Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_ARCH_MAX/stm32f4xx_hal_dma2d.h
- Revision:
- 118:16969dd821af
- Parent:
- 92:4fc01daae5a5
--- a/TARGET_ARCH_MAX/stm32f4xx_hal_dma2d.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,504 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_dma2d.h
- * @author MCD Application Team
- * @version V1.1.0
- * @date 19-June-2014
- * @brief Header file of DMA2D HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_DMA2D_H
-#define __STM32F4xx_HAL_DMA2D_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup DMA2D
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-
-#define MAX_DMA2D_LAYER 2
-
-/**
- * @brief DMA2D color Structure definition
- */
-typedef struct
-{
- uint32_t Blue; /*!< Configures the blue value.
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
-
- uint32_t Green; /*!< Configures the green value.
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
-
- uint32_t Red; /*!< Configures the red value.
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
-} DMA2D_ColorTypeDef;
-
-/**
- * @brief DMA2D CLUT Structure definition
- */
-typedef struct
-{
- uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/
-
- uint32_t CLUTColorMode; /*!< configures the DMA2D CLUT color mode.
- This parameter can be one value of @ref DMA2D_CLUT_CM */
-
- uint32_t Size; /*!< configures the DMA2D CLUT size.
- This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
-} DMA2D_CLUTCfgTypeDef;
-
-/**
- * @brief DMA2D Init structure definition
- */
-typedef struct
-{
- uint32_t Mode; /*!< configures the DMA2D transfer mode.
- This parameter can be one value of @ref DMA2D_Mode */
-
- uint32_t ColorMode; /*!< configures the color format of the output image.
- This parameter can be one value of @ref DMA2D_Color_Mode */
-
- uint32_t OutputOffset; /*!< Specifies the Offset value.
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
-} DMA2D_InitTypeDef;
-
-/**
- * @brief DMA2D Layer structure definition
- */
-typedef struct
-{
- uint32_t InputOffset; /*!< configures the DMA2D foreground offset.
- This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
-
- uint32_t InputColorMode; /*!< configures the DMA2D foreground color mode .
- This parameter can be one value of @ref DMA2D_Input_Color_Mode */
-
- uint32_t AlphaMode; /*!< configures the DMA2D foreground alpha mode.
- This parameter can be one value of @ref DMA2D_ALPHA_MODE */
-
- uint32_t InputAlpha; /*!< Specifies the DMA2D foreground alpha value and color value in case of A8 or A4 color mode.
- This parameter must be a number between Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF
- in case of A8 or A4 color mode (ARGB).
- Otherwise, This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
-
-} DMA2D_LayerCfgTypeDef;
-
-/**
- * @brief HAL DMA2D State structures definition
- */
-typedef enum
-{
- HAL_DMA2D_STATE_RESET = 0x00, /*!< DMA2D not yet initialized or disabled */
- HAL_DMA2D_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_DMA2D_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_DMA2D_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_DMA2D_STATE_ERROR = 0x04, /*!< DMA2D state error */
- HAL_DMA2D_STATE_SUSPEND = 0x05 /*!< DMA2D process is suspended */
-}HAL_DMA2D_StateTypeDef;
-
-/**
- * @brief DMA2D handle Structure definition
- */
-typedef struct __DMA2D_HandleTypeDef
-{
- DMA2D_TypeDef *Instance; /*!< DMA2D Register base address */
-
- DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters */
-
- void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback */
-
- void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback */
-
- DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
-
- HAL_LockTypeDef Lock; /*!< DMA2D Lock */
-
- __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state */
-
- __IO uint32_t ErrorCode; /*!< DMA2D Error code */
-} DMA2D_HandleTypeDef;
-
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup DMA2D_Exported_Constants
- * @{
- */
-
-/** @defgroup DMA2D_Layer
- * @{
- */
-#define IS_DMA2D_LAYER(LAYER) ((LAYER) <= MAX_DMA2D_LAYER)
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Error_Code
- * @{
- */
-#define HAL_DMA2D_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
-#define HAL_DMA2D_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
-#define HAL_DMA2D_ERROR_CE ((uint32_t)0x00000002) /*!< Configuration error */
-#define HAL_DMA2D_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Mode
- * @{
- */
-#define DMA2D_M2M ((uint32_t)0x00000000) /*!< DMA2D memory to memory transfer mode */
-#define DMA2D_M2M_PFC ((uint32_t)0x00010000) /*!< DMA2D memory to memory with pixel format conversion transfer mode */
-#define DMA2D_M2M_BLEND ((uint32_t)0x00020000) /*!< DMA2D memory to memory with blending transfer mode */
-#define DMA2D_R2M ((uint32_t)0x00030000) /*!< DMA2D register to memory transfer mode */
-
-#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
- ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Color_Mode
- * @{
- */
-#define DMA2D_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D color mode */
-#define DMA2D_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D color mode */
-#define DMA2D_RGB565 ((uint32_t)0x00000002) /*!< RGB565 DMA2D color mode */
-#define DMA2D_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 DMA2D color mode */
-#define DMA2D_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 DMA2D color mode */
-
-#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \
- ((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \
- ((MODE_ARGB) == DMA2D_ARGB4444))
-/**
- * @}
- */
-
-/** @defgroup DMA2D_COLOR_VALUE
- * @{
- */
-
-#define COLOR_VALUE ((uint32_t)0x000000FF) /*!< color value mask */
-
-#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= COLOR_VALUE)
-/**
- * @}
- */
-
-/** @defgroup DMA2D_SIZE
- * @{
- */
-#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16) /*!< DMA2D pixel per line */
-#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of line */
-
-#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
-#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Offset
- * @{
- */
-#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */
-
-#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Input_Color_Mode
- * @{
- */
-#define CM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 color mode */
-#define CM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 color mode */
-#define CM_RGB565 ((uint32_t)0x00000002) /*!< RGB565 color mode */
-#define CM_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 color mode */
-#define CM_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 color mode */
-#define CM_L8 ((uint32_t)0x00000005) /*!< L8 color mode */
-#define CM_AL44 ((uint32_t)0x00000006) /*!< AL44 color mode */
-#define CM_AL88 ((uint32_t)0x00000007) /*!< AL88 color mode */
-#define CM_L4 ((uint32_t)0x00000008) /*!< L4 color mode */
-#define CM_A8 ((uint32_t)0x00000009) /*!< A8 color mode */
-#define CM_A4 ((uint32_t)0x0000000A) /*!< A4 color mode */
-
-#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888) || \
- ((INPUT_CM) == CM_RGB565) || ((INPUT_CM) == CM_ARGB1555) || \
- ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8) || \
- ((INPUT_CM) == CM_AL44) || ((INPUT_CM) == CM_AL88) || \
- ((INPUT_CM) == CM_L4) || ((INPUT_CM) == CM_A8) || \
- ((INPUT_CM) == CM_A4))
-/**
- * @}
- */
-
-/** @defgroup DMA2D_ALPHA_MODE
- * @{
- */
-#define DMA2D_NO_MODIF_ALPHA ((uint32_t)0x00000000) /*!< No modification of the alpha channel value */
-#define DMA2D_REPLACE_ALPHA ((uint32_t)0x00000001) /*!< Replace original alpha channel value by programmed alpha value */
-#define DMA2D_COMBINE_ALPHA ((uint32_t)0x00000002) /*!< Replace original alpha channel value by programmed alpha value
- with original alpha channel value */
-
-#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
- ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
- ((AlphaMode) == DMA2D_COMBINE_ALPHA))
-/**
- * @}
- */
-
-/** @defgroup DMA2D_CLUT_CM
- * @{
- */
-#define DMA2D_CCM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D C-LUT color mode */
-#define DMA2D_CCM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D C-LUT color mode */
-
-#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Size_Clut
- * @{
- */
-#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8) /*!< DMA2D C-LUT size */
-
-#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
-/**
- * @}
- */
-
-/** @defgroup DMA2D_DeadTime
- * @{
- */
-#define LINE_WATERMARK DMA2D_LWR_LW
-
-#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Interrupts
- * @{
- */
-#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
-#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< C-LUT Transfer Complete Interrupt */
-#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< C-LUT Access Error Interrupt */
-#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
-#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
-#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
-
-#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
- ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
- ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Flag
- * @{
- */
-#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
-#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< C-LUT Transfer Complete Interrupt Flag */
-#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< C-LUT Access Error Interrupt Flag */
-#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
-#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
-#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
-
-#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
- ((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
- ((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
-/**
- * @}
- */
-
-/**
- * @}
- */
-/* Exported macro ------------------------------------------------------------*/
-
-/** @brief Reset DMA2D handle state
- * @param __HANDLE__: specifies the DMA2D handle.
- * @retval None
- */
-#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
-
-/**
- * @brief Enable the DMA2D.
- * @param __HANDLE__: DMA2D handle
- * @retval None.
- */
-#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
-
-/**
- * @brief Disable the DMA2D.
- * @param __HANDLE__: DMA2D handle
- * @retval None.
- */
-#define __HAL_DMA2D_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START)
-
-/* Interrupt & Flag management */
-/**
- * @brief Get the DMA2D pending flags.
- * @param __HANDLE__: DMA2D handle
- * @param __FLAG__: Get the specified flag.
- * This parameter can be any combination of the following values:
- * @arg DMA2D_FLAG_CE: Configuration error flag
- * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
- * @arg DMA2D_FLAG_CAE: C-LUT access error flag
- * @arg DMA2D_FLAG_TW: Transfer Watermark flag
- * @arg DMA2D_FLAG_TC: Transfer complete flag
- * @arg DMA2D_FLAG_TE: Transfer error flag
- * @retval The state of FLAG.
- */
-#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
-
-/**
- * @brief Clears the DMA2D pending flags.
- * @param __HANDLE__: DMA2D handle
- * @param __FLAG__: specifies the flag to clear.
- * This parameter can be any combination of the following values:
- * @arg DMA2D_FLAG_CE: Configuration error flag
- * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
- * @arg DMA2D_FLAG_CAE: C-LUT access error flag
- * @arg DMA2D_FLAG_TW: Transfer Watermark flag
- * @arg DMA2D_FLAG_TC: Transfer complete flag
- * @arg DMA2D_FLAG_TE: Transfer error flag
- * @retval None
- */
-#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
-
-/**
- * @brief Enables the specified DMA2D interrupts.
- * @param __HANDLE__: DMA2D handle
- * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled.
- * This parameter can be any combination of the following values:
- * @arg DMA2D_IT_CE: Configuration error interrupt mask
- * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
- * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
- * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
- * @arg DMA2D_IT_TC: Transfer complete interrupt mask
- * @arg DMA2D_IT_TE: Transfer error interrupt mask
- * @retval None
- */
-#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-
-/**
- * @brief Disables the specified DMA2D interrupts.
- * @param __HANDLE__: DMA2D handle
- * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled.
- * This parameter can be any combination of the following values:
- * @arg DMA2D_IT_CE: Configuration error interrupt mask
- * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
- * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
- * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
- * @arg DMA2D_IT_TC: Transfer complete interrupt mask
- * @arg DMA2D_IT_TE: Transfer error interrupt mask
- * @retval None
- */
-#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-
-/**
- * @brief Checks whether the specified DMA2D interrupt has occurred or not.
- * @param __HANDLE__: DMA2D handle
- * @param __INTERRUPT__: specifies the DMA2D interrupt source to check.
- * This parameter can be one of the following values:
- * @arg DMA2D_IT_CE: Configuration error interrupt mask
- * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
- * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
- * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
- * @arg DMA2D_IT_TC: Transfer complete interrupt mask
- * @arg DMA2D_IT_TE: Transfer error interrupt mask
- * @retval The state of INTERRUPT.
- */
-#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
-
-/* Exported functions --------------------------------------------------------*/
-
-/* Initialization and de-initialization functions *******************************/
-HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
-HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
-void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
-void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
-
-/* IO operation functions *******************************************************/
-HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
-HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
-HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
-HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
-HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
-HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
-HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
-HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
-void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
-
-/* Peripheral Control functions *************************************************/
-HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
-HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
-HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
-HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
-HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
-
-/* Peripheral State functions ***************************************************/
-HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
-uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F4xx_HAL_DMA2D_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/