James Grant
/
NewMobileLCD
MobileLCD.h
- Committer:
- jigr69
- Date:
- 2010-07-02
- Revision:
- 0:9b63dfb366dd
File content as of revision 0:9b63dfb366dd:
#ifndef MBED_MOBILELCD_H #define MBED_MOBILELCD_H #include "mbed.h" class MobileLCD { public: MobileLCD(PinName mosi, PinName miso, PinName clk, PinName cs, PinName rst); void cls(); int width(); int height(); void foreground(int v); void background(int v); void fill(int x, int y, int width, int height, int colour); void reset(); void pixel(int x, int y, int colour); void setpixel(int x, int y, int colour); void setline(int x0, int y0, int x1, int y1, int color); void setrect(int x0, int y0, int x1, int y1, unsigned char fill, int color); void setcircle(int x0, int y0, int radius, int color); void putchar(int x, int y, int size, int value, int fColor, int bColor); void bitblit(int x, int y, int width, int height, const char* bitstream, int fColor, int bColor); protected: SPI _spi; DigitalOut _rst; DigitalOut _cs; void _select(); void _deselect(); void _window(int x, int y, int width, int height); void command(int value); void data(int value); int _foreground, _background, _width, _height; }; #define DISON 0xAF // Display on #define DISOFF 0xAE // Display off #define DISNOR 0xA6 // Normal display #define DISINV 0xA7 // Inverse display #define COMSCN 0xBB // Common scan direction #define DISCTL 0xCA // Display control #define SLPIN 0x95 // Sleep in #define SLPOUT 0x94 // Sleep out #define PASET 0x75 // Page address set #define CASET 0x15 // Column address set #define DATCTL 0xBC // Data scan direction, etc. #define RGBSET8 0xCE // 256-color position set #define RAMWR 0x5C // Writing to memory #define RAMRD 0x5D // Reading from memory #define PTLIN 0xA8 // Partial display in #define PTLOUT 0xA9 // Partial display out #define RMWIN 0xE0 // Read and modify write #define RMWOUT 0xEE // End #define ASCSET 0xAA // Area scroll set #define SCSTART 0xAB // Scroll start set #define OSCON 0xD1 // Internal oscillation on #define OSCOFF 0xD2 // Internal oscillation off #define PWRCTR 0x20 // Power control #define VOLCTR 0x81 // Electronic volume control #define VOLUP 0xD6 // Increment electronic control by 1 #define VOLDOWN 0xD7 // Decrement electronic control by 1 #define TMPGRD 0x82 // Temperature gradient set #define EPCTIN 0xCD // Control EEPROM #define EPCOUT 0xCC // Cancel EEPROM control #define EPMWR 0xFC // Write into EEPROM #define EPMRD 0xFD // Read from EEPROM #define EPSRRD1 0x7C // Read register 1 #define EPSRRD2 0x7D // Read register 2 #define NOP 0x25 // NOP instruction // backlight control #define BKLGHT_LCD_ON 1 #define BKLGHT_LCD_OFF 2 // Booleans #define NOFILL 0 #define FILL 1 #define SMALL 0 #define MEDIUM 1 #define LARGE 2 // mask definitions #define BIT0 0x00000001 #define BIT1 0x00000002 #define BIT2 0x00000004 #define BIT3 0x00000008 #define BIT4 0x00000010 #define BIT5 0x00000020 #define BIT6 0x00000040 #define BIT7 0x00000080 #define BIT8 0x00000100 #define BIT9 0x00000200 #define BIT10 0x00000400 #define BIT11 0x00000800 #define BIT12 0x00001000 #define BIT13 0x00002000 #define BIT14 0x00004000 #define BIT15 0x00008000 #define BIT16 0x00010000 #define BIT17 0x00020000 #define BIT18 0x00040000 #define BIT19 0x00080000 #define BIT20 0x00100000 #define BIT21 0x00200000 #define BIT22 0x00400000 #define BIT23 0x00800000 #define BIT24 0x01000000 #define BIT25 0x02000000 #define BIT26 0x04000000 #define BIT27 0x08000000 #define BIT28 0x10000000 #define BIT29 0x20000000 #define BIT30 0x40000000 #define BIT31 0x80000000 // 12-bit color definitions #define WHITE 0xFFFFFF #define BLACK 0x000000 #define RED 0xFF0000 #define GREEN 0x00FF00 #define BLUE 0x0000FF #define CYAN 0x00FFFF #define MAGENTA 0xFF00FF #define YELLOW 0xFFFF00 #define BROWN 0xBB2222 #define ORANGE 0xFFAA00 #define PINK 0xFF66AA #endif // Lcd_h