Mike Tomovich

Activity

Answer posted for Question: bed.h for TMP007 - Thanks Sanjiv, the other option is to just copy mbed.h from another project into the …
Mike Tomovich - 08 Feb 2016
Reply to Using protobuf/nanopb for communication between mbed and computer - Hey guys, got something working finally. I had a problem with my Nucleo board receiving …
Mike Tomovich - 09 Jan 2015
Reply to Using protobuf/nanopb for communication between mbed and computer - All, I've been talking to Petteri, the developer behind protobufs, about my issues. The discussion …
Mike Tomovich - 08 Jan 2015
Reply to Using protobuf/nanopb for communication between mbed and computer - I'll try this out and report back my findings, thanks Andy.
Mike Tomovich - 07 Jan 2015
Reply to Using protobuf/nanopb for communication between mbed and computer - Tomas, did you ever end up figuring this out?
Mike Tomovich - 07 Jan 2015
New program: TMP007 - Driver for TI TMP007 thermopile. Reads object temperature, internal temperature, and sensor voltage.
Mike Tomovich - 29 Oct 2014
Question asked: What happens if I call timer.start() and then timer.start() again?: What happens if I call timer.start() and then timer.start() again before reading the time? Does …
Mike Tomovich - 09 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - One more thing worth noting, I was having some trouble with the Serial port right …
Mike Tomovich - 03 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - UPDATE: I was able to figure out what Erik meant and modify the startup_STM32F030.s file …
Mike Tomovich - 03 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - Erik, I'm a bit confused about how to modify the startup_stm32f030.s file you mention in …
Mike Tomovich - 03 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - Missed your earlier post somehow, I'll try that and report my findings here. Thanks Erik. …
Mike Tomovich - 03 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - Great advice, it shed some light on the problem. For one, the device ID of …
Mike Tomovich - 03 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - Bad news, looks like something wasn't working after all. I had removed the jumpers from …
Mike Tomovich - 02 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - Wim, thanks again for the help! I'm looking at the pin with a scope, and …
Mike Tomovich - 02 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - Ended up getting a program to flash over. It was a bad JTAG header. Tried …
Mike Tomovich - 02 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - I removed the button, still no luck.
Mike Tomovich - 02 Oct 2014
Reply to Help getting a custom MBED board to work (can't flash a binary) - Target MCU has power, I'll check the switch now. I'm not sure how to check …
Mike Tomovich - 02 Oct 2014
New topic Help getting a custom MBED board to work (can't flash a binary) - I just received some PCBs back from fabrication and assembly, and I'm trying to flash …
Mike Tomovich - 02 Oct 2014
Library updated: Tilt to Pour - Tilt to pour working in interrupt loop.
Mike Tomovich - 04 Sep 2014
Library updated: Accelerometer + Motor Driver Porting - Updated with initial code.
Mike Tomovich - 03 Sep 2014