Shows how to use a display, the onboard SD Card and the onboard SPI Flash. Requires a display module with direct Arduino pinning

Dependencies:   DmTftLibrary SDFileSystem mbed

main.cpp

Committer:
displaymodule
Date:
2014-05-20
Revision:
0:3ecd25651727
Child:
1:76ec0e6dfe81

File content as of revision 0:3ecd25651727:

/**********************************************************************************************
 Copyright (c) 2014 DisplayModule. All rights reserved.

 Redistribution and use of this source code, part of this source code or any compiled binary
 based on this source code is permitted as long as the above copyright notice and following
 disclaimer is retained.

 DISCLAIMER:
 THIS SOFTWARE IS SUPPLIED "AS IS" WITHOUT ANY WARRANTIES AND SUPPORT. DISPLAYMODULE ASSUMES
 NO RESPONSIBILITY OR LIABILITY FOR THE USE OF THE SOFTWARE.
 ********************************************************************************************/

/******************************************************************************
 * Includes
 *****************************************************************************/

#include "mbed.h"

#include "DmTftHX8353C.h"
#include "DmTftS6D0164.h"
#include "DmTftIli9325.h"
#include "DmTftIli9341.h"
#include "DmTftSsd2119.h"
#include "DmTouch.h"

#include "W25Q16BV.h"
#include "DmDrawBmpBase.h"
#include "SDFileSystem.h"

/******************************************************************************
 * Typedefs and defines
 *****************************************************************************/

#define log(...) printf(__VA_ARGS__)
//#define log(...)

#define DM_PIN_SPI_MOSI   D11
#define DM_PIN_SPI_MISO   D12
#define DM_PIN_SPI_SCLK   D13

#define DM_PIN_CS_TOUCH   D4
#define DM_PIN_CS_TFT     D10
#define DM_PIN_CS_SDCARD  D8
#define DM_PIN_CS_FLASH   D6

/******************************************************************************
 * Local variables
 *****************************************************************************/

//DmTftHX8353C tft;  /* DM_TFT18_101 */
//DmTftS6D0164 tft;  /* DM_TFT22_102 */
//DmTftIli9325 tft;  /* DM_TFT28_103 and DM_TFT24_104 */
DmTftIli9341 tft;  /* DM_TFT28_105 */
//DmTftSsd2119 tft;   /* DM_TFT35_107 */

//DmTouch touch(DmTouch::DM_TFT28_103, false); /* For LPC4088 QuickStart Board */
//DmTouch touch(DmTouch::DM_TFT28_103);
//DmTouch touch(DmTouch::DM_TFT24_104);
DmTouch touch(DmTouch::DM_TFT28_105);
//DmTouch touch(DmTouch::DM_TFT35_107);

SDFileSystem sd(DM_PIN_SPI_MOSI, DM_PIN_SPI_MISO, DM_PIN_SPI_SCLK, DM_PIN_CS_SDCARD, "sd"); // mosi,miso,clk,cs
W25Q16BV flash(DM_PIN_SPI_MOSI, DM_PIN_SPI_MISO, DM_PIN_SPI_SCLK, DM_PIN_CS_FLASH); // mosi,miso,clk,cs

DigitalInOut csTouch(DM_PIN_CS_TOUCH, PIN_OUTPUT, PullUp, 1);
DigitalInOut csDisplay(DM_PIN_CS_TFT, PIN_OUTPUT, PullUp, 1);
DigitalInOut csSDCard(DM_PIN_CS_SDCARD, PIN_OUTPUT, PullUp, 1);
DigitalInOut csFlash(DM_PIN_CS_FLASH, PIN_OUTPUT, PullUp, 1);

/******************************************************************************
 * Global variables
 *****************************************************************************/

/******************************************************************************
 * Local functions
 *****************************************************************************/

static bool sdcardReader(uint32_t userData, uint8_t* data, int offset, int numBytes) {
  FILE* fp = (FILE*)userData;
  fseek(fp, offset, SEEK_SET);
  fread(data, 1, numBytes, fp);
  return true;
}

static bool spiFlashReader(uint32_t userData, uint8_t* data, int offset, int numBytes) {
  W25Q16BV* spiFlash = (W25Q16BV*)userData;
  spiFlash->readStream(offset, (char*)data, numBytes);
  return true;
}

static void copyImageToSPIFlash(const char* fname) {
  FILE* fp = fopen(fname, "r");
  int num, offset;
  uint8_t buff[128];
  
  do {
    if (fp == NULL) {
      log("Failed to open %s, so assuming SPI flash is correct\n", fname);
      break;
    } 
  
    // simple comparison of first 64 bytes in file and SPI flash
    // to avoid having to write to the flash on every boot
    num = fread(buff, 1, 64, fp);
    if (num == 64) {
      flash.readStream(0, (char*)&buff[64], 64);
      if (memcmp(buff, &buff[64], 64) == 0) {
        log("SPI flash content propably correct, not replacing it\n");
        break;
      }
    }
    
    log("Found %s, erasing SPI flash\n", fname);
    flash.chipErase();

    log("Copying %s to SPI flash\n", fname);
    offset = 0;
    while ((num = fread(buff, 1, 128, fp)) > 0) {
      flash.writeStream(offset, (char*)buff, num);
      offset+=num;
    }
    log("Done. Wrote %d bytes to SPI flash\n", offset);
    
  } while(false);
  
  if (fp != NULL) {
    fclose(fp);
  }
}

/******************************************************************************
 * Main
 *****************************************************************************/

int main() {
  //DmTftBase* tft = factory.display();
  DmDrawBmpBase bmp;
  const char* fname = "/sd/logop565.bmp";

  copyImageToSPIFlash(fname);
  
  log("init tft \r\n");
  tft.init();
  
  while (true) {
    log("Drawing from SD card (%s) ...\n", fname);
    FILE *fp = fopen(fname, "r");
    if (fp != NULL) {
      bmp.drawBitmap(tft, 0, 0, sdcardReader, (uint32_t)fp);
      fclose(fp);
    } else {
      log("failed to open file\n");
    }

    wait_ms(3000);
    tft.clearScreen(RED);
    wait_ms(1000);

    log("Attempting to decode image from SPI flash...\n");
    bmp.drawBitmap(tft, 0, 0, spiFlashReader, (uint32_t)&flash);

    wait_ms(3000);
    tft.clearScreen(GREEN);
    wait_ms(1000);
  }
}