The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

TARGET_NUCLEO_F030R8/stm32f0xx_dma.h

Committer:
emilmont
Date:
2014-02-14
Revision:
77:869cf507173a
Child:
81:7d30d6019079

File content as of revision 77:869cf507173a:

/**
  ******************************************************************************
  * @file    stm32f0xx_dma.h
  * @author  MCD Application Team
  * @version V1.3.0
  * @date    16-January-2014
  * @brief   This file contains all the functions prototypes for the DMA firmware
  *          library.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0XX_DMA_H
#define __STM32F0XX_DMA_H

#ifdef __cplusplus
 extern "C" {
#endif

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx.h"

/** @addtogroup STM32F0xx_StdPeriph_Driver
  * @{
  */

/** @addtogroup DMA
  * @{
  */
/* Exported types ------------------------------------------------------------*/

/** 
  * @brief  DMA Init structures definition
  */
typedef struct
{
  uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx.              */

  uint32_t DMA_MemoryBaseAddr;     /*!< Specifies the memory base address for DMAy Channelx.                  */

  uint32_t DMA_DIR;                /*!< Specifies if the peripheral is the source or destination.
                                        This parameter can be a value of @ref DMA_data_transfer_direction     */

  uint32_t DMA_BufferSize;         /*!< Specifies the buffer size, in data unit, of the specified Channel. 
                                        The data unit is equal to the configuration set in DMA_PeripheralDataSize
                                        or DMA_MemoryDataSize members depending in the transfer direction     */

  uint32_t DMA_PeripheralInc;      /*!< Specifies whether the Peripheral address register is incremented or not.
                                        This parameter can be a value of @ref DMA_peripheral_incremented_mode */

  uint32_t DMA_MemoryInc;          /*!< Specifies whether the memory address register is incremented or not.
                                        This parameter can be a value of @ref DMA_memory_incremented_mode     */

  uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width.
                                        This parameter can be a value of @ref DMA_peripheral_data_size        */

  uint32_t DMA_MemoryDataSize;     /*!< Specifies the Memory data width.
                                        This parameter can be a value of @ref DMA_memory_data_size            */

  uint32_t DMA_Mode;               /*!< Specifies the operation mode of the DMAy Channelx.
                                        This parameter can be a value of @ref DMA_circular_normal_mode
                                        @note: The circular buffer mode cannot be used if the memory-to-memory
                                              data transfer is configured on the selected Channel */

  uint32_t DMA_Priority;           /*!< Specifies the software priority for the DMAy Channelx.
                                        This parameter can be a value of @ref DMA_priority_level              */

  uint32_t DMA_M2M;                /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer.
                                        This parameter can be a value of @ref DMA_memory_to_memory            */
}DMA_InitTypeDef;

/* Exported constants --------------------------------------------------------*/

/** @defgroup DMA_Exported_Constants
  * @{
  */

#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \
                                   ((PERIPH) == DMA1_Channel2) || \
                                   ((PERIPH) == DMA1_Channel3) || \
                                   ((PERIPH) == DMA1_Channel4) || \
                                   ((PERIPH) == DMA1_Channel5) || \
                                   ((PERIPH) == DMA1_Channel6) || \
                                   ((PERIPH) == DMA1_Channel7))

/** @defgroup DMA_data_transfer_direction 
  * @{
  */

#define DMA_DIR_PeripheralSRC              ((uint32_t)0x00000000)
#define DMA_DIR_PeripheralDST              DMA_CCR_DIR

#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralSRC) || \
                         ((DIR) == DMA_DIR_PeripheralDST))
/**
  * @}
  */

/** @defgroup DMA_peripheral_incremented_mode 
  * @{
  */

#define DMA_PeripheralInc_Disable          ((uint32_t)0x00000000)
#define DMA_PeripheralInc_Enable           DMA_CCR_PINC

#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Disable) || \
                                            ((STATE) == DMA_PeripheralInc_Enable))
/**
  * @}
  */

/** @defgroup DMA_memory_incremented_mode 
  * @{
  */

#define DMA_MemoryInc_Disable              ((uint32_t)0x00000000)
#define DMA_MemoryInc_Enable               DMA_CCR_MINC

#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Disable) || \
                                        ((STATE) == DMA_MemoryInc_Enable))
/**
  * @}
  */

/** @defgroup DMA_peripheral_data_size 
  * @{
  */

#define DMA_PeripheralDataSize_Byte        ((uint32_t)0x00000000)
#define DMA_PeripheralDataSize_HalfWord    DMA_CCR_PSIZE_0
#define DMA_PeripheralDataSize_Word        DMA_CCR_PSIZE_1

#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \
                                           ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \
                                           ((SIZE) == DMA_PeripheralDataSize_Word))
/**
  * @}
  */

/** @defgroup DMA_memory_data_size 
  * @{
  */

#define DMA_MemoryDataSize_Byte            ((uint32_t)0x00000000)
#define DMA_MemoryDataSize_HalfWord        DMA_CCR_MSIZE_0
#define DMA_MemoryDataSize_Word            DMA_CCR_MSIZE_1

#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \
                                       ((SIZE) == DMA_MemoryDataSize_HalfWord) || \
                                       ((SIZE) == DMA_MemoryDataSize_Word))
/**
  * @}
  */

/** @defgroup DMA_circular_normal_mode 
  * @{
  */

#define DMA_Mode_Normal                    ((uint32_t)0x00000000)
#define DMA_Mode_Circular                  DMA_CCR_CIRC

#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Normal) || ((MODE) == DMA_Mode_Circular))
/**
  * @}
  */

/** @defgroup DMA_priority_level 
  * @{
  */

#define DMA_Priority_VeryHigh              DMA_CCR_PL
#define DMA_Priority_High                  DMA_CCR_PL_1
#define DMA_Priority_Medium                DMA_CCR_PL_0
#define DMA_Priority_Low                   ((uint32_t)0x00000000)

#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \
                                   ((PRIORITY) == DMA_Priority_High) || \
                                   ((PRIORITY) == DMA_Priority_Medium) || \
                                   ((PRIORITY) == DMA_Priority_Low))
/**
  * @}
  */

/** @defgroup DMA_memory_to_memory 
  * @{
  */

#define DMA_M2M_Disable                    ((uint32_t)0x00000000)
#define DMA_M2M_Enable                     DMA_CCR_MEM2MEM

#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Disable) || ((STATE) == DMA_M2M_Enable))

/**
  * @}
  */

/** @defgroup DMA_interrupts_definition
  * @{
  */

#define DMA_IT_TC                          DMA_CCR_TCIE
#define DMA_IT_HT                          DMA_CCR_HTIE
#define DMA_IT_TE                          DMA_CCR_TEIE

#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00))

#define DMA1_IT_GL1                        DMA_ISR_GIF1
#define DMA1_IT_TC1                        DMA_ISR_TCIF1
#define DMA1_IT_HT1                        DMA_ISR_HTIF1
#define DMA1_IT_TE1                        DMA_ISR_TEIF1
#define DMA1_IT_GL2                        DMA_ISR_GIF2
#define DMA1_IT_TC2                        DMA_ISR_TCIF2
#define DMA1_IT_HT2                        DMA_ISR_HTIF2
#define DMA1_IT_TE2                        DMA_ISR_TEIF2
#define DMA1_IT_GL3                        DMA_ISR_GIF3
#define DMA1_IT_TC3                        DMA_ISR_TCIF3
#define DMA1_IT_HT3                        DMA_ISR_HTIF3
#define DMA1_IT_TE3                        DMA_ISR_TEIF3
#define DMA1_IT_GL4                        DMA_ISR_GIF4
#define DMA1_IT_TC4                        DMA_ISR_TCIF4
#define DMA1_IT_HT4                        DMA_ISR_HTIF4
#define DMA1_IT_TE4                        DMA_ISR_TEIF4
#define DMA1_IT_GL5                        DMA_ISR_GIF5
#define DMA1_IT_TC5                        DMA_ISR_TCIF5
#define DMA1_IT_HT5                        DMA_ISR_HTIF5
#define DMA1_IT_TE5                        DMA_ISR_TEIF5
#define DMA1_IT_GL6                        DMA_ISR_GIF6   /*!< Only applicable for STM32F072 devices */
#define DMA1_IT_TC6                        DMA_ISR_TCIF6  /*!< Only applicable for STM32F072 devices */
#define DMA1_IT_HT6                        DMA_ISR_HTIF6  /*!< Only applicable for STM32F072 devices */
#define DMA1_IT_TE6                        DMA_ISR_TEIF6  /*!< Only applicable for STM32F072 devices */
#define DMA1_IT_GL7                        DMA_ISR_GIF7   /*!< Only applicable for STM32F072 devices */
#define DMA1_IT_TC7                        DMA_ISR_TCIF7  /*!< Only applicable for STM32F072 devices */
#define DMA1_IT_HT7                        DMA_ISR_HTIF7  /*!< Only applicable for STM32F072 devices */
#define DMA1_IT_TE7                        DMA_ISR_TEIF7  /*!< Only applicable for STM32F072 devices */

#define IS_DMA_CLEAR_IT(IT) ((((IT) & 0xF0000000) == 0x00) && ((IT) != 0x00))

#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \
                           ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \
                           ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \
                           ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \
                           ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \
                           ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \
                           ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \
                           ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \
                           ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \
                           ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \
                           ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \
                           ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \
                           ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \
                           ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7))

/**
  * @}
  */

/** @defgroup DMA_flags_definition 
  * @{
  */
#define DMA1_FLAG_GL1                      DMA_ISR_GIF1
#define DMA1_FLAG_TC1                      DMA_ISR_TCIF1
#define DMA1_FLAG_HT1                      DMA_ISR_HTIF1
#define DMA1_FLAG_TE1                      DMA_ISR_TEIF1
#define DMA1_FLAG_GL2                      DMA_ISR_GIF2
#define DMA1_FLAG_TC2                      DMA_ISR_TCIF2
#define DMA1_FLAG_HT2                      DMA_ISR_HTIF2
#define DMA1_FLAG_TE2                      DMA_ISR_TEIF2
#define DMA1_FLAG_GL3                      DMA_ISR_GIF3
#define DMA1_FLAG_TC3                      DMA_ISR_TCIF3
#define DMA1_FLAG_HT3                      DMA_ISR_HTIF3
#define DMA1_FLAG_TE3                      DMA_ISR_TEIF3
#define DMA1_FLAG_GL4                      DMA_ISR_GIF4
#define DMA1_FLAG_TC4                      DMA_ISR_TCIF4
#define DMA1_FLAG_HT4                      DMA_ISR_HTIF4
#define DMA1_FLAG_TE4                      DMA_ISR_TEIF4
#define DMA1_FLAG_GL5                      DMA_ISR_GIF5
#define DMA1_FLAG_TC5                      DMA_ISR_TCIF5
#define DMA1_FLAG_HT5                      DMA_ISR_HTIF5
#define DMA1_FLAG_TE5                      DMA_ISR_TEIF5
#define DMA1_FLAG_GL6                      DMA_ISR_GIF6   /*!< Only applicable for STM32F072 devices */
#define DMA1_FLAG_TC6                      DMA_ISR_TCIF6  /*!< Only applicable for STM32F072 devices */
#define DMA1_FLAG_HT6                      DMA_ISR_HTIF6  /*!< Only applicable for STM32F072 devices */
#define DMA1_FLAG_TE6                      DMA_ISR_TEIF6  /*!< Only applicable for STM32F072 devices */
#define DMA1_FLAG_GL7                      DMA_ISR_GIF7   /*!< Only applicable for STM32F072 devices */
#define DMA1_FLAG_TC7                      DMA_ISR_TCIF7  /*!< Only applicable for STM32F072 devices */
#define DMA1_FLAG_HT7                      DMA_ISR_HTIF7  /*!< Only applicable for STM32F072 devices */
#define DMA1_FLAG_TE7                      DMA_ISR_TEIF7  /*!< Only applicable for STM32F072 devices */

#define IS_DMA_CLEAR_FLAG(FLAG) ((((FLAG) & 0xF0000000) == 0x00) && ((FLAG) != 0x00))

#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \
                               ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \
                               ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \
                               ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \
                               ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \
                               ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \
                               ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \
                               ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \
                               ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \
                               ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \
                               ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \
                               ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \
                               ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \
                               ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7))

/**
  * @}
  */

/** @defgroup DMA_Buffer_Size 
  * @{
  */

#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))

/**
  * @}
  */

/**
  * @}
  */

/* Exported macro ------------------------------------------------------------*/
/* Exported functions ------------------------------------------------------- */

/* Function used to set the DMA configuration to the default reset state ******/
void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx);

/* Initialization and Configuration functions *********************************/
void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct);
void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct);
void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);

/* Data Counter functions******************************************************/ 
void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber);
uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);

/* Interrupts and flags management functions **********************************/
void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState);
FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG);
void DMA_ClearFlag(uint32_t DMA_FLAG);
ITStatus DMA_GetITStatus(uint32_t DMA_IT);
void DMA_ClearITPendingBit(uint32_t DMA_IT);

#ifdef __cplusplus
}
#endif

#endif /*__STM32F0XX_DMA_H */

/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/