derived from Aidafruit SSD1306 library
Dependents: Test_SSD1306 L152RE_OLED_SSD1306 EcranZumo
Fork of SSD1306 by
ssd1306.cpp
- Committer:
- Byrn
- Date:
- 2013-02-05
- Revision:
- 1:1d58d378221c
- Parent:
- 0:21cb91208386
- Child:
- 2:e479b0296757
File content as of revision 1:1d58d378221c:
#include "mbed.h" #include "ssd1306.h" SSD1306::SSD1306(PinName cs, PinName rs, PinName dc, PinName clk, PinName data) : _spi(data, NC, clk), _cs(cs), _reset(rs), _dc(dc) { } void SSD1306::set_low_column(int v) { _send_command(SSD1306_SETLOWCOLUMN | v); } void SSD1306::set_high_column(int v) { _send_command(SSD1306_SETHIGHCOLUMN | v); } void SSD1306::set_start_line(int v) { _send_command(SSD1306_SETSTARTLINE | v); } void SSD1306::off() { _send_command(SSD1306_DISPLAYOFF); } void SSD1306::on() { _send_command(SSD1306_DISPLAYON); } void SSD1306::sleep() { _send_command(0xAE); } void SSD1306::wake() { _send_command(0xAF); } void SSD1306::set_inverse(unsigned char value) { _send_command(value ? 0xA7 : 0xA6); } void SSD1306::set_display_offset(unsigned char value) { _send_command(0xD3); _send_command(value); } void SSD1306::set_contrast(unsigned char value) { _send_command(0x81); _send_command(value); } void SSD1306::set_display_start_line(unsigned char value) { _send_command(0x40 | value); } void SSD1306::set_horizontal_flip(unsigned char value) { _send_command(value ? 0xA1 : 0xA0); } void SSD1306::set_multiplex_ratio(unsigned char value) { _send_command(0xA8 | value); } void SSD1306::set_com_output_scan_direction(unsigned char value) { _send_command(value ? 0xC8 : 0xC0); } void SSD1306::set_com_pins_hardware_configuration(unsigned char sequential, unsigned char lr_remap) { _send_command(0xDA); _send_command(0x02 | ((sequential & 1) << 5) | ((lr_remap & 1) << 6)); } void SSD1306::initialise() { // Init _reset = 1; wait(0.01); _reset = 0; wait(0.10); _reset = 1; off(); set_low_column(0); set_high_column(0); set_start_line(0); _send_command(0xAE); // turn off _send_command(0x00); // set low column address _send_command(0x10); // set high column address _send_command(0x40); // set start line address set_contrast(0xFF); _send_command(0xA1); // set segment re-map 95 to 0 _send_command(0xA6); // set normal display _send_command(0xA8); // set multiplex ratio (1-64); _send_command(0x3F); // 1/64 duty _send_command(0xD3); // set display offset _send_command(0x00); // -- no offset _send_command(0xD5); // set display clock divide ratio/oscillator frequency _send_command(0x80); // -- set divide ratio _send_command(0xD9); // set precharge period; _send_command(0xF1); _send_command(0xDA); // set com pins hardware config _send_command(0x12); _send_command(0xDB); // set vcomh _send_command(0x40); _send_command(0x8D); // set charge pump enable/disable _send_command(0x14); // enable (0x10 disable) _send_command(0xAF); // switch panel on set_inverse(1); /* _send_command(SSD1306_SETCONTRAST); _send_command(0xCF); // chargepump, could be 0x9F for external 9V _send_command(0xA1); // setment remap 95 to 0 (??) invert(0); _send_command(SSD1306_DISPLAYALLON_RESUME); _send_command(SSD1306_SETMULTIPLEX); _send_command(0x3F); // 1/64 duty set_display_offset(0); _send_command(SSD1306_SETDISPLAYCLOCKDIV); _send_command(0x80); // suggested value = 0x80 _send_command(SSD1306_SETPRECHARGE); _send_command(0xF1); // dc/dc, could be 0x22 for external 9V _send_command(SSD1306_SETCOMPINS); _send_command(0x12); // disable COM left/right remap _send_command(SSD1306_SETVCOMDETECT); _send_command(0x40); // apparently, 0x20 is default... _send_command(SSD1306_MEMORYMODE); _send_command(0x0); // act like KS0108 // left-to-right scan _send_command(SSD1306_SEGREMAP | 0x1); _send_command(SSD1306_COMSCANDEC); _send_command(SSD1306_CHARGEPUMP); _send_command(0x14); // disable, for external 9v 0x10 disable */ // turn it on // on(); } void SSD1306::update() { set_low_column(0); set_high_column(0); set_start_line(0); for (int i = 0; i < 1024; i++) _send_data(_screen[i]); } void SSD1306::set_pixel(int x, int y) { if (x >= SSD1306_LCDWIDTH || y >= SSD1306_LCDHEIGHT) return; _screen[x + (y / 8) * 128] |= 1 << (y % 8); } void SSD1306::clear_pixel(int x, int y) { if (x >= SSD1306_LCDWIDTH || y >= SSD1306_LCDHEIGHT) return; _screen[x + (y / 8) * 128] &= ~(1 << (y % 8)); } void SSD1306::line(int x0, int y0, int x1, int y1) { int steep = abs(y1 - y0) > abs(x1 - x0); int t; if (steep) { t = x0; x0 = y0; y0 = t; t = x1; x1 = y1; y1 = t; } if (x0 > x1) { t = x0; x0 = x1; x1 = t; t = y0; y0 = y1; y1 = t; } int dx, dy; dx = x1 - x0; dy = abs(y1 - y0); int err = dx / 2; int ystep; if (y0 < y1) { ystep = 1; } else { ystep = -1;} for (; x0<x1; x0++) { if (steep) { set_pixel(y0, x0); } else { set_pixel(x0, y0); } err -= dy; if (err < 0) { y0 += ystep; err += dx; } } } void SSD1306::draw_string(char *font, int x, int y, const char *string) { _cursor_x = x; _cursor_y = y; for (int i = 0; i < strlen(string); i++) draw_char(font, _cursor_x, _cursor_y, string[i]); } void SSD1306::draw_char(char *font, int x, int y, char c) { int height = font[FONT_HEIGHT_OFFSET]; int max_width = font[FONT_SIZE_OFFSET]; int char_size_bytes = max_width * height + 1; int char_width = font[(c - FONT_START) * char_size_bytes + FONT_DATA_OFFSET]; for (int i = 0; i < char_width; i++) _screen[(x + i) + (y * SSD1306_LCDWIDTH)] = font[(c - FONT_START) * (char_size_bytes) + i + FONT_DATA_OFFSET + 1]; _cursor_x = x + char_width; _cursor_y = y; } void SSD1306::clear() { for (int i = 0; i < 1024; i++) _screen[i] = 0; } void SSD1306::_send_command(unsigned char code) { _cs = 1; _dc = 0; _cs = 0; _spi.write(code); _cs = 1; } void SSD1306::_send_data(unsigned char value) { _cs = 1; _dc = 1; _cs = 0; _spi.write(value); _cs = 1; }