USB device stack with Nucleo F401RE support. NOTE: the default clock config needs to be changed to in order for USB to work.

Fork of USBDevice by Tomas Cerskus

Slightly modified original USBDevice library to support F401RE.

On F401RE the data pins of your USB connector should be attached to PA12 (D+) and PA11(D-). It is also required to connect the +5V USB line to PA9.

F401RE requires 48MHz clock for USB. Therefore in order for this to work you will need to change the default clock settings:

Clock settings for USB

#include "stm32f4xx_hal.h"

RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = 16;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLM = 16;
RCC_OscInitStruct.PLL.PLLN = 336;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
RCC_OscInitStruct.PLL.PLLQ = 7;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
    error("RTC error: LSI clock initialization failed."); 
}

NOTE: Changing the clock frequency might affect the behavior of other libraries. I only tested the Serial library.

UPDATE: Clock settings should not to be changed anymore! Looks like the newer mbed library has the required clock enabled.

USBSerial/USBCDC.h

Committer:
tolaipner
Date:
2014-03-30
Revision:
24:4ed3e25c3edc
Parent:
19:fcb63a105965

File content as of revision 24:4ed3e25c3edc:

/* Copyright (c) 2010-2011 mbed.org, MIT License
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
* and associated documentation files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/

#ifndef USBCDC_H
#define USBCDC_H

/* These headers are included for child class. */
#include "USBEndpoints.h"
#include "USBDescriptor.h"
#include "USBDevice_Types.h"

#include "USBDevice.h"

class USBCDC: public USBDevice {
public:

    /*
    * Constructor
    *
    * @param vendor_id Your vendor_id
    * @param product_id Your product_id
    * @param product_release Your preoduct_release
    * @param connect_blocking define if the connection must be blocked if USB not plugged in
    */
    USBCDC(uint16_t vendor_id, uint16_t product_id, uint16_t product_release, bool connect_blocking);

protected:
    
    /*
    * Get device descriptor. Warning: this method has to store the length of the report descriptor in reportLength.
    *
    * @returns pointer to the device descriptor
    */
    virtual uint8_t * deviceDesc();
    
    /*
    * Get string product descriptor
    *
    * @returns pointer to the string product descriptor
    */
    virtual uint8_t * stringIproductDesc();
    
    /*
    * Get string interface descriptor
    *
    * @returns pointer to the string interface descriptor
    */
    virtual uint8_t * stringIinterfaceDesc();
    
    /*
    * Get configuration descriptor
    *
    * @returns pointer to the configuration descriptor
    */
    virtual uint8_t * configurationDesc();
    
    /*
    * Send a buffer
    *
    * @param endpoint endpoint which will be sent the buffer
    * @param buffer buffer to be sent
    * @param size length of the buffer
    * @returns true if successful
    */
    bool send(uint8_t * buffer, uint32_t size);
    
    /*
    * Read a buffer from a certain endpoint. Warning: blocking
    *
    * @param endpoint endpoint to read
    * @param buffer buffer where will be stored bytes
    * @param size the number of bytes read will be stored in *size
    * @param maxSize the maximum length that can be read
    * @returns true if successful
    */
    bool readEP(uint8_t * buffer, uint32_t * size);
    
    /*
    * Read a buffer from a certain endpoint. Warning: non blocking
    *
    * @param endpoint endpoint to read
    * @param buffer buffer where will be stored bytes
    * @param size the number of bytes read will be stored in *size
    * @param maxSize the maximum length that can be read
    * @returns true if successful
    */
    bool readEP_NB(uint8_t * buffer, uint32_t * size);

    /*
    * Called by USBCallback_requestCompleted when CDC line coding is changed
    * Warning: Called in ISR
    *
    * @param baud The baud rate
    * @param bits The number of bits in a word (5-8)
    * @param parity The parity
    * @param stop The number of stop bits (1 or 2)
    */
    virtual void lineCodingChanged(int baud, int bits, int parity, int stop) {};
    
protected:
    virtual bool USBCallback_request();
    virtual void USBCallback_requestCompleted(uint8_t *buf, uint32_t length);
    virtual bool USBCallback_setConfiguration(uint8_t configuration);
    volatile bool terminal_connected;

};

#endif