Diff: targets/hal/TARGET_Freescale/TARGET_KL46Z/i2c_api.c

Revision:

43:b3acfef78949

Parent:

42:7ca0bbba899b

--- a/targets/hal/TARGET_Freescale/TARGET_KL46Z/i2c_api.c	Sun Oct 27 16:30:04 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,423 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "i2c_api.h"
-
-#include "cmsis.h"
-#include "pinmap.h"
-#include "error.h"
-
-static const PinMap PinMap_I2C_SDA[] = {
-    {PTE25, I2C_0, 5},
-    {PTC9,  I2C_0, 2},
-    {PTE0,  I2C_1, 6},
-    {PTB1,  I2C_0, 2},
-    {PTB3,  I2C_0, 2},
-    {PTC11, I2C_1, 2},
-    {PTC2,  I2C_1, 2},
-    {PTA4,  I2C_1, 2},
-    {NC  ,  NC   , 0}
-};
-
-static const PinMap PinMap_I2C_SCL[] = {
-    {PTE24, I2C_0, 5},
-    {PTC8,  I2C_0, 2},
-    {PTE1,  I2C_1, 6},
-    {PTB0,  I2C_0, 2},
-    {PTB2,  I2C_0, 2},
-    {PTC10, I2C_1, 2},
-    {PTC1,  I2C_1, 2},
-    {NC  ,  NC,    0}
-};
-
-static const uint16_t ICR[0x40] = {
-      20,   22,   24,   26,   28,
-      30,   34,   40,   28,   32,
-      36,   40,   44,   48,   56,
-      68,   48,   56,   64,   72,
-      80,   88,  104,  128,   80,
-      96,  112,  128,  144,  160,
-      192,  240,  160,  192,  224,
-      256,  288,  320,  384,  480,
-      320,  384,  448,  512,  576,
-      640,  768,  960,  640,  768,
-      896, 1024, 1152, 1280, 1536,
-      1920, 1280, 1536, 1792, 2048,
-      2304, 2560, 3072, 3840
-};
-
-static uint8_t first_read;
-
-
-void i2c_init(i2c_t *obj, PinName sda, PinName scl) {
-    // determine the I2C to use
-    I2CName i2c_sda = (I2CName)pinmap_peripheral(sda, PinMap_I2C_SDA);
-    I2CName i2c_scl = (I2CName)pinmap_peripheral(scl, PinMap_I2C_SCL);
-    obj->i2c = (I2C_Type*)pinmap_merge(i2c_sda, i2c_scl);
-    if ((int)obj->i2c == NC) {
-        error("I2C pin mapping failed");
-    }
-
-    // enable power
-    switch ((int)obj->i2c) {
-        case I2C_0: SIM->SCGC5 |= 1 << 13; SIM->SCGC4 |= 1 << 6; break;
-        case I2C_1: SIM->SCGC5 |= 1 << 11; SIM->SCGC4 |= 1 << 7; break;
-    }
-
-    // set default frequency at 100k
-    i2c_frequency(obj, 100000);
-
-    // enable I2C interface
-    obj->i2c->C1 |= 0x80;
-
-    pinmap_pinout(sda, PinMap_I2C_SDA);
-    pinmap_pinout(scl, PinMap_I2C_SCL);
-    
-    first_read = 1;
-}
-
-int i2c_start(i2c_t *obj) {
-    uint8_t temp;
-    volatile int i;
-    // if we are in the middle of a transaction
-    // activate the repeat_start flag
-    if (obj->i2c->S & I2C_S_BUSY_MASK) {
-        // KL25Z errata sheet: repeat start cannot be generated if the
-        // I2Cx_F[MULT] field is set to a non-zero value
-        temp = obj->i2c->F >> 6;
-        obj->i2c->F &= 0x3F;
-        obj->i2c->C1 |= 0x04;
-        for (i = 0; i < 100; i ++) __NOP();
-        obj->i2c->F |= temp << 6;
-    } else {
-        obj->i2c->C1 |= I2C_C1_MST_MASK;
-        obj->i2c->C1 |= I2C_C1_TX_MASK;
-    }
-    first_read = 1;
-    return 0;
-}
-
-int i2c_stop(i2c_t *obj) {
-    volatile uint32_t n = 0;
-    obj->i2c->C1 &= ~I2C_C1_MST_MASK;
-    obj->i2c->C1 &= ~I2C_C1_TX_MASK;
-
-    // It seems that there are timing problems
-    // when there is no waiting time after a STOP.
-    // This wait is also included on the samples
-    // code provided with the freedom board
-    for (n = 0; n < 100; n++) __NOP();
-    first_read = 1;
-    return 0;
-}
-
-static int timeout_status_poll(i2c_t *obj, uint32_t mask) {
-    uint32_t i, timeout = 1000;
-    
-    for (i = 0; i < timeout; i++) {
-        if (obj->i2c->S & mask)
-            return 0;
-    }
-    
-    return 1;
-}
-
-// this function waits the end of a tx transfer and return the status of the transaction:
-//    0: OK ack received
-//    1: OK ack not received
-//    2: failure
-static int i2c_wait_end_tx_transfer(i2c_t *obj) {
-    
-    // wait for the interrupt flag
-    if (timeout_status_poll(obj, I2C_S_IICIF_MASK)) {
-        return 2;
-    }
-    
-    obj->i2c->S |= I2C_S_IICIF_MASK;
-    
-    // wait transfer complete
-    if (timeout_status_poll(obj, I2C_S_TCF_MASK)) {
-        return 2;
-    }
-
-    // check if we received the ACK or not
-    return obj->i2c->S & I2C_S_RXAK_MASK ? 1 : 0;
-}
-
-// this function waits the end of a rx transfer and return the status of the transaction:
-//    0: OK
-//    1: failure
-static int i2c_wait_end_rx_transfer(i2c_t *obj) {
-    // wait for the end of the rx transfer
-    if (timeout_status_poll(obj, I2C_S_IICIF_MASK)) {
-        return 1;
-    }
-    
-    obj->i2c->S |= I2C_S_IICIF_MASK;
-    
-    return 0;
-}
-
-static void i2c_send_nack(i2c_t *obj) {
-    obj->i2c->C1 |= I2C_C1_TXAK_MASK; // NACK
-}
-
-static void i2c_send_ack(i2c_t *obj) {
-    obj->i2c->C1 &= ~I2C_C1_TXAK_MASK; // ACK
-}
-
-static int i2c_do_write(i2c_t *obj, int value) {
-    // write the data
-    obj->i2c->D = value;
-
-    // init and wait the end of the transfer
-    return i2c_wait_end_tx_transfer(obj);
-}
-
-static int i2c_do_read(i2c_t *obj, char * data, int last) {
-    if (last)
-        i2c_send_nack(obj);
-    else
-        i2c_send_ack(obj);
-
-    *data = (obj->i2c->D & 0xFF);
-
-    // start rx transfer and wait the end of the transfer
-    return i2c_wait_end_rx_transfer(obj);
-}
-
-void i2c_frequency(i2c_t *obj, int hz) {
-    uint8_t icr = 0;
-    uint8_t mult = 0;
-    uint32_t error = 0;
-    uint32_t p_error = 0xffffffff;
-    uint32_t ref = 0;
-    uint8_t i, j;
-    // bus clk
-    uint32_t PCLK = 24000000u;
-    uint32_t pulse = PCLK / (hz * 2);
-
-    // we look for the values that minimize the error
-
-    // test all the MULT values
-    for (i = 1; i < 5; i*=2) {
-        for (j = 0; j < 0x40; j++) {
-            ref = PCLK / (i*ICR[j]);
-            if (ref > (uint32_t)hz)
-                continue;
-            error = hz - ref;
-            if (error < p_error) {
-                icr = j;
-                mult = i/2;
-                p_error = error;
-            }
-        }
-    }
-    pulse = icr | (mult << 6);
-
-    // I2C Rate
-    obj->i2c->F = pulse;
-}
-
-int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) {
-    int count;
-    char dummy_read, *ptr;
-
-    if (i2c_start(obj)) {
-        i2c_stop(obj);
-        return I2C_ERROR_BUS_BUSY;
-    }
-
-    if (i2c_do_write(obj, (address | 0x01))) {
-        i2c_stop(obj);
-        return I2C_ERROR_NO_SLAVE;
-    }
-
-    // set rx mode
-    obj->i2c->C1 &= ~I2C_C1_TX_MASK;
-
-    // Read in bytes
-    for (count = 0; count < (length); count++) {
-        ptr = (count == 0) ? &dummy_read : &data[count - 1];
-        uint8_t stop_ = (count == (length - 1)) ? 1 : 0;
-        if (i2c_do_read(obj, ptr, stop_)) {
-            i2c_stop(obj);
-            return count;
-        }
-    }
-
-    // If not repeated start, send stop.
-    if (stop) {
-        i2c_stop(obj);
-    }
-
-    // last read
-    data[count-1] = obj->i2c->D;
-
-    return length;
-}
-int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) {
-    int i;
-
-    if (i2c_start(obj)) {
-        i2c_stop(obj);
-        return I2C_ERROR_BUS_BUSY;
-    }
-
-    if (i2c_do_write(obj, (address & 0xFE))) {
-        i2c_stop(obj);
-        return I2C_ERROR_NO_SLAVE;
-    }
-
-    for (i = 0; i < length; i++) {
-        if(i2c_do_write(obj, data[i])) {
-            i2c_stop(obj);
-            return i;
-        }
-    }
-
-    if (stop) {
-        i2c_stop(obj);
-    }
-
-    return length;
-}
-
-void i2c_reset(i2c_t *obj) {
-    i2c_stop(obj);
-}
-
-int i2c_byte_read(i2c_t *obj, int last) {
-    char data;
-    
-    // set rx mode
-    obj->i2c->C1 &= ~I2C_C1_TX_MASK;
-    
-    if(first_read) {
-        // first dummy read
-        i2c_do_read(obj, &data, 0);
-        first_read = 0;
-    }
-    
-    if (last) {
-        // set tx mode
-        obj->i2c->C1 |= I2C_C1_TX_MASK;
-        return obj->i2c->D;
-    }
-        
-    i2c_do_read(obj, &data, last);
-    
-    return data;
-}
-
-int i2c_byte_write(i2c_t *obj, int data) {
-    first_read = 1;
-    
-    // set tx mode
-    obj->i2c->C1 |= I2C_C1_TX_MASK;
-    
-    return !i2c_do_write(obj, (data & 0xFF));
-}
-
-
-#if DEVICE_I2CSLAVE
-void i2c_slave_mode(i2c_t *obj, int enable_slave) {
-    if (enable_slave) {
-        // set slave mode
-        obj->i2c->C1 &= ~I2C_C1_MST_MASK;
-        obj->i2c->C1 |= I2C_C1_IICIE_MASK;
-    } else {
-        // set master mode
-        obj->i2c->C1 |= I2C_C1_MST_MASK;
-    }
-}
-
-int i2c_slave_receive(i2c_t *obj) {
-    switch(obj->i2c->S) {
-        // read addressed
-        case 0xE6: return 1;
-        
-        // write addressed
-        case 0xE2: return 3;
-        
-        default: return 0;
-    }
-}
-
-int i2c_slave_read(i2c_t *obj, char *data, int length) {
-    uint8_t dummy_read;
-    uint8_t * ptr;
-    int count;
-    
-    // set rx mode
-    obj->i2c->C1 &= ~I2C_C1_TX_MASK;
-    
-    // first dummy read
-    dummy_read = obj->i2c->D;
-    if(i2c_wait_end_rx_transfer(obj)) {
-        return 0;
-    }
-    
-    // read address
-    dummy_read = obj->i2c->D;
-    if(i2c_wait_end_rx_transfer(obj)) {
-        return 0;
-    }
-    
-    // read (length - 1) bytes
-    for (count = 0; count < (length - 1); count++) {
-        data[count] = obj->i2c->D;
-        if(i2c_wait_end_rx_transfer(obj)) {
-            return count;
-        }
-    }
-
-    // read last byte
-    ptr = (length == 0) ? &dummy_read : (uint8_t *)&data[count];
-    *ptr = obj->i2c->D;
-    
-    return (length) ? (count + 1) : 0;
-}
-
-int i2c_slave_write(i2c_t *obj, const char *data, int length) {
-    int i, count = 0;
-    
-    // set tx mode
-    obj->i2c->C1 |= I2C_C1_TX_MASK;
-    
-    for (i = 0; i < length; i++) {
-        if(i2c_do_write(obj, data[count++]) == 2) {
-            return i;
-        }
-    }
-    
-    // set rx mode
-    obj->i2c->C1 &= ~I2C_C1_TX_MASK;
-    
-    // dummy rx transfer needed
-    // otherwise the master cannot generate a stop bit
-    obj->i2c->D;
-    if(i2c_wait_end_rx_transfer(obj) == 2) {
-        return count;
-    }
-    
-    return count;
-}
-
-void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) {
-    obj->i2c->A1 = address & 0xfe;
-}
-#endif
-