Tomas Cerskus / USBDevice

USB device stack with Nucleo F401RE support. NOTE: the default clock config needs to be changed to in order for USB to work.

Fork of USBDevice by Tomas Cerskus

Slightly modified original USBDevice library to support F401RE.

On F401RE the data pins of your USB connector should be attached to PA12 (D+) and PA11(D-). It is also required to connect the +5V USB line to PA9.

F401RE requires 48MHz clock for USB. Therefore in order for this to work you will need to change the default clock settings:

Clock settings for USB

#include "stm32f4xx_hal.h"

RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSICalibrationValue = 16;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLM = 16;
RCC_OscInitStruct.PLL.PLLN = 336;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
RCC_OscInitStruct.PLL.PLLQ = 7;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
    error("RTC error: LSI clock initialization failed."); 
}

NOTE: Changing the clock frequency might affect the behavior of other libraries. I only tested the Serial library.

UPDATE: Clock settings should not to be changed anymore! Looks like the newer mbed library has the required clock enabled.

Diff: USBDevice/USBHAL.h

Revision:
16:4f6df64750bd
Parent:
11:eeb3cbbaa996
--- a/USBDevice/USBHAL.h	Tue Nov 05 09:45:23 2013 +0000
+++ b/USBDevice/USBHAL.h	Thu Dec 05 13:00:15 2013 +0000
@@ -74,9 +74,9 @@
     virtual bool EP2_IN_callback(){return false;};
     virtual bool EP3_OUT_callback(){return false;};
     virtual bool EP3_IN_callback(){return false;};
+#if !defined(TARGET_STM32F4)
     virtual bool EP4_OUT_callback(){return false;};
     virtual bool EP4_IN_callback(){return false;};
-    
 #if !defined(TARGET_LPC11U24)
     virtual bool EP5_OUT_callback(){return false;};
     virtual bool EP5_IN_callback(){return false;};
@@ -101,6 +101,7 @@
     virtual bool EP15_OUT_callback(){return false;};
     virtual bool EP15_IN_callback(){return false;};
 #endif
+#endif
     
 private:
     void usbisr(void);
@@ -109,6 +110,8 @@
 
 #if defined(TARGET_LPC11U24)
         bool (USBHAL::*epCallback[10 - 2])(void);
+#elif defined(TARGET_STM32F4XX)
+        bool (USBHAL::*epCallback[8 - 2])(void);
 #else
         bool (USBHAL::*epCallback[32 - 2])(void);
 #endif