File content as of revision 0:1063a091a062:

/**
 * @file    : lpc17xx_timer.h
 * @brief    : Contains all functions support for Timer firmware library on LPC17xx
 * @version    : 1.0
 * @date    : 14. April. 2009
 * @author    : HieuNguyen
 **************************************************************************
 * Software that is described herein is for illustrative purposes only
 * which provides customers with programming information regarding the
 * products. This software is supplied "AS IS" without any warranties.
 * NXP Semiconductors assumes no responsibility or liability for the
 * use of the software, conveys no license or title under any patent,
 * copyright, or mask work right to the product. NXP Semiconductors
 * reserves the right to make changes in the software without
 * notification. NXP Semiconductors also make no representation or
 * warranty that such application will be suitable for the specified
 * use without further testing or modification.
 **********************************************************************/

/* Peripheral group ----------------------------------------------------------- */
/** @defgroup TIM
 * @ingroup LPC1700CMSIS_FwLib_Drivers
 * @{
 */

#ifndef __LPC17XX_TIMER_H_
#define __LPC17XX_TIMER_H_

/* Includes ------------------------------------------------------------------- */
#include "cmsis.h"
#include "lpc_types.h"


/* Private Macros ------------------------------------------------------------- */
/** @defgroup TIM_Private_Macros
 * @{
 */

/************************** TIMER/COUNTER Control **************************/
/** @defgroup TIM_REGISTER_BIT_DEFINITION
 * @{
 */

/**********************************************************************
** Interrupt information
**********************************************************************/
/** Macro to clean interrupt pending */
#define TIM_IR_CLR(n) _BIT(n)

/**********************************************************************
** Timer interrupt register definitions
**********************************************************************/
/** Macro for getting a timer match interrupt bit */
#define TIM_MATCH_INT(n)        (_BIT(n & 0x0F))
/** Macro for getting a capture event interrupt bit */
#define TIM_CAP_INT(n)     (_BIT(((n & 0x0F) + 4)))

/**********************************************************************
* Timer control register definitions
**********************************************************************/
/** Timer/counter enable bit */
#define TIM_ENABLE            ((uint32_t)(1<<0))
/** Timer/counter reset bit */
#define TIM_RESET            ((uint32_t)(1<<1))
/** Timer control bit mask */
#define TIM_TCR_MASKBIT        ((uint32_t)(3))

/**********************************************************************
* Timer match control register definitions
**********************************************************************/
/** Bit location for interrupt on MRx match, n = 0 to 3 */
#define TIM_INT_ON_MATCH(n)          (_BIT((n * 3)))
/** Bit location for reset on MRx match, n = 0 to 3 */
#define TIM_RESET_ON_MATCH(n)        (_BIT(((n * 3) + 1)))
/** Bit location for stop on MRx match, n = 0 to 3 */
#define TIM_STOP_ON_MATCH(n)         (_BIT(((n * 3) + 2)))
/** Timer Match control bit mask */
#define TIM_MCR_MASKBIT               ((uint32_t)(0x0FFF))
/** Timer Match control bit mask for specific channel*/
#define    TIM_MCR_CHANNEL_MASKBIT(n)        ((uint32_t)(7<<n))
/**********************************************************************
* Timer capture control register definitions
**********************************************************************/
/** Bit location for CAP.n on CRx rising edge, n = 0 to 3 */
#define TIM_CAP_RISING(n)       (_BIT((n * 3)))
/** Bit location for CAP.n on CRx falling edge, n = 0 to 3 */
#define TIM_CAP_FALLING(n)       (_BIT(((n * 3) + 1)))
/** Bit location for CAP.n on CRx interrupt enable, n = 0 to 3 */
#define TIM_INT_ON_CAP(n)        (_BIT(((n * 3) + 2)))
/** Mask bit for rising and falling edge bit */
#define TIM_EDGE_MASK(n)        (_SBF((n * 3), 0x03))
/** Timer capture control bit mask */
#define TIM_CCR_MASKBIT            ((uint32_t)(0x3F))
/** Timer Capture control bit mask for specific channel*/
#define    TIM_CCR_CHANNEL_MASKBIT(n)        ((uint32_t)(7<<n))

/**********************************************************************
* Timer external match register definitions
**********************************************************************/
/** Bit location for output state change of MAT.n when external match
   happens, n = 0 to 3 */
#define TIM_EM(n)                _BIT(n)
/** Output state change of MAT.n when external match happens: no change */
#define TIM_EM_NOTHING        ((uint8_t)(0x0))
/** Output state change of MAT.n when external match happens: low */
#define TIM_EM_LOW             ((uint8_t)(0x1))
/** Output state change of MAT.n when external match happens: high */
#define TIM_EM_HIGH            ((uint8_t)(0x2))
/** Output state change of MAT.n when external match happens: toggle */
#define TIM_EM_TOGGLE          ((uint8_t)(0x3))
/** Macro for setting for the MAT.n change state bits */
#define TIM_EM_SET(n,s)     (_SBF(((n << 1) + 4), (s & 0x03)))
/** Mask for the MAT.n change state bits */
#define TIM_EM_MASK(n)         (_SBF(((n << 1) + 4), 0x03))
/** Timer external match bit mask */
#define TIM_EMR_MASKBIT    0x0FFF
/**********************************************************************
* Timer Count Control Register definitions
**********************************************************************/
/** Mask to get the Counter/timer mode bits */
#define TIM_CTCR_MODE_MASK  0x3
/** Mask to get the count input select bits */
#define TIM_CTCR_INPUT_MASK 0xC
/** Timer Count control bit mask */
#define TIM_CTCR_MASKBIT    0xF
#define TIM_COUNTER_MODE ((uint8_t)(1))

/**
 * @}
 */

/**
 * @}
 */


/* Public Types --------------------------------------------------------------- */
/** @defgroup TIM_Public_Types
 * @{
 */

/***********************************************************************
 * Timer device enumeration
**********************************************************************/
/** @brief interrupt  type */
typedef enum
{
    TIM_MR0_INT =0, /*!< interrupt for Match channel 0*/
    TIM_MR1_INT =1, /*!< interrupt for Match channel 1*/
    TIM_MR2_INT =2, /*!< interrupt for Match channel 2*/
    TIM_MR3_INT =3, /*!< interrupt for Match channel 3*/
    TIM_CR0_INT =4, /*!< interrupt for Capture channel 0*/
    TIM_CR1_INT =5, /*!< interrupt for Capture channel 1*/
}TIM_INT_TYPE;
#define PARAM_TIM_INT_TYPE(TYPE)    ((TYPE ==TIM_MR0_INT)||(TYPE ==TIM_MR1_INT)\
||(TYPE ==TIM_MR2_INT)||(TYPE ==TIM_MR3_INT)\
||(TYPE ==TIM_CR0_INT)||(TYPE ==TIM_CR1_INT))

/** @brief Timer/counter operating mode */
typedef enum
{
    TIM_TIMER_MODE = 0,                /*!< Timer mode */
    TIM_COUNTER_RISING_MODE,        /*!< Counter rising mode */
    TIM_COUNTER_FALLING_MODE,        /*!< Counter falling mode */
    TIM_COUNTER_ANY_MODE            /*!< Counter on both edges */
} TIM_MODE_OPT;
#define PARAM_TIM_MODE_OPT(MODE)    ((MODE == TIM_TIMER_MODE)||(MODE == TIM_COUNTER_RISING_MODE)\
|| (MODE == TIM_COUNTER_RISING_MODE)||(MODE == TIM_COUNTER_RISING_MODE))
/** @brief Timer/Counter prescale option */
typedef enum
{
    TIM_PRESCALE_TICKVAL = 0,        /*!< Prescale in absolute value */
    TIM_PRESCALE_USVAL                /*!< Prescale in microsecond value */
} TIM_PRESCALE_OPT;
#define PARAM_TIM_PRESCALE_OPT(OPT)    ((OPT == TIM_PRESCALE_TICKVAL)||(OPT == TIM_PRESCALE_USVAL))
/** @brief Counter input option */
typedef enum
{
    TIM_COUNTER_INCAP0 = 0,            /*!< CAPn.0 input pin for TIMERn */
    TIM_COUNTER_INCAP1,                /*!< CAPn.1 input pin for TIMERn */
} TIM_COUNTER_INPUT_OPT;
#define PARAM_TIM_COUNTER_INPUT_OPT(OPT)    ((OPT == TIM_COUNTER_INCAP0)||(OPT == TIM_COUNTER_INCAP1))

/** @brief Timer/Counter external match option */
typedef enum
{
    TIM_EXTMATCH_NOTHING = 0,        /*!< Do nothing for external output pin if match */
    TIM_EXTMATCH_LOW,                /*!< Force external output pin to low if match */
    TIM_EXTMATCH_HIGH,                /*!< Force external output pin to high if match */
    TIM_EXTMATCH_TOGGLE                /*!< Toggle external output pin if match */
}TIM_EXTMATCH_OPT;
#define PARAM_TIM_EXTMATCH_OPT(OPT)    ((OPT == TIM_EXTMATCH_NOTHING)||(OPT == TIM_EXTMATCH_LOW)\
||(OPT == TIM_EXTMATCH_HIGH)||(OPT == TIM_EXTMATCH_TOGGLE))

/** @brief Timer/counter capture mode options */
typedef enum {
    TIM_CAPTURE_NONE = 0,    /*!< No Capture */
    TIM_CAPTURE_RISING,        /*!< Rising capture mode */
    TIM_CAPTURE_FALLING,    /*!< Falling capture mode */
    TIM_CAPTURE_ANY            /*!< On both edges */
} TIM_CAP_MODE_OPT;

#define PARAM_TIM_CAP_MODE_OPT(OPT)    ((OPT == TIM_CAPTURE_NONE)||(OPT == TIM_CAPTURE_RISING) \
||(OPT == TIM_CAPTURE_FALLING)||(OPT == TIM_CAPTURE_ANY))

/** @brief Configuration structure in TIMER mode */
typedef struct
{

    uint8_t PrescaleOption;        /**< Timer Prescale option, should be:
                                    - TIM_PRESCALE_TICKVAL: Prescale in absolute value
                                    - TIM_PRESCALE_USVAL: Prescale in microsecond value
                                    */
    uint8_t Reserved[3];        /**< Reserved */
    uint32_t PrescaleValue;        /**< Prescale value */
} TIM_TIMERCFG_Type;

/** @brief Configuration structure in COUNTER mode */
typedef struct {

    uint8_t CounterOption;        /**< Counter Option, should be:
                                - TIM_COUNTER_INCAP0: CAPn.0 input pin for TIMERn
                                - TIM_COUNTER_INCAP1: CAPn.1 input pin for TIMERn
                                */
    uint8_t CountInputSelect;
    uint8_t Reserved[2];
} TIM_COUNTERCFG_Type;

/** @brief Match channel configuration structure */
typedef struct {
    uint8_t MatchChannel;    /**< Match channel, should be in range
                            from 0..3 */
    uint8_t IntOnMatch;        /**< Interrupt On match, should be:
                            - ENABLE: Enable this function.
                            - DISABLE: Disable this function.
                            */
    uint8_t StopOnMatch;    /**< Stop On match, should be:
                            - ENABLE: Enable this function.
                            - DISABLE: Disable this function.
                            */
    uint8_t ResetOnMatch;    /**< Reset On match, should be:
                            - ENABLE: Enable this function.
                            - DISABLE: Disable this function.
                            */

    uint8_t ExtMatchOutputType;    /**< External Match Output type, should be:
                             -     0:    Do nothing for external output pin if match
                             -   1:    Force external output pin to low if match
                             -      2: Force external output pin to high if match
                             -   3: Toggle external output pin if match.
                            */
    uint8_t Reserved[3];    /** Reserved */
    uint32_t MatchValue;    /** Match value */
} TIM_MATCHCFG_Type;


/** @brief Capture Input configuration structure */
typedef struct {
    uint8_t CaptureChannel;    /**< Capture channel, should be in range
                            from 0..1 */
    uint8_t RisingEdge;        /**< caption rising edge, should be:
                            - ENABLE: Enable rising edge.
                            - DISABLE: Disable this function.
                            */
    uint8_t FallingEdge;        /**< caption falling edge, should be:
                            - ENABLE: Enable falling edge.
                            - DISABLE: Disable this function.
                                */
    uint8_t IntOnCaption;    /**< Interrupt On caption, should be:
                            - ENABLE: Enable interrupt function.
                            - DISABLE: Disable this function.
                            */

} TIM_CAPTURECFG_Type;

/**
 * @}
 */


/* Public Macros -------------------------------------------------------------- */
/** @defgroup TIM_Public_Macros
 * @{
 */

/** Macro to determine if it is valid TIMER peripheral */
#define PARAM_TIMx(n)    ((((uint32_t *)n)==((uint32_t *)LPC_TIM0)) || (((uint32_t *)n)==((uint32_t *)LPC_TIM1)) \
|| (((uint32_t *)n)==((uint32_t *)LPC_TIM2)) || (((uint32_t *)n)==((uint32_t *)LPC_TIM3)))

/**
 * @}
 */


/* Public Functions ----------------------------------------------------------- */
/** @defgroup TIM_Public_Functions
 * @{
 */

FlagStatus TIM_GetIntStatus(LPC_TIM_TypeDef *TIMx, uint8_t IntFlag);
FlagStatus TIM_GetIntCaptureStatus(LPC_TIM_TypeDef *TIMx, uint8_t IntFlag);
void TIM_ClearIntPending(LPC_TIM_TypeDef *TIMx, uint8_t IntFlag);
void TIM_ClearIntCapturePending(LPC_TIM_TypeDef *TIMx, uint8_t IntFlag);
void TIM_Cmd(LPC_TIM_TypeDef *TIMx, FunctionalState NewState);
void TIM_ResetCounter(LPC_TIM_TypeDef *TIMx);
void TIM_Init(LPC_TIM_TypeDef *TIMx, uint8_t TimerCounterMode, void *TIM_ConfigStruct);
void TIM_DeInit(LPC_TIM_TypeDef *TIMx);
void TIM_ConfigStructInit(uint8_t TimerCounterMode, void *TIM_ConfigStruct);
void TIM_ConfigMatch(LPC_TIM_TypeDef *TIMx, TIM_MATCHCFG_Type *TIM_MatchConfigStruct);
void TIM_SetMatchExt(LPC_TIM_TypeDef *TIMx,TIM_EXTMATCH_OPT ext_match );
void TIM_ConfigCapture(LPC_TIM_TypeDef *TIMx, TIM_CAPTURECFG_Type *TIM_CaptureConfigStruct);
uint32_t TIM_GetCaptureValue(LPC_TIM_TypeDef *TIMx, uint8_t CaptureChannel);

/**
 * @}
 */

#endif /* __LPC17XX_TIMER_H_ */

/**
 * @}
 */

/* --------------------------------- End Of File ------------------------------ */