mbed w/ spi bug fig
Fork of mbed-src by
Revision 243:1b2bee05fe98, committed 2014-06-27
- Comitter:
- mbed_official
- Date:
- Fri Jun 27 16:30:08 2014 +0100
- Parent:
- 242:7074e42da0b2
- Child:
- 244:7618f037e2de
- Commit message:
- Synchronized with git revision f74be83b0461a86c139b029e42d632c278656b83
Full URL: https://github.com/mbedmicro/mbed/commit/f74be83b0461a86c139b029e42d632c278656b83/
LPCCAPPUCCINO] initial port
Changed in this revision
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC11UXX/TOOLCHAIN_GCC_ARM/TARGET_LPCCAPPUCCINO/LPC11U37.ld Fri Jun 27 16:30:08 2014 +0100 @@ -0,0 +1,151 @@ +/* Linker script to configure memory regions. */ +MEMORY +{ + FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 128K + RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40 + USB_RAM (rwx): ORIGIN = 0x20004000, LENGTH = 0x800 +} + +/* Linker script to place sections and symbol values. Should be used together + * with other linker script that defines memory regions FLASH and RAM. + * It references following symbols, which must be defined in code: + * Reset_Handler : Entry of reset handler + * + * It defines following symbols, which code can use without definition: + * __exidx_start + * __exidx_end + * __etext + * __data_start__ + * __preinit_array_start + * __preinit_array_end + * __init_array_start + * __init_array_end + * __fini_array_start + * __fini_array_end + * __data_end__ + * __bss_start__ + * __bss_end__ + * __end__ + * end + * __HeapLimit + * __StackLimit + * __StackTop + * __stack + */ +ENTRY(Reset_Handler) + +SECTIONS +{ + .text : + { + KEEP(*(.isr_vector)) + *(.text.Reset_Handler) + + /* Only vectors and code running at reset are safe to be in first 512 + bytes since RAM can be mapped into this area for RAM based interrupt + vectors. */ + . = 0x00000200; + *(.text*) + + KEEP(*(.init)) + KEEP(*(.fini)) + + /* .ctors */ + *crtbegin.o(.ctors) + *crtbegin?.o(.ctors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors) + *(SORT(.ctors.*)) + *(.ctors) + + /* .dtors */ + *crtbegin.o(.dtors) + *crtbegin?.o(.dtors) + *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors) + *(SORT(.dtors.*)) + *(.dtors) + + *(.rodata*) + + KEEP(*(.eh_frame*)) + } > FLASH + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > FLASH + + __exidx_start = .; + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > FLASH + __exidx_end = .; + + __etext = .; + + .data : AT (__etext) + { + __data_start__ = .; + *(vtable) + *(.data*) + + . = ALIGN(4); + /* preinit data */ + PROVIDE (__preinit_array_start = .); + KEEP(*(.preinit_array)) + PROVIDE (__preinit_array_end = .); + + . = ALIGN(4); + /* init data */ + PROVIDE (__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE (__init_array_end = .); + + + . = ALIGN(4); + /* finit data */ + PROVIDE (__fini_array_start = .); + KEEP(*(SORT(.fini_array.*))) + KEEP(*(.fini_array)) + PROVIDE (__fini_array_end = .); + + . = ALIGN(4); + /* All data end */ + __data_end__ = .; + + } > RAM + + .bss : + { + __bss_start__ = .; + *(.bss*) + *(COMMON) + __bss_end__ = .; + } > RAM + + .heap : + { + __end__ = .; + end = __end__; + *(.heap*) + __HeapLimit = .; + } > RAM + + /* .stack_dummy section doesn't contains any symbols. It is only + * used for linker to calculate size of stack sections, and assign + * values to stack symbols later */ + .stack_dummy : + { + *(.stack) + } > RAM + + /* Set stack top to end of RAM, and stack limit move down by + * size of stack_dummy section */ + __StackTop = ORIGIN(RAM) + LENGTH(RAM); + __StackLimit = __StackTop - SIZEOF(.stack_dummy); + PROVIDE(__stack = __StackTop); + + /* Check if data + heap + stack exceeds RAM limit */ + ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack") +}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPCCAPPUCCINO/PeripheralNames.h Fri Jun 27 16:30:08 2014 +0100 @@ -0,0 +1,71 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PERIPHERALNAMES_H +#define MBED_PERIPHERALNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + UART_0 = (int)LPC_USART_BASE +} UARTName; + +typedef enum { + I2C_0 = (int)LPC_I2C_BASE +} I2CName; + +typedef enum { + ADC0_0 = 0, + ADC0_1, + ADC0_2, + ADC0_3, + ADC0_4, + ADC0_5, + ADC0_6, + ADC0_7 +} ADCName; + +typedef enum { + SPI_0 = (int)LPC_SSP0_BASE, + SPI_1 = (int)LPC_SSP1_BASE +} SPIName; + +typedef enum { + PWM_1 = 0, + PWM_2, + PWM_3, + PWM_4, + PWM_5, + PWM_6, + PWM_7, + PWM_8, + PWM_9, + PWM_10, + PWM_11 +} PWMName; + +#define STDIO_UART_TX UART_TX +#define STDIO_UART_RX UART_RX +#define STDIO_UART UART_0 + +#ifdef __cplusplus +} +#endif + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPCCAPPUCCINO/PinNames.h Fri Jun 27 16:30:08 2014 +0100 @@ -0,0 +1,134 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 5 + +typedef enum { + // LPC11U Pin Names + P0_0 = 0, + P0_1 = 1, + P0_2 = 2, + P0_3 = 3, + P0_4 = 4, + P0_5 = 5, + P0_6 = 6, + P0_7 = 7, + P0_8 = 8, + P0_9 = 9, + P0_10 = 10, + P0_11 = 11, + P0_12 = 12, + P0_13 = 13, + P0_14 = 14, + P0_15 = 15, + P0_16 = 16, + P0_17 = 17, + P0_18 = 18, + P0_19 = 19, + P0_20 = 20, + P0_21 = 21, + P0_22 = 22, + P0_23 = 23, + P0_24 = 24, + P0_25 = 25, + P0_26 = 26, + P0_27 = 27, + + P1_0 = 32, + P1_1 = 33, + P1_2 = 34, + P1_3 = 35, + P1_4 = 36, + P1_5 = 37, + P1_6 = 38, + P1_7 = 39, + P1_8 = 40, + P1_9 = 41, + P1_10 = 42, + P1_11 = 43, + P1_12 = 44, + P1_13 = 45, + P1_14 = 46, + P1_15 = 47, + P1_16 = 48, + P1_17 = 49, + P1_18 = 50, + P1_19 = 51, + P1_20 = 52, + P1_21 = 53, + P1_22 = 54, + P1_23 = 55, + P1_24 = 56, + P1_25 = 57, + P1_26 = 58, + P1_27 = 59, + P1_28 = 60, + P1_29 = 61, + + P1_31 = 63, + + + // Other mbed Pin Names + LED1 = P1_19, + LED2 = P1_19, // Negative On + LED3 = P1_19, + LED4 = P1_19, + + UART_TX = P0_19, + UART_RX = P0_18, + + // Not connected + NC = (int)0xFFFFFFFF, +} PinName; + +typedef enum { + CHANNEL0 = FLEX_INT0_IRQn, + CHANNEL1 = FLEX_INT1_IRQn, + CHANNEL2 = FLEX_INT2_IRQn, + CHANNEL3 = FLEX_INT3_IRQn, + CHANNEL4 = FLEX_INT4_IRQn, + CHANNEL5 = FLEX_INT5_IRQn, + CHANNEL6 = FLEX_INT6_IRQn, + CHANNEL7 = FLEX_INT7_IRQn +} Channel; + +typedef enum { + PullUp = 2, + PullDown = 1, + PullNone = 0, + Repeater = 3, + OpenDrain = 4, + PullDefault = PullDown +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPCCAPPUCCINO/device.h Fri Jun 27 16:30:08 2014 +0100 @@ -0,0 +1,59 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 32 +#define DEVICE_MAC_OFFSET 20 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/serial_api.c Fri Jun 27 07:30:09 2014 +0100 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/serial_api.c Fri Jun 27 16:30:08 2014 +0100 @@ -193,7 +193,7 @@ stop_bits -= 1; data_bits -= 5; - int parity_enable, parity_select; + int parity_enable = 0, parity_select = 0; switch (parity) { case ParityNone: parity_enable = 0; parity_select = 0; break; case ParityOdd : parity_enable = 1; parity_select = 0; break;