File content as of revision 77:869cf507173a:

/**
  ******************************************************************************
  * @file    stm32l1xx_aes.h
  * @author  MCD Application Team
  * @version V1.3.0
  * @date    31-January-2014
  * @brief   This file contains all the functions prototypes for the AES firmware 
  *          library.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L1xx_AES_H
#define __STM32L1xx_AES_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32l1xx.h"

/** @addtogroup STM32L1xx_StdPeriph_Driver
  * @{
  */

/** @addtogroup AES
  * @{
  */

/* Exported types ------------------------------------------------------------*/

/**
  * @brief   AES Init structure definition
  */
typedef struct
{
  uint32_t AES_Operation; /*!< Specifies the AES mode of operation.
                               This parameter can be a value of @ref AES_possible_Operation_modes */
  uint32_t AES_Chaining;  /*!< Specifies the AES Chaining modes: ECB, CBC or CTR.
                               This parameter can be a value of @ref AES_possible_chaining_modes */
  uint32_t AES_DataType;  /*!< Specifies the AES data swapping: 32-bit, 16-bit, 8-bit or 1-bit.
                               This parameter can be a value of @ref AES_Data_Types */
}AES_InitTypeDef;

/** 
  * @brief   AES Key(s) structure definition
  */ 
typedef struct
{
  uint32_t AES_Key0;  /*!< Key[31:0]   */
  uint32_t AES_Key1;  /*!< Key[63:32]  */
  uint32_t AES_Key2;  /*!< Key[95:64]  */
  uint32_t AES_Key3;  /*!< Key[127:96] */
}AES_KeyInitTypeDef;

/** 
  * @brief   AES Initialization Vectors (IV) structure definition
  */ 
typedef struct
{
  uint32_t AES_IV0;  /*!< Init Vector IV[31:0]   */
  uint32_t AES_IV1;  /*!< Init Vector IV[63:32]  */
  uint32_t AES_IV2;  /*!< Init Vector IV[95:64]  */
  uint32_t AES_IV3;  /*!< Init Vector IV[127:96] */
}AES_IVInitTypeDef;

/* Exported constants --------------------------------------------------------*/

/** @defgroup AES_Exported_Constants
  * @{
  */ 

/** @defgroup AES_possible_Operation_modes
  * @{
  */  
#define AES_Operation_Encryp               ((uint32_t)0x00000000) /*!< AES in Encryption mode */
#define AES_Operation_KeyDeriv             AES_CR_MODE_0          /*!< AES in Key Derivation mode */
#define AES_Operation_Decryp               AES_CR_MODE_1          /*!< AES in Decryption mode */
#define AES_Operation_KeyDerivAndDecryp    AES_CR_MODE            /*!< AES in Key Derivation and Decryption mode */

#define IS_AES_MODE(OPERATION) (((OPERATION) == AES_Operation_Encryp)    || \
                                ((OPERATION) == AES_Operation_KeyDeriv)  || \
                                ((OPERATION) == AES_Operation_Decryp)    || \
                                ((OPERATION) == AES_Operation_KeyDerivAndDecryp))

/**
  * @}
  */ 

/** @defgroup AES_possible_chaining_modes
  * @{
  */ 
#define AES_Chaining_ECB                   ((uint32_t)0x00000000) /*!< AES in ECB chaining mode */
#define AES_Chaining_CBC                   AES_CR_CHMOD_0         /*!< AES in CBC chaining mode */
#define AES_Chaining_CTR                   AES_CR_CHMOD_1         /*!< AES in CTR chaining mode */

#define IS_AES_CHAINING(CHAINING) (((CHAINING) == AES_Chaining_ECB) || \
                                   ((CHAINING) == AES_Chaining_CBC) || \
                                   ((CHAINING) == AES_Chaining_CTR))
/**
  * @}
  */

/** @defgroup AES_Data_Types
  * @{
  */ 
#define AES_DataType_32b                   ((uint32_t)0x00000000) /*!< 32-bit data. No swapping */
#define AES_DataType_16b                   AES_CR_DATATYPE_0      /*!< 16-bit data. Each half word is swapped */
#define AES_DataType_8b                    AES_CR_DATATYPE_1      /*!< 8-bit data. All bytes are swapped */
#define AES_DataType_1b                    AES_CR_DATATYPE        /*!< 1-bit data. In the word all bits are swapped */

#define IS_AES_DATATYPE(DATATYPE) (((DATATYPE) == AES_DataType_32b) || \
                                    ((DATATYPE) == AES_DataType_16b)|| \
                                    ((DATATYPE) == AES_DataType_8b) || \
                                    ((DATATYPE) == AES_DataType_1b))
/**
  * @}
  */

/** @defgroup AES_Flags
  * @{
  */ 
#define AES_FLAG_CCF                       AES_SR_CCF    /*!< Computation Complete Flag */
#define AES_FLAG_RDERR                     AES_SR_RDERR  /*!< Read Error Flag           */
#define AES_FLAG_WRERR                     AES_SR_WRERR  /*!< Write Error Flag          */

#define IS_AES_FLAG(FLAG) (((FLAG) == AES_FLAG_CCF)    || \
                           ((FLAG) == AES_FLAG_RDERR)  || \
                           ((FLAG) == AES_FLAG_WRERR))
/**
  * @}
  */ 

/** @defgroup AES_Interrupts
  * @{
  */ 
#define AES_IT_CC                          AES_CR_CCIE  /*!< Computation Complete interrupt */
#define AES_IT_ERR                         AES_CR_ERRIE /*!< Error interrupt                */

#define IS_AES_IT(IT) ((((IT) & (uint32_t)0xFFFFF9FF) == 0x00) && ((IT) != 0x00))
#define IS_AES_GET_IT(IT) (((IT) == AES_IT_CC) || ((IT) == AES_IT_ERR))

/**
  * @}
  */

/** @defgroup AES_DMA_Transfer_modes
  * @{
  */ 
#define AES_DMATransfer_In                 AES_CR_DMAINEN                     /*!< DMA requests enabled for input transfer phase */
#define AES_DMATransfer_Out                AES_CR_DMAOUTEN                    /*!< DMA requests enabled for input transfer phase */
#define AES_DMATransfer_InOut              (AES_CR_DMAINEN | AES_CR_DMAOUTEN) /*!< DMA requests enabled for both input and output phases */

#define IS_AES_DMA_TRANSFER(TRANSFER)   (((TRANSFER) == AES_DMATransfer_In)  || \
                                         ((TRANSFER) == AES_DMATransfer_Out)  || \
                                         ((TRANSFER) == AES_DMATransfer_InOut))
/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */

/* Initialization and configuration functions *********************************/
void AES_DeInit(void);
void AES_Init(AES_InitTypeDef* AES_InitStruct);
void AES_KeyInit(AES_KeyInitTypeDef* AES_KeyInitStruct);
void AES_IVInit(AES_IVInitTypeDef* AES_IVInitStruct);
void AES_Cmd(FunctionalState NewState);

/* Structures initialization functions ****************************************/
void AES_StructInit(AES_InitTypeDef* AES_InitStruct);
void AES_KeyStructInit(AES_KeyInitTypeDef* AES_KeyInitStruct);
void AES_IVStructInit(AES_IVInitTypeDef* AES_IVInitStruct);

/* AES Read and Write functions **********************************************/  
void AES_WriteSubData(uint32_t Data);
uint32_t AES_ReadSubData(void);
void AES_ReadKey(AES_KeyInitTypeDef* AES_KeyInitStruct);
void AES_ReadIV(AES_IVInitTypeDef* AES_IVInitStruct);

/* DMA transfers management function ******************************************/
void AES_DMAConfig(uint32_t AES_DMATransfer, FunctionalState NewState);

/* Interrupts and flags management functions **********************************/
void AES_ITConfig(uint32_t AES_IT, FunctionalState NewState);
FlagStatus AES_GetFlagStatus(uint32_t AES_FLAG);
void AES_ClearFlag(uint32_t AES_FLAG);
ITStatus AES_GetITStatus(uint32_t AES_IT);
void AES_ClearITPendingBit(uint32_t AES_IT);

/* High Level AES functions **************************************************/
ErrorStatus AES_ECB_Encrypt(uint8_t* Key, uint8_t* Input, uint32_t Ilength, uint8_t* Output);
ErrorStatus AES_ECB_Decrypt(uint8_t* Key, uint8_t* Input, uint32_t Ilength, uint8_t* Output);
ErrorStatus AES_CBC_Encrypt(uint8_t* Key, uint8_t InitVectors[16], uint8_t* Input, uint32_t Ilength, uint8_t* Output);
ErrorStatus AES_CBC_Decrypt(uint8_t* Key, uint8_t InitVectors[16], uint8_t* Input, uint32_t Ilength, uint8_t* Output);
ErrorStatus AES_CTR_Encrypt(uint8_t* Key, uint8_t InitVectors[16], uint8_t* Input, uint32_t Ilength, uint8_t* Output);
ErrorStatus AES_CTR_Decrypt(uint8_t* Key, uint8_t InitVectors[16], uint8_t* Input, uint32_t Ilength, uint8_t* Output);

#ifdef __cplusplus
}
#endif

#endif /*__STM32L1xx_AES_H */

/**
  * @}
  */ 

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/