minicube.net .
Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of
mbed-src
by 
mbed official
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。（2013/10/28）
パスが通ってないだけのようなのでファイルを以下に移動する。
| mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
| TOOLCHAIN_ARM_MICRO |
をフォルダごと
| mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
| mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
| mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
 |
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
Last commit 27 Oct 2013 by 
minicube.net .
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
| Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC812/TOOLCHAIN_ARM_MICRO/startup_LPC8xx.s
- Revision:
- 43:b3acfef78949
- Parent:
- 42:7ca0bbba899b
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC812/TOOLCHAIN_ARM_MICRO/startup_LPC8xx.s Sun Oct 27 16:30:04 2013 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,211 +0,0 @@ -;/***************************************************************************** -; * @file: startup_LPC8xx.s -; * @purpose: CMSIS Cortex-M0+ Core Device Startup File -; * for the NXP LPC8xx Device Series -; * @version: V1.0 -; * @date: 16. Aug. 2012 -; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------ -; * -; * Copyright (C) 2012 ARM Limited. All rights reserved. -; * ARM Limited (ARM) is supplying this software for use with Cortex-M0+ -; * processor based microcontrollers. This file can be freely distributed -; * within development tools that are supporting such ARM based processors. -; * -; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED -; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF -; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. -; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR -; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. -; * -; *****************************************************************************/ - - -; <h> Stack Configuration -; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Stack_Size EQU 0x00000200 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 - EXPORT __initial_sp - -Stack_Mem SPACE Stack_Size -__initial_sp EQU 0x10001000 - - -; <h> Heap Configuration -; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; </h> - -Heap_Size EQU 0x00000000 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 - EXPORT __heap_base - EXPORT __heap_limit - -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - - AREA RESET, DATA, READONLY - EXPORT __Vectors - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD SPI0_IRQHandler ; SPI0 controller - DCD SPI1_IRQHandler ; SPI1 controller - DCD 0 ; Reserved - DCD UART0_IRQHandler ; UART0 - DCD UART1_IRQHandler ; UART1 - DCD UART2_IRQHandler ; UART2 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD I2C_IRQHandler ; I2C controller - DCD SCT_IRQHandler ; Smart Counter Timer - DCD MRT_IRQHandler ; Multi-Rate Timer - DCD CMP_IRQHandler ; Comparator - DCD WDT_IRQHandler ; PIO1 (0:11) - DCD BOD_IRQHandler ; Brown Out Detect - DCD 0 ; Reserved - DCD WKT_IRQHandler ; Wakeup timer - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD PININT0_IRQHandler ; PIO INT0 - DCD PININT1_IRQHandler ; PIO INT1 - DCD PININT2_IRQHandler ; PIO INT2 - DCD PININT3_IRQHandler ; PIO INT3 - DCD PININT4_IRQHandler ; PIO INT4 - DCD PININT5_IRQHandler ; PIO INT5 - DCD PININT6_IRQHandler ; PIO INT6 - DCD PININT7_IRQHandler ; PIO INT7 - - - IF :LNOT::DEF:NO_CRP - AREA |.ARM.__at_0x02FC|, CODE, READONLY -CRP_Key DCD 0xFFFFFFFF - ENDIF - - - AREA |.text|, CODE, READONLY - - -; Reset Handler - -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT SystemInit - IMPORT __main - LDR R0, =SystemInit - BLX R0 - LDR R0, =__main - BX R0 - ENDP - - -; Dummy Exception Handlers (infinite loops which can be modified) -; now, under COMMON lpc8xx_nmi.c and lpc8xx_nmi.h, a real NMI handler is created if NMI is enabled -; for particular peripheral. -;NMI_Handler PROC -; EXPORT NMI_Handler [WEAK] -; B . -; ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT NMI_Handler [WEAK] - EXPORT SPI0_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT UART0_IRQHandler [WEAK] - EXPORT UART1_IRQHandler [WEAK] - EXPORT UART2_IRQHandler [WEAK] - EXPORT I2C_IRQHandler [WEAK] - EXPORT SCT_IRQHandler [WEAK] - EXPORT MRT_IRQHandler [WEAK] - EXPORT CMP_IRQHandler [WEAK] - EXPORT WDT_IRQHandler [WEAK] - EXPORT BOD_IRQHandler [WEAK] - - EXPORT WKT_IRQHandler [WEAK] - - EXPORT PININT0_IRQHandler [WEAK] - EXPORT PININT1_IRQHandler [WEAK] - EXPORT PININT2_IRQHandler [WEAK] - EXPORT PININT3_IRQHandler [WEAK] - EXPORT PININT4_IRQHandler [WEAK] - EXPORT PININT5_IRQHandler [WEAK] - EXPORT PININT6_IRQHandler [WEAK] - EXPORT PININT7_IRQHandler [WEAK] - -NMI_Handler -SPI0_IRQHandler -SPI1_IRQHandler -UART0_IRQHandler -UART1_IRQHandler -UART2_IRQHandler -I2C_IRQHandler -SCT_IRQHandler -MRT_IRQHandler -CMP_IRQHandler -WDT_IRQHandler -BOD_IRQHandler -WKT_IRQHandler -PININT0_IRQHandler -PININT1_IRQHandler -PININT2_IRQHandler -PININT3_IRQHandler -PININT4_IRQHandler -PININT5_IRQHandler -PININT6_IRQHandler -PININT7_IRQHandler - - B . - - ENDP - - ALIGN - END