minicube.net .
Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of
mbed-src
by 
mbed official
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。（2013/10/28）
パスが通ってないだけのようなのでファイルを以下に移動する。
| mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
| TOOLCHAIN_ARM_MICRO |
をフォルダごと
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
| mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
 |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
Last commit 27 Oct 2013 by 
minicube.net .
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
| Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/hal/TARGET_Freescale/TARGET_KL05Z/PinNames.h
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/hal/TARGET_Freescale/TARGET_KL05Z/PinNames.h Sun Oct 27 16:30:04 2013 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,129 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-/* PCR - 0x1000 */
-#define PORT_SHIFT 12
-
-typedef enum {
- PTA0 = 0x0,
- PTA1 = 0x4,
- PTA2 = 0x8,
- PTA3 = 0xc,
- PTA4 = 0x10,
- PTA5 = 0x14,
- PTA6 = 0x18,
- PTA7 = 0x1c,
- PTA8 = 0x20,
- PTA9 = 0x24,
- PTA10 = 0x28,
- PTA11 = 0x2c,
- PTA12 = 0x30,
- PTA13 = 0x34,
- PTA14 = 0x38,
- PTA15 = 0x3c,
- PTA16 = 0x40,
- PTA17 = 0x44,
- PTA18 = 0x48,
- PTA19 = 0x4c,
- PTB0 = 0x1000,
- PTB1 = 0x1004,
- PTB2 = 0x1008,
- PTB3 = 0x100c,
- PTB4 = 0x1010,
- PTB5 = 0x1014,
- PTB6 = 0x1018,
- PTB7 = 0x101c,
- PTB8 = 0x1020,
- PTB9 = 0x1024,
- PTB10 = 0x1028,
- PTB11 = 0x102c,
- PTB12 = 0x1030,
- PTB13 = 0x1034,
- PTB14 = 0x1038,
- PTB15 = 0x103c,
- PTB16 = 0x1040,
- PTB17 = 0x1044,
- PTB18 = 0x1048,
- PTB19 = 0x104c,
- PTB20 = 0x1050,
-
- LED_RED = PTB8,
- LED_GREEN = PTB9,
- LED_BLUE = PTB10,
-
- // mbed original LED naming
- LED1 = LED_BLUE,
- LED2 = LED_GREEN,
- LED3 = LED_RED,
- LED4 = LED_RED,
-
- // USB Pins
- USBTX = PTB1,
- USBRX = PTB2,
-
- // Arduino Headers
- D0 = PTB2,
- D1 = PTB1,
- D2 = PTA11,
- D3 = PTB5,
- D4 = PTA10,
- D5 = PTA12,
- D6 = PTB6,
- D7 = PTB7,
- D8 = PTA10,
- D9 = PTB11,
- D10 = PTA5,
- D11 = PTA7,
- D12 = PTA6,
- D13 = PTB0,
- D14 = PTB4,
- D15 = PTB3,
-
- A0 = PTB8,
- A1 = PTB9,
- A2 = PTA8,
- A3 = PTA0,
- A4 = PTA9,
- A5 = PTB13,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-/* PullDown not available for KL05 */
-typedef enum {
- PullNone = 0,
- PullUp = 2,
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif