Diff: init.cpp

Revision:

8:6870e6801838

Parent:

3:4a2dfa38a61e

--- a/init.cpp	Tue Jun 03 08:41:53 2014 +0000
+++ b/init.cpp	Sat Oct 17 23:12:10 2015 +0000
@@ -16,55 +16,12 @@
 #include "main.h"
 #include "mbed.h"
 
-#if (MY_BOARD == WIGO)
-
-#include "NVIC_set_all_priorities.h"
-
-/**
- *  \brief Wi-Go initialization
- *  \param none
- *  \return none
- */
-void init() {
-    DigitalOut PWR_EN1(PTB2);
-    DigitalOut PWR_EN2(PTB3);
-
-    // Wi-Go set current to 500mA since we're turning on the Wi-Fi
-    PWR_EN1 = 0;
-    PWR_EN2 = 1;
-
-    NVIC_set_all_irq_priorities(3);
-    NVIC_SetPriority(SPI0_IRQn, 0x0);     // Wi-Fi SPI interrupt must be higher priority than SysTick
-    NVIC_SetPriority(PORTA_IRQn, 0x1);
-    NVIC_SetPriority(SysTick_IRQn, 0x2);  // SysTick set to lower priority than Wi-Fi SPI bus interrupt
-    PORTA->PCR[16] |=PORT_PCR_ISF_MASK;
-    PORTA->ISFR |= (1 << 16);
-}
-
-#elif (MY_BOARD == WIFI_DIPCORTEX)
-
-/**
- *  \brief Wifi DipCortex initialization
- *  \param none
- *  \return none
- */
-void init() {
-    NVIC_SetPriority(SSP1_IRQn, 0x0);
-    NVIC_SetPriority(PIN_INT0_IRQn, 0x1);
-
-    // SysTick set to lower priority than Wi-Fi SPI bus interrupt
-    NVIC_SetPriority(SysTick_IRQn, 0x2);
-}
-
-#else
-
-/**
- *  \brief Place here init routine for your board
- *  \param none
- *  \return none
- */
-void init() {
-
-}
-
+#if defined (TARGET_NUCLEO_F446RE)
+    #include "NVIC_set_all_priorities.h"
+    void init() {
+        NVIC_set_all_irq_priorities(3);
+        NVIC_SetPriority(SPI1_IRQn, 0x0);     // Wi-Fi SPI interrupt must be higher priority than SysTick
+        NVIC_SetPriority(EXTI3_IRQn, 0x1);    // PB3 interrupt
+        NVIC_SetPriority(SysTick_IRQn, 0x2);  // SysTick set to lower priority than Wi-Fi SPI bus interrupt
+    }
 #endif