Ken Todotani
mbed library sources
Fork of
mbed-src
by 
mbed official
Revision 250:a49055e7a707, committed 2014-07-08
- Comitter:
- mbed_official
- Date:
- Tue Jul 08 11:15:08 2014 +0100
- Parent:
- 249:5706c6e2db45
- Child:
- 251:de9a1e4ffd79
- Commit message:
- Synchronized with git revision 3197042b65f8d28e856e1a7812d45e2fbe80e3f1
Full URL: https://github.com/mbedmicro/mbed/commit/3197042b65f8d28e856e1a7812d45e2fbe80e3f1/
error.h -> mbed_error.h
Changed in this revision
--- a/api/error.h Wed Jul 02 13:45:08 2014 +0100
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,66 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_ERROR_H
-#define MBED_ERROR_H
-
-/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
- *
- * @code
- * #error "That shouldn't have happened!"
- * @endcode
- *
- * If the compiler evaluates this line, it will report the error and stop the compile.
- *
- * For example, you could use this to check some user-defined compile-time variables:
- *
- * @code
- * #define NUM_PORTS 7
- * #if (NUM_PORTS > 4)
- * #error "NUM_PORTS must be less than 4"
- * #endif
- * @endcode
- *
- * Reporting Run-Time Errors:
- * To generate a fatal run-time error, you can use the mbed error() function.
- *
- * @code
- * error("That shouldn't have happened!");
- * @endcode
- *
- * If the mbed running the program executes this function, it will print the
- * message via the USB serial port, and then die with the blue lights of death!
- *
- * The message can use printf-style formatting, so you can report variables in the
- * message too. For example, you could use this to check a run-time condition:
- *
- * @code
- * if(x >= 5) {
- * error("expected x to be less than 5, but got %d", x);
- * }
- * #endcode
- */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void error(const char* format, ...);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/api/mbed.h Wed Jul 02 13:45:08 2014 +0100 +++ b/api/mbed.h Tue Jul 08 11:15:08 2014 +0100 @@ -25,7 +25,7 @@ #include <time.h> // mbed Debug libraries -#include "error.h" +#include "mbed_error.h" #include "mbed_interface.h" // mbed Peripheral components
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/api/mbed_error.h Tue Jul 08 11:15:08 2014 +0100
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_ERROR_H
+#define MBED_ERROR_H
+
+/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
+ *
+ * @code
+ * #error "That shouldn't have happened!"
+ * @endcode
+ *
+ * If the compiler evaluates this line, it will report the error and stop the compile.
+ *
+ * For example, you could use this to check some user-defined compile-time variables:
+ *
+ * @code
+ * #define NUM_PORTS 7
+ * #if (NUM_PORTS > 4)
+ * #error "NUM_PORTS must be less than 4"
+ * #endif
+ * @endcode
+ *
+ * Reporting Run-Time Errors:
+ * To generate a fatal run-time error, you can use the mbed error() function.
+ *
+ * @code
+ * error("That shouldn't have happened!");
+ * @endcode
+ *
+ * If the mbed running the program executes this function, it will print the
+ * message via the USB serial port, and then die with the blue lights of death!
+ *
+ * The message can use printf-style formatting, so you can report variables in the
+ * message too. For example, you could use this to check a run-time condition:
+ *
+ * @code
+ * if(x >= 5) {
+ * error("expected x to be less than 5, but got %d", x);
+ * }
+ * #endcode
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void error(const char* format, ...);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- a/common/error.c Wed Jul 02 13:45:08 2014 +0100 +++ b/common/error.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include <stdarg.h> #include "device.h" #include "toolchain.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_STDIO_MESSAGES #include <stdio.h> #endif
--- a/common/mbed_interface.c Wed Jul 02 13:45:08 2014 +0100 +++ b/common/mbed_interface.c Tue Jul 08 11:15:08 2014 +0100 @@ -19,7 +19,7 @@ #include "gpio_api.h" #include "wait_api.h" #include "semihost_api.h" -#include "error.h" +#include "mbed_error.h" #include "toolchain.h" #if DEVICE_SEMIHOST
--- a/common/pinmap_common.c Wed Jul 02 13:45:08 2014 +0100
+++ b/common/pinmap_common.c Tue Jul 08 11:15:08 2014 +0100
@@ -14,7 +14,7 @@
* limitations under the License.
*/
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pinmap_pinout(PinName pin, const PinMap *map) {
if (pin == NC)
--- a/common/retarget.cpp Wed Jul 02 13:45:08 2014 +0100
+++ b/common/retarget.cpp Tue Jul 08 11:15:08 2014 +0100
@@ -383,7 +383,7 @@
#if defined(TOOLCHAIN_GCC)
/* prevents the exception handling name demangling code getting pulled in */
-#include "error.h"
+#include "mbed_error.h"
namespace __gnu_cxx {
void __verbose_terminate_handler() {
error("Exception");
--- a/targets/hal/TARGET_Freescale/TARGET_K20D5M/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_Freescale/TARGET_K20D5M/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 160
--- a/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL05Z/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL05Z/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -18,7 +18,7 @@ #include "gpio_irq_api.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 64 // 31 pins on 2 ports
--- a/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -18,7 +18,7 @@ #include "gpio_irq_api.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 64
--- a/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_Freescale/TARGET_KLXX/TARGET_KL46Z/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -18,7 +18,7 @@ #include "gpio_irq_api.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 96
--- a/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/analogout_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/analogout_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define RANGE_12BIT 0xFFF
--- a/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -20,7 +20,7 @@ #include "gpio_api.h" #include "fsl_gpio_hal.h" #include "fsl_port_hal.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 160
--- a/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/pinmap.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/pinmap.c Tue Jul 08 11:15:08 2014 +0100 @@ -15,7 +15,7 @@ */ #include "mbed_assert.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #include "fsl_clock_manager.h" #include "fsl_port_hal.h"
--- a/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/spi_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_K64F/spi_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -19,7 +19,7 @@ #include "spi_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #include "fsl_clock_manager.h" #include "fsl_dspi_hal.h"
--- a/targets/hal/TARGET_NORDIC/TARGET_NRF51822/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NORDIC/TARGET_NRF51822/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 31
--- a/targets/hal/TARGET_NORDIC/TARGET_NRF51822/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NORDIC/TARGET_NRF51822/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -15,7 +15,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pin_function(PinName pin, int function) {
}
--- a/targets/hal/TARGET_NORDIC/TARGET_NRF51822/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NORDIC/TARGET_NRF51822/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "pwmout_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define NO_PWMS 3 #define TIMER_PRECISION 4 //4us ticks
--- a/targets/hal/TARGET_NORDIC/TARGET_NRF51822/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NORDIC/TARGET_NRF51822/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -18,7 +18,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_SPI_SCLK[] = {
{SPI_PSELSCK0 , SPI_0, 0x01},
--- a/targets/hal/TARGET_NXP/TARGET_LPC11U6X/analogin_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11U6X/analogin_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "analogin_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_ANALOGIN
--- a/targets/hal/TARGET_NXP/TARGET_LPC11U6X/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11U6X/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_INTERRUPTIN
--- a/targets/hal/TARGET_NXP/TARGET_LPC11U6X/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11U6X/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -15,7 +15,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pin_function(PinName pin, int function) {
MBED_ASSERT(pin != (PinName)NC);
--- a/targets/hal/TARGET_NXP/TARGET_LPC11U6X/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11U6X/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "pwmout_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PWMOUT
--- a/targets/hal/TARGET_NXP/TARGET_LPC11U6X/spi_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11U6X/spi_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -19,7 +19,7 @@ #include "spi_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_SPI
--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/analogin_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/analogin_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "analogin_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define ANALOGIN_MEDIAN_FILTER 1
--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -16,7 +16,7 @@ #include <stddef.h> #include "cmsis.h" #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 8 #define LPC_GPIO_X LPC_GPIO_PIN_INT
--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pinmap.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/pinmap.c Tue Jul 08 11:15:08 2014 +0100 @@ -15,7 +15,7 @@ */ #include "mbed_assert.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define LPC_IOCON0_BASE (LPC_IOCON_BASE) #define LPC_IOCON1_BASE (LPC_IOCON_BASE + 0x60)
--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -18,7 +18,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_SPI_SCLK[] = {
{P0_6 , SPI_0, 0x02},
--- a/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/TARGET_LPC11CXX/can_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/TARGET_LPC11CXX/can_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -16,7 +16,7 @@ #include "can_api.h" #include "cmsis.h" -#include "error.h" +#include "mbed_error.h" #include <math.h> #include <string.h>
--- a/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/analogin_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/analogin_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -17,7 +17,7 @@
#include "analogin_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_ADC[] = {
{P0_11, ADC0_0, 2},
--- a/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -16,7 +16,7 @@ #include <stddef.h> #include "cmsis.h" #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #include "gpio_api.h" // The chip is capable of 42 GPIO interrupts.
--- a/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/i2c_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/i2c_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -17,7 +17,7 @@
#include "i2c_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_I2C_SDA[] = {
{P0_5, I2C_0, 1},
--- a/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -15,7 +15,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pin_function(PinName pin, int function) {
MBED_ASSERT(pin != (PinName)NC);
--- a/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11XX_11CXX/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -18,7 +18,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_SPI_SCLK[] = {
{P0_6 , SPI_0, 0x02},
--- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/analogin_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/analogin_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "analogin_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define ANALOGIN_MEDIAN_FILTER 1
--- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -16,7 +16,7 @@ #include <stddef.h> #include "cmsis.h" #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 8 #define LPC_GPIO_X LPC_GPIO_PIN_INT
--- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/i2c_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/i2c_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -17,7 +17,7 @@
#include "i2c_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_I2C_SDA[] = {
{P0_5, I2C_0, 1},
--- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/pinmap.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/pinmap.c Tue Jul 08 11:15:08 2014 +0100 @@ -15,7 +15,7 @@ */ #include "mbed_assert.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define LPC_IOCON0_BASE (LPC_IOCON_BASE) #define LPC_IOCON1_BASE (LPC_IOCON_BASE + 0x60)
--- a/targets/hal/TARGET_NXP/TARGET_LPC13XX/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC13XX/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -18,7 +18,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_SPI_SCLK[] = {
{P0_6 , SPI_0, 0x02},
--- a/targets/hal/TARGET_NXP/TARGET_LPC15XX/can_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC15XX/can_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "can_api.h" #include "cmsis.h" -#include "error.h" +#include "mbed_error.h" #include <math.h> #include <string.h>
--- a/targets/hal/TARGET_NXP/TARGET_LPC15XX/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC15XX/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 8 #define LPC_GPIO_X LPC_PINT
--- a/targets/hal/TARGET_NXP/TARGET_LPC15XX/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC15XX/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -15,7 +15,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pin_function(PinName pin, int function) {
}
--- a/targets/hal/TARGET_NXP/TARGET_LPC15XX/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC15XX/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -17,7 +17,7 @@
#include "pwmout_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static LPC_SCT0_Type *SCTs[4] = {
(LPC_SCT0_Type*)LPC_SCT0,
--- a/targets/hal/TARGET_NXP/TARGET_LPC15XX/serial_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC15XX/serial_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -21,7 +21,7 @@ #include "serial_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" /****************************************************************************** * INITIALIZATION
--- a/targets/hal/TARGET_NXP/TARGET_LPC15XX/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC15XX/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -19,7 +19,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const SWM_Map SWM_SPI_SSEL[] = {
{4, 0},
--- a/targets/hal/TARGET_NXP/TARGET_LPC176X/ethernet_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC176X/ethernet_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -19,7 +19,7 @@ #include "cmsis.h" #include "mbed_interface.h" #include "toolchain.h" -#include "error.h" +#include "mbed_error.h" #define NEW_LOGIC 0 #define NEW_ETH_BUFFER 0
--- a/targets/hal/TARGET_NXP/TARGET_LPC176X/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC176X/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -16,7 +16,7 @@ #include <stddef.h> #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #include "cmsis.h" #define CHANNEL_NUM 48
--- a/targets/hal/TARGET_NXP/TARGET_LPC176X/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC176X/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -15,7 +15,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pin_function(PinName pin, int function) {
MBED_ASSERT(pin != (PinName)NC);
--- a/targets/hal/TARGET_NXP/TARGET_LPC176X/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC176X/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -19,7 +19,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_SPI_SCLK[] = {
{P0_7 , SPI_1, 2},
--- a/targets/hal/TARGET_NXP/TARGET_LPC23XX/ethernet_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC23XX/ethernet_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -19,7 +19,7 @@ #include "cmsis.h" #include "mbed_interface.h" #include "toolchain.h" -#include "error.h" +#include "mbed_error.h" #define NEW_LOGIC 0 #define NEW_ETH_BUFFER 0
--- a/targets/hal/TARGET_NXP/TARGET_LPC23XX/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC23XX/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -14,7 +14,7 @@ * limitations under the License. */ #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #include <stddef.h> #include "cmsis.h"
--- a/targets/hal/TARGET_NXP/TARGET_LPC23XX/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC23XX/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -15,7 +15,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pin_function(PinName pin, int function) {
MBED_ASSERT(pin != (PinName)NC);
--- a/targets/hal/TARGET_NXP/TARGET_LPC23XX/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC23XX/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -19,7 +19,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_SPI_SCLK[] = {
{P0_7 , SPI_1, 2},
--- a/targets/hal/TARGET_NXP/TARGET_LPC408X/analogin_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC408X/analogin_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "analogin_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define ANALOGIN_MEDIAN_FILTER 1
--- a/targets/hal/TARGET_NXP/TARGET_LPC408X/ethernet_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC408X/ethernet_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -19,7 +19,7 @@ #include "cmsis.h" #include "mbed_interface.h" #include "toolchain.h" -#include "error.h" +#include "mbed_error.h" #define NEW_LOGIC 0 #define NEW_ETH_BUFFER 0
--- a/targets/hal/TARGET_NXP/TARGET_LPC408X/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC408X/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -15,7 +15,7 @@ */ #include <stddef.h> #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #include "cmsis.h" #define CHANNEL_NUM 64
--- a/targets/hal/TARGET_NXP/TARGET_LPC408X/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC408X/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -15,7 +15,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pin_function(PinName pin, int function) {
MBED_ASSERT(pin != (PinName)NC);
--- a/targets/hal/TARGET_NXP/TARGET_LPC408X/serial_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC408X/serial_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -21,7 +21,7 @@ #include "serial_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" /****************************************************************************** * INITIALIZATION
--- a/targets/hal/TARGET_NXP/TARGET_LPC408X/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC408X/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -18,7 +18,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_SPI_SCLK[] = {
{P0_7 , SPI_1, 2},
--- a/targets/hal/TARGET_NXP/TARGET_LPC43XX/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ */ #include <stddef.h> #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #include "cmsis.h" /* The LPC43xx implements GPIO pin and group interrupts. Any pin in the
--- a/targets/hal/TARGET_NXP/TARGET_LPC43XX/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -17,7 +17,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
void pin_function(PinName pin, int function) {
MBED_ASSERT(pin != (PinName)NC);
--- a/targets/hal/TARGET_NXP/TARGET_LPC43XX/serial_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/serial_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -23,7 +23,7 @@ #include "serial_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" /****************************************************************************** * INITIALIZATION
--- a/targets/hal/TARGET_NXP/TARGET_LPC43XX/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -21,7 +21,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_SPI_SCLK[] = {
{P3_0 , SPI_0, (SCU_PINIO_FAST | 2)},
--- a/targets/hal/TARGET_NXP/TARGET_LPC81X/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC81X/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -17,7 +17,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" -#include "error.h" +#include "mbed_error.h" #define CHANNEL_NUM 8 #define LPC_GPIO_X LPC_PIN_INT
--- a/targets/hal/TARGET_NXP/TARGET_LPC81X/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC81X/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -15,7 +15,7 @@
*/
#include "mbed_assert.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
__IO uint32_t* IOCON_REGISTERS[18] = {
&LPC_IOCON->PIO0_0 , &LPC_IOCON->PIO0_1 , &LPC_IOCON->PIO0_2 ,
--- a/targets/hal/TARGET_NXP/TARGET_LPC81X/serial_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC81X/serial_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -21,7 +21,7 @@ #include "serial_api.h" #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" /****************************************************************************** * INITIALIZATION
--- a/targets/hal/TARGET_NXP/TARGET_LPC81X/spi_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC81X/spi_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -19,7 +19,7 @@
#include "spi_api.h"
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const SWM_Map SWM_SPI_SSEL[] = {
{4, 16},
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/analogin_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/analogin_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -32,7 +32,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
#include "wait_api.h"
static const PinMap PinMap_ADC[] = {
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// Enable GPIO clock and return GPIO base address
uint32_t Set_GPIO_Clock(uint32_t port_idx) {
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F051R8/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -33,7 +33,7 @@ #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F100RB/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F100RB/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F100RB/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F100RB/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F100RB/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_DISCO_F100RB/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "device.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// Alternate-function mapping
static const uint32_t AF_mapping[] = {
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F100RB/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F100RB/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "port_api.h" #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PORTIN || DEVICE_PORTOUT
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/i2c_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/i2c_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -34,7 +34,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
/* Timeout values for flags and events waiting loops. These timeouts are
not based on accurate values, they just guarantee that the application will
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// Enable GPIO clock and return GPIO base address
uint32_t Set_GPIO_Clock(uint32_t port_idx) {
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -33,7 +33,7 @@ #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_DISCO_F303VC/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -33,7 +33,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// TIM2 cannot be used because already used by the us_ticker
static const PinMap PinMap_PWM[] = {
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/analogout_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/analogout_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #include "stm32f4xx_hal.h" #define RANGE_12BIT (0xFFF)
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// GPIO mode look-up table
static const uint32_t gpio_mode[12] = {
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "port_api.h" #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PORTIN || DEVICE_PORTOUT
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -33,7 +33,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// TIM5 cannot be used because already used by the us_ticker
static const PinMap PinMap_PWM[] = {
--- a/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/rtc_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_DISCO_F407VG/rtc_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "rtc_api.h" #if DEVICE_RTC -#include "error.h" +#include "mbed_error.h" static int rtc_inited = 0;
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/analogin_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/analogin_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -32,7 +32,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
#include "wait_api.h"
static const PinMap PinMap_ADC[] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// Enable GPIO clock and return GPIO base address
uint32_t Set_GPIO_Clock(uint32_t port_idx) {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F030R8/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -33,7 +33,7 @@ #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/analogout_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/analogout_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define DAC_RANGE (0xFFF) // 12 bits
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// GPIO mode look-up table
static const uint32_t gpio_mode[12] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "port_api.h" #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PORTIN || DEVICE_PORTOUT
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -33,7 +33,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// TIM2 cannot be used because already used by the us_ticker
static const PinMap PinMap_PWM[] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/rtc_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F072RB/rtc_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #if DEVICE_RTC -#include "error.h" +#include "mbed_error.h" static int rtc_inited = 0;
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/pinmap.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/pinmap.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "pinmap.h" #include "PortNames.h" -#include "error.h" +#include "mbed_error.h" // Alternate-function mapping #define AF_NUM (10)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F103RB/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -33,7 +33,7 @@ #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/i2c_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/i2c_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -34,7 +34,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
/* Timeout values for flags and events waiting loops. These timeouts are
not based on accurate values, they just guarantee that the application will
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// Enable GPIO clock and return GPIO base address
uint32_t Set_GPIO_Clock(uint32_t port_idx) {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -33,7 +33,7 @@ #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F302R8/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -33,7 +33,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// TIM2 cannot be used because already used by the us_ticker
static const PinMap PinMap_PWM[] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/analogout_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/analogout_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define DAC_RANGE (0xFFF) // 12 bits
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// GPIO mode look-up table
static const uint32_t gpio_mode[12] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "port_api.h" #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PORTIN || DEVICE_PORTOUT
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -33,7 +33,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// TIM2 cannot be used because already used by the us_ticker
static const PinMap PinMap_PWM[] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/rtc_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F334R8/rtc_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #if DEVICE_RTC -#include "error.h" +#include "mbed_error.h" static int rtc_inited = 0;
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// GPIO mode look-up table
static const uint32_t gpio_mode[12] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "port_api.h" #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PORTIN || DEVICE_PORTOUT
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -33,7 +33,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// TIM5 cannot be used because already used by the us_ticker
static const PinMap PinMap_PWM[] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/rtc_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F401RE/rtc_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #if DEVICE_RTC -#include "error.h" +#include "mbed_error.h" static int rtc_inited = 0;
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// GPIO mode look-up table
static const uint32_t gpio_mode[12] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "port_api.h" #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PORTIN || DEVICE_PORTOUT
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -33,7 +33,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// TIM5 cannot be used because already used by the us_ticker
static const PinMap PinMap_PWM[] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/rtc_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_F411RE/rtc_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #if DEVICE_RTC -#include "error.h" +#include "mbed_error.h" static int rtc_inited = 0;
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/analogout_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/analogout_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define DAC_RANGE (0xFFF) // 12 bits
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/i2c_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/i2c_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -34,7 +34,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
/* Timeout values for flags and events waiting loops. These timeouts are
not based on accurate values, they just guarantee that the application will
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// GPIO mode look-up table
static const uint32_t gpio_mode[12] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "port_api.h" #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PORTIN || DEVICE_PORTOUT
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/pwmout_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/pwmout_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -33,7 +33,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
// TIM21 cannot be used because already used by the us_ticker
static const PinMap PinMap_PWM[] = {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/rtc_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L053R8/rtc_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #if DEVICE_RTC -#include "error.h" +#include "mbed_error.h" static int rtc_inited = 0;
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -31,7 +31,7 @@ #include "cmsis.h" #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// Enable GPIO clock and return GPIO base address
uint32_t Set_GPIO_Clock(uint32_t port_idx) {
--- a/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_NUCLEO_L152RE/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -33,7 +33,7 @@ #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/gpio_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_STM32F3XX/gpio_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "mbed_assert.h" #include "gpio_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" extern uint32_t Set_GPIO_Clock(uint32_t port_idx);
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/gpio_irq_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_STM32F3XX/gpio_irq_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -32,7 +32,7 @@ #include "gpio_irq_api.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define EDGE_NONE (0) #define EDGE_RISE (1)
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/pinmap.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_STM32F3XX/pinmap.c Tue Jul 08 11:15:08 2014 +0100
@@ -30,7 +30,7 @@
#include "mbed_assert.h"
#include "pinmap.h"
#include "PortNames.h"
-#include "error.h"
+#include "mbed_error.h"
// Enable GPIO clock and return GPIO base address
uint32_t Set_GPIO_Clock(uint32_t port_idx) {
--- a/targets/hal/TARGET_STM/TARGET_STM32F3XX/port_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_STM32F3XX/port_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -30,7 +30,7 @@ #include "port_api.h" #include "pinmap.h" #include "gpio_api.h" -#include "error.h" +#include "mbed_error.h" #if DEVICE_PORTIN || DEVICE_PORTOUT
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/analogin_api.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4XX/analogin_api.c Tue Jul 08 11:15:08 2014 +0100 @@ -20,7 +20,7 @@ #include "cmsis.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" #define ADC_10BIT_RANGE 0x3FF #define ADC_12BIT_RANGE 0xFFF
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/i2c_api.c Wed Jul 02 13:45:08 2014 +0100
+++ b/targets/hal/TARGET_STM/TARGET_STM32F4XX/i2c_api.c Tue Jul 08 11:15:08 2014 +0100
@@ -20,7 +20,7 @@
#include "cmsis.h"
#include "pinmap.h"
-#include "error.h"
+#include "mbed_error.h"
static const PinMap PinMap_I2C_SDA[] = {
{PB_7, I2C_1, STM_PIN_DATA(2, 4)},
--- a/targets/hal/TARGET_STM/TARGET_STM32F4XX/pinmap.c Wed Jul 02 13:45:08 2014 +0100 +++ b/targets/hal/TARGET_STM/TARGET_STM32F4XX/pinmap.c Tue Jul 08 11:15:08 2014 +0100 @@ -15,7 +15,7 @@ */ #include "mbed_assert.h" #include "pinmap.h" -#include "error.h" +#include "mbed_error.h" /** * Set the pin into input, output, alternate function or analog mode