Mike Pulice
Integrating the ublox LISA C200 modem
Fork of
SprintUSBModemHTTPClientTest
by 
Donatien Garnier
Diff: ublox_C200Test.uvproj
- Revision:
- 6:404683315230
- Parent:
- 5:3f93dd1d4cb3
--- a/ublox_C200Test.uvproj Thu Sep 26 00:44:20 2013 -0500
+++ b/ublox_C200Test.uvproj Thu Sep 26 00:51:06 2013 -0500
@@ -3,7 +3,7 @@
<SchemaVersion>1.1</SchemaVersion>
- <Header>###This file was automagically generated by mbed.org. For more information, see http://mbed.org/handbook/Exporting-To-Uvision </Header>
+ <Header>### uVision Project, (C) Keil Software</Header>
<Targets>
<Target>
@@ -29,6 +29,7 @@
<SLE66CMisc></SLE66CMisc>
<SLE66AMisc></SLE66AMisc>
<SLE66LinkerMisc></SLE66LinkerMisc>
+ <SFDFile></SFDFile>
<UseEnv>0</UseEnv>
<BinPath></BinPath>
<IncludePath></IncludePath>
@@ -135,6 +136,7 @@
<RestoreMemoryDisplay>1</RestoreMemoryDisplay>
<RestoreFunctions>0</RestoreFunctions>
<RestoreToolbox>1</RestoreToolbox>
+ <RestoreTracepoints>0</RestoreTracepoints>
</Target>
<RunDebugAfterBuild>0</RunDebugAfterBuild>
<TargetSelection>14</TargetSelection>
@@ -163,6 +165,7 @@
<Capability>1</Capability>
<DriverSelection>4105</DriverSelection>
</Flash1>
+ <bUseTDR>0</bUseTDR>
<Flash2>BIN\CMSIS_AGDI.dll</Flash2>
<Flash3>"" ()</Flash3>
<Flash4></Flash4>
@@ -348,7 +351,7 @@
<MiscControls>--gnu</MiscControls>
<Define> TARGET_LPC1768, TARGET_M3, TARGET_NXP, TARGET_LPC176X, TOOLCHAIN_ARM_STD, TOOLCHAIN_ARM, __CORTEX_M3, ARM_MATH_CM3, </Define>
<Undefine></Undefine>
- <IncludePath> .; mbed-rtos; mbed-rtos/rtx; mbed-rtos/rtx/TARGET_M3; mbed-rtos/rtx/TARGET_M3/TOOLCHAIN_ARM; mbed-rtos/rtos; HTTPClient; HTTPClient/data; SprintUSBModem; SprintUSBModem/sms; SprintUSBModem/serial; SprintUSBModem/serial/usb; SprintUSBModem/serial/io; SprintUSBModem/Socket; SprintUSBModem/at; SprintUSBModem/lwip; SprintUSBModem/lwip/netif; SprintUSBModem/lwip/netif/ppp; SprintUSBModem/lwip/api; SprintUSBModem/lwip/core; SprintUSBModem/lwip/core/snmp; SprintUSBModem/lwip/core/ipv4; SprintUSBModem/lwip/include; SprintUSBModem/lwip/include/netif; SprintUSBModem/lwip/include/lwip; SprintUSBModem/lwip/include/ipv4; SprintUSBModem/lwip/include/ipv4/lwip; SprintUSBModem/lwip-sys; SprintUSBModem/lwip-sys/arch; SprintUSBModem/ip; SprintUSBModem/USBHostWANDongleSprint; SprintUSBModem/USBHostWANDongleSprint/USB3GModule; SprintUSBModem/USBHostWANDongleSprint/USBHost; SprintUSBModem/core; SprintUSBModem/socket; SprintUSBModem/socket/netinet; SprintUSBModem/socket/sys; mbed-src; mbed-src/hal; mbed-src/api; mbed-src/targets; mbed-src/targets/hal; mbed-src/targets/hal/TARGET_NXP; mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X; mbed-src/targets/cmsis; mbed-src/targets/cmsis/TARGET_NXP; mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X; mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_ARM_STD; mbed-src/common; </IncludePath>
+ <IncludePath> .; mbed-rtos; mbed-rtos/rtx; mbed-rtos/rtx/TARGET_M3; mbed-rtos/rtx/TARGET_M3/TOOLCHAIN_ARM; mbed-rtos/rtos; HTTPClient; HTTPClient/data; SprintUSBModem; SprintUSBModem/sms; SprintUSBModem/serial; SprintUSBModem/serial/usb; SprintUSBModem/serial/io; SprintUSBModem/Socket; SprintUSBModem/at; SprintUSBModem/lwip; SprintUSBModem/lwip/netif; SprintUSBModem/lwip/netif/ppp; SprintUSBModem/lwip/api; SprintUSBModem/lwip/core; SprintUSBModem/lwip/core/snmp; SprintUSBModem/lwip/core/ipv4; SprintUSBModem/lwip/include; SprintUSBModem/lwip/include/netif; SprintUSBModem/lwip/include/lwip; SprintUSBModem/lwip/include/ipv4; SprintUSBModem/lwip/include/ipv4/lwip; SprintUSBModem/lwip-sys; SprintUSBModem/lwip-sys/arch; SprintUSBModem/ip; SprintUSBModem/USBHostWANDongleSprint; SprintUSBModem/USBHostWANDongleSprint/USB3GModule; SprintUSBModem/USBHostWANDongleSprint/USBHost; SprintUSBModem/core; SprintUSBModem/socket; SprintUSBModem/socket/netinet; SprintUSBModem/socket/sys; mbed-src; mbed-src/hal; mbed-src/api; mbed-src/targets; mbed-src/targets/hal; mbed-src/targets/hal/TARGET_NXP; mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X; mbed-src/targets/cmsis; mbed-src/targets/cmsis/TARGET_NXP; mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X; mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_ARM_STD; mbed-src/common</IncludePath>
</VariousControls>
</Cads>
<Aads>
@@ -383,8 +386,7 @@
- </Misc>
- <LinkerInputFile></LinkerInputFile>
+ </Misc><LinkerInputFile></LinkerInputFile>
<DisabledWarnings></DisabledWarnings>
</LDads>
</TargetArmAds>
@@ -393,1987 +395,4476 @@
<Group>
<GroupName>src</GroupName>
<Files>
-
- <File>
- <FileName>SVC_Table.s</FileName>
- <FileType>2</FileType>
- <FilePath>mbed-rtos/rtx/TARGET_M3/TOOLCHAIN_ARM/SVC_Table.s</FilePath>
-
- </File>
-
- <File>
- <FileName>startup_LPC17xx.s</FileName>
- <FileType>2</FileType>
- <FilePath>mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_ARM_STD/startup_LPC17xx.s</FilePath>
-
- </File>
-
- <File>
- <FileName>rt_Task.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_Task.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_System.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_System.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_List.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_List.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_Time.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_Time.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_Semaphore.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_Semaphore.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_Mailbox.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_Mailbox.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_CMSIS.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_CMSIS.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>HAL_CM.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/HAL_CM.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_Robin.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_Robin.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_MemBox.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_MemBox.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>RTX_Conf_CM.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/RTX_Conf_CM.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_Event.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_Event.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rt_Mutex.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/rt_Mutex.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>HAL_CM3.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-rtos/rtx/TARGET_M3/TOOLCHAIN_ARM/HAL_CM3.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>slipif.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/slipif.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>etharp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/etharp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>ethernetif.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ethernetif.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>ppp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/ppp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>vj.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/vj.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>fsm.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/fsm.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>randm.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/randm.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>lcp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/lcp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>auth.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/auth.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>ppp_oe.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/ppp_oe.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>pap.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/pap.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>ipcp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/ipcp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>md5.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/md5.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>magic.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/magic.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>chap.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/chap.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>chpms.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/netif/ppp/chpms.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>api_msg.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/api/api_msg.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>netbuf.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/api/netbuf.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>netifapi.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/api/netifapi.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>api_lib.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/api/api_lib.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>tcpip.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/api/tcpip.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>err.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/api/err.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>netdb.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/api/netdb.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>sockets.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/api/sockets.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>tcp_in.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/tcp_in.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>netif.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/netif.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>memp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/memp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>dns.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/dns.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>pbuf.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/pbuf.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>dhcp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/dhcp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>raw.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/raw.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>stats.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/stats.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>mem.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/mem.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>udp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/udp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>tcp_out.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/tcp_out.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>timers.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/timers.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>init.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/init.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>tcp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/tcp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>def.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/def.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>msg_in.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/snmp/msg_in.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>msg_out.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/snmp/msg_out.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>asn1_dec.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/snmp/asn1_dec.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>mib_structs.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/snmp/mib_structs.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>asn1_enc.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/snmp/asn1_enc.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>mib2.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/snmp/mib2.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>autoip.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/ipv4/autoip.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>inet_chksum.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/ipv4/inet_chksum.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>ip.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/ipv4/ip.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>icmp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/ipv4/icmp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>inet.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/ipv4/inet.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>ip_addr.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/ipv4/ip_addr.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>ip_frag.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/ipv4/ip_frag.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>igmp.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip/core/ipv4/igmp.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>sys_arch.c</FileName>
- <FileType>1</FileType>
- <FilePath>SprintUSBModem/lwip-sys/arch/sys_arch.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>port_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/port_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>spi_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/spi_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>analogout_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/analogout_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>analogin_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/analogin_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>gpio_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/gpio_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rtc_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/rtc_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>gpio_irq_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/gpio_irq_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>serial_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/serial_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>i2c_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/i2c_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>pwmout_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/pwmout_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>ethernet_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/ethernet_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>sleep.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/sleep.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>pinmap.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/pinmap.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>us_ticker.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/us_ticker.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>can_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/can_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>cmsis_nvic.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/cmsis_nvic.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>system_LPC17xx.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/system_LPC17xx.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>board.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/common/board.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>mbed_interface.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/common/mbed_interface.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>exit.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/common/exit.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>rtc_time.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/common/rtc_time.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>us_ticker_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/common/us_ticker_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>pinmap_common.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/common/pinmap_common.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>semihost_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/common/semihost_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>wait_api.c</FileName>
- <FileType>1</FileType>
- <FilePath>mbed-src/common/wait_api.c</FilePath>
-
- <FileOption>
- <FileArmAds>
- <Cads>
- <VariousControls>
- <MiscControls>--c99</MiscControls>
- </VariousControls>
- </Cads>
- </FileArmAds>
- </FileOption>
-
- </File>
-
- <File>
- <FileName>main.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>main.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Thread.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-rtos/rtos/Thread.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>RtosTimer.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-rtos/rtos/RtosTimer.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Semaphore.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-rtos/rtos/Semaphore.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Mutex.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-rtos/rtos/Mutex.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>HTTPClient.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>HTTPClient/HTTPClient.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>HTTPText.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>HTTPClient/data/HTTPText.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>HTTPMap.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>HTTPClient/data/HTTPMap.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>SprintUSBModem.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/SprintUSBModem.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>SMSInterface.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/sms/SMSInterface.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>USBSerialStream.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/serial/usb/USBSerialStream.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>IOSerialStream.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/serial/io/IOSerialStream.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>UDPSocket.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/Socket/UDPSocket.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Endpoint.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/Socket/Endpoint.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>TCPSocketServer.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/Socket/TCPSocketServer.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>TCPSocketConnection.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/Socket/TCPSocketConnection.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Socket.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/Socket/Socket.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>ATCommandsInterface.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/at/ATCommandsInterface.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>LwIPInterface.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/ip/LwIPInterface.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>PPPIPInterface.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/ip/PPPIPInterface.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>IPInterface.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/ip/IPInterface.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>WANDongleSerialPort.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/USBHostWANDongleSprint/USB3GModule/WANDongleSerialPort.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>WANDongle.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/USBHostWANDongleSprint/USB3GModule/WANDongle.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>WANDongleInitializer.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/USBHostWANDongleSprint/USB3GModule/WANDongleInitializer.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>USBHost.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/USBHostWANDongleSprint/USBHost/USBHost.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>USBHALHost.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/USBHostWANDongleSprint/USBHost/USBHALHost.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>USBDeviceConnected.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/USBHostWANDongleSprint/USBHost/USBDeviceConnected.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>USBEndpoint.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/USBHostWANDongleSprint/USBHost/USBEndpoint.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>dbg.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>SprintUSBModem/core/dbg.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>sys.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_ARM_STD/sys.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Ticker.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/Ticker.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>FilePath.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/FilePath.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>I2C.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/I2C.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>FileBase.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/FileBase.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>retarget.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/retarget.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Serial.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/Serial.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Stream.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/Stream.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>FileSystemLike.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/FileSystemLike.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>CallChain.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/CallChain.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>InterruptManager.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/InterruptManager.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>BusInOut.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/BusInOut.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>SPISlave.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/SPISlave.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>I2CSlave.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/I2CSlave.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>FunctionPointer.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/FunctionPointer.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Timer.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/Timer.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>SPI.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/SPI.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Timeout.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/Timeout.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>Ethernet.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/Ethernet.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>TimerEvent.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/TimerEvent.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>CAN.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/CAN.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>BusOut.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/BusOut.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>FileLike.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/FileLike.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>BusIn.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/BusIn.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>InterruptIn.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/InterruptIn.cpp</FilePath>
-
- </File>
-
- <File>
- <FileName>LocalFileSystem.cpp</FileName>
- <FileType>8</FileType>
- <FilePath>mbed-src/common/LocalFileSystem.cpp</FilePath>
-
- </File>
-
+ <File>
+ <FileName>SVC_Table.s</FileName>
+ <FileType>2</FileType>
+ <FilePath>mbed-rtos/rtx/TARGET_M3/TOOLCHAIN_ARM/SVC_Table.s</FilePath>
+ </File>
+ <File>
+ <FileName>startup_LPC17xx.s</FileName>
+ <FileType>2</FileType>
+ <FilePath>mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_ARM_STD/startup_LPC17xx.s</FilePath>
+ </File>
+ <File>
+ <FileName>rt_Task.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_Task.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_System.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_System.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_List.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_List.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_Time.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_Time.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_Semaphore.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_Semaphore.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_Mailbox.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_Mailbox.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_CMSIS.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_CMSIS.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>HAL_CM.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/HAL_CM.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_Robin.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_Robin.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_MemBox.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_MemBox.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>RTX_Conf_CM.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/RTX_Conf_CM.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_Event.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_Event.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rt_Mutex.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/rt_Mutex.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>HAL_CM3.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-rtos/rtx/TARGET_M3/TOOLCHAIN_ARM/HAL_CM3.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>slipif.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/slipif.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>etharp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/etharp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>ethernetif.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ethernetif.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>ppp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/ppp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>vj.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/vj.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>fsm.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/fsm.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>randm.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/randm.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>lcp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/lcp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>auth.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/auth.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>ppp_oe.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/ppp_oe.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>pap.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/pap.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>ipcp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/ipcp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>md5.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/md5.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>magic.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/magic.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>chap.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/chap.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>chpms.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/netif/ppp/chpms.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>api_msg.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/api/api_msg.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>netbuf.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/api/netbuf.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>netifapi.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/api/netifapi.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>api_lib.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/api/api_lib.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>tcpip.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/api/tcpip.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>err.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/api/err.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>netdb.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/api/netdb.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>sockets.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/api/sockets.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>tcp_in.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/tcp_in.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>netif.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/netif.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>memp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/memp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>dns.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/dns.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>pbuf.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/pbuf.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>dhcp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/dhcp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>raw.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/raw.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>stats.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/stats.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>mem.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/mem.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>udp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/udp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>tcp_out.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/tcp_out.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>timers.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/timers.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>init.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/init.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>tcp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/tcp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>def.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/def.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>msg_in.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/snmp/msg_in.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>msg_out.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/snmp/msg_out.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>asn1_dec.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/snmp/asn1_dec.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>mib_structs.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/snmp/mib_structs.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>asn1_enc.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/snmp/asn1_enc.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>mib2.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/snmp/mib2.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>autoip.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/ipv4/autoip.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>inet_chksum.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/ipv4/inet_chksum.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>ip.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/ipv4/ip.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>icmp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/ipv4/icmp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>inet.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/ipv4/inet.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>ip_addr.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/ipv4/ip_addr.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>ip_frag.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/ipv4/ip_frag.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>igmp.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip/core/ipv4/igmp.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>sys_arch.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>SprintUSBModem/lwip-sys/arch/sys_arch.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>port_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/port_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>spi_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/spi_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>analogout_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/analogout_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>analogin_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/analogin_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>gpio_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/gpio_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rtc_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/rtc_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>gpio_irq_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/gpio_irq_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>serial_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/serial_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>i2c_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/i2c_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>pwmout_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/pwmout_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>ethernet_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/ethernet_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>sleep.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/sleep.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>pinmap.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/pinmap.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>us_ticker.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/us_ticker.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>can_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/hal/TARGET_NXP/TARGET_LPC176X/can_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>cmsis_nvic.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/cmsis_nvic.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>system_LPC17xx.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/system_LPC17xx.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>board.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/common/board.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>mbed_interface.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/common/mbed_interface.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>exit.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/common/exit.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>rtc_time.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/common/rtc_time.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>us_ticker_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/common/us_ticker_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>pinmap_common.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/common/pinmap_common.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>semihost_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/common/semihost_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>wait_api.c</FileName>
+ <FileType>1</FileType>
+ <FilePath>mbed-src/common/wait_api.c</FilePath>
+ <FileOption>
+ <CommonProperty>
+ <UseCPPCompiler>2</UseCPPCompiler>
+ <RVCTCodeConst>0</RVCTCodeConst>
+ <RVCTZI>0</RVCTZI>
+ <RVCTOtherData>0</RVCTOtherData>
+ <ModuleSelection>0</ModuleSelection>
+ <IncludeInBuild>1</IncludeInBuild>
+ <AlwaysBuild>0</AlwaysBuild>
+ <GenerateAssemblyFile>0</GenerateAssemblyFile>
+ <AssembleAssemblyFile>0</AssembleAssemblyFile>
+ <PublicsOnly>0</PublicsOnly>
+ <StopOnExitCode>3</StopOnExitCode>
+ <CustomArgument></CustomArgument>
+ <IncludeLibraryModules></IncludeLibraryModules>
+ </CommonProperty>
+ <FileArmAds>
+ <Cads>
+ <interw>2</interw>
+ <Optim>0</Optim>
+ <oTime>2</oTime>
+ <SplitLS>2</SplitLS>
+ <OneElfS>2</OneElfS>
+ <Strict>2</Strict>
+ <EnumInt>2</EnumInt>
+ <PlainCh>2</PlainCh>
+ <Ropi>2</Ropi>
+ <Rwpi>2</Rwpi>
+ <wLevel>0</wLevel>
+ <uThumb>2</uThumb>
+ <uSurpInc>2</uSurpInc>
+ <VariousControls>
+ <MiscControls>--c99</MiscControls>
+ <Define></Define>
+ <Undefine></Undefine>
+ <IncludePath></IncludePath>
+ </VariousControls>
+ </Cads>
+ </FileArmAds>
+ </FileOption>
+ </File>
+ <File>
+ <FileName>main.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>main.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Thread.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-rtos/rtos/Thread.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>RtosTimer.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-rtos/rtos/RtosTimer.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Semaphore.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-rtos/rtos/Semaphore.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Mutex.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-rtos/rtos/Mutex.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>HTTPClient.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>HTTPClient/HTTPClient.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>HTTPText.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>HTTPClient/data/HTTPText.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>HTTPMap.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>HTTPClient/data/HTTPMap.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>SprintUSBModem.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/SprintUSBModem.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>SMSInterface.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/sms/SMSInterface.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>USBSerialStream.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/serial/usb/USBSerialStream.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>IOSerialStream.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/serial/io/IOSerialStream.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>UDPSocket.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/Socket/UDPSocket.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Endpoint.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/Socket/Endpoint.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>TCPSocketServer.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/Socket/TCPSocketServer.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>TCPSocketConnection.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/Socket/TCPSocketConnection.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Socket.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/Socket/Socket.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>ATCommandsInterface.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/at/ATCommandsInterface.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>LwIPInterface.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/ip/LwIPInterface.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>PPPIPInterface.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/ip/PPPIPInterface.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>IPInterface.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/ip/IPInterface.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>WANDongleSerialPort.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/USBHostWANDongleSprint/USB3GModule/WANDongleSerialPort.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>WANDongle.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/USBHostWANDongleSprint/USB3GModule/WANDongle.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>WANDongleInitializer.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/USBHostWANDongleSprint/USB3GModule/WANDongleInitializer.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>USBHost.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/USBHostWANDongleSprint/USBHost/USBHost.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>USBHALHost.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/USBHostWANDongleSprint/USBHost/USBHALHost.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>USBDeviceConnected.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/USBHostWANDongleSprint/USBHost/USBDeviceConnected.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>USBEndpoint.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/USBHostWANDongleSprint/USBHost/USBEndpoint.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>dbg.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>SprintUSBModem/core/dbg.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>sys.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/targets/cmsis/TARGET_NXP/TARGET_LPC176X/TOOLCHAIN_ARM_STD/sys.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Ticker.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/Ticker.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FilePath.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/FilePath.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>I2C.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/I2C.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FileBase.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/FileBase.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>retarget.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/retarget.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Serial.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/Serial.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Stream.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/Stream.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FileSystemLike.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/FileSystemLike.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>CallChain.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/CallChain.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>InterruptManager.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/InterruptManager.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>BusInOut.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/BusInOut.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>SPISlave.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/SPISlave.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>I2CSlave.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/I2CSlave.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FunctionPointer.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/FunctionPointer.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Timer.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/Timer.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>SPI.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/SPI.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Timeout.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/Timeout.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>Ethernet.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/Ethernet.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>TimerEvent.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/TimerEvent.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>CAN.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/CAN.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>BusOut.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/BusOut.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>FileLike.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/FileLike.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>BusIn.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/BusIn.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>InterruptIn.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/InterruptIn.cpp</FilePath>
+ </File>
+ <File>
+ <FileName>LocalFileSystem.cpp</FileName>
+ <FileType>8</FileType>
+ <FilePath>mbed-src/common/LocalFileSystem.cpp</FilePath>
+ </File>
</Files>
</Group>
</Groups>
Repository toolbox
| Export to desktop IDE |
| Build repository |
Repository details
| Type: | Program |
|---|---|
| Created: | 24 Sep 2013 |
| Imports: | 6 |
| Forks: | 0 |
| Commits: | 22 |
| Dependents: | 0 |
| Dependencies: | 0 |
| Followers: | 4 |
This repository is Public (Unlisted).
The code in this repository is Apache licensed.