File content as of revision 577:15494b56c2f3:

/* File: startup_ARMCM3.s
 * Purpose: startup file for Cortex-M3/M4 devices. Should use with 
 *   GNU Tools for ARM Embedded Processors
 * Version: V1.1
 * Date: 17 June 2011
 * 
 * Copyright (C) 2011 ARM Limited. All rights reserved.
 * ARM Limited (ARM) is supplying this software for use with Cortex-M3/M4 
 * processor based microcontrollers.  This file can be freely distributed 
 * within development tools that are supporting such ARM based processors. 
 *
 * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
 * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
 * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
 * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
 */
    .syntax unified
    .extern _start
 
@ Standard definitions of mode bits and interrupt (I & F) flags in PSRs
    .equ    USR_MODE        ,   0x10
    .equ    FIQ_MODE        ,   0x11
    .equ    IRQ_MODE        ,   0x12
    .equ    SVC_MODE        ,   0x13
    .equ    ABT_MODE        ,   0x17
    .equ    UND_MODE        ,   0x1b
    .equ    SYS_MODE        ,   0x1f
    .equ    Thum_bit        ,   0x20            @ CPSR/SPSR Thumb bit

    .equ    GICI_BASE       ,   0xe8202000
    .equ    ICCIAR_OFFSET   ,   0x0000000C
    .equ    ICCEOIR_OFFSET  ,   0x00000010
    .equ    ICCHPIR_OFFSET  ,   0x00000018
    .equ    GICD_BASE       ,   0xe8201000
    .equ    ICDISER0_OFFSET ,   0x00000100
    .equ    ICDICER0_OFFSET ,   0x00000180
    .equ    ICDISPR0_OFFSET ,   0x00000200
    .equ    ICDABR0_OFFSET  ,   0x00000300
    .equ    ICDIPR0_OFFSET  ,   0x00000400

    .equ    Mode_USR        ,   0x10
    .equ    Mode_FIQ        ,   0x11
    .equ    Mode_IRQ        ,   0x12
    .equ    Mode_SVC        ,   0x13
    .equ    Mode_ABT        ,   0x17
    .equ    Mode_UND        ,   0x1B
    .equ    Mode_SYS        ,   0x1F

    .equ    I_Bit           ,   0x80            @ when I bit is set, IRQ is disabled 
    .equ    F_Bit           ,   0x40            @ when F bit is set, FIQ is disabled 
    .equ    T_Bit           ,   0x20            @ when T bit is set, core is in Thumb state 

    .equ    GIC_ERRATA_CHECK_1, 0x000003FE 
    .equ    GIC_ERRATA_CHECK_2, 0x000003FF 

    .equ    Sect_Normal     , 0x00005c06        @ outer & inner wb/wa, non-shareable, executable, rw, domain 0, base addr 0 
    .equ    Sect_Normal_Cod , 0x0000dc06        @ outer & inner wb/wa, non-shareable, executable, ro, domain 0, base addr 0 
    .equ    Sect_Normal_RO  , 0x0000dc16        @ as Sect_Normal_Cod, but not executable 
    .equ    Sect_Normal_RW  , 0x00005c16        @ as Sect_Normal_Cod, but writeable and not executable 
    .equ    Sect_SO         , 0x00000c12        @ strongly-ordered (therefore shareable), not executable, rw, domain 0, base addr 0 
    .equ    Sect_Device_RO  , 0x00008c12        @ device, non-shareable, non-executable, ro, domain 0, base addr 0 
    .equ    Sect_Device_RW  , 0x00000c12        @ as Sect_Device_RO, but writeable 
    .equ    Sect_Fault      , 0x00000000        @ this translation will fault (the bottom 2 bits are important, the rest are ignored) 

    .equ    RAM_BASE        , 0x80000000
    .equ    VRAM_BASE       , 0x18000000
    .equ    SRAM_BASE       , 0x2e000000
    .equ    ETHERNET        , 0x1a000000
    .equ    CS3_PERIPHERAL_BASE, 0x1c000000


@ Stack Configuration

    .EQU    UND_Stack_Size  , 0x00000100
    .EQU    SVC_Stack_Size  , 0x00008000
    .EQU    ABT_Stack_Size  , 0x00000100
    .EQU    FIQ_Stack_Size  , 0x00000100
    .EQU    IRQ_Stack_Size  , 0x00008000
    .EQU    USR_Stack_Size  , 0x00004000

    .EQU    ISR_Stack_Size, (UND_Stack_Size + SVC_Stack_Size + ABT_Stack_Size + FIQ_Stack_Size + IRQ_Stack_Size)

    .section .stack
    .align 3
    .globl    __StackTop
    .globl    __StackLimit
__StackLimit:
    .space    ISR_Stack_Size
__initial_sp:
    .space    USR_Stack_Size
    .size __StackLimit, . - __StackLimit
__StackTop:
    .size __StackTop, . - __StackTop


@ Heap Configuration

    .EQU    Heap_Size       , 0x00080000

    .section .heap
    .align 3
    .globl    __HeapBase
    .globl    __HeapLimit
__HeapBase:
    .space    Heap_Size
    .size __HeapBase, . - __HeapBase
__HeapLimit:
    .size __HeapLimit, . - __HeapLimit


    .section .isr_vector
    .align 2
    .globl __isr_vector
__isr_vector:
    .long   0xe59ff018 /* 0x00 */
    .long   0xe59ff018 /* 0x04 */
    .long   0xe59ff018 /* 0x08 */
    .long   0xe59ff018 /* 0x0c */
    .long   0xe59ff018 /* 0x10 */
    .long   0xe59ff018 /* 0x14 */
    .long   0xe59ff018 /* 0x18 */
    .long   0xe59ff018 /* 0x1c */

    .long   Reset_Handler         /* 0x20 */
    .long   Undef_Handler         /* 0x24 */
    .long   SVC_Handler           /* 0x28 */
    .long   PAbt_Handler          /* 0x2c */
    .long   DAbt_Handler          /* 0x30 */
    .long   0                     /* Reserved */
    .long   IRQ_Handler           /* IRQ */
    .long   FIQ_Handler           /* FIQ */


    .size    __isr_vector, . - __isr_vector

    .text
    .align 2
    .globl          Reset_Handler
    .type          Reset_Handler, %function
Reset_Handler:
    @ Put any cores other than 0 to sleep
    mrc     p15, 0, r0, c0, c0, 5   @ Read MPIDR
    ands    r0, r0, #3

goToSleep:
    wfine
    bne     goToSleep

@ Enable access to NEON/VFP by enabling access to Coprocessors 10 and 11. 
@ Enables Full Access i.e. in both privileged and non privileged modes 
    mrc     p15, 0, r0, c1, c0, 2       @ Read Coprocessor Access Control Register (CPACR) 
    orr     r0, r0, #(0xF << 20)        @ Enable access to CP 10 & 11 
    mcr     p15, 0, r0, c1, c0, 2       @ Write Coprocessor Access Control Register (CPACR) 
    isb

@ Switch on the VFP and NEON hardware 
    mov     r0, #0x40000000
    vmsr    fpexc, r0                   @ Write FPEXC register, EN bit set 

    mrc     p15, 0, r0, c1, c0, 0       @ Read CP15 System Control register 
    bic     r0, r0, #(0x1 << 12)        @ Clear I bit 12 to disable I Cache 
    bic     r0, r0, #(0x1 <<  2)        @ Clear C bit  2 to disable D Cache 
    bic     r0, r0, #0x1                @ Clear M bit  0 to disable MMU 
    bic     r0, r0, #(0x1 << 11)        @ Clear Z bit 11 to disable branch prediction 
    bic     r0, r0, #(0x1 << 13)        @ Clear V bit 13 to disable hivecs 
    mcr     p15, 0, r0, c1, c0, 0       @ Write value back to CP15 System Control register 
    isb

@ Set Vector Base Address Register (VBAR) to point to this application's vector table
    ldr     r0, =__isr_vector
    mcr     p15, 0, r0, c12, c0, 0
 
@ Setup Stack for each exceptional mode 
/*    ldr     r0, =__StackTop  */
    ldr     r0, =(__StackTop - USR_Stack_Size)

@ Enter Undefined Instruction Mode and set its Stack Pointer 
    msr     cpsr_c, #(Mode_UND | I_Bit | F_Bit)
    mov     sp, r0
    sub     r0, r0, #UND_Stack_Size

@ Enter Abort Mode and set its Stack Pointer 
    msr     cpsr_c, #(Mode_ABT | I_Bit | F_Bit)
    mov     sp, r0 
    sub     r0, r0, #ABT_Stack_Size

@ Enter FIQ Mode and set its Stack Pointer 
    msr     cpsr_c, #(Mode_FIQ | I_Bit | F_Bit)
    mov     sp, r0 
    sub     r0, r0, #FIQ_Stack_Size

@ Enter IRQ Mode and set its Stack Pointer 
    msr     cpsr_c, #(Mode_IRQ | I_Bit | F_Bit)
    mov     sp, r0 
    sub     r0, r0, #IRQ_Stack_Size

@ Enter Supervisor Mode and set its Stack Pointer 
    msr     cpsr_c, #(Mode_SVC | I_Bit | F_Bit)
    mov     sp, r0 

@ Enter System Mode to complete initialization and enter kernel 
    msr     cpsr_c, #(Mode_SYS | I_Bit | F_Bit)
    mov     sp, r0 

    isb
    ldr     r0, =RZ_A1_SetSramWriteEnable
    blx     r0

    .extern  create_translation_table
    bl      create_translation_table 

@  USR/SYS stack pointer will be set during kernel init
    ldr     r0, =SystemInit
    blx     r0
    ldr     r0, =InitMemorySubsystem
    blx     r0

@ fp_init
    mov      r0, #0x3000000
    vmsr     fpscr, r0


@ data sections copy
    ldr     r4, =__copy_table_start__
    ldr     r5, =__copy_table_end__

.L_loop0:
    cmp     r4, r5
    bge     .L_loop0_done
    ldr     r1, [r4]
    ldr     r2, [r4, #4]
    ldr     r3, [r4, #8]

.L_loop0_0:
    subs    r3, #4
    ittt    ge
    ldrge   r0, [r1, r3]
    strge   r0, [r2, r3]
    bge     .L_loop0_0

    adds    r4, #12
    b       .L_loop0

.L_loop0_done:

@ bss sections clear
    ldr     r3, =__zero_table_start__
    ldr     r4, =__zero_table_end__

.L_loop2:
    cmp     r3, r4
    bge     .L_loop2_done
    ldr     r1, [r3]
    ldr     r2, [r3, #4]
    movs    r0, 0

.L_loop2_0:
    subs    r2, #4
    itt     ge
    strge   r0, [r1, r2]
    bge     .L_loop2_0

    adds    r3, #8
    b       .L_loop2
.L_loop2_done:


    ldr     r0, =_start
    bx      r0

    ldr     r0, sf_boot     @ dummy to keep boot loader area
loop_here:
    b       loop_here

sf_boot: 
    .word   boot_loader

    .pool
    .size Reset_Handler, . - Reset_Handler


    .text

Undef_Handler:
                .global Undef_Handler
                .func   Undef_Handler
                .extern CUndefHandler
                SRSDB   SP!, #Mode_UND
                PUSH    {R0-R4, R12}              /* Save APCS corruptible registers to UND mode stack */

                MRS     R0, SPSR
                TST     R0, #T_Bit                /* Check mode */
                MOVEQ   R1, #4                    /* R1 = 4 ARM mode */
                MOVNE   R1, #2                    /* R1 = 2 Thumb mode */
                SUB     R0, LR, R1
                LDREQ   R0, [R0]                  /* ARM mode - R0 points to offending instruction */
                BEQ     undef_cont

                /* Thumb instruction */
                /* Determine if it is a 32-bit Thumb instruction */
                LDRH    R0, [R0]
                MOV     R2, #0x1c
                CMP     R2, R0, LSR #11
                BHS     undef_cont                /* 16-bit Thumb instruction */

                /* 32-bit Thumb instruction. Unaligned - we need to reconstruct the offending instruction. */
                LDRH    R2, [LR]
                ORR     R0, R2, R0, LSL #16
undef_cont:
                MOV     R2, LR                    /* Set LR to third argument */
                
/*              AND     R12, SP, #4 */            /* Ensure stack is 8-byte aligned */
                MOV     R3, SP                    /* Ensure stack is 8-byte aligned */
                AND     R12, R3, #4
                SUB     SP, SP, R12               /* Adjust stack */
                PUSH    {R12, LR}                 /* Store stack adjustment and dummy LR */

                /* R0 Offending instruction */
                /* R1 =2 (Thumb) or =4 (ARM) */
                BL      CUndefHandler

                POP     {R12, LR}                 /* Get stack adjustment & discard dummy LR */
                ADD     SP, SP, R12               /* Unadjust stack */

                LDR     LR, [SP, #24]             /* Restore stacked LR and possibly adjust for retry */
                SUB     LR, LR, R0
                LDR     R0, [SP, #28]             /* Restore stacked SPSR */
                MSR     SPSR_cxsf, R0
                POP     {R0-R4, R12}              /* Restore stacked APCS registers */
                ADD     SP, SP, #8                /* Adjust SP for already-restored banked registers */
                MOVS    PC, LR
                .endfunc
 
PAbt_Handler:
                .global PAbt_Handler
                .func   PAbt_Handler
                .extern CPAbtHandler
                SUB     LR, LR, #4                /* Pre-adjust LR */
                SRSDB   SP!, #Mode_ABT            /* Save LR and SPRS to ABT mode stack */
                PUSH    {R0-R4, R12}              /* Save APCS corruptible registers to ABT mode stack */
                MRC     p15, 0, R0, c5, c0, 1     /* IFSR */
                MRC     p15, 0, R1, c6, c0, 2     /* IFAR */

                MOV     R2, LR                    /* Set LR to third argument */

/*              AND     R12, SP, #4 */            /* Ensure stack is 8-byte aligned */
                MOV     R3, SP                    /* Ensure stack is 8-byte aligned */
                AND     R12, R3, #4
                SUB     SP, SP, R12               /* Adjust stack */
                PUSH    {R12, LR}                 /* Store stack adjustment and dummy LR */

                BL      CPAbtHandler

                POP     {R12, LR}                 /* Get stack adjustment & discard dummy LR */
                ADD     SP, SP, R12               /* Unadjust stack */

                POP     {R0-R4, R12}              /* Restore stack APCS registers */
                RFEFD   SP!                       /* Return from exception */
                .endfunc

DAbt_Handler:
                .global DAbt_Handler
                .func   DAbt_Handler
                .extern CDAbtHandler
                SUB     LR, LR, #8                /* Pre-adjust LR */
                SRSDB   SP!, #Mode_ABT            /* Save LR and SPRS to ABT mode stack */
                PUSH    {R0-R4, R12}              /* Save APCS corruptible registers to ABT mode stack */
                CLREX                             /* State of exclusive monitors unknown after taken data abort */
                MRC     p15, 0, R0, c5, c0, 0     /* DFSR */
                MRC     p15, 0, R1, c6, c0, 0     /* DFAR */

                MOV     R2, LR                    /* Set LR to third argument */

/*              AND     R12, SP, #4 */            /* Ensure stack is 8-byte aligned */
                MOV     R3, SP                    /* Ensure stack is 8-byte aligned */
                AND     R12, R3, #4
                SUB     SP, SP, R12               /* Adjust stack */
                PUSH    {R12, LR}                 /* Store stack adjustment and dummy LR */

                BL      CDAbtHandler

                POP     {R12, LR}                 /* Get stack adjustment & discard dummy LR */
                ADD     SP, SP, R12               /* Unadjust stack */

                POP     {R0-R4, R12}              /* Restore stacked APCS registers */
                RFEFD   SP!                       /* Return from exception */
                .endfunc
 
FIQ_Handler:
                .global FIQ_Handler
                .func   FIQ_Handler
                /* An FIQ might occur between the dummy read and the real read of the GIC in IRQ_Handler,
                 * so if a real FIQ Handler is implemented, this will be needed before returning:
                 */
                /* LDR     R1, =GICI_BASE
                   LDR     R0, [R1, #ICCHPIR_OFFSET]   ; Dummy Read ICCHPIR (GIC CPU Interface register) to avoid GIC 390 errata 801120
                 */
                B       .
                .endfunc
 
                .extern SVC_Handler                 /* refer RTX function */

IRQ_Handler: 
                .global IRQ_Handler
                .func   IRQ_Handler
                .extern IRQCount
                .extern IRQTable
                .extern IRQNestLevel

                /* prologue */
                SUB     LR, LR, #4                  /* Pre-adjust LR */
                SRSDB   SP!, #Mode_SVC              /* Save LR_IRQ and SPRS_IRQ to SVC mode stack */
                CPS     #Mode_SVC                   /* Switch to SVC mode, to avoid a nested interrupt corrupting LR on a BL */
                PUSH    {R0-R3, R12}                /* Save remaining APCS corruptible registers to SVC stack */

/*              AND     R1, SP, #4 */               /* Ensure stack is 8-byte aligned */
                MOV     R3, SP                      /* Ensure stack is 8-byte aligned */
                AND     R1, R3, #4
                SUB     SP, SP, R1                  /* Adjust stack */
                PUSH    {R1, LR}                    /* Store stack adjustment and LR_SVC to SVC stack */

                LDR     R0, =IRQNestLevel           /* Get address of nesting counter */
                LDR     R1, [R0]
                ADD     R1, R1, #1                  /* Increment nesting counter */
                STR     R1, [R0]

                /* identify and acknowledge interrupt */
                LDR     R1, =GICI_BASE
                LDR     R0, [R1, #ICCHPIR_OFFSET]   /* Dummy Read ICCHPIR (GIC CPU Interface register) to avoid GIC 390 errata 801120 */
                LDR     R0, [R1, #ICCIAR_OFFSET]    /* Read ICCIAR (GIC CPU Interface register) */
                DSB                                 /* Ensure that interrupt acknowledge completes before re-enabling interrupts */

                /* Workaround GIC 390 errata 733075
                 * If the ID is not 0, then service the interrupt as normal.
                 * If the ID is 0 and active, then service interrupt ID 0 as normal.
                 * If the ID is 0 but not active, then the GIC CPU interface may be locked-up, so unlock it
                 *   with a dummy write to ICDIPR0.  This interrupt should be treated as spurious and not serviced.
                 */
                LDR     R2, =GICD_BASE
                LDR     R3, =GIC_ERRATA_CHECK_1
                CMP     R0, R3
                BEQ     unlock_cpu
                LDR     R3, =GIC_ERRATA_CHECK_2
                CMP     R0, R3
                BEQ     unlock_cpu
                CMP     R0, #0
                BNE     int_active                  /* If the ID is not 0, then service the interrupt */
                LDR     R3, [R2, #ICDABR0_OFFSET]   /* Get the interrupt state */
                TST     R3, #1
                BNE     int_active                  /* If active, then service the interrupt */
unlock_cpu:
                LDR     R3, [R2, #ICDIPR0_OFFSET]   /* Not active, so unlock the CPU interface */
                STR     R3, [R2, #ICDIPR0_OFFSET]   /*   with a dummy write */
                DSB                                 /* Ensure the write completes before continuing */
                B       ret_irq                     /* Do not service the spurious interrupt */
                /* End workaround */

int_active:
                LDR     R2, =IRQCount               /* Read number of IRQs */
                LDR     R2, [R2]
                CMP     R0, R2                      /* Clean up and return if no handler */
                BHS     ret_irq                     /* In a single-processor system, spurious interrupt ID 1023 does not need any special handling */
                LDR     R2, =IRQTable               /* Get address of handler */
                LDR     R2, [R2, R0, LSL #2]
                CMP     R2, #0                      /* Clean up and return if handler address is 0 */
                BEQ     ret_irq
                PUSH    {R0,R1}

                CPSIE   i                           /* Now safe to re-enable interrupts */
                BLX     R2                          /* Call handler. R0 will be IRQ number */
                CPSID   i                           /* Disable interrupts again */

                /* write EOIR (GIC CPU Interface register) */
                POP     {R0,R1}
                DSB                                 /* Ensure that interrupt source is cleared before we write the EOIR */
ret_irq:
                /* epilogue */
                STR     R0, [R1, #ICCEOIR_OFFSET]

                LDR     R0, =IRQNestLevel           /* Get address of nesting counter */
                LDR     R1, [R0]
                SUB     R1, R1, #1                  /* Decrement nesting counter */
                STR     R1, [R0]

                POP     {R1, LR}                    /* Get stack adjustment and restore LR_SVC */
                ADD     SP, SP, R1                  /* Unadjust stack */

                POP     {R0-R3,R12}                 /* Restore stacked APCS registers */
                RFEFD   SP!                         /* Return from exception */
                .endfunc

/*    Macro to define default handlers. Default handler
 *    will be weak symbol and just dead loops. They can be
 *    overwritten by other handlers */
                .macro    def_default_handler    handler_name
                .align 1
                .thumb_func
                .weak    \handler_name
                .type    \handler_name, %function
\handler_name :
                b    .
                .size    \handler_name, . - \handler_name
                .endm

                def_default_handler    SVC_Handler


/* User Initial Stack & Heap */

                .ifdef __MICROLIB
                
                .global __initial_sp
                .global __heap_base
                .global __heap_limit

                .else

                .extern __use_two_region_memory
                .global __user_initial_stackheap
__user_initial_stackheap:

                LDR     R0, =  __HeapBase
                LDR     R1, =(__StackTop)
                LDR     R2, = (__HeapBase +  Heap_Size)
                LDR     R3, = (__StackTop - USR_Stack_Size)
                BX      LR

                .endif


                .END