minicube.net . / mbed-src-LPC1114FN28

Fork of mbed-src file paths change. LPC1114FN28 use only.

Fork of mbed-src by mbed official

Information

この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。

・使う物
LPC1114FN28
mbed SDK

LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。（2013/10/28） /media/uploads/minicube/mbed_lpc1114_sdk.png

パスが通ってないだけのようなのでファイルを以下に移動する。

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある

TOOLCHAIN_ARM_MICRO

をフォルダごと

mbed-src\targets\cmsis\TARGET_NXP\

へ移動

mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\

にあるファイルをすべて

mbed-src\targets\hal\TARGET_NXP\

へ移動

移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。

/media/uploads/minicube/mbed_lpc1114_sdk_tree.png


ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。

Import librarymbed-src-LPC1114FN28

Fork of mbed-src file paths change. LPC1114FN28 use only.

Last commit 27 Oct 2013 by minicube.net .


エラーが出力される場合

"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。

Error: Undefined symbol _initial_sp (referred from entry2.o).
Error: Undefined symbol _heap_base (referred from malloc.o).
Error: Undefined symbol _heap_limit (referred from malloc.o).

LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。

Diff: targets/cmsis/TARGET_NXP/TARGET_LPC43XX/TOOLCHAIN_ARM_STD/startup_LPC43xx.s

Revision:
43:b3acfef78949
Parent:
42:7ca0bbba899b
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC43XX/TOOLCHAIN_ARM_STD/startup_LPC43xx.s	Sun Oct 27 16:30:04 2013 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,291 +0,0 @@
-;/***********************************************************************
-; * @brief: LPC18xx/43xx M3/M4 startup code
-; *
-; * @note
-; * Copyright(C) NXP Semiconductors, 2012
-; * All rights reserved.
-; *
-; * @par
-; * Software that is described herein is for illustrative purposes only
-; * which provides customers with programming information regarding the
-; * LPC products.  This software is supplied "AS IS" without any warranties of
-; * any kind, and NXP Semiconductors and its licensor disclaim any and
-; * all warranties, express or implied, including all implied warranties of
-; * merchantability, fitness for a particular purpose and non-infringement of
-; * intellectual property rights.  NXP Semiconductors assumes no responsibility
-; * or liability for the use of the software, conveys no license or rights under any
-; * patent, copyright, mask work right, or any other intellectual property rights in
-; * or to any products. NXP Semiconductors reserves the right to make changes
-; * in the software without notification. NXP Semiconductors also makes no
-; * representation or warranty that such application will be suitable for the
-; * specified use without further testing or modification.
-; *
-; * @par
-; * Permission to use, copy, modify, and distribute this software and its
-; * documentation is hereby granted, under NXP Semiconductors' and its
-; * licensor's relevant copyrights in the software, without fee, provided that it
-; * is used in conjunction with NXP Semiconductors microcontrollers.  This
-; * copyright, permission, and disclaimer notice must appear in all copies of
-; * this code.
-; */
-
-__initial_sp    EQU     0x10020000  ; Top of first RAM segment for LPC43XX
-
-                PRESERVE8
-                THUMB
-
-; Vector Table Mapped to Address 0 at Reset
-
-                AREA    RESET, DATA, READONLY
-                EXPORT  __Vectors
-
-Sign_Value		EQU		0x5A5A5A5A
-
-__Vectors       DCD     __initial_sp              	; 0 Top of Stack
-                DCD     Reset_Handler             	; 1 Reset Handler
-                DCD     NMI_Handler               	; 2 NMI Handler
-                DCD     HardFault_Handler         	; 3 Hard Fault Handler
-                DCD     MemManage_Handler         	; 4 MPU Fault Handler
-                DCD     BusFault_Handler          	; 5 Bus Fault Handler
-                DCD     UsageFault_Handler        	; 6 Usage Fault Handler
-                DCD     Sign_Value                	; 7 Reserved
-                DCD     UnHandled_Vector           	; 8 Reserved
-                DCD     UnHandled_Vector           	; 9 Reserved
-                DCD     UnHandled_Vector          	; 10 Reserved
-                DCD     SVC_Handler               	; 11 SVCall Handler
-                DCD     DebugMon_Handler          	; 12 Debug Monitor Handler
-                DCD     UnHandled_Vector          	; 13 Reserved
-                DCD     PendSV_Handler            	; 14 PendSV Handler
-                DCD     SysTick_Handler           	; 15 SysTick Handler
-
-                ; External Interrupts
-				DCD		DAC_IRQHandler	 			; 16 D/A Converter
-				DCD		MX_CORE_IRQHandler			; 17 M0/M4 IRQ handler (LPC43XX ONLY)
-				DCD		DMA_IRQHandler				; 18 General Purpose DMA
-				DCD		UnHandled_Vector			; 19 Reserved
-				DCD		FLASHEEPROM_IRQHandler		; 20 ORed flash bank A, flash bank B, EEPROM interrupts
-				DCD		ETH_IRQHandler				; 21 Ethernet
-				DCD		SDIO_IRQHandler				; 22 SD/MMC
-				DCD		LCD_IRQHandler				; 23 LCD
-				DCD		USB0_IRQHandler				; 24 USB0
-				DCD		USB1_IRQHandler				; 25 USB1
-				DCD		SCT_IRQHandler				; 26 State Configurable Timer
-				DCD		RIT_IRQHandler				; 27 Repetitive Interrupt Timer
-				DCD		TIMER0_IRQHandler			; 28 Timer0
-				DCD		TIMER1_IRQHandler			; 29 Timer1
-				DCD		TIMER2_IRQHandler			; 30 Timer2
-				DCD		TIMER3_IRQHandler			; 31 Timer3
-				DCD		MCPWM_IRQHandler			; 32 Motor Control PWM
-				DCD		ADC0_IRQHandler				; 33 A/D Converter 0
-				DCD		I2C0_IRQHandler				; 34 I2C0
-				DCD		I2C1_IRQHandler				; 35 I2C1
-				DCD		SPI_IRQHandler				; 36 SPI (LPC43XX ONLY)
-				DCD		ADC1_IRQHandler				; 37 A/D Converter 1
-				DCD		SSP0_IRQHandler				; 38 SSP0
-				DCD		SSP1_IRQHandler				; 39 SSP1
-				DCD		UART0_IRQHandler			; 40 UART0
-				DCD		UART1_IRQHandler			; 41 UART1
-				DCD		UART2_IRQHandler			; 42 UART2
-				DCD		UART3_IRQHandler			; 43 UART3
-				DCD		I2S0_IRQHandler				; 44 I2S0
-				DCD		I2S1_IRQHandler				; 45 I2S1
-				DCD		SPIFI_IRQHandler			; 46 SPI Flash Interface
-				DCD		SGPIO_IRQHandler			; 47 SGPIO (LPC43XX ONLY)
-				DCD		GPIO0_IRQHandler			; 48 GPIO0
-				DCD		GPIO1_IRQHandler			; 49 GPIO1
-				DCD		GPIO2_IRQHandler			; 50 GPIO2
-				DCD		GPIO3_IRQHandler			; 51 GPIO3
-				DCD		GPIO4_IRQHandler			; 52 GPIO4
-				DCD		GPIO5_IRQHandler			; 53 GPIO5
-				DCD		GPIO6_IRQHandler			; 54 GPIO6
-				DCD		GPIO7_IRQHandler			; 55 GPIO7
-				DCD		GINT0_IRQHandler			; 56 GINT0
-				DCD		GINT1_IRQHandler			; 57 GINT1
-				DCD		EVRT_IRQHandler				; 58 Event Router
-				DCD		CAN1_IRQHandler				; 59 C_CAN1
- 				DCD		UnHandled_Vector			; 60 Reserved
-				DCD		VADC_IRQHandler 			; 61 VADC
-				DCD		ATIMER_IRQHandler			; 62 ATIMER
-				DCD		RTC_IRQHandler				; 63 RTC
- 				DCD		UnHandled_Vector			; 64 Reserved
-				DCD		WDT_IRQHandler				; 65 WDT
-				DCD		UnHandled_Vector			; 66 M0s
-				DCD		CAN0_IRQHandler				; 67 C_CAN0
-				DCD 	QEI_IRQHandler				; 68 QEI
-
-
-;                IF      :LNOT::DEF:NO_CRP
-;                AREA    |.ARM.__at_0x02FC|, CODE, READONLY
-;CRP_Key         DCD     0xFFFFFFFF
-;                ENDIF
-
-                AREA    |.text|, CODE, READONLY
-
-; Reset Handler
-
-Reset_Handler   PROC
-                EXPORT  Reset_Handler             [WEAK]
-                IMPORT  __main
-				IMPORT  SystemInit
-				LDR		R0, =SystemInit
-				BLX		R0
-                LDR     R0, =__main
-                BX      R0
-                ENDP
-
-; Dummy Exception Handlers (infinite loops which can be modified)
-
-NMI_Handler     PROC
-                EXPORT  NMI_Handler               [WEAK]
-                B       .
-                ENDP
-HardFault_Handler\
-                PROC
-                EXPORT  HardFault_Handler         [WEAK]
-                B       .
-                ENDP
-MemManage_Handler\
-                PROC
-                EXPORT  MemManage_Handler         [WEAK]
-                B       .
-                ENDP
-BusFault_Handler\
-                PROC
-                EXPORT  BusFault_Handler          [WEAK]
-                B       .
-                ENDP
-UsageFault_Handler\
-                PROC
-                EXPORT  UsageFault_Handler        [WEAK]
-                B       .
-                ENDP
-SVC_Handler     PROC
-                EXPORT  SVC_Handler               [WEAK]
-                B       .
-                ENDP
-DebugMon_Handler\
-                PROC
-                EXPORT  DebugMon_Handler          [WEAK]
-                B       .
-                ENDP
-PendSV_Handler  PROC
-                EXPORT  PendSV_Handler            [WEAK]
-                B       .
-                ENDP
-SysTick_Handler PROC
-                EXPORT  SysTick_Handler           [WEAK]
-                B       .
-                ENDP
-UnHandled_Vector	PROC
-                EXPORT  UnHandled_Vector          [WEAK]
-                B       .
-                ENDP
-
-Default_Handler PROC
-
-                EXPORT DAC_IRQHandler 	    	[WEAK]
-                EXPORT MX_CORE_IRQHandler	    [WEAK]
-				EXPORT DMA_IRQHandler		    [WEAK]
-                EXPORT FLASHEEPROM_IRQHandler	[WEAK]
-				EXPORT ETH_IRQHandler	    	[WEAK]
-				EXPORT SDIO_IRQHandler	    	[WEAK]
-				EXPORT LCD_IRQHandler	    	[WEAK]
-				EXPORT USB0_IRQHandler	    	[WEAK]
-				EXPORT USB1_IRQHandler	    	[WEAK]
-				EXPORT SCT_IRQHandler	    	[WEAK]
-				EXPORT RIT_IRQHandler	    	[WEAK]
-				EXPORT TIMER0_IRQHandler    	[WEAK]
-				EXPORT TIMER1_IRQHandler    	[WEAK]
-				EXPORT TIMER2_IRQHandler    	[WEAK]
-				EXPORT TIMER3_IRQHandler    	[WEAK]
-				EXPORT MCPWM_IRQHandler	    	[WEAK]
-				EXPORT ADC0_IRQHandler	    	[WEAK]
-				EXPORT I2C0_IRQHandler	    	[WEAK]
-				EXPORT I2C1_IRQHandler	    	[WEAK]
-                EXPORT SPI_IRQHandler	    	[WEAK]
-				EXPORT ADC1_IRQHandler		    [WEAK]
-				EXPORT SSP0_IRQHandler	    	[WEAK]
-				EXPORT SSP1_IRQHandler	    	[WEAK]
-				EXPORT UART0_IRQHandler	    	[WEAK]
-				EXPORT UART1_IRQHandler	    	[WEAK]
-				EXPORT UART2_IRQHandler	    	[WEAK]
-				EXPORT UART3_IRQHandler	    	[WEAK]
-				EXPORT I2S0_IRQHandler	    	[WEAK]
-				EXPORT I2S1_IRQHandler	    	[WEAK]
-				EXPORT SPIFI_IRQHandler     	[WEAK]
-				EXPORT SGPIO_IRQHandler     	[WEAK]
-				EXPORT GPIO0_IRQHandler	        [WEAK]
-				EXPORT GPIO1_IRQHandler     	[WEAK]
-				EXPORT GPIO2_IRQHandler	        [WEAK]
-				EXPORT GPIO3_IRQHandler     	[WEAK]
-				EXPORT GPIO4_IRQHandler     	[WEAK]
-				EXPORT GPIO5_IRQHandler     	[WEAK]
-				EXPORT GPIO6_IRQHandler	        [WEAK]
-				EXPORT GPIO7_IRQHandler	        [WEAK]
-				EXPORT GINT0_IRQHandler	        [WEAK]
-				EXPORT GINT1_IRQHandler	        [WEAK]
-				EXPORT EVRT_IRQHandler		    [WEAK]
-				EXPORT CAN1_IRQHandler	    	[WEAK]
-				EXPORT VADC_IRQHandler	    	[WEAK]
-				EXPORT ATIMER_IRQHandler    	[WEAK]
-				EXPORT RTC_IRQHandler	    	[WEAK]
-				EXPORT WDT_IRQHandler	    	[WEAK]
-				EXPORT CAN0_IRQHandler	    	[WEAK]
-				EXPORT QEI_IRQHandler	    	[WEAK]
-
-DAC_IRQHandler
-MX_CORE_IRQHandler
-DMA_IRQHandler
-FLASHEEPROM_IRQHandler
-ETH_IRQHandler
-SDIO_IRQHandler
-LCD_IRQHandler
-USB0_IRQHandler
-USB1_IRQHandler
-SCT_IRQHandler
-RIT_IRQHandler
-TIMER0_IRQHandler
-TIMER1_IRQHandler
-TIMER2_IRQHandler
-TIMER3_IRQHandler
-MCPWM_IRQHandler
-ADC0_IRQHandler
-I2C0_IRQHandler
-I2C1_IRQHandler
-SPI_IRQHandler
-ADC1_IRQHandler
-SSP0_IRQHandler
-SSP1_IRQHandler
-UART0_IRQHandler
-UART1_IRQHandler
-UART2_IRQHandler
-UART3_IRQHandler
-I2S0_IRQHandler
-I2S1_IRQHandler
-SPIFI_IRQHandler
-SGPIO_IRQHandler
-GPIO0_IRQHandler
-GPIO1_IRQHandler
-GPIO2_IRQHandler
-GPIO3_IRQHandler
-GPIO4_IRQHandler
-GPIO5_IRQHandler
-GPIO6_IRQHandler
-GPIO7_IRQHandler
-GINT0_IRQHandler
-GINT1_IRQHandler
-EVRT_IRQHandler
-CAN1_IRQHandler
-VADC_IRQHandler
-ATIMER_IRQHandler
-RTC_IRQHandler
-WDT_IRQHandler
-CAN0_IRQHandler
-QEI_IRQHandler
-
-                B       .
-
-                ENDP
-                
-                ALIGN
-                END