR, field EDBG[1] (RW)
*
* Values:
* - 0 - When in debug mode, the DMA continues to operate.
* - 1 - When in debug mode, the DMA stalls the start of a new channel.
* Executing channels are allowed to complete. Channel execution resumes when the
* system exits debug mode or the EDBG bit is cleared.
*/
//@{
#define BP_DMA_CR_EDBG (1U) //!< Bit position for DMA_CR_EDBG.
#define BM_DMA_CR_EDBG (0x00000002U) //!< Bit mask for DMA_CR_EDBG.
#define BS_DMA_CR_EDBG (1U) //!< Bit field size in bits for DMA_CR_EDBG.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_CR_EDBG field.
#define BR_DMA_CR_EDBG(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EDBG))
#endif
//! @brief Format value for bitfield DMA_CR_EDBG.
#define BF_DMA_CR_EDBG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_EDBG), uint32_t) & BM_DMA_CR_EDBG)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EDBG field to a new value.
#define BW_DMA_CR_EDBG(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EDBG) = (v))
#endif
//@}
/*!
* @name Register DMA_CR, field ERCA[2] (RW)
*
* Values:
* - 0 - Fixed priority arbitration is used for channel selection .
* - 1 - Round robin arbitration is used for channel selection .
*/
//@{
#define BP_DMA_CR_ERCA (2U) //!< Bit position for DMA_CR_ERCA.
#define BM_DMA_CR_ERCA (0x00000004U) //!< Bit mask for DMA_CR_ERCA.
#define BS_DMA_CR_ERCA (1U) //!< Bit field size in bits for DMA_CR_ERCA.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_CR_ERCA field.
#define BR_DMA_CR_ERCA(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ERCA))
#endif
//! @brief Format value for bitfield DMA_CR_ERCA.
#define BF_DMA_CR_ERCA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_ERCA), uint32_t) & BM_DMA_CR_ERCA)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERCA field to a new value.
#define BW_DMA_CR_ERCA(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ERCA) = (v))
#endif
//@}
/*!
* @name Register DMA_CR, field HOE[4] (RW)
*
* Values:
* - 0 - Normal operation
* - 1 - Any error causes the HALT bit to set. Subsequently, all service
* requests are ignored until the HALT bit is cleared.
*/
//@{
#define BP_DMA_CR_HOE (4U) //!< Bit position for DMA_CR_HOE.
#define BM_DMA_CR_HOE (0x00000010U) //!< Bit mask for DMA_CR_HOE.
#define BS_DMA_CR_HOE (1U) //!< Bit field size in bits for DMA_CR_HOE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_CR_HOE field.
#define BR_DMA_CR_HOE(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HOE))
#endif
//! @brief Format value for bitfield DMA_CR_HOE.
#define BF_DMA_CR_HOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_HOE), uint32_t) & BM_DMA_CR_HOE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the HOE field to a new value.
#define BW_DMA_CR_HOE(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HOE) = (v))
#endif
//@}
/*!
* @name Register DMA_CR, field HALT[5] (RW)
*
* Values:
* - 0 - Normal operation
* - 1 - Stall the start of any new channels. Executing channels are allowed to
* complete. Channel execution resumes when this bit is cleared.
*/
//@{
#define BP_DMA_CR_HALT (5U) //!< Bit position for DMA_CR_HALT.
#define BM_DMA_CR_HALT (0x00000020U) //!< Bit mask for DMA_CR_HALT.
#define BS_DMA_CR_HALT (1U) //!< Bit field size in bits for DMA_CR_HALT.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_CR_HALT field.
#define BR_DMA_CR_HALT(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HALT))
#endif
//! @brief Format value for bitfield DMA_CR_HALT.
#define BF_DMA_CR_HALT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_HALT), uint32_t) & BM_DMA_CR_HALT)
#ifndef __LANGUAGE_ASM__
//! @brief Set the HALT field to a new value.
#define BW_DMA_CR_HALT(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_HALT) = (v))
#endif
//@}
/*!
* @name Register DMA_CR, field CLM[6] (RW)
*
* Values:
* - 0 - A minor loop channel link made to itself goes through channel
* arbitration before being activated again.
* - 1 - A minor loop channel link made to itself does not go through channel
* arbitration before being activated again. Upon minor loop completion, the
* channel activates again if that channel has a minor loop channel link
* enabled and the link channel is itself. This effectively applies the minor loop
* offsets and restarts the next minor loop.
*/
//@{
#define BP_DMA_CR_CLM (6U) //!< Bit position for DMA_CR_CLM.
#define BM_DMA_CR_CLM (0x00000040U) //!< Bit mask for DMA_CR_CLM.
#define BS_DMA_CR_CLM (1U) //!< Bit field size in bits for DMA_CR_CLM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_CR_CLM field.
#define BR_DMA_CR_CLM(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CLM))
#endif
//! @brief Format value for bitfield DMA_CR_CLM.
#define BF_DMA_CR_CLM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_CLM), uint32_t) & BM_DMA_CR_CLM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CLM field to a new value.
#define BW_DMA_CR_CLM(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CLM) = (v))
#endif
//@}
/*!
* @name Register DMA_CR, field EMLM[7] (RW)
*
* Values:
* - 0 - Disabled. TCDn.word2 is defined as a 32-bit NBYTES field.
* - 1 - Enabled. TCDn.word2 is redefined to include individual enable fields,
* an offset field, and the NBYTES field. The individual enable fields allow
* the minor loop offset to be applied to the source address, the destination
* address, or both. The NBYTES field is reduced when either offset is
* enabled.
*/
//@{
#define BP_DMA_CR_EMLM (7U) //!< Bit position for DMA_CR_EMLM.
#define BM_DMA_CR_EMLM (0x00000080U) //!< Bit mask for DMA_CR_EMLM.
#define BS_DMA_CR_EMLM (1U) //!< Bit field size in bits for DMA_CR_EMLM.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_CR_EMLM field.
#define BR_DMA_CR_EMLM(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EMLM))
#endif
//! @brief Format value for bitfield DMA_CR_EMLM.
#define BF_DMA_CR_EMLM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_EMLM), uint32_t) & BM_DMA_CR_EMLM)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EMLM field to a new value.
#define BW_DMA_CR_EMLM(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_EMLM) = (v))
#endif
//@}
/*!
* @name Register DMA_CR, field ECX[16] (RW)
*
* Values:
* - 0 - Normal operation
* - 1 - Cancel the remaining data transfer in the same fashion as the CX bit.
* Stop the executing channel and force the minor loop to finish. The cancel
* takes effect after the last write of the current read/write sequence. The
* ECX bit clears itself after the cancel is honored. In addition to
* cancelling the transfer, ECX treats the cancel as an error condition, thus updating
* the Error Status register (DMAx_ES) and generating an optional error
* interrupt.
*/
//@{
#define BP_DMA_CR_ECX (16U) //!< Bit position for DMA_CR_ECX.
#define BM_DMA_CR_ECX (0x00010000U) //!< Bit mask for DMA_CR_ECX.
#define BS_DMA_CR_ECX (1U) //!< Bit field size in bits for DMA_CR_ECX.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_CR_ECX field.
#define BR_DMA_CR_ECX(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ECX))
#endif
//! @brief Format value for bitfield DMA_CR_ECX.
#define BF_DMA_CR_ECX(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_ECX), uint32_t) & BM_DMA_CR_ECX)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ECX field to a new value.
#define BW_DMA_CR_ECX(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_ECX) = (v))
#endif
//@}
/*!
* @name Register DMA_CR, field CX[17] (RW)
*
* Values:
* - 0 - Normal operation
* - 1 - Cancel the remaining data transfer. Stop the executing channel and
* force the minor loop to finish. The cancel takes effect after the last write
* of the current read/write sequence. The CX bit clears itself after the
* cancel has been honored. This cancel retires the channel normally as if the
* minor loop was completed.
*/
//@{
#define BP_DMA_CR_CX (17U) //!< Bit position for DMA_CR_CX.
#define BM_DMA_CR_CX (0x00020000U) //!< Bit mask for DMA_CR_CX.
#define BS_DMA_CR_CX (1U) //!< Bit field size in bits for DMA_CR_CX.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_CR_CX field.
#define BR_DMA_CR_CX(x) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CX))
#endif
//! @brief Format value for bitfield DMA_CR_CX.
#define BF_DMA_CR_CX(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_CR_CX), uint32_t) & BM_DMA_CR_CX)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CX field to a new value.
#define BW_DMA_CR_CX(x, v) (BITBAND_ACCESS32(HW_DMA_CR_ADDR(x), BP_DMA_CR_CX) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_ES - Error Status Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_ES - Error Status Register (RO)
*
* Reset value: 0x00000000U
*
* The ES provides information concerning the last recorded channel error.
* Channel errors can be caused by: A configuration error, that is: An illegal setting
* in the transfer-control descriptor, or An illegal priority register setting
* in fixed-arbitration An error termination to a bus master read or write cycle
* See the Error Reporting and Handling section for more details.
*/
typedef union _hw_dma_es
{
uint32_t U;
struct _hw_dma_es_bitfields
{
uint32_t DBE : 1; //!< [0] Destination Bus Error
uint32_t SBE : 1; //!< [1] Source Bus Error
uint32_t SGE : 1; //!< [2] Scatter/Gather Configuration Error
uint32_t NCE : 1; //!< [3] NBYTES/CITER Configuration Error
uint32_t DOE : 1; //!< [4] Destination Offset Error
uint32_t DAE : 1; //!< [5] Destination Address Error
uint32_t SOE : 1; //!< [6] Source Offset Error
uint32_t SAE : 1; //!< [7] Source Address Error
uint32_t ERRCHN : 4; //!< [11:8] Error Channel Number or Canceled
//! Channel Number
uint32_t RESERVED0 : 2; //!< [13:12]
uint32_t CPE : 1; //!< [14] Channel Priority Error
uint32_t RESERVED1 : 1; //!< [15]
uint32_t ECX : 1; //!< [16] Transfer Canceled
uint32_t RESERVED2 : 14; //!< [30:17]
uint32_t VLD : 1; //!< [31]
} B;
} hw_dma_es_t;
#endif
/*!
* @name Constants and macros for entire DMA_ES register
*/
//@{
#define HW_DMA_ES_ADDR(x) (REGS_DMA_BASE(x) + 0x4U)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_ES(x) (*(__I hw_dma_es_t *) HW_DMA_ES_ADDR(x))
#define HW_DMA_ES_RD(x) (HW_DMA_ES(x).U)
#endif
//@}
/*
* Constants & macros for individual DMA_ES bitfields
*/
/*!
* @name Register DMA_ES, field DBE[0] (RO)
*
* Values:
* - 0 - No destination bus error
* - 1 - The last recorded error was a bus error on a destination write
*/
//@{
#define BP_DMA_ES_DBE (0U) //!< Bit position for DMA_ES_DBE.
#define BM_DMA_ES_DBE (0x00000001U) //!< Bit mask for DMA_ES_DBE.
#define BS_DMA_ES_DBE (1U) //!< Bit field size in bits for DMA_ES_DBE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_DBE field.
#define BR_DMA_ES_DBE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DBE))
#endif
//@}
/*!
* @name Register DMA_ES, field SBE[1] (RO)
*
* Values:
* - 0 - No source bus error
* - 1 - The last recorded error was a bus error on a source read
*/
//@{
#define BP_DMA_ES_SBE (1U) //!< Bit position for DMA_ES_SBE.
#define BM_DMA_ES_SBE (0x00000002U) //!< Bit mask for DMA_ES_SBE.
#define BS_DMA_ES_SBE (1U) //!< Bit field size in bits for DMA_ES_SBE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_SBE field.
#define BR_DMA_ES_SBE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SBE))
#endif
//@}
/*!
* @name Register DMA_ES, field SGE[2] (RO)
*
* Values:
* - 0 - No scatter/gather configuration error
* - 1 - The last recorded error was a configuration error detected in the
* TCDn_DLASTSGA field. This field is checked at the beginning of a scatter/gather
* operation after major loop completion if TCDn_CSR[ESG] is enabled.
* TCDn_DLASTSGA is not on a 32 byte boundary.
*/
//@{
#define BP_DMA_ES_SGE (2U) //!< Bit position for DMA_ES_SGE.
#define BM_DMA_ES_SGE (0x00000004U) //!< Bit mask for DMA_ES_SGE.
#define BS_DMA_ES_SGE (1U) //!< Bit field size in bits for DMA_ES_SGE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_SGE field.
#define BR_DMA_ES_SGE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SGE))
#endif
//@}
/*!
* @name Register DMA_ES, field NCE[3] (RO)
*
* Values:
* - 0 - No NBYTES/CITER configuration error
* - 1 - The last recorded error was a configuration error detected in the
* TCDn_NBYTES or TCDn_CITER fields. TCDn_NBYTES is not a multiple of
* TCDn_ATTR[SSIZE] and TCDn_ATTR[DSIZE], or TCDn_CITER[CITER] is equal to zero, or
* TCDn_CITER[ELINK] is not equal to TCDn_BITER[ELINK]
*/
//@{
#define BP_DMA_ES_NCE (3U) //!< Bit position for DMA_ES_NCE.
#define BM_DMA_ES_NCE (0x00000008U) //!< Bit mask for DMA_ES_NCE.
#define BS_DMA_ES_NCE (1U) //!< Bit field size in bits for DMA_ES_NCE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_NCE field.
#define BR_DMA_ES_NCE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_NCE))
#endif
//@}
/*!
* @name Register DMA_ES, field DOE[4] (RO)
*
* Values:
* - 0 - No destination offset configuration error
* - 1 - The last recorded error was a configuration error detected in the
* TCDn_DOFF field. TCDn_DOFF is inconsistent with TCDn_ATTR[DSIZE].
*/
//@{
#define BP_DMA_ES_DOE (4U) //!< Bit position for DMA_ES_DOE.
#define BM_DMA_ES_DOE (0x00000010U) //!< Bit mask for DMA_ES_DOE.
#define BS_DMA_ES_DOE (1U) //!< Bit field size in bits for DMA_ES_DOE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_DOE field.
#define BR_DMA_ES_DOE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DOE))
#endif
//@}
/*!
* @name Register DMA_ES, field DAE[5] (RO)
*
* Values:
* - 0 - No destination address configuration error
* - 1 - The last recorded error was a configuration error detected in the
* TCDn_DADDR field. TCDn_DADDR is inconsistent with TCDn_ATTR[DSIZE].
*/
//@{
#define BP_DMA_ES_DAE (5U) //!< Bit position for DMA_ES_DAE.
#define BM_DMA_ES_DAE (0x00000020U) //!< Bit mask for DMA_ES_DAE.
#define BS_DMA_ES_DAE (1U) //!< Bit field size in bits for DMA_ES_DAE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_DAE field.
#define BR_DMA_ES_DAE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_DAE))
#endif
//@}
/*!
* @name Register DMA_ES, field SOE[6] (RO)
*
* Values:
* - 0 - No source offset configuration error
* - 1 - The last recorded error was a configuration error detected in the
* TCDn_SOFF field. TCDn_SOFF is inconsistent with TCDn_ATTR[SSIZE].
*/
//@{
#define BP_DMA_ES_SOE (6U) //!< Bit position for DMA_ES_SOE.
#define BM_DMA_ES_SOE (0x00000040U) //!< Bit mask for DMA_ES_SOE.
#define BS_DMA_ES_SOE (1U) //!< Bit field size in bits for DMA_ES_SOE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_SOE field.
#define BR_DMA_ES_SOE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SOE))
#endif
//@}
/*!
* @name Register DMA_ES, field SAE[7] (RO)
*
* Values:
* - 0 - No source address configuration error.
* - 1 - The last recorded error was a configuration error detected in the
* TCDn_SADDR field. TCDn_SADDR is inconsistent with TCDn_ATTR[SSIZE].
*/
//@{
#define BP_DMA_ES_SAE (7U) //!< Bit position for DMA_ES_SAE.
#define BM_DMA_ES_SAE (0x00000080U) //!< Bit mask for DMA_ES_SAE.
#define BS_DMA_ES_SAE (1U) //!< Bit field size in bits for DMA_ES_SAE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_SAE field.
#define BR_DMA_ES_SAE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_SAE))
#endif
//@}
/*!
* @name Register DMA_ES, field ERRCHN[11:8] (RO)
*
* The channel number of the last recorded error (excluding CPE errors) or last
* recorded error canceled transfer.
*/
//@{
#define BP_DMA_ES_ERRCHN (8U) //!< Bit position for DMA_ES_ERRCHN.
#define BM_DMA_ES_ERRCHN (0x00000F00U) //!< Bit mask for DMA_ES_ERRCHN.
#define BS_DMA_ES_ERRCHN (4U) //!< Bit field size in bits for DMA_ES_ERRCHN.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_ERRCHN field.
#define BR_DMA_ES_ERRCHN(x) (HW_DMA_ES(x).B.ERRCHN)
#endif
//@}
/*!
* @name Register DMA_ES, field CPE[14] (RO)
*
* Values:
* - 0 - No channel priority error
* - 1 - The last recorded error was a configuration error in the channel
* priorities . Channel priorities are not unique.
*/
//@{
#define BP_DMA_ES_CPE (14U) //!< Bit position for DMA_ES_CPE.
#define BM_DMA_ES_CPE (0x00004000U) //!< Bit mask for DMA_ES_CPE.
#define BS_DMA_ES_CPE (1U) //!< Bit field size in bits for DMA_ES_CPE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_CPE field.
#define BR_DMA_ES_CPE(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_CPE))
#endif
//@}
/*!
* @name Register DMA_ES, field ECX[16] (RO)
*
* Values:
* - 0 - No canceled transfers
* - 1 - The last recorded entry was a canceled transfer by the error cancel
* transfer input
*/
//@{
#define BP_DMA_ES_ECX (16U) //!< Bit position for DMA_ES_ECX.
#define BM_DMA_ES_ECX (0x00010000U) //!< Bit mask for DMA_ES_ECX.
#define BS_DMA_ES_ECX (1U) //!< Bit field size in bits for DMA_ES_ECX.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_ECX field.
#define BR_DMA_ES_ECX(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_ECX))
#endif
//@}
/*!
* @name Register DMA_ES, field VLD[31] (RO)
*
* Logical OR of all ERR status bits
*
* Values:
* - 0 - No ERR bits are set
* - 1 - At least one ERR bit is set indicating a valid error exists that has
* not been cleared
*/
//@{
#define BP_DMA_ES_VLD (31U) //!< Bit position for DMA_ES_VLD.
#define BM_DMA_ES_VLD (0x80000000U) //!< Bit mask for DMA_ES_VLD.
#define BS_DMA_ES_VLD (1U) //!< Bit field size in bits for DMA_ES_VLD.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ES_VLD field.
#define BR_DMA_ES_VLD(x) (BITBAND_ACCESS32(HW_DMA_ES_ADDR(x), BP_DMA_ES_VLD))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_ERQ - Enable Request Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_ERQ - Enable Request Register (RW)
*
* Reset value: 0x00000000U
*
* The ERQ register provides a bit map for the 16 implemented channels to enable
* the request signal for each channel. The state of any given channel enable is
* directly affected by writes to this register; it is also affected by writes
* to the SERQ and CERQ. The {S,C}ERQ registers are provided so the request enable
* for a single channel can easily be modified without needing to perform a
* read-modify-write sequence to the ERQ. DMA request input signals and this enable
* request flag must be asserted before a channel's hardware service request is
* accepted. The state of the DMA enable request flag does not affect a channel
* service request made explicitly through software or a linked channel request.
*/
typedef union _hw_dma_erq
{
uint32_t U;
struct _hw_dma_erq_bitfields
{
uint32_t ERQ0 : 1; //!< [0] Enable DMA Request 0
uint32_t ERQ1 : 1; //!< [1] Enable DMA Request 1
uint32_t ERQ2 : 1; //!< [2] Enable DMA Request 2
uint32_t ERQ3 : 1; //!< [3] Enable DMA Request 3
uint32_t ERQ4 : 1; //!< [4] Enable DMA Request 4
uint32_t ERQ5 : 1; //!< [5] Enable DMA Request 5
uint32_t ERQ6 : 1; //!< [6] Enable DMA Request 6
uint32_t ERQ7 : 1; //!< [7] Enable DMA Request 7
uint32_t ERQ8 : 1; //!< [8] Enable DMA Request 8
uint32_t ERQ9 : 1; //!< [9] Enable DMA Request 9
uint32_t ERQ10 : 1; //!< [10] Enable DMA Request 10
uint32_t ERQ11 : 1; //!< [11] Enable DMA Request 11
uint32_t ERQ12 : 1; //!< [12] Enable DMA Request 12
uint32_t ERQ13 : 1; //!< [13] Enable DMA Request 13
uint32_t ERQ14 : 1; //!< [14] Enable DMA Request 14
uint32_t ERQ15 : 1; //!< [15] Enable DMA Request 15
uint32_t RESERVED0 : 16; //!< [31:16]
} B;
} hw_dma_erq_t;
#endif
/*!
* @name Constants and macros for entire DMA_ERQ register
*/
//@{
#define HW_DMA_ERQ_ADDR(x) (REGS_DMA_BASE(x) + 0xCU)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_ERQ(x) (*(__IO hw_dma_erq_t *) HW_DMA_ERQ_ADDR(x))
#define HW_DMA_ERQ_RD(x) (HW_DMA_ERQ(x).U)
#define HW_DMA_ERQ_WR(x, v) (HW_DMA_ERQ(x).U = (v))
#define HW_DMA_ERQ_SET(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) | (v)))
#define HW_DMA_ERQ_CLR(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) & ~(v)))
#define HW_DMA_ERQ_TOG(x, v) (HW_DMA_ERQ_WR(x, HW_DMA_ERQ_RD(x) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_ERQ bitfields
*/
/*!
* @name Register DMA_ERQ, field ERQ0[0] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ0 (0U) //!< Bit position for DMA_ERQ_ERQ0.
#define BM_DMA_ERQ_ERQ0 (0x00000001U) //!< Bit mask for DMA_ERQ_ERQ0.
#define BS_DMA_ERQ_ERQ0 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ0 field.
#define BR_DMA_ERQ_ERQ0(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ0))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ0.
#define BF_DMA_ERQ_ERQ0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ0), uint32_t) & BM_DMA_ERQ_ERQ0)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ0 field to a new value.
#define BW_DMA_ERQ_ERQ0(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ0) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ1[1] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ1 (1U) //!< Bit position for DMA_ERQ_ERQ1.
#define BM_DMA_ERQ_ERQ1 (0x00000002U) //!< Bit mask for DMA_ERQ_ERQ1.
#define BS_DMA_ERQ_ERQ1 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ1 field.
#define BR_DMA_ERQ_ERQ1(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ1))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ1.
#define BF_DMA_ERQ_ERQ1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ1), uint32_t) & BM_DMA_ERQ_ERQ1)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ1 field to a new value.
#define BW_DMA_ERQ_ERQ1(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ1) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ2[2] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ2 (2U) //!< Bit position for DMA_ERQ_ERQ2.
#define BM_DMA_ERQ_ERQ2 (0x00000004U) //!< Bit mask for DMA_ERQ_ERQ2.
#define BS_DMA_ERQ_ERQ2 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ2 field.
#define BR_DMA_ERQ_ERQ2(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ2))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ2.
#define BF_DMA_ERQ_ERQ2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ2), uint32_t) & BM_DMA_ERQ_ERQ2)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ2 field to a new value.
#define BW_DMA_ERQ_ERQ2(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ2) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ3[3] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ3 (3U) //!< Bit position for DMA_ERQ_ERQ3.
#define BM_DMA_ERQ_ERQ3 (0x00000008U) //!< Bit mask for DMA_ERQ_ERQ3.
#define BS_DMA_ERQ_ERQ3 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ3 field.
#define BR_DMA_ERQ_ERQ3(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ3))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ3.
#define BF_DMA_ERQ_ERQ3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ3), uint32_t) & BM_DMA_ERQ_ERQ3)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ3 field to a new value.
#define BW_DMA_ERQ_ERQ3(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ3) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ4[4] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ4 (4U) //!< Bit position for DMA_ERQ_ERQ4.
#define BM_DMA_ERQ_ERQ4 (0x00000010U) //!< Bit mask for DMA_ERQ_ERQ4.
#define BS_DMA_ERQ_ERQ4 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ4 field.
#define BR_DMA_ERQ_ERQ4(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ4))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ4.
#define BF_DMA_ERQ_ERQ4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ4), uint32_t) & BM_DMA_ERQ_ERQ4)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ4 field to a new value.
#define BW_DMA_ERQ_ERQ4(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ4) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ5[5] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ5 (5U) //!< Bit position for DMA_ERQ_ERQ5.
#define BM_DMA_ERQ_ERQ5 (0x00000020U) //!< Bit mask for DMA_ERQ_ERQ5.
#define BS_DMA_ERQ_ERQ5 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ5 field.
#define BR_DMA_ERQ_ERQ5(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ5))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ5.
#define BF_DMA_ERQ_ERQ5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ5), uint32_t) & BM_DMA_ERQ_ERQ5)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ5 field to a new value.
#define BW_DMA_ERQ_ERQ5(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ5) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ6[6] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ6 (6U) //!< Bit position for DMA_ERQ_ERQ6.
#define BM_DMA_ERQ_ERQ6 (0x00000040U) //!< Bit mask for DMA_ERQ_ERQ6.
#define BS_DMA_ERQ_ERQ6 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ6 field.
#define BR_DMA_ERQ_ERQ6(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ6))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ6.
#define BF_DMA_ERQ_ERQ6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ6), uint32_t) & BM_DMA_ERQ_ERQ6)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ6 field to a new value.
#define BW_DMA_ERQ_ERQ6(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ6) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ7[7] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ7 (7U) //!< Bit position for DMA_ERQ_ERQ7.
#define BM_DMA_ERQ_ERQ7 (0x00000080U) //!< Bit mask for DMA_ERQ_ERQ7.
#define BS_DMA_ERQ_ERQ7 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ7 field.
#define BR_DMA_ERQ_ERQ7(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ7))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ7.
#define BF_DMA_ERQ_ERQ7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ7), uint32_t) & BM_DMA_ERQ_ERQ7)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ7 field to a new value.
#define BW_DMA_ERQ_ERQ7(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ7) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ8[8] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ8 (8U) //!< Bit position for DMA_ERQ_ERQ8.
#define BM_DMA_ERQ_ERQ8 (0x00000100U) //!< Bit mask for DMA_ERQ_ERQ8.
#define BS_DMA_ERQ_ERQ8 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ8.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ8 field.
#define BR_DMA_ERQ_ERQ8(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ8))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ8.
#define BF_DMA_ERQ_ERQ8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ8), uint32_t) & BM_DMA_ERQ_ERQ8)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ8 field to a new value.
#define BW_DMA_ERQ_ERQ8(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ8) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ9[9] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ9 (9U) //!< Bit position for DMA_ERQ_ERQ9.
#define BM_DMA_ERQ_ERQ9 (0x00000200U) //!< Bit mask for DMA_ERQ_ERQ9.
#define BS_DMA_ERQ_ERQ9 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ9.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ9 field.
#define BR_DMA_ERQ_ERQ9(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ9))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ9.
#define BF_DMA_ERQ_ERQ9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ9), uint32_t) & BM_DMA_ERQ_ERQ9)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ9 field to a new value.
#define BW_DMA_ERQ_ERQ9(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ9) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ10[10] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ10 (10U) //!< Bit position for DMA_ERQ_ERQ10.
#define BM_DMA_ERQ_ERQ10 (0x00000400U) //!< Bit mask for DMA_ERQ_ERQ10.
#define BS_DMA_ERQ_ERQ10 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ10.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ10 field.
#define BR_DMA_ERQ_ERQ10(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ10))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ10.
#define BF_DMA_ERQ_ERQ10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ10), uint32_t) & BM_DMA_ERQ_ERQ10)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ10 field to a new value.
#define BW_DMA_ERQ_ERQ10(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ10) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ11[11] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ11 (11U) //!< Bit position for DMA_ERQ_ERQ11.
#define BM_DMA_ERQ_ERQ11 (0x00000800U) //!< Bit mask for DMA_ERQ_ERQ11.
#define BS_DMA_ERQ_ERQ11 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ11.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ11 field.
#define BR_DMA_ERQ_ERQ11(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ11))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ11.
#define BF_DMA_ERQ_ERQ11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ11), uint32_t) & BM_DMA_ERQ_ERQ11)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ11 field to a new value.
#define BW_DMA_ERQ_ERQ11(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ11) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ12[12] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ12 (12U) //!< Bit position for DMA_ERQ_ERQ12.
#define BM_DMA_ERQ_ERQ12 (0x00001000U) //!< Bit mask for DMA_ERQ_ERQ12.
#define BS_DMA_ERQ_ERQ12 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ12.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ12 field.
#define BR_DMA_ERQ_ERQ12(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ12))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ12.
#define BF_DMA_ERQ_ERQ12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ12), uint32_t) & BM_DMA_ERQ_ERQ12)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ12 field to a new value.
#define BW_DMA_ERQ_ERQ12(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ12) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ13[13] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ13 (13U) //!< Bit position for DMA_ERQ_ERQ13.
#define BM_DMA_ERQ_ERQ13 (0x00002000U) //!< Bit mask for DMA_ERQ_ERQ13.
#define BS_DMA_ERQ_ERQ13 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ13.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ13 field.
#define BR_DMA_ERQ_ERQ13(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ13))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ13.
#define BF_DMA_ERQ_ERQ13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ13), uint32_t) & BM_DMA_ERQ_ERQ13)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ13 field to a new value.
#define BW_DMA_ERQ_ERQ13(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ13) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ14[14] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ14 (14U) //!< Bit position for DMA_ERQ_ERQ14.
#define BM_DMA_ERQ_ERQ14 (0x00004000U) //!< Bit mask for DMA_ERQ_ERQ14.
#define BS_DMA_ERQ_ERQ14 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ14.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ14 field.
#define BR_DMA_ERQ_ERQ14(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ14))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ14.
#define BF_DMA_ERQ_ERQ14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ14), uint32_t) & BM_DMA_ERQ_ERQ14)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ14 field to a new value.
#define BW_DMA_ERQ_ERQ14(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ14) = (v))
#endif
//@}
/*!
* @name Register DMA_ERQ, field ERQ15[15] (RW)
*
* Values:
* - 0 - The DMA request signal for the corresponding channel is disabled
* - 1 - The DMA request signal for the corresponding channel is enabled
*/
//@{
#define BP_DMA_ERQ_ERQ15 (15U) //!< Bit position for DMA_ERQ_ERQ15.
#define BM_DMA_ERQ_ERQ15 (0x00008000U) //!< Bit mask for DMA_ERQ_ERQ15.
#define BS_DMA_ERQ_ERQ15 (1U) //!< Bit field size in bits for DMA_ERQ_ERQ15.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERQ_ERQ15 field.
#define BR_DMA_ERQ_ERQ15(x) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ15))
#endif
//! @brief Format value for bitfield DMA_ERQ_ERQ15.
#define BF_DMA_ERQ_ERQ15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERQ_ERQ15), uint32_t) & BM_DMA_ERQ_ERQ15)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERQ15 field to a new value.
#define BW_DMA_ERQ_ERQ15(x, v) (BITBAND_ACCESS32(HW_DMA_ERQ_ADDR(x), BP_DMA_ERQ_ERQ15) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_EEI - Enable Error Interrupt Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_EEI - Enable Error Interrupt Register (RW)
*
* Reset value: 0x00000000U
*
* The EEI register provides a bit map for the 16 channels to enable the error
* interrupt signal for each channel. The state of any given channel's error
* interrupt enable is directly affected by writes to this register; it is also
* affected by writes to the SEEI and CEEI. The {S,C}EEI are provided so the error
* interrupt enable for a single channel can easily be modified without the need to
* perform a read-modify-write sequence to the EEI register. The DMA error
* indicator and the error interrupt enable flag must be asserted before an error
* interrupt request for a given channel is asserted to the interrupt controller.
*/
typedef union _hw_dma_eei
{
uint32_t U;
struct _hw_dma_eei_bitfields
{
uint32_t EEI0 : 1; //!< [0] Enable Error Interrupt 0
uint32_t EEI1 : 1; //!< [1] Enable Error Interrupt 1
uint32_t EEI2 : 1; //!< [2] Enable Error Interrupt 2
uint32_t EEI3 : 1; //!< [3] Enable Error Interrupt 3
uint32_t EEI4 : 1; //!< [4] Enable Error Interrupt 4
uint32_t EEI5 : 1; //!< [5] Enable Error Interrupt 5
uint32_t EEI6 : 1; //!< [6] Enable Error Interrupt 6
uint32_t EEI7 : 1; //!< [7] Enable Error Interrupt 7
uint32_t EEI8 : 1; //!< [8] Enable Error Interrupt 8
uint32_t EEI9 : 1; //!< [9] Enable Error Interrupt 9
uint32_t EEI10 : 1; //!< [10] Enable Error Interrupt 10
uint32_t EEI11 : 1; //!< [11] Enable Error Interrupt 11
uint32_t EEI12 : 1; //!< [12] Enable Error Interrupt 12
uint32_t EEI13 : 1; //!< [13] Enable Error Interrupt 13
uint32_t EEI14 : 1; //!< [14] Enable Error Interrupt 14
uint32_t EEI15 : 1; //!< [15] Enable Error Interrupt 15
uint32_t RESERVED0 : 16; //!< [31:16]
} B;
} hw_dma_eei_t;
#endif
/*!
* @name Constants and macros for entire DMA_EEI register
*/
//@{
#define HW_DMA_EEI_ADDR(x) (REGS_DMA_BASE(x) + 0x14U)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_EEI(x) (*(__IO hw_dma_eei_t *) HW_DMA_EEI_ADDR(x))
#define HW_DMA_EEI_RD(x) (HW_DMA_EEI(x).U)
#define HW_DMA_EEI_WR(x, v) (HW_DMA_EEI(x).U = (v))
#define HW_DMA_EEI_SET(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) | (v)))
#define HW_DMA_EEI_CLR(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) & ~(v)))
#define HW_DMA_EEI_TOG(x, v) (HW_DMA_EEI_WR(x, HW_DMA_EEI_RD(x) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_EEI bitfields
*/
/*!
* @name Register DMA_EEI, field EEI0[0] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI0 (0U) //!< Bit position for DMA_EEI_EEI0.
#define BM_DMA_EEI_EEI0 (0x00000001U) //!< Bit mask for DMA_EEI_EEI0.
#define BS_DMA_EEI_EEI0 (1U) //!< Bit field size in bits for DMA_EEI_EEI0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI0 field.
#define BR_DMA_EEI_EEI0(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI0))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI0.
#define BF_DMA_EEI_EEI0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI0), uint32_t) & BM_DMA_EEI_EEI0)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI0 field to a new value.
#define BW_DMA_EEI_EEI0(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI0) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI1[1] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI1 (1U) //!< Bit position for DMA_EEI_EEI1.
#define BM_DMA_EEI_EEI1 (0x00000002U) //!< Bit mask for DMA_EEI_EEI1.
#define BS_DMA_EEI_EEI1 (1U) //!< Bit field size in bits for DMA_EEI_EEI1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI1 field.
#define BR_DMA_EEI_EEI1(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI1))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI1.
#define BF_DMA_EEI_EEI1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI1), uint32_t) & BM_DMA_EEI_EEI1)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI1 field to a new value.
#define BW_DMA_EEI_EEI1(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI1) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI2[2] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI2 (2U) //!< Bit position for DMA_EEI_EEI2.
#define BM_DMA_EEI_EEI2 (0x00000004U) //!< Bit mask for DMA_EEI_EEI2.
#define BS_DMA_EEI_EEI2 (1U) //!< Bit field size in bits for DMA_EEI_EEI2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI2 field.
#define BR_DMA_EEI_EEI2(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI2))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI2.
#define BF_DMA_EEI_EEI2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI2), uint32_t) & BM_DMA_EEI_EEI2)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI2 field to a new value.
#define BW_DMA_EEI_EEI2(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI2) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI3[3] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI3 (3U) //!< Bit position for DMA_EEI_EEI3.
#define BM_DMA_EEI_EEI3 (0x00000008U) //!< Bit mask for DMA_EEI_EEI3.
#define BS_DMA_EEI_EEI3 (1U) //!< Bit field size in bits for DMA_EEI_EEI3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI3 field.
#define BR_DMA_EEI_EEI3(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI3))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI3.
#define BF_DMA_EEI_EEI3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI3), uint32_t) & BM_DMA_EEI_EEI3)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI3 field to a new value.
#define BW_DMA_EEI_EEI3(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI3) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI4[4] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI4 (4U) //!< Bit position for DMA_EEI_EEI4.
#define BM_DMA_EEI_EEI4 (0x00000010U) //!< Bit mask for DMA_EEI_EEI4.
#define BS_DMA_EEI_EEI4 (1U) //!< Bit field size in bits for DMA_EEI_EEI4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI4 field.
#define BR_DMA_EEI_EEI4(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI4))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI4.
#define BF_DMA_EEI_EEI4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI4), uint32_t) & BM_DMA_EEI_EEI4)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI4 field to a new value.
#define BW_DMA_EEI_EEI4(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI4) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI5[5] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI5 (5U) //!< Bit position for DMA_EEI_EEI5.
#define BM_DMA_EEI_EEI5 (0x00000020U) //!< Bit mask for DMA_EEI_EEI5.
#define BS_DMA_EEI_EEI5 (1U) //!< Bit field size in bits for DMA_EEI_EEI5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI5 field.
#define BR_DMA_EEI_EEI5(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI5))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI5.
#define BF_DMA_EEI_EEI5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI5), uint32_t) & BM_DMA_EEI_EEI5)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI5 field to a new value.
#define BW_DMA_EEI_EEI5(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI5) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI6[6] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI6 (6U) //!< Bit position for DMA_EEI_EEI6.
#define BM_DMA_EEI_EEI6 (0x00000040U) //!< Bit mask for DMA_EEI_EEI6.
#define BS_DMA_EEI_EEI6 (1U) //!< Bit field size in bits for DMA_EEI_EEI6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI6 field.
#define BR_DMA_EEI_EEI6(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI6))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI6.
#define BF_DMA_EEI_EEI6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI6), uint32_t) & BM_DMA_EEI_EEI6)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI6 field to a new value.
#define BW_DMA_EEI_EEI6(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI6) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI7[7] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI7 (7U) //!< Bit position for DMA_EEI_EEI7.
#define BM_DMA_EEI_EEI7 (0x00000080U) //!< Bit mask for DMA_EEI_EEI7.
#define BS_DMA_EEI_EEI7 (1U) //!< Bit field size in bits for DMA_EEI_EEI7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI7 field.
#define BR_DMA_EEI_EEI7(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI7))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI7.
#define BF_DMA_EEI_EEI7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI7), uint32_t) & BM_DMA_EEI_EEI7)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI7 field to a new value.
#define BW_DMA_EEI_EEI7(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI7) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI8[8] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI8 (8U) //!< Bit position for DMA_EEI_EEI8.
#define BM_DMA_EEI_EEI8 (0x00000100U) //!< Bit mask for DMA_EEI_EEI8.
#define BS_DMA_EEI_EEI8 (1U) //!< Bit field size in bits for DMA_EEI_EEI8.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI8 field.
#define BR_DMA_EEI_EEI8(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI8))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI8.
#define BF_DMA_EEI_EEI8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI8), uint32_t) & BM_DMA_EEI_EEI8)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI8 field to a new value.
#define BW_DMA_EEI_EEI8(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI8) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI9[9] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI9 (9U) //!< Bit position for DMA_EEI_EEI9.
#define BM_DMA_EEI_EEI9 (0x00000200U) //!< Bit mask for DMA_EEI_EEI9.
#define BS_DMA_EEI_EEI9 (1U) //!< Bit field size in bits for DMA_EEI_EEI9.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI9 field.
#define BR_DMA_EEI_EEI9(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI9))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI9.
#define BF_DMA_EEI_EEI9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI9), uint32_t) & BM_DMA_EEI_EEI9)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI9 field to a new value.
#define BW_DMA_EEI_EEI9(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI9) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI10[10] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI10 (10U) //!< Bit position for DMA_EEI_EEI10.
#define BM_DMA_EEI_EEI10 (0x00000400U) //!< Bit mask for DMA_EEI_EEI10.
#define BS_DMA_EEI_EEI10 (1U) //!< Bit field size in bits for DMA_EEI_EEI10.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI10 field.
#define BR_DMA_EEI_EEI10(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI10))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI10.
#define BF_DMA_EEI_EEI10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI10), uint32_t) & BM_DMA_EEI_EEI10)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI10 field to a new value.
#define BW_DMA_EEI_EEI10(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI10) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI11[11] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI11 (11U) //!< Bit position for DMA_EEI_EEI11.
#define BM_DMA_EEI_EEI11 (0x00000800U) //!< Bit mask for DMA_EEI_EEI11.
#define BS_DMA_EEI_EEI11 (1U) //!< Bit field size in bits for DMA_EEI_EEI11.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI11 field.
#define BR_DMA_EEI_EEI11(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI11))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI11.
#define BF_DMA_EEI_EEI11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI11), uint32_t) & BM_DMA_EEI_EEI11)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI11 field to a new value.
#define BW_DMA_EEI_EEI11(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI11) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI12[12] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI12 (12U) //!< Bit position for DMA_EEI_EEI12.
#define BM_DMA_EEI_EEI12 (0x00001000U) //!< Bit mask for DMA_EEI_EEI12.
#define BS_DMA_EEI_EEI12 (1U) //!< Bit field size in bits for DMA_EEI_EEI12.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI12 field.
#define BR_DMA_EEI_EEI12(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI12))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI12.
#define BF_DMA_EEI_EEI12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI12), uint32_t) & BM_DMA_EEI_EEI12)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI12 field to a new value.
#define BW_DMA_EEI_EEI12(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI12) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI13[13] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI13 (13U) //!< Bit position for DMA_EEI_EEI13.
#define BM_DMA_EEI_EEI13 (0x00002000U) //!< Bit mask for DMA_EEI_EEI13.
#define BS_DMA_EEI_EEI13 (1U) //!< Bit field size in bits for DMA_EEI_EEI13.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI13 field.
#define BR_DMA_EEI_EEI13(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI13))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI13.
#define BF_DMA_EEI_EEI13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI13), uint32_t) & BM_DMA_EEI_EEI13)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI13 field to a new value.
#define BW_DMA_EEI_EEI13(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI13) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI14[14] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI14 (14U) //!< Bit position for DMA_EEI_EEI14.
#define BM_DMA_EEI_EEI14 (0x00004000U) //!< Bit mask for DMA_EEI_EEI14.
#define BS_DMA_EEI_EEI14 (1U) //!< Bit field size in bits for DMA_EEI_EEI14.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI14 field.
#define BR_DMA_EEI_EEI14(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI14))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI14.
#define BF_DMA_EEI_EEI14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI14), uint32_t) & BM_DMA_EEI_EEI14)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI14 field to a new value.
#define BW_DMA_EEI_EEI14(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI14) = (v))
#endif
//@}
/*!
* @name Register DMA_EEI, field EEI15[15] (RW)
*
* Values:
* - 0 - The error signal for corresponding channel does not generate an error
* interrupt
* - 1 - The assertion of the error signal for corresponding channel generates
* an error interrupt request
*/
//@{
#define BP_DMA_EEI_EEI15 (15U) //!< Bit position for DMA_EEI_EEI15.
#define BM_DMA_EEI_EEI15 (0x00008000U) //!< Bit mask for DMA_EEI_EEI15.
#define BS_DMA_EEI_EEI15 (1U) //!< Bit field size in bits for DMA_EEI_EEI15.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_EEI_EEI15 field.
#define BR_DMA_EEI_EEI15(x) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI15))
#endif
//! @brief Format value for bitfield DMA_EEI_EEI15.
#define BF_DMA_EEI_EEI15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_EEI_EEI15), uint32_t) & BM_DMA_EEI_EEI15)
#ifndef __LANGUAGE_ASM__
//! @brief Set the EEI15 field to a new value.
#define BW_DMA_EEI_EEI15(x, v) (BITBAND_ACCESS32(HW_DMA_EEI_ADDR(x), BP_DMA_EEI_EEI15) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_CEEI - Clear Enable Error Interrupt Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_CEEI - Clear Enable Error Interrupt Register (WO)
*
* Reset value: 0x00U
*
* The CEEI provides a simple memory-mapped mechanism to clear a given bit in
* the EEI to disable the error interrupt for a given channel. The data value on a
* register write causes the corresponding bit in the EEI to be cleared. Setting
* the CAEE bit provides a global clear function, forcing the EEI contents to be
* cleared, disabling all DMA request inputs. If the NOP bit is set, the command
* is ignored. This allows you to write multiple-byte registers as a 32-bit word.
* Reads of this register return all zeroes.
*/
typedef union _hw_dma_ceei
{
uint8_t U;
struct _hw_dma_ceei_bitfields
{
uint8_t CEEI : 4; //!< [3:0] Clear Enable Error Interrupt
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t CAEE : 1; //!< [6] Clear All Enable Error Interrupts
uint8_t NOP : 1; //!< [7] No Op enable
} B;
} hw_dma_ceei_t;
#endif
/*!
* @name Constants and macros for entire DMA_CEEI register
*/
//@{
#define HW_DMA_CEEI_ADDR(x) (REGS_DMA_BASE(x) + 0x18U)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_CEEI(x) (*(__O hw_dma_ceei_t *) HW_DMA_CEEI_ADDR(x))
#define HW_DMA_CEEI_RD(x) (HW_DMA_CEEI(x).U)
#define HW_DMA_CEEI_WR(x, v) (HW_DMA_CEEI(x).U = (v))
#endif
//@}
/*
* Constants & macros for individual DMA_CEEI bitfields
*/
/*!
* @name Register DMA_CEEI, field CEEI[3:0] (WORZ)
*
* Clears the corresponding bit in EEI
*/
//@{
#define BP_DMA_CEEI_CEEI (0U) //!< Bit position for DMA_CEEI_CEEI.
#define BM_DMA_CEEI_CEEI (0x0FU) //!< Bit mask for DMA_CEEI_CEEI.
#define BS_DMA_CEEI_CEEI (4U) //!< Bit field size in bits for DMA_CEEI_CEEI.
//! @brief Format value for bitfield DMA_CEEI_CEEI.
#define BF_DMA_CEEI_CEEI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CEEI_CEEI), uint8_t) & BM_DMA_CEEI_CEEI)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CEEI field to a new value.
#define BW_DMA_CEEI_CEEI(x, v) (HW_DMA_CEEI_WR(x, (HW_DMA_CEEI_RD(x) & ~BM_DMA_CEEI_CEEI) | BF_DMA_CEEI_CEEI(v)))
#endif
//@}
/*!
* @name Register DMA_CEEI, field CAEE[6] (WORZ)
*
* Values:
* - 0 - Clear only the EEI bit specified in the CEEI field
* - 1 - Clear all bits in EEI
*/
//@{
#define BP_DMA_CEEI_CAEE (6U) //!< Bit position for DMA_CEEI_CAEE.
#define BM_DMA_CEEI_CAEE (0x40U) //!< Bit mask for DMA_CEEI_CAEE.
#define BS_DMA_CEEI_CAEE (1U) //!< Bit field size in bits for DMA_CEEI_CAEE.
//! @brief Format value for bitfield DMA_CEEI_CAEE.
#define BF_DMA_CEEI_CAEE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CEEI_CAEE), uint8_t) & BM_DMA_CEEI_CAEE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CAEE field to a new value.
#define BW_DMA_CEEI_CAEE(x, v) (BITBAND_ACCESS8(HW_DMA_CEEI_ADDR(x), BP_DMA_CEEI_CAEE) = (v))
#endif
//@}
/*!
* @name Register DMA_CEEI, field NOP[7] (WORZ)
*
* Values:
* - 0 - Normal operation
* - 1 - No operation, ignore the other bits in this register
*/
//@{
#define BP_DMA_CEEI_NOP (7U) //!< Bit position for DMA_CEEI_NOP.
#define BM_DMA_CEEI_NOP (0x80U) //!< Bit mask for DMA_CEEI_NOP.
#define BS_DMA_CEEI_NOP (1U) //!< Bit field size in bits for DMA_CEEI_NOP.
//! @brief Format value for bitfield DMA_CEEI_NOP.
#define BF_DMA_CEEI_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CEEI_NOP), uint8_t) & BM_DMA_CEEI_NOP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NOP field to a new value.
#define BW_DMA_CEEI_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CEEI_ADDR(x), BP_DMA_CEEI_NOP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_SEEI - Set Enable Error Interrupt Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_SEEI - Set Enable Error Interrupt Register (WO)
*
* Reset value: 0x00U
*
* The SEEI provides a simple memory-mapped mechanism to set a given bit in the
* EEI to enable the error interrupt for a given channel. The data value on a
* register write causes the corresponding bit in the EEI to be set. Setting the
* SAEE bit provides a global set function, forcing the entire EEI contents to be
* set. If the NOP bit is set, the command is ignored. This allows you to write
* multiple-byte registers as a 32-bit word. Reads of this register return all
* zeroes.
*/
typedef union _hw_dma_seei
{
uint8_t U;
struct _hw_dma_seei_bitfields
{
uint8_t SEEI : 4; //!< [3:0] Set Enable Error Interrupt
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t SAEE : 1; //!< [6] Sets All Enable Error Interrupts
uint8_t NOP : 1; //!< [7] No Op enable
} B;
} hw_dma_seei_t;
#endif
/*!
* @name Constants and macros for entire DMA_SEEI register
*/
//@{
#define HW_DMA_SEEI_ADDR(x) (REGS_DMA_BASE(x) + 0x19U)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_SEEI(x) (*(__O hw_dma_seei_t *) HW_DMA_SEEI_ADDR(x))
#define HW_DMA_SEEI_RD(x) (HW_DMA_SEEI(x).U)
#define HW_DMA_SEEI_WR(x, v) (HW_DMA_SEEI(x).U = (v))
#endif
//@}
/*
* Constants & macros for individual DMA_SEEI bitfields
*/
/*!
* @name Register DMA_SEEI, field SEEI[3:0] (WORZ)
*
* Sets the corresponding bit in EEI
*/
//@{
#define BP_DMA_SEEI_SEEI (0U) //!< Bit position for DMA_SEEI_SEEI.
#define BM_DMA_SEEI_SEEI (0x0FU) //!< Bit mask for DMA_SEEI_SEEI.
#define BS_DMA_SEEI_SEEI (4U) //!< Bit field size in bits for DMA_SEEI_SEEI.
//! @brief Format value for bitfield DMA_SEEI_SEEI.
#define BF_DMA_SEEI_SEEI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SEEI_SEEI), uint8_t) & BM_DMA_SEEI_SEEI)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SEEI field to a new value.
#define BW_DMA_SEEI_SEEI(x, v) (HW_DMA_SEEI_WR(x, (HW_DMA_SEEI_RD(x) & ~BM_DMA_SEEI_SEEI) | BF_DMA_SEEI_SEEI(v)))
#endif
//@}
/*!
* @name Register DMA_SEEI, field SAEE[6] (WORZ)
*
* Values:
* - 0 - Set only the EEI bit specified in the SEEI field.
* - 1 - Sets all bits in EEI
*/
//@{
#define BP_DMA_SEEI_SAEE (6U) //!< Bit position for DMA_SEEI_SAEE.
#define BM_DMA_SEEI_SAEE (0x40U) //!< Bit mask for DMA_SEEI_SAEE.
#define BS_DMA_SEEI_SAEE (1U) //!< Bit field size in bits for DMA_SEEI_SAEE.
//! @brief Format value for bitfield DMA_SEEI_SAEE.
#define BF_DMA_SEEI_SAEE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SEEI_SAEE), uint8_t) & BM_DMA_SEEI_SAEE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SAEE field to a new value.
#define BW_DMA_SEEI_SAEE(x, v) (BITBAND_ACCESS8(HW_DMA_SEEI_ADDR(x), BP_DMA_SEEI_SAEE) = (v))
#endif
//@}
/*!
* @name Register DMA_SEEI, field NOP[7] (WORZ)
*
* Values:
* - 0 - Normal operation
* - 1 - No operation, ignore the other bits in this register
*/
//@{
#define BP_DMA_SEEI_NOP (7U) //!< Bit position for DMA_SEEI_NOP.
#define BM_DMA_SEEI_NOP (0x80U) //!< Bit mask for DMA_SEEI_NOP.
#define BS_DMA_SEEI_NOP (1U) //!< Bit field size in bits for DMA_SEEI_NOP.
//! @brief Format value for bitfield DMA_SEEI_NOP.
#define BF_DMA_SEEI_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SEEI_NOP), uint8_t) & BM_DMA_SEEI_NOP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NOP field to a new value.
#define BW_DMA_SEEI_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SEEI_ADDR(x), BP_DMA_SEEI_NOP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_CERQ - Clear Enable Request Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_CERQ - Clear Enable Request Register (WO)
*
* Reset value: 0x00U
*
* The CERQ provides a simple memory-mapped mechanism to clear a given bit in
* the ERQ to disable the DMA request for a given channel. The data value on a
* register write causes the corresponding bit in the ERQ to be cleared. Setting the
* CAER bit provides a global clear function, forcing the entire contents of the
* ERQ to be cleared, disabling all DMA request inputs. If NOP is set, the
* command is ignored. This allows you to write multiple-byte registers as a 32-bit
* word. Reads of this register return all zeroes.
*/
typedef union _hw_dma_cerq
{
uint8_t U;
struct _hw_dma_cerq_bitfields
{
uint8_t CERQ : 4; //!< [3:0] Clear Enable Request
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t CAER : 1; //!< [6] Clear All Enable Requests
uint8_t NOP : 1; //!< [7] No Op enable
} B;
} hw_dma_cerq_t;
#endif
/*!
* @name Constants and macros for entire DMA_CERQ register
*/
//@{
#define HW_DMA_CERQ_ADDR(x) (REGS_DMA_BASE(x) + 0x1AU)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_CERQ(x) (*(__O hw_dma_cerq_t *) HW_DMA_CERQ_ADDR(x))
#define HW_DMA_CERQ_RD(x) (HW_DMA_CERQ(x).U)
#define HW_DMA_CERQ_WR(x, v) (HW_DMA_CERQ(x).U = (v))
#endif
//@}
/*
* Constants & macros for individual DMA_CERQ bitfields
*/
/*!
* @name Register DMA_CERQ, field CERQ[3:0] (WORZ)
*
* Clears the corresponding bit in ERQ
*/
//@{
#define BP_DMA_CERQ_CERQ (0U) //!< Bit position for DMA_CERQ_CERQ.
#define BM_DMA_CERQ_CERQ (0x0FU) //!< Bit mask for DMA_CERQ_CERQ.
#define BS_DMA_CERQ_CERQ (4U) //!< Bit field size in bits for DMA_CERQ_CERQ.
//! @brief Format value for bitfield DMA_CERQ_CERQ.
#define BF_DMA_CERQ_CERQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERQ_CERQ), uint8_t) & BM_DMA_CERQ_CERQ)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CERQ field to a new value.
#define BW_DMA_CERQ_CERQ(x, v) (HW_DMA_CERQ_WR(x, (HW_DMA_CERQ_RD(x) & ~BM_DMA_CERQ_CERQ) | BF_DMA_CERQ_CERQ(v)))
#endif
//@}
/*!
* @name Register DMA_CERQ, field CAER[6] (WORZ)
*
* Values:
* - 0 - Clear only the ERQ bit specified in the CERQ field
* - 1 - Clear all bits in ERQ
*/
//@{
#define BP_DMA_CERQ_CAER (6U) //!< Bit position for DMA_CERQ_CAER.
#define BM_DMA_CERQ_CAER (0x40U) //!< Bit mask for DMA_CERQ_CAER.
#define BS_DMA_CERQ_CAER (1U) //!< Bit field size in bits for DMA_CERQ_CAER.
//! @brief Format value for bitfield DMA_CERQ_CAER.
#define BF_DMA_CERQ_CAER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERQ_CAER), uint8_t) & BM_DMA_CERQ_CAER)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CAER field to a new value.
#define BW_DMA_CERQ_CAER(x, v) (BITBAND_ACCESS8(HW_DMA_CERQ_ADDR(x), BP_DMA_CERQ_CAER) = (v))
#endif
//@}
/*!
* @name Register DMA_CERQ, field NOP[7] (WORZ)
*
* Values:
* - 0 - Normal operation
* - 1 - No operation, ignore the other bits in this register
*/
//@{
#define BP_DMA_CERQ_NOP (7U) //!< Bit position for DMA_CERQ_NOP.
#define BM_DMA_CERQ_NOP (0x80U) //!< Bit mask for DMA_CERQ_NOP.
#define BS_DMA_CERQ_NOP (1U) //!< Bit field size in bits for DMA_CERQ_NOP.
//! @brief Format value for bitfield DMA_CERQ_NOP.
#define BF_DMA_CERQ_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERQ_NOP), uint8_t) & BM_DMA_CERQ_NOP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NOP field to a new value.
#define BW_DMA_CERQ_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CERQ_ADDR(x), BP_DMA_CERQ_NOP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_SERQ - Set Enable Request Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_SERQ - Set Enable Request Register (WO)
*
* Reset value: 0x00U
*
* The SERQ provides a simple memory-mapped mechanism to set a given bit in the
* ERQ to enable the DMA request for a given channel. The data value on a
* register write causes the corresponding bit in the ERQ to be set. Setting the SAER
* bit provides a global set function, forcing the entire contents of ERQ to be
* set. If the NOP bit is set, the command is ignored. This allows you to write
* multiple-byte registers as a 32-bit word. Reads of this register return all zeroes.
*/
typedef union _hw_dma_serq
{
uint8_t U;
struct _hw_dma_serq_bitfields
{
uint8_t SERQ : 4; //!< [3:0] Set enable request
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t SAER : 1; //!< [6] Set All Enable Requests
uint8_t NOP : 1; //!< [7] No Op enable
} B;
} hw_dma_serq_t;
#endif
/*!
* @name Constants and macros for entire DMA_SERQ register
*/
//@{
#define HW_DMA_SERQ_ADDR(x) (REGS_DMA_BASE(x) + 0x1BU)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_SERQ(x) (*(__O hw_dma_serq_t *) HW_DMA_SERQ_ADDR(x))
#define HW_DMA_SERQ_RD(x) (HW_DMA_SERQ(x).U)
#define HW_DMA_SERQ_WR(x, v) (HW_DMA_SERQ(x).U = (v))
#endif
//@}
/*
* Constants & macros for individual DMA_SERQ bitfields
*/
/*!
* @name Register DMA_SERQ, field SERQ[3:0] (WORZ)
*
* Sets the corresponding bit in ERQ
*/
//@{
#define BP_DMA_SERQ_SERQ (0U) //!< Bit position for DMA_SERQ_SERQ.
#define BM_DMA_SERQ_SERQ (0x0FU) //!< Bit mask for DMA_SERQ_SERQ.
#define BS_DMA_SERQ_SERQ (4U) //!< Bit field size in bits for DMA_SERQ_SERQ.
//! @brief Format value for bitfield DMA_SERQ_SERQ.
#define BF_DMA_SERQ_SERQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SERQ_SERQ), uint8_t) & BM_DMA_SERQ_SERQ)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SERQ field to a new value.
#define BW_DMA_SERQ_SERQ(x, v) (HW_DMA_SERQ_WR(x, (HW_DMA_SERQ_RD(x) & ~BM_DMA_SERQ_SERQ) | BF_DMA_SERQ_SERQ(v)))
#endif
//@}
/*!
* @name Register DMA_SERQ, field SAER[6] (WORZ)
*
* Values:
* - 0 - Set only the ERQ bit specified in the SERQ field
* - 1 - Set all bits in ERQ
*/
//@{
#define BP_DMA_SERQ_SAER (6U) //!< Bit position for DMA_SERQ_SAER.
#define BM_DMA_SERQ_SAER (0x40U) //!< Bit mask for DMA_SERQ_SAER.
#define BS_DMA_SERQ_SAER (1U) //!< Bit field size in bits for DMA_SERQ_SAER.
//! @brief Format value for bitfield DMA_SERQ_SAER.
#define BF_DMA_SERQ_SAER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SERQ_SAER), uint8_t) & BM_DMA_SERQ_SAER)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SAER field to a new value.
#define BW_DMA_SERQ_SAER(x, v) (BITBAND_ACCESS8(HW_DMA_SERQ_ADDR(x), BP_DMA_SERQ_SAER) = (v))
#endif
//@}
/*!
* @name Register DMA_SERQ, field NOP[7] (WORZ)
*
* Values:
* - 0 - Normal operation
* - 1 - No operation, ignore the other bits in this register
*/
//@{
#define BP_DMA_SERQ_NOP (7U) //!< Bit position for DMA_SERQ_NOP.
#define BM_DMA_SERQ_NOP (0x80U) //!< Bit mask for DMA_SERQ_NOP.
#define BS_DMA_SERQ_NOP (1U) //!< Bit field size in bits for DMA_SERQ_NOP.
//! @brief Format value for bitfield DMA_SERQ_NOP.
#define BF_DMA_SERQ_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SERQ_NOP), uint8_t) & BM_DMA_SERQ_NOP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NOP field to a new value.
#define BW_DMA_SERQ_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SERQ_ADDR(x), BP_DMA_SERQ_NOP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_CDNE - Clear DONE Status Bit Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_CDNE - Clear DONE Status Bit Register (WO)
*
* Reset value: 0x00U
*
* The CDNE provides a simple memory-mapped mechanism to clear the DONE bit in
* the TCD of the given channel. The data value on a register write causes the
* DONE bit in the corresponding transfer control descriptor to be cleared. Setting
* the CADN bit provides a global clear function, forcing all DONE bits to be
* cleared. If the NOP bit is set, the command is ignored. This allows you to write
* multiple-byte registers as a 32-bit word. Reads of this register return all
* zeroes.
*/
typedef union _hw_dma_cdne
{
uint8_t U;
struct _hw_dma_cdne_bitfields
{
uint8_t CDNE : 4; //!< [3:0] Clear DONE Bit
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t CADN : 1; //!< [6] Clears All DONE Bits
uint8_t NOP : 1; //!< [7] No Op enable
} B;
} hw_dma_cdne_t;
#endif
/*!
* @name Constants and macros for entire DMA_CDNE register
*/
//@{
#define HW_DMA_CDNE_ADDR(x) (REGS_DMA_BASE(x) + 0x1CU)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_CDNE(x) (*(__O hw_dma_cdne_t *) HW_DMA_CDNE_ADDR(x))
#define HW_DMA_CDNE_RD(x) (HW_DMA_CDNE(x).U)
#define HW_DMA_CDNE_WR(x, v) (HW_DMA_CDNE(x).U = (v))
#endif
//@}
/*
* Constants & macros for individual DMA_CDNE bitfields
*/
/*!
* @name Register DMA_CDNE, field CDNE[3:0] (WORZ)
*
* Clears the corresponding bit in TCDn_CSR[DONE]
*/
//@{
#define BP_DMA_CDNE_CDNE (0U) //!< Bit position for DMA_CDNE_CDNE.
#define BM_DMA_CDNE_CDNE (0x0FU) //!< Bit mask for DMA_CDNE_CDNE.
#define BS_DMA_CDNE_CDNE (4U) //!< Bit field size in bits for DMA_CDNE_CDNE.
//! @brief Format value for bitfield DMA_CDNE_CDNE.
#define BF_DMA_CDNE_CDNE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CDNE_CDNE), uint8_t) & BM_DMA_CDNE_CDNE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CDNE field to a new value.
#define BW_DMA_CDNE_CDNE(x, v) (HW_DMA_CDNE_WR(x, (HW_DMA_CDNE_RD(x) & ~BM_DMA_CDNE_CDNE) | BF_DMA_CDNE_CDNE(v)))
#endif
//@}
/*!
* @name Register DMA_CDNE, field CADN[6] (WORZ)
*
* Values:
* - 0 - Clears only the TCDn_CSR[DONE] bit specified in the CDNE field
* - 1 - Clears all bits in TCDn_CSR[DONE]
*/
//@{
#define BP_DMA_CDNE_CADN (6U) //!< Bit position for DMA_CDNE_CADN.
#define BM_DMA_CDNE_CADN (0x40U) //!< Bit mask for DMA_CDNE_CADN.
#define BS_DMA_CDNE_CADN (1U) //!< Bit field size in bits for DMA_CDNE_CADN.
//! @brief Format value for bitfield DMA_CDNE_CADN.
#define BF_DMA_CDNE_CADN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CDNE_CADN), uint8_t) & BM_DMA_CDNE_CADN)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CADN field to a new value.
#define BW_DMA_CDNE_CADN(x, v) (BITBAND_ACCESS8(HW_DMA_CDNE_ADDR(x), BP_DMA_CDNE_CADN) = (v))
#endif
//@}
/*!
* @name Register DMA_CDNE, field NOP[7] (WORZ)
*
* Values:
* - 0 - Normal operation
* - 1 - No operation, ignore the other bits in this register
*/
//@{
#define BP_DMA_CDNE_NOP (7U) //!< Bit position for DMA_CDNE_NOP.
#define BM_DMA_CDNE_NOP (0x80U) //!< Bit mask for DMA_CDNE_NOP.
#define BS_DMA_CDNE_NOP (1U) //!< Bit field size in bits for DMA_CDNE_NOP.
//! @brief Format value for bitfield DMA_CDNE_NOP.
#define BF_DMA_CDNE_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CDNE_NOP), uint8_t) & BM_DMA_CDNE_NOP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NOP field to a new value.
#define BW_DMA_CDNE_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CDNE_ADDR(x), BP_DMA_CDNE_NOP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_SSRT - Set START Bit Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_SSRT - Set START Bit Register (WO)
*
* Reset value: 0x00U
*
* The SSRT provides a simple memory-mapped mechanism to set the START bit in
* the TCD of the given channel. The data value on a register write causes the
* START bit in the corresponding transfer control descriptor to be set. Setting the
* SAST bit provides a global set function, forcing all START bits to be set. If
* the NOP bit is set, the command is ignored. This allows you to write
* multiple-byte registers as a 32-bit word. Reads of this register return all zeroes.
*/
typedef union _hw_dma_ssrt
{
uint8_t U;
struct _hw_dma_ssrt_bitfields
{
uint8_t SSRT : 4; //!< [3:0] Set START Bit
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t SAST : 1; //!< [6] Set All START Bits (activates all channels)
uint8_t NOP : 1; //!< [7] No Op enable
} B;
} hw_dma_ssrt_t;
#endif
/*!
* @name Constants and macros for entire DMA_SSRT register
*/
//@{
#define HW_DMA_SSRT_ADDR(x) (REGS_DMA_BASE(x) + 0x1DU)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_SSRT(x) (*(__O hw_dma_ssrt_t *) HW_DMA_SSRT_ADDR(x))
#define HW_DMA_SSRT_RD(x) (HW_DMA_SSRT(x).U)
#define HW_DMA_SSRT_WR(x, v) (HW_DMA_SSRT(x).U = (v))
#endif
//@}
/*
* Constants & macros for individual DMA_SSRT bitfields
*/
/*!
* @name Register DMA_SSRT, field SSRT[3:0] (WORZ)
*
* Sets the corresponding bit in TCDn_CSR[START]
*/
//@{
#define BP_DMA_SSRT_SSRT (0U) //!< Bit position for DMA_SSRT_SSRT.
#define BM_DMA_SSRT_SSRT (0x0FU) //!< Bit mask for DMA_SSRT_SSRT.
#define BS_DMA_SSRT_SSRT (4U) //!< Bit field size in bits for DMA_SSRT_SSRT.
//! @brief Format value for bitfield DMA_SSRT_SSRT.
#define BF_DMA_SSRT_SSRT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SSRT_SSRT), uint8_t) & BM_DMA_SSRT_SSRT)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SSRT field to a new value.
#define BW_DMA_SSRT_SSRT(x, v) (HW_DMA_SSRT_WR(x, (HW_DMA_SSRT_RD(x) & ~BM_DMA_SSRT_SSRT) | BF_DMA_SSRT_SSRT(v)))
#endif
//@}
/*!
* @name Register DMA_SSRT, field SAST[6] (WORZ)
*
* Values:
* - 0 - Set only the TCDn_CSR[START] bit specified in the SSRT field
* - 1 - Set all bits in TCDn_CSR[START]
*/
//@{
#define BP_DMA_SSRT_SAST (6U) //!< Bit position for DMA_SSRT_SAST.
#define BM_DMA_SSRT_SAST (0x40U) //!< Bit mask for DMA_SSRT_SAST.
#define BS_DMA_SSRT_SAST (1U) //!< Bit field size in bits for DMA_SSRT_SAST.
//! @brief Format value for bitfield DMA_SSRT_SAST.
#define BF_DMA_SSRT_SAST(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SSRT_SAST), uint8_t) & BM_DMA_SSRT_SAST)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SAST field to a new value.
#define BW_DMA_SSRT_SAST(x, v) (BITBAND_ACCESS8(HW_DMA_SSRT_ADDR(x), BP_DMA_SSRT_SAST) = (v))
#endif
//@}
/*!
* @name Register DMA_SSRT, field NOP[7] (WORZ)
*
* Values:
* - 0 - Normal operation
* - 1 - No operation, ignore the other bits in this register
*/
//@{
#define BP_DMA_SSRT_NOP (7U) //!< Bit position for DMA_SSRT_NOP.
#define BM_DMA_SSRT_NOP (0x80U) //!< Bit mask for DMA_SSRT_NOP.
#define BS_DMA_SSRT_NOP (1U) //!< Bit field size in bits for DMA_SSRT_NOP.
//! @brief Format value for bitfield DMA_SSRT_NOP.
#define BF_DMA_SSRT_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_SSRT_NOP), uint8_t) & BM_DMA_SSRT_NOP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NOP field to a new value.
#define BW_DMA_SSRT_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_SSRT_ADDR(x), BP_DMA_SSRT_NOP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_CERR - Clear Error Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_CERR - Clear Error Register (WO)
*
* Reset value: 0x00U
*
* The CERR provides a simple memory-mapped mechanism to clear a given bit in
* the ERR to disable the error condition flag for a given channel. The given value
* on a register write causes the corresponding bit in the ERR to be cleared.
* Setting the CAEI bit provides a global clear function, forcing the ERR contents
* to be cleared, clearing all channel error indicators. If the NOP bit is set,
* the command is ignored. This allows you to write multiple-byte registers as a
* 32-bit word. Reads of this register return all zeroes.
*/
typedef union _hw_dma_cerr
{
uint8_t U;
struct _hw_dma_cerr_bitfields
{
uint8_t CERR : 4; //!< [3:0] Clear Error Indicator
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t CAEI : 1; //!< [6] Clear All Error Indicators
uint8_t NOP : 1; //!< [7] No Op enable
} B;
} hw_dma_cerr_t;
#endif
/*!
* @name Constants and macros for entire DMA_CERR register
*/
//@{
#define HW_DMA_CERR_ADDR(x) (REGS_DMA_BASE(x) + 0x1EU)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_CERR(x) (*(__O hw_dma_cerr_t *) HW_DMA_CERR_ADDR(x))
#define HW_DMA_CERR_RD(x) (HW_DMA_CERR(x).U)
#define HW_DMA_CERR_WR(x, v) (HW_DMA_CERR(x).U = (v))
#endif
//@}
/*
* Constants & macros for individual DMA_CERR bitfields
*/
/*!
* @name Register DMA_CERR, field CERR[3:0] (WORZ)
*
* Clears the corresponding bit in ERR
*/
//@{
#define BP_DMA_CERR_CERR (0U) //!< Bit position for DMA_CERR_CERR.
#define BM_DMA_CERR_CERR (0x0FU) //!< Bit mask for DMA_CERR_CERR.
#define BS_DMA_CERR_CERR (4U) //!< Bit field size in bits for DMA_CERR_CERR.
//! @brief Format value for bitfield DMA_CERR_CERR.
#define BF_DMA_CERR_CERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERR_CERR), uint8_t) & BM_DMA_CERR_CERR)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CERR field to a new value.
#define BW_DMA_CERR_CERR(x, v) (HW_DMA_CERR_WR(x, (HW_DMA_CERR_RD(x) & ~BM_DMA_CERR_CERR) | BF_DMA_CERR_CERR(v)))
#endif
//@}
/*!
* @name Register DMA_CERR, field CAEI[6] (WORZ)
*
* Values:
* - 0 - Clear only the ERR bit specified in the CERR field
* - 1 - Clear all bits in ERR
*/
//@{
#define BP_DMA_CERR_CAEI (6U) //!< Bit position for DMA_CERR_CAEI.
#define BM_DMA_CERR_CAEI (0x40U) //!< Bit mask for DMA_CERR_CAEI.
#define BS_DMA_CERR_CAEI (1U) //!< Bit field size in bits for DMA_CERR_CAEI.
//! @brief Format value for bitfield DMA_CERR_CAEI.
#define BF_DMA_CERR_CAEI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERR_CAEI), uint8_t) & BM_DMA_CERR_CAEI)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CAEI field to a new value.
#define BW_DMA_CERR_CAEI(x, v) (BITBAND_ACCESS8(HW_DMA_CERR_ADDR(x), BP_DMA_CERR_CAEI) = (v))
#endif
//@}
/*!
* @name Register DMA_CERR, field NOP[7] (WORZ)
*
* Values:
* - 0 - Normal operation
* - 1 - No operation, ignore the other bits in this register
*/
//@{
#define BP_DMA_CERR_NOP (7U) //!< Bit position for DMA_CERR_NOP.
#define BM_DMA_CERR_NOP (0x80U) //!< Bit mask for DMA_CERR_NOP.
#define BS_DMA_CERR_NOP (1U) //!< Bit field size in bits for DMA_CERR_NOP.
//! @brief Format value for bitfield DMA_CERR_NOP.
#define BF_DMA_CERR_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CERR_NOP), uint8_t) & BM_DMA_CERR_NOP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NOP field to a new value.
#define BW_DMA_CERR_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CERR_ADDR(x), BP_DMA_CERR_NOP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_CINT - Clear Interrupt Request Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_CINT - Clear Interrupt Request Register (WO)
*
* Reset value: 0x00U
*
* The CINT provides a simple, memory-mapped mechanism to clear a given bit in
* the INT to disable the interrupt request for a given channel. The given value
* on a register write causes the corresponding bit in the INT to be cleared.
* Setting the CAIR bit provides a global clear function, forcing the entire contents
* of the INT to be cleared, disabling all DMA interrupt requests. If the NOP
* bit is set, the command is ignored. This allows you to write multiple-byte
* registers as a 32-bit word. Reads of this register return all zeroes.
*/
typedef union _hw_dma_cint
{
uint8_t U;
struct _hw_dma_cint_bitfields
{
uint8_t CINT : 4; //!< [3:0] Clear Interrupt Request
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t CAIR : 1; //!< [6] Clear All Interrupt Requests
uint8_t NOP : 1; //!< [7] No Op enable
} B;
} hw_dma_cint_t;
#endif
/*!
* @name Constants and macros for entire DMA_CINT register
*/
//@{
#define HW_DMA_CINT_ADDR(x) (REGS_DMA_BASE(x) + 0x1FU)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_CINT(x) (*(__O hw_dma_cint_t *) HW_DMA_CINT_ADDR(x))
#define HW_DMA_CINT_RD(x) (HW_DMA_CINT(x).U)
#define HW_DMA_CINT_WR(x, v) (HW_DMA_CINT(x).U = (v))
#endif
//@}
/*
* Constants & macros for individual DMA_CINT bitfields
*/
/*!
* @name Register DMA_CINT, field CINT[3:0] (WORZ)
*
* Clears the corresponding bit in INT
*/
//@{
#define BP_DMA_CINT_CINT (0U) //!< Bit position for DMA_CINT_CINT.
#define BM_DMA_CINT_CINT (0x0FU) //!< Bit mask for DMA_CINT_CINT.
#define BS_DMA_CINT_CINT (4U) //!< Bit field size in bits for DMA_CINT_CINT.
//! @brief Format value for bitfield DMA_CINT_CINT.
#define BF_DMA_CINT_CINT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CINT_CINT), uint8_t) & BM_DMA_CINT_CINT)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CINT field to a new value.
#define BW_DMA_CINT_CINT(x, v) (HW_DMA_CINT_WR(x, (HW_DMA_CINT_RD(x) & ~BM_DMA_CINT_CINT) | BF_DMA_CINT_CINT(v)))
#endif
//@}
/*!
* @name Register DMA_CINT, field CAIR[6] (WORZ)
*
* Values:
* - 0 - Clear only the INT bit specified in the CINT field
* - 1 - Clear all bits in INT
*/
//@{
#define BP_DMA_CINT_CAIR (6U) //!< Bit position for DMA_CINT_CAIR.
#define BM_DMA_CINT_CAIR (0x40U) //!< Bit mask for DMA_CINT_CAIR.
#define BS_DMA_CINT_CAIR (1U) //!< Bit field size in bits for DMA_CINT_CAIR.
//! @brief Format value for bitfield DMA_CINT_CAIR.
#define BF_DMA_CINT_CAIR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CINT_CAIR), uint8_t) & BM_DMA_CINT_CAIR)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CAIR field to a new value.
#define BW_DMA_CINT_CAIR(x, v) (BITBAND_ACCESS8(HW_DMA_CINT_ADDR(x), BP_DMA_CINT_CAIR) = (v))
#endif
//@}
/*!
* @name Register DMA_CINT, field NOP[7] (WORZ)
*
* Values:
* - 0 - Normal operation
* - 1 - No operation, ignore the other bits in this register
*/
//@{
#define BP_DMA_CINT_NOP (7U) //!< Bit position for DMA_CINT_NOP.
#define BM_DMA_CINT_NOP (0x80U) //!< Bit mask for DMA_CINT_NOP.
#define BS_DMA_CINT_NOP (1U) //!< Bit field size in bits for DMA_CINT_NOP.
//! @brief Format value for bitfield DMA_CINT_NOP.
#define BF_DMA_CINT_NOP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_CINT_NOP), uint8_t) & BM_DMA_CINT_NOP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NOP field to a new value.
#define BW_DMA_CINT_NOP(x, v) (BITBAND_ACCESS8(HW_DMA_CINT_ADDR(x), BP_DMA_CINT_NOP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_INT - Interrupt Request Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_INT - Interrupt Request Register (RW)
*
* Reset value: 0x00000000U
*
* The INT register provides a bit map for the 16 channels signaling the
* presence of an interrupt request for each channel. Depending on the appropriate bit
* setting in the transfer-control descriptors, the eDMA engine generates an
* interrupt on data transfer completion. The outputs of this register are directly
* routed to the interrupt controller (INTC). During the interrupt-service routine
* associated with any given channel, it is the software's responsibility to
* clear the appropriate bit, negating the interrupt request. Typically, a write to
* the CINT register in the interrupt service routine is used for this purpose.
* The state of any given channel's interrupt request is directly affected by
* writes to this register; it is also affected by writes to the CINT register. On
* writes to INT, a 1 in any bit position clears the corresponding channel's
* interrupt request. A zero in any bit position has no affect on the corresponding
* channel's current interrupt status. The CINT register is provided so the interrupt
* request for a single channel can easily be cleared without the need to
* perform a read-modify-write sequence to the INT register.
*/
typedef union _hw_dma_int
{
uint32_t U;
struct _hw_dma_int_bitfields
{
uint32_t INT0 : 1; //!< [0] Interrupt Request 0
uint32_t INT1 : 1; //!< [1] Interrupt Request 1
uint32_t INT2 : 1; //!< [2] Interrupt Request 2
uint32_t INT3 : 1; //!< [3] Interrupt Request 3
uint32_t INT4 : 1; //!< [4] Interrupt Request 4
uint32_t INT5 : 1; //!< [5] Interrupt Request 5
uint32_t INT6 : 1; //!< [6] Interrupt Request 6
uint32_t INT7 : 1; //!< [7] Interrupt Request 7
uint32_t INT8 : 1; //!< [8] Interrupt Request 8
uint32_t INT9 : 1; //!< [9] Interrupt Request 9
uint32_t INT10 : 1; //!< [10] Interrupt Request 10
uint32_t INT11 : 1; //!< [11] Interrupt Request 11
uint32_t INT12 : 1; //!< [12] Interrupt Request 12
uint32_t INT13 : 1; //!< [13] Interrupt Request 13
uint32_t INT14 : 1; //!< [14] Interrupt Request 14
uint32_t INT15 : 1; //!< [15] Interrupt Request 15
uint32_t RESERVED0 : 16; //!< [31:16]
} B;
} hw_dma_int_t;
#endif
/*!
* @name Constants and macros for entire DMA_INT register
*/
//@{
#define HW_DMA_INT_ADDR(x) (REGS_DMA_BASE(x) + 0x24U)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_INT(x) (*(__IO hw_dma_int_t *) HW_DMA_INT_ADDR(x))
#define HW_DMA_INT_RD(x) (HW_DMA_INT(x).U)
#define HW_DMA_INT_WR(x, v) (HW_DMA_INT(x).U = (v))
#define HW_DMA_INT_SET(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) | (v)))
#define HW_DMA_INT_CLR(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) & ~(v)))
#define HW_DMA_INT_TOG(x, v) (HW_DMA_INT_WR(x, HW_DMA_INT_RD(x) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_INT bitfields
*/
/*!
* @name Register DMA_INT, field INT0[0] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT0 (0U) //!< Bit position for DMA_INT_INT0.
#define BM_DMA_INT_INT0 (0x00000001U) //!< Bit mask for DMA_INT_INT0.
#define BS_DMA_INT_INT0 (1U) //!< Bit field size in bits for DMA_INT_INT0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT0 field.
#define BR_DMA_INT_INT0(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT0))
#endif
//! @brief Format value for bitfield DMA_INT_INT0.
#define BF_DMA_INT_INT0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT0), uint32_t) & BM_DMA_INT_INT0)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT0 field to a new value.
#define BW_DMA_INT_INT0(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT0) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT1[1] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT1 (1U) //!< Bit position for DMA_INT_INT1.
#define BM_DMA_INT_INT1 (0x00000002U) //!< Bit mask for DMA_INT_INT1.
#define BS_DMA_INT_INT1 (1U) //!< Bit field size in bits for DMA_INT_INT1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT1 field.
#define BR_DMA_INT_INT1(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT1))
#endif
//! @brief Format value for bitfield DMA_INT_INT1.
#define BF_DMA_INT_INT1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT1), uint32_t) & BM_DMA_INT_INT1)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT1 field to a new value.
#define BW_DMA_INT_INT1(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT1) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT2[2] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT2 (2U) //!< Bit position for DMA_INT_INT2.
#define BM_DMA_INT_INT2 (0x00000004U) //!< Bit mask for DMA_INT_INT2.
#define BS_DMA_INT_INT2 (1U) //!< Bit field size in bits for DMA_INT_INT2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT2 field.
#define BR_DMA_INT_INT2(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT2))
#endif
//! @brief Format value for bitfield DMA_INT_INT2.
#define BF_DMA_INT_INT2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT2), uint32_t) & BM_DMA_INT_INT2)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT2 field to a new value.
#define BW_DMA_INT_INT2(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT2) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT3[3] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT3 (3U) //!< Bit position for DMA_INT_INT3.
#define BM_DMA_INT_INT3 (0x00000008U) //!< Bit mask for DMA_INT_INT3.
#define BS_DMA_INT_INT3 (1U) //!< Bit field size in bits for DMA_INT_INT3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT3 field.
#define BR_DMA_INT_INT3(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT3))
#endif
//! @brief Format value for bitfield DMA_INT_INT3.
#define BF_DMA_INT_INT3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT3), uint32_t) & BM_DMA_INT_INT3)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT3 field to a new value.
#define BW_DMA_INT_INT3(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT3) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT4[4] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT4 (4U) //!< Bit position for DMA_INT_INT4.
#define BM_DMA_INT_INT4 (0x00000010U) //!< Bit mask for DMA_INT_INT4.
#define BS_DMA_INT_INT4 (1U) //!< Bit field size in bits for DMA_INT_INT4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT4 field.
#define BR_DMA_INT_INT4(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT4))
#endif
//! @brief Format value for bitfield DMA_INT_INT4.
#define BF_DMA_INT_INT4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT4), uint32_t) & BM_DMA_INT_INT4)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT4 field to a new value.
#define BW_DMA_INT_INT4(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT4) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT5[5] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT5 (5U) //!< Bit position for DMA_INT_INT5.
#define BM_DMA_INT_INT5 (0x00000020U) //!< Bit mask for DMA_INT_INT5.
#define BS_DMA_INT_INT5 (1U) //!< Bit field size in bits for DMA_INT_INT5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT5 field.
#define BR_DMA_INT_INT5(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT5))
#endif
//! @brief Format value for bitfield DMA_INT_INT5.
#define BF_DMA_INT_INT5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT5), uint32_t) & BM_DMA_INT_INT5)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT5 field to a new value.
#define BW_DMA_INT_INT5(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT5) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT6[6] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT6 (6U) //!< Bit position for DMA_INT_INT6.
#define BM_DMA_INT_INT6 (0x00000040U) //!< Bit mask for DMA_INT_INT6.
#define BS_DMA_INT_INT6 (1U) //!< Bit field size in bits for DMA_INT_INT6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT6 field.
#define BR_DMA_INT_INT6(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT6))
#endif
//! @brief Format value for bitfield DMA_INT_INT6.
#define BF_DMA_INT_INT6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT6), uint32_t) & BM_DMA_INT_INT6)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT6 field to a new value.
#define BW_DMA_INT_INT6(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT6) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT7[7] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT7 (7U) //!< Bit position for DMA_INT_INT7.
#define BM_DMA_INT_INT7 (0x00000080U) //!< Bit mask for DMA_INT_INT7.
#define BS_DMA_INT_INT7 (1U) //!< Bit field size in bits for DMA_INT_INT7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT7 field.
#define BR_DMA_INT_INT7(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT7))
#endif
//! @brief Format value for bitfield DMA_INT_INT7.
#define BF_DMA_INT_INT7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT7), uint32_t) & BM_DMA_INT_INT7)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT7 field to a new value.
#define BW_DMA_INT_INT7(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT7) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT8[8] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT8 (8U) //!< Bit position for DMA_INT_INT8.
#define BM_DMA_INT_INT8 (0x00000100U) //!< Bit mask for DMA_INT_INT8.
#define BS_DMA_INT_INT8 (1U) //!< Bit field size in bits for DMA_INT_INT8.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT8 field.
#define BR_DMA_INT_INT8(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT8))
#endif
//! @brief Format value for bitfield DMA_INT_INT8.
#define BF_DMA_INT_INT8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT8), uint32_t) & BM_DMA_INT_INT8)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT8 field to a new value.
#define BW_DMA_INT_INT8(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT8) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT9[9] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT9 (9U) //!< Bit position for DMA_INT_INT9.
#define BM_DMA_INT_INT9 (0x00000200U) //!< Bit mask for DMA_INT_INT9.
#define BS_DMA_INT_INT9 (1U) //!< Bit field size in bits for DMA_INT_INT9.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT9 field.
#define BR_DMA_INT_INT9(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT9))
#endif
//! @brief Format value for bitfield DMA_INT_INT9.
#define BF_DMA_INT_INT9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT9), uint32_t) & BM_DMA_INT_INT9)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT9 field to a new value.
#define BW_DMA_INT_INT9(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT9) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT10[10] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT10 (10U) //!< Bit position for DMA_INT_INT10.
#define BM_DMA_INT_INT10 (0x00000400U) //!< Bit mask for DMA_INT_INT10.
#define BS_DMA_INT_INT10 (1U) //!< Bit field size in bits for DMA_INT_INT10.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT10 field.
#define BR_DMA_INT_INT10(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT10))
#endif
//! @brief Format value for bitfield DMA_INT_INT10.
#define BF_DMA_INT_INT10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT10), uint32_t) & BM_DMA_INT_INT10)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT10 field to a new value.
#define BW_DMA_INT_INT10(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT10) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT11[11] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT11 (11U) //!< Bit position for DMA_INT_INT11.
#define BM_DMA_INT_INT11 (0x00000800U) //!< Bit mask for DMA_INT_INT11.
#define BS_DMA_INT_INT11 (1U) //!< Bit field size in bits for DMA_INT_INT11.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT11 field.
#define BR_DMA_INT_INT11(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT11))
#endif
//! @brief Format value for bitfield DMA_INT_INT11.
#define BF_DMA_INT_INT11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT11), uint32_t) & BM_DMA_INT_INT11)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT11 field to a new value.
#define BW_DMA_INT_INT11(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT11) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT12[12] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT12 (12U) //!< Bit position for DMA_INT_INT12.
#define BM_DMA_INT_INT12 (0x00001000U) //!< Bit mask for DMA_INT_INT12.
#define BS_DMA_INT_INT12 (1U) //!< Bit field size in bits for DMA_INT_INT12.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT12 field.
#define BR_DMA_INT_INT12(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT12))
#endif
//! @brief Format value for bitfield DMA_INT_INT12.
#define BF_DMA_INT_INT12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT12), uint32_t) & BM_DMA_INT_INT12)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT12 field to a new value.
#define BW_DMA_INT_INT12(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT12) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT13[13] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT13 (13U) //!< Bit position for DMA_INT_INT13.
#define BM_DMA_INT_INT13 (0x00002000U) //!< Bit mask for DMA_INT_INT13.
#define BS_DMA_INT_INT13 (1U) //!< Bit field size in bits for DMA_INT_INT13.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT13 field.
#define BR_DMA_INT_INT13(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT13))
#endif
//! @brief Format value for bitfield DMA_INT_INT13.
#define BF_DMA_INT_INT13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT13), uint32_t) & BM_DMA_INT_INT13)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT13 field to a new value.
#define BW_DMA_INT_INT13(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT13) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT14[14] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT14 (14U) //!< Bit position for DMA_INT_INT14.
#define BM_DMA_INT_INT14 (0x00004000U) //!< Bit mask for DMA_INT_INT14.
#define BS_DMA_INT_INT14 (1U) //!< Bit field size in bits for DMA_INT_INT14.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT14 field.
#define BR_DMA_INT_INT14(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT14))
#endif
//! @brief Format value for bitfield DMA_INT_INT14.
#define BF_DMA_INT_INT14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT14), uint32_t) & BM_DMA_INT_INT14)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT14 field to a new value.
#define BW_DMA_INT_INT14(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT14) = (v))
#endif
//@}
/*!
* @name Register DMA_INT, field INT15[15] (W1C)
*
* Values:
* - 0 - The interrupt request for corresponding channel is cleared
* - 1 - The interrupt request for corresponding channel is active
*/
//@{
#define BP_DMA_INT_INT15 (15U) //!< Bit position for DMA_INT_INT15.
#define BM_DMA_INT_INT15 (0x00008000U) //!< Bit mask for DMA_INT_INT15.
#define BS_DMA_INT_INT15 (1U) //!< Bit field size in bits for DMA_INT_INT15.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_INT_INT15 field.
#define BR_DMA_INT_INT15(x) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT15))
#endif
//! @brief Format value for bitfield DMA_INT_INT15.
#define BF_DMA_INT_INT15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_INT_INT15), uint32_t) & BM_DMA_INT_INT15)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INT15 field to a new value.
#define BW_DMA_INT_INT15(x, v) (BITBAND_ACCESS32(HW_DMA_INT_ADDR(x), BP_DMA_INT_INT15) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_ERR - Error Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_ERR - Error Register (RW)
*
* Reset value: 0x00000000U
*
* The ERR provides a bit map for the 16 channels, signaling the presence of an
* error for each channel. The eDMA engine signals the occurrence of an error
* condition by setting the appropriate bit in this register. The outputs of this
* register are enabled by the contents of the EEI, and then routed to the
* interrupt controller. During the execution of the interrupt-service routine associated
* with any DMA errors, it is software's responsibility to clear the appropriate
* bit, negating the error-interrupt request. Typically, a write to the CERR in
* the interrupt-service routine is used for this purpose. The normal DMA channel
* completion indicators (setting the transfer control descriptor DONE flag and
* the possible assertion of an interrupt request) are not affected when an error
* is detected. The contents of this register can also be polled because a
* non-zero value indicates the presence of a channel error regardless of the state of
* the EEI. The state of any given channel's error indicators is affected by
* writes to this register; it is also affected by writes to the CERR. On writes to
* the ERR, a one in any bit position clears the corresponding channel's error
* status. A zero in any bit position has no affect on the corresponding channel's
* current error status. The CERR is provided so the error indicator for a single
* channel can easily be cleared.
*/
typedef union _hw_dma_err
{
uint32_t U;
struct _hw_dma_err_bitfields
{
uint32_t ERR0 : 1; //!< [0] Error In Channel 0
uint32_t ERR1 : 1; //!< [1] Error In Channel 1
uint32_t ERR2 : 1; //!< [2] Error In Channel 2
uint32_t ERR3 : 1; //!< [3] Error In Channel 3
uint32_t ERR4 : 1; //!< [4] Error In Channel 4
uint32_t ERR5 : 1; //!< [5] Error In Channel 5
uint32_t ERR6 : 1; //!< [6] Error In Channel 6
uint32_t ERR7 : 1; //!< [7] Error In Channel 7
uint32_t ERR8 : 1; //!< [8] Error In Channel 8
uint32_t ERR9 : 1; //!< [9] Error In Channel 9
uint32_t ERR10 : 1; //!< [10] Error In Channel 10
uint32_t ERR11 : 1; //!< [11] Error In Channel 11
uint32_t ERR12 : 1; //!< [12] Error In Channel 12
uint32_t ERR13 : 1; //!< [13] Error In Channel 13
uint32_t ERR14 : 1; //!< [14] Error In Channel 14
uint32_t ERR15 : 1; //!< [15] Error In Channel 15
uint32_t RESERVED0 : 16; //!< [31:16]
} B;
} hw_dma_err_t;
#endif
/*!
* @name Constants and macros for entire DMA_ERR register
*/
//@{
#define HW_DMA_ERR_ADDR(x) (REGS_DMA_BASE(x) + 0x2CU)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_ERR(x) (*(__IO hw_dma_err_t *) HW_DMA_ERR_ADDR(x))
#define HW_DMA_ERR_RD(x) (HW_DMA_ERR(x).U)
#define HW_DMA_ERR_WR(x, v) (HW_DMA_ERR(x).U = (v))
#define HW_DMA_ERR_SET(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) | (v)))
#define HW_DMA_ERR_CLR(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) & ~(v)))
#define HW_DMA_ERR_TOG(x, v) (HW_DMA_ERR_WR(x, HW_DMA_ERR_RD(x) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_ERR bitfields
*/
/*!
* @name Register DMA_ERR, field ERR0[0] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR0 (0U) //!< Bit position for DMA_ERR_ERR0.
#define BM_DMA_ERR_ERR0 (0x00000001U) //!< Bit mask for DMA_ERR_ERR0.
#define BS_DMA_ERR_ERR0 (1U) //!< Bit field size in bits for DMA_ERR_ERR0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR0 field.
#define BR_DMA_ERR_ERR0(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR0))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR0.
#define BF_DMA_ERR_ERR0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR0), uint32_t) & BM_DMA_ERR_ERR0)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR0 field to a new value.
#define BW_DMA_ERR_ERR0(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR0) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR1[1] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR1 (1U) //!< Bit position for DMA_ERR_ERR1.
#define BM_DMA_ERR_ERR1 (0x00000002U) //!< Bit mask for DMA_ERR_ERR1.
#define BS_DMA_ERR_ERR1 (1U) //!< Bit field size in bits for DMA_ERR_ERR1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR1 field.
#define BR_DMA_ERR_ERR1(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR1))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR1.
#define BF_DMA_ERR_ERR1(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR1), uint32_t) & BM_DMA_ERR_ERR1)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR1 field to a new value.
#define BW_DMA_ERR_ERR1(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR1) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR2[2] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR2 (2U) //!< Bit position for DMA_ERR_ERR2.
#define BM_DMA_ERR_ERR2 (0x00000004U) //!< Bit mask for DMA_ERR_ERR2.
#define BS_DMA_ERR_ERR2 (1U) //!< Bit field size in bits for DMA_ERR_ERR2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR2 field.
#define BR_DMA_ERR_ERR2(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR2))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR2.
#define BF_DMA_ERR_ERR2(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR2), uint32_t) & BM_DMA_ERR_ERR2)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR2 field to a new value.
#define BW_DMA_ERR_ERR2(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR2) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR3[3] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR3 (3U) //!< Bit position for DMA_ERR_ERR3.
#define BM_DMA_ERR_ERR3 (0x00000008U) //!< Bit mask for DMA_ERR_ERR3.
#define BS_DMA_ERR_ERR3 (1U) //!< Bit field size in bits for DMA_ERR_ERR3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR3 field.
#define BR_DMA_ERR_ERR3(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR3))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR3.
#define BF_DMA_ERR_ERR3(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR3), uint32_t) & BM_DMA_ERR_ERR3)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR3 field to a new value.
#define BW_DMA_ERR_ERR3(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR3) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR4[4] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR4 (4U) //!< Bit position for DMA_ERR_ERR4.
#define BM_DMA_ERR_ERR4 (0x00000010U) //!< Bit mask for DMA_ERR_ERR4.
#define BS_DMA_ERR_ERR4 (1U) //!< Bit field size in bits for DMA_ERR_ERR4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR4 field.
#define BR_DMA_ERR_ERR4(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR4))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR4.
#define BF_DMA_ERR_ERR4(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR4), uint32_t) & BM_DMA_ERR_ERR4)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR4 field to a new value.
#define BW_DMA_ERR_ERR4(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR4) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR5[5] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR5 (5U) //!< Bit position for DMA_ERR_ERR5.
#define BM_DMA_ERR_ERR5 (0x00000020U) //!< Bit mask for DMA_ERR_ERR5.
#define BS_DMA_ERR_ERR5 (1U) //!< Bit field size in bits for DMA_ERR_ERR5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR5 field.
#define BR_DMA_ERR_ERR5(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR5))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR5.
#define BF_DMA_ERR_ERR5(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR5), uint32_t) & BM_DMA_ERR_ERR5)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR5 field to a new value.
#define BW_DMA_ERR_ERR5(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR5) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR6[6] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR6 (6U) //!< Bit position for DMA_ERR_ERR6.
#define BM_DMA_ERR_ERR6 (0x00000040U) //!< Bit mask for DMA_ERR_ERR6.
#define BS_DMA_ERR_ERR6 (1U) //!< Bit field size in bits for DMA_ERR_ERR6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR6 field.
#define BR_DMA_ERR_ERR6(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR6))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR6.
#define BF_DMA_ERR_ERR6(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR6), uint32_t) & BM_DMA_ERR_ERR6)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR6 field to a new value.
#define BW_DMA_ERR_ERR6(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR6) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR7[7] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR7 (7U) //!< Bit position for DMA_ERR_ERR7.
#define BM_DMA_ERR_ERR7 (0x00000080U) //!< Bit mask for DMA_ERR_ERR7.
#define BS_DMA_ERR_ERR7 (1U) //!< Bit field size in bits for DMA_ERR_ERR7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR7 field.
#define BR_DMA_ERR_ERR7(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR7))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR7.
#define BF_DMA_ERR_ERR7(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR7), uint32_t) & BM_DMA_ERR_ERR7)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR7 field to a new value.
#define BW_DMA_ERR_ERR7(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR7) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR8[8] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR8 (8U) //!< Bit position for DMA_ERR_ERR8.
#define BM_DMA_ERR_ERR8 (0x00000100U) //!< Bit mask for DMA_ERR_ERR8.
#define BS_DMA_ERR_ERR8 (1U) //!< Bit field size in bits for DMA_ERR_ERR8.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR8 field.
#define BR_DMA_ERR_ERR8(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR8))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR8.
#define BF_DMA_ERR_ERR8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR8), uint32_t) & BM_DMA_ERR_ERR8)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR8 field to a new value.
#define BW_DMA_ERR_ERR8(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR8) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR9[9] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR9 (9U) //!< Bit position for DMA_ERR_ERR9.
#define BM_DMA_ERR_ERR9 (0x00000200U) //!< Bit mask for DMA_ERR_ERR9.
#define BS_DMA_ERR_ERR9 (1U) //!< Bit field size in bits for DMA_ERR_ERR9.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR9 field.
#define BR_DMA_ERR_ERR9(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR9))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR9.
#define BF_DMA_ERR_ERR9(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR9), uint32_t) & BM_DMA_ERR_ERR9)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR9 field to a new value.
#define BW_DMA_ERR_ERR9(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR9) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR10[10] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR10 (10U) //!< Bit position for DMA_ERR_ERR10.
#define BM_DMA_ERR_ERR10 (0x00000400U) //!< Bit mask for DMA_ERR_ERR10.
#define BS_DMA_ERR_ERR10 (1U) //!< Bit field size in bits for DMA_ERR_ERR10.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR10 field.
#define BR_DMA_ERR_ERR10(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR10))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR10.
#define BF_DMA_ERR_ERR10(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR10), uint32_t) & BM_DMA_ERR_ERR10)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR10 field to a new value.
#define BW_DMA_ERR_ERR10(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR10) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR11[11] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR11 (11U) //!< Bit position for DMA_ERR_ERR11.
#define BM_DMA_ERR_ERR11 (0x00000800U) //!< Bit mask for DMA_ERR_ERR11.
#define BS_DMA_ERR_ERR11 (1U) //!< Bit field size in bits for DMA_ERR_ERR11.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR11 field.
#define BR_DMA_ERR_ERR11(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR11))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR11.
#define BF_DMA_ERR_ERR11(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR11), uint32_t) & BM_DMA_ERR_ERR11)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR11 field to a new value.
#define BW_DMA_ERR_ERR11(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR11) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR12[12] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR12 (12U) //!< Bit position for DMA_ERR_ERR12.
#define BM_DMA_ERR_ERR12 (0x00001000U) //!< Bit mask for DMA_ERR_ERR12.
#define BS_DMA_ERR_ERR12 (1U) //!< Bit field size in bits for DMA_ERR_ERR12.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR12 field.
#define BR_DMA_ERR_ERR12(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR12))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR12.
#define BF_DMA_ERR_ERR12(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR12), uint32_t) & BM_DMA_ERR_ERR12)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR12 field to a new value.
#define BW_DMA_ERR_ERR12(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR12) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR13[13] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR13 (13U) //!< Bit position for DMA_ERR_ERR13.
#define BM_DMA_ERR_ERR13 (0x00002000U) //!< Bit mask for DMA_ERR_ERR13.
#define BS_DMA_ERR_ERR13 (1U) //!< Bit field size in bits for DMA_ERR_ERR13.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR13 field.
#define BR_DMA_ERR_ERR13(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR13))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR13.
#define BF_DMA_ERR_ERR13(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR13), uint32_t) & BM_DMA_ERR_ERR13)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR13 field to a new value.
#define BW_DMA_ERR_ERR13(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR13) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR14[14] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR14 (14U) //!< Bit position for DMA_ERR_ERR14.
#define BM_DMA_ERR_ERR14 (0x00004000U) //!< Bit mask for DMA_ERR_ERR14.
#define BS_DMA_ERR_ERR14 (1U) //!< Bit field size in bits for DMA_ERR_ERR14.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR14 field.
#define BR_DMA_ERR_ERR14(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR14))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR14.
#define BF_DMA_ERR_ERR14(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR14), uint32_t) & BM_DMA_ERR_ERR14)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR14 field to a new value.
#define BW_DMA_ERR_ERR14(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR14) = (v))
#endif
//@}
/*!
* @name Register DMA_ERR, field ERR15[15] (W1C)
*
* Values:
* - 0 - An error in the corresponding channel has not occurred
* - 1 - An error in the corresponding channel has occurred
*/
//@{
#define BP_DMA_ERR_ERR15 (15U) //!< Bit position for DMA_ERR_ERR15.
#define BM_DMA_ERR_ERR15 (0x00008000U) //!< Bit mask for DMA_ERR_ERR15.
#define BS_DMA_ERR_ERR15 (1U) //!< Bit field size in bits for DMA_ERR_ERR15.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_ERR_ERR15 field.
#define BR_DMA_ERR_ERR15(x) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR15))
#endif
//! @brief Format value for bitfield DMA_ERR_ERR15.
#define BF_DMA_ERR_ERR15(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_ERR_ERR15), uint32_t) & BM_DMA_ERR_ERR15)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ERR15 field to a new value.
#define BW_DMA_ERR_ERR15(x, v) (BITBAND_ACCESS32(HW_DMA_ERR_ADDR(x), BP_DMA_ERR_ERR15) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_HRS - Hardware Request Status Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_HRS - Hardware Request Status Register (RO)
*
* Reset value: 0x00000000U
*
* The HRS register provides a bit map for the DMA channels, signaling the
* presence of a hardware request for each channel. The hardware request status bits
* reflect the current state of the register and qualified (via the ERQ fields)
* DMA request signals as seen by the DMA's arbitration logic. This view into the
* hardware request signals may be used for debug purposes. These bits reflect the
* state of the request as seen by the arbitration logic. Therefore, this status
* is affected by the ERQ bits.
*/
typedef union _hw_dma_hrs
{
uint32_t U;
struct _hw_dma_hrs_bitfields
{
uint32_t HRS0 : 1; //!< [0] Hardware Request Status Channel 0
uint32_t HRS1 : 1; //!< [1] Hardware Request Status Channel 1
uint32_t HRS2 : 1; //!< [2] Hardware Request Status Channel 2
uint32_t HRS3 : 1; //!< [3] Hardware Request Status Channel 3
uint32_t HRS4 : 1; //!< [4] Hardware Request Status Channel 4
uint32_t HRS5 : 1; //!< [5] Hardware Request Status Channel 5
uint32_t HRS6 : 1; //!< [6] Hardware Request Status Channel 6
uint32_t HRS7 : 1; //!< [7] Hardware Request Status Channel 7
uint32_t HRS8 : 1; //!< [8] Hardware Request Status Channel 8
uint32_t HRS9 : 1; //!< [9] Hardware Request Status Channel 9
uint32_t HRS10 : 1; //!< [10] Hardware Request Status Channel 10
uint32_t HRS11 : 1; //!< [11] Hardware Request Status Channel 11
uint32_t HRS12 : 1; //!< [12] Hardware Request Status Channel 12
uint32_t HRS13 : 1; //!< [13] Hardware Request Status Channel 13
uint32_t HRS14 : 1; //!< [14] Hardware Request Status Channel 14
uint32_t HRS15 : 1; //!< [15] Hardware Request Status Channel 15
uint32_t RESERVED0 : 16; //!< [31:16] Reserved
} B;
} hw_dma_hrs_t;
#endif
/*!
* @name Constants and macros for entire DMA_HRS register
*/
//@{
#define HW_DMA_HRS_ADDR(x) (REGS_DMA_BASE(x) + 0x34U)
#ifndef __LANGUAGE_ASM__
#define HW_DMA_HRS(x) (*(__I hw_dma_hrs_t *) HW_DMA_HRS_ADDR(x))
#define HW_DMA_HRS_RD(x) (HW_DMA_HRS(x).U)
#endif
//@}
/*
* Constants & macros for individual DMA_HRS bitfields
*/
/*!
* @name Register DMA_HRS, field HRS0[0] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 0 is not present
* - 1 - A hardware service request for channel 0 is present
*/
//@{
#define BP_DMA_HRS_HRS0 (0U) //!< Bit position for DMA_HRS_HRS0.
#define BM_DMA_HRS_HRS0 (0x00000001U) //!< Bit mask for DMA_HRS_HRS0.
#define BS_DMA_HRS_HRS0 (1U) //!< Bit field size in bits for DMA_HRS_HRS0.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS0 field.
#define BR_DMA_HRS_HRS0(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS0))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS1[1] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 1 is not present
* - 1 - A hardware service request for channel 1 is present
*/
//@{
#define BP_DMA_HRS_HRS1 (1U) //!< Bit position for DMA_HRS_HRS1.
#define BM_DMA_HRS_HRS1 (0x00000002U) //!< Bit mask for DMA_HRS_HRS1.
#define BS_DMA_HRS_HRS1 (1U) //!< Bit field size in bits for DMA_HRS_HRS1.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS1 field.
#define BR_DMA_HRS_HRS1(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS1))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS2[2] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 2 is not present
* - 1 - A hardware service request for channel 2 is present
*/
//@{
#define BP_DMA_HRS_HRS2 (2U) //!< Bit position for DMA_HRS_HRS2.
#define BM_DMA_HRS_HRS2 (0x00000004U) //!< Bit mask for DMA_HRS_HRS2.
#define BS_DMA_HRS_HRS2 (1U) //!< Bit field size in bits for DMA_HRS_HRS2.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS2 field.
#define BR_DMA_HRS_HRS2(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS2))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS3[3] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 3 is not present
* - 1 - A hardware service request for channel 3 is present
*/
//@{
#define BP_DMA_HRS_HRS3 (3U) //!< Bit position for DMA_HRS_HRS3.
#define BM_DMA_HRS_HRS3 (0x00000008U) //!< Bit mask for DMA_HRS_HRS3.
#define BS_DMA_HRS_HRS3 (1U) //!< Bit field size in bits for DMA_HRS_HRS3.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS3 field.
#define BR_DMA_HRS_HRS3(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS3))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS4[4] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 4 is not present
* - 1 - A hardware service request for channel 4 is present
*/
//@{
#define BP_DMA_HRS_HRS4 (4U) //!< Bit position for DMA_HRS_HRS4.
#define BM_DMA_HRS_HRS4 (0x00000010U) //!< Bit mask for DMA_HRS_HRS4.
#define BS_DMA_HRS_HRS4 (1U) //!< Bit field size in bits for DMA_HRS_HRS4.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS4 field.
#define BR_DMA_HRS_HRS4(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS4))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS5[5] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 5 is not present
* - 1 - A hardware service request for channel 5 is present
*/
//@{
#define BP_DMA_HRS_HRS5 (5U) //!< Bit position for DMA_HRS_HRS5.
#define BM_DMA_HRS_HRS5 (0x00000020U) //!< Bit mask for DMA_HRS_HRS5.
#define BS_DMA_HRS_HRS5 (1U) //!< Bit field size in bits for DMA_HRS_HRS5.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS5 field.
#define BR_DMA_HRS_HRS5(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS5))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS6[6] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 6 is not present
* - 1 - A hardware service request for channel 6 is present
*/
//@{
#define BP_DMA_HRS_HRS6 (6U) //!< Bit position for DMA_HRS_HRS6.
#define BM_DMA_HRS_HRS6 (0x00000040U) //!< Bit mask for DMA_HRS_HRS6.
#define BS_DMA_HRS_HRS6 (1U) //!< Bit field size in bits for DMA_HRS_HRS6.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS6 field.
#define BR_DMA_HRS_HRS6(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS6))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS7[7] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 7 is not present
* - 1 - A hardware service request for channel 7 is present
*/
//@{
#define BP_DMA_HRS_HRS7 (7U) //!< Bit position for DMA_HRS_HRS7.
#define BM_DMA_HRS_HRS7 (0x00000080U) //!< Bit mask for DMA_HRS_HRS7.
#define BS_DMA_HRS_HRS7 (1U) //!< Bit field size in bits for DMA_HRS_HRS7.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS7 field.
#define BR_DMA_HRS_HRS7(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS7))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS8[8] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 8 is not present
* - 1 - A hardware service request for channel 8 is present
*/
//@{
#define BP_DMA_HRS_HRS8 (8U) //!< Bit position for DMA_HRS_HRS8.
#define BM_DMA_HRS_HRS8 (0x00000100U) //!< Bit mask for DMA_HRS_HRS8.
#define BS_DMA_HRS_HRS8 (1U) //!< Bit field size in bits for DMA_HRS_HRS8.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS8 field.
#define BR_DMA_HRS_HRS8(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS8))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS9[9] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 9 is not present
* - 1 - A hardware service request for channel 9 is present
*/
//@{
#define BP_DMA_HRS_HRS9 (9U) //!< Bit position for DMA_HRS_HRS9.
#define BM_DMA_HRS_HRS9 (0x00000200U) //!< Bit mask for DMA_HRS_HRS9.
#define BS_DMA_HRS_HRS9 (1U) //!< Bit field size in bits for DMA_HRS_HRS9.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS9 field.
#define BR_DMA_HRS_HRS9(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS9))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS10[10] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 10 is not present
* - 1 - A hardware service request for channel 10 is present
*/
//@{
#define BP_DMA_HRS_HRS10 (10U) //!< Bit position for DMA_HRS_HRS10.
#define BM_DMA_HRS_HRS10 (0x00000400U) //!< Bit mask for DMA_HRS_HRS10.
#define BS_DMA_HRS_HRS10 (1U) //!< Bit field size in bits for DMA_HRS_HRS10.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS10 field.
#define BR_DMA_HRS_HRS10(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS10))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS11[11] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 11 is not present
* - 1 - A hardware service request for channel 11 is present
*/
//@{
#define BP_DMA_HRS_HRS11 (11U) //!< Bit position for DMA_HRS_HRS11.
#define BM_DMA_HRS_HRS11 (0x00000800U) //!< Bit mask for DMA_HRS_HRS11.
#define BS_DMA_HRS_HRS11 (1U) //!< Bit field size in bits for DMA_HRS_HRS11.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS11 field.
#define BR_DMA_HRS_HRS11(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS11))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS12[12] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 12 is not present
* - 1 - A hardware service request for channel 12 is present
*/
//@{
#define BP_DMA_HRS_HRS12 (12U) //!< Bit position for DMA_HRS_HRS12.
#define BM_DMA_HRS_HRS12 (0x00001000U) //!< Bit mask for DMA_HRS_HRS12.
#define BS_DMA_HRS_HRS12 (1U) //!< Bit field size in bits for DMA_HRS_HRS12.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS12 field.
#define BR_DMA_HRS_HRS12(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS12))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS13[13] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 13 is not present
* - 1 - A hardware service request for channel 13 is present
*/
//@{
#define BP_DMA_HRS_HRS13 (13U) //!< Bit position for DMA_HRS_HRS13.
#define BM_DMA_HRS_HRS13 (0x00002000U) //!< Bit mask for DMA_HRS_HRS13.
#define BS_DMA_HRS_HRS13 (1U) //!< Bit field size in bits for DMA_HRS_HRS13.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS13 field.
#define BR_DMA_HRS_HRS13(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS13))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS14[14] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 14 is not present
* - 1 - A hardware service request for channel 14 is present
*/
//@{
#define BP_DMA_HRS_HRS14 (14U) //!< Bit position for DMA_HRS_HRS14.
#define BM_DMA_HRS_HRS14 (0x00004000U) //!< Bit mask for DMA_HRS_HRS14.
#define BS_DMA_HRS_HRS14 (1U) //!< Bit field size in bits for DMA_HRS_HRS14.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS14 field.
#define BR_DMA_HRS_HRS14(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS14))
#endif
//@}
/*!
* @name Register DMA_HRS, field HRS15[15] (RO)
*
* The HRS bit for its respective channel remains asserted for the period when a
* Hardware Request is Present on the Channel. After the Request is completed
* and Channel is free , the HRS bit is automatically cleared by hardware.
*
* Values:
* - 0 - A hardware service request for channel 15 is not present
* - 1 - A hardware service request for channel 15 is present
*/
//@{
#define BP_DMA_HRS_HRS15 (15U) //!< Bit position for DMA_HRS_HRS15.
#define BM_DMA_HRS_HRS15 (0x00008000U) //!< Bit mask for DMA_HRS_HRS15.
#define BS_DMA_HRS_HRS15 (1U) //!< Bit field size in bits for DMA_HRS_HRS15.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_HRS_HRS15 field.
#define BR_DMA_HRS_HRS15(x) (BITBAND_ACCESS32(HW_DMA_HRS_ADDR(x), BP_DMA_HRS_HRS15))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_DCHPRIn - Channel n Priority Register
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_DCHPRIn - Channel n Priority Register (RW)
*
* Reset value: 0x00U
*
* When fixed-priority channel arbitration is enabled (CR[ERCA] = 0), the
* contents of these registers define the unique priorities associated with each
* channel . The channel priorities are evaluated by numeric value; for example, 0 is
* the lowest priority, 1 is the next priority, then 2, 3, etc. Software must
* program the channel priorities with unique values; otherwise, a configuration
* error is reported. The range of the priority value is limited to the values of 0
* through 15.
*/
typedef union _hw_dma_dchprin
{
uint8_t U;
struct _hw_dma_dchprin_bitfields
{
uint8_t CHPRI : 4; //!< [3:0] Channel n Arbitration Priority
uint8_t RESERVED0 : 2; //!< [5:4]
uint8_t DPA : 1; //!< [6] Disable Preempt Ability
uint8_t ECP : 1; //!< [7] Enable Channel Preemption
} B;
} hw_dma_dchprin_t;
#endif
/*!
* @name Constants and macros for entire DMA_DCHPRIn register
*/
//@{
#define HW_DMA_DCHPRIn_COUNT (16U)
#define HW_DMA_DCHPRIn_ADDR(x, n) (REGS_DMA_BASE(x) + 0x100U + (0x1U * n))
/* DMA channel index to DMA channel priority register array index conversion macro */
#define HW_DMA_DCHPRIn_CHANNEL(n) (((n) & ~0x03U) | (3 - ((n) & 0x03U)))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_DCHPRIn(x, n) (*(__IO hw_dma_dchprin_t *) HW_DMA_DCHPRIn_ADDR(x, n))
#define HW_DMA_DCHPRIn_RD(x, n) (HW_DMA_DCHPRIn(x, n).U)
#define HW_DMA_DCHPRIn_WR(x, n, v) (HW_DMA_DCHPRIn(x, n).U = (v))
#define HW_DMA_DCHPRIn_SET(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) | (v)))
#define HW_DMA_DCHPRIn_CLR(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) & ~(v)))
#define HW_DMA_DCHPRIn_TOG(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, HW_DMA_DCHPRIn_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_DCHPRIn bitfields
*/
/*!
* @name Register DMA_DCHPRIn, field CHPRI[3:0] (RW)
*
* Channel priority when fixed-priority arbitration is enabled Reset value for
* the channel priority fields, CHPRI, is equal to the corresponding channel
* number for each priority register, i.e., DCHPRI15[CHPRI] equals 0b1111.
*/
//@{
#define BP_DMA_DCHPRIn_CHPRI (0U) //!< Bit position for DMA_DCHPRIn_CHPRI.
#define BM_DMA_DCHPRIn_CHPRI (0x0FU) //!< Bit mask for DMA_DCHPRIn_CHPRI.
#define BS_DMA_DCHPRIn_CHPRI (4U) //!< Bit field size in bits for DMA_DCHPRIn_CHPRI.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_DCHPRIn_CHPRI field.
#define BR_DMA_DCHPRIn_CHPRI(x, n) (HW_DMA_DCHPRIn(x, n).B.CHPRI)
#endif
//! @brief Format value for bitfield DMA_DCHPRIn_CHPRI.
#define BF_DMA_DCHPRIn_CHPRI(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_DCHPRIn_CHPRI), uint8_t) & BM_DMA_DCHPRIn_CHPRI)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CHPRI field to a new value.
#define BW_DMA_DCHPRIn_CHPRI(x, n, v) (HW_DMA_DCHPRIn_WR(x, n, (HW_DMA_DCHPRIn_RD(x, n) & ~BM_DMA_DCHPRIn_CHPRI) | BF_DMA_DCHPRIn_CHPRI(v)))
#endif
//@}
/*!
* @name Register DMA_DCHPRIn, field DPA[6] (RW)
*
* Values:
* - 0 - Channel n can suspend a lower priority channel
* - 1 - Channel n cannot suspend any channel, regardless of channel priority
*/
//@{
#define BP_DMA_DCHPRIn_DPA (6U) //!< Bit position for DMA_DCHPRIn_DPA.
#define BM_DMA_DCHPRIn_DPA (0x40U) //!< Bit mask for DMA_DCHPRIn_DPA.
#define BS_DMA_DCHPRIn_DPA (1U) //!< Bit field size in bits for DMA_DCHPRIn_DPA.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_DCHPRIn_DPA field.
#define BR_DMA_DCHPRIn_DPA(x, n) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_DPA))
#endif
//! @brief Format value for bitfield DMA_DCHPRIn_DPA.
#define BF_DMA_DCHPRIn_DPA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_DCHPRIn_DPA), uint8_t) & BM_DMA_DCHPRIn_DPA)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DPA field to a new value.
#define BW_DMA_DCHPRIn_DPA(x, n, v) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_DPA) = (v))
#endif
//@}
/*!
* @name Register DMA_DCHPRIn, field ECP[7] (RW)
*
* Values:
* - 0 - Channel n cannot be suspended by a higher priority channel's service
* request
* - 1 - Channel n can be temporarily suspended by the service request of a
* higher priority channel
*/
//@{
#define BP_DMA_DCHPRIn_ECP (7U) //!< Bit position for DMA_DCHPRIn_ECP.
#define BM_DMA_DCHPRIn_ECP (0x80U) //!< Bit mask for DMA_DCHPRIn_ECP.
#define BS_DMA_DCHPRIn_ECP (1U) //!< Bit field size in bits for DMA_DCHPRIn_ECP.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_DCHPRIn_ECP field.
#define BR_DMA_DCHPRIn_ECP(x, n) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_ECP))
#endif
//! @brief Format value for bitfield DMA_DCHPRIn_ECP.
#define BF_DMA_DCHPRIn_ECP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_DMA_DCHPRIn_ECP), uint8_t) & BM_DMA_DCHPRIn_ECP)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ECP field to a new value.
#define BW_DMA_DCHPRIn_ECP(x, n, v) (BITBAND_ACCESS8(HW_DMA_DCHPRIn_ADDR(x, n), BP_DMA_DCHPRIn_ECP) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_SADDR - TCD Source Address
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_SADDR - TCD Source Address (RW)
*
* Reset value: 0x00000000U
*/
typedef union _hw_dma_tcdn_saddr
{
uint32_t U;
struct _hw_dma_tcdn_saddr_bitfields
{
uint32_t SADDR : 32; //!< [31:0] Source Address
} B;
} hw_dma_tcdn_saddr_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_SADDR register
*/
//@{
#define HW_DMA_TCDn_SADDR_COUNT (16U)
#define HW_DMA_TCDn_SADDR_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1000U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_SADDR(x, n) (*(__IO hw_dma_tcdn_saddr_t *) HW_DMA_TCDn_SADDR_ADDR(x, n))
#define HW_DMA_TCDn_SADDR_RD(x, n) (HW_DMA_TCDn_SADDR(x, n).U)
#define HW_DMA_TCDn_SADDR_WR(x, n, v) (HW_DMA_TCDn_SADDR(x, n).U = (v))
#define HW_DMA_TCDn_SADDR_SET(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) | (v)))
#define HW_DMA_TCDn_SADDR_CLR(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_SADDR_TOG(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, HW_DMA_TCDn_SADDR_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_SADDR bitfields
*/
/*!
* @name Register DMA_TCDn_SADDR, field SADDR[31:0] (RW)
*
* Memory address pointing to the source data.
*/
//@{
#define BP_DMA_TCDn_SADDR_SADDR (0U) //!< Bit position for DMA_TCDn_SADDR_SADDR.
#define BM_DMA_TCDn_SADDR_SADDR (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_SADDR_SADDR.
#define BS_DMA_TCDn_SADDR_SADDR (32U) //!< Bit field size in bits for DMA_TCDn_SADDR_SADDR.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_SADDR_SADDR field.
#define BR_DMA_TCDn_SADDR_SADDR(x, n) (HW_DMA_TCDn_SADDR(x, n).U)
#endif
//! @brief Format value for bitfield DMA_TCDn_SADDR_SADDR.
#define BF_DMA_TCDn_SADDR_SADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_SADDR_SADDR), uint32_t) & BM_DMA_TCDn_SADDR_SADDR)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SADDR field to a new value.
#define BW_DMA_TCDn_SADDR_SADDR(x, n, v) (HW_DMA_TCDn_SADDR_WR(x, n, v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_SOFF - TCD Signed Source Address Offset (RW)
*
* Reset value: 0x0000U
*/
typedef union _hw_dma_tcdn_soff
{
uint16_t U;
struct _hw_dma_tcdn_soff_bitfields
{
uint16_t SOFF : 16; //!< [15:0] Source address signed offset
} B;
} hw_dma_tcdn_soff_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_SOFF register
*/
//@{
#define HW_DMA_TCDn_SOFF_COUNT (16U)
#define HW_DMA_TCDn_SOFF_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1004U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_SOFF(x, n) (*(__IO hw_dma_tcdn_soff_t *) HW_DMA_TCDn_SOFF_ADDR(x, n))
#define HW_DMA_TCDn_SOFF_RD(x, n) (HW_DMA_TCDn_SOFF(x, n).U)
#define HW_DMA_TCDn_SOFF_WR(x, n, v) (HW_DMA_TCDn_SOFF(x, n).U = (v))
#define HW_DMA_TCDn_SOFF_SET(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) | (v)))
#define HW_DMA_TCDn_SOFF_CLR(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_SOFF_TOG(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, HW_DMA_TCDn_SOFF_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_SOFF bitfields
*/
/*!
* @name Register DMA_TCDn_SOFF, field SOFF[15:0] (RW)
*
* Sign-extended offset applied to the current source address to form the
* next-state value as each source read is completed.
*/
//@{
#define BP_DMA_TCDn_SOFF_SOFF (0U) //!< Bit position for DMA_TCDn_SOFF_SOFF.
#define BM_DMA_TCDn_SOFF_SOFF (0xFFFFU) //!< Bit mask for DMA_TCDn_SOFF_SOFF.
#define BS_DMA_TCDn_SOFF_SOFF (16U) //!< Bit field size in bits for DMA_TCDn_SOFF_SOFF.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_SOFF_SOFF field.
#define BR_DMA_TCDn_SOFF_SOFF(x, n) (HW_DMA_TCDn_SOFF(x, n).U)
#endif
//! @brief Format value for bitfield DMA_TCDn_SOFF_SOFF.
#define BF_DMA_TCDn_SOFF_SOFF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_SOFF_SOFF), uint16_t) & BM_DMA_TCDn_SOFF_SOFF)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SOFF field to a new value.
#define BW_DMA_TCDn_SOFF_SOFF(x, n, v) (HW_DMA_TCDn_SOFF_WR(x, n, v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_ATTR - TCD Transfer Attributes
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_ATTR - TCD Transfer Attributes (RW)
*
* Reset value: 0x0000U
*/
typedef union _hw_dma_tcdn_attr
{
uint16_t U;
struct _hw_dma_tcdn_attr_bitfields
{
uint16_t DSIZE : 3; //!< [2:0] Destination Data Transfer Size
uint16_t DMOD : 5; //!< [7:3] Destination Address Modulo
uint16_t SSIZE : 3; //!< [10:8] Source data transfer size
uint16_t SMOD : 5; //!< [15:11] Source Address Modulo.
} B;
} hw_dma_tcdn_attr_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_ATTR register
*/
//@{
#define HW_DMA_TCDn_ATTR_COUNT (16U)
#define HW_DMA_TCDn_ATTR_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1006U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_ATTR(x, n) (*(__IO hw_dma_tcdn_attr_t *) HW_DMA_TCDn_ATTR_ADDR(x, n))
#define HW_DMA_TCDn_ATTR_RD(x, n) (HW_DMA_TCDn_ATTR(x, n).U)
#define HW_DMA_TCDn_ATTR_WR(x, n, v) (HW_DMA_TCDn_ATTR(x, n).U = (v))
#define HW_DMA_TCDn_ATTR_SET(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) | (v)))
#define HW_DMA_TCDn_ATTR_CLR(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_ATTR_TOG(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, HW_DMA_TCDn_ATTR_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_ATTR bitfields
*/
/*!
* @name Register DMA_TCDn_ATTR, field DSIZE[2:0] (RW)
*
* See the SSIZE definition
*/
//@{
#define BP_DMA_TCDn_ATTR_DSIZE (0U) //!< Bit position for DMA_TCDn_ATTR_DSIZE.
#define BM_DMA_TCDn_ATTR_DSIZE (0x0007U) //!< Bit mask for DMA_TCDn_ATTR_DSIZE.
#define BS_DMA_TCDn_ATTR_DSIZE (3U) //!< Bit field size in bits for DMA_TCDn_ATTR_DSIZE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_ATTR_DSIZE field.
#define BR_DMA_TCDn_ATTR_DSIZE(x, n) (HW_DMA_TCDn_ATTR(x, n).B.DSIZE)
#endif
//! @brief Format value for bitfield DMA_TCDn_ATTR_DSIZE.
#define BF_DMA_TCDn_ATTR_DSIZE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_ATTR_DSIZE), uint16_t) & BM_DMA_TCDn_ATTR_DSIZE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DSIZE field to a new value.
#define BW_DMA_TCDn_ATTR_DSIZE(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_DSIZE) | BF_DMA_TCDn_ATTR_DSIZE(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_ATTR, field DMOD[7:3] (RW)
*
* See the SMOD definition
*/
//@{
#define BP_DMA_TCDn_ATTR_DMOD (3U) //!< Bit position for DMA_TCDn_ATTR_DMOD.
#define BM_DMA_TCDn_ATTR_DMOD (0x00F8U) //!< Bit mask for DMA_TCDn_ATTR_DMOD.
#define BS_DMA_TCDn_ATTR_DMOD (5U) //!< Bit field size in bits for DMA_TCDn_ATTR_DMOD.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_ATTR_DMOD field.
#define BR_DMA_TCDn_ATTR_DMOD(x, n) (HW_DMA_TCDn_ATTR(x, n).B.DMOD)
#endif
//! @brief Format value for bitfield DMA_TCDn_ATTR_DMOD.
#define BF_DMA_TCDn_ATTR_DMOD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_ATTR_DMOD), uint16_t) & BM_DMA_TCDn_ATTR_DMOD)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DMOD field to a new value.
#define BW_DMA_TCDn_ATTR_DMOD(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_DMOD) | BF_DMA_TCDn_ATTR_DMOD(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_ATTR, field SSIZE[10:8] (RW)
*
* The attempted use of a Reserved encoding causes a configuration error.
*
* Values:
* - 000 - 8-bit
* - 001 - 16-bit
* - 010 - 32-bit
* - 011 - Reserved
* - 100 - 16-byte
* - 101 - 32-byte
* - 110 - Reserved
* - 111 - Reserved
*/
//@{
#define BP_DMA_TCDn_ATTR_SSIZE (8U) //!< Bit position for DMA_TCDn_ATTR_SSIZE.
#define BM_DMA_TCDn_ATTR_SSIZE (0x0700U) //!< Bit mask for DMA_TCDn_ATTR_SSIZE.
#define BS_DMA_TCDn_ATTR_SSIZE (3U) //!< Bit field size in bits for DMA_TCDn_ATTR_SSIZE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_ATTR_SSIZE field.
#define BR_DMA_TCDn_ATTR_SSIZE(x, n) (HW_DMA_TCDn_ATTR(x, n).B.SSIZE)
#endif
//! @brief Format value for bitfield DMA_TCDn_ATTR_SSIZE.
#define BF_DMA_TCDn_ATTR_SSIZE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_ATTR_SSIZE), uint16_t) & BM_DMA_TCDn_ATTR_SSIZE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SSIZE field to a new value.
#define BW_DMA_TCDn_ATTR_SSIZE(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_SSIZE) | BF_DMA_TCDn_ATTR_SSIZE(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_ATTR, field SMOD[15:11] (RW)
*
* Values:
* - 0 - Source address modulo feature is disabled
*/
//@{
#define BP_DMA_TCDn_ATTR_SMOD (11U) //!< Bit position for DMA_TCDn_ATTR_SMOD.
#define BM_DMA_TCDn_ATTR_SMOD (0xF800U) //!< Bit mask for DMA_TCDn_ATTR_SMOD.
#define BS_DMA_TCDn_ATTR_SMOD (5U) //!< Bit field size in bits for DMA_TCDn_ATTR_SMOD.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_ATTR_SMOD field.
#define BR_DMA_TCDn_ATTR_SMOD(x, n) (HW_DMA_TCDn_ATTR(x, n).B.SMOD)
#endif
//! @brief Format value for bitfield DMA_TCDn_ATTR_SMOD.
#define BF_DMA_TCDn_ATTR_SMOD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_ATTR_SMOD), uint16_t) & BM_DMA_TCDn_ATTR_SMOD)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SMOD field to a new value.
#define BW_DMA_TCDn_ATTR_SMOD(x, n, v) (HW_DMA_TCDn_ATTR_WR(x, n, (HW_DMA_TCDn_ATTR_RD(x, n) & ~BM_DMA_TCDn_ATTR_SMOD) | BF_DMA_TCDn_ATTR_SMOD(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled)
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_NBYTES_MLNO - TCD Minor Byte Count (Minor Loop Disabled) (RW)
*
* Reset value: 0x00000000U
*
* This register, or one of the next two registers (TCD_NBYTES_MLOFFNO,
* TCD_NBYTES_MLOFFYES), defines the number of bytes to transfer per request. Which
* register to use depends on whether minor loop mapping is disabled, enabled but not
* used for this channel, or enabled and used. TCD word 2 is defined as follows
* if: Minor loop mapping is disabled (CR[EMLM] = 0) If minor loop mapping is
* enabled, see the TCD_NBYTES_MLOFFNO and TCD_NBYTES_MLOFFYES register descriptions
* for TCD word 2's definition.
*/
typedef union _hw_dma_tcdn_nbytes_mlno
{
uint32_t U;
struct _hw_dma_tcdn_nbytes_mlno_bitfields
{
uint32_t NBYTES : 32; //!< [31:0] Minor Byte Transfer Count
} B;
} hw_dma_tcdn_nbytes_mlno_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_NBYTES_MLNO register
*/
//@{
#define HW_DMA_TCDn_NBYTES_MLNO_COUNT (16U)
#define HW_DMA_TCDn_NBYTES_MLNO_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1008U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_NBYTES_MLNO(x, n) (*(__IO hw_dma_tcdn_nbytes_mlno_t *) HW_DMA_TCDn_NBYTES_MLNO_ADDR(x, n))
#define HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U)
#define HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U = (v))
#define HW_DMA_TCDn_NBYTES_MLNO_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) | (v)))
#define HW_DMA_TCDn_NBYTES_MLNO_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_NBYTES_MLNO_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLNO_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_NBYTES_MLNO bitfields
*/
/*!
* @name Register DMA_TCDn_NBYTES_MLNO, field NBYTES[31:0] (RW)
*
* Number of bytes to be transferred in each service request of the channel. As
* a channel activates, the appropriate TCD contents load into the eDMA engine,
* and the appropriate reads and writes perform until the minor byte transfer
* count has transferred. This is an indivisible operation and cannot be halted.
* (Although, it may be stalled by using the bandwidth control field, or via
* preemption.) After the minor count is exhausted, the SADDR and DADDR values are
* written back into the TCD memory, the major iteration count is decremented and
* restored to the TCD memory. If the major iteration count is completed, additional
* processing is performed. An NBYTES value of 0x0000_0000 is interpreted as a 4
* GB transfer.
*/
//@{
#define BP_DMA_TCDn_NBYTES_MLNO_NBYTES (0U) //!< Bit position for DMA_TCDn_NBYTES_MLNO_NBYTES.
#define BM_DMA_TCDn_NBYTES_MLNO_NBYTES (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_NBYTES_MLNO_NBYTES.
#define BS_DMA_TCDn_NBYTES_MLNO_NBYTES (32U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLNO_NBYTES.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_NBYTES_MLNO_NBYTES field.
#define BR_DMA_TCDn_NBYTES_MLNO_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLNO(x, n).U)
#endif
//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLNO_NBYTES.
#define BF_DMA_TCDn_NBYTES_MLNO_NBYTES(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLNO_NBYTES), uint32_t) & BM_DMA_TCDn_NBYTES_MLNO_NBYTES)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NBYTES field to a new value.
#define BW_DMA_TCDn_NBYTES_MLNO_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLNO_WR(x, n, v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled)
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_NBYTES_MLOFFNO - TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled) (RW)
*
* Reset value: 0x00000000U
*
* One of three registers (this register, TCD_NBYTES_MLNO, or
* TCD_NBYTES_MLOFFYES), defines the number of bytes to transfer per request. Which register to use
* depends on whether minor loop mapping is disabled, enabled but not used for
* this channel, or enabled and used. TCD word 2 is defined as follows if: Minor
* loop mapping is enabled (CR[EMLM] = 1) and SMLOE = 0 and DMLOE = 0 If minor
* loop mapping is enabled and SMLOE or DMLOE is set, then refer to the
* TCD_NBYTES_MLOFFYES register description. If minor loop mapping is disabled, then refer to
* the TCD_NBYTES_MLNO register description.
*/
typedef union _hw_dma_tcdn_nbytes_mloffno
{
uint32_t U;
struct _hw_dma_tcdn_nbytes_mloffno_bitfields
{
uint32_t NBYTES : 30; //!< [29:0] Minor Byte Transfer Count
uint32_t DMLOE : 1; //!< [30] Destination Minor Loop Offset enable
uint32_t SMLOE : 1; //!< [31] Source Minor Loop Offset Enable
} B;
} hw_dma_tcdn_nbytes_mloffno_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_NBYTES_MLOFFNO register
*/
//@{
#define HW_DMA_TCDn_NBYTES_MLOFFNO_COUNT (16U)
#define HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1008U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_NBYTES_MLOFFNO(x, n) (*(__IO hw_dma_tcdn_nbytes_mloffno_t *) HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n))
#define HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).U)
#define HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).U = (v))
#define HW_DMA_TCDn_NBYTES_MLOFFNO_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) | (v)))
#define HW_DMA_TCDn_NBYTES_MLOFFNO_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_NBYTES_MLOFFNO_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_NBYTES_MLOFFNO bitfields
*/
/*!
* @name Register DMA_TCDn_NBYTES_MLOFFNO, field NBYTES[29:0] (RW)
*
* Number of bytes to be transferred in each service request of the channel. As
* a channel activates, the appropriate TCD contents load into the eDMA engine,
* and the appropriate reads and writes perform until the minor byte transfer
* count has transferred. This is an indivisible operation and cannot be halted;
* although, it may be stalled by using the bandwidth control field, or via
* preemption. After the minor count is exhausted, the SADDR and DADDR values are written
* back into the TCD memory, the major iteration count is decremented and
* restored to the TCD memory. If the major iteration count is completed, additional
* processing is performed.
*/
//@{
#define BP_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (0U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_NBYTES.
#define BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (0x3FFFFFFFU) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_NBYTES.
#define BS_DMA_TCDn_NBYTES_MLOFFNO_NBYTES (30U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_NBYTES.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_NBYTES field.
#define BR_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLOFFNO(x, n).B.NBYTES)
#endif
//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_NBYTES.
#define BF_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFNO_NBYTES), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NBYTES field to a new value.
#define BW_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFNO_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFNO_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFNO_NBYTES) | BF_DMA_TCDn_NBYTES_MLOFFNO_NBYTES(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_NBYTES_MLOFFNO, field DMLOE[30] (RW)
*
* Selects whether the minor loop offset is applied to the destination address
* upon minor loop completion.
*
* Values:
* - 0 - The minor loop offset is not applied to the DADDR
* - 1 - The minor loop offset is applied to the DADDR
*/
//@{
#define BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (30U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_DMLOE.
#define BM_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (0x40000000U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_DMLOE.
#define BS_DMA_TCDn_NBYTES_MLOFFNO_DMLOE (1U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_DMLOE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_DMLOE field.
#define BR_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE))
#endif
//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_DMLOE.
#define BF_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFNO_DMLOE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DMLOE field to a new value.
#define BW_DMA_TCDn_NBYTES_MLOFFNO_DMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_DMLOE) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_NBYTES_MLOFFNO, field SMLOE[31] (RW)
*
* Selects whether the minor loop offset is applied to the source address upon
* minor loop completion.
*
* Values:
* - 0 - The minor loop offset is not applied to the SADDR
* - 1 - The minor loop offset is applied to the SADDR
*/
//@{
#define BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (31U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFNO_SMLOE.
#define BM_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (0x80000000U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFNO_SMLOE.
#define BS_DMA_TCDn_NBYTES_MLOFFNO_SMLOE (1U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFNO_SMLOE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFNO_SMLOE field.
#define BR_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE))
#endif
//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFNO_SMLOE.
#define BF_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFNO_SMLOE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SMLOE field to a new value.
#define BW_DMA_TCDn_NBYTES_MLOFFNO_SMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFNO_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFNO_SMLOE) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled)
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_NBYTES_MLOFFYES - TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled) (RW)
*
* Reset value: 0x00000000U
*
* One of three registers (this register, TCD_NBYTES_MLNO, or
* TCD_NBYTES_MLOFFNO), defines the number of bytes to transfer per request. Which register to use
* depends on whether minor loop mapping is disabled, enabled but not used for
* this channel, or enabled and used. TCD word 2 is defined as follows if: Minor
* loop mapping is enabled (CR[EMLM] = 1) and Minor loop offset is enabled (SMLOE
* or DMLOE = 1) If minor loop mapping is enabled and SMLOE and DMLOE are cleared,
* then refer to the TCD_NBYTES_MLOFFNO register description. If minor loop
* mapping is disabled, then refer to the TCD_NBYTES_MLNO register description.
*/
typedef union _hw_dma_tcdn_nbytes_mloffyes
{
uint32_t U;
struct _hw_dma_tcdn_nbytes_mloffyes_bitfields
{
uint32_t NBYTES : 10; //!< [9:0] Minor Byte Transfer Count
uint32_t MLOFF : 20; //!< [29:10] If SMLOE or DMLOE is set, this
//! field represents a sign-extended offset applied to the source or
//! destination address to form the next-state value after the minor loop completes.
uint32_t DMLOE : 1; //!< [30] Destination Minor Loop Offset enable
uint32_t SMLOE : 1; //!< [31] Source Minor Loop Offset Enable
} B;
} hw_dma_tcdn_nbytes_mloffyes_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_NBYTES_MLOFFYES register
*/
//@{
#define HW_DMA_TCDn_NBYTES_MLOFFYES_COUNT (16U)
#define HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1008U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_NBYTES_MLOFFYES(x, n) (*(__IO hw_dma_tcdn_nbytes_mloffyes_t *) HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n))
#define HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).U)
#define HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).U = (v))
#define HW_DMA_TCDn_NBYTES_MLOFFYES_SET(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) | (v)))
#define HW_DMA_TCDn_NBYTES_MLOFFYES_CLR(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_NBYTES_MLOFFYES_TOG(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_NBYTES_MLOFFYES bitfields
*/
/*!
* @name Register DMA_TCDn_NBYTES_MLOFFYES, field NBYTES[9:0] (RW)
*
* Number of bytes to be transferred in each service request of the channel. As
* a channel activates, the appropriate TCD contents load into the eDMA engine,
* and the appropriate reads and writes perform until the minor byte transfer
* count has transferred. This is an indivisible operation and cannot be halted.
* (Although, it may be stalled by using the bandwidth control field, or via
* preemption.) After the minor count is exhausted, the SADDR and DADDR values are
* written back into the TCD memory, the major iteration count is decremented and
* restored to the TCD memory. If the major iteration count is completed, additional
* processing is performed.
*/
//@{
#define BP_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (0U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_NBYTES.
#define BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (0x000003FFU) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_NBYTES.
#define BS_DMA_TCDn_NBYTES_MLOFFYES_NBYTES (10U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_NBYTES.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_NBYTES field.
#define BR_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).B.NBYTES)
#endif
//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_NBYTES.
#define BF_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFYES_NBYTES), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES)
#ifndef __LANGUAGE_ASM__
//! @brief Set the NBYTES field to a new value.
#define BW_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFYES_NBYTES) | BF_DMA_TCDn_NBYTES_MLOFFYES_NBYTES(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_NBYTES_MLOFFYES, field MLOFF[29:10] (RW)
*/
//@{
#define BP_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (10U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_MLOFF.
#define BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (0x3FFFFC00U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_MLOFF.
#define BS_DMA_TCDn_NBYTES_MLOFFYES_MLOFF (20U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_MLOFF.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_MLOFF field.
#define BR_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(x, n) (HW_DMA_TCDn_NBYTES_MLOFFYES(x, n).B.MLOFF)
#endif
//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_MLOFF.
#define BF_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFYES_MLOFF), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF)
#ifndef __LANGUAGE_ASM__
//! @brief Set the MLOFF field to a new value.
#define BW_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(x, n, v) (HW_DMA_TCDn_NBYTES_MLOFFYES_WR(x, n, (HW_DMA_TCDn_NBYTES_MLOFFYES_RD(x, n) & ~BM_DMA_TCDn_NBYTES_MLOFFYES_MLOFF) | BF_DMA_TCDn_NBYTES_MLOFFYES_MLOFF(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_NBYTES_MLOFFYES, field DMLOE[30] (RW)
*
* Selects whether the minor loop offset is applied to the destination address
* upon minor loop completion.
*
* Values:
* - 0 - The minor loop offset is not applied to the DADDR
* - 1 - The minor loop offset is applied to the DADDR
*/
//@{
#define BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (30U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_DMLOE.
#define BM_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (0x40000000U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_DMLOE.
#define BS_DMA_TCDn_NBYTES_MLOFFYES_DMLOE (1U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_DMLOE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_DMLOE field.
#define BR_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE))
#endif
//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_DMLOE.
#define BF_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFYES_DMLOE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DMLOE field to a new value.
#define BW_DMA_TCDn_NBYTES_MLOFFYES_DMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_DMLOE) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_NBYTES_MLOFFYES, field SMLOE[31] (RW)
*
* Selects whether the minor loop offset is applied to the source address upon
* minor loop completion.
*
* Values:
* - 0 - The minor loop offset is not applied to the SADDR
* - 1 - The minor loop offset is applied to the SADDR
*/
//@{
#define BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (31U) //!< Bit position for DMA_TCDn_NBYTES_MLOFFYES_SMLOE.
#define BM_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (0x80000000U) //!< Bit mask for DMA_TCDn_NBYTES_MLOFFYES_SMLOE.
#define BS_DMA_TCDn_NBYTES_MLOFFYES_SMLOE (1U) //!< Bit field size in bits for DMA_TCDn_NBYTES_MLOFFYES_SMLOE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_NBYTES_MLOFFYES_SMLOE field.
#define BR_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(x, n) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE))
#endif
//! @brief Format value for bitfield DMA_TCDn_NBYTES_MLOFFYES_SMLOE.
#define BF_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE), uint32_t) & BM_DMA_TCDn_NBYTES_MLOFFYES_SMLOE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SMLOE field to a new value.
#define BW_DMA_TCDn_NBYTES_MLOFFYES_SMLOE(x, n, v) (BITBAND_ACCESS32(HW_DMA_TCDn_NBYTES_MLOFFYES_ADDR(x, n), BP_DMA_TCDn_NBYTES_MLOFFYES_SMLOE) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_SLAST - TCD Last Source Address Adjustment (RW)
*
* Reset value: 0x00000000U
*/
typedef union _hw_dma_tcdn_slast
{
uint32_t U;
struct _hw_dma_tcdn_slast_bitfields
{
uint32_t SLAST : 32; //!< [31:0] Last source Address Adjustment
} B;
} hw_dma_tcdn_slast_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_SLAST register
*/
//@{
#define HW_DMA_TCDn_SLAST_COUNT (16U)
#define HW_DMA_TCDn_SLAST_ADDR(x, n) (REGS_DMA_BASE(x) + 0x100CU + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_SLAST(x, n) (*(__IO hw_dma_tcdn_slast_t *) HW_DMA_TCDn_SLAST_ADDR(x, n))
#define HW_DMA_TCDn_SLAST_RD(x, n) (HW_DMA_TCDn_SLAST(x, n).U)
#define HW_DMA_TCDn_SLAST_WR(x, n, v) (HW_DMA_TCDn_SLAST(x, n).U = (v))
#define HW_DMA_TCDn_SLAST_SET(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) | (v)))
#define HW_DMA_TCDn_SLAST_CLR(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_SLAST_TOG(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, HW_DMA_TCDn_SLAST_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_SLAST bitfields
*/
/*!
* @name Register DMA_TCDn_SLAST, field SLAST[31:0] (RW)
*
* Adjustment value added to the source address at the completion of the major
* iteration count. This value can be applied to restore the source address to the
* initial value, or adjust the address to reference the next data structure.
* This register uses two's complement notation; the overflow bit is discarded.
*/
//@{
#define BP_DMA_TCDn_SLAST_SLAST (0U) //!< Bit position for DMA_TCDn_SLAST_SLAST.
#define BM_DMA_TCDn_SLAST_SLAST (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_SLAST_SLAST.
#define BS_DMA_TCDn_SLAST_SLAST (32U) //!< Bit field size in bits for DMA_TCDn_SLAST_SLAST.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_SLAST_SLAST field.
#define BR_DMA_TCDn_SLAST_SLAST(x, n) (HW_DMA_TCDn_SLAST(x, n).U)
#endif
//! @brief Format value for bitfield DMA_TCDn_SLAST_SLAST.
#define BF_DMA_TCDn_SLAST_SLAST(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_SLAST_SLAST), uint32_t) & BM_DMA_TCDn_SLAST_SLAST)
#ifndef __LANGUAGE_ASM__
//! @brief Set the SLAST field to a new value.
#define BW_DMA_TCDn_SLAST_SLAST(x, n, v) (HW_DMA_TCDn_SLAST_WR(x, n, v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_DADDR - TCD Destination Address
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_DADDR - TCD Destination Address (RW)
*
* Reset value: 0x00000000U
*/
typedef union _hw_dma_tcdn_daddr
{
uint32_t U;
struct _hw_dma_tcdn_daddr_bitfields
{
uint32_t DADDR : 32; //!< [31:0] Destination Address
} B;
} hw_dma_tcdn_daddr_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_DADDR register
*/
//@{
#define HW_DMA_TCDn_DADDR_COUNT (16U)
#define HW_DMA_TCDn_DADDR_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1010U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_DADDR(x, n) (*(__IO hw_dma_tcdn_daddr_t *) HW_DMA_TCDn_DADDR_ADDR(x, n))
#define HW_DMA_TCDn_DADDR_RD(x, n) (HW_DMA_TCDn_DADDR(x, n).U)
#define HW_DMA_TCDn_DADDR_WR(x, n, v) (HW_DMA_TCDn_DADDR(x, n).U = (v))
#define HW_DMA_TCDn_DADDR_SET(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) | (v)))
#define HW_DMA_TCDn_DADDR_CLR(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_DADDR_TOG(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, HW_DMA_TCDn_DADDR_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_DADDR bitfields
*/
/*!
* @name Register DMA_TCDn_DADDR, field DADDR[31:0] (RW)
*
* Memory address pointing to the destination data.
*/
//@{
#define BP_DMA_TCDn_DADDR_DADDR (0U) //!< Bit position for DMA_TCDn_DADDR_DADDR.
#define BM_DMA_TCDn_DADDR_DADDR (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_DADDR_DADDR.
#define BS_DMA_TCDn_DADDR_DADDR (32U) //!< Bit field size in bits for DMA_TCDn_DADDR_DADDR.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_DADDR_DADDR field.
#define BR_DMA_TCDn_DADDR_DADDR(x, n) (HW_DMA_TCDn_DADDR(x, n).U)
#endif
//! @brief Format value for bitfield DMA_TCDn_DADDR_DADDR.
#define BF_DMA_TCDn_DADDR_DADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_DADDR_DADDR), uint32_t) & BM_DMA_TCDn_DADDR_DADDR)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DADDR field to a new value.
#define BW_DMA_TCDn_DADDR_DADDR(x, n, v) (HW_DMA_TCDn_DADDR_WR(x, n, v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_DOFF - TCD Signed Destination Address Offset (RW)
*
* Reset value: 0x0000U
*/
typedef union _hw_dma_tcdn_doff
{
uint16_t U;
struct _hw_dma_tcdn_doff_bitfields
{
uint16_t DOFF : 16; //!< [15:0] Destination Address Signed offset
} B;
} hw_dma_tcdn_doff_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_DOFF register
*/
//@{
#define HW_DMA_TCDn_DOFF_COUNT (16U)
#define HW_DMA_TCDn_DOFF_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1014U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_DOFF(x, n) (*(__IO hw_dma_tcdn_doff_t *) HW_DMA_TCDn_DOFF_ADDR(x, n))
#define HW_DMA_TCDn_DOFF_RD(x, n) (HW_DMA_TCDn_DOFF(x, n).U)
#define HW_DMA_TCDn_DOFF_WR(x, n, v) (HW_DMA_TCDn_DOFF(x, n).U = (v))
#define HW_DMA_TCDn_DOFF_SET(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) | (v)))
#define HW_DMA_TCDn_DOFF_CLR(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_DOFF_TOG(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, HW_DMA_TCDn_DOFF_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_DOFF bitfields
*/
/*!
* @name Register DMA_TCDn_DOFF, field DOFF[15:0] (RW)
*
* Sign-extended offset applied to the current destination address to form the
* next-state value as each destination write is completed.
*/
//@{
#define BP_DMA_TCDn_DOFF_DOFF (0U) //!< Bit position for DMA_TCDn_DOFF_DOFF.
#define BM_DMA_TCDn_DOFF_DOFF (0xFFFFU) //!< Bit mask for DMA_TCDn_DOFF_DOFF.
#define BS_DMA_TCDn_DOFF_DOFF (16U) //!< Bit field size in bits for DMA_TCDn_DOFF_DOFF.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_DOFF_DOFF field.
#define BR_DMA_TCDn_DOFF_DOFF(x, n) (HW_DMA_TCDn_DOFF(x, n).U)
#endif
//! @brief Format value for bitfield DMA_TCDn_DOFF_DOFF.
#define BF_DMA_TCDn_DOFF_DOFF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_DOFF_DOFF), uint16_t) & BM_DMA_TCDn_DOFF_DOFF)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DOFF field to a new value.
#define BW_DMA_TCDn_DOFF_DOFF(x, n, v) (HW_DMA_TCDn_DOFF_WR(x, n, v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled)
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_CITER_ELINKNO - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled) (RW)
*
* Reset value: 0x0000U
*
* If TCDn_CITER[ELINK] is cleared, the TCDn_CITER register is defined as
* follows.
*/
typedef union _hw_dma_tcdn_citer_elinkno
{
uint16_t U;
struct _hw_dma_tcdn_citer_elinkno_bitfields
{
uint16_t CITER : 15; //!< [14:0] Current Major Iteration Count
uint16_t ELINK : 1; //!< [15] Enable channel-to-channel linking on
//! minor-loop complete
} B;
} hw_dma_tcdn_citer_elinkno_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_CITER_ELINKNO register
*/
//@{
#define HW_DMA_TCDn_CITER_ELINKNO_COUNT (16U)
#define HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1016U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_CITER_ELINKNO(x, n) (*(__IO hw_dma_tcdn_citer_elinkno_t *) HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n))
#define HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) (HW_DMA_TCDn_CITER_ELINKNO(x, n).U)
#define HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO(x, n).U = (v))
#define HW_DMA_TCDn_CITER_ELINKNO_SET(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) | (v)))
#define HW_DMA_TCDn_CITER_ELINKNO_CLR(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_CITER_ELINKNO_TOG(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_CITER_ELINKNO bitfields
*/
/*!
* @name Register DMA_TCDn_CITER_ELINKNO, field CITER[14:0] (RW)
*
* This 9-bit (ELINK = 1) or 15-bit (ELINK = 0) count represents the current
* major loop count for the channel. It is decremented each time the minor loop is
* completed and updated in the transfer control descriptor memory. After the
* major iteration count is exhausted, the channel performs a number of operations
* (e.g., final source and destination address calculations), optionally generating
* an interrupt to signal channel completion before reloading the CITER field
* from the beginning iteration count (BITER) field. When the CITER field is
* initially loaded by software, it must be set to the same value as that contained in
* the BITER field. If the channel is configured to execute a single service
* request, the initial values of BITER and CITER should be 0x0001.
*/
//@{
#define BP_DMA_TCDn_CITER_ELINKNO_CITER (0U) //!< Bit position for DMA_TCDn_CITER_ELINKNO_CITER.
#define BM_DMA_TCDn_CITER_ELINKNO_CITER (0x7FFFU) //!< Bit mask for DMA_TCDn_CITER_ELINKNO_CITER.
#define BS_DMA_TCDn_CITER_ELINKNO_CITER (15U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKNO_CITER.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CITER_ELINKNO_CITER field.
#define BR_DMA_TCDn_CITER_ELINKNO_CITER(x, n) (HW_DMA_TCDn_CITER_ELINKNO(x, n).B.CITER)
#endif
//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKNO_CITER.
#define BF_DMA_TCDn_CITER_ELINKNO_CITER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKNO_CITER), uint16_t) & BM_DMA_TCDn_CITER_ELINKNO_CITER)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CITER field to a new value.
#define BW_DMA_TCDn_CITER_ELINKNO_CITER(x, n, v) (HW_DMA_TCDn_CITER_ELINKNO_WR(x, n, (HW_DMA_TCDn_CITER_ELINKNO_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKNO_CITER) | BF_DMA_TCDn_CITER_ELINKNO_CITER(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_CITER_ELINKNO, field ELINK[15] (RW)
*
* As the channel completes the minor loop, this flag enables linking to another
* channel, defined by the LINKCH field. The link target channel initiates a
* channel service request via an internal mechanism that sets the TCDn_CSR[START]
* bit of the specified channel. If channel linking is disabled, the CITER value
* is extended to 15 bits in place of a link channel number. If the major loop is
* exhausted, this link mechanism is suppressed in favor of the MAJORELINK
* channel linking. This bit must be equal to the BITER[ELINK] bit; otherwise, a
* configuration error is reported.
*
* Values:
* - 0 - The channel-to-channel linking is disabled
* - 1 - The channel-to-channel linking is enabled
*/
//@{
#define BP_DMA_TCDn_CITER_ELINKNO_ELINK (15U) //!< Bit position for DMA_TCDn_CITER_ELINKNO_ELINK.
#define BM_DMA_TCDn_CITER_ELINKNO_ELINK (0x8000U) //!< Bit mask for DMA_TCDn_CITER_ELINKNO_ELINK.
#define BS_DMA_TCDn_CITER_ELINKNO_ELINK (1U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKNO_ELINK.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CITER_ELINKNO_ELINK field.
#define BR_DMA_TCDn_CITER_ELINKNO_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKNO_ELINK))
#endif
//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKNO_ELINK.
#define BF_DMA_TCDn_CITER_ELINKNO_ELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKNO_ELINK), uint16_t) & BM_DMA_TCDn_CITER_ELINKNO_ELINK)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ELINK field to a new value.
#define BW_DMA_TCDn_CITER_ELINKNO_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKNO_ELINK) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled)
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_CITER_ELINKYES - TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled) (RW)
*
* Reset value: 0x0000U
*
* If TCDn_CITER[ELINK] is set, the TCDn_CITER register is defined as follows.
*/
typedef union _hw_dma_tcdn_citer_elinkyes
{
uint16_t U;
struct _hw_dma_tcdn_citer_elinkyes_bitfields
{
uint16_t CITER : 9; //!< [8:0] Current Major Iteration Count
uint16_t LINKCH : 4; //!< [12:9] Link Channel Number
uint16_t RESERVED0 : 2; //!< [14:13]
uint16_t ELINK : 1; //!< [15] Enable channel-to-channel linking on
//! minor-loop complete
} B;
} hw_dma_tcdn_citer_elinkyes_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_CITER_ELINKYES register
*/
//@{
#define HW_DMA_TCDn_CITER_ELINKYES_COUNT (16U)
#define HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1016U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_CITER_ELINKYES(x, n) (*(__IO hw_dma_tcdn_citer_elinkyes_t *) HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n))
#define HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).U)
#define HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES(x, n).U = (v))
#define HW_DMA_TCDn_CITER_ELINKYES_SET(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) | (v)))
#define HW_DMA_TCDn_CITER_ELINKYES_CLR(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_CITER_ELINKYES_TOG(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_CITER_ELINKYES bitfields
*/
/*!
* @name Register DMA_TCDn_CITER_ELINKYES, field CITER[8:0] (RW)
*
* This 9-bit (ELINK = 1) or 15-bit (ELINK = 0) count represents the current
* major loop count for the channel. It is decremented each time the minor loop is
* completed and updated in the transfer control descriptor memory. After the
* major iteration count is exhausted, the channel performs a number of operations
* (e.g., final source and destination address calculations), optionally generating
* an interrupt to signal channel completion before reloading the CITER field
* from the beginning iteration count (BITER) field. When the CITER field is
* initially loaded by software, it must be set to the same value as that contained in
* the BITER field. If the channel is configured to execute a single service
* request, the initial values of BITER and CITER should be 0x0001.
*/
//@{
#define BP_DMA_TCDn_CITER_ELINKYES_CITER (0U) //!< Bit position for DMA_TCDn_CITER_ELINKYES_CITER.
#define BM_DMA_TCDn_CITER_ELINKYES_CITER (0x01FFU) //!< Bit mask for DMA_TCDn_CITER_ELINKYES_CITER.
#define BS_DMA_TCDn_CITER_ELINKYES_CITER (9U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_CITER.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_CITER field.
#define BR_DMA_TCDn_CITER_ELINKYES_CITER(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).B.CITER)
#endif
//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_CITER.
#define BF_DMA_TCDn_CITER_ELINKYES_CITER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKYES_CITER), uint16_t) & BM_DMA_TCDn_CITER_ELINKYES_CITER)
#ifndef __LANGUAGE_ASM__
//! @brief Set the CITER field to a new value.
#define BW_DMA_TCDn_CITER_ELINKYES_CITER(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKYES_CITER) | BF_DMA_TCDn_CITER_ELINKYES_CITER(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_CITER_ELINKYES, field LINKCH[12:9] (RW)
*
* If channel-to-channel linking is enabled (ELINK = 1), then after the minor
* loop is exhausted, the eDMA engine initiates a channel service request to the
* channel defined by these four bits by setting that channel's TCDn_CSR[START] bit.
*/
//@{
#define BP_DMA_TCDn_CITER_ELINKYES_LINKCH (9U) //!< Bit position for DMA_TCDn_CITER_ELINKYES_LINKCH.
#define BM_DMA_TCDn_CITER_ELINKYES_LINKCH (0x1E00U) //!< Bit mask for DMA_TCDn_CITER_ELINKYES_LINKCH.
#define BS_DMA_TCDn_CITER_ELINKYES_LINKCH (4U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_LINKCH.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_LINKCH field.
#define BR_DMA_TCDn_CITER_ELINKYES_LINKCH(x, n) (HW_DMA_TCDn_CITER_ELINKYES(x, n).B.LINKCH)
#endif
//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_LINKCH.
#define BF_DMA_TCDn_CITER_ELINKYES_LINKCH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKYES_LINKCH), uint16_t) & BM_DMA_TCDn_CITER_ELINKYES_LINKCH)
#ifndef __LANGUAGE_ASM__
//! @brief Set the LINKCH field to a new value.
#define BW_DMA_TCDn_CITER_ELINKYES_LINKCH(x, n, v) (HW_DMA_TCDn_CITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_CITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_CITER_ELINKYES_LINKCH) | BF_DMA_TCDn_CITER_ELINKYES_LINKCH(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_CITER_ELINKYES, field ELINK[15] (RW)
*
* As the channel completes the minor loop, this flag enables linking to another
* channel, defined by the LINKCH field. The link target channel initiates a
* channel service request via an internal mechanism that sets the TCDn_CSR[START]
* bit of the specified channel. If channel linking is disabled, the CITER value
* is extended to 15 bits in place of a link channel number. If the major loop is
* exhausted, this link mechanism is suppressed in favor of the MAJORELINK
* channel linking. This bit must be equal to the BITER[ELINK] bit; otherwise, a
* configuration error is reported.
*
* Values:
* - 0 - The channel-to-channel linking is disabled
* - 1 - The channel-to-channel linking is enabled
*/
//@{
#define BP_DMA_TCDn_CITER_ELINKYES_ELINK (15U) //!< Bit position for DMA_TCDn_CITER_ELINKYES_ELINK.
#define BM_DMA_TCDn_CITER_ELINKYES_ELINK (0x8000U) //!< Bit mask for DMA_TCDn_CITER_ELINKYES_ELINK.
#define BS_DMA_TCDn_CITER_ELINKYES_ELINK (1U) //!< Bit field size in bits for DMA_TCDn_CITER_ELINKYES_ELINK.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CITER_ELINKYES_ELINK field.
#define BR_DMA_TCDn_CITER_ELINKYES_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKYES_ELINK))
#endif
//! @brief Format value for bitfield DMA_TCDn_CITER_ELINKYES_ELINK.
#define BF_DMA_TCDn_CITER_ELINKYES_ELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CITER_ELINKYES_ELINK), uint16_t) & BM_DMA_TCDn_CITER_ELINKYES_ELINK)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ELINK field to a new value.
#define BW_DMA_TCDn_CITER_ELINKYES_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_CITER_ELINKYES_ELINK) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_DLASTSGA - TCD Last Destination Address Adjustment/Scatter Gather Address (RW)
*
* Reset value: 0x00000000U
*/
typedef union _hw_dma_tcdn_dlastsga
{
uint32_t U;
struct _hw_dma_tcdn_dlastsga_bitfields
{
uint32_t DLASTSGA : 32; //!< [31:0]
} B;
} hw_dma_tcdn_dlastsga_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_DLASTSGA register
*/
//@{
#define HW_DMA_TCDn_DLASTSGA_COUNT (16U)
#define HW_DMA_TCDn_DLASTSGA_ADDR(x, n) (REGS_DMA_BASE(x) + 0x1018U + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_DLASTSGA(x, n) (*(__IO hw_dma_tcdn_dlastsga_t *) HW_DMA_TCDn_DLASTSGA_ADDR(x, n))
#define HW_DMA_TCDn_DLASTSGA_RD(x, n) (HW_DMA_TCDn_DLASTSGA(x, n).U)
#define HW_DMA_TCDn_DLASTSGA_WR(x, n, v) (HW_DMA_TCDn_DLASTSGA(x, n).U = (v))
#define HW_DMA_TCDn_DLASTSGA_SET(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) | (v)))
#define HW_DMA_TCDn_DLASTSGA_CLR(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_DLASTSGA_TOG(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, HW_DMA_TCDn_DLASTSGA_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_DLASTSGA bitfields
*/
/*!
* @name Register DMA_TCDn_DLASTSGA, field DLASTSGA[31:0] (RW)
*
* Destination last address adjustment or the memory address for the next
* transfer control descriptor to be loaded into this channel (scatter/gather). If
* (TCDn_CSR[ESG] = 0), then: Adjustment value added to the destination address at
* the completion of the major iteration count. This value can apply to restore the
* destination address to the initial value or adjust the address to reference
* the next data structure. This field uses two's complement notation for the
* final destination address adjustment. Otherwise: This address points to the
* beginning of a 0-modulo-32-byte region containing the next transfer control
* descriptor to be loaded into this channel. This channel reload is performed as the
* major iteration count completes. The scatter/gather address must be
* 0-modulo-32-byte, else a configuration error is reported.
*/
//@{
#define BP_DMA_TCDn_DLASTSGA_DLASTSGA (0U) //!< Bit position for DMA_TCDn_DLASTSGA_DLASTSGA.
#define BM_DMA_TCDn_DLASTSGA_DLASTSGA (0xFFFFFFFFU) //!< Bit mask for DMA_TCDn_DLASTSGA_DLASTSGA.
#define BS_DMA_TCDn_DLASTSGA_DLASTSGA (32U) //!< Bit field size in bits for DMA_TCDn_DLASTSGA_DLASTSGA.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_DLASTSGA_DLASTSGA field.
#define BR_DMA_TCDn_DLASTSGA_DLASTSGA(x, n) (HW_DMA_TCDn_DLASTSGA(x, n).U)
#endif
//! @brief Format value for bitfield DMA_TCDn_DLASTSGA_DLASTSGA.
#define BF_DMA_TCDn_DLASTSGA_DLASTSGA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint32_t) << BP_DMA_TCDn_DLASTSGA_DLASTSGA), uint32_t) & BM_DMA_TCDn_DLASTSGA_DLASTSGA)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DLASTSGA field to a new value.
#define BW_DMA_TCDn_DLASTSGA_DLASTSGA(x, n, v) (HW_DMA_TCDn_DLASTSGA_WR(x, n, v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_CSR - TCD Control and Status
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_CSR - TCD Control and Status (RW)
*
* Reset value: 0x0000U
*/
typedef union _hw_dma_tcdn_csr
{
uint16_t U;
struct _hw_dma_tcdn_csr_bitfields
{
uint16_t START : 1; //!< [0] Channel Start
uint16_t INTMAJOR : 1; //!< [1] Enable an interrupt when major
//! iteration count completes
uint16_t INTHALF : 1; //!< [2] Enable an interrupt when major counter
//! is half complete.
uint16_t DREQ : 1; //!< [3] Disable Request
uint16_t ESG : 1; //!< [4] Enable Scatter/Gather Processing
uint16_t MAJORELINK : 1; //!< [5] Enable channel-to-channel linking
//! on major loop complete
uint16_t ACTIVE : 1; //!< [6] Channel Active
uint16_t DONE : 1; //!< [7] Channel Done
uint16_t MAJORLINKCH : 4; //!< [11:8] Link Channel Number
uint16_t RESERVED0 : 2; //!< [13:12]
uint16_t BWC : 2; //!< [15:14] Bandwidth Control
} B;
} hw_dma_tcdn_csr_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_CSR register
*/
//@{
#define HW_DMA_TCDn_CSR_COUNT (16U)
#define HW_DMA_TCDn_CSR_ADDR(x, n) (REGS_DMA_BASE(x) + 0x101CU + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_CSR(x, n) (*(__IO hw_dma_tcdn_csr_t *) HW_DMA_TCDn_CSR_ADDR(x, n))
#define HW_DMA_TCDn_CSR_RD(x, n) (HW_DMA_TCDn_CSR(x, n).U)
#define HW_DMA_TCDn_CSR_WR(x, n, v) (HW_DMA_TCDn_CSR(x, n).U = (v))
#define HW_DMA_TCDn_CSR_SET(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) | (v)))
#define HW_DMA_TCDn_CSR_CLR(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_CSR_TOG(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, HW_DMA_TCDn_CSR_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_CSR bitfields
*/
/*!
* @name Register DMA_TCDn_CSR, field START[0] (RW)
*
* If this flag is set, the channel is requesting service. The eDMA hardware
* automatically clears this flag after the channel begins execution.
*
* Values:
* - 0 - The channel is not explicitly started
* - 1 - The channel is explicitly started via a software initiated service
* request
*/
//@{
#define BP_DMA_TCDn_CSR_START (0U) //!< Bit position for DMA_TCDn_CSR_START.
#define BM_DMA_TCDn_CSR_START (0x0001U) //!< Bit mask for DMA_TCDn_CSR_START.
#define BS_DMA_TCDn_CSR_START (1U) //!< Bit field size in bits for DMA_TCDn_CSR_START.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_START field.
#define BR_DMA_TCDn_CSR_START(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_START))
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_START.
#define BF_DMA_TCDn_CSR_START(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_START), uint16_t) & BM_DMA_TCDn_CSR_START)
#ifndef __LANGUAGE_ASM__
//! @brief Set the START field to a new value.
#define BW_DMA_TCDn_CSR_START(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_START) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field INTMAJOR[1] (RW)
*
* If this flag is set, the channel generates an interrupt request by setting
* the appropriate bit in the INT when the current major iteration count reaches
* zero.
*
* Values:
* - 0 - The end-of-major loop interrupt is disabled
* - 1 - The end-of-major loop interrupt is enabled
*/
//@{
#define BP_DMA_TCDn_CSR_INTMAJOR (1U) //!< Bit position for DMA_TCDn_CSR_INTMAJOR.
#define BM_DMA_TCDn_CSR_INTMAJOR (0x0002U) //!< Bit mask for DMA_TCDn_CSR_INTMAJOR.
#define BS_DMA_TCDn_CSR_INTMAJOR (1U) //!< Bit field size in bits for DMA_TCDn_CSR_INTMAJOR.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_INTMAJOR field.
#define BR_DMA_TCDn_CSR_INTMAJOR(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTMAJOR))
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_INTMAJOR.
#define BF_DMA_TCDn_CSR_INTMAJOR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_INTMAJOR), uint16_t) & BM_DMA_TCDn_CSR_INTMAJOR)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INTMAJOR field to a new value.
#define BW_DMA_TCDn_CSR_INTMAJOR(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTMAJOR) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field INTHALF[2] (RW)
*
* If this flag is set, the channel generates an interrupt request by setting
* the appropriate bit in the INT register when the current major iteration count
* reaches the halfway point. Specifically, the comparison performed by the eDMA
* engine is (CITER == (BITER >> 1)). This halfway point interrupt request is
* provided to support double-buffered (aka ping-pong) schemes or other types of data
* movement where the processor needs an early indication of the transfer's
* progress. If BITER is set, do not use INTHALF. Use INTMAJOR instead.
*
* Values:
* - 0 - The half-point interrupt is disabled
* - 1 - The half-point interrupt is enabled
*/
//@{
#define BP_DMA_TCDn_CSR_INTHALF (2U) //!< Bit position for DMA_TCDn_CSR_INTHALF.
#define BM_DMA_TCDn_CSR_INTHALF (0x0004U) //!< Bit mask for DMA_TCDn_CSR_INTHALF.
#define BS_DMA_TCDn_CSR_INTHALF (1U) //!< Bit field size in bits for DMA_TCDn_CSR_INTHALF.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_INTHALF field.
#define BR_DMA_TCDn_CSR_INTHALF(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTHALF))
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_INTHALF.
#define BF_DMA_TCDn_CSR_INTHALF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_INTHALF), uint16_t) & BM_DMA_TCDn_CSR_INTHALF)
#ifndef __LANGUAGE_ASM__
//! @brief Set the INTHALF field to a new value.
#define BW_DMA_TCDn_CSR_INTHALF(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_INTHALF) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field DREQ[3] (RW)
*
* If this flag is set, the eDMA hardware automatically clears the corresponding
* ERQ bit when the current major iteration count reaches zero.
*
* Values:
* - 0 - The channel's ERQ bit is not affected
* - 1 - The channel's ERQ bit is cleared when the major loop is complete
*/
//@{
#define BP_DMA_TCDn_CSR_DREQ (3U) //!< Bit position for DMA_TCDn_CSR_DREQ.
#define BM_DMA_TCDn_CSR_DREQ (0x0008U) //!< Bit mask for DMA_TCDn_CSR_DREQ.
#define BS_DMA_TCDn_CSR_DREQ (1U) //!< Bit field size in bits for DMA_TCDn_CSR_DREQ.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_DREQ field.
#define BR_DMA_TCDn_CSR_DREQ(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DREQ))
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_DREQ.
#define BF_DMA_TCDn_CSR_DREQ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_DREQ), uint16_t) & BM_DMA_TCDn_CSR_DREQ)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DREQ field to a new value.
#define BW_DMA_TCDn_CSR_DREQ(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DREQ) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field ESG[4] (RW)
*
* As the channel completes the major loop, this flag enables scatter/gather
* processing in the current channel. If enabled, the eDMA engine uses DLASTSGA as a
* memory pointer to a 0-modulo-32 address containing a 32-byte data structure
* loaded as the transfer control descriptor into the local memory. To support the
* dynamic scatter/gather coherency model, this field is forced to zero when
* written to while the TCDn_CSR[DONE] bit is set.
*
* Values:
* - 0 - The current channel's TCD is normal format.
* - 1 - The current channel's TCD specifies a scatter gather format. The
* DLASTSGA field provides a memory pointer to the next TCD to be loaded into this
* channel after the major loop completes its execution.
*/
//@{
#define BP_DMA_TCDn_CSR_ESG (4U) //!< Bit position for DMA_TCDn_CSR_ESG.
#define BM_DMA_TCDn_CSR_ESG (0x0010U) //!< Bit mask for DMA_TCDn_CSR_ESG.
#define BS_DMA_TCDn_CSR_ESG (1U) //!< Bit field size in bits for DMA_TCDn_CSR_ESG.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_ESG field.
#define BR_DMA_TCDn_CSR_ESG(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ESG))
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_ESG.
#define BF_DMA_TCDn_CSR_ESG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_ESG), uint16_t) & BM_DMA_TCDn_CSR_ESG)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ESG field to a new value.
#define BW_DMA_TCDn_CSR_ESG(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ESG) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field MAJORELINK[5] (RW)
*
* As the channel completes the major loop, this flag enables the linking to
* another channel, defined by MAJORLINKCH. The link target channel initiates a
* channel service request via an internal mechanism that sets the TCDn_CSR[START]
* bit of the specified channel. To support the dynamic linking coherency model,
* this field is forced to zero when written to while the TCDn_CSR[DONE] bit is set.
*
* Values:
* - 0 - The channel-to-channel linking is disabled
* - 1 - The channel-to-channel linking is enabled
*/
//@{
#define BP_DMA_TCDn_CSR_MAJORELINK (5U) //!< Bit position for DMA_TCDn_CSR_MAJORELINK.
#define BM_DMA_TCDn_CSR_MAJORELINK (0x0020U) //!< Bit mask for DMA_TCDn_CSR_MAJORELINK.
#define BS_DMA_TCDn_CSR_MAJORELINK (1U) //!< Bit field size in bits for DMA_TCDn_CSR_MAJORELINK.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_MAJORELINK field.
#define BR_DMA_TCDn_CSR_MAJORELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_MAJORELINK))
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_MAJORELINK.
#define BF_DMA_TCDn_CSR_MAJORELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_MAJORELINK), uint16_t) & BM_DMA_TCDn_CSR_MAJORELINK)
#ifndef __LANGUAGE_ASM__
//! @brief Set the MAJORELINK field to a new value.
#define BW_DMA_TCDn_CSR_MAJORELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_MAJORELINK) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field ACTIVE[6] (RW)
*
* This flag signals the channel is currently in execution. It is set when
* channel service begins, and the eDMA clears it as the minor loop completes or if
* any error condition is detected. This bit resets to zero.
*/
//@{
#define BP_DMA_TCDn_CSR_ACTIVE (6U) //!< Bit position for DMA_TCDn_CSR_ACTIVE.
#define BM_DMA_TCDn_CSR_ACTIVE (0x0040U) //!< Bit mask for DMA_TCDn_CSR_ACTIVE.
#define BS_DMA_TCDn_CSR_ACTIVE (1U) //!< Bit field size in bits for DMA_TCDn_CSR_ACTIVE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_ACTIVE field.
#define BR_DMA_TCDn_CSR_ACTIVE(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ACTIVE))
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_ACTIVE.
#define BF_DMA_TCDn_CSR_ACTIVE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_ACTIVE), uint16_t) & BM_DMA_TCDn_CSR_ACTIVE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ACTIVE field to a new value.
#define BW_DMA_TCDn_CSR_ACTIVE(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_ACTIVE) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field DONE[7] (RW)
*
* This flag indicates the eDMA has completed the major loop. The eDMA engine
* sets it as the CITER count reaches zero; The software clears it, or the hardware
* when the channel is activated. This bit must be cleared to write the
* MAJORELINK or ESG bits.
*/
//@{
#define BP_DMA_TCDn_CSR_DONE (7U) //!< Bit position for DMA_TCDn_CSR_DONE.
#define BM_DMA_TCDn_CSR_DONE (0x0080U) //!< Bit mask for DMA_TCDn_CSR_DONE.
#define BS_DMA_TCDn_CSR_DONE (1U) //!< Bit field size in bits for DMA_TCDn_CSR_DONE.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_DONE field.
#define BR_DMA_TCDn_CSR_DONE(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DONE))
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_DONE.
#define BF_DMA_TCDn_CSR_DONE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_DONE), uint16_t) & BM_DMA_TCDn_CSR_DONE)
#ifndef __LANGUAGE_ASM__
//! @brief Set the DONE field to a new value.
#define BW_DMA_TCDn_CSR_DONE(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_CSR_ADDR(x, n), BP_DMA_TCDn_CSR_DONE) = (v))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field MAJORLINKCH[11:8] (RW)
*
* If (MAJORELINK = 0) then No channel-to-channel linking (or chaining) is
* performed after the major loop counter is exhausted. else After the major loop
* counter is exhausted, the eDMA engine initiates a channel service request at the
* channel defined by these six bits by setting that channel's TCDn_CSR[START] bit.
*/
//@{
#define BP_DMA_TCDn_CSR_MAJORLINKCH (8U) //!< Bit position for DMA_TCDn_CSR_MAJORLINKCH.
#define BM_DMA_TCDn_CSR_MAJORLINKCH (0x0F00U) //!< Bit mask for DMA_TCDn_CSR_MAJORLINKCH.
#define BS_DMA_TCDn_CSR_MAJORLINKCH (4U) //!< Bit field size in bits for DMA_TCDn_CSR_MAJORLINKCH.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_MAJORLINKCH field.
#define BR_DMA_TCDn_CSR_MAJORLINKCH(x, n) (HW_DMA_TCDn_CSR(x, n).B.MAJORLINKCH)
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_MAJORLINKCH.
#define BF_DMA_TCDn_CSR_MAJORLINKCH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_MAJORLINKCH), uint16_t) & BM_DMA_TCDn_CSR_MAJORLINKCH)
#ifndef __LANGUAGE_ASM__
//! @brief Set the MAJORLINKCH field to a new value.
#define BW_DMA_TCDn_CSR_MAJORLINKCH(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, (HW_DMA_TCDn_CSR_RD(x, n) & ~BM_DMA_TCDn_CSR_MAJORLINKCH) | BF_DMA_TCDn_CSR_MAJORLINKCH(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_CSR, field BWC[15:14] (RW)
*
* Throttles the amount of bus bandwidth consumed by the eDMA. In general, as
* the eDMA processes the minor loop, it continuously generates read/write
* sequences until the minor count is exhausted. This field forces the eDMA to stall
* after the completion of each read/write access to control the bus request
* bandwidth seen by the crossbar switch. If the source and destination sizes are equal,
* this field is ignored between the first and second transfers and after the
* last write of each minor loop. This behavior is a side effect of reducing
* start-up latency.
*
* Values:
* - 00 - No eDMA engine stalls
* - 01 - Reserved
* - 10 - eDMA engine stalls for 4 cycles after each r/w
* - 11 - eDMA engine stalls for 8 cycles after each r/w
*/
//@{
#define BP_DMA_TCDn_CSR_BWC (14U) //!< Bit position for DMA_TCDn_CSR_BWC.
#define BM_DMA_TCDn_CSR_BWC (0xC000U) //!< Bit mask for DMA_TCDn_CSR_BWC.
#define BS_DMA_TCDn_CSR_BWC (2U) //!< Bit field size in bits for DMA_TCDn_CSR_BWC.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_CSR_BWC field.
#define BR_DMA_TCDn_CSR_BWC(x, n) (HW_DMA_TCDn_CSR(x, n).B.BWC)
#endif
//! @brief Format value for bitfield DMA_TCDn_CSR_BWC.
#define BF_DMA_TCDn_CSR_BWC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_CSR_BWC), uint16_t) & BM_DMA_TCDn_CSR_BWC)
#ifndef __LANGUAGE_ASM__
//! @brief Set the BWC field to a new value.
#define BW_DMA_TCDn_CSR_BWC(x, n, v) (HW_DMA_TCDn_CSR_WR(x, n, (HW_DMA_TCDn_CSR_RD(x, n) & ~BM_DMA_TCDn_CSR_BWC) | BF_DMA_TCDn_CSR_BWC(v)))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled)
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_BITER_ELINKNO - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled) (RW)
*
* Reset value: 0x0000U
*
* If the TCDn_BITER[ELINK] bit is cleared, the TCDn_BITER register is defined
* as follows.
*/
typedef union _hw_dma_tcdn_biter_elinkno
{
uint16_t U;
struct _hw_dma_tcdn_biter_elinkno_bitfields
{
uint16_t BITER : 15; //!< [14:0] Starting Major Iteration Count
uint16_t ELINK : 1; //!< [15] Enables channel-to-channel linking on
//! minor loop complete
} B;
} hw_dma_tcdn_biter_elinkno_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_BITER_ELINKNO register
*/
//@{
#define HW_DMA_TCDn_BITER_ELINKNO_COUNT (16U)
#define HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n) (REGS_DMA_BASE(x) + 0x101EU + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_BITER_ELINKNO(x, n) (*(__IO hw_dma_tcdn_biter_elinkno_t *) HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n))
#define HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) (HW_DMA_TCDn_BITER_ELINKNO(x, n).U)
#define HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO(x, n).U = (v))
#define HW_DMA_TCDn_BITER_ELINKNO_SET(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) | (v)))
#define HW_DMA_TCDn_BITER_ELINKNO_CLR(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_BITER_ELINKNO_TOG(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_BITER_ELINKNO bitfields
*/
/*!
* @name Register DMA_TCDn_BITER_ELINKNO, field BITER[14:0] (RW)
*
* As the transfer control descriptor is first loaded by software, this 9-bit
* (ELINK = 1) or 15-bit (ELINK = 0) field must be equal to the value in the CITER
* field. As the major iteration count is exhausted, the contents of this field
* are reloaded into the CITER field. When the software loads the TCD, this field
* must be set equal to the corresponding CITER field; otherwise, a configuration
* error is reported. As the major iteration count is exhausted, the contents of
* this field is reloaded into the CITER field. If the channel is configured to
* execute a single service request, the initial values of BITER and CITER should
* be 0x0001.
*/
//@{
#define BP_DMA_TCDn_BITER_ELINKNO_BITER (0U) //!< Bit position for DMA_TCDn_BITER_ELINKNO_BITER.
#define BM_DMA_TCDn_BITER_ELINKNO_BITER (0x7FFFU) //!< Bit mask for DMA_TCDn_BITER_ELINKNO_BITER.
#define BS_DMA_TCDn_BITER_ELINKNO_BITER (15U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKNO_BITER.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_BITER_ELINKNO_BITER field.
#define BR_DMA_TCDn_BITER_ELINKNO_BITER(x, n) (HW_DMA_TCDn_BITER_ELINKNO(x, n).B.BITER)
#endif
//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKNO_BITER.
#define BF_DMA_TCDn_BITER_ELINKNO_BITER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKNO_BITER), uint16_t) & BM_DMA_TCDn_BITER_ELINKNO_BITER)
#ifndef __LANGUAGE_ASM__
//! @brief Set the BITER field to a new value.
#define BW_DMA_TCDn_BITER_ELINKNO_BITER(x, n, v) (HW_DMA_TCDn_BITER_ELINKNO_WR(x, n, (HW_DMA_TCDn_BITER_ELINKNO_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKNO_BITER) | BF_DMA_TCDn_BITER_ELINKNO_BITER(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_BITER_ELINKNO, field ELINK[15] (RW)
*
* As the channel completes the minor loop, this flag enables the linking to
* another channel, defined by BITER[LINKCH]. The link target channel initiates a
* channel service request via an internal mechanism that sets the TCDn_CSR[START]
* bit of the specified channel. If channel linking is disabled, the BITER value
* extends to 15 bits in place of a link channel number. If the major loop is
* exhausted, this link mechanism is suppressed in favor of the MAJORELINK channel
* linking. When the software loads the TCD, this field must be set equal to the
* corresponding CITER field; otherwise, a configuration error is reported. As the
* major iteration count is exhausted, the contents of this field is reloaded
* into the CITER field.
*
* Values:
* - 0 - The channel-to-channel linking is disabled
* - 1 - The channel-to-channel linking is enabled
*/
//@{
#define BP_DMA_TCDn_BITER_ELINKNO_ELINK (15U) //!< Bit position for DMA_TCDn_BITER_ELINKNO_ELINK.
#define BM_DMA_TCDn_BITER_ELINKNO_ELINK (0x8000U) //!< Bit mask for DMA_TCDn_BITER_ELINKNO_ELINK.
#define BS_DMA_TCDn_BITER_ELINKNO_ELINK (1U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKNO_ELINK.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_BITER_ELINKNO_ELINK field.
#define BR_DMA_TCDn_BITER_ELINKNO_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKNO_ELINK))
#endif
//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKNO_ELINK.
#define BF_DMA_TCDn_BITER_ELINKNO_ELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKNO_ELINK), uint16_t) & BM_DMA_TCDn_BITER_ELINKNO_ELINK)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ELINK field to a new value.
#define BW_DMA_TCDn_BITER_ELINKNO_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKNO_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKNO_ELINK) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled)
//-------------------------------------------------------------------------------------------
#ifndef __LANGUAGE_ASM__
/*!
* @brief HW_DMA_TCDn_BITER_ELINKYES - TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled) (RW)
*
* Reset value: 0x0000U
*
* If the TCDn_BITER[ELINK] bit is set, the TCDn_BITER register is defined as
* follows.
*/
typedef union _hw_dma_tcdn_biter_elinkyes
{
uint16_t U;
struct _hw_dma_tcdn_biter_elinkyes_bitfields
{
uint16_t BITER : 9; //!< [8:0] Starting Major Iteration Count
uint16_t LINKCH : 4; //!< [12:9] Link Channel Number
uint16_t RESERVED0 : 2; //!< [14:13]
uint16_t ELINK : 1; //!< [15] Enables channel-to-channel linking on
//! minor loop complete
} B;
} hw_dma_tcdn_biter_elinkyes_t;
#endif
/*!
* @name Constants and macros for entire DMA_TCDn_BITER_ELINKYES register
*/
//@{
#define HW_DMA_TCDn_BITER_ELINKYES_COUNT (16U)
#define HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n) (REGS_DMA_BASE(x) + 0x101EU + (0x20U * n))
#ifndef __LANGUAGE_ASM__
#define HW_DMA_TCDn_BITER_ELINKYES(x, n) (*(__IO hw_dma_tcdn_biter_elinkyes_t *) HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n))
#define HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).U)
#define HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES(x, n).U = (v))
#define HW_DMA_TCDn_BITER_ELINKYES_SET(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) | (v)))
#define HW_DMA_TCDn_BITER_ELINKYES_CLR(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~(v)))
#define HW_DMA_TCDn_BITER_ELINKYES_TOG(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) ^ (v)))
#endif
//@}
/*
* Constants & macros for individual DMA_TCDn_BITER_ELINKYES bitfields
*/
/*!
* @name Register DMA_TCDn_BITER_ELINKYES, field BITER[8:0] (RW)
*
* As the transfer control descriptor is first loaded by software, this 9-bit
* (ELINK = 1) or 15-bit (ELINK = 0) field must be equal to the value in the CITER
* field. As the major iteration count is exhausted, the contents of this field
* are reloaded into the CITER field. When the software loads the TCD, this field
* must be set equal to the corresponding CITER field; otherwise, a configuration
* error is reported. As the major iteration count is exhausted, the contents of
* this field is reloaded into the CITER field. If the channel is configured to
* execute a single service request, the initial values of BITER and CITER should
* be 0x0001.
*/
//@{
#define BP_DMA_TCDn_BITER_ELINKYES_BITER (0U) //!< Bit position for DMA_TCDn_BITER_ELINKYES_BITER.
#define BM_DMA_TCDn_BITER_ELINKYES_BITER (0x01FFU) //!< Bit mask for DMA_TCDn_BITER_ELINKYES_BITER.
#define BS_DMA_TCDn_BITER_ELINKYES_BITER (9U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_BITER.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_BITER field.
#define BR_DMA_TCDn_BITER_ELINKYES_BITER(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).B.BITER)
#endif
//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_BITER.
#define BF_DMA_TCDn_BITER_ELINKYES_BITER(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKYES_BITER), uint16_t) & BM_DMA_TCDn_BITER_ELINKYES_BITER)
#ifndef __LANGUAGE_ASM__
//! @brief Set the BITER field to a new value.
#define BW_DMA_TCDn_BITER_ELINKYES_BITER(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKYES_BITER) | BF_DMA_TCDn_BITER_ELINKYES_BITER(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_BITER_ELINKYES, field LINKCH[12:9] (RW)
*
* If channel-to-channel linking is enabled (ELINK = 1), then after the minor
* loop is exhausted, the eDMA engine initiates a channel service request at the
* channel defined by these four bits by setting that channel's TCDn_CSR[START]
* bit. When the software loads the TCD, this field must be set equal to the
* corresponding CITER field; otherwise, a configuration error is reported. As the major
* iteration count is exhausted, the contents of this field is reloaded into the
* CITER field.
*/
//@{
#define BP_DMA_TCDn_BITER_ELINKYES_LINKCH (9U) //!< Bit position for DMA_TCDn_BITER_ELINKYES_LINKCH.
#define BM_DMA_TCDn_BITER_ELINKYES_LINKCH (0x1E00U) //!< Bit mask for DMA_TCDn_BITER_ELINKYES_LINKCH.
#define BS_DMA_TCDn_BITER_ELINKYES_LINKCH (4U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_LINKCH.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_LINKCH field.
#define BR_DMA_TCDn_BITER_ELINKYES_LINKCH(x, n) (HW_DMA_TCDn_BITER_ELINKYES(x, n).B.LINKCH)
#endif
//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_LINKCH.
#define BF_DMA_TCDn_BITER_ELINKYES_LINKCH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKYES_LINKCH), uint16_t) & BM_DMA_TCDn_BITER_ELINKYES_LINKCH)
#ifndef __LANGUAGE_ASM__
//! @brief Set the LINKCH field to a new value.
#define BW_DMA_TCDn_BITER_ELINKYES_LINKCH(x, n, v) (HW_DMA_TCDn_BITER_ELINKYES_WR(x, n, (HW_DMA_TCDn_BITER_ELINKYES_RD(x, n) & ~BM_DMA_TCDn_BITER_ELINKYES_LINKCH) | BF_DMA_TCDn_BITER_ELINKYES_LINKCH(v)))
#endif
//@}
/*!
* @name Register DMA_TCDn_BITER_ELINKYES, field ELINK[15] (RW)
*
* As the channel completes the minor loop, this flag enables the linking to
* another channel, defined by BITER[LINKCH]. The link target channel initiates a
* channel service request via an internal mechanism that sets the TCDn_CSR[START]
* bit of the specified channel. If channel linking disables, the BITER value
* extends to 15 bits in place of a link channel number. If the major loop is
* exhausted, this link mechanism is suppressed in favor of the MAJORELINK channel
* linking. When the software loads the TCD, this field must be set equal to the
* corresponding CITER field; otherwise, a configuration error is reported. As the
* major iteration count is exhausted, the contents of this field is reloaded into
* the CITER field.
*
* Values:
* - 0 - The channel-to-channel linking is disabled
* - 1 - The channel-to-channel linking is enabled
*/
//@{
#define BP_DMA_TCDn_BITER_ELINKYES_ELINK (15U) //!< Bit position for DMA_TCDn_BITER_ELINKYES_ELINK.
#define BM_DMA_TCDn_BITER_ELINKYES_ELINK (0x8000U) //!< Bit mask for DMA_TCDn_BITER_ELINKYES_ELINK.
#define BS_DMA_TCDn_BITER_ELINKYES_ELINK (1U) //!< Bit field size in bits for DMA_TCDn_BITER_ELINKYES_ELINK.
#ifndef __LANGUAGE_ASM__
//! @brief Read current value of the DMA_TCDn_BITER_ELINKYES_ELINK field.
#define BR_DMA_TCDn_BITER_ELINKYES_ELINK(x, n) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKYES_ELINK))
#endif
//! @brief Format value for bitfield DMA_TCDn_BITER_ELINKYES_ELINK.
#define BF_DMA_TCDn_BITER_ELINKYES_ELINK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint16_t) << BP_DMA_TCDn_BITER_ELINKYES_ELINK), uint16_t) & BM_DMA_TCDn_BITER_ELINKYES_ELINK)
#ifndef __LANGUAGE_ASM__
//! @brief Set the ELINK field to a new value.
#define BW_DMA_TCDn_BITER_ELINKYES_ELINK(x, n, v) (BITBAND_ACCESS16(HW_DMA_TCDn_BITER_ELINKYES_ADDR(x, n), BP_DMA_TCDn_BITER_ELINKYES_ELINK) = (v))
#endif
//@}
//-------------------------------------------------------------------------------------------
// hw_dma_t - module struct
//-------------------------------------------------------------------------------------------
/*!
* @brief All DMA module registers.
*/
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_dma
{
__IO hw_dma_cr_t CR; //!< [0x0] Control Register
__I hw_dma_es_t ES; //!< [0x4] Error Status Register
uint8_t _reserved0[4];
__IO hw_dma_erq_t ERQ; //!< [0xC] Enable Request Register
uint8_t _reserved1[4];
__IO hw_dma_eei_t EEI; //!< [0x14] Enable Error Interrupt Register
__O hw_dma_ceei_t CEEI; //!< [0x18] Clear Enable Error Interrupt Register
__O hw_dma_seei_t SEEI; //!< [0x19] Set Enable Error Interrupt Register
__O hw_dma_cerq_t CERQ; //!< [0x1A] Clear Enable Request Register
__O hw_dma_serq_t SERQ; //!< [0x1B] Set Enable Request Register
__O hw_dma_cdne_t CDNE; //!< [0x1C] Clear DONE Status Bit Register
__O hw_dma_ssrt_t SSRT; //!< [0x1D] Set START Bit Register
__O hw_dma_cerr_t CERR; //!< [0x1E] Clear Error Register
__O hw_dma_cint_t CINT; //!< [0x1F] Clear Interrupt Request Register
uint8_t _reserved2[4];
__IO hw_dma_int_t INT; //!< [0x24] Interrupt Request Register
uint8_t _reserved3[4];
__IO hw_dma_err_t ERR; //!< [0x2C] Error Register
uint8_t _reserved4[4];
__I hw_dma_hrs_t HRS; //!< [0x34] Hardware Request Status Register
uint8_t _reserved5[200];
__IO hw_dma_dchprin_t DCHPRIn[16]; //!< [0x100] Channel n Priority Register
uint8_t _reserved6[3824];
struct {
__IO hw_dma_tcdn_saddr_t TCDn_SADDR; //!< [0x1000] TCD Source Address
__IO hw_dma_tcdn_soff_t TCDn_SOFF; //!< [0x1004] TCD Signed Source Address Offset
__IO hw_dma_tcdn_attr_t TCDn_ATTR; //!< [0x1006] TCD Transfer Attributes
union {
__IO hw_dma_tcdn_nbytes_mlno_t TCDn_NBYTES_MLNO; //!< [0x1008] TCD Minor Byte Count (Minor Loop Disabled)
__IO hw_dma_tcdn_nbytes_mloffno_t TCDn_NBYTES_MLOFFNO; //!< [0x1008] TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled)
__IO hw_dma_tcdn_nbytes_mloffyes_t TCDn_NBYTES_MLOFFYES; //!< [0x1008] TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled)
};
__IO hw_dma_tcdn_slast_t TCDn_SLAST; //!< [0x100C] TCD Last Source Address Adjustment
__IO hw_dma_tcdn_daddr_t TCDn_DADDR; //!< [0x1010] TCD Destination Address
__IO hw_dma_tcdn_doff_t TCDn_DOFF; //!< [0x1014] TCD Signed Destination Address Offset
union {
__IO hw_dma_tcdn_citer_elinkno_t TCDn_CITER_ELINKNO; //!< [0x1016] TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled)
__IO hw_dma_tcdn_citer_elinkyes_t TCDn_CITER_ELINKYES; //!< [0x1016] TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled)
};
__IO hw_dma_tcdn_dlastsga_t TCDn_DLASTSGA; //!< [0x1018] TCD Last Destination Address Adjustment/Scatter Gather Address
__IO hw_dma_tcdn_csr_t TCDn_CSR; //!< [0x101C] TCD Control and Status
union {
__IO hw_dma_tcdn_biter_elinkno_t TCDn_BITER_ELINKNO; //!< [0x101E] TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled)
__IO hw_dma_tcdn_biter_elinkyes_t TCDn_BITER_ELINKYES; //!< [0x101E] TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled)
};
} TCD[16];
} hw_dma_t;
#pragma pack()
//! @brief Macro to access all DMA registers.
//! @param x DMA instance number.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//! use the '&' operator, like <code>&HW_DMA(0)</code>.
#define HW_DMA(x) (*(hw_dma_t *) REGS_DMA_BASE(x))
#endif
#endif // __HW_DMA_REGISTERS_H__
// v22/130726/0.9
// EOF