Diff: targets/cmsis/TARGET_NXP/TARGET_LPC13XX/TOOLCHAIN_GCC_ARM/startup_LPC13xx.s

Revision:

13:0645d8841f51

Child:

66:64ad953ee6c3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC13XX/TOOLCHAIN_GCC_ARM/startup_LPC13xx.s	Mon Aug 05 14:12:34 2013 +0300
@@ -0,0 +1,209 @@
+/* File: startup_ARMCM3.s
+ * Purpose: startup file for Cortex-M3/M4 devices. Should use with 
+ *   GNU Tools for ARM Embedded Processors
+ * Version: V1.1
+ * Date: 17 June 2011
+ * 
+ * Copyright (C) 2011 ARM Limited. All rights reserved.
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M3/M4 
+ * processor based microcontrollers.  This file can be freely distributed 
+ * within development tools that are supporting such ARM based processors. 
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ */
+    .syntax unified
+    .arch armv7-m
+
+/* Memory Model
+   The HEAP starts at the end of the DATA section and grows upward.
+   
+   The STACK starts at the end of the RAM and grows downward.
+   
+   The HEAP and stack STACK are only checked at compile time:
+   (DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE
+   
+   This is just a check for the bare minimum for the Heap+Stack area before
+   aborting compilation, it is not the run time limit:
+   Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100
+ */
+    .section .stack
+    .align 3
+#ifdef __STACK_SIZE
+    .equ    Stack_Size, __STACK_SIZE
+#else
+    .equ    Stack_Size, 0xc00
+#endif
+    .globl    __StackTop
+    .globl    __StackLimit
+__StackLimit:
+    .space    Stack_Size
+    .size __StackLimit, . - __StackLimit
+__StackTop:
+    .size __StackTop, . - __StackTop
+
+    .section .heap
+    .align 3
+#ifdef __HEAP_SIZE
+    .equ    Heap_Size, __HEAP_SIZE
+#else
+    .equ    Heap_Size, 0x800
+#endif
+    .globl    __HeapBase
+    .globl    __HeapLimit
+__HeapBase:
+    .space    Heap_Size
+    .size __HeapBase, . - __HeapBase
+__HeapLimit:
+    .size __HeapLimit, . - __HeapLimit
+    
+    .section .isr_vector
+    .align 2
+    .globl __isr_vector
+__isr_vector:
+    .long    __StackTop            /* Top of Stack */
+    .long    Reset_Handler         /* Reset Handler */
+    .long    NMI_Handler           /* NMI Handler */
+    .long    HardFault_Handler     /* Hard Fault Handler */
+    .long    MemManage_Handler     /* MPU Fault Handler */
+    .long    BusFault_Handler      /* Bus Fault Handler */
+    .long    UsageFault_Handler    /* Usage Fault Handler */
+    .long    0                     /* Reserved */
+    .long    0                     /* Reserved */
+    .long    0                     /* Reserved */
+    .long    0                     /* Reserved */
+    .long    SVC_Handler           /* SVCall Handler */
+    .long    DebugMon_Handler      /* Debug Monitor Handler */
+    .long    0                     /* Reserved */
+    .long    PendSV_Handler        /* PendSV Handler */
+    .long    SysTick_Handler       /* SysTick Handler */
+
+
+    .long    PIN_INT0_Handler      /* All GPIO pin can be routed to PIN_INTx */
+    .long    PIN_INT1_Handler
+    .long    PIN_INT2_Handler
+    .long    PIN_INT3_Handler
+    .long    PIN_INT4_Handler
+    .long    PIN_INT5_Handler
+    .long    PIN_INT6_Handler
+    .long    PIN_INT7_Handler
+    .long    GINT0_Handler
+    .long    GINT1_Handler         /* PIO0 (0:7) */
+    .long    0
+    .long    0
+    .long    OSTIMER_Handler
+    .long    0
+    .long    SSP1_Handler          /* SSP1 */
+    .long    I2C_Handler           /* I2C */
+    .long    CT16B0_Handler        /* 16-bit Timer0 */
+    .long    CT16B1_Handler        /* 16-bit Timer1 */
+    .long    CT32B0_Handler        /* 32-bit Timer0 */
+    .long    CT32B1_Handler        /* 32-bit Timer1 */
+    .long    SSP0_Handler          /* SSP0 */
+    .long    USART_Handler         /* USART */
+    .long    USB_Handler           /* USB IRQ */
+    .long    USB_FIQHandler        /* USB FIQ */
+    .long    ADC_Handler           /* A/D Converter */
+    .long    WDT_Handler           /* Watchdog timer */
+    .long    BOD_Handler           /* Brown Out Detect */
+    .long    FMC_Handler           /* IP2111 Flash Memory Controller */
+    .long    OSCFAIL_Handler       /* OSC FAIL */
+    .long    PVTCIRCUIT_Handler    /* PVT CIRCUIT */
+    .long    USBWakeup_Handler     /* USB wake up */
+    .long    0
+
+    .size    __isr_vector, . - __isr_vector
+
+    .text
+    .thumb
+    .thumb_func
+    .align 2
+    .globl    Reset_Handler
+    .type    Reset_Handler, %function
+Reset_Handler:
+/*     Loop to copy data from read only memory to RAM. The ranges
+ *      of copy from/to are specified by following symbols evaluated in 
+ *      linker script.
+ *      _etext: End of code section, i.e., begin of data sections to copy from.
+ *      __data_start__/__data_end__: RAM address range that data should be
+ *      copied to. Both must be aligned to 4 bytes boundary.  */
+
+    ldr    r1, =__etext
+    ldr    r2, =__data_start__
+    ldr    r3, =__data_end__
+
+.flash_to_ram_loop:
+    cmp     r2, r3
+    ittt    lt
+    ldrlt   r0, [r1], #4
+    strlt   r0, [r2], #4
+    blt    .flash_to_ram_loop
+
+    ldr    r0, =SystemInit
+    blx    r0
+    ldr    r0, =_start
+    bx    r0
+    .pool
+    .size Reset_Handler, . - Reset_Handler
+    
+/*    Macro to define default handlers. Default handler
+ *    will be weak symbol and just dead loops. They can be
+ *    overwritten by other handlers */
+    .macro    def_default_handler    handler_name
+    .align 1
+    .thumb_func
+    .weak    \handler_name
+    .type    \handler_name, %function
+\handler_name :
+    b    .
+    .size    \handler_name, . - \handler_name
+    .endm
+    
+    def_default_handler    NMI_Handler
+    def_default_handler    HardFault_Handler
+    def_default_handler    MemManage_Handler
+    def_default_handler    BusFault_Handler
+    def_default_handler    UsageFault_Handler
+    def_default_handler    SVC_Handler
+    def_default_handler    DebugMon_Handler
+    def_default_handler    PendSV_Handler
+    def_default_handler    SysTick_Handler
+    def_default_handler    Default_Handler
+
+    def_default_handler    PIN_INT0_Handler
+    def_default_handler    PIN_INT1_Handler
+    def_default_handler    PIN_INT2_Handler
+    def_default_handler    PIN_INT3_Handler
+    def_default_handler    PIN_INT4_Handler
+    def_default_handler    PIN_INT5_Handler
+    def_default_handler    PIN_INT6_Handler
+    def_default_handler    PIN_INT7_Handler
+    def_default_handler    GINT0_Handler
+    def_default_handler    GINT1_Handler
+    def_default_handler    OSTIMER_Handler
+    def_default_handler    SSP1_Handler
+    def_default_handler    I2C_Handler
+    def_default_handler    CT16B0_Handler
+    def_default_handler    CT16B1_Handler
+    def_default_handler    CT32B0_Handler
+    def_default_handler    CT32B1_Handler
+    def_default_handler    SSP0_Handler
+    def_default_handler    USART_Handler
+    def_default_handler    USB_Handler
+    def_default_handler    USB_FIQHandler
+    def_default_handler    ADC_Handler
+    def_default_handler    WDT_Handler
+    def_default_handler    BOD_Handler
+    def_default_handler    FMC_Handler
+    def_default_handler    OSCFAIL_Handler
+    def_default_handler    PVTCIRCUIT_Handler
+    def_default_handler    USBWakeup_Handler
+
+    .weak    DEF_IRQHandler
+    .set    DEF_IRQHandler, Default_Handler
+
+    .end
+