Diff: targets/hal/TARGET_Atmel/TARGET_SAM21/drivers/port/port.c

Revision:

613:bc40b8d2aec4

Parent:

612:fba1c7dc54c0

Child:

614:9d86c2ae5de0

--- a/targets/hal/TARGET_Atmel/TARGET_SAM21/drivers/port/port.c	Tue Aug 18 15:00:09 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,64 +0,0 @@
-#include <port.h>
-
-/**
- *  \brief Writes a Port pin configuration to the hardware module.
- *
- *  Writes out a given configuration of a Port pin configuration to the hardware
- *  module.
- *
- *  \note If the pin direction is set as an output, the pull-up/pull-down input
- *        configuration setting is ignored.
- *
- *  \param[in] gpio_pin  Index of the GPIO pin to configure
- *  \param[in] config    Configuration settings for the pin
- */
-void port_pin_set_config(
-    const uint8_t gpio_pin,
-    const struct port_config *const config)
-{
-    /* Sanity check arguments */
-    Assert(config);
-
-    struct system_pinmux_config pinmux_config;
-    system_pinmux_get_config_defaults(&pinmux_config);
-
-    pinmux_config.mux_position = SYSTEM_PINMUX_GPIO;
-    pinmux_config.direction    = (enum system_pinmux_pin_dir)config->direction;
-    pinmux_config.input_pull   = (enum system_pinmux_pin_pull)config->input_pull;
-    pinmux_config.powersave    = config->powersave;
-
-    system_pinmux_pin_set_config(gpio_pin, &pinmux_config);
-}
-
-/**
- *  \brief Writes a Port group configuration group to the hardware module.
- *
- *  Writes out a given configuration of a Port group configuration to the
- *  hardware module.
- *
- *  \note If the pin direction is set as an output, the pull-up/pull-down input
- *        configuration setting is ignored.
- *
- *  \param[out] port    Base of the PORT module to write to
- *  \param[in]  mask    Mask of the port pin(s) to configure
- *  \param[in]  config  Configuration settings for the pin group
- */
-void port_group_set_config(
-    PortGroup *const port,
-    const uint32_t mask,
-    const struct port_config *const config)
-{
-    /* Sanity check arguments */
-    Assert(port);
-    Assert(config);
-
-    struct system_pinmux_config pinmux_config;
-    system_pinmux_get_config_defaults(&pinmux_config);
-
-    pinmux_config.mux_position = SYSTEM_PINMUX_GPIO;
-    pinmux_config.direction    = (enum system_pinmux_pin_dir)config->direction;
-    pinmux_config.input_pull   = (enum system_pinmux_pin_pull)config->input_pull;
-    pinmux_config.powersave    = config->powersave;
-
-    system_pinmux_group_set_config(port, mask, &pinmux_config);
-}