USB device stack with Nucleo F401RE support. NOTE: the default clock config needs to be changed to in order for USB to work.
Fork of USBDevice by
Slightly modified original USBDevice library to support F401RE.
On F401RE the data pins of your USB connector should be attached to PA12 (D+) and PA11(D-). It is also required to connect the +5V USB line to PA9.
F401RE requires 48MHz clock for USB. Therefore in order for this to work you will need to change the default clock settings:
Clock settings for USB
#include "stm32f4xx_hal.h" RCC_OscInitTypeDef RCC_OscInitStruct; RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI; RCC_OscInitStruct.HSIState = RCC_HSI_ON; RCC_OscInitStruct.HSICalibrationValue = 16; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; RCC_OscInitStruct.PLL.PLLM = 16; RCC_OscInitStruct.PLL.PLLN = 336; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4; RCC_OscInitStruct.PLL.PLLQ = 7; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { error("RTC error: LSI clock initialization failed."); }
NOTE: Changing the clock frequency might affect the behavior of other libraries. I only tested the Serial library.
UPDATE: Clock settings should not to be changed anymore! Looks like the newer mbed library has the required clock enabled.
USBHID/USBHID.cpp@24:4ed3e25c3edc, 2014-03-30 (annotated)
- Committer:
- tolaipner
- Date:
- Sun Mar 30 07:30:18 2014 +0000
- Revision:
- 24:4ed3e25c3edc
- Parent:
- 21:ee9f2fa6bdbc
Added Nucleo F401RE support
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
samux | 1:80ab0d068708 | 1 | /* Copyright (c) 2010-2011 mbed.org, MIT License |
samux | 1:80ab0d068708 | 2 | * |
samux | 1:80ab0d068708 | 3 | * Permission is hereby granted, free of charge, to any person obtaining a copy of this software |
samux | 1:80ab0d068708 | 4 | * and associated documentation files (the "Software"), to deal in the Software without |
samux | 1:80ab0d068708 | 5 | * restriction, including without limitation the rights to use, copy, modify, merge, publish, |
samux | 1:80ab0d068708 | 6 | * distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the |
samux | 1:80ab0d068708 | 7 | * Software is furnished to do so, subject to the following conditions: |
samux | 1:80ab0d068708 | 8 | * |
samux | 1:80ab0d068708 | 9 | * The above copyright notice and this permission notice shall be included in all copies or |
samux | 1:80ab0d068708 | 10 | * substantial portions of the Software. |
samux | 1:80ab0d068708 | 11 | * |
samux | 1:80ab0d068708 | 12 | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING |
samux | 1:80ab0d068708 | 13 | * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
samux | 1:80ab0d068708 | 14 | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, |
samux | 1:80ab0d068708 | 15 | * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
samux | 1:80ab0d068708 | 16 | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. |
samux | 1:80ab0d068708 | 17 | */ |
samux | 1:80ab0d068708 | 18 | |
samux | 1:80ab0d068708 | 19 | #include "stdint.h" |
samux | 1:80ab0d068708 | 20 | #include "USBHAL.h" |
samux | 1:80ab0d068708 | 21 | #include "USBHID.h" |
samux | 1:80ab0d068708 | 22 | |
samux | 1:80ab0d068708 | 23 | |
samux | 1:80ab0d068708 | 24 | USBHID::USBHID(uint8_t output_report_length, uint8_t input_report_length, uint16_t vendor_id, uint16_t product_id, uint16_t product_release, bool connect): USBDevice(vendor_id, product_id, product_release) |
samux | 1:80ab0d068708 | 25 | { |
samux | 1:80ab0d068708 | 26 | output_length = output_report_length; |
samux | 1:80ab0d068708 | 27 | input_length = input_report_length; |
samux | 1:80ab0d068708 | 28 | if(connect) { |
samux | 1:80ab0d068708 | 29 | USBDevice::connect(); |
samux | 1:80ab0d068708 | 30 | } |
samux | 1:80ab0d068708 | 31 | } |
samux | 1:80ab0d068708 | 32 | |
samux | 1:80ab0d068708 | 33 | |
samux | 1:80ab0d068708 | 34 | bool USBHID::send(HID_REPORT *report) |
samux | 1:80ab0d068708 | 35 | { |
samux | 1:80ab0d068708 | 36 | return write(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE); |
samux | 1:80ab0d068708 | 37 | } |
samux | 1:80ab0d068708 | 38 | |
samux | 1:80ab0d068708 | 39 | bool USBHID::sendNB(HID_REPORT *report) |
samux | 1:80ab0d068708 | 40 | { |
samux | 1:80ab0d068708 | 41 | return writeNB(EPINT_IN, report->data, report->length, MAX_HID_REPORT_SIZE); |
samux | 1:80ab0d068708 | 42 | } |
samux | 1:80ab0d068708 | 43 | |
samux | 1:80ab0d068708 | 44 | |
samux | 1:80ab0d068708 | 45 | bool USBHID::read(HID_REPORT *report) |
samux | 1:80ab0d068708 | 46 | { |
samux | 1:80ab0d068708 | 47 | uint32_t bytesRead = 0; |
samux | 1:80ab0d068708 | 48 | bool result; |
samux | 1:80ab0d068708 | 49 | result = USBDevice::readEP(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE); |
samux | 1:80ab0d068708 | 50 | if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE)) |
samux | 1:80ab0d068708 | 51 | return false; |
samux | 1:80ab0d068708 | 52 | report->length = bytesRead; |
samux | 1:80ab0d068708 | 53 | return result; |
samux | 1:80ab0d068708 | 54 | } |
samux | 1:80ab0d068708 | 55 | |
samux | 1:80ab0d068708 | 56 | |
samux | 1:80ab0d068708 | 57 | bool USBHID::readNB(HID_REPORT *report) |
samux | 1:80ab0d068708 | 58 | { |
samux | 1:80ab0d068708 | 59 | uint32_t bytesRead = 0; |
samux | 1:80ab0d068708 | 60 | bool result; |
samux | 1:80ab0d068708 | 61 | result = USBDevice::readEP_NB(EPINT_OUT, report->data, &bytesRead, MAX_HID_REPORT_SIZE); |
mbed_official | 21:ee9f2fa6bdbc | 62 | // if readEP_NB did not succeed, does not issue a readStart |
mbed_official | 21:ee9f2fa6bdbc | 63 | if (!result) |
mbed_official | 21:ee9f2fa6bdbc | 64 | return false; |
samux | 1:80ab0d068708 | 65 | report->length = bytesRead; |
samux | 1:80ab0d068708 | 66 | if(!readStart(EPINT_OUT, MAX_HID_REPORT_SIZE)) |
samux | 1:80ab0d068708 | 67 | return false; |
samux | 1:80ab0d068708 | 68 | return result; |
samux | 1:80ab0d068708 | 69 | } |
samux | 1:80ab0d068708 | 70 | |
samux | 1:80ab0d068708 | 71 | |
samux | 1:80ab0d068708 | 72 | uint16_t USBHID::reportDescLength() { |
samux | 1:80ab0d068708 | 73 | reportDesc(); |
samux | 1:80ab0d068708 | 74 | return reportLength; |
samux | 1:80ab0d068708 | 75 | } |
samux | 1:80ab0d068708 | 76 | |
samux | 1:80ab0d068708 | 77 | |
samux | 1:80ab0d068708 | 78 | |
samux | 1:80ab0d068708 | 79 | // |
samux | 1:80ab0d068708 | 80 | // Route callbacks from lower layers to class(es) |
samux | 1:80ab0d068708 | 81 | // |
samux | 1:80ab0d068708 | 82 | |
samux | 1:80ab0d068708 | 83 | |
samux | 1:80ab0d068708 | 84 | // Called in ISR context |
samux | 1:80ab0d068708 | 85 | // Called by USBDevice on Endpoint0 request |
samux | 1:80ab0d068708 | 86 | // This is used to handle extensions to standard requests |
samux | 1:80ab0d068708 | 87 | // and class specific requests |
samux | 1:80ab0d068708 | 88 | // Return true if class handles this request |
samux | 1:80ab0d068708 | 89 | bool USBHID::USBCallback_request() { |
samux | 1:80ab0d068708 | 90 | bool success = false; |
samux | 1:80ab0d068708 | 91 | CONTROL_TRANSFER * transfer = getTransferPtr(); |
samux | 1:80ab0d068708 | 92 | uint8_t *hidDescriptor; |
samux | 1:80ab0d068708 | 93 | |
samux | 1:80ab0d068708 | 94 | // Process additional standard requests |
samux | 1:80ab0d068708 | 95 | |
samux | 1:80ab0d068708 | 96 | if ((transfer->setup.bmRequestType.Type == STANDARD_TYPE)) |
samux | 1:80ab0d068708 | 97 | { |
samux | 1:80ab0d068708 | 98 | switch (transfer->setup.bRequest) |
samux | 1:80ab0d068708 | 99 | { |
samux | 1:80ab0d068708 | 100 | case GET_DESCRIPTOR: |
samux | 1:80ab0d068708 | 101 | switch (DESCRIPTOR_TYPE(transfer->setup.wValue)) |
samux | 1:80ab0d068708 | 102 | { |
samux | 1:80ab0d068708 | 103 | case REPORT_DESCRIPTOR: |
samux | 1:80ab0d068708 | 104 | if ((reportDesc() != NULL) \ |
samux | 1:80ab0d068708 | 105 | && (reportDescLength() != 0)) |
samux | 1:80ab0d068708 | 106 | { |
samux | 1:80ab0d068708 | 107 | transfer->remaining = reportDescLength(); |
samux | 1:80ab0d068708 | 108 | transfer->ptr = reportDesc(); |
samux | 1:80ab0d068708 | 109 | transfer->direction = DEVICE_TO_HOST; |
samux | 1:80ab0d068708 | 110 | success = true; |
samux | 1:80ab0d068708 | 111 | } |
samux | 1:80ab0d068708 | 112 | break; |
samux | 1:80ab0d068708 | 113 | case HID_DESCRIPTOR: |
samux | 1:80ab0d068708 | 114 | // Find the HID descriptor, after the configuration descriptor |
samux | 1:80ab0d068708 | 115 | hidDescriptor = findDescriptor(HID_DESCRIPTOR); |
samux | 1:80ab0d068708 | 116 | if (hidDescriptor != NULL) |
samux | 1:80ab0d068708 | 117 | { |
samux | 1:80ab0d068708 | 118 | transfer->remaining = HID_DESCRIPTOR_LENGTH; |
samux | 1:80ab0d068708 | 119 | transfer->ptr = hidDescriptor; |
samux | 1:80ab0d068708 | 120 | transfer->direction = DEVICE_TO_HOST; |
samux | 1:80ab0d068708 | 121 | success = true; |
samux | 1:80ab0d068708 | 122 | } |
samux | 1:80ab0d068708 | 123 | break; |
samux | 1:80ab0d068708 | 124 | |
samux | 1:80ab0d068708 | 125 | default: |
samux | 1:80ab0d068708 | 126 | break; |
samux | 1:80ab0d068708 | 127 | } |
samux | 1:80ab0d068708 | 128 | break; |
samux | 1:80ab0d068708 | 129 | default: |
samux | 1:80ab0d068708 | 130 | break; |
samux | 1:80ab0d068708 | 131 | } |
samux | 1:80ab0d068708 | 132 | } |
samux | 1:80ab0d068708 | 133 | |
samux | 1:80ab0d068708 | 134 | // Process class-specific requests |
samux | 1:80ab0d068708 | 135 | |
samux | 1:80ab0d068708 | 136 | if (transfer->setup.bmRequestType.Type == CLASS_TYPE) |
samux | 1:80ab0d068708 | 137 | { |
samux | 1:80ab0d068708 | 138 | switch (transfer->setup.bRequest) |
samux | 1:80ab0d068708 | 139 | { |
samux | 1:80ab0d068708 | 140 | case SET_REPORT: |
samux | 1:80ab0d068708 | 141 | // First byte will be used for report ID |
samux | 1:80ab0d068708 | 142 | outputReport.data[0] = transfer->setup.wValue & 0xff; |
samux | 1:80ab0d068708 | 143 | outputReport.length = transfer->setup.wLength + 1; |
samux | 1:80ab0d068708 | 144 | |
samux | 1:80ab0d068708 | 145 | transfer->remaining = sizeof(outputReport.data) - 1; |
samux | 1:80ab0d068708 | 146 | transfer->ptr = &outputReport.data[1]; |
samux | 1:80ab0d068708 | 147 | transfer->direction = HOST_TO_DEVICE; |
samux | 1:80ab0d068708 | 148 | transfer->notify = true; |
samux | 1:80ab0d068708 | 149 | success = true; |
samux | 1:80ab0d068708 | 150 | default: |
samux | 1:80ab0d068708 | 151 | break; |
samux | 1:80ab0d068708 | 152 | } |
samux | 1:80ab0d068708 | 153 | } |
samux | 1:80ab0d068708 | 154 | |
samux | 1:80ab0d068708 | 155 | return success; |
samux | 1:80ab0d068708 | 156 | } |
samux | 1:80ab0d068708 | 157 | |
samux | 1:80ab0d068708 | 158 | |
samux | 1:80ab0d068708 | 159 | #define DEFAULT_CONFIGURATION (1) |
samux | 1:80ab0d068708 | 160 | |
samux | 1:80ab0d068708 | 161 | |
samux | 1:80ab0d068708 | 162 | // Called in ISR context |
samux | 1:80ab0d068708 | 163 | // Set configuration. Return false if the |
samux | 1:80ab0d068708 | 164 | // configuration is not supported |
samux | 1:80ab0d068708 | 165 | bool USBHID::USBCallback_setConfiguration(uint8_t configuration) { |
samux | 1:80ab0d068708 | 166 | if (configuration != DEFAULT_CONFIGURATION) { |
samux | 1:80ab0d068708 | 167 | return false; |
samux | 1:80ab0d068708 | 168 | } |
samux | 1:80ab0d068708 | 169 | |
samux | 1:80ab0d068708 | 170 | // Configure endpoints > 0 |
samux | 1:80ab0d068708 | 171 | addEndpoint(EPINT_IN, MAX_PACKET_SIZE_EPINT); |
samux | 1:80ab0d068708 | 172 | addEndpoint(EPINT_OUT, MAX_PACKET_SIZE_EPINT); |
samux | 1:80ab0d068708 | 173 | |
samux | 1:80ab0d068708 | 174 | // We activate the endpoint to be able to recceive data |
samux | 1:80ab0d068708 | 175 | readStart(EPINT_OUT, MAX_PACKET_SIZE_EPINT); |
samux | 1:80ab0d068708 | 176 | return true; |
samux | 1:80ab0d068708 | 177 | } |
samux | 1:80ab0d068708 | 178 | |
samux | 1:80ab0d068708 | 179 | |
samux | 1:80ab0d068708 | 180 | uint8_t * USBHID::stringIinterfaceDesc() { |
samux | 1:80ab0d068708 | 181 | static uint8_t stringIinterfaceDescriptor[] = { |
samux | 1:80ab0d068708 | 182 | 0x08, //bLength |
samux | 1:80ab0d068708 | 183 | STRING_DESCRIPTOR, //bDescriptorType 0x03 |
samux | 1:80ab0d068708 | 184 | 'H',0,'I',0,'D',0, //bString iInterface - HID |
samux | 1:80ab0d068708 | 185 | }; |
samux | 1:80ab0d068708 | 186 | return stringIinterfaceDescriptor; |
samux | 1:80ab0d068708 | 187 | } |
samux | 1:80ab0d068708 | 188 | |
samux | 1:80ab0d068708 | 189 | uint8_t * USBHID::stringIproductDesc() { |
samux | 1:80ab0d068708 | 190 | static uint8_t stringIproductDescriptor[] = { |
samux | 1:80ab0d068708 | 191 | 0x16, //bLength |
samux | 1:80ab0d068708 | 192 | STRING_DESCRIPTOR, //bDescriptorType 0x03 |
samux | 1:80ab0d068708 | 193 | 'H',0,'I',0,'D',0,' ',0,'D',0,'E',0,'V',0,'I',0,'C',0,'E',0 //bString iProduct - HID device |
samux | 1:80ab0d068708 | 194 | }; |
samux | 1:80ab0d068708 | 195 | return stringIproductDescriptor; |
samux | 1:80ab0d068708 | 196 | } |
samux | 1:80ab0d068708 | 197 | |
samux | 1:80ab0d068708 | 198 | |
samux | 1:80ab0d068708 | 199 | |
samux | 1:80ab0d068708 | 200 | uint8_t * USBHID::reportDesc() { |
samux | 1:80ab0d068708 | 201 | static uint8_t reportDescriptor[] = { |
samux | 1:80ab0d068708 | 202 | 0x06, LSB(0xFFAB), MSB(0xFFAB), |
samux | 1:80ab0d068708 | 203 | 0x0A, LSB(0x0200), MSB(0x0200), |
samux | 1:80ab0d068708 | 204 | 0xA1, 0x01, // Collection 0x01 |
samux | 1:80ab0d068708 | 205 | 0x75, 0x08, // report size = 8 bits |
samux | 1:80ab0d068708 | 206 | 0x15, 0x00, // logical minimum = 0 |
samux | 1:80ab0d068708 | 207 | 0x26, 0xFF, 0x00, // logical maximum = 255 |
emilmont | 10:1e3d126a322b | 208 | 0x95, input_length, // report count |
samux | 1:80ab0d068708 | 209 | 0x09, 0x01, // usage |
samux | 1:80ab0d068708 | 210 | 0x81, 0x02, // Input (array) |
emilmont | 10:1e3d126a322b | 211 | 0x95, output_length,// report count |
samux | 1:80ab0d068708 | 212 | 0x09, 0x02, // usage |
samux | 1:80ab0d068708 | 213 | 0x91, 0x02, // Output (array) |
samux | 1:80ab0d068708 | 214 | 0xC0 // end collection |
samux | 1:80ab0d068708 | 215 | |
samux | 1:80ab0d068708 | 216 | }; |
samux | 1:80ab0d068708 | 217 | reportLength = sizeof(reportDescriptor); |
samux | 1:80ab0d068708 | 218 | return reportDescriptor; |
samux | 1:80ab0d068708 | 219 | } |
samux | 1:80ab0d068708 | 220 | |
samux | 1:80ab0d068708 | 221 | #define DEFAULT_CONFIGURATION (1) |
samux | 1:80ab0d068708 | 222 | #define TOTAL_DESCRIPTOR_LENGTH ((1 * CONFIGURATION_DESCRIPTOR_LENGTH) \ |
samux | 1:80ab0d068708 | 223 | + (1 * INTERFACE_DESCRIPTOR_LENGTH) \ |
samux | 1:80ab0d068708 | 224 | + (1 * HID_DESCRIPTOR_LENGTH) \ |
samux | 1:80ab0d068708 | 225 | + (2 * ENDPOINT_DESCRIPTOR_LENGTH)) |
samux | 1:80ab0d068708 | 226 | |
samux | 1:80ab0d068708 | 227 | uint8_t * USBHID::configurationDesc() { |
samux | 1:80ab0d068708 | 228 | static uint8_t configurationDescriptor[] = { |
samux | 1:80ab0d068708 | 229 | CONFIGURATION_DESCRIPTOR_LENGTH,// bLength |
samux | 1:80ab0d068708 | 230 | CONFIGURATION_DESCRIPTOR, // bDescriptorType |
samux | 1:80ab0d068708 | 231 | LSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (LSB) |
samux | 1:80ab0d068708 | 232 | MSB(TOTAL_DESCRIPTOR_LENGTH), // wTotalLength (MSB) |
samux | 1:80ab0d068708 | 233 | 0x01, // bNumInterfaces |
samux | 1:80ab0d068708 | 234 | DEFAULT_CONFIGURATION, // bConfigurationValue |
samux | 1:80ab0d068708 | 235 | 0x00, // iConfiguration |
samux | 1:80ab0d068708 | 236 | C_RESERVED | C_SELF_POWERED, // bmAttributes |
samux | 1:80ab0d068708 | 237 | C_POWER(0), // bMaxPower |
samux | 1:80ab0d068708 | 238 | |
samux | 1:80ab0d068708 | 239 | INTERFACE_DESCRIPTOR_LENGTH, // bLength |
samux | 1:80ab0d068708 | 240 | INTERFACE_DESCRIPTOR, // bDescriptorType |
samux | 1:80ab0d068708 | 241 | 0x00, // bInterfaceNumber |
samux | 1:80ab0d068708 | 242 | 0x00, // bAlternateSetting |
samux | 1:80ab0d068708 | 243 | 0x02, // bNumEndpoints |
samux | 1:80ab0d068708 | 244 | HID_CLASS, // bInterfaceClass |
samux | 1:80ab0d068708 | 245 | HID_SUBCLASS_NONE, // bInterfaceSubClass |
samux | 1:80ab0d068708 | 246 | HID_PROTOCOL_NONE, // bInterfaceProtocol |
samux | 1:80ab0d068708 | 247 | 0x00, // iInterface |
samux | 1:80ab0d068708 | 248 | |
samux | 1:80ab0d068708 | 249 | HID_DESCRIPTOR_LENGTH, // bLength |
samux | 1:80ab0d068708 | 250 | HID_DESCRIPTOR, // bDescriptorType |
samux | 1:80ab0d068708 | 251 | LSB(HID_VERSION_1_11), // bcdHID (LSB) |
samux | 1:80ab0d068708 | 252 | MSB(HID_VERSION_1_11), // bcdHID (MSB) |
samux | 1:80ab0d068708 | 253 | 0x00, // bCountryCode |
samux | 1:80ab0d068708 | 254 | 0x01, // bNumDescriptors |
samux | 1:80ab0d068708 | 255 | REPORT_DESCRIPTOR, // bDescriptorType |
bogdanm | 11:eeb3cbbaa996 | 256 | (uint8_t)(LSB(this->reportDescLength())), // wDescriptorLength (LSB) |
bogdanm | 11:eeb3cbbaa996 | 257 | (uint8_t)(MSB(this->reportDescLength())), // wDescriptorLength (MSB) |
samux | 1:80ab0d068708 | 258 | |
samux | 1:80ab0d068708 | 259 | ENDPOINT_DESCRIPTOR_LENGTH, // bLength |
samux | 1:80ab0d068708 | 260 | ENDPOINT_DESCRIPTOR, // bDescriptorType |
samux | 1:80ab0d068708 | 261 | PHY_TO_DESC(EPINT_IN), // bEndpointAddress |
samux | 1:80ab0d068708 | 262 | E_INTERRUPT, // bmAttributes |
samux | 1:80ab0d068708 | 263 | LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB) |
samux | 1:80ab0d068708 | 264 | MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB) |
samux | 1:80ab0d068708 | 265 | 1, // bInterval (milliseconds) |
samux | 1:80ab0d068708 | 266 | |
samux | 1:80ab0d068708 | 267 | ENDPOINT_DESCRIPTOR_LENGTH, // bLength |
samux | 1:80ab0d068708 | 268 | ENDPOINT_DESCRIPTOR, // bDescriptorType |
samux | 1:80ab0d068708 | 269 | PHY_TO_DESC(EPINT_OUT), // bEndpointAddress |
samux | 1:80ab0d068708 | 270 | E_INTERRUPT, // bmAttributes |
samux | 1:80ab0d068708 | 271 | LSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (LSB) |
samux | 1:80ab0d068708 | 272 | MSB(MAX_PACKET_SIZE_EPINT), // wMaxPacketSize (MSB) |
samux | 1:80ab0d068708 | 273 | 1, // bInterval (milliseconds) |
samux | 1:80ab0d068708 | 274 | }; |
samux | 1:80ab0d068708 | 275 | return configurationDescriptor; |
samux | 1:80ab0d068708 | 276 | } |