David Fletcher
TI's CC3100. A test demo with very little testing done!
simplelink/cc3100_user.h@7:0687d16b9781, 2015-09-03 (annotated)
- Committer:
- dflet
- Date:
- Thu Sep 03 13:43:50 2015 +0000
- Revision:
- 7:0687d16b9781
- Parent:
- 6:778b081f6a13
Oooops SPI mode change from 1 to 0. Must be some clock skew to get away with that! Other updates.
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| dflet | 6:778b081f6a13 | 1 | /* |
| dflet | 6:778b081f6a13 | 2 | * user.h - CC31xx/CC32xx Host Driver Implementation |
| dflet | 6:778b081f6a13 | 3 | * |
| dflet | 6:778b081f6a13 | 4 | * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ |
| dflet | 6:778b081f6a13 | 5 | * |
| dflet | 6:778b081f6a13 | 6 | * |
| dflet | 6:778b081f6a13 | 7 | * Redistribution and use in source and binary forms, with or without |
| dflet | 6:778b081f6a13 | 8 | * modification, are permitted provided that the following conditions |
| dflet | 6:778b081f6a13 | 9 | * are met: |
| dflet | 6:778b081f6a13 | 10 | * |
| dflet | 6:778b081f6a13 | 11 | * Redistributions of source code must retain the above copyright |
| dflet | 6:778b081f6a13 | 12 | * notice, this list of conditions and the following disclaimer. |
| dflet | 6:778b081f6a13 | 13 | * |
| dflet | 6:778b081f6a13 | 14 | * Redistributions in binary form must reproduce the above copyright |
| dflet | 6:778b081f6a13 | 15 | * notice, this list of conditions and the following disclaimer in the |
| dflet | 6:778b081f6a13 | 16 | * documentation and/or other materials provided with the |
| dflet | 6:778b081f6a13 | 17 | * distribution. |
| dflet | 6:778b081f6a13 | 18 | * |
| dflet | 6:778b081f6a13 | 19 | * Neither the name of Texas Instruments Incorporated nor the names of |
| dflet | 6:778b081f6a13 | 20 | * its contributors may be used to endorse or promote products derived |
| dflet | 6:778b081f6a13 | 21 | * from this software without specific prior written permission. |
| dflet | 6:778b081f6a13 | 22 | * |
| dflet | 6:778b081f6a13 | 23 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| dflet | 6:778b081f6a13 | 24 | * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| dflet | 6:778b081f6a13 | 25 | * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| dflet | 6:778b081f6a13 | 26 | * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| dflet | 6:778b081f6a13 | 27 | * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| dflet | 6:778b081f6a13 | 28 | * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| dflet | 6:778b081f6a13 | 29 | * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| dflet | 6:778b081f6a13 | 30 | * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| dflet | 6:778b081f6a13 | 31 | * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| dflet | 6:778b081f6a13 | 32 | * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| dflet | 6:778b081f6a13 | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| dflet | 6:778b081f6a13 | 34 | * |
| dflet | 6:778b081f6a13 | 35 | */ |
| dflet | 6:778b081f6a13 | 36 | |
| dflet | 6:778b081f6a13 | 37 | |
| dflet | 6:778b081f6a13 | 38 | #ifndef USER_H_ |
| dflet | 6:778b081f6a13 | 39 | #define USER_H_ |
| dflet | 6:778b081f6a13 | 40 | |
| dflet | 6:778b081f6a13 | 41 | /*! |
| dflet | 6:778b081f6a13 | 42 | |
| dflet | 6:778b081f6a13 | 43 | \addtogroup Porting |
| dflet | 6:778b081f6a13 | 44 | @{ |
| dflet | 6:778b081f6a13 | 45 | |
| dflet | 6:778b081f6a13 | 46 | */ |
| dflet | 6:778b081f6a13 | 47 | |
| dflet | 6:778b081f6a13 | 48 | /*! |
| dflet | 6:778b081f6a13 | 49 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 50 | |
| dflet | 6:778b081f6a13 | 51 | \defgroup porting_user_include User Include Files |
| dflet | 6:778b081f6a13 | 52 | |
| dflet | 6:778b081f6a13 | 53 | This section IS NOT REQUIRED in case user provided primitives are handled |
| dflet | 6:778b081f6a13 | 54 | in makefiles or project configurations (IDE) |
| dflet | 6:778b081f6a13 | 55 | |
| dflet | 6:778b081f6a13 | 56 | PORTING ACTION: |
| dflet | 6:778b081f6a13 | 57 | - Include all required header files for the definition of: |
| dflet | 6:778b081f6a13 | 58 | -# Transport layer library API (e.g. SPI, UART) |
| dflet | 6:778b081f6a13 | 59 | -# OS primitives definitions (e.g. Task spawn, Semaphores) |
| dflet | 6:778b081f6a13 | 60 | -# Memory management primitives (e.g. alloc, free) |
| dflet | 6:778b081f6a13 | 61 | |
| dflet | 6:778b081f6a13 | 62 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 63 | */ |
| dflet | 6:778b081f6a13 | 64 | |
| dflet | 6:778b081f6a13 | 65 | #include <string.h> |
| dflet | 6:778b081f6a13 | 66 | |
| dflet | 6:778b081f6a13 | 67 | #ifndef SL_IF_TYPE_UART |
| dflet | 6:778b081f6a13 | 68 | #include "cc3100_spi.h" |
| dflet | 6:778b081f6a13 | 69 | #else |
| dflet | 6:778b081f6a13 | 70 | #include "uart.h" |
| dflet | 6:778b081f6a13 | 71 | #endif |
| dflet | 6:778b081f6a13 | 72 | |
| dflet | 6:778b081f6a13 | 73 | |
| dflet | 6:778b081f6a13 | 74 | /*! |
| dflet | 6:778b081f6a13 | 75 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 76 | |
| dflet | 6:778b081f6a13 | 77 | \defgroup porting_capabilities Capability Set Definition |
| dflet | 6:778b081f6a13 | 78 | |
| dflet | 6:778b081f6a13 | 79 | This section IS NOT REQUIRED in case one of the following pre defined |
| dflet | 6:778b081f6a13 | 80 | capabilities set is in use: |
| dflet | 6:778b081f6a13 | 81 | - SL_TINY |
| dflet | 6:778b081f6a13 | 82 | - SL_SMALL |
| dflet | 6:778b081f6a13 | 83 | - SL_FULL |
| dflet | 6:778b081f6a13 | 84 | |
| dflet | 6:778b081f6a13 | 85 | PORTING ACTION: |
| dflet | 6:778b081f6a13 | 86 | - Define one of the pre-defined capabilities set or uncomment the |
| dflet | 6:778b081f6a13 | 87 | relevant definitions below to select the required capabilities |
| dflet | 6:778b081f6a13 | 88 | in order to "install" external SimpleLink library one should follow the next steps: |
| dflet | 6:778b081f6a13 | 89 | 1. Include the external library API header file (i.e. #include "IOT.h") |
| dflet | 6:778b081f6a13 | 90 | 2. Define each one of the desired external lib with one (out of 5) of the following: |
| dflet | 6:778b081f6a13 | 91 | #define SL_EXT_LIB_1 <Your external lib name> |
| dflet | 6:778b081f6a13 | 92 | #define SL_EXT_LIB_2 <Your external lib name> |
| dflet | 6:778b081f6a13 | 93 | #define SL_EXT_LIB_3 <Your external lib name> |
| dflet | 6:778b081f6a13 | 94 | #define SL_EXT_LIB_4 <Your external lib name> |
| dflet | 6:778b081f6a13 | 95 | #define SL_EXT_LIB_5 <Your external lib name> |
| dflet | 6:778b081f6a13 | 96 | @{ |
| dflet | 6:778b081f6a13 | 97 | ******************************************************************************* |
| dflet | 6:778b081f6a13 | 98 | */ |
| dflet | 6:778b081f6a13 | 99 | |
| dflet | 6:778b081f6a13 | 100 | #define SL_FULL |
| dflet | 6:778b081f6a13 | 101 | |
| dflet | 6:778b081f6a13 | 102 | /*! |
| dflet | 6:778b081f6a13 | 103 | \def MAX_CONCURRENT_ACTIONS |
| dflet | 6:778b081f6a13 | 104 | |
| dflet | 6:778b081f6a13 | 105 | \brief Defines the maximum number of concurrent action in the system |
| dflet | 6:778b081f6a13 | 106 | Min:1 , Max: 32 |
| dflet | 6:778b081f6a13 | 107 | |
| dflet | 6:778b081f6a13 | 108 | Actions which has async events as return, can be |
| dflet | 6:778b081f6a13 | 109 | |
| dflet | 6:778b081f6a13 | 110 | \sa |
| dflet | 6:778b081f6a13 | 111 | |
| dflet | 6:778b081f6a13 | 112 | \note In case there are not enough resources for the actions needed in the system, |
| dflet | 6:778b081f6a13 | 113 | error is received: POOL_IS_EMPTY |
| dflet | 6:778b081f6a13 | 114 | one option is to increase MAX_CONCURRENT_ACTIONS |
| dflet | 6:778b081f6a13 | 115 | (improves performance but results in memory consumption) |
| dflet | 6:778b081f6a13 | 116 | Other option is to call the API later (decrease performance) |
| dflet | 6:778b081f6a13 | 117 | |
| dflet | 6:778b081f6a13 | 118 | \warning In case of setting to one, recommend to use non-blocking recv\recvfrom to allow |
| dflet | 6:778b081f6a13 | 119 | multiple socket recv |
| dflet | 6:778b081f6a13 | 120 | */ |
| dflet | 6:778b081f6a13 | 121 | #ifndef SL_TINY_EXT |
| dflet | 6:778b081f6a13 | 122 | #define MAX_CONCURRENT_ACTIONS 10 |
| dflet | 6:778b081f6a13 | 123 | #else |
| dflet | 6:778b081f6a13 | 124 | #define MAX_CONCURRENT_ACTIONS 1 |
| dflet | 6:778b081f6a13 | 125 | #endif |
| dflet | 6:778b081f6a13 | 126 | |
| dflet | 6:778b081f6a13 | 127 | /*! |
| dflet | 6:778b081f6a13 | 128 | \def CPU_FREQ_IN_MHZ |
| dflet | 6:778b081f6a13 | 129 | \brief Defines CPU frequency for Host side, for better accuracy of busy loops, if any |
| dflet | 6:778b081f6a13 | 130 | \sa |
| dflet | 6:778b081f6a13 | 131 | \note |
| dflet | 6:778b081f6a13 | 132 | |
| dflet | 6:778b081f6a13 | 133 | \warning If not set the default CPU frequency is set to 200MHz |
| dflet | 6:778b081f6a13 | 134 | This option will be deprecated in future release |
| dflet | 6:778b081f6a13 | 135 | */ |
| dflet | 6:778b081f6a13 | 136 | /* |
| dflet | 6:778b081f6a13 | 137 | #define CPU_FREQ_IN_MHZ 25 |
| dflet | 6:778b081f6a13 | 138 | */ |
| dflet | 6:778b081f6a13 | 139 | |
| dflet | 6:778b081f6a13 | 140 | |
| dflet | 6:778b081f6a13 | 141 | /*! |
| dflet | 6:778b081f6a13 | 142 | \def SL_INC_ARG_CHECK |
| dflet | 6:778b081f6a13 | 143 | |
| dflet | 6:778b081f6a13 | 144 | \brief Defines whether the SimpleLink driver perform argument check |
| dflet | 6:778b081f6a13 | 145 | or not |
| dflet | 6:778b081f6a13 | 146 | |
| dflet | 6:778b081f6a13 | 147 | When defined, the SimpleLink driver perform argument check on |
| dflet | 6:778b081f6a13 | 148 | function call. Removing this define could reduce some code |
| dflet | 6:778b081f6a13 | 149 | size and improve slightly the performances but may impact in |
| dflet | 6:778b081f6a13 | 150 | unpredictable behaviour in case of invalid arguments |
| dflet | 6:778b081f6a13 | 151 | |
| dflet | 6:778b081f6a13 | 152 | \sa |
| dflet | 6:778b081f6a13 | 153 | |
| dflet | 6:778b081f6a13 | 154 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 155 | |
| dflet | 6:778b081f6a13 | 156 | \warning Removing argument check may cause unpredictable behaviour in |
| dflet | 6:778b081f6a13 | 157 | case of invalid arguments. |
| dflet | 6:778b081f6a13 | 158 | In this case the user is responsible to argument validity |
| dflet | 6:778b081f6a13 | 159 | (for example all handlers must not be NULL) |
| dflet | 6:778b081f6a13 | 160 | */ |
| dflet | 6:778b081f6a13 | 161 | #define SL_INC_ARG_CHECK |
| dflet | 6:778b081f6a13 | 162 | |
| dflet | 6:778b081f6a13 | 163 | |
| dflet | 6:778b081f6a13 | 164 | /*! |
| dflet | 6:778b081f6a13 | 165 | \def SL_INC_STD_BSD_API_NAMING |
| dflet | 6:778b081f6a13 | 166 | |
| dflet | 6:778b081f6a13 | 167 | \brief Defines whether SimpleLink driver should expose standard BSD |
| dflet | 6:778b081f6a13 | 168 | APIs or not |
| dflet | 6:778b081f6a13 | 169 | |
| dflet | 6:778b081f6a13 | 170 | When defined, the SimpleLink driver in addition to its alternative |
| dflet | 6:778b081f6a13 | 171 | BSD APIs expose also standard BSD APIs. |
| dflet | 6:778b081f6a13 | 172 | Standard BSD API includes the following functions: |
| dflet | 6:778b081f6a13 | 173 | socket , close , accept , bind , listen , connect , select , |
| dflet | 6:778b081f6a13 | 174 | setsockopt , getsockopt , recv , recvfrom , write , send , sendto , |
| dflet | 6:778b081f6a13 | 175 | gethostbyname |
| dflet | 6:778b081f6a13 | 176 | |
| dflet | 6:778b081f6a13 | 177 | \sa |
| dflet | 6:778b081f6a13 | 178 | |
| dflet | 6:778b081f6a13 | 179 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 180 | |
| dflet | 6:778b081f6a13 | 181 | \warning |
| dflet | 6:778b081f6a13 | 182 | */ |
| dflet | 6:778b081f6a13 | 183 | |
| dflet | 6:778b081f6a13 | 184 | #define SL_INC_STD_BSD_API_NAMING |
| dflet | 6:778b081f6a13 | 185 | |
| dflet | 6:778b081f6a13 | 186 | |
| dflet | 6:778b081f6a13 | 187 | /*! |
| dflet | 6:778b081f6a13 | 188 | \brief Defines whether to include extended API in SimpleLink driver |
| dflet | 6:778b081f6a13 | 189 | or not |
| dflet | 6:778b081f6a13 | 190 | |
| dflet | 6:778b081f6a13 | 191 | When defined, the SimpleLink driver will include also all |
| dflet | 6:778b081f6a13 | 192 | extended API of the included packages |
| dflet | 6:778b081f6a13 | 193 | |
| dflet | 6:778b081f6a13 | 194 | \sa ext_api |
| dflet | 6:778b081f6a13 | 195 | |
| dflet | 6:778b081f6a13 | 196 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 197 | |
| dflet | 6:778b081f6a13 | 198 | \warning |
| dflet | 6:778b081f6a13 | 199 | */ |
| dflet | 6:778b081f6a13 | 200 | #define SL_INC_EXT_API |
| dflet | 6:778b081f6a13 | 201 | |
| dflet | 6:778b081f6a13 | 202 | /*! |
| dflet | 6:778b081f6a13 | 203 | \brief Defines whether to include WLAN package in SimpleLink driver |
| dflet | 6:778b081f6a13 | 204 | or not |
| dflet | 6:778b081f6a13 | 205 | |
| dflet | 6:778b081f6a13 | 206 | When defined, the SimpleLink driver will include also |
| dflet | 6:778b081f6a13 | 207 | the WLAN package |
| dflet | 6:778b081f6a13 | 208 | |
| dflet | 6:778b081f6a13 | 209 | \sa |
| dflet | 6:778b081f6a13 | 210 | |
| dflet | 6:778b081f6a13 | 211 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 212 | |
| dflet | 6:778b081f6a13 | 213 | \warning |
| dflet | 6:778b081f6a13 | 214 | */ |
| dflet | 6:778b081f6a13 | 215 | #define SL_INC_WLAN_PKG |
| dflet | 6:778b081f6a13 | 216 | |
| dflet | 6:778b081f6a13 | 217 | /*! |
| dflet | 6:778b081f6a13 | 218 | \brief Defines whether to include SOCKET package in SimpleLink |
| dflet | 6:778b081f6a13 | 219 | driver or not |
| dflet | 6:778b081f6a13 | 220 | |
| dflet | 6:778b081f6a13 | 221 | When defined, the SimpleLink driver will include also |
| dflet | 6:778b081f6a13 | 222 | the SOCKET package |
| dflet | 6:778b081f6a13 | 223 | |
| dflet | 6:778b081f6a13 | 224 | \sa |
| dflet | 6:778b081f6a13 | 225 | |
| dflet | 6:778b081f6a13 | 226 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 227 | |
| dflet | 6:778b081f6a13 | 228 | \warning |
| dflet | 6:778b081f6a13 | 229 | */ |
| dflet | 6:778b081f6a13 | 230 | #define SL_INC_SOCKET_PKG |
| dflet | 6:778b081f6a13 | 231 | |
| dflet | 6:778b081f6a13 | 232 | /*! |
| dflet | 6:778b081f6a13 | 233 | \brief Defines whether to include NET_APP package in SimpleLink |
| dflet | 6:778b081f6a13 | 234 | driver or not |
| dflet | 6:778b081f6a13 | 235 | |
| dflet | 6:778b081f6a13 | 236 | When defined, the SimpleLink driver will include also the |
| dflet | 6:778b081f6a13 | 237 | NET_APP package |
| dflet | 6:778b081f6a13 | 238 | |
| dflet | 6:778b081f6a13 | 239 | \sa |
| dflet | 6:778b081f6a13 | 240 | |
| dflet | 6:778b081f6a13 | 241 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 242 | |
| dflet | 6:778b081f6a13 | 243 | \warning |
| dflet | 6:778b081f6a13 | 244 | */ |
| dflet | 6:778b081f6a13 | 245 | #define SL_INC_NET_APP_PKG |
| dflet | 6:778b081f6a13 | 246 | |
| dflet | 6:778b081f6a13 | 247 | /*! |
| dflet | 6:778b081f6a13 | 248 | \brief Defines whether to include NET_CFG package in SimpleLink |
| dflet | 6:778b081f6a13 | 249 | driver or not |
| dflet | 6:778b081f6a13 | 250 | |
| dflet | 6:778b081f6a13 | 251 | When defined, the SimpleLink driver will include also |
| dflet | 6:778b081f6a13 | 252 | the NET_CFG package |
| dflet | 6:778b081f6a13 | 253 | |
| dflet | 6:778b081f6a13 | 254 | \sa |
| dflet | 6:778b081f6a13 | 255 | |
| dflet | 6:778b081f6a13 | 256 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 257 | |
| dflet | 6:778b081f6a13 | 258 | \warning |
| dflet | 6:778b081f6a13 | 259 | */ |
| dflet | 6:778b081f6a13 | 260 | #define SL_INC_NET_CFG_PKG |
| dflet | 6:778b081f6a13 | 261 | |
| dflet | 6:778b081f6a13 | 262 | /*! |
| dflet | 6:778b081f6a13 | 263 | \brief Defines whether to include NVMEM package in SimpleLink |
| dflet | 6:778b081f6a13 | 264 | driver or not |
| dflet | 6:778b081f6a13 | 265 | |
| dflet | 6:778b081f6a13 | 266 | When defined, the SimpleLink driver will include also the |
| dflet | 6:778b081f6a13 | 267 | NVMEM package |
| dflet | 6:778b081f6a13 | 268 | |
| dflet | 6:778b081f6a13 | 269 | \sa |
| dflet | 6:778b081f6a13 | 270 | |
| dflet | 6:778b081f6a13 | 271 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 272 | |
| dflet | 6:778b081f6a13 | 273 | \warning |
| dflet | 6:778b081f6a13 | 274 | */ |
| dflet | 6:778b081f6a13 | 275 | #define SL_INC_NVMEM_PKG |
| dflet | 6:778b081f6a13 | 276 | |
| dflet | 6:778b081f6a13 | 277 | /*! |
| dflet | 6:778b081f6a13 | 278 | \brief Defines whether to include socket server side APIs |
| dflet | 6:778b081f6a13 | 279 | in SimpleLink driver or not |
| dflet | 6:778b081f6a13 | 280 | |
| dflet | 6:778b081f6a13 | 281 | When defined, the SimpleLink driver will include also socket |
| dflet | 6:778b081f6a13 | 282 | server side APIs |
| dflet | 6:778b081f6a13 | 283 | |
| dflet | 6:778b081f6a13 | 284 | \sa server_side |
| dflet | 6:778b081f6a13 | 285 | |
| dflet | 6:778b081f6a13 | 286 | \note |
| dflet | 6:778b081f6a13 | 287 | |
| dflet | 6:778b081f6a13 | 288 | \warning |
| dflet | 6:778b081f6a13 | 289 | */ |
| dflet | 6:778b081f6a13 | 290 | #define SL_INC_SOCK_SERVER_SIDE_API |
| dflet | 6:778b081f6a13 | 291 | |
| dflet | 6:778b081f6a13 | 292 | /*! |
| dflet | 6:778b081f6a13 | 293 | \brief Defines whether to include socket client side APIs in SimpleLink |
| dflet | 6:778b081f6a13 | 294 | driver or not |
| dflet | 6:778b081f6a13 | 295 | |
| dflet | 6:778b081f6a13 | 296 | When defined, the SimpleLink driver will include also socket |
| dflet | 6:778b081f6a13 | 297 | client side APIs |
| dflet | 6:778b081f6a13 | 298 | |
| dflet | 6:778b081f6a13 | 299 | \sa client_side |
| dflet | 6:778b081f6a13 | 300 | |
| dflet | 6:778b081f6a13 | 301 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 302 | |
| dflet | 6:778b081f6a13 | 303 | \warning |
| dflet | 6:778b081f6a13 | 304 | */ |
| dflet | 6:778b081f6a13 | 305 | #define SL_INC_SOCK_CLIENT_SIDE_API |
| dflet | 6:778b081f6a13 | 306 | |
| dflet | 6:778b081f6a13 | 307 | /*! |
| dflet | 6:778b081f6a13 | 308 | \brief Defines whether to include socket receive APIs in SimpleLink |
| dflet | 6:778b081f6a13 | 309 | driver or not |
| dflet | 6:778b081f6a13 | 310 | |
| dflet | 6:778b081f6a13 | 311 | When defined, the SimpleLink driver will include also socket |
| dflet | 6:778b081f6a13 | 312 | receive side APIs |
| dflet | 6:778b081f6a13 | 313 | |
| dflet | 6:778b081f6a13 | 314 | \sa recv_api |
| dflet | 6:778b081f6a13 | 315 | |
| dflet | 6:778b081f6a13 | 316 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 317 | |
| dflet | 6:778b081f6a13 | 318 | \warning |
| dflet | 6:778b081f6a13 | 319 | */ |
| dflet | 6:778b081f6a13 | 320 | #define SL_INC_SOCK_RECV_API |
| dflet | 6:778b081f6a13 | 321 | |
| dflet | 6:778b081f6a13 | 322 | /*! |
| dflet | 6:778b081f6a13 | 323 | \brief Defines whether to include socket send APIs in SimpleLink |
| dflet | 6:778b081f6a13 | 324 | driver or not |
| dflet | 6:778b081f6a13 | 325 | |
| dflet | 6:778b081f6a13 | 326 | When defined, the SimpleLink driver will include also socket |
| dflet | 6:778b081f6a13 | 327 | send side APIs |
| dflet | 6:778b081f6a13 | 328 | |
| dflet | 6:778b081f6a13 | 329 | \sa send_api |
| dflet | 6:778b081f6a13 | 330 | |
| dflet | 6:778b081f6a13 | 331 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 332 | |
| dflet | 6:778b081f6a13 | 333 | \warning |
| dflet | 6:778b081f6a13 | 334 | */ |
| dflet | 6:778b081f6a13 | 335 | #define SL_INC_SOCK_SEND_API |
| dflet | 6:778b081f6a13 | 336 | |
| dflet | 6:778b081f6a13 | 337 | /*! |
| dflet | 6:778b081f6a13 | 338 | |
| dflet | 6:778b081f6a13 | 339 | Close the Doxygen group. |
| dflet | 6:778b081f6a13 | 340 | @} |
| dflet | 6:778b081f6a13 | 341 | |
| dflet | 6:778b081f6a13 | 342 | */ |
| dflet | 6:778b081f6a13 | 343 | |
| dflet | 6:778b081f6a13 | 344 | |
| dflet | 6:778b081f6a13 | 345 | /*! |
| dflet | 6:778b081f6a13 | 346 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 347 | |
| dflet | 6:778b081f6a13 | 348 | \defgroup porting_enable_device Device Enable/Disable IO |
| dflet | 6:778b081f6a13 | 349 | |
| dflet | 6:778b081f6a13 | 350 | The enable/disable API provide mechanism to enable/disable the network processor |
| dflet | 6:778b081f6a13 | 351 | |
| dflet | 6:778b081f6a13 | 352 | |
| dflet | 6:778b081f6a13 | 353 | PORTING ACTION: |
| dflet | 6:778b081f6a13 | 354 | - None |
| dflet | 6:778b081f6a13 | 355 | @{ |
| dflet | 6:778b081f6a13 | 356 | |
| dflet | 6:778b081f6a13 | 357 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 358 | */ |
| dflet | 6:778b081f6a13 | 359 | /*! |
| dflet | 6:778b081f6a13 | 360 | \brief Preamble to the enabling the Network Processor. |
| dflet | 6:778b081f6a13 | 361 | Placeholder to implement any pre-process operations |
| dflet | 6:778b081f6a13 | 362 | before enabling networking operations. |
| dflet | 6:778b081f6a13 | 363 | |
| dflet | 6:778b081f6a13 | 364 | \sa sl_DeviceEnable |
| dflet | 6:778b081f6a13 | 365 | |
| dflet | 6:778b081f6a13 | 366 | \note belongs to \ref ported_sec |
| dflet | 6:778b081f6a13 | 367 | |
| dflet | 6:778b081f6a13 | 368 | */ |
| dflet | 6:778b081f6a13 | 369 | #define sl_DeviceEnablePreamble() |
| dflet | 6:778b081f6a13 | 370 | |
| dflet | 6:778b081f6a13 | 371 | /*! |
| dflet | 6:778b081f6a13 | 372 | \brief Enable the Network Processor |
| dflet | 6:778b081f6a13 | 373 | |
| dflet | 6:778b081f6a13 | 374 | \sa sl_DeviceDisable |
| dflet | 6:778b081f6a13 | 375 | |
| dflet | 6:778b081f6a13 | 376 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 377 | |
| dflet | 6:778b081f6a13 | 378 | */ |
| dflet | 6:778b081f6a13 | 379 | //#define sl_DeviceEnable _spi->CC3100_enable |
| dflet | 6:778b081f6a13 | 380 | |
| dflet | 6:778b081f6a13 | 381 | /*! |
| dflet | 6:778b081f6a13 | 382 | \brief Disable the Network Processor |
| dflet | 6:778b081f6a13 | 383 | |
| dflet | 6:778b081f6a13 | 384 | \sa sl_DeviceEnable |
| dflet | 6:778b081f6a13 | 385 | |
| dflet | 6:778b081f6a13 | 386 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 387 | */ |
| dflet | 6:778b081f6a13 | 388 | //#define sl_DeviceDisable _spi->CC3100_disable |
| dflet | 6:778b081f6a13 | 389 | |
| dflet | 6:778b081f6a13 | 390 | /*! |
| dflet | 6:778b081f6a13 | 391 | |
| dflet | 6:778b081f6a13 | 392 | Close the Doxygen group. |
| dflet | 6:778b081f6a13 | 393 | @} |
| dflet | 6:778b081f6a13 | 394 | |
| dflet | 6:778b081f6a13 | 395 | */ |
| dflet | 6:778b081f6a13 | 396 | |
| dflet | 6:778b081f6a13 | 397 | /*! |
| dflet | 6:778b081f6a13 | 398 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 399 | |
| dflet | 6:778b081f6a13 | 400 | \defgroup porting_interface Hardware Transport Interface |
| dflet | 6:778b081f6a13 | 401 | |
| dflet | 6:778b081f6a13 | 402 | The simple link device can work with different transport interfaces |
| dflet | 6:778b081f6a13 | 403 | (namely,SPI or UART). Texas Instruments provides single driver |
| dflet | 6:778b081f6a13 | 404 | that can work with all these types. This section binds the |
| dflet | 6:778b081f6a13 | 405 | physical transport interface with the SimpleLink driver |
| dflet | 6:778b081f6a13 | 406 | |
| dflet | 6:778b081f6a13 | 407 | |
| dflet | 6:778b081f6a13 | 408 | \note Correct and efficient implementation of this driver is critical |
| dflet | 6:778b081f6a13 | 409 | for the performances of the SimpleLink device on this platform. |
| dflet | 6:778b081f6a13 | 410 | |
| dflet | 6:778b081f6a13 | 411 | |
| dflet | 6:778b081f6a13 | 412 | PORTING ACTION: |
| dflet | 6:778b081f6a13 | 413 | - None |
| dflet | 6:778b081f6a13 | 414 | |
| dflet | 6:778b081f6a13 | 415 | @{ |
| dflet | 6:778b081f6a13 | 416 | |
| dflet | 6:778b081f6a13 | 417 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 418 | */ |
| dflet | 6:778b081f6a13 | 419 | |
| dflet | 6:778b081f6a13 | 420 | #define _SlFd_t int32_t |
| dflet | 6:778b081f6a13 | 421 | |
| dflet | 6:778b081f6a13 | 422 | /*! |
| dflet | 6:778b081f6a13 | 423 | \brief Opens an interface communication port to be used for communicating |
| dflet | 6:778b081f6a13 | 424 | with a SimpleLink device |
| dflet | 6:778b081f6a13 | 425 | |
| dflet | 6:778b081f6a13 | 426 | Given an interface name and option flags, this function opens |
| dflet | 6:778b081f6a13 | 427 | the communication port and creates a file descriptor. |
| dflet | 6:778b081f6a13 | 428 | This file descriptor is used afterwards to read and write |
| dflet | 6:778b081f6a13 | 429 | data from and to this specific communication channel. |
| dflet | 6:778b081f6a13 | 430 | The speed, clock polarity, clock phase, chip select and all other |
| dflet | 6:778b081f6a13 | 431 | specific attributes of the channel are all should be set to hardcoded |
| dflet | 6:778b081f6a13 | 432 | in this function. |
| dflet | 6:778b081f6a13 | 433 | |
| dflet | 6:778b081f6a13 | 434 | \param ifName - points to the interface name/path. The interface name is an |
| dflet | 6:778b081f6a13 | 435 | optional attributes that the simple link driver receives |
| dflet | 6:778b081f6a13 | 436 | on opening the driver (sl_Start). |
| dflet | 6:778b081f6a13 | 437 | In systems that the spi channel is not implemented as |
| dflet | 6:778b081f6a13 | 438 | part of the OS device drivers, this parameter could be NULL. |
| dflet | 6:778b081f6a13 | 439 | |
| dflet | 6:778b081f6a13 | 440 | \param flags - optional flags parameters for future use |
| dflet | 6:778b081f6a13 | 441 | |
| dflet | 6:778b081f6a13 | 442 | \return upon successful completion, the function shall open the channel |
| dflet | 6:778b081f6a13 | 443 | and return a non-negative integer representing the file descriptor. |
| dflet | 6:778b081f6a13 | 444 | Otherwise, -1 shall be returned |
| dflet | 6:778b081f6a13 | 445 | |
| dflet | 6:778b081f6a13 | 446 | \sa sl_IfClose , sl_IfRead , sl_IfWrite |
| dflet | 6:778b081f6a13 | 447 | |
| dflet | 6:778b081f6a13 | 448 | \note The prototype of the function is as follow: |
| dflet | 6:778b081f6a13 | 449 | Fd_t xxx_IfOpen(char* pIfName , unsigned long flags); |
| dflet | 6:778b081f6a13 | 450 | |
| dflet | 6:778b081f6a13 | 451 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 452 | |
| dflet | 6:778b081f6a13 | 453 | \warning |
| dflet | 6:778b081f6a13 | 454 | */ |
| dflet | 6:778b081f6a13 | 455 | //#define sl_IfOpen _spi->spi_Open |
| dflet | 6:778b081f6a13 | 456 | |
| dflet | 6:778b081f6a13 | 457 | /*! |
| dflet | 6:778b081f6a13 | 458 | \brief Closes an opened interface communication port |
| dflet | 6:778b081f6a13 | 459 | |
| dflet | 6:778b081f6a13 | 460 | \param fd - file descriptor of opened communication channel |
| dflet | 6:778b081f6a13 | 461 | |
| dflet | 6:778b081f6a13 | 462 | \return upon successful completion, the function shall return 0. |
| dflet | 6:778b081f6a13 | 463 | Otherwise, -1 shall be returned |
| dflet | 6:778b081f6a13 | 464 | |
| dflet | 6:778b081f6a13 | 465 | \sa sl_IfOpen , sl_IfRead , sl_IfWrite |
| dflet | 6:778b081f6a13 | 466 | |
| dflet | 6:778b081f6a13 | 467 | \note The prototype of the function is as follow: |
| dflet | 6:778b081f6a13 | 468 | int xxx_IfClose(Fd_t Fd); |
| dflet | 6:778b081f6a13 | 469 | |
| dflet | 6:778b081f6a13 | 470 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 471 | |
| dflet | 6:778b081f6a13 | 472 | \warning |
| dflet | 6:778b081f6a13 | 473 | */ |
| dflet | 6:778b081f6a13 | 474 | //#define sl_IfClose _spi->spi_Close |
| dflet | 6:778b081f6a13 | 475 | |
| dflet | 6:778b081f6a13 | 476 | /*! |
| dflet | 6:778b081f6a13 | 477 | \brief Attempts to read up to len bytes from an opened communication channel |
| dflet | 6:778b081f6a13 | 478 | into a buffer starting at pBuff. |
| dflet | 6:778b081f6a13 | 479 | |
| dflet | 6:778b081f6a13 | 480 | \param fd - file descriptor of an opened communication channel |
| dflet | 6:778b081f6a13 | 481 | |
| dflet | 6:778b081f6a13 | 482 | \param pBuff - pointer to the first location of a buffer that contains enough |
| dflet | 6:778b081f6a13 | 483 | space for all expected data |
| dflet | 6:778b081f6a13 | 484 | |
| dflet | 6:778b081f6a13 | 485 | \param len - number of bytes to read from the communication channel |
| dflet | 6:778b081f6a13 | 486 | |
| dflet | 6:778b081f6a13 | 487 | \return upon successful completion, the function shall return the number of read bytes. |
| dflet | 6:778b081f6a13 | 488 | Otherwise, 0 shall be returned |
| dflet | 6:778b081f6a13 | 489 | |
| dflet | 6:778b081f6a13 | 490 | \sa sl_IfClose , sl_IfOpen , sl_IfWrite |
| dflet | 6:778b081f6a13 | 491 | |
| dflet | 6:778b081f6a13 | 492 | |
| dflet | 6:778b081f6a13 | 493 | \note The prototype of the function is as follow: |
| dflet | 6:778b081f6a13 | 494 | int xxx_IfRead(Fd_t Fd , char* pBuff , int Len); |
| dflet | 6:778b081f6a13 | 495 | |
| dflet | 6:778b081f6a13 | 496 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 497 | |
| dflet | 6:778b081f6a13 | 498 | \warning |
| dflet | 6:778b081f6a13 | 499 | */ |
| dflet | 6:778b081f6a13 | 500 | //#define sl_IfRead _spi->spi_Read |
| dflet | 6:778b081f6a13 | 501 | |
| dflet | 6:778b081f6a13 | 502 | /*! |
| dflet | 6:778b081f6a13 | 503 | \brief attempts to write up to len bytes to the SPI channel |
| dflet | 6:778b081f6a13 | 504 | |
| dflet | 6:778b081f6a13 | 505 | \param fd - file descriptor of an opened communication channel |
| dflet | 6:778b081f6a13 | 506 | |
| dflet | 6:778b081f6a13 | 507 | \param pBuff - pointer to the first location of a buffer that contains |
| dflet | 6:778b081f6a13 | 508 | the data to send over the communication channel |
| dflet | 6:778b081f6a13 | 509 | |
| dflet | 6:778b081f6a13 | 510 | \param len - number of bytes to write to the communication channel |
| dflet | 6:778b081f6a13 | 511 | |
| dflet | 6:778b081f6a13 | 512 | \return upon successful completion, the function shall return the number of sent bytes. |
| dflet | 6:778b081f6a13 | 513 | otherwise, 0 shall be returned |
| dflet | 6:778b081f6a13 | 514 | |
| dflet | 6:778b081f6a13 | 515 | \sa sl_IfClose , sl_IfOpen , sl_IfRead |
| dflet | 6:778b081f6a13 | 516 | |
| dflet | 6:778b081f6a13 | 517 | \note This function could be implemented as zero copy and return only upon successful completion |
| dflet | 6:778b081f6a13 | 518 | of writing the whole buffer, but in cases that memory allocation is not too tight, the |
| dflet | 6:778b081f6a13 | 519 | function could copy the data to internal buffer, return back and complete the write in |
| dflet | 6:778b081f6a13 | 520 | parallel to other activities as long as the other SPI activities would be blocked until |
| dflet | 6:778b081f6a13 | 521 | the entire buffer write would be completed |
| dflet | 6:778b081f6a13 | 522 | |
| dflet | 6:778b081f6a13 | 523 | The prototype of the function is as follow: |
| dflet | 6:778b081f6a13 | 524 | int xxx_IfWrite(Fd_t Fd , char* pBuff , int Len); |
| dflet | 6:778b081f6a13 | 525 | |
| dflet | 6:778b081f6a13 | 526 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 527 | |
| dflet | 6:778b081f6a13 | 528 | \warning |
| dflet | 6:778b081f6a13 | 529 | */ |
| dflet | 6:778b081f6a13 | 530 | //#define sl_IfWrite _spi->spi_Write |
| dflet | 6:778b081f6a13 | 531 | |
| dflet | 6:778b081f6a13 | 532 | /*! |
| dflet | 6:778b081f6a13 | 533 | \brief register an interrupt handler routine for the host IRQ |
| dflet | 6:778b081f6a13 | 534 | |
| dflet | 6:778b081f6a13 | 535 | \param InterruptHdl - pointer to interrupt handler routine |
| dflet | 6:778b081f6a13 | 536 | |
| dflet | 6:778b081f6a13 | 537 | \param pValue - pointer to a memory structure that is passed |
| dflet | 6:778b081f6a13 | 538 | to the interrupt handler. |
| dflet | 6:778b081f6a13 | 539 | |
| dflet | 6:778b081f6a13 | 540 | \return upon successful registration, the function shall return 0. |
| dflet | 6:778b081f6a13 | 541 | Otherwise, -1 shall be returned |
| dflet | 6:778b081f6a13 | 542 | |
| dflet | 6:778b081f6a13 | 543 | \sa |
| dflet | 6:778b081f6a13 | 544 | |
| dflet | 6:778b081f6a13 | 545 | \note If there is already registered interrupt handler, the function |
| dflet | 6:778b081f6a13 | 546 | should overwrite the old handler with the new one |
| dflet | 6:778b081f6a13 | 547 | |
| dflet | 6:778b081f6a13 | 548 | \note If the handler is a null pointer, the function should un-register the |
| dflet | 6:778b081f6a13 | 549 | interrupt handler, and the interrupts can be disabled. |
| dflet | 6:778b081f6a13 | 550 | |
| dflet | 6:778b081f6a13 | 551 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 552 | |
| dflet | 6:778b081f6a13 | 553 | \warning |
| dflet | 6:778b081f6a13 | 554 | */ |
| dflet | 6:778b081f6a13 | 555 | //#define sl_IfRegIntHdlr(InterruptHdl , pValue) \ |
| dflet | 6:778b081f6a13 | 556 | // _spi->registerInterruptHandler(InterruptHdl , pValue) |
| dflet | 6:778b081f6a13 | 557 | /*! |
| dflet | 6:778b081f6a13 | 558 | \brief Masks the Host IRQ |
| dflet | 6:778b081f6a13 | 559 | |
| dflet | 6:778b081f6a13 | 560 | \sa sl_IfUnMaskIntHdlr |
| dflet | 6:778b081f6a13 | 561 | |
| dflet | 6:778b081f6a13 | 562 | |
| dflet | 6:778b081f6a13 | 563 | |
| dflet | 6:778b081f6a13 | 564 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 565 | |
| dflet | 6:778b081f6a13 | 566 | \warning |
| dflet | 6:778b081f6a13 | 567 | */ |
| dflet | 6:778b081f6a13 | 568 | |
| dflet | 6:778b081f6a13 | 569 | //#define sl_IfMaskIntHdlr() |
| dflet | 6:778b081f6a13 | 570 | |
| dflet | 6:778b081f6a13 | 571 | /*! |
| dflet | 6:778b081f6a13 | 572 | \brief Unmasks the Host IRQ |
| dflet | 6:778b081f6a13 | 573 | |
| dflet | 6:778b081f6a13 | 574 | \sa sl_IfMaskIntHdlr |
| dflet | 6:778b081f6a13 | 575 | |
| dflet | 6:778b081f6a13 | 576 | |
| dflet | 6:778b081f6a13 | 577 | |
| dflet | 6:778b081f6a13 | 578 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 579 | |
| dflet | 6:778b081f6a13 | 580 | \warning |
| dflet | 6:778b081f6a13 | 581 | */ |
| dflet | 6:778b081f6a13 | 582 | |
| dflet | 6:778b081f6a13 | 583 | //#define sl_IfUnMaskIntHdlr() |
| dflet | 6:778b081f6a13 | 584 | |
| dflet | 6:778b081f6a13 | 585 | /*! |
| dflet | 6:778b081f6a13 | 586 | \brief Write Handers for statistics debug on write |
| dflet | 6:778b081f6a13 | 587 | |
| dflet | 6:778b081f6a13 | 588 | \param interface handler - pointer to interrupt handler routine |
| dflet | 6:778b081f6a13 | 589 | |
| dflet | 6:778b081f6a13 | 590 | |
| dflet | 6:778b081f6a13 | 591 | \return no return value |
| dflet | 6:778b081f6a13 | 592 | |
| dflet | 6:778b081f6a13 | 593 | \sa |
| dflet | 6:778b081f6a13 | 594 | |
| dflet | 6:778b081f6a13 | 595 | \note An optional hooks for monitoring before and after write info |
| dflet | 6:778b081f6a13 | 596 | |
| dflet | 6:778b081f6a13 | 597 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 598 | |
| dflet | 6:778b081f6a13 | 599 | \warning |
| dflet | 6:778b081f6a13 | 600 | */ |
| dflet | 6:778b081f6a13 | 601 | /* |
| dflet | 6:778b081f6a13 | 602 | #define SL_START_WRITE_STAT |
| dflet | 6:778b081f6a13 | 603 | */ |
| dflet | 6:778b081f6a13 | 604 | |
| dflet | 6:778b081f6a13 | 605 | #ifdef SL_START_WRITE_STAT |
| dflet | 6:778b081f6a13 | 606 | #define sl_IfStartWriteSequence |
| dflet | 6:778b081f6a13 | 607 | #define sl_IfEndWriteSequence |
| dflet | 6:778b081f6a13 | 608 | #endif |
| dflet | 6:778b081f6a13 | 609 | /*! |
| dflet | 6:778b081f6a13 | 610 | |
| dflet | 6:778b081f6a13 | 611 | Close the Doxygen group. |
| dflet | 6:778b081f6a13 | 612 | @} |
| dflet | 6:778b081f6a13 | 613 | |
| dflet | 6:778b081f6a13 | 614 | */ |
| dflet | 6:778b081f6a13 | 615 | |
| dflet | 6:778b081f6a13 | 616 | /*! |
| dflet | 6:778b081f6a13 | 617 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 618 | |
| dflet | 6:778b081f6a13 | 619 | \defgroup porting_mem_mgm Memory Management |
| dflet | 6:778b081f6a13 | 620 | |
| dflet | 6:778b081f6a13 | 621 | This section declare in which memory management model the SimpleLink driver |
| dflet | 6:778b081f6a13 | 622 | will run: |
| dflet | 6:778b081f6a13 | 623 | -# Static |
| dflet | 6:778b081f6a13 | 624 | -# Dynamic |
| dflet | 6:778b081f6a13 | 625 | |
| dflet | 6:778b081f6a13 | 626 | This section IS NOT REQUIRED in case Static model is selected. |
| dflet | 6:778b081f6a13 | 627 | |
| dflet | 6:778b081f6a13 | 628 | The default memory model is Static |
| dflet | 6:778b081f6a13 | 629 | |
| dflet | 6:778b081f6a13 | 630 | PORTING ACTION: |
| dflet | 6:778b081f6a13 | 631 | - If dynamic model is selected, define the alloc and free functions. |
| dflet | 6:778b081f6a13 | 632 | |
| dflet | 6:778b081f6a13 | 633 | @{ |
| dflet | 6:778b081f6a13 | 634 | |
| dflet | 6:778b081f6a13 | 635 | ***************************************************************************** |
| dflet | 6:778b081f6a13 | 636 | */ |
| dflet | 6:778b081f6a13 | 637 | |
| dflet | 6:778b081f6a13 | 638 | /*! |
| dflet | 6:778b081f6a13 | 639 | \brief Defines whether the SimpleLink driver is working in dynamic |
| dflet | 6:778b081f6a13 | 640 | memory model or not |
| dflet | 6:778b081f6a13 | 641 | |
| dflet | 6:778b081f6a13 | 642 | When defined, the SimpleLink driver use dynamic allocations |
| dflet | 6:778b081f6a13 | 643 | if dynamic allocation is selected malloc and free functions |
| dflet | 6:778b081f6a13 | 644 | must be retrieved |
| dflet | 6:778b081f6a13 | 645 | |
| dflet | 6:778b081f6a13 | 646 | \sa |
| dflet | 6:778b081f6a13 | 647 | |
| dflet | 6:778b081f6a13 | 648 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 649 | |
| dflet | 6:778b081f6a13 | 650 | \warning |
| dflet | 6:778b081f6a13 | 651 | */ |
| dflet | 6:778b081f6a13 | 652 | /* |
| dflet | 6:778b081f6a13 | 653 | #define SL_MEMORY_MGMT_DYNAMIC |
| dflet | 6:778b081f6a13 | 654 | */ |
| dflet | 6:778b081f6a13 | 655 | |
| dflet | 6:778b081f6a13 | 656 | #ifdef SL_MEMORY_MGMT_DYNAMIC |
| dflet | 6:778b081f6a13 | 657 | |
| dflet | 6:778b081f6a13 | 658 | /*! |
| dflet | 6:778b081f6a13 | 659 | \brief |
| dflet | 6:778b081f6a13 | 660 | |
| dflet | 6:778b081f6a13 | 661 | \sa |
| dflet | 6:778b081f6a13 | 662 | |
| dflet | 6:778b081f6a13 | 663 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 664 | |
| dflet | 6:778b081f6a13 | 665 | \warning |
| dflet | 6:778b081f6a13 | 666 | */ |
| dflet | 6:778b081f6a13 | 667 | #define sl_Malloc(Size) malloc(Size) |
| dflet | 6:778b081f6a13 | 668 | |
| dflet | 6:778b081f6a13 | 669 | /*! |
| dflet | 6:778b081f6a13 | 670 | \brief |
| dflet | 6:778b081f6a13 | 671 | |
| dflet | 6:778b081f6a13 | 672 | \sa |
| dflet | 6:778b081f6a13 | 673 | |
| dflet | 6:778b081f6a13 | 674 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 675 | |
| dflet | 6:778b081f6a13 | 676 | \warning |
| dflet | 6:778b081f6a13 | 677 | */ |
| dflet | 6:778b081f6a13 | 678 | #define sl_Free(pMem) free(pMem) |
| dflet | 6:778b081f6a13 | 679 | |
| dflet | 6:778b081f6a13 | 680 | #endif |
| dflet | 6:778b081f6a13 | 681 | |
| dflet | 6:778b081f6a13 | 682 | /*! |
| dflet | 6:778b081f6a13 | 683 | |
| dflet | 6:778b081f6a13 | 684 | Close the Doxygen group. |
| dflet | 6:778b081f6a13 | 685 | @} |
| dflet | 6:778b081f6a13 | 686 | |
| dflet | 6:778b081f6a13 | 687 | */ |
| dflet | 6:778b081f6a13 | 688 | |
| dflet | 6:778b081f6a13 | 689 | /*! |
| dflet | 6:778b081f6a13 | 690 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 691 | |
| dflet | 6:778b081f6a13 | 692 | \defgroup porting_os Operating System (OS) |
| dflet | 6:778b081f6a13 | 693 | |
| dflet | 6:778b081f6a13 | 694 | The simple link driver can run on multi-threaded environment as well |
| dflet | 6:778b081f6a13 | 695 | as non-os environment (main loop) |
| dflet | 6:778b081f6a13 | 696 | |
| dflet | 6:778b081f6a13 | 697 | This section IS NOT REQUIRED in case you are working on non-os environment. |
| dflet | 6:778b081f6a13 | 698 | |
| dflet | 6:778b081f6a13 | 699 | If you choose to work in multi-threaded environment under any operating system |
| dflet | 6:778b081f6a13 | 700 | you will have to provide some basic adaptation routines to allow the driver |
| dflet | 6:778b081f6a13 | 701 | to protect access to resources from different threads (locking object) and |
| dflet | 6:778b081f6a13 | 702 | to allow synchronization between threads (sync objects). |
| dflet | 6:778b081f6a13 | 703 | |
| dflet | 6:778b081f6a13 | 704 | PORTING ACTION: |
| dflet | 6:778b081f6a13 | 705 | -# Uncomment SL_PLATFORM_MULTI_THREADED define |
| dflet | 6:778b081f6a13 | 706 | -# Bind locking object routines |
| dflet | 6:778b081f6a13 | 707 | -# Bind synchronization object routines |
| dflet | 6:778b081f6a13 | 708 | -# Optional - Bind spawn thread routine |
| dflet | 6:778b081f6a13 | 709 | |
| dflet | 6:778b081f6a13 | 710 | @{ |
| dflet | 6:778b081f6a13 | 711 | |
| dflet | 6:778b081f6a13 | 712 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 713 | */ |
| dflet | 6:778b081f6a13 | 714 | |
| dflet | 6:778b081f6a13 | 715 | /* |
| dflet | 6:778b081f6a13 | 716 | #define SL_PLATFORM_MULTI_THREADED |
| dflet | 6:778b081f6a13 | 717 | */ |
| dflet | 6:778b081f6a13 | 718 | |
| dflet | 6:778b081f6a13 | 719 | #ifdef SL_PLATFORM_MULTI_THREADED |
| dflet | 6:778b081f6a13 | 720 | |
| dflet | 6:778b081f6a13 | 721 | /*! |
| dflet | 6:778b081f6a13 | 722 | \brief |
| dflet | 6:778b081f6a13 | 723 | \sa |
| dflet | 6:778b081f6a13 | 724 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 725 | \warning |
| dflet | 6:778b081f6a13 | 726 | */ |
| dflet | 6:778b081f6a13 | 727 | //#define SL_OS_RET_CODE_OK |
| dflet | 6:778b081f6a13 | 728 | |
| dflet | 6:778b081f6a13 | 729 | /*! |
| dflet | 6:778b081f6a13 | 730 | \brief |
| dflet | 6:778b081f6a13 | 731 | \sa |
| dflet | 6:778b081f6a13 | 732 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 733 | \warning |
| dflet | 6:778b081f6a13 | 734 | */ |
| dflet | 6:778b081f6a13 | 735 | //#define SL_OS_WAIT_FOREVER |
| dflet | 6:778b081f6a13 | 736 | |
| dflet | 6:778b081f6a13 | 737 | /*! |
| dflet | 6:778b081f6a13 | 738 | \brief |
| dflet | 6:778b081f6a13 | 739 | \sa |
| dflet | 6:778b081f6a13 | 740 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 741 | \warning |
| dflet | 6:778b081f6a13 | 742 | */ |
| dflet | 6:778b081f6a13 | 743 | //#define SL_OS_NO_WAIT |
| dflet | 6:778b081f6a13 | 744 | |
| dflet | 6:778b081f6a13 | 745 | /*! |
| dflet | 6:778b081f6a13 | 746 | \brief type definition for a time value |
| dflet | 6:778b081f6a13 | 747 | |
| dflet | 6:778b081f6a13 | 748 | \note On each porting or platform the type could be whatever is needed - integer, pointer to structure etc. |
| dflet | 6:778b081f6a13 | 749 | |
| dflet | 6:778b081f6a13 | 750 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 751 | */ |
| dflet | 6:778b081f6a13 | 752 | //#define _SlTime_t |
| dflet | 6:778b081f6a13 | 753 | |
| dflet | 6:778b081f6a13 | 754 | /*! |
| dflet | 6:778b081f6a13 | 755 | \brief type definition for a sync object container |
| dflet | 6:778b081f6a13 | 756 | |
| dflet | 6:778b081f6a13 | 757 | Sync object is object used to synchronize between two threads or thread and interrupt handler. |
| dflet | 6:778b081f6a13 | 758 | One thread is waiting on the object and the other thread send a signal, which then |
| dflet | 6:778b081f6a13 | 759 | release the waiting thread. |
| dflet | 6:778b081f6a13 | 760 | The signal must be able to be sent from interrupt context. |
| dflet | 6:778b081f6a13 | 761 | This object is generally implemented by binary semaphore or events. |
| dflet | 6:778b081f6a13 | 762 | |
| dflet | 6:778b081f6a13 | 763 | \note On each porting or platform the type could be whatever is needed - integer, structure etc. |
| dflet | 6:778b081f6a13 | 764 | |
| dflet | 6:778b081f6a13 | 765 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 766 | */ |
| dflet | 6:778b081f6a13 | 767 | //#define _SlSyncObj_t |
| dflet | 6:778b081f6a13 | 768 | |
| dflet | 6:778b081f6a13 | 769 | |
| dflet | 6:778b081f6a13 | 770 | /*! |
| dflet | 6:778b081f6a13 | 771 | \brief This function creates a sync object |
| dflet | 6:778b081f6a13 | 772 | |
| dflet | 6:778b081f6a13 | 773 | The sync object is used for synchronization between different thread or ISR and |
| dflet | 6:778b081f6a13 | 774 | a thread. |
| dflet | 6:778b081f6a13 | 775 | |
| dflet | 6:778b081f6a13 | 776 | \param pSyncObj - pointer to the sync object control block |
| dflet | 6:778b081f6a13 | 777 | |
| dflet | 6:778b081f6a13 | 778 | \return upon successful creation the function should return 0 |
| dflet | 6:778b081f6a13 | 779 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 780 | |
| dflet | 6:778b081f6a13 | 781 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 782 | \warning |
| dflet | 6:778b081f6a13 | 783 | */ |
| dflet | 6:778b081f6a13 | 784 | //#define sl_SyncObjCreate(pSyncObj,pName) |
| dflet | 6:778b081f6a13 | 785 | |
| dflet | 6:778b081f6a13 | 786 | |
| dflet | 6:778b081f6a13 | 787 | /*! |
| dflet | 6:778b081f6a13 | 788 | \brief This function deletes a sync object |
| dflet | 6:778b081f6a13 | 789 | |
| dflet | 6:778b081f6a13 | 790 | \param pSyncObj - pointer to the sync object control block |
| dflet | 6:778b081f6a13 | 791 | |
| dflet | 6:778b081f6a13 | 792 | \return upon successful deletion the function should return 0 |
| dflet | 6:778b081f6a13 | 793 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 794 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 795 | \warning |
| dflet | 6:778b081f6a13 | 796 | */ |
| dflet | 6:778b081f6a13 | 797 | //#define sl_SyncObjDelete(pSyncObj) |
| dflet | 6:778b081f6a13 | 798 | |
| dflet | 6:778b081f6a13 | 799 | |
| dflet | 6:778b081f6a13 | 800 | /*! |
| dflet | 6:778b081f6a13 | 801 | \brief This function generates a sync signal for the object. |
| dflet | 6:778b081f6a13 | 802 | |
| dflet | 6:778b081f6a13 | 803 | All suspended threads waiting on this sync object are resumed |
| dflet | 6:778b081f6a13 | 804 | |
| dflet | 6:778b081f6a13 | 805 | \param pSyncObj - pointer to the sync object control block |
| dflet | 6:778b081f6a13 | 806 | |
| dflet | 6:778b081f6a13 | 807 | \return upon successful signalling the function should return 0 |
| dflet | 6:778b081f6a13 | 808 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 809 | \note the function could be called from ISR context |
| dflet | 6:778b081f6a13 | 810 | \warning |
| dflet | 6:778b081f6a13 | 811 | */ |
| dflet | 6:778b081f6a13 | 812 | //#define sl_SyncObjSignal(pSyncObj) |
| dflet | 6:778b081f6a13 | 813 | |
| dflet | 6:778b081f6a13 | 814 | /*! |
| dflet | 6:778b081f6a13 | 815 | \brief This function generates a sync signal for the object from Interrupt |
| dflet | 6:778b081f6a13 | 816 | |
| dflet | 6:778b081f6a13 | 817 | This is for RTOS that should signal from IRQ using a dedicated API |
| dflet | 6:778b081f6a13 | 818 | |
| dflet | 6:778b081f6a13 | 819 | \param pSyncObj - pointer to the sync object control block |
| dflet | 6:778b081f6a13 | 820 | |
| dflet | 6:778b081f6a13 | 821 | \return upon successful signalling the function should return 0 |
| dflet | 6:778b081f6a13 | 822 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 823 | \note the function could be called from ISR context |
| dflet | 6:778b081f6a13 | 824 | \warning |
| dflet | 6:778b081f6a13 | 825 | */ |
| dflet | 6:778b081f6a13 | 826 | //#define sl_SyncObjSignalFromIRQ(pSyncObj) |
| dflet | 6:778b081f6a13 | 827 | /*! |
| dflet | 6:778b081f6a13 | 828 | \brief This function waits for a sync signal of the specific sync object |
| dflet | 6:778b081f6a13 | 829 | |
| dflet | 6:778b081f6a13 | 830 | \param pSyncObj - pointer to the sync object control block |
| dflet | 6:778b081f6a13 | 831 | \param Timeout - numeric value specifies the maximum number of mSec to |
| dflet | 6:778b081f6a13 | 832 | stay suspended while waiting for the sync signal |
| dflet | 6:778b081f6a13 | 833 | Currently, the simple link driver uses only two values: |
| dflet | 6:778b081f6a13 | 834 | - OSI_WAIT_FOREVER |
| dflet | 6:778b081f6a13 | 835 | - OSI_NO_WAIT |
| dflet | 6:778b081f6a13 | 836 | |
| dflet | 6:778b081f6a13 | 837 | \return upon successful reception of the signal within the timeout window return 0 |
| dflet | 6:778b081f6a13 | 838 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 839 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 840 | \warning |
| dflet | 6:778b081f6a13 | 841 | */ |
| dflet | 6:778b081f6a13 | 842 | //#define sl_SyncObjWait(pSyncObj,Timeout) |
| dflet | 6:778b081f6a13 | 843 | |
| dflet | 6:778b081f6a13 | 844 | /*! |
| dflet | 6:778b081f6a13 | 845 | \brief type definition for a locking object container |
| dflet | 6:778b081f6a13 | 846 | |
| dflet | 6:778b081f6a13 | 847 | Locking object are used to protect a resource from mutual accesses of two or more threads. |
| dflet | 6:778b081f6a13 | 848 | The locking object should support reentrant locks by a signal thread. |
| dflet | 6:778b081f6a13 | 849 | This object is generally implemented by mutex semaphore |
| dflet | 6:778b081f6a13 | 850 | |
| dflet | 6:778b081f6a13 | 851 | \note On each porting or platform the type could be whatever is needed - integer, structure etc. |
| dflet | 6:778b081f6a13 | 852 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 853 | */ |
| dflet | 6:778b081f6a13 | 854 | //#define _SlLockObj_t |
| dflet | 6:778b081f6a13 | 855 | |
| dflet | 6:778b081f6a13 | 856 | /*! |
| dflet | 6:778b081f6a13 | 857 | \brief This function creates a locking object. |
| dflet | 6:778b081f6a13 | 858 | |
| dflet | 6:778b081f6a13 | 859 | The locking object is used for protecting a shared resources between different |
| dflet | 6:778b081f6a13 | 860 | threads. |
| dflet | 6:778b081f6a13 | 861 | |
| dflet | 6:778b081f6a13 | 862 | \param pLockObj - pointer to the locking object control block |
| dflet | 6:778b081f6a13 | 863 | |
| dflet | 6:778b081f6a13 | 864 | \return upon successful creation the function should return 0 |
| dflet | 6:778b081f6a13 | 865 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 866 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 867 | \warning |
| dflet | 6:778b081f6a13 | 868 | */ |
| dflet | 6:778b081f6a13 | 869 | #define sl_LockObjCreate(pLockObj,pName) |
| dflet | 6:778b081f6a13 | 870 | |
| dflet | 6:778b081f6a13 | 871 | /*! |
| dflet | 6:778b081f6a13 | 872 | \brief This function deletes a locking object. |
| dflet | 6:778b081f6a13 | 873 | |
| dflet | 6:778b081f6a13 | 874 | \param pLockObj - pointer to the locking object control block |
| dflet | 6:778b081f6a13 | 875 | |
| dflet | 6:778b081f6a13 | 876 | \return upon successful deletion the function should return 0 |
| dflet | 6:778b081f6a13 | 877 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 878 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 879 | \warning |
| dflet | 6:778b081f6a13 | 880 | */ |
| dflet | 6:778b081f6a13 | 881 | #define sl_LockObjDelete(pLockObj) |
| dflet | 6:778b081f6a13 | 882 | |
| dflet | 6:778b081f6a13 | 883 | /*! |
| dflet | 6:778b081f6a13 | 884 | \brief This function locks a locking object. |
| dflet | 6:778b081f6a13 | 885 | |
| dflet | 6:778b081f6a13 | 886 | All other threads that call this function before this thread calls |
| dflet | 6:778b081f6a13 | 887 | the osi_LockObjUnlock would be suspended |
| dflet | 6:778b081f6a13 | 888 | |
| dflet | 6:778b081f6a13 | 889 | \param pLockObj - pointer to the locking object control block |
| dflet | 6:778b081f6a13 | 890 | \param Timeout - numeric value specifies the maximum number of mSec to |
| dflet | 6:778b081f6a13 | 891 | stay suspended while waiting for the locking object |
| dflet | 6:778b081f6a13 | 892 | Currently, the simple link driver uses only two values: |
| dflet | 6:778b081f6a13 | 893 | - OSI_WAIT_FOREVER |
| dflet | 6:778b081f6a13 | 894 | - OSI_NO_WAIT |
| dflet | 6:778b081f6a13 | 895 | |
| dflet | 6:778b081f6a13 | 896 | |
| dflet | 6:778b081f6a13 | 897 | \return upon successful reception of the locking object the function should return 0 |
| dflet | 6:778b081f6a13 | 898 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 899 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 900 | \warning |
| dflet | 6:778b081f6a13 | 901 | */ |
| dflet | 6:778b081f6a13 | 902 | #define sl_LockObjLock(pLockObj,Timeout) |
| dflet | 6:778b081f6a13 | 903 | |
| dflet | 6:778b081f6a13 | 904 | /*! |
| dflet | 6:778b081f6a13 | 905 | \brief This function unlock a locking object. |
| dflet | 6:778b081f6a13 | 906 | |
| dflet | 6:778b081f6a13 | 907 | \param pLockObj - pointer to the locking object control block |
| dflet | 6:778b081f6a13 | 908 | |
| dflet | 6:778b081f6a13 | 909 | \return upon successful unlocking the function should return 0 |
| dflet | 6:778b081f6a13 | 910 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 911 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 912 | \warning |
| dflet | 6:778b081f6a13 | 913 | */ |
| dflet | 6:778b081f6a13 | 914 | #define sl_LockObjUnlock(pLockObj) |
| dflet | 6:778b081f6a13 | 915 | |
| dflet | 6:778b081f6a13 | 916 | #endif |
| dflet | 6:778b081f6a13 | 917 | /*! |
| dflet | 6:778b081f6a13 | 918 | \brief This function call the pEntry callback from a different context |
| dflet | 6:778b081f6a13 | 919 | |
| dflet | 6:778b081f6a13 | 920 | \param pEntry - pointer to the entry callback function |
| dflet | 6:778b081f6a13 | 921 | |
| dflet | 6:778b081f6a13 | 922 | \param pValue - pointer to any type of memory structure that would be |
| dflet | 6:778b081f6a13 | 923 | passed to pEntry callback from the execution thread. |
| dflet | 6:778b081f6a13 | 924 | |
| dflet | 6:778b081f6a13 | 925 | \param flags - execution flags - reserved for future usage |
| dflet | 6:778b081f6a13 | 926 | |
| dflet | 6:778b081f6a13 | 927 | \return upon successful registration of the spawn the function should return 0 |
| dflet | 6:778b081f6a13 | 928 | (the function is not blocked till the end of the execution of the function |
| dflet | 6:778b081f6a13 | 929 | and could be returned before the execution is actually completed) |
| dflet | 6:778b081f6a13 | 930 | Otherwise, a negative value indicating the error code shall be returned |
| dflet | 6:778b081f6a13 | 931 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 932 | \warning |
| dflet | 6:778b081f6a13 | 933 | */ |
| dflet | 6:778b081f6a13 | 934 | /* |
| dflet | 6:778b081f6a13 | 935 | #define SL_PLATFORM_EXTERNAL_SPAWN |
| dflet | 6:778b081f6a13 | 936 | */ |
| dflet | 6:778b081f6a13 | 937 | |
| dflet | 6:778b081f6a13 | 938 | #ifdef SL_PLATFORM_EXTERNAL_SPAWN |
| dflet | 6:778b081f6a13 | 939 | #define sl_Spawn(pEntry,pValue,flags) |
| dflet | 6:778b081f6a13 | 940 | #endif |
| dflet | 6:778b081f6a13 | 941 | |
| dflet | 6:778b081f6a13 | 942 | /*! |
| dflet | 6:778b081f6a13 | 943 | |
| dflet | 6:778b081f6a13 | 944 | Close the Doxygen group. |
| dflet | 6:778b081f6a13 | 945 | @} |
| dflet | 6:778b081f6a13 | 946 | |
| dflet | 6:778b081f6a13 | 947 | */ |
| dflet | 6:778b081f6a13 | 948 | |
| dflet | 6:778b081f6a13 | 949 | |
| dflet | 6:778b081f6a13 | 950 | /*! |
| dflet | 6:778b081f6a13 | 951 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 952 | |
| dflet | 6:778b081f6a13 | 953 | \defgroup porting_events Event Handlers |
| dflet | 6:778b081f6a13 | 954 | |
| dflet | 6:778b081f6a13 | 955 | This section includes the asynchronous event handlers routines |
| dflet | 6:778b081f6a13 | 956 | |
| dflet | 6:778b081f6a13 | 957 | PORTING ACTION: |
| dflet | 6:778b081f6a13 | 958 | -Uncomment the required handler and define your routine as the value |
| dflet | 6:778b081f6a13 | 959 | of this handler |
| dflet | 6:778b081f6a13 | 960 | |
| dflet | 6:778b081f6a13 | 961 | @{ |
| dflet | 6:778b081f6a13 | 962 | |
| dflet | 6:778b081f6a13 | 963 | ****************************************************************************** |
| dflet | 6:778b081f6a13 | 964 | */ |
| dflet | 6:778b081f6a13 | 965 | |
| dflet | 6:778b081f6a13 | 966 | /*! |
| dflet | 6:778b081f6a13 | 967 | \brief |
| dflet | 6:778b081f6a13 | 968 | |
| dflet | 6:778b081f6a13 | 969 | \sa |
| dflet | 6:778b081f6a13 | 970 | |
| dflet | 6:778b081f6a13 | 971 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 972 | |
| dflet | 6:778b081f6a13 | 973 | \warning |
| dflet | 6:778b081f6a13 | 974 | */ |
| dflet | 6:778b081f6a13 | 975 | #define sl_GeneralEvtHdlr SimpleLinkGeneralEventHandler |
| dflet | 6:778b081f6a13 | 976 | |
| dflet | 6:778b081f6a13 | 977 | |
| dflet | 6:778b081f6a13 | 978 | /*! |
| dflet | 6:778b081f6a13 | 979 | \brief An event handler for WLAN connection or disconnection indication |
| dflet | 6:778b081f6a13 | 980 | This event handles async WLAN events. |
| dflet | 6:778b081f6a13 | 981 | Possible events are: |
| dflet | 6:778b081f6a13 | 982 | SL_WLAN_CONNECT_EVENT - indicates WLAN is connected |
| dflet | 6:778b081f6a13 | 983 | SL_WLAN_DISCONNECT_EVENT - indicates WLAN is disconnected |
| dflet | 6:778b081f6a13 | 984 | \sa |
| dflet | 6:778b081f6a13 | 985 | |
| dflet | 6:778b081f6a13 | 986 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 987 | |
| dflet | 6:778b081f6a13 | 988 | \warning |
| dflet | 6:778b081f6a13 | 989 | */ |
| dflet | 6:778b081f6a13 | 990 | #define sl_WlanEvtHdlr SimpleLinkWlanEventHandler |
| dflet | 6:778b081f6a13 | 991 | |
| dflet | 6:778b081f6a13 | 992 | /*! |
| dflet | 6:778b081f6a13 | 993 | \brief An event handler for IP address asynchronous event. Usually accepted after new WLAN connection. |
| dflet | 6:778b081f6a13 | 994 | This event handles networking events. |
| dflet | 6:778b081f6a13 | 995 | Possible events are: |
| dflet | 6:778b081f6a13 | 996 | SL_NETAPP_IPV4_ACQUIRED - IP address was acquired (DHCP or Static) |
| dflet | 6:778b081f6a13 | 997 | |
| dflet | 6:778b081f6a13 | 998 | \sa |
| dflet | 6:778b081f6a13 | 999 | |
| dflet | 6:778b081f6a13 | 1000 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 1001 | |
| dflet | 6:778b081f6a13 | 1002 | \warning |
| dflet | 6:778b081f6a13 | 1003 | */ |
| dflet | 6:778b081f6a13 | 1004 | |
| dflet | 6:778b081f6a13 | 1005 | #define sl_NetAppEvtHdlr SimpleLinkNetAppEventHandler |
| dflet | 6:778b081f6a13 | 1006 | |
| dflet | 6:778b081f6a13 | 1007 | /*! |
| dflet | 6:778b081f6a13 | 1008 | \brief A callback for HTTP server events. |
| dflet | 6:778b081f6a13 | 1009 | Possible events are: |
| dflet | 6:778b081f6a13 | 1010 | SL_NETAPP_HTTPGETTOKENVALUE - NWP requests to get the value of a specific token |
| dflet | 6:778b081f6a13 | 1011 | SL_NETAPP_HTTPPOSTTOKENVALUE - NWP post to the host a new value for a specific token |
| dflet | 6:778b081f6a13 | 1012 | |
| dflet | 6:778b081f6a13 | 1013 | \param pServerEvent - Contains the relevant event information (SL_NETAPP_HTTPGETTOKENVALUE or SL_NETAPP_HTTPPOSTTOKENVALUE) |
| dflet | 6:778b081f6a13 | 1014 | |
| dflet | 6:778b081f6a13 | 1015 | \param pServerResponse - Should be filled by the user with the relevant response information (i.e SL_NETAPP_HTTPSETTOKENVALUE as a response to SL_NETAPP_HTTPGETTOKENVALUE event) |
| dflet | 6:778b081f6a13 | 1016 | |
| dflet | 6:778b081f6a13 | 1017 | \sa |
| dflet | 6:778b081f6a13 | 1018 | |
| dflet | 6:778b081f6a13 | 1019 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 1020 | |
| dflet | 6:778b081f6a13 | 1021 | \warning |
| dflet | 6:778b081f6a13 | 1022 | */ |
| dflet | 6:778b081f6a13 | 1023 | |
| dflet | 6:778b081f6a13 | 1024 | #define sl_HttpServerCallback SimpleLinkHttpServerCallback |
| dflet | 6:778b081f6a13 | 1025 | |
| dflet | 6:778b081f6a13 | 1026 | /*! |
| dflet | 6:778b081f6a13 | 1027 | \brief |
| dflet | 6:778b081f6a13 | 1028 | |
| dflet | 6:778b081f6a13 | 1029 | \sa |
| dflet | 6:778b081f6a13 | 1030 | |
| dflet | 6:778b081f6a13 | 1031 | \note belongs to \ref porting_sec |
| dflet | 6:778b081f6a13 | 1032 | |
| dflet | 6:778b081f6a13 | 1033 | \warning |
| dflet | 6:778b081f6a13 | 1034 | */ |
| dflet | 6:778b081f6a13 | 1035 | #define sl_SockEvtHdlr SimpleLinkSockEventHandler |
| dflet | 6:778b081f6a13 | 1036 | |
| dflet | 6:778b081f6a13 | 1037 | |
| dflet | 6:778b081f6a13 | 1038 | |
| dflet | 6:778b081f6a13 | 1039 | /*! |
| dflet | 6:778b081f6a13 | 1040 | |
| dflet | 6:778b081f6a13 | 1041 | Close the Doxygen group. |
| dflet | 6:778b081f6a13 | 1042 | @} |
| dflet | 6:778b081f6a13 | 1043 | |
| dflet | 6:778b081f6a13 | 1044 | */ |
| dflet | 6:778b081f6a13 | 1045 | |
| dflet | 6:778b081f6a13 | 1046 | #endif /* __USER_H__ */ |
| dflet | 6:778b081f6a13 | 1047 |