Fork of mbed-src file paths change. LPC1114FN28 use only.

Fork of mbed-src by mbed official

Information

この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。

・使う物
LPC1114FN28
mbed SDK

LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28) /media/uploads/minicube/mbed_lpc1114_sdk.png

パスが通ってないだけのようなのでファイルを以下に移動する。

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある

TOOLCHAIN_ARM_MICRO

をフォルダごと

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\hal\TARGET_NXP\

へ移動

移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。

/media/uploads/minicube/mbed_lpc1114_sdk_tree.png


ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。

Import librarymbed-src-LPC1114FN28

Fork of mbed-src file paths change. LPC1114FN28 use only.


エラーが出力される場合

"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。

Error: Undefined symbol _initial_sp (referred from entry2.o).
Error: Undefined symbol _heap_base (referred from malloc.o).
Error: Undefined symbol _heap_limit (referred from malloc.o).

LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。

targets/hal/TARGET_NXP/pinmap.c

Committer:
minicube
Date:
2013-10-27
Revision:
43:b3acfef78949
Parent:
targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/pinmap.c@ 30:91c1d09ada54

File content as of revision 43:b3acfef78949:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "pinmap.h"
#include "error.h"

void pin_function(PinName pin, int function) {
    if (pin == (uint32_t)NC) return;
    
    uint32_t offset = (uint32_t)pin & 0xff;
    __IO uint32_t *reg = (__IO uint32_t*)(LPC_IOCON_BASE + offset);

    // pin function bits: [2:0] -> 111 = (0x7)
    *reg = (*reg & ~0x7) | (function & 0x7);
}

void pin_mode(PinName pin, PinMode mode) {
    if (pin == (uint32_t)NC) { return; }
    
    uint32_t offset = (uint32_t)pin & 0xff;
    uint32_t drain = ((uint32_t) mode & (uint32_t) OpenDrain) >> 2;
    
    __IO uint32_t *reg = (__IO uint32_t*)(LPC_IOCON_BASE + offset);
    uint32_t tmp = *reg;
    
    // pin mode bits: [4:3] -> 11000 = (0x3 << 3)
    tmp &= ~(0x3 << 3);
    tmp |= (mode & 0x3) << 3;
    
    // drain
    tmp &= ~(0x1 << 10);
    tmp |= drain << 10;
    
    *reg = tmp;
}