File content as of revision 82:0b31dbcd4769:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H

#include "cmsis.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    OSC32KCLK = 0,
    RTC_CLKIN = 2
} RTCName;

typedef enum {
    UART_0 = (int)UART0_BASE,
    UART_1 = (int)UART1_BASE,
    UART_2 = (int)UART2_BASE
} UARTName;
#define STDIO_UART_TX     USBTX
#define STDIO_UART_RX     USBRX
#define STDIO_UART        UART_0

typedef enum {
    I2C_0 = (int)I2C0_BASE,
    I2C_1 = (int)I2C1_BASE,
} I2CName;

#define TPM_SHIFT   8
typedef enum {
    PWM_1  = (0 << TPM_SHIFT) | (0),  // TPM0 CH0
    PWM_2  = (0 << TPM_SHIFT) | (1),  // TPM0 CH1
    PWM_3  = (0 << TPM_SHIFT) | (2),  // TPM0 CH2
    PWM_4  = (0 << TPM_SHIFT) | (3),  // TPM0 CH3
    PWM_5  = (0 << TPM_SHIFT) | (4),  // TPM0 CH4
    PWM_6  = (0 << TPM_SHIFT) | (5),  // TPM0 CH5

    PWM_7  = (1 << TPM_SHIFT) | (0),  // TPM1 CH0
    PWM_8  = (1 << TPM_SHIFT) | (1),  // TPM1 CH1

    PWM_9  = (2 << TPM_SHIFT) | (0),  // TPM2 CH0
    PWM_10 = (2 << TPM_SHIFT) | (1)   // TPM2 CH1
} PWMName;

#define CHANNELS_A_SHIFT    5
typedef enum {
    ADC0_SE0  =  0,
    ADC0_SE3  =  3,
    ADC0_SE4a =  (1 << CHANNELS_A_SHIFT) | (4),
    ADC0_SE4b =  4,
    ADC0_SE5b =  5,
    ADC0_SE6b =  6,
    ADC0_SE7a =  (1 << CHANNELS_A_SHIFT) | (7),
    ADC0_SE7b =  7,
    ADC0_SE8  =  8,
    ADC0_SE9  =  9,
    ADC0_SE11 = 11,
    ADC0_SE12 = 12,
    ADC0_SE13 = 13,
    ADC0_SE14 = 14,
    ADC0_SE15 = 15,
    ADC0_SE23 = 23
} ADCName;

typedef enum {
    DAC_0 = 0
} DACName;


typedef enum {
    SPI_0 = (int)SPI0_BASE,
    SPI_1 = (int)SPI1_BASE,
} SPIName;

// Default peripherals
#define MBED_SPI0         PTD2, PTD3, PTD1, PTD0

#define MBED_UART0        PTC4, PTC3
#define MBED_UART1        PTD3, PTD2
#define MBED_UARTUSB      PTA2, PTA1

#define MBED_I2C0         PTC9, PTC8
#define MBED_I2C1         PTE1, PTE0

#define MBED_ANALOGOUT0   PTE30

#define MBED_ANALOGIN0    PTC2
#define MBED_ANALOGIN1    PTB3
#define MBED_ANALOGIN2    PTB2
#define MBED_ANALOGIN3    PTB1
#define MBED_ANALOGIN4    PTB0

#define MBED_PWMOUT0      PTD4
#define MBED_PWMOUT1      PTA12
#define MBED_PWMOUT2      PTA4
#define MBED_PWMOUT3      PTA5
#define MBED_PWMOUT4      PTC8
#define MBED_PWMOUT5      PTC9

#ifdef __cplusplus
}
#endif

#endif