Diff: targets/hal/TARGET_NXP/TARGET_LPC11U6X/pwmout_api.c

Revision:

193:cff126de7aaf

Child:

234:37acebda271b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11U6X/pwmout_api.c	Fri May 16 09:00:06 2014 +0100
@@ -0,0 +1,190 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "pwmout_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "error.h"
+
+#if DEVICE_PWMOUT
+
+#define SCT_CHANNELS 2
+
+static const PinMap PinMap_PWM[] = {
+    {P1_19, SCT0_0, 2},
+    {P2_2 , SCT0_1, 3},
+    {P2_7 , SCT0_2, 2},
+    {P1_13, SCT0_3, 2},
+    {P2_16, SCT1_0, 1},
+    {P2_17, SCT1_1, 1},
+    {P2_18, SCT1_2, 1},
+    {P2_19, SCT1_3, 1},
+    {NC   , NC    ,0}
+};
+
+
+static LPC_SCT0_Type *SCTs[SCT_CHANNELS] = {
+    (LPC_SCT0_Type*)LPC_SCT0,
+    (LPC_SCT0_Type*)LPC_SCT1,
+
+};
+
+// bit flags for used SCTs
+static unsigned char sct_used = 0;
+
+static int get_available_sct(void) {
+    int i;
+    for (i=0; i<SCT_CHANNELS; i++) {
+        if ((sct_used & (1 << i)) == 0)
+            return i;
+    }
+    return -1;
+}
+
+void pwmout_init(pwmout_t* obj, PinName pin) {
+    // determine the SPI to use
+    PWMName pwm_mapped = (PWMName)pinmap_peripheral(pin, PinMap_PWM);
+    if (pwm_mapped == (uint32_t)NC) {
+        error("PwmOut pin mapping failed");
+    }
+    int sct_n = get_available_sct();
+    if (sct_n == -1) {
+        error("No available SCT");
+    }
+
+    sct_used |= (1 << sct_n);
+    obj->pwm =  SCTs[sct_n];
+    obj->pwm_ch = sct_n;
+
+    // Enable the SCT clock
+    LPC_SYSCON->SYSAHBCLKCTRL |= (1UL << 31);
+
+    // Clear peripheral reset the SCT:
+    LPC_SYSCON->PRESETCTRL |=  (1 << (obj->pwm_ch + 9));
+    pinmap_pinout(pin, PinMap_PWM);
+    LPC_SCT0_Type* pwm = obj->pwm;
+    
+    // Two 16-bit counters, autolimit
+    pwm->CONFIG &= ~(0x1);
+    pwm->CONFIG |= (1 << 17);
+    
+    // halt and clear the counter
+    pwm->CTRL |= (1 << 2) | (1 << 3);
+    
+    // System Clock -> us_ticker (1)MHz
+    pwm->CTRL &= ~(0x7F << 5);
+    pwm->CTRL |= (((SystemCoreClock/1000000 - 1) & 0x7F) << 5);
+    
+    switch(pwm_mapped) {
+        case SCT0_0:
+        case SCT1_0:
+            pwm->OUT0_SET = (1 << 0); // event 0
+            pwm->OUT0_CLR = (1 << 1); // event 1
+            break;
+        case SCT0_1:
+        case SCT1_1:
+            pwm->OUT1_SET = (1 << 0); // event 0
+            pwm->OUT1_CLR = (1 << 1); // event 1
+            break;
+        case SCT0_2:
+        case SCT1_2:
+            pwm->OUT2_SET = (1 << 0); // event 0
+            pwm->OUT2_CLR = (1 << 1); // event 1
+            break;
+        case SCT0_3:
+        case SCT1_3:
+            pwm->OUT3_SET = (1 << 0); // event 0
+            pwm->OUT3_CLR = (1 << 1); // event 1
+            break;
+        default:
+            break;
+    }
+    // Event 0 : MATCH and MATCHSEL=0
+    pwm->EV0_CTRL  = (1 << 12);
+    pwm->EV0_STATE = 0xFFFFFFFF;
+    // Event 1 : MATCH and MATCHSEL=1
+    pwm->EV1_CTRL  = (1 << 12) | (1 << 0);
+    pwm->EV1_STATE = 0xFFFFFFFF;
+    
+    // Match reload register
+    pwm->MATCHREL0 = 20000; // 20ms
+    pwm->MATCHREL1 = (pwm->MATCHREL0 / 4); // 50% duty
+    
+    // unhalt the counter:
+    //    - clearing bit 2 of the CTRL register
+    pwm->CTRL &= ~(1 << 2);
+
+    // default to 20ms: standard for servos, and fine for e.g. brightness control
+    pwmout_period_ms(obj, 20);
+    pwmout_write    (obj, 0);
+}
+
+void pwmout_free(pwmout_t* obj) {
+    sct_used &= ~(1 << obj->pwm_ch);
+    if (sct_used == 0) {
+        // Disable the SCT clock
+        LPC_SYSCON->SYSAHBCLKCTRL &= ~(1UL << 31);
+    }
+}
+
+void pwmout_write(pwmout_t* obj, float value) {
+    if (value < 0.0f) {
+        value = 0.0;
+    } else if (value > 1.0f) {
+        value = 1.0;
+    }
+    uint32_t t_off = obj->pwm->MATCHREL0 - (uint32_t)((float)(obj->pwm->MATCHREL0) * value);
+    uint32_t t_on = (uint32_t)((float)(obj->pwm->MATCHREL0) * value);
+    obj->pwm->MATCHREL1 = t_on;
+}
+
+float pwmout_read(pwmout_t* obj) {
+    uint32_t t_off = obj->pwm->MATCHREL0;
+    uint32_t t_on  = obj->pwm->MATCHREL1;
+    float v = (float)t_on/(float)t_off;
+    return (v > 1.0f) ? (1.0f) : (v);
+}
+
+void pwmout_period(pwmout_t* obj, float seconds) {
+    pwmout_period_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_period_ms(pwmout_t* obj, int ms) {
+    pwmout_period_us(obj, ms * 1000);
+}
+
+// Set the PWM period, keeping the duty cycle the same.
+void pwmout_period_us(pwmout_t* obj, int us) {
+    uint32_t t_off = obj->pwm->MATCHREL0;
+    uint32_t t_on  = obj->pwm->MATCHREL1;
+    float v = (float)t_on/(float)t_off;
+    obj->pwm->MATCHREL0 = (uint64_t)us;
+    obj->pwm->MATCHREL1 = (uint64_t)((float)us * (float)v);
+}
+
+void pwmout_pulsewidth(pwmout_t* obj, float seconds) {
+    pwmout_pulsewidth_us(obj, seconds * 1000000.0f);
+}
+
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms) {
+    pwmout_pulsewidth_us(obj, ms * 1000);
+}
+
+void pwmout_pulsewidth_us(pwmout_t* obj, int us) {
+    obj->pwm->MATCHREL1 = (uint64_t)us;
+}
+
+#endif