meh
Fork of mbed by
Diff: TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/MK64F12/MK64F12_usb.h
- Revision:
- 89:552587b429a1
- Parent:
- 82:6473597d706e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/MK64F12/MK64F12_usb.h Fri Sep 12 16:41:52 2014 +0100 @@ -0,0 +1,4276 @@ +/* + * Copyright (c) 2014, Freescale Semiconductor, Inc. + * All rights reserved. + * + * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT + * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT + * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY + * OF SUCH DAMAGE. + */ +/* + * WARNING! DO NOT EDIT THIS FILE DIRECTLY! + * + * This file was generated automatically and any changes may be lost. + */ +#ifndef __HW_USB_REGISTERS_H__ +#define __HW_USB_REGISTERS_H__ + +#include "regs.h" + +/* + * MK64F12 USB + * + * Universal Serial Bus, OTG Capable Controller + * + * Registers defined in this header file: + * - HW_USB_PERID - Peripheral ID register + * - HW_USB_IDCOMP - Peripheral ID Complement register + * - HW_USB_REV - Peripheral Revision register + * - HW_USB_ADDINFO - Peripheral Additional Info register + * - HW_USB_OTGISTAT - OTG Interrupt Status register + * - HW_USB_OTGICR - OTG Interrupt Control register + * - HW_USB_OTGSTAT - OTG Status register + * - HW_USB_OTGCTL - OTG Control register + * - HW_USB_ISTAT - Interrupt Status register + * - HW_USB_INTEN - Interrupt Enable register + * - HW_USB_ERRSTAT - Error Interrupt Status register + * - HW_USB_ERREN - Error Interrupt Enable register + * - HW_USB_STAT - Status register + * - HW_USB_CTL - Control register + * - HW_USB_ADDR - Address register + * - HW_USB_BDTPAGE1 - BDT Page register 1 + * - HW_USB_FRMNUML - Frame Number register Low + * - HW_USB_FRMNUMH - Frame Number register High + * - HW_USB_TOKEN - Token register + * - HW_USB_SOFTHLD - SOF Threshold register + * - HW_USB_BDTPAGE2 - BDT Page Register 2 + * - HW_USB_BDTPAGE3 - BDT Page Register 3 + * - HW_USB_ENDPTn - Endpoint Control register + * - HW_USB_USBCTRL - USB Control register + * - HW_USB_OBSERVE - USB OTG Observe register + * - HW_USB_CONTROL - USB OTG Control register + * - HW_USB_USBTRC0 - USB Transceiver Control register 0 + * - HW_USB_USBFRMADJUST - Frame Adjust Register + * - HW_USB_CLK_RECOVER_CTRL - USB Clock recovery control + * - HW_USB_CLK_RECOVER_IRC_EN - IRC48M oscillator enable register + * - HW_USB_CLK_RECOVER_INT_STATUS - Clock recovery separated interrupt status + * + * - hw_usb_t - Struct containing all module registers. + */ + +//! @name Module base addresses +//@{ +#ifndef REGS_USB_BASE +#define HW_USB_INSTANCE_COUNT (1U) //!< Number of instances of the USB module. +#define REGS_USB_BASE (0x40072000U) //!< Base address for USB0. +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_PERID - Peripheral ID register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_PERID - Peripheral ID register (RO) + * + * Reset value: 0x04U + * + * Reads back the value of 0x04. This value is defined for the USB peripheral. + */ +typedef union _hw_usb_perid +{ + uint8_t U; + struct _hw_usb_perid_bitfields + { + uint8_t ID : 6; //!< [5:0] Peripheral Identification + uint8_t RESERVED0 : 2; //!< [7:6] + } B; +} hw_usb_perid_t; +#endif + +/*! + * @name Constants and macros for entire USB_PERID register + */ +//@{ +#define HW_USB_PERID_ADDR (REGS_USB_BASE + 0x0U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_PERID (*(__I hw_usb_perid_t *) HW_USB_PERID_ADDR) +#define HW_USB_PERID_RD() (HW_USB_PERID.U) +#endif +//@} + +/* + * Constants & macros for individual USB_PERID bitfields + */ + +/*! + * @name Register USB_PERID, field ID[5:0] (RO) + * + * This field always reads 0x4h. + */ +//@{ +#define BP_USB_PERID_ID (0U) //!< Bit position for USB_PERID_ID. +#define BM_USB_PERID_ID (0x3FU) //!< Bit mask for USB_PERID_ID. +#define BS_USB_PERID_ID (6U) //!< Bit field size in bits for USB_PERID_ID. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_PERID_ID field. +#define BR_USB_PERID_ID (HW_USB_PERID.B.ID) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_IDCOMP - Peripheral ID Complement register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_IDCOMP - Peripheral ID Complement register (RO) + * + * Reset value: 0xFBU + * + * Reads back the complement of the Peripheral ID register. For the USB + * peripheral, the value is 0xFB. + */ +typedef union _hw_usb_idcomp +{ + uint8_t U; + struct _hw_usb_idcomp_bitfields + { + uint8_t NID : 6; //!< [5:0] + uint8_t RESERVED0 : 2; //!< [7:6] + } B; +} hw_usb_idcomp_t; +#endif + +/*! + * @name Constants and macros for entire USB_IDCOMP register + */ +//@{ +#define HW_USB_IDCOMP_ADDR (REGS_USB_BASE + 0x4U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_IDCOMP (*(__I hw_usb_idcomp_t *) HW_USB_IDCOMP_ADDR) +#define HW_USB_IDCOMP_RD() (HW_USB_IDCOMP.U) +#endif +//@} + +/* + * Constants & macros for individual USB_IDCOMP bitfields + */ + +/*! + * @name Register USB_IDCOMP, field NID[5:0] (RO) + * + * Ones' complement of PERID[ID]. bits. + */ +//@{ +#define BP_USB_IDCOMP_NID (0U) //!< Bit position for USB_IDCOMP_NID. +#define BM_USB_IDCOMP_NID (0x3FU) //!< Bit mask for USB_IDCOMP_NID. +#define BS_USB_IDCOMP_NID (6U) //!< Bit field size in bits for USB_IDCOMP_NID. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_IDCOMP_NID field. +#define BR_USB_IDCOMP_NID (HW_USB_IDCOMP.B.NID) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_REV - Peripheral Revision register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_REV - Peripheral Revision register (RO) + * + * Reset value: 0x33U + * + * Contains the revision number of the USB module. + */ +typedef union _hw_usb_rev +{ + uint8_t U; + struct _hw_usb_rev_bitfields + { + uint8_t REV : 8; //!< [7:0] Revision + } B; +} hw_usb_rev_t; +#endif + +/*! + * @name Constants and macros for entire USB_REV register + */ +//@{ +#define HW_USB_REV_ADDR (REGS_USB_BASE + 0x8U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_REV (*(__I hw_usb_rev_t *) HW_USB_REV_ADDR) +#define HW_USB_REV_RD() (HW_USB_REV.U) +#endif +//@} + +/* + * Constants & macros for individual USB_REV bitfields + */ + +/*! + * @name Register USB_REV, field REV[7:0] (RO) + * + * Indicates the revision number of the USB Core. + */ +//@{ +#define BP_USB_REV_REV (0U) //!< Bit position for USB_REV_REV. +#define BM_USB_REV_REV (0xFFU) //!< Bit mask for USB_REV_REV. +#define BS_USB_REV_REV (8U) //!< Bit field size in bits for USB_REV_REV. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_REV_REV field. +#define BR_USB_REV_REV (HW_USB_REV.U) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_ADDINFO - Peripheral Additional Info register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_ADDINFO - Peripheral Additional Info register (RO) + * + * Reset value: 0x01U + * + * Reads back the value of the fixed Interrupt Request Level (IRQNUM) along with + * the Host Enable bit. + */ +typedef union _hw_usb_addinfo +{ + uint8_t U; + struct _hw_usb_addinfo_bitfields + { + uint8_t IEHOST : 1; //!< [0] + uint8_t RESERVED0 : 2; //!< [2:1] + uint8_t IRQNUM : 5; //!< [7:3] Assigned Interrupt Request Number + } B; +} hw_usb_addinfo_t; +#endif + +/*! + * @name Constants and macros for entire USB_ADDINFO register + */ +//@{ +#define HW_USB_ADDINFO_ADDR (REGS_USB_BASE + 0xCU) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_ADDINFO (*(__I hw_usb_addinfo_t *) HW_USB_ADDINFO_ADDR) +#define HW_USB_ADDINFO_RD() (HW_USB_ADDINFO.U) +#endif +//@} + +/* + * Constants & macros for individual USB_ADDINFO bitfields + */ + +/*! + * @name Register USB_ADDINFO, field IEHOST[0] (RO) + * + * This bit is set if host mode is enabled. + */ +//@{ +#define BP_USB_ADDINFO_IEHOST (0U) //!< Bit position for USB_ADDINFO_IEHOST. +#define BM_USB_ADDINFO_IEHOST (0x01U) //!< Bit mask for USB_ADDINFO_IEHOST. +#define BS_USB_ADDINFO_IEHOST (1U) //!< Bit field size in bits for USB_ADDINFO_IEHOST. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ADDINFO_IEHOST field. +#define BR_USB_ADDINFO_IEHOST (BITBAND_ACCESS8(HW_USB_ADDINFO_ADDR, BP_USB_ADDINFO_IEHOST)) +#endif +//@} + +/*! + * @name Register USB_ADDINFO, field IRQNUM[7:3] (RO) + */ +//@{ +#define BP_USB_ADDINFO_IRQNUM (3U) //!< Bit position for USB_ADDINFO_IRQNUM. +#define BM_USB_ADDINFO_IRQNUM (0xF8U) //!< Bit mask for USB_ADDINFO_IRQNUM. +#define BS_USB_ADDINFO_IRQNUM (5U) //!< Bit field size in bits for USB_ADDINFO_IRQNUM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ADDINFO_IRQNUM field. +#define BR_USB_ADDINFO_IRQNUM (HW_USB_ADDINFO.B.IRQNUM) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_OTGISTAT - OTG Interrupt Status register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_OTGISTAT - OTG Interrupt Status register (RW) + * + * Reset value: 0x00U + * + * Records changes of the ID sense and VBUS signals. Software can read this + * register to determine the event that triggers an interrupt. Only bits that have + * changed since the last software read are set. Writing a one to a bit clears the + * associated interrupt. + */ +typedef union _hw_usb_otgistat +{ + uint8_t U; + struct _hw_usb_otgistat_bitfields + { + uint8_t AVBUSCHG : 1; //!< [0] + uint8_t RESERVED0 : 1; //!< [1] + uint8_t B_SESS_CHG : 1; //!< [2] + uint8_t SESSVLDCHG : 1; //!< [3] + uint8_t RESERVED1 : 1; //!< [4] + uint8_t LINE_STATE_CHG : 1; //!< [5] + uint8_t ONEMSEC : 1; //!< [6] + uint8_t IDCHG : 1; //!< [7] + } B; +} hw_usb_otgistat_t; +#endif + +/*! + * @name Constants and macros for entire USB_OTGISTAT register + */ +//@{ +#define HW_USB_OTGISTAT_ADDR (REGS_USB_BASE + 0x10U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_OTGISTAT (*(__IO hw_usb_otgistat_t *) HW_USB_OTGISTAT_ADDR) +#define HW_USB_OTGISTAT_RD() (HW_USB_OTGISTAT.U) +#define HW_USB_OTGISTAT_WR(v) (HW_USB_OTGISTAT.U = (v)) +#define HW_USB_OTGISTAT_SET(v) (HW_USB_OTGISTAT_WR(HW_USB_OTGISTAT_RD() | (v))) +#define HW_USB_OTGISTAT_CLR(v) (HW_USB_OTGISTAT_WR(HW_USB_OTGISTAT_RD() & ~(v))) +#define HW_USB_OTGISTAT_TOG(v) (HW_USB_OTGISTAT_WR(HW_USB_OTGISTAT_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_OTGISTAT bitfields + */ + +/*! + * @name Register USB_OTGISTAT, field AVBUSCHG[0] (RW) + * + * This bit is set when a change in VBUS is detected on an A device. + */ +//@{ +#define BP_USB_OTGISTAT_AVBUSCHG (0U) //!< Bit position for USB_OTGISTAT_AVBUSCHG. +#define BM_USB_OTGISTAT_AVBUSCHG (0x01U) //!< Bit mask for USB_OTGISTAT_AVBUSCHG. +#define BS_USB_OTGISTAT_AVBUSCHG (1U) //!< Bit field size in bits for USB_OTGISTAT_AVBUSCHG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGISTAT_AVBUSCHG field. +#define BR_USB_OTGISTAT_AVBUSCHG (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_AVBUSCHG)) +#endif + +//! @brief Format value for bitfield USB_OTGISTAT_AVBUSCHG. +#define BF_USB_OTGISTAT_AVBUSCHG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGISTAT_AVBUSCHG), uint8_t) & BM_USB_OTGISTAT_AVBUSCHG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the AVBUSCHG field to a new value. +#define BW_USB_OTGISTAT_AVBUSCHG(v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_AVBUSCHG) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGISTAT, field B_SESS_CHG[2] (RW) + * + * This bit is set when a change in VBUS is detected on a B device. + */ +//@{ +#define BP_USB_OTGISTAT_B_SESS_CHG (2U) //!< Bit position for USB_OTGISTAT_B_SESS_CHG. +#define BM_USB_OTGISTAT_B_SESS_CHG (0x04U) //!< Bit mask for USB_OTGISTAT_B_SESS_CHG. +#define BS_USB_OTGISTAT_B_SESS_CHG (1U) //!< Bit field size in bits for USB_OTGISTAT_B_SESS_CHG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGISTAT_B_SESS_CHG field. +#define BR_USB_OTGISTAT_B_SESS_CHG (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_B_SESS_CHG)) +#endif + +//! @brief Format value for bitfield USB_OTGISTAT_B_SESS_CHG. +#define BF_USB_OTGISTAT_B_SESS_CHG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGISTAT_B_SESS_CHG), uint8_t) & BM_USB_OTGISTAT_B_SESS_CHG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the B_SESS_CHG field to a new value. +#define BW_USB_OTGISTAT_B_SESS_CHG(v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_B_SESS_CHG) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGISTAT, field SESSVLDCHG[3] (RW) + * + * This bit is set when a change in VBUS is detected indicating a session valid + * or a session no longer valid. + */ +//@{ +#define BP_USB_OTGISTAT_SESSVLDCHG (3U) //!< Bit position for USB_OTGISTAT_SESSVLDCHG. +#define BM_USB_OTGISTAT_SESSVLDCHG (0x08U) //!< Bit mask for USB_OTGISTAT_SESSVLDCHG. +#define BS_USB_OTGISTAT_SESSVLDCHG (1U) //!< Bit field size in bits for USB_OTGISTAT_SESSVLDCHG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGISTAT_SESSVLDCHG field. +#define BR_USB_OTGISTAT_SESSVLDCHG (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_SESSVLDCHG)) +#endif + +//! @brief Format value for bitfield USB_OTGISTAT_SESSVLDCHG. +#define BF_USB_OTGISTAT_SESSVLDCHG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGISTAT_SESSVLDCHG), uint8_t) & BM_USB_OTGISTAT_SESSVLDCHG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SESSVLDCHG field to a new value. +#define BW_USB_OTGISTAT_SESSVLDCHG(v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_SESSVLDCHG) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGISTAT, field LINE_STATE_CHG[5] (RW) + * + * This interrupt is set when the USB line state (CTL[SE0] and CTL[JSTATE] bits) + * are stable without change for 1 millisecond, and the value of the line state + * is different from the last time when the line state was stable. It is set on + * transitions between SE0 and J-state, SE0 and K-state, and J-state and K-state. + * Changes in J-state while SE0 is true do not cause an interrupt. This interrupt + * can be used in detecting Reset, Resume, Connect, and Data Line Pulse + * signaling. + */ +//@{ +#define BP_USB_OTGISTAT_LINE_STATE_CHG (5U) //!< Bit position for USB_OTGISTAT_LINE_STATE_CHG. +#define BM_USB_OTGISTAT_LINE_STATE_CHG (0x20U) //!< Bit mask for USB_OTGISTAT_LINE_STATE_CHG. +#define BS_USB_OTGISTAT_LINE_STATE_CHG (1U) //!< Bit field size in bits for USB_OTGISTAT_LINE_STATE_CHG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGISTAT_LINE_STATE_CHG field. +#define BR_USB_OTGISTAT_LINE_STATE_CHG (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_LINE_STATE_CHG)) +#endif + +//! @brief Format value for bitfield USB_OTGISTAT_LINE_STATE_CHG. +#define BF_USB_OTGISTAT_LINE_STATE_CHG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGISTAT_LINE_STATE_CHG), uint8_t) & BM_USB_OTGISTAT_LINE_STATE_CHG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the LINE_STATE_CHG field to a new value. +#define BW_USB_OTGISTAT_LINE_STATE_CHG(v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_LINE_STATE_CHG) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGISTAT, field ONEMSEC[6] (RW) + * + * This bit is set when the 1 millisecond timer expires. This bit stays asserted + * until cleared by software. The interrupt must be serviced every millisecond + * to avoid losing 1msec counts. + */ +//@{ +#define BP_USB_OTGISTAT_ONEMSEC (6U) //!< Bit position for USB_OTGISTAT_ONEMSEC. +#define BM_USB_OTGISTAT_ONEMSEC (0x40U) //!< Bit mask for USB_OTGISTAT_ONEMSEC. +#define BS_USB_OTGISTAT_ONEMSEC (1U) //!< Bit field size in bits for USB_OTGISTAT_ONEMSEC. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGISTAT_ONEMSEC field. +#define BR_USB_OTGISTAT_ONEMSEC (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_ONEMSEC)) +#endif + +//! @brief Format value for bitfield USB_OTGISTAT_ONEMSEC. +#define BF_USB_OTGISTAT_ONEMSEC(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGISTAT_ONEMSEC), uint8_t) & BM_USB_OTGISTAT_ONEMSEC) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ONEMSEC field to a new value. +#define BW_USB_OTGISTAT_ONEMSEC(v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_ONEMSEC) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGISTAT, field IDCHG[7] (RW) + * + * This bit is set when a change in the ID Signal from the USB connector is + * sensed. + */ +//@{ +#define BP_USB_OTGISTAT_IDCHG (7U) //!< Bit position for USB_OTGISTAT_IDCHG. +#define BM_USB_OTGISTAT_IDCHG (0x80U) //!< Bit mask for USB_OTGISTAT_IDCHG. +#define BS_USB_OTGISTAT_IDCHG (1U) //!< Bit field size in bits for USB_OTGISTAT_IDCHG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGISTAT_IDCHG field. +#define BR_USB_OTGISTAT_IDCHG (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_IDCHG)) +#endif + +//! @brief Format value for bitfield USB_OTGISTAT_IDCHG. +#define BF_USB_OTGISTAT_IDCHG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGISTAT_IDCHG), uint8_t) & BM_USB_OTGISTAT_IDCHG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the IDCHG field to a new value. +#define BW_USB_OTGISTAT_IDCHG(v) (BITBAND_ACCESS8(HW_USB_OTGISTAT_ADDR, BP_USB_OTGISTAT_IDCHG) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_OTGICR - OTG Interrupt Control register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_OTGICR - OTG Interrupt Control register (RW) + * + * Reset value: 0x00U + * + * Enables the corresponding interrupt status bits defined in the OTG Interrupt + * Status Register. + */ +typedef union _hw_usb_otgicr +{ + uint8_t U; + struct _hw_usb_otgicr_bitfields + { + uint8_t AVBUSEN : 1; //!< [0] A VBUS Valid Interrupt Enable + uint8_t RESERVED0 : 1; //!< [1] + uint8_t BSESSEN : 1; //!< [2] B Session END Interrupt Enable + uint8_t SESSVLDEN : 1; //!< [3] Session Valid Interrupt Enable + uint8_t RESERVED1 : 1; //!< [4] + uint8_t LINESTATEEN : 1; //!< [5] Line State Change Interrupt Enable + uint8_t ONEMSECEN : 1; //!< [6] One Millisecond Interrupt Enable + uint8_t IDEN : 1; //!< [7] ID Interrupt Enable + } B; +} hw_usb_otgicr_t; +#endif + +/*! + * @name Constants and macros for entire USB_OTGICR register + */ +//@{ +#define HW_USB_OTGICR_ADDR (REGS_USB_BASE + 0x14U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_OTGICR (*(__IO hw_usb_otgicr_t *) HW_USB_OTGICR_ADDR) +#define HW_USB_OTGICR_RD() (HW_USB_OTGICR.U) +#define HW_USB_OTGICR_WR(v) (HW_USB_OTGICR.U = (v)) +#define HW_USB_OTGICR_SET(v) (HW_USB_OTGICR_WR(HW_USB_OTGICR_RD() | (v))) +#define HW_USB_OTGICR_CLR(v) (HW_USB_OTGICR_WR(HW_USB_OTGICR_RD() & ~(v))) +#define HW_USB_OTGICR_TOG(v) (HW_USB_OTGICR_WR(HW_USB_OTGICR_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_OTGICR bitfields + */ + +/*! + * @name Register USB_OTGICR, field AVBUSEN[0] (RW) + * + * Values: + * - 0 - Disables the AVBUSCHG interrupt. + * - 1 - Enables the AVBUSCHG interrupt. + */ +//@{ +#define BP_USB_OTGICR_AVBUSEN (0U) //!< Bit position for USB_OTGICR_AVBUSEN. +#define BM_USB_OTGICR_AVBUSEN (0x01U) //!< Bit mask for USB_OTGICR_AVBUSEN. +#define BS_USB_OTGICR_AVBUSEN (1U) //!< Bit field size in bits for USB_OTGICR_AVBUSEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGICR_AVBUSEN field. +#define BR_USB_OTGICR_AVBUSEN (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_AVBUSEN)) +#endif + +//! @brief Format value for bitfield USB_OTGICR_AVBUSEN. +#define BF_USB_OTGICR_AVBUSEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGICR_AVBUSEN), uint8_t) & BM_USB_OTGICR_AVBUSEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the AVBUSEN field to a new value. +#define BW_USB_OTGICR_AVBUSEN(v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_AVBUSEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGICR, field BSESSEN[2] (RW) + * + * Values: + * - 0 - Disables the B_SESS_CHG interrupt. + * - 1 - Enables the B_SESS_CHG interrupt. + */ +//@{ +#define BP_USB_OTGICR_BSESSEN (2U) //!< Bit position for USB_OTGICR_BSESSEN. +#define BM_USB_OTGICR_BSESSEN (0x04U) //!< Bit mask for USB_OTGICR_BSESSEN. +#define BS_USB_OTGICR_BSESSEN (1U) //!< Bit field size in bits for USB_OTGICR_BSESSEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGICR_BSESSEN field. +#define BR_USB_OTGICR_BSESSEN (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_BSESSEN)) +#endif + +//! @brief Format value for bitfield USB_OTGICR_BSESSEN. +#define BF_USB_OTGICR_BSESSEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGICR_BSESSEN), uint8_t) & BM_USB_OTGICR_BSESSEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BSESSEN field to a new value. +#define BW_USB_OTGICR_BSESSEN(v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_BSESSEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGICR, field SESSVLDEN[3] (RW) + * + * Values: + * - 0 - Disables the SESSVLDCHG interrupt. + * - 1 - Enables the SESSVLDCHG interrupt. + */ +//@{ +#define BP_USB_OTGICR_SESSVLDEN (3U) //!< Bit position for USB_OTGICR_SESSVLDEN. +#define BM_USB_OTGICR_SESSVLDEN (0x08U) //!< Bit mask for USB_OTGICR_SESSVLDEN. +#define BS_USB_OTGICR_SESSVLDEN (1U) //!< Bit field size in bits for USB_OTGICR_SESSVLDEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGICR_SESSVLDEN field. +#define BR_USB_OTGICR_SESSVLDEN (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_SESSVLDEN)) +#endif + +//! @brief Format value for bitfield USB_OTGICR_SESSVLDEN. +#define BF_USB_OTGICR_SESSVLDEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGICR_SESSVLDEN), uint8_t) & BM_USB_OTGICR_SESSVLDEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SESSVLDEN field to a new value. +#define BW_USB_OTGICR_SESSVLDEN(v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_SESSVLDEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGICR, field LINESTATEEN[5] (RW) + * + * Values: + * - 0 - Disables the LINE_STAT_CHG interrupt. + * - 1 - Enables the LINE_STAT_CHG interrupt. + */ +//@{ +#define BP_USB_OTGICR_LINESTATEEN (5U) //!< Bit position for USB_OTGICR_LINESTATEEN. +#define BM_USB_OTGICR_LINESTATEEN (0x20U) //!< Bit mask for USB_OTGICR_LINESTATEEN. +#define BS_USB_OTGICR_LINESTATEEN (1U) //!< Bit field size in bits for USB_OTGICR_LINESTATEEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGICR_LINESTATEEN field. +#define BR_USB_OTGICR_LINESTATEEN (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_LINESTATEEN)) +#endif + +//! @brief Format value for bitfield USB_OTGICR_LINESTATEEN. +#define BF_USB_OTGICR_LINESTATEEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGICR_LINESTATEEN), uint8_t) & BM_USB_OTGICR_LINESTATEEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the LINESTATEEN field to a new value. +#define BW_USB_OTGICR_LINESTATEEN(v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_LINESTATEEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGICR, field ONEMSECEN[6] (RW) + * + * Values: + * - 0 - Diables the 1ms timer interrupt. + * - 1 - Enables the 1ms timer interrupt. + */ +//@{ +#define BP_USB_OTGICR_ONEMSECEN (6U) //!< Bit position for USB_OTGICR_ONEMSECEN. +#define BM_USB_OTGICR_ONEMSECEN (0x40U) //!< Bit mask for USB_OTGICR_ONEMSECEN. +#define BS_USB_OTGICR_ONEMSECEN (1U) //!< Bit field size in bits for USB_OTGICR_ONEMSECEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGICR_ONEMSECEN field. +#define BR_USB_OTGICR_ONEMSECEN (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_ONEMSECEN)) +#endif + +//! @brief Format value for bitfield USB_OTGICR_ONEMSECEN. +#define BF_USB_OTGICR_ONEMSECEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGICR_ONEMSECEN), uint8_t) & BM_USB_OTGICR_ONEMSECEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ONEMSECEN field to a new value. +#define BW_USB_OTGICR_ONEMSECEN(v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_ONEMSECEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGICR, field IDEN[7] (RW) + * + * Values: + * - 0 - The ID interrupt is disabled + * - 1 - The ID interrupt is enabled + */ +//@{ +#define BP_USB_OTGICR_IDEN (7U) //!< Bit position for USB_OTGICR_IDEN. +#define BM_USB_OTGICR_IDEN (0x80U) //!< Bit mask for USB_OTGICR_IDEN. +#define BS_USB_OTGICR_IDEN (1U) //!< Bit field size in bits for USB_OTGICR_IDEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGICR_IDEN field. +#define BR_USB_OTGICR_IDEN (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_IDEN)) +#endif + +//! @brief Format value for bitfield USB_OTGICR_IDEN. +#define BF_USB_OTGICR_IDEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGICR_IDEN), uint8_t) & BM_USB_OTGICR_IDEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the IDEN field to a new value. +#define BW_USB_OTGICR_IDEN(v) (BITBAND_ACCESS8(HW_USB_OTGICR_ADDR, BP_USB_OTGICR_IDEN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_OTGSTAT - OTG Status register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_OTGSTAT - OTG Status register (RW) + * + * Reset value: 0x00U + * + * Displays the actual value from the external comparator outputs of the ID pin + * and VBUS. + */ +typedef union _hw_usb_otgstat +{ + uint8_t U; + struct _hw_usb_otgstat_bitfields + { + uint8_t AVBUSVLD : 1; //!< [0] A VBUS Valid + uint8_t RESERVED0 : 1; //!< [1] + uint8_t BSESSEND : 1; //!< [2] B Session End + uint8_t SESS_VLD : 1; //!< [3] Session Valid + uint8_t RESERVED1 : 1; //!< [4] + uint8_t LINESTATESTABLE : 1; //!< [5] + uint8_t ONEMSECEN : 1; //!< [6] + uint8_t ID : 1; //!< [7] + } B; +} hw_usb_otgstat_t; +#endif + +/*! + * @name Constants and macros for entire USB_OTGSTAT register + */ +//@{ +#define HW_USB_OTGSTAT_ADDR (REGS_USB_BASE + 0x18U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_OTGSTAT (*(__IO hw_usb_otgstat_t *) HW_USB_OTGSTAT_ADDR) +#define HW_USB_OTGSTAT_RD() (HW_USB_OTGSTAT.U) +#define HW_USB_OTGSTAT_WR(v) (HW_USB_OTGSTAT.U = (v)) +#define HW_USB_OTGSTAT_SET(v) (HW_USB_OTGSTAT_WR(HW_USB_OTGSTAT_RD() | (v))) +#define HW_USB_OTGSTAT_CLR(v) (HW_USB_OTGSTAT_WR(HW_USB_OTGSTAT_RD() & ~(v))) +#define HW_USB_OTGSTAT_TOG(v) (HW_USB_OTGSTAT_WR(HW_USB_OTGSTAT_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_OTGSTAT bitfields + */ + +/*! + * @name Register USB_OTGSTAT, field AVBUSVLD[0] (RW) + * + * Values: + * - 0 - The VBUS voltage is below the A VBUS Valid threshold. + * - 1 - The VBUS voltage is above the A VBUS Valid threshold. + */ +//@{ +#define BP_USB_OTGSTAT_AVBUSVLD (0U) //!< Bit position for USB_OTGSTAT_AVBUSVLD. +#define BM_USB_OTGSTAT_AVBUSVLD (0x01U) //!< Bit mask for USB_OTGSTAT_AVBUSVLD. +#define BS_USB_OTGSTAT_AVBUSVLD (1U) //!< Bit field size in bits for USB_OTGSTAT_AVBUSVLD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGSTAT_AVBUSVLD field. +#define BR_USB_OTGSTAT_AVBUSVLD (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_AVBUSVLD)) +#endif + +//! @brief Format value for bitfield USB_OTGSTAT_AVBUSVLD. +#define BF_USB_OTGSTAT_AVBUSVLD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGSTAT_AVBUSVLD), uint8_t) & BM_USB_OTGSTAT_AVBUSVLD) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the AVBUSVLD field to a new value. +#define BW_USB_OTGSTAT_AVBUSVLD(v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_AVBUSVLD) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGSTAT, field BSESSEND[2] (RW) + * + * Values: + * - 0 - The VBUS voltage is above the B session end threshold. + * - 1 - The VBUS voltage is below the B session end threshold. + */ +//@{ +#define BP_USB_OTGSTAT_BSESSEND (2U) //!< Bit position for USB_OTGSTAT_BSESSEND. +#define BM_USB_OTGSTAT_BSESSEND (0x04U) //!< Bit mask for USB_OTGSTAT_BSESSEND. +#define BS_USB_OTGSTAT_BSESSEND (1U) //!< Bit field size in bits for USB_OTGSTAT_BSESSEND. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGSTAT_BSESSEND field. +#define BR_USB_OTGSTAT_BSESSEND (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_BSESSEND)) +#endif + +//! @brief Format value for bitfield USB_OTGSTAT_BSESSEND. +#define BF_USB_OTGSTAT_BSESSEND(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGSTAT_BSESSEND), uint8_t) & BM_USB_OTGSTAT_BSESSEND) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BSESSEND field to a new value. +#define BW_USB_OTGSTAT_BSESSEND(v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_BSESSEND) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGSTAT, field SESS_VLD[3] (RW) + * + * Values: + * - 0 - The VBUS voltage is below the B session valid threshold + * - 1 - The VBUS voltage is above the B session valid threshold. + */ +//@{ +#define BP_USB_OTGSTAT_SESS_VLD (3U) //!< Bit position for USB_OTGSTAT_SESS_VLD. +#define BM_USB_OTGSTAT_SESS_VLD (0x08U) //!< Bit mask for USB_OTGSTAT_SESS_VLD. +#define BS_USB_OTGSTAT_SESS_VLD (1U) //!< Bit field size in bits for USB_OTGSTAT_SESS_VLD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGSTAT_SESS_VLD field. +#define BR_USB_OTGSTAT_SESS_VLD (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_SESS_VLD)) +#endif + +//! @brief Format value for bitfield USB_OTGSTAT_SESS_VLD. +#define BF_USB_OTGSTAT_SESS_VLD(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGSTAT_SESS_VLD), uint8_t) & BM_USB_OTGSTAT_SESS_VLD) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SESS_VLD field to a new value. +#define BW_USB_OTGSTAT_SESS_VLD(v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_SESS_VLD) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGSTAT, field LINESTATESTABLE[5] (RW) + * + * Indicates that the internal signals that control the LINE_STATE_CHG field of + * OTGISTAT are stable for at least 1 millisecond. First read LINE_STATE_CHG + * field and then read this field. If this field reads as 1, then the value of + * LINE_STATE_CHG can be considered stable. + * + * Values: + * - 0 - The LINE_STAT_CHG bit is not yet stable. + * - 1 - The LINE_STAT_CHG bit has been debounced and is stable. + */ +//@{ +#define BP_USB_OTGSTAT_LINESTATESTABLE (5U) //!< Bit position for USB_OTGSTAT_LINESTATESTABLE. +#define BM_USB_OTGSTAT_LINESTATESTABLE (0x20U) //!< Bit mask for USB_OTGSTAT_LINESTATESTABLE. +#define BS_USB_OTGSTAT_LINESTATESTABLE (1U) //!< Bit field size in bits for USB_OTGSTAT_LINESTATESTABLE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGSTAT_LINESTATESTABLE field. +#define BR_USB_OTGSTAT_LINESTATESTABLE (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_LINESTATESTABLE)) +#endif + +//! @brief Format value for bitfield USB_OTGSTAT_LINESTATESTABLE. +#define BF_USB_OTGSTAT_LINESTATESTABLE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGSTAT_LINESTATESTABLE), uint8_t) & BM_USB_OTGSTAT_LINESTATESTABLE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the LINESTATESTABLE field to a new value. +#define BW_USB_OTGSTAT_LINESTATESTABLE(v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_LINESTATESTABLE) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGSTAT, field ONEMSECEN[6] (RW) + * + * This bit is reserved for the 1ms count, but it is not useful to software. + */ +//@{ +#define BP_USB_OTGSTAT_ONEMSECEN (6U) //!< Bit position for USB_OTGSTAT_ONEMSECEN. +#define BM_USB_OTGSTAT_ONEMSECEN (0x40U) //!< Bit mask for USB_OTGSTAT_ONEMSECEN. +#define BS_USB_OTGSTAT_ONEMSECEN (1U) //!< Bit field size in bits for USB_OTGSTAT_ONEMSECEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGSTAT_ONEMSECEN field. +#define BR_USB_OTGSTAT_ONEMSECEN (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_ONEMSECEN)) +#endif + +//! @brief Format value for bitfield USB_OTGSTAT_ONEMSECEN. +#define BF_USB_OTGSTAT_ONEMSECEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGSTAT_ONEMSECEN), uint8_t) & BM_USB_OTGSTAT_ONEMSECEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ONEMSECEN field to a new value. +#define BW_USB_OTGSTAT_ONEMSECEN(v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_ONEMSECEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGSTAT, field ID[7] (RW) + * + * Indicates the current state of the ID pin on the USB connector + * + * Values: + * - 0 - Indicates a Type A cable is plugged into the USB connector. + * - 1 - Indicates no cable is attached or a Type B cable is plugged into the + * USB connector. + */ +//@{ +#define BP_USB_OTGSTAT_ID (7U) //!< Bit position for USB_OTGSTAT_ID. +#define BM_USB_OTGSTAT_ID (0x80U) //!< Bit mask for USB_OTGSTAT_ID. +#define BS_USB_OTGSTAT_ID (1U) //!< Bit field size in bits for USB_OTGSTAT_ID. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGSTAT_ID field. +#define BR_USB_OTGSTAT_ID (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_ID)) +#endif + +//! @brief Format value for bitfield USB_OTGSTAT_ID. +#define BF_USB_OTGSTAT_ID(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGSTAT_ID), uint8_t) & BM_USB_OTGSTAT_ID) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ID field to a new value. +#define BW_USB_OTGSTAT_ID(v) (BITBAND_ACCESS8(HW_USB_OTGSTAT_ADDR, BP_USB_OTGSTAT_ID) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_OTGCTL - OTG Control register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_OTGCTL - OTG Control register (RW) + * + * Reset value: 0x00U + * + * Controls the operation of VBUS and Data Line termination resistors. + */ +typedef union _hw_usb_otgctl +{ + uint8_t U; + struct _hw_usb_otgctl_bitfields + { + uint8_t RESERVED0 : 2; //!< [1:0] + uint8_t OTGEN : 1; //!< [2] On-The-Go pullup/pulldown resistor enable + uint8_t RESERVED1 : 1; //!< [3] + uint8_t DMLOW : 1; //!< [4] D- Data Line pull-down resistor enable + uint8_t DPLOW : 1; //!< [5] D+ Data Line pull-down resistor enable + uint8_t RESERVED2 : 1; //!< [6] + uint8_t DPHIGH : 1; //!< [7] D+ Data Line pullup resistor enable + } B; +} hw_usb_otgctl_t; +#endif + +/*! + * @name Constants and macros for entire USB_OTGCTL register + */ +//@{ +#define HW_USB_OTGCTL_ADDR (REGS_USB_BASE + 0x1CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_OTGCTL (*(__IO hw_usb_otgctl_t *) HW_USB_OTGCTL_ADDR) +#define HW_USB_OTGCTL_RD() (HW_USB_OTGCTL.U) +#define HW_USB_OTGCTL_WR(v) (HW_USB_OTGCTL.U = (v)) +#define HW_USB_OTGCTL_SET(v) (HW_USB_OTGCTL_WR(HW_USB_OTGCTL_RD() | (v))) +#define HW_USB_OTGCTL_CLR(v) (HW_USB_OTGCTL_WR(HW_USB_OTGCTL_RD() & ~(v))) +#define HW_USB_OTGCTL_TOG(v) (HW_USB_OTGCTL_WR(HW_USB_OTGCTL_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_OTGCTL bitfields + */ + +/*! + * @name Register USB_OTGCTL, field OTGEN[2] (RW) + * + * Values: + * - 0 - If USB_EN is 1 and HOST_MODE is 0 in the Control Register (CTL), then + * the D+ Data Line pull-up resistors are enabled. If HOST_MODE is 1 the D+ + * and D- Data Line pull-down resistors are engaged. + * - 1 - The pull-up and pull-down controls in this register are used. + */ +//@{ +#define BP_USB_OTGCTL_OTGEN (2U) //!< Bit position for USB_OTGCTL_OTGEN. +#define BM_USB_OTGCTL_OTGEN (0x04U) //!< Bit mask for USB_OTGCTL_OTGEN. +#define BS_USB_OTGCTL_OTGEN (1U) //!< Bit field size in bits for USB_OTGCTL_OTGEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGCTL_OTGEN field. +#define BR_USB_OTGCTL_OTGEN (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR, BP_USB_OTGCTL_OTGEN)) +#endif + +//! @brief Format value for bitfield USB_OTGCTL_OTGEN. +#define BF_USB_OTGCTL_OTGEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGCTL_OTGEN), uint8_t) & BM_USB_OTGCTL_OTGEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the OTGEN field to a new value. +#define BW_USB_OTGCTL_OTGEN(v) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR, BP_USB_OTGCTL_OTGEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGCTL, field DMLOW[4] (RW) + * + * Values: + * - 0 - D- pulldown resistor is not enabled. + * - 1 - D- pulldown resistor is enabled. + */ +//@{ +#define BP_USB_OTGCTL_DMLOW (4U) //!< Bit position for USB_OTGCTL_DMLOW. +#define BM_USB_OTGCTL_DMLOW (0x10U) //!< Bit mask for USB_OTGCTL_DMLOW. +#define BS_USB_OTGCTL_DMLOW (1U) //!< Bit field size in bits for USB_OTGCTL_DMLOW. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGCTL_DMLOW field. +#define BR_USB_OTGCTL_DMLOW (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR, BP_USB_OTGCTL_DMLOW)) +#endif + +//! @brief Format value for bitfield USB_OTGCTL_DMLOW. +#define BF_USB_OTGCTL_DMLOW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGCTL_DMLOW), uint8_t) & BM_USB_OTGCTL_DMLOW) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DMLOW field to a new value. +#define BW_USB_OTGCTL_DMLOW(v) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR, BP_USB_OTGCTL_DMLOW) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGCTL, field DPLOW[5] (RW) + * + * This bit should always be enabled together with bit 4 (DMLOW) + * + * Values: + * - 0 - D+ pulldown resistor is not enabled. + * - 1 - D+ pulldown resistor is enabled. + */ +//@{ +#define BP_USB_OTGCTL_DPLOW (5U) //!< Bit position for USB_OTGCTL_DPLOW. +#define BM_USB_OTGCTL_DPLOW (0x20U) //!< Bit mask for USB_OTGCTL_DPLOW. +#define BS_USB_OTGCTL_DPLOW (1U) //!< Bit field size in bits for USB_OTGCTL_DPLOW. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGCTL_DPLOW field. +#define BR_USB_OTGCTL_DPLOW (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR, BP_USB_OTGCTL_DPLOW)) +#endif + +//! @brief Format value for bitfield USB_OTGCTL_DPLOW. +#define BF_USB_OTGCTL_DPLOW(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGCTL_DPLOW), uint8_t) & BM_USB_OTGCTL_DPLOW) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DPLOW field to a new value. +#define BW_USB_OTGCTL_DPLOW(v) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR, BP_USB_OTGCTL_DPLOW) = (v)) +#endif +//@} + +/*! + * @name Register USB_OTGCTL, field DPHIGH[7] (RW) + * + * Values: + * - 0 - D+ pullup resistor is not enabled + * - 1 - D+ pullup resistor is enabled + */ +//@{ +#define BP_USB_OTGCTL_DPHIGH (7U) //!< Bit position for USB_OTGCTL_DPHIGH. +#define BM_USB_OTGCTL_DPHIGH (0x80U) //!< Bit mask for USB_OTGCTL_DPHIGH. +#define BS_USB_OTGCTL_DPHIGH (1U) //!< Bit field size in bits for USB_OTGCTL_DPHIGH. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OTGCTL_DPHIGH field. +#define BR_USB_OTGCTL_DPHIGH (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR, BP_USB_OTGCTL_DPHIGH)) +#endif + +//! @brief Format value for bitfield USB_OTGCTL_DPHIGH. +#define BF_USB_OTGCTL_DPHIGH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_OTGCTL_DPHIGH), uint8_t) & BM_USB_OTGCTL_DPHIGH) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DPHIGH field to a new value. +#define BW_USB_OTGCTL_DPHIGH(v) (BITBAND_ACCESS8(HW_USB_OTGCTL_ADDR, BP_USB_OTGCTL_DPHIGH) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_ISTAT - Interrupt Status register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_ISTAT - Interrupt Status register (W1C) + * + * Reset value: 0x00U + * + * Contains fields for each of the interrupt sources within the USB Module. Each + * of these fields are qualified with their respective interrupt enable bits. + * All fields of this register are logically OR'd together along with the OTG + * Interrupt Status Register (OTGSTAT) to form a single interrupt source for the + * processor's interrupt controller. After an interrupt bit has been set it may only + * be cleared by writing a one to the respective interrupt bit. This register + * contains the value of 0x00 after a reset. + */ +typedef union _hw_usb_istat +{ + uint8_t U; + struct _hw_usb_istat_bitfields + { + uint8_t USBRST : 1; //!< [0] + uint8_t ERROR : 1; //!< [1] + uint8_t SOFTOK : 1; //!< [2] + uint8_t TOKDNE : 1; //!< [3] + uint8_t SLEEP : 1; //!< [4] + uint8_t RESUME : 1; //!< [5] + uint8_t ATTACH : 1; //!< [6] Attach Interrupt + uint8_t STALL : 1; //!< [7] Stall Interrupt + } B; +} hw_usb_istat_t; +#endif + +/*! + * @name Constants and macros for entire USB_ISTAT register + */ +//@{ +#define HW_USB_ISTAT_ADDR (REGS_USB_BASE + 0x80U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_ISTAT (*(__IO hw_usb_istat_t *) HW_USB_ISTAT_ADDR) +#define HW_USB_ISTAT_RD() (HW_USB_ISTAT.U) +#define HW_USB_ISTAT_WR(v) (HW_USB_ISTAT.U = (v)) +#define HW_USB_ISTAT_SET(v) (HW_USB_ISTAT_WR(HW_USB_ISTAT_RD() | (v))) +#define HW_USB_ISTAT_CLR(v) (HW_USB_ISTAT_WR(HW_USB_ISTAT_RD() & ~(v))) +#define HW_USB_ISTAT_TOG(v) (HW_USB_ISTAT_WR(HW_USB_ISTAT_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_ISTAT bitfields + */ + +/*! + * @name Register USB_ISTAT, field USBRST[0] (W1C) + * + * This bit is set when the USB Module has decoded a valid USB reset. This + * informs the processor that it should write 0x00 into the address register and + * enable endpoint 0. USBRST is set after a USB reset has been detected for 2.5 + * microseconds. It is not asserted again until the USB reset condition has been + * removed and then reasserted. + */ +//@{ +#define BP_USB_ISTAT_USBRST (0U) //!< Bit position for USB_ISTAT_USBRST. +#define BM_USB_ISTAT_USBRST (0x01U) //!< Bit mask for USB_ISTAT_USBRST. +#define BS_USB_ISTAT_USBRST (1U) //!< Bit field size in bits for USB_ISTAT_USBRST. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ISTAT_USBRST field. +#define BR_USB_ISTAT_USBRST (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_USBRST)) +#endif + +//! @brief Format value for bitfield USB_ISTAT_USBRST. +#define BF_USB_ISTAT_USBRST(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ISTAT_USBRST), uint8_t) & BM_USB_ISTAT_USBRST) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the USBRST field to a new value. +#define BW_USB_ISTAT_USBRST(v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_USBRST) = (v)) +#endif +//@} + +/*! + * @name Register USB_ISTAT, field ERROR[1] (W1C) + * + * This bit is set when any of the error conditions within Error Interrupt + * Status (ERRSTAT) register occur. The processor must then read the ERRSTAT register + * to determine the source of the error. + */ +//@{ +#define BP_USB_ISTAT_ERROR (1U) //!< Bit position for USB_ISTAT_ERROR. +#define BM_USB_ISTAT_ERROR (0x02U) //!< Bit mask for USB_ISTAT_ERROR. +#define BS_USB_ISTAT_ERROR (1U) //!< Bit field size in bits for USB_ISTAT_ERROR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ISTAT_ERROR field. +#define BR_USB_ISTAT_ERROR (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_ERROR)) +#endif + +//! @brief Format value for bitfield USB_ISTAT_ERROR. +#define BF_USB_ISTAT_ERROR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ISTAT_ERROR), uint8_t) & BM_USB_ISTAT_ERROR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ERROR field to a new value. +#define BW_USB_ISTAT_ERROR(v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_ERROR) = (v)) +#endif +//@} + +/*! + * @name Register USB_ISTAT, field SOFTOK[2] (W1C) + * + * This bit is set when the USB Module receives a Start Of Frame (SOF) token. In + * Host mode this field is set when the SOF threshold is reached, so that + * software can prepare for the next SOF. + */ +//@{ +#define BP_USB_ISTAT_SOFTOK (2U) //!< Bit position for USB_ISTAT_SOFTOK. +#define BM_USB_ISTAT_SOFTOK (0x04U) //!< Bit mask for USB_ISTAT_SOFTOK. +#define BS_USB_ISTAT_SOFTOK (1U) //!< Bit field size in bits for USB_ISTAT_SOFTOK. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ISTAT_SOFTOK field. +#define BR_USB_ISTAT_SOFTOK (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_SOFTOK)) +#endif + +//! @brief Format value for bitfield USB_ISTAT_SOFTOK. +#define BF_USB_ISTAT_SOFTOK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ISTAT_SOFTOK), uint8_t) & BM_USB_ISTAT_SOFTOK) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SOFTOK field to a new value. +#define BW_USB_ISTAT_SOFTOK(v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_SOFTOK) = (v)) +#endif +//@} + +/*! + * @name Register USB_ISTAT, field TOKDNE[3] (W1C) + * + * This bit is set when the current token being processed has completed. The + * processor must immediately read the STATUS (STAT) register to determine the + * EndPoint and BD used for this token. Clearing this bit (by writing a one) causes + * STAT to be cleared or the STAT holding register to be loaded into the STAT + * register. + */ +//@{ +#define BP_USB_ISTAT_TOKDNE (3U) //!< Bit position for USB_ISTAT_TOKDNE. +#define BM_USB_ISTAT_TOKDNE (0x08U) //!< Bit mask for USB_ISTAT_TOKDNE. +#define BS_USB_ISTAT_TOKDNE (1U) //!< Bit field size in bits for USB_ISTAT_TOKDNE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ISTAT_TOKDNE field. +#define BR_USB_ISTAT_TOKDNE (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_TOKDNE)) +#endif + +//! @brief Format value for bitfield USB_ISTAT_TOKDNE. +#define BF_USB_ISTAT_TOKDNE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ISTAT_TOKDNE), uint8_t) & BM_USB_ISTAT_TOKDNE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TOKDNE field to a new value. +#define BW_USB_ISTAT_TOKDNE(v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_TOKDNE) = (v)) +#endif +//@} + +/*! + * @name Register USB_ISTAT, field SLEEP[4] (W1C) + * + * This bit is set when the USB Module detects a constant idle on the USB bus + * for 3 ms. The sleep timer is reset by activity on the USB bus. + */ +//@{ +#define BP_USB_ISTAT_SLEEP (4U) //!< Bit position for USB_ISTAT_SLEEP. +#define BM_USB_ISTAT_SLEEP (0x10U) //!< Bit mask for USB_ISTAT_SLEEP. +#define BS_USB_ISTAT_SLEEP (1U) //!< Bit field size in bits for USB_ISTAT_SLEEP. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ISTAT_SLEEP field. +#define BR_USB_ISTAT_SLEEP (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_SLEEP)) +#endif + +//! @brief Format value for bitfield USB_ISTAT_SLEEP. +#define BF_USB_ISTAT_SLEEP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ISTAT_SLEEP), uint8_t) & BM_USB_ISTAT_SLEEP) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SLEEP field to a new value. +#define BW_USB_ISTAT_SLEEP(v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_SLEEP) = (v)) +#endif +//@} + +/*! + * @name Register USB_ISTAT, field RESUME[5] (W1C) + * + * This bit is set when a K-state is observed on the DP/DM signals for 2.5 us. + * When not in suspend mode this interrupt must be disabled. + */ +//@{ +#define BP_USB_ISTAT_RESUME (5U) //!< Bit position for USB_ISTAT_RESUME. +#define BM_USB_ISTAT_RESUME (0x20U) //!< Bit mask for USB_ISTAT_RESUME. +#define BS_USB_ISTAT_RESUME (1U) //!< Bit field size in bits for USB_ISTAT_RESUME. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ISTAT_RESUME field. +#define BR_USB_ISTAT_RESUME (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_RESUME)) +#endif + +//! @brief Format value for bitfield USB_ISTAT_RESUME. +#define BF_USB_ISTAT_RESUME(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ISTAT_RESUME), uint8_t) & BM_USB_ISTAT_RESUME) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the RESUME field to a new value. +#define BW_USB_ISTAT_RESUME(v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_RESUME) = (v)) +#endif +//@} + +/*! + * @name Register USB_ISTAT, field ATTACH[6] (W1C) + * + * This bit is set when the USB Module detects an attach of a USB device. This + * signal is only valid if HOSTMODEEN is true. This interrupt signifies that a + * peripheral is now present and must be configured; it is asserted if there have + * been no transitions on the USB for 2.5 us and the current bus state is not SE0." + */ +//@{ +#define BP_USB_ISTAT_ATTACH (6U) //!< Bit position for USB_ISTAT_ATTACH. +#define BM_USB_ISTAT_ATTACH (0x40U) //!< Bit mask for USB_ISTAT_ATTACH. +#define BS_USB_ISTAT_ATTACH (1U) //!< Bit field size in bits for USB_ISTAT_ATTACH. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ISTAT_ATTACH field. +#define BR_USB_ISTAT_ATTACH (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_ATTACH)) +#endif + +//! @brief Format value for bitfield USB_ISTAT_ATTACH. +#define BF_USB_ISTAT_ATTACH(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ISTAT_ATTACH), uint8_t) & BM_USB_ISTAT_ATTACH) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ATTACH field to a new value. +#define BW_USB_ISTAT_ATTACH(v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_ATTACH) = (v)) +#endif +//@} + +/*! + * @name Register USB_ISTAT, field STALL[7] (W1C) + * + * In Target mode this bit is asserted when a STALL handshake is sent by the + * SIE. In Host mode this bit is set when the USB Module detects a STALL acknowledge + * during the handshake phase of a USB transaction.This interrupt can be used to + * determine whether the last USB transaction was completed successfully or + * stalled. + */ +//@{ +#define BP_USB_ISTAT_STALL (7U) //!< Bit position for USB_ISTAT_STALL. +#define BM_USB_ISTAT_STALL (0x80U) //!< Bit mask for USB_ISTAT_STALL. +#define BS_USB_ISTAT_STALL (1U) //!< Bit field size in bits for USB_ISTAT_STALL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ISTAT_STALL field. +#define BR_USB_ISTAT_STALL (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_STALL)) +#endif + +//! @brief Format value for bitfield USB_ISTAT_STALL. +#define BF_USB_ISTAT_STALL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ISTAT_STALL), uint8_t) & BM_USB_ISTAT_STALL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the STALL field to a new value. +#define BW_USB_ISTAT_STALL(v) (BITBAND_ACCESS8(HW_USB_ISTAT_ADDR, BP_USB_ISTAT_STALL) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_INTEN - Interrupt Enable register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_INTEN - Interrupt Enable register (RW) + * + * Reset value: 0x00U + * + * Contains enable fields for each of the interrupt sources within the USB + * Module. Setting any of these bits enables the respective interrupt source in the + * ISTAT register. This register contains the value of 0x00 after a reset. + */ +typedef union _hw_usb_inten +{ + uint8_t U; + struct _hw_usb_inten_bitfields + { + uint8_t USBRSTEN : 1; //!< [0] USBRST Interrupt Enable + uint8_t ERROREN : 1; //!< [1] ERROR Interrupt Enable + uint8_t SOFTOKEN : 1; //!< [2] SOFTOK Interrupt Enable + uint8_t TOKDNEEN : 1; //!< [3] TOKDNE Interrupt Enable + uint8_t SLEEPEN : 1; //!< [4] SLEEP Interrupt Enable + uint8_t RESUMEEN : 1; //!< [5] RESUME Interrupt Enable + uint8_t ATTACHEN : 1; //!< [6] ATTACH Interrupt Enable + uint8_t STALLEN : 1; //!< [7] STALL Interrupt Enable + } B; +} hw_usb_inten_t; +#endif + +/*! + * @name Constants and macros for entire USB_INTEN register + */ +//@{ +#define HW_USB_INTEN_ADDR (REGS_USB_BASE + 0x84U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_INTEN (*(__IO hw_usb_inten_t *) HW_USB_INTEN_ADDR) +#define HW_USB_INTEN_RD() (HW_USB_INTEN.U) +#define HW_USB_INTEN_WR(v) (HW_USB_INTEN.U = (v)) +#define HW_USB_INTEN_SET(v) (HW_USB_INTEN_WR(HW_USB_INTEN_RD() | (v))) +#define HW_USB_INTEN_CLR(v) (HW_USB_INTEN_WR(HW_USB_INTEN_RD() & ~(v))) +#define HW_USB_INTEN_TOG(v) (HW_USB_INTEN_WR(HW_USB_INTEN_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_INTEN bitfields + */ + +/*! + * @name Register USB_INTEN, field USBRSTEN[0] (RW) + * + * Values: + * - 0 - Disables the USBRST interrupt. + * - 1 - Enables the USBRST interrupt. + */ +//@{ +#define BP_USB_INTEN_USBRSTEN (0U) //!< Bit position for USB_INTEN_USBRSTEN. +#define BM_USB_INTEN_USBRSTEN (0x01U) //!< Bit mask for USB_INTEN_USBRSTEN. +#define BS_USB_INTEN_USBRSTEN (1U) //!< Bit field size in bits for USB_INTEN_USBRSTEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_INTEN_USBRSTEN field. +#define BR_USB_INTEN_USBRSTEN (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_USBRSTEN)) +#endif + +//! @brief Format value for bitfield USB_INTEN_USBRSTEN. +#define BF_USB_INTEN_USBRSTEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_INTEN_USBRSTEN), uint8_t) & BM_USB_INTEN_USBRSTEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the USBRSTEN field to a new value. +#define BW_USB_INTEN_USBRSTEN(v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_USBRSTEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_INTEN, field ERROREN[1] (RW) + * + * Values: + * - 0 - Disables the ERROR interrupt. + * - 1 - Enables the ERROR interrupt. + */ +//@{ +#define BP_USB_INTEN_ERROREN (1U) //!< Bit position for USB_INTEN_ERROREN. +#define BM_USB_INTEN_ERROREN (0x02U) //!< Bit mask for USB_INTEN_ERROREN. +#define BS_USB_INTEN_ERROREN (1U) //!< Bit field size in bits for USB_INTEN_ERROREN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_INTEN_ERROREN field. +#define BR_USB_INTEN_ERROREN (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_ERROREN)) +#endif + +//! @brief Format value for bitfield USB_INTEN_ERROREN. +#define BF_USB_INTEN_ERROREN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_INTEN_ERROREN), uint8_t) & BM_USB_INTEN_ERROREN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ERROREN field to a new value. +#define BW_USB_INTEN_ERROREN(v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_ERROREN) = (v)) +#endif +//@} + +/*! + * @name Register USB_INTEN, field SOFTOKEN[2] (RW) + * + * Values: + * - 0 - Disbles the SOFTOK interrupt. + * - 1 - Enables the SOFTOK interrupt. + */ +//@{ +#define BP_USB_INTEN_SOFTOKEN (2U) //!< Bit position for USB_INTEN_SOFTOKEN. +#define BM_USB_INTEN_SOFTOKEN (0x04U) //!< Bit mask for USB_INTEN_SOFTOKEN. +#define BS_USB_INTEN_SOFTOKEN (1U) //!< Bit field size in bits for USB_INTEN_SOFTOKEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_INTEN_SOFTOKEN field. +#define BR_USB_INTEN_SOFTOKEN (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_SOFTOKEN)) +#endif + +//! @brief Format value for bitfield USB_INTEN_SOFTOKEN. +#define BF_USB_INTEN_SOFTOKEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_INTEN_SOFTOKEN), uint8_t) & BM_USB_INTEN_SOFTOKEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SOFTOKEN field to a new value. +#define BW_USB_INTEN_SOFTOKEN(v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_SOFTOKEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_INTEN, field TOKDNEEN[3] (RW) + * + * Values: + * - 0 - Disables the TOKDNE interrupt. + * - 1 - Enables the TOKDNE interrupt. + */ +//@{ +#define BP_USB_INTEN_TOKDNEEN (3U) //!< Bit position for USB_INTEN_TOKDNEEN. +#define BM_USB_INTEN_TOKDNEEN (0x08U) //!< Bit mask for USB_INTEN_TOKDNEEN. +#define BS_USB_INTEN_TOKDNEEN (1U) //!< Bit field size in bits for USB_INTEN_TOKDNEEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_INTEN_TOKDNEEN field. +#define BR_USB_INTEN_TOKDNEEN (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_TOKDNEEN)) +#endif + +//! @brief Format value for bitfield USB_INTEN_TOKDNEEN. +#define BF_USB_INTEN_TOKDNEEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_INTEN_TOKDNEEN), uint8_t) & BM_USB_INTEN_TOKDNEEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TOKDNEEN field to a new value. +#define BW_USB_INTEN_TOKDNEEN(v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_TOKDNEEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_INTEN, field SLEEPEN[4] (RW) + * + * Values: + * - 0 - Disables the SLEEP interrupt. + * - 1 - Enables the SLEEP interrupt. + */ +//@{ +#define BP_USB_INTEN_SLEEPEN (4U) //!< Bit position for USB_INTEN_SLEEPEN. +#define BM_USB_INTEN_SLEEPEN (0x10U) //!< Bit mask for USB_INTEN_SLEEPEN. +#define BS_USB_INTEN_SLEEPEN (1U) //!< Bit field size in bits for USB_INTEN_SLEEPEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_INTEN_SLEEPEN field. +#define BR_USB_INTEN_SLEEPEN (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_SLEEPEN)) +#endif + +//! @brief Format value for bitfield USB_INTEN_SLEEPEN. +#define BF_USB_INTEN_SLEEPEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_INTEN_SLEEPEN), uint8_t) & BM_USB_INTEN_SLEEPEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SLEEPEN field to a new value. +#define BW_USB_INTEN_SLEEPEN(v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_SLEEPEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_INTEN, field RESUMEEN[5] (RW) + * + * Values: + * - 0 - Disables the RESUME interrupt. + * - 1 - Enables the RESUME interrupt. + */ +//@{ +#define BP_USB_INTEN_RESUMEEN (5U) //!< Bit position for USB_INTEN_RESUMEEN. +#define BM_USB_INTEN_RESUMEEN (0x20U) //!< Bit mask for USB_INTEN_RESUMEEN. +#define BS_USB_INTEN_RESUMEEN (1U) //!< Bit field size in bits for USB_INTEN_RESUMEEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_INTEN_RESUMEEN field. +#define BR_USB_INTEN_RESUMEEN (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_RESUMEEN)) +#endif + +//! @brief Format value for bitfield USB_INTEN_RESUMEEN. +#define BF_USB_INTEN_RESUMEEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_INTEN_RESUMEEN), uint8_t) & BM_USB_INTEN_RESUMEEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the RESUMEEN field to a new value. +#define BW_USB_INTEN_RESUMEEN(v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_RESUMEEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_INTEN, field ATTACHEN[6] (RW) + * + * Values: + * - 0 - Disables the ATTACH interrupt. + * - 1 - Enables the ATTACH interrupt. + */ +//@{ +#define BP_USB_INTEN_ATTACHEN (6U) //!< Bit position for USB_INTEN_ATTACHEN. +#define BM_USB_INTEN_ATTACHEN (0x40U) //!< Bit mask for USB_INTEN_ATTACHEN. +#define BS_USB_INTEN_ATTACHEN (1U) //!< Bit field size in bits for USB_INTEN_ATTACHEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_INTEN_ATTACHEN field. +#define BR_USB_INTEN_ATTACHEN (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_ATTACHEN)) +#endif + +//! @brief Format value for bitfield USB_INTEN_ATTACHEN. +#define BF_USB_INTEN_ATTACHEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_INTEN_ATTACHEN), uint8_t) & BM_USB_INTEN_ATTACHEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ATTACHEN field to a new value. +#define BW_USB_INTEN_ATTACHEN(v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_ATTACHEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_INTEN, field STALLEN[7] (RW) + * + * Values: + * - 0 - Diasbles the STALL interrupt. + * - 1 - Enables the STALL interrupt. + */ +//@{ +#define BP_USB_INTEN_STALLEN (7U) //!< Bit position for USB_INTEN_STALLEN. +#define BM_USB_INTEN_STALLEN (0x80U) //!< Bit mask for USB_INTEN_STALLEN. +#define BS_USB_INTEN_STALLEN (1U) //!< Bit field size in bits for USB_INTEN_STALLEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_INTEN_STALLEN field. +#define BR_USB_INTEN_STALLEN (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_STALLEN)) +#endif + +//! @brief Format value for bitfield USB_INTEN_STALLEN. +#define BF_USB_INTEN_STALLEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_INTEN_STALLEN), uint8_t) & BM_USB_INTEN_STALLEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the STALLEN field to a new value. +#define BW_USB_INTEN_STALLEN(v) (BITBAND_ACCESS8(HW_USB_INTEN_ADDR, BP_USB_INTEN_STALLEN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_ERRSTAT - Error Interrupt Status register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_ERRSTAT - Error Interrupt Status register (RW) + * + * Reset value: 0x00U + * + * Contains enable bits for each of the error sources within the USB Module. + * Each of these bits are qualified with their respective error enable bits. All + * bits of this register are logically OR'd together and the result placed in the + * ERROR bit of the ISTAT register. After an interrupt bit has been set it may only + * be cleared by writing a one to the respective interrupt bit. Each bit is set + * as soon as the error condition is detected. Therefore, the interrupt does not + * typically correspond with the end of a token being processed. This register + * contains the value of 0x00 after a reset. + */ +typedef union _hw_usb_errstat +{ + uint8_t U; + struct _hw_usb_errstat_bitfields + { + uint8_t PIDERR : 1; //!< [0] + uint8_t CRC5EOF : 1; //!< [1] + uint8_t CRC16 : 1; //!< [2] + uint8_t DFN8 : 1; //!< [3] + uint8_t BTOERR : 1; //!< [4] + uint8_t DMAERR : 1; //!< [5] + uint8_t RESERVED0 : 1; //!< [6] + uint8_t BTSERR : 1; //!< [7] + } B; +} hw_usb_errstat_t; +#endif + +/*! + * @name Constants and macros for entire USB_ERRSTAT register + */ +//@{ +#define HW_USB_ERRSTAT_ADDR (REGS_USB_BASE + 0x88U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_ERRSTAT (*(__IO hw_usb_errstat_t *) HW_USB_ERRSTAT_ADDR) +#define HW_USB_ERRSTAT_RD() (HW_USB_ERRSTAT.U) +#define HW_USB_ERRSTAT_WR(v) (HW_USB_ERRSTAT.U = (v)) +#define HW_USB_ERRSTAT_SET(v) (HW_USB_ERRSTAT_WR(HW_USB_ERRSTAT_RD() | (v))) +#define HW_USB_ERRSTAT_CLR(v) (HW_USB_ERRSTAT_WR(HW_USB_ERRSTAT_RD() & ~(v))) +#define HW_USB_ERRSTAT_TOG(v) (HW_USB_ERRSTAT_WR(HW_USB_ERRSTAT_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_ERRSTAT bitfields + */ + +/*! + * @name Register USB_ERRSTAT, field PIDERR[0] (W1C) + * + * This bit is set when the PID check field fails. + */ +//@{ +#define BP_USB_ERRSTAT_PIDERR (0U) //!< Bit position for USB_ERRSTAT_PIDERR. +#define BM_USB_ERRSTAT_PIDERR (0x01U) //!< Bit mask for USB_ERRSTAT_PIDERR. +#define BS_USB_ERRSTAT_PIDERR (1U) //!< Bit field size in bits for USB_ERRSTAT_PIDERR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERRSTAT_PIDERR field. +#define BR_USB_ERRSTAT_PIDERR (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_PIDERR)) +#endif + +//! @brief Format value for bitfield USB_ERRSTAT_PIDERR. +#define BF_USB_ERRSTAT_PIDERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERRSTAT_PIDERR), uint8_t) & BM_USB_ERRSTAT_PIDERR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PIDERR field to a new value. +#define BW_USB_ERRSTAT_PIDERR(v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_PIDERR) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERRSTAT, field CRC5EOF[1] (W1C) + * + * This error interrupt has two functions. When the USB Module is operating in + * peripheral mode (HOSTMODEEN=0), this interrupt detects CRC5 errors in the token + * packets generated by the host. If set the token packet was rejected due to a + * CRC5 error. When the USB Module is operating in host mode (HOSTMODEEN=1), this + * interrupt detects End Of Frame (EOF) error conditions. This occurs when the + * USB Module is transmitting or receiving data and the SOF counter reaches zero. + * This interrupt is useful when developing USB packet scheduling software to + * ensure that no USB transactions cross the start of the next frame. + */ +//@{ +#define BP_USB_ERRSTAT_CRC5EOF (1U) //!< Bit position for USB_ERRSTAT_CRC5EOF. +#define BM_USB_ERRSTAT_CRC5EOF (0x02U) //!< Bit mask for USB_ERRSTAT_CRC5EOF. +#define BS_USB_ERRSTAT_CRC5EOF (1U) //!< Bit field size in bits for USB_ERRSTAT_CRC5EOF. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERRSTAT_CRC5EOF field. +#define BR_USB_ERRSTAT_CRC5EOF (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_CRC5EOF)) +#endif + +//! @brief Format value for bitfield USB_ERRSTAT_CRC5EOF. +#define BF_USB_ERRSTAT_CRC5EOF(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERRSTAT_CRC5EOF), uint8_t) & BM_USB_ERRSTAT_CRC5EOF) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CRC5EOF field to a new value. +#define BW_USB_ERRSTAT_CRC5EOF(v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_CRC5EOF) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERRSTAT, field CRC16[2] (W1C) + * + * This bit is set when a data packet is rejected due to a CRC16 error. + */ +//@{ +#define BP_USB_ERRSTAT_CRC16 (2U) //!< Bit position for USB_ERRSTAT_CRC16. +#define BM_USB_ERRSTAT_CRC16 (0x04U) //!< Bit mask for USB_ERRSTAT_CRC16. +#define BS_USB_ERRSTAT_CRC16 (1U) //!< Bit field size in bits for USB_ERRSTAT_CRC16. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERRSTAT_CRC16 field. +#define BR_USB_ERRSTAT_CRC16 (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_CRC16)) +#endif + +//! @brief Format value for bitfield USB_ERRSTAT_CRC16. +#define BF_USB_ERRSTAT_CRC16(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERRSTAT_CRC16), uint8_t) & BM_USB_ERRSTAT_CRC16) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CRC16 field to a new value. +#define BW_USB_ERRSTAT_CRC16(v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_CRC16) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERRSTAT, field DFN8[3] (W1C) + * + * This bit is set if the data field received was not 8 bits in length. USB + * Specification 1.0 requires that data fields be an integral number of bytes. If the + * data field was not an integral number of bytes, this bit is set. + */ +//@{ +#define BP_USB_ERRSTAT_DFN8 (3U) //!< Bit position for USB_ERRSTAT_DFN8. +#define BM_USB_ERRSTAT_DFN8 (0x08U) //!< Bit mask for USB_ERRSTAT_DFN8. +#define BS_USB_ERRSTAT_DFN8 (1U) //!< Bit field size in bits for USB_ERRSTAT_DFN8. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERRSTAT_DFN8 field. +#define BR_USB_ERRSTAT_DFN8 (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_DFN8)) +#endif + +//! @brief Format value for bitfield USB_ERRSTAT_DFN8. +#define BF_USB_ERRSTAT_DFN8(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERRSTAT_DFN8), uint8_t) & BM_USB_ERRSTAT_DFN8) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DFN8 field to a new value. +#define BW_USB_ERRSTAT_DFN8(v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_DFN8) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERRSTAT, field BTOERR[4] (W1C) + * + * This bit is set when a bus turnaround timeout error occurs. The USB module + * contains a bus turnaround timer that keeps track of the amount of time elapsed + * between the token and data phases of a SETUP or OUT TOKEN or the data and + * handshake phases of a IN TOKEN. If more than 16 bit times are counted from the + * previous EOP before a transition from IDLE, a bus turnaround timeout error occurs. + */ +//@{ +#define BP_USB_ERRSTAT_BTOERR (4U) //!< Bit position for USB_ERRSTAT_BTOERR. +#define BM_USB_ERRSTAT_BTOERR (0x10U) //!< Bit mask for USB_ERRSTAT_BTOERR. +#define BS_USB_ERRSTAT_BTOERR (1U) //!< Bit field size in bits for USB_ERRSTAT_BTOERR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERRSTAT_BTOERR field. +#define BR_USB_ERRSTAT_BTOERR (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_BTOERR)) +#endif + +//! @brief Format value for bitfield USB_ERRSTAT_BTOERR. +#define BF_USB_ERRSTAT_BTOERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERRSTAT_BTOERR), uint8_t) & BM_USB_ERRSTAT_BTOERR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BTOERR field to a new value. +#define BW_USB_ERRSTAT_BTOERR(v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_BTOERR) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERRSTAT, field DMAERR[5] (W1C) + * + * This bit is set if the USB Module has requested a DMA access to read a new + * BDT but has not been given the bus before it needs to receive or transmit data. + * If processing a TX transfer this would cause a transmit data underflow + * condition. If processing a RX transfer this would cause a receive data overflow + * condition. This interrupt is useful when developing device arbitration hardware for + * the microprocessor and the USB module to minimize bus request and bus grant + * latency. This bit is also set if a data packet to or from the host is larger + * than the buffer size allocated in the BDT. In this case the data packet is + * truncated as it is put in buffer memory. + */ +//@{ +#define BP_USB_ERRSTAT_DMAERR (5U) //!< Bit position for USB_ERRSTAT_DMAERR. +#define BM_USB_ERRSTAT_DMAERR (0x20U) //!< Bit mask for USB_ERRSTAT_DMAERR. +#define BS_USB_ERRSTAT_DMAERR (1U) //!< Bit field size in bits for USB_ERRSTAT_DMAERR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERRSTAT_DMAERR field. +#define BR_USB_ERRSTAT_DMAERR (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_DMAERR)) +#endif + +//! @brief Format value for bitfield USB_ERRSTAT_DMAERR. +#define BF_USB_ERRSTAT_DMAERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERRSTAT_DMAERR), uint8_t) & BM_USB_ERRSTAT_DMAERR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DMAERR field to a new value. +#define BW_USB_ERRSTAT_DMAERR(v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_DMAERR) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERRSTAT, field BTSERR[7] (W1C) + * + * This bit is set when a bit stuff error is detected. If set, the corresponding + * packet is rejected due to the error. + */ +//@{ +#define BP_USB_ERRSTAT_BTSERR (7U) //!< Bit position for USB_ERRSTAT_BTSERR. +#define BM_USB_ERRSTAT_BTSERR (0x80U) //!< Bit mask for USB_ERRSTAT_BTSERR. +#define BS_USB_ERRSTAT_BTSERR (1U) //!< Bit field size in bits for USB_ERRSTAT_BTSERR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERRSTAT_BTSERR field. +#define BR_USB_ERRSTAT_BTSERR (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_BTSERR)) +#endif + +//! @brief Format value for bitfield USB_ERRSTAT_BTSERR. +#define BF_USB_ERRSTAT_BTSERR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERRSTAT_BTSERR), uint8_t) & BM_USB_ERRSTAT_BTSERR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BTSERR field to a new value. +#define BW_USB_ERRSTAT_BTSERR(v) (BITBAND_ACCESS8(HW_USB_ERRSTAT_ADDR, BP_USB_ERRSTAT_BTSERR) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_ERREN - Error Interrupt Enable register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_ERREN - Error Interrupt Enable register (RW) + * + * Reset value: 0x00U + * + * Contains enable bits for each of the error interrupt sources within the USB + * module. Setting any of these bits enables the respective interrupt source in + * ERRSTAT. Each bit is set as soon as the error condition is detected. Therefore, + * the interrupt does not typically correspond with the end of a token being + * processed. This register contains the value of 0x00 after a reset. + */ +typedef union _hw_usb_erren +{ + uint8_t U; + struct _hw_usb_erren_bitfields + { + uint8_t PIDERREN : 1; //!< [0] PIDERR Interrupt Enable + uint8_t CRC5EOFEN : 1; //!< [1] CRC5/EOF Interrupt Enable + uint8_t CRC16EN : 1; //!< [2] CRC16 Interrupt Enable + uint8_t DFN8EN : 1; //!< [3] DFN8 Interrupt Enable + uint8_t BTOERREN : 1; //!< [4] BTOERR Interrupt Enable + uint8_t DMAERREN : 1; //!< [5] DMAERR Interrupt Enable + uint8_t RESERVED0 : 1; //!< [6] + uint8_t BTSERREN : 1; //!< [7] BTSERR Interrupt Enable + } B; +} hw_usb_erren_t; +#endif + +/*! + * @name Constants and macros for entire USB_ERREN register + */ +//@{ +#define HW_USB_ERREN_ADDR (REGS_USB_BASE + 0x8CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_ERREN (*(__IO hw_usb_erren_t *) HW_USB_ERREN_ADDR) +#define HW_USB_ERREN_RD() (HW_USB_ERREN.U) +#define HW_USB_ERREN_WR(v) (HW_USB_ERREN.U = (v)) +#define HW_USB_ERREN_SET(v) (HW_USB_ERREN_WR(HW_USB_ERREN_RD() | (v))) +#define HW_USB_ERREN_CLR(v) (HW_USB_ERREN_WR(HW_USB_ERREN_RD() & ~(v))) +#define HW_USB_ERREN_TOG(v) (HW_USB_ERREN_WR(HW_USB_ERREN_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_ERREN bitfields + */ + +/*! + * @name Register USB_ERREN, field PIDERREN[0] (RW) + * + * Values: + * - 0 - Disables the PIDERR interrupt. + * - 1 - Enters the PIDERR interrupt. + */ +//@{ +#define BP_USB_ERREN_PIDERREN (0U) //!< Bit position for USB_ERREN_PIDERREN. +#define BM_USB_ERREN_PIDERREN (0x01U) //!< Bit mask for USB_ERREN_PIDERREN. +#define BS_USB_ERREN_PIDERREN (1U) //!< Bit field size in bits for USB_ERREN_PIDERREN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERREN_PIDERREN field. +#define BR_USB_ERREN_PIDERREN (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_PIDERREN)) +#endif + +//! @brief Format value for bitfield USB_ERREN_PIDERREN. +#define BF_USB_ERREN_PIDERREN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERREN_PIDERREN), uint8_t) & BM_USB_ERREN_PIDERREN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PIDERREN field to a new value. +#define BW_USB_ERREN_PIDERREN(v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_PIDERREN) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERREN, field CRC5EOFEN[1] (RW) + * + * Values: + * - 0 - Disables the CRC5/EOF interrupt. + * - 1 - Enables the CRC5/EOF interrupt. + */ +//@{ +#define BP_USB_ERREN_CRC5EOFEN (1U) //!< Bit position for USB_ERREN_CRC5EOFEN. +#define BM_USB_ERREN_CRC5EOFEN (0x02U) //!< Bit mask for USB_ERREN_CRC5EOFEN. +#define BS_USB_ERREN_CRC5EOFEN (1U) //!< Bit field size in bits for USB_ERREN_CRC5EOFEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERREN_CRC5EOFEN field. +#define BR_USB_ERREN_CRC5EOFEN (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_CRC5EOFEN)) +#endif + +//! @brief Format value for bitfield USB_ERREN_CRC5EOFEN. +#define BF_USB_ERREN_CRC5EOFEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERREN_CRC5EOFEN), uint8_t) & BM_USB_ERREN_CRC5EOFEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CRC5EOFEN field to a new value. +#define BW_USB_ERREN_CRC5EOFEN(v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_CRC5EOFEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERREN, field CRC16EN[2] (RW) + * + * Values: + * - 0 - Disables the CRC16 interrupt. + * - 1 - Enables the CRC16 interrupt. + */ +//@{ +#define BP_USB_ERREN_CRC16EN (2U) //!< Bit position for USB_ERREN_CRC16EN. +#define BM_USB_ERREN_CRC16EN (0x04U) //!< Bit mask for USB_ERREN_CRC16EN. +#define BS_USB_ERREN_CRC16EN (1U) //!< Bit field size in bits for USB_ERREN_CRC16EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERREN_CRC16EN field. +#define BR_USB_ERREN_CRC16EN (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_CRC16EN)) +#endif + +//! @brief Format value for bitfield USB_ERREN_CRC16EN. +#define BF_USB_ERREN_CRC16EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERREN_CRC16EN), uint8_t) & BM_USB_ERREN_CRC16EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CRC16EN field to a new value. +#define BW_USB_ERREN_CRC16EN(v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_CRC16EN) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERREN, field DFN8EN[3] (RW) + * + * Values: + * - 0 - Disables the DFN8 interrupt. + * - 1 - Enables the DFN8 interrupt. + */ +//@{ +#define BP_USB_ERREN_DFN8EN (3U) //!< Bit position for USB_ERREN_DFN8EN. +#define BM_USB_ERREN_DFN8EN (0x08U) //!< Bit mask for USB_ERREN_DFN8EN. +#define BS_USB_ERREN_DFN8EN (1U) //!< Bit field size in bits for USB_ERREN_DFN8EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERREN_DFN8EN field. +#define BR_USB_ERREN_DFN8EN (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_DFN8EN)) +#endif + +//! @brief Format value for bitfield USB_ERREN_DFN8EN. +#define BF_USB_ERREN_DFN8EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERREN_DFN8EN), uint8_t) & BM_USB_ERREN_DFN8EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DFN8EN field to a new value. +#define BW_USB_ERREN_DFN8EN(v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_DFN8EN) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERREN, field BTOERREN[4] (RW) + * + * Values: + * - 0 - Disables the BTOERR interrupt. + * - 1 - Enables the BTOERR interrupt. + */ +//@{ +#define BP_USB_ERREN_BTOERREN (4U) //!< Bit position for USB_ERREN_BTOERREN. +#define BM_USB_ERREN_BTOERREN (0x10U) //!< Bit mask for USB_ERREN_BTOERREN. +#define BS_USB_ERREN_BTOERREN (1U) //!< Bit field size in bits for USB_ERREN_BTOERREN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERREN_BTOERREN field. +#define BR_USB_ERREN_BTOERREN (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_BTOERREN)) +#endif + +//! @brief Format value for bitfield USB_ERREN_BTOERREN. +#define BF_USB_ERREN_BTOERREN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERREN_BTOERREN), uint8_t) & BM_USB_ERREN_BTOERREN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BTOERREN field to a new value. +#define BW_USB_ERREN_BTOERREN(v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_BTOERREN) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERREN, field DMAERREN[5] (RW) + * + * Values: + * - 0 - Disables the DMAERR interrupt. + * - 1 - Enables the DMAERR interrupt. + */ +//@{ +#define BP_USB_ERREN_DMAERREN (5U) //!< Bit position for USB_ERREN_DMAERREN. +#define BM_USB_ERREN_DMAERREN (0x20U) //!< Bit mask for USB_ERREN_DMAERREN. +#define BS_USB_ERREN_DMAERREN (1U) //!< Bit field size in bits for USB_ERREN_DMAERREN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERREN_DMAERREN field. +#define BR_USB_ERREN_DMAERREN (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_DMAERREN)) +#endif + +//! @brief Format value for bitfield USB_ERREN_DMAERREN. +#define BF_USB_ERREN_DMAERREN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERREN_DMAERREN), uint8_t) & BM_USB_ERREN_DMAERREN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DMAERREN field to a new value. +#define BW_USB_ERREN_DMAERREN(v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_DMAERREN) = (v)) +#endif +//@} + +/*! + * @name Register USB_ERREN, field BTSERREN[7] (RW) + * + * Values: + * - 0 - Disables the BTSERR interrupt. + * - 1 - Enables the BTSERR interrupt. + */ +//@{ +#define BP_USB_ERREN_BTSERREN (7U) //!< Bit position for USB_ERREN_BTSERREN. +#define BM_USB_ERREN_BTSERREN (0x80U) //!< Bit mask for USB_ERREN_BTSERREN. +#define BS_USB_ERREN_BTSERREN (1U) //!< Bit field size in bits for USB_ERREN_BTSERREN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ERREN_BTSERREN field. +#define BR_USB_ERREN_BTSERREN (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_BTSERREN)) +#endif + +//! @brief Format value for bitfield USB_ERREN_BTSERREN. +#define BF_USB_ERREN_BTSERREN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ERREN_BTSERREN), uint8_t) & BM_USB_ERREN_BTSERREN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BTSERREN field to a new value. +#define BW_USB_ERREN_BTSERREN(v) (BITBAND_ACCESS8(HW_USB_ERREN_ADDR, BP_USB_ERREN_BTSERREN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_STAT - Status register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_STAT - Status register (RO) + * + * Reset value: 0x00U + * + * Reports the transaction status within the USB module. When the processor's + * interrupt controller has received a TOKDNE, interrupt the Status Register must + * be read to determine the status of the previous endpoint communication. The + * data in the status register is valid when TOKDNE interrupt is asserted. The + * Status register is actually a read window into a status FIFO maintained by the USB + * module. When the USB module uses a BD, it updates the Status register. If + * another USB transaction is performed before the TOKDNE interrupt is serviced, the + * USB module stores the status of the next transaction in the STAT FIFO. Thus + * STAT is actually a four byte FIFO that allows the processor core to process one + * transaction while the SIE is processing the next transaction. Clearing the + * TOKDNE bit in the ISTAT register causes the SIE to update STAT with the contents + * of the next STAT value. If the data in the STAT holding register is valid, the + * SIE immediately reasserts to TOKDNE interrupt. + */ +typedef union _hw_usb_stat +{ + uint8_t U; + struct _hw_usb_stat_bitfields + { + uint8_t RESERVED0 : 2; //!< [1:0] + uint8_t ODD : 1; //!< [2] + uint8_t TX : 1; //!< [3] Transmit Indicator + uint8_t ENDP : 4; //!< [7:4] + } B; +} hw_usb_stat_t; +#endif + +/*! + * @name Constants and macros for entire USB_STAT register + */ +//@{ +#define HW_USB_STAT_ADDR (REGS_USB_BASE + 0x90U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_STAT (*(__I hw_usb_stat_t *) HW_USB_STAT_ADDR) +#define HW_USB_STAT_RD() (HW_USB_STAT.U) +#endif +//@} + +/* + * Constants & macros for individual USB_STAT bitfields + */ + +/*! + * @name Register USB_STAT, field ODD[2] (RO) + * + * This bit is set if the last buffer descriptor updated was in the odd bank of + * the BDT. + */ +//@{ +#define BP_USB_STAT_ODD (2U) //!< Bit position for USB_STAT_ODD. +#define BM_USB_STAT_ODD (0x04U) //!< Bit mask for USB_STAT_ODD. +#define BS_USB_STAT_ODD (1U) //!< Bit field size in bits for USB_STAT_ODD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_STAT_ODD field. +#define BR_USB_STAT_ODD (BITBAND_ACCESS8(HW_USB_STAT_ADDR, BP_USB_STAT_ODD)) +#endif +//@} + +/*! + * @name Register USB_STAT, field TX[3] (RO) + * + * Values: + * - 0 - The most recent transaction was a receive operation. + * - 1 - The most recent transaction was a transmit operation. + */ +//@{ +#define BP_USB_STAT_TX (3U) //!< Bit position for USB_STAT_TX. +#define BM_USB_STAT_TX (0x08U) //!< Bit mask for USB_STAT_TX. +#define BS_USB_STAT_TX (1U) //!< Bit field size in bits for USB_STAT_TX. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_STAT_TX field. +#define BR_USB_STAT_TX (BITBAND_ACCESS8(HW_USB_STAT_ADDR, BP_USB_STAT_TX)) +#endif +//@} + +/*! + * @name Register USB_STAT, field ENDP[7:4] (RO) + * + * This four-bit field encodes the endpoint address that received or transmitted + * the previous token. This allows the processor core to determine the BDT entry + * that was updated by the last USB transaction. + */ +//@{ +#define BP_USB_STAT_ENDP (4U) //!< Bit position for USB_STAT_ENDP. +#define BM_USB_STAT_ENDP (0xF0U) //!< Bit mask for USB_STAT_ENDP. +#define BS_USB_STAT_ENDP (4U) //!< Bit field size in bits for USB_STAT_ENDP. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_STAT_ENDP field. +#define BR_USB_STAT_ENDP (HW_USB_STAT.B.ENDP) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_CTL - Control register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_CTL - Control register (RW) + * + * Reset value: 0x00U + * + * Provides various control and configuration information for the USB module. + */ +typedef union _hw_usb_ctl +{ + uint8_t U; + struct _hw_usb_ctl_bitfields + { + uint8_t USBENSOFEN : 1; //!< [0] USB Enable + uint8_t ODDRST : 1; //!< [1] + uint8_t RESUME : 1; //!< [2] + uint8_t HOSTMODEEN : 1; //!< [3] + uint8_t RESET : 1; //!< [4] + uint8_t TXSUSPENDTOKENBUSY : 1; //!< [5] + uint8_t SE0 : 1; //!< [6] Live USB Single Ended Zero signal + uint8_t JSTATE : 1; //!< [7] Live USB differential receiver JSTATE + //! signal + } B; +} hw_usb_ctl_t; +#endif + +/*! + * @name Constants and macros for entire USB_CTL register + */ +//@{ +#define HW_USB_CTL_ADDR (REGS_USB_BASE + 0x94U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_CTL (*(__IO hw_usb_ctl_t *) HW_USB_CTL_ADDR) +#define HW_USB_CTL_RD() (HW_USB_CTL.U) +#define HW_USB_CTL_WR(v) (HW_USB_CTL.U = (v)) +#define HW_USB_CTL_SET(v) (HW_USB_CTL_WR(HW_USB_CTL_RD() | (v))) +#define HW_USB_CTL_CLR(v) (HW_USB_CTL_WR(HW_USB_CTL_RD() & ~(v))) +#define HW_USB_CTL_TOG(v) (HW_USB_CTL_WR(HW_USB_CTL_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_CTL bitfields + */ + +/*! + * @name Register USB_CTL, field USBENSOFEN[0] (RW) + * + * Setting this bit enables the USB-FS to operate; clearing it disables the + * USB-FS. Setting the bit causes the SIE to reset all of its ODD bits to the BDTs. + * Therefore, setting this bit resets much of the logic in the SIE. When host mode + * is enabled, clearing this bit causes the SIE to stop sending SOF tokens. + * + * Values: + * - 0 - Disables the USB Module. + * - 1 - Enables the USB Module. + */ +//@{ +#define BP_USB_CTL_USBENSOFEN (0U) //!< Bit position for USB_CTL_USBENSOFEN. +#define BM_USB_CTL_USBENSOFEN (0x01U) //!< Bit mask for USB_CTL_USBENSOFEN. +#define BS_USB_CTL_USBENSOFEN (1U) //!< Bit field size in bits for USB_CTL_USBENSOFEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CTL_USBENSOFEN field. +#define BR_USB_CTL_USBENSOFEN (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_USBENSOFEN)) +#endif + +//! @brief Format value for bitfield USB_CTL_USBENSOFEN. +#define BF_USB_CTL_USBENSOFEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CTL_USBENSOFEN), uint8_t) & BM_USB_CTL_USBENSOFEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the USBENSOFEN field to a new value. +#define BW_USB_CTL_USBENSOFEN(v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_USBENSOFEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_CTL, field ODDRST[1] (RW) + * + * Setting this bit to 1 resets all the BDT ODD ping/pong fields to 0, which + * then specifies the EVEN BDT bank. + */ +//@{ +#define BP_USB_CTL_ODDRST (1U) //!< Bit position for USB_CTL_ODDRST. +#define BM_USB_CTL_ODDRST (0x02U) //!< Bit mask for USB_CTL_ODDRST. +#define BS_USB_CTL_ODDRST (1U) //!< Bit field size in bits for USB_CTL_ODDRST. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CTL_ODDRST field. +#define BR_USB_CTL_ODDRST (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_ODDRST)) +#endif + +//! @brief Format value for bitfield USB_CTL_ODDRST. +#define BF_USB_CTL_ODDRST(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CTL_ODDRST), uint8_t) & BM_USB_CTL_ODDRST) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ODDRST field to a new value. +#define BW_USB_CTL_ODDRST(v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_ODDRST) = (v)) +#endif +//@} + +/*! + * @name Register USB_CTL, field RESUME[2] (RW) + * + * When set to 1 this bit enables the USB Module to execute resume signaling. + * This allows the USB Module to perform remote wake-up. Software must set RESUME + * to 1 for the required amount of time and then clear it to 0. If the HOSTMODEEN + * bit is set, the USB module appends a Low Speed End of Packet to the Resume + * signaling when the RESUME bit is cleared. For more information on RESUME + * signaling see Section 7.1.4.5 of the USB specification version 1.0. + */ +//@{ +#define BP_USB_CTL_RESUME (2U) //!< Bit position for USB_CTL_RESUME. +#define BM_USB_CTL_RESUME (0x04U) //!< Bit mask for USB_CTL_RESUME. +#define BS_USB_CTL_RESUME (1U) //!< Bit field size in bits for USB_CTL_RESUME. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CTL_RESUME field. +#define BR_USB_CTL_RESUME (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_RESUME)) +#endif + +//! @brief Format value for bitfield USB_CTL_RESUME. +#define BF_USB_CTL_RESUME(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CTL_RESUME), uint8_t) & BM_USB_CTL_RESUME) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the RESUME field to a new value. +#define BW_USB_CTL_RESUME(v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_RESUME) = (v)) +#endif +//@} + +/*! + * @name Register USB_CTL, field HOSTMODEEN[3] (RW) + * + * When set to 1, this bit enables the USB Module to operate in Host mode. In + * host mode, the USB module performs USB transactions under the programmed control + * of the host processor. + */ +//@{ +#define BP_USB_CTL_HOSTMODEEN (3U) //!< Bit position for USB_CTL_HOSTMODEEN. +#define BM_USB_CTL_HOSTMODEEN (0x08U) //!< Bit mask for USB_CTL_HOSTMODEEN. +#define BS_USB_CTL_HOSTMODEEN (1U) //!< Bit field size in bits for USB_CTL_HOSTMODEEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CTL_HOSTMODEEN field. +#define BR_USB_CTL_HOSTMODEEN (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_HOSTMODEEN)) +#endif + +//! @brief Format value for bitfield USB_CTL_HOSTMODEEN. +#define BF_USB_CTL_HOSTMODEEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CTL_HOSTMODEEN), uint8_t) & BM_USB_CTL_HOSTMODEEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HOSTMODEEN field to a new value. +#define BW_USB_CTL_HOSTMODEEN(v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_HOSTMODEEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_CTL, field RESET[4] (RW) + * + * Setting this bit enables the USB Module to generate USB reset signaling. This + * allows the USB Module to reset USB peripherals. This control signal is only + * valid in Host mode (HOSTMODEEN=1). Software must set RESET to 1 for the + * required amount of time and then clear it to 0 to end reset signaling. For more + * information on reset signaling see Section 7.1.4.3 of the USB specification version + * 1.0. + */ +//@{ +#define BP_USB_CTL_RESET (4U) //!< Bit position for USB_CTL_RESET. +#define BM_USB_CTL_RESET (0x10U) //!< Bit mask for USB_CTL_RESET. +#define BS_USB_CTL_RESET (1U) //!< Bit field size in bits for USB_CTL_RESET. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CTL_RESET field. +#define BR_USB_CTL_RESET (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_RESET)) +#endif + +//! @brief Format value for bitfield USB_CTL_RESET. +#define BF_USB_CTL_RESET(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CTL_RESET), uint8_t) & BM_USB_CTL_RESET) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the RESET field to a new value. +#define BW_USB_CTL_RESET(v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_RESET) = (v)) +#endif +//@} + +/*! + * @name Register USB_CTL, field TXSUSPENDTOKENBUSY[5] (RW) + * + * In Host mode, TOKEN_BUSY is set when the USB module is busy executing a USB + * token. Software must not write more token commands to the Token Register when + * TOKEN_BUSY is set. Software should check this field before writing any tokens + * to the Token Register to ensure that token commands are not lost. In Target + * mode, TXD_SUSPEND is set when the SIE has disabled packet transmission and + * reception. Clearing this bit allows the SIE to continue token processing. This bit + * is set by the SIE when a SETUP Token is received allowing software to dequeue + * any pending packet transactions in the BDT before resuming token processing. + */ +//@{ +#define BP_USB_CTL_TXSUSPENDTOKENBUSY (5U) //!< Bit position for USB_CTL_TXSUSPENDTOKENBUSY. +#define BM_USB_CTL_TXSUSPENDTOKENBUSY (0x20U) //!< Bit mask for USB_CTL_TXSUSPENDTOKENBUSY. +#define BS_USB_CTL_TXSUSPENDTOKENBUSY (1U) //!< Bit field size in bits for USB_CTL_TXSUSPENDTOKENBUSY. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CTL_TXSUSPENDTOKENBUSY field. +#define BR_USB_CTL_TXSUSPENDTOKENBUSY (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_TXSUSPENDTOKENBUSY)) +#endif + +//! @brief Format value for bitfield USB_CTL_TXSUSPENDTOKENBUSY. +#define BF_USB_CTL_TXSUSPENDTOKENBUSY(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CTL_TXSUSPENDTOKENBUSY), uint8_t) & BM_USB_CTL_TXSUSPENDTOKENBUSY) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TXSUSPENDTOKENBUSY field to a new value. +#define BW_USB_CTL_TXSUSPENDTOKENBUSY(v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_TXSUSPENDTOKENBUSY) = (v)) +#endif +//@} + +/*! + * @name Register USB_CTL, field SE0[6] (RW) + */ +//@{ +#define BP_USB_CTL_SE0 (6U) //!< Bit position for USB_CTL_SE0. +#define BM_USB_CTL_SE0 (0x40U) //!< Bit mask for USB_CTL_SE0. +#define BS_USB_CTL_SE0 (1U) //!< Bit field size in bits for USB_CTL_SE0. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CTL_SE0 field. +#define BR_USB_CTL_SE0 (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_SE0)) +#endif + +//! @brief Format value for bitfield USB_CTL_SE0. +#define BF_USB_CTL_SE0(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CTL_SE0), uint8_t) & BM_USB_CTL_SE0) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SE0 field to a new value. +#define BW_USB_CTL_SE0(v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_SE0) = (v)) +#endif +//@} + +/*! + * @name Register USB_CTL, field JSTATE[7] (RW) + * + * The polarity of this signal is affected by the current state of LSEN . + */ +//@{ +#define BP_USB_CTL_JSTATE (7U) //!< Bit position for USB_CTL_JSTATE. +#define BM_USB_CTL_JSTATE (0x80U) //!< Bit mask for USB_CTL_JSTATE. +#define BS_USB_CTL_JSTATE (1U) //!< Bit field size in bits for USB_CTL_JSTATE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CTL_JSTATE field. +#define BR_USB_CTL_JSTATE (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_JSTATE)) +#endif + +//! @brief Format value for bitfield USB_CTL_JSTATE. +#define BF_USB_CTL_JSTATE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CTL_JSTATE), uint8_t) & BM_USB_CTL_JSTATE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the JSTATE field to a new value. +#define BW_USB_CTL_JSTATE(v) (BITBAND_ACCESS8(HW_USB_CTL_ADDR, BP_USB_CTL_JSTATE) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_ADDR - Address register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_ADDR - Address register (RW) + * + * Reset value: 0x00U + * + * Holds the unique USB address that the USB module decodes when in Peripheral + * mode (HOSTMODEEN=0). When operating in Host mode (HOSTMODEEN=1) the USB module + * transmits this address with a TOKEN packet. This enables the USB module to + * uniquely address any USB peripheral. In either mode, CTL[USBENSOFEN] must be 1. + * The Address register is reset to 0x00 after the reset input becomes active or + * the USB module decodes a USB reset signal. This action initializes the Address + * register to decode address 0x00 as required by the USB specification. + */ +typedef union _hw_usb_addr +{ + uint8_t U; + struct _hw_usb_addr_bitfields + { + uint8_t ADDR : 7; //!< [6:0] USB Address + uint8_t LSEN : 1; //!< [7] Low Speed Enable bit + } B; +} hw_usb_addr_t; +#endif + +/*! + * @name Constants and macros for entire USB_ADDR register + */ +//@{ +#define HW_USB_ADDR_ADDR (REGS_USB_BASE + 0x98U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_ADDR (*(__IO hw_usb_addr_t *) HW_USB_ADDR_ADDR) +#define HW_USB_ADDR_RD() (HW_USB_ADDR.U) +#define HW_USB_ADDR_WR(v) (HW_USB_ADDR.U = (v)) +#define HW_USB_ADDR_SET(v) (HW_USB_ADDR_WR(HW_USB_ADDR_RD() | (v))) +#define HW_USB_ADDR_CLR(v) (HW_USB_ADDR_WR(HW_USB_ADDR_RD() & ~(v))) +#define HW_USB_ADDR_TOG(v) (HW_USB_ADDR_WR(HW_USB_ADDR_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_ADDR bitfields + */ + +/*! + * @name Register USB_ADDR, field ADDR[6:0] (RW) + * + * Defines the USB address that the USB module decodes in peripheral mode, or + * transmits when in host mode. + */ +//@{ +#define BP_USB_ADDR_ADDR (0U) //!< Bit position for USB_ADDR_ADDR. +#define BM_USB_ADDR_ADDR (0x7FU) //!< Bit mask for USB_ADDR_ADDR. +#define BS_USB_ADDR_ADDR (7U) //!< Bit field size in bits for USB_ADDR_ADDR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ADDR_ADDR field. +#define BR_USB_ADDR_ADDR (HW_USB_ADDR.B.ADDR) +#endif + +//! @brief Format value for bitfield USB_ADDR_ADDR. +#define BF_USB_ADDR_ADDR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ADDR_ADDR), uint8_t) & BM_USB_ADDR_ADDR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ADDR field to a new value. +#define BW_USB_ADDR_ADDR(v) (HW_USB_ADDR_WR((HW_USB_ADDR_RD() & ~BM_USB_ADDR_ADDR) | BF_USB_ADDR_ADDR(v))) +#endif +//@} + +/*! + * @name Register USB_ADDR, field LSEN[7] (RW) + * + * Informs the USB module that the next token command written to the token + * register must be performed at low speed. This enables the USB module to perform the + * necessary preamble required for low-speed data transmissions. + */ +//@{ +#define BP_USB_ADDR_LSEN (7U) //!< Bit position for USB_ADDR_LSEN. +#define BM_USB_ADDR_LSEN (0x80U) //!< Bit mask for USB_ADDR_LSEN. +#define BS_USB_ADDR_LSEN (1U) //!< Bit field size in bits for USB_ADDR_LSEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ADDR_LSEN field. +#define BR_USB_ADDR_LSEN (BITBAND_ACCESS8(HW_USB_ADDR_ADDR, BP_USB_ADDR_LSEN)) +#endif + +//! @brief Format value for bitfield USB_ADDR_LSEN. +#define BF_USB_ADDR_LSEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ADDR_LSEN), uint8_t) & BM_USB_ADDR_LSEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the LSEN field to a new value. +#define BW_USB_ADDR_LSEN(v) (BITBAND_ACCESS8(HW_USB_ADDR_ADDR, BP_USB_ADDR_LSEN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_BDTPAGE1 - BDT Page register 1 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_BDTPAGE1 - BDT Page register 1 (RW) + * + * Reset value: 0x00U + * + * Provides address bits 15 through 9 of the base address where the current + * Buffer Descriptor Table (BDT) resides in system memory. See Buffer Descriptor + * Table. The 32-bit BDT Base Address is always aligned on 512-byte boundaries, so + * bits 8 through 0 of the base address are always zero. + */ +typedef union _hw_usb_bdtpage1 +{ + uint8_t U; + struct _hw_usb_bdtpage1_bitfields + { + uint8_t RESERVED0 : 1; //!< [0] + uint8_t BDTBA : 7; //!< [7:1] + } B; +} hw_usb_bdtpage1_t; +#endif + +/*! + * @name Constants and macros for entire USB_BDTPAGE1 register + */ +//@{ +#define HW_USB_BDTPAGE1_ADDR (REGS_USB_BASE + 0x9CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_BDTPAGE1 (*(__IO hw_usb_bdtpage1_t *) HW_USB_BDTPAGE1_ADDR) +#define HW_USB_BDTPAGE1_RD() (HW_USB_BDTPAGE1.U) +#define HW_USB_BDTPAGE1_WR(v) (HW_USB_BDTPAGE1.U = (v)) +#define HW_USB_BDTPAGE1_SET(v) (HW_USB_BDTPAGE1_WR(HW_USB_BDTPAGE1_RD() | (v))) +#define HW_USB_BDTPAGE1_CLR(v) (HW_USB_BDTPAGE1_WR(HW_USB_BDTPAGE1_RD() & ~(v))) +#define HW_USB_BDTPAGE1_TOG(v) (HW_USB_BDTPAGE1_WR(HW_USB_BDTPAGE1_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_BDTPAGE1 bitfields + */ + +/*! + * @name Register USB_BDTPAGE1, field BDTBA[7:1] (RW) + * + * Provides address bits 15 through 9 of the BDT base address. + */ +//@{ +#define BP_USB_BDTPAGE1_BDTBA (1U) //!< Bit position for USB_BDTPAGE1_BDTBA. +#define BM_USB_BDTPAGE1_BDTBA (0xFEU) //!< Bit mask for USB_BDTPAGE1_BDTBA. +#define BS_USB_BDTPAGE1_BDTBA (7U) //!< Bit field size in bits for USB_BDTPAGE1_BDTBA. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_BDTPAGE1_BDTBA field. +#define BR_USB_BDTPAGE1_BDTBA (HW_USB_BDTPAGE1.B.BDTBA) +#endif + +//! @brief Format value for bitfield USB_BDTPAGE1_BDTBA. +#define BF_USB_BDTPAGE1_BDTBA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_BDTPAGE1_BDTBA), uint8_t) & BM_USB_BDTPAGE1_BDTBA) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BDTBA field to a new value. +#define BW_USB_BDTPAGE1_BDTBA(v) (HW_USB_BDTPAGE1_WR((HW_USB_BDTPAGE1_RD() & ~BM_USB_BDTPAGE1_BDTBA) | BF_USB_BDTPAGE1_BDTBA(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_FRMNUML - Frame Number register Low +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_FRMNUML - Frame Number register Low (RW) + * + * Reset value: 0x00U + * + * The Frame Number registers (low and high) contain the 11-bit frame number. + * These registers are updated with the current frame number whenever a SOF TOKEN + * is received. + */ +typedef union _hw_usb_frmnuml +{ + uint8_t U; + struct _hw_usb_frmnuml_bitfields + { + uint8_t FRM : 8; //!< [7:0] + } B; +} hw_usb_frmnuml_t; +#endif + +/*! + * @name Constants and macros for entire USB_FRMNUML register + */ +//@{ +#define HW_USB_FRMNUML_ADDR (REGS_USB_BASE + 0xA0U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_FRMNUML (*(__IO hw_usb_frmnuml_t *) HW_USB_FRMNUML_ADDR) +#define HW_USB_FRMNUML_RD() (HW_USB_FRMNUML.U) +#define HW_USB_FRMNUML_WR(v) (HW_USB_FRMNUML.U = (v)) +#define HW_USB_FRMNUML_SET(v) (HW_USB_FRMNUML_WR(HW_USB_FRMNUML_RD() | (v))) +#define HW_USB_FRMNUML_CLR(v) (HW_USB_FRMNUML_WR(HW_USB_FRMNUML_RD() & ~(v))) +#define HW_USB_FRMNUML_TOG(v) (HW_USB_FRMNUML_WR(HW_USB_FRMNUML_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_FRMNUML bitfields + */ + +/*! + * @name Register USB_FRMNUML, field FRM[7:0] (RW) + * + * This 8-bit field and the 3-bit field in the Frame Number Register High are + * used to compute the address where the current Buffer Descriptor Table (BDT) + * resides in system memory. + */ +//@{ +#define BP_USB_FRMNUML_FRM (0U) //!< Bit position for USB_FRMNUML_FRM. +#define BM_USB_FRMNUML_FRM (0xFFU) //!< Bit mask for USB_FRMNUML_FRM. +#define BS_USB_FRMNUML_FRM (8U) //!< Bit field size in bits for USB_FRMNUML_FRM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_FRMNUML_FRM field. +#define BR_USB_FRMNUML_FRM (HW_USB_FRMNUML.U) +#endif + +//! @brief Format value for bitfield USB_FRMNUML_FRM. +#define BF_USB_FRMNUML_FRM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_FRMNUML_FRM), uint8_t) & BM_USB_FRMNUML_FRM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FRM field to a new value. +#define BW_USB_FRMNUML_FRM(v) (HW_USB_FRMNUML_WR(v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_FRMNUMH - Frame Number register High +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_FRMNUMH - Frame Number register High (RW) + * + * Reset value: 0x00U + * + * The Frame Number registers (low and high) contain the 11-bit frame number. + * These registers are updated with the current frame number whenever a SOF TOKEN + * is received. + */ +typedef union _hw_usb_frmnumh +{ + uint8_t U; + struct _hw_usb_frmnumh_bitfields + { + uint8_t FRM : 3; //!< [2:0] + uint8_t RESERVED0 : 5; //!< [7:3] + } B; +} hw_usb_frmnumh_t; +#endif + +/*! + * @name Constants and macros for entire USB_FRMNUMH register + */ +//@{ +#define HW_USB_FRMNUMH_ADDR (REGS_USB_BASE + 0xA4U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_FRMNUMH (*(__IO hw_usb_frmnumh_t *) HW_USB_FRMNUMH_ADDR) +#define HW_USB_FRMNUMH_RD() (HW_USB_FRMNUMH.U) +#define HW_USB_FRMNUMH_WR(v) (HW_USB_FRMNUMH.U = (v)) +#define HW_USB_FRMNUMH_SET(v) (HW_USB_FRMNUMH_WR(HW_USB_FRMNUMH_RD() | (v))) +#define HW_USB_FRMNUMH_CLR(v) (HW_USB_FRMNUMH_WR(HW_USB_FRMNUMH_RD() & ~(v))) +#define HW_USB_FRMNUMH_TOG(v) (HW_USB_FRMNUMH_WR(HW_USB_FRMNUMH_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_FRMNUMH bitfields + */ + +/*! + * @name Register USB_FRMNUMH, field FRM[2:0] (RW) + * + * This 3-bit field and the 8-bit field in the Frame Number Register Low are + * used to compute the address where the current Buffer Descriptor Table (BDT) + * resides in system memory. + */ +//@{ +#define BP_USB_FRMNUMH_FRM (0U) //!< Bit position for USB_FRMNUMH_FRM. +#define BM_USB_FRMNUMH_FRM (0x07U) //!< Bit mask for USB_FRMNUMH_FRM. +#define BS_USB_FRMNUMH_FRM (3U) //!< Bit field size in bits for USB_FRMNUMH_FRM. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_FRMNUMH_FRM field. +#define BR_USB_FRMNUMH_FRM (HW_USB_FRMNUMH.B.FRM) +#endif + +//! @brief Format value for bitfield USB_FRMNUMH_FRM. +#define BF_USB_FRMNUMH_FRM(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_FRMNUMH_FRM), uint8_t) & BM_USB_FRMNUMH_FRM) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the FRM field to a new value. +#define BW_USB_FRMNUMH_FRM(v) (HW_USB_FRMNUMH_WR((HW_USB_FRMNUMH_RD() & ~BM_USB_FRMNUMH_FRM) | BF_USB_FRMNUMH_FRM(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_TOKEN - Token register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_TOKEN - Token register (RW) + * + * Reset value: 0x00U + * + * Used to initiate USB transactions when in host mode (HOSTMODEEN=1). When the + * software needs to execute a USB transaction to a peripheral, it writes the + * TOKEN type and endpoint to this register. After this register has been written, + * the USB module begins the specified USB transaction to the address contained in + * the address register. The processor core must always check that the + * TOKEN_BUSY bit in the control register is not 1 before writing to the Token Register. + * This ensures that the token commands are not overwritten before they can be + * executed. The address register and endpoint control register 0 are also used when + * performing a token command and therefore must also be written before the + * Token Register. The address register is used to select the USB peripheral address + * transmitted by the token command. The endpoint control register determines the + * handshake and retry policies used during the transfer. + */ +typedef union _hw_usb_token +{ + uint8_t U; + struct _hw_usb_token_bitfields + { + uint8_t TOKENENDPT : 4; //!< [3:0] + uint8_t TOKENPID : 4; //!< [7:4] + } B; +} hw_usb_token_t; +#endif + +/*! + * @name Constants and macros for entire USB_TOKEN register + */ +//@{ +#define HW_USB_TOKEN_ADDR (REGS_USB_BASE + 0xA8U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_TOKEN (*(__IO hw_usb_token_t *) HW_USB_TOKEN_ADDR) +#define HW_USB_TOKEN_RD() (HW_USB_TOKEN.U) +#define HW_USB_TOKEN_WR(v) (HW_USB_TOKEN.U = (v)) +#define HW_USB_TOKEN_SET(v) (HW_USB_TOKEN_WR(HW_USB_TOKEN_RD() | (v))) +#define HW_USB_TOKEN_CLR(v) (HW_USB_TOKEN_WR(HW_USB_TOKEN_RD() & ~(v))) +#define HW_USB_TOKEN_TOG(v) (HW_USB_TOKEN_WR(HW_USB_TOKEN_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_TOKEN bitfields + */ + +/*! + * @name Register USB_TOKEN, field TOKENENDPT[3:0] (RW) + * + * Holds the Endpoint address for the token command. The four bit value written + * must be a valid endpoint. + */ +//@{ +#define BP_USB_TOKEN_TOKENENDPT (0U) //!< Bit position for USB_TOKEN_TOKENENDPT. +#define BM_USB_TOKEN_TOKENENDPT (0x0FU) //!< Bit mask for USB_TOKEN_TOKENENDPT. +#define BS_USB_TOKEN_TOKENENDPT (4U) //!< Bit field size in bits for USB_TOKEN_TOKENENDPT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_TOKEN_TOKENENDPT field. +#define BR_USB_TOKEN_TOKENENDPT (HW_USB_TOKEN.B.TOKENENDPT) +#endif + +//! @brief Format value for bitfield USB_TOKEN_TOKENENDPT. +#define BF_USB_TOKEN_TOKENENDPT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_TOKEN_TOKENENDPT), uint8_t) & BM_USB_TOKEN_TOKENENDPT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TOKENENDPT field to a new value. +#define BW_USB_TOKEN_TOKENENDPT(v) (HW_USB_TOKEN_WR((HW_USB_TOKEN_RD() & ~BM_USB_TOKEN_TOKENENDPT) | BF_USB_TOKEN_TOKENENDPT(v))) +#endif +//@} + +/*! + * @name Register USB_TOKEN, field TOKENPID[7:4] (RW) + * + * Contains the token type executed by the USB module. + * + * Values: + * - 0001 - OUT Token. USB Module performs an OUT (TX) transaction. + * - 1001 - IN Token. USB Module performs an In (RX) transaction. + * - 1101 - SETUP Token. USB Module performs a SETUP (TX) transaction + */ +//@{ +#define BP_USB_TOKEN_TOKENPID (4U) //!< Bit position for USB_TOKEN_TOKENPID. +#define BM_USB_TOKEN_TOKENPID (0xF0U) //!< Bit mask for USB_TOKEN_TOKENPID. +#define BS_USB_TOKEN_TOKENPID (4U) //!< Bit field size in bits for USB_TOKEN_TOKENPID. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_TOKEN_TOKENPID field. +#define BR_USB_TOKEN_TOKENPID (HW_USB_TOKEN.B.TOKENPID) +#endif + +//! @brief Format value for bitfield USB_TOKEN_TOKENPID. +#define BF_USB_TOKEN_TOKENPID(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_TOKEN_TOKENPID), uint8_t) & BM_USB_TOKEN_TOKENPID) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the TOKENPID field to a new value. +#define BW_USB_TOKEN_TOKENPID(v) (HW_USB_TOKEN_WR((HW_USB_TOKEN_RD() & ~BM_USB_TOKEN_TOKENPID) | BF_USB_TOKEN_TOKENPID(v))) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_SOFTHLD - SOF Threshold register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_SOFTHLD - SOF Threshold register (RW) + * + * Reset value: 0x00U + * + * The SOF Threshold Register is used only in Host mode (HOSTMODEEN=1). When in + * Host mode, the 14-bit SOF counter counts the interval between SOF frames. The + * SOF must be transmitted every 1ms so therefore the SOF counter is loaded with + * a value of 12000. When the SOF counter reaches zero, a Start Of Frame (SOF) + * token is transmitted. The SOF threshold register is used to program the number + * of USB byte times before the SOF to stop initiating token packet transactions. + * This register must be set to a value that ensures that other packets are not + * actively being transmitted when the SOF time counts to zero. When the SOF + * counter reaches the threshold value, no more tokens are transmitted until after the + * SOF has been transmitted. The value programmed into the threshold register + * must reserve enough time to ensure the worst case transaction completes. In + * general the worst case transaction is an IN token followed by a data packet from + * the target followed by the response from the host. The actual time required is + * a function of the maximum packet size on the bus. Typical values for the SOF + * threshold are: 64-byte packets=74; 32-byte packets=42; 16-byte packets=26; + * 8-byte packets=18. + */ +typedef union _hw_usb_softhld +{ + uint8_t U; + struct _hw_usb_softhld_bitfields + { + uint8_t CNT : 8; //!< [7:0] + } B; +} hw_usb_softhld_t; +#endif + +/*! + * @name Constants and macros for entire USB_SOFTHLD register + */ +//@{ +#define HW_USB_SOFTHLD_ADDR (REGS_USB_BASE + 0xACU) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_SOFTHLD (*(__IO hw_usb_softhld_t *) HW_USB_SOFTHLD_ADDR) +#define HW_USB_SOFTHLD_RD() (HW_USB_SOFTHLD.U) +#define HW_USB_SOFTHLD_WR(v) (HW_USB_SOFTHLD.U = (v)) +#define HW_USB_SOFTHLD_SET(v) (HW_USB_SOFTHLD_WR(HW_USB_SOFTHLD_RD() | (v))) +#define HW_USB_SOFTHLD_CLR(v) (HW_USB_SOFTHLD_WR(HW_USB_SOFTHLD_RD() & ~(v))) +#define HW_USB_SOFTHLD_TOG(v) (HW_USB_SOFTHLD_WR(HW_USB_SOFTHLD_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_SOFTHLD bitfields + */ + +/*! + * @name Register USB_SOFTHLD, field CNT[7:0] (RW) + * + * Represents the SOF count threshold in byte times. + */ +//@{ +#define BP_USB_SOFTHLD_CNT (0U) //!< Bit position for USB_SOFTHLD_CNT. +#define BM_USB_SOFTHLD_CNT (0xFFU) //!< Bit mask for USB_SOFTHLD_CNT. +#define BS_USB_SOFTHLD_CNT (8U) //!< Bit field size in bits for USB_SOFTHLD_CNT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_SOFTHLD_CNT field. +#define BR_USB_SOFTHLD_CNT (HW_USB_SOFTHLD.U) +#endif + +//! @brief Format value for bitfield USB_SOFTHLD_CNT. +#define BF_USB_SOFTHLD_CNT(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_SOFTHLD_CNT), uint8_t) & BM_USB_SOFTHLD_CNT) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CNT field to a new value. +#define BW_USB_SOFTHLD_CNT(v) (HW_USB_SOFTHLD_WR(v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_BDTPAGE2 - BDT Page Register 2 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_BDTPAGE2 - BDT Page Register 2 (RW) + * + * Reset value: 0x00U + * + * Contains an 8-bit value used to compute the address where the current Buffer + * Descriptor Table (BDT) resides in system memory. See Buffer Descriptor Table. + */ +typedef union _hw_usb_bdtpage2 +{ + uint8_t U; + struct _hw_usb_bdtpage2_bitfields + { + uint8_t BDTBA : 8; //!< [7:0] + } B; +} hw_usb_bdtpage2_t; +#endif + +/*! + * @name Constants and macros for entire USB_BDTPAGE2 register + */ +//@{ +#define HW_USB_BDTPAGE2_ADDR (REGS_USB_BASE + 0xB0U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_BDTPAGE2 (*(__IO hw_usb_bdtpage2_t *) HW_USB_BDTPAGE2_ADDR) +#define HW_USB_BDTPAGE2_RD() (HW_USB_BDTPAGE2.U) +#define HW_USB_BDTPAGE2_WR(v) (HW_USB_BDTPAGE2.U = (v)) +#define HW_USB_BDTPAGE2_SET(v) (HW_USB_BDTPAGE2_WR(HW_USB_BDTPAGE2_RD() | (v))) +#define HW_USB_BDTPAGE2_CLR(v) (HW_USB_BDTPAGE2_WR(HW_USB_BDTPAGE2_RD() & ~(v))) +#define HW_USB_BDTPAGE2_TOG(v) (HW_USB_BDTPAGE2_WR(HW_USB_BDTPAGE2_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_BDTPAGE2 bitfields + */ + +/*! + * @name Register USB_BDTPAGE2, field BDTBA[7:0] (RW) + * + * Provides address bits 23 through 16 of the BDT base address that defines the + * location of Buffer Descriptor Table resides in system memory. + */ +//@{ +#define BP_USB_BDTPAGE2_BDTBA (0U) //!< Bit position for USB_BDTPAGE2_BDTBA. +#define BM_USB_BDTPAGE2_BDTBA (0xFFU) //!< Bit mask for USB_BDTPAGE2_BDTBA. +#define BS_USB_BDTPAGE2_BDTBA (8U) //!< Bit field size in bits for USB_BDTPAGE2_BDTBA. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_BDTPAGE2_BDTBA field. +#define BR_USB_BDTPAGE2_BDTBA (HW_USB_BDTPAGE2.U) +#endif + +//! @brief Format value for bitfield USB_BDTPAGE2_BDTBA. +#define BF_USB_BDTPAGE2_BDTBA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_BDTPAGE2_BDTBA), uint8_t) & BM_USB_BDTPAGE2_BDTBA) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BDTBA field to a new value. +#define BW_USB_BDTPAGE2_BDTBA(v) (HW_USB_BDTPAGE2_WR(v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_BDTPAGE3 - BDT Page Register 3 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_BDTPAGE3 - BDT Page Register 3 (RW) + * + * Reset value: 0x00U + * + * Contains an 8-bit value used to compute the address where the current Buffer + * Descriptor Table (BDT) resides in system memory. See Buffer Descriptor Table. + */ +typedef union _hw_usb_bdtpage3 +{ + uint8_t U; + struct _hw_usb_bdtpage3_bitfields + { + uint8_t BDTBA : 8; //!< [7:0] + } B; +} hw_usb_bdtpage3_t; +#endif + +/*! + * @name Constants and macros for entire USB_BDTPAGE3 register + */ +//@{ +#define HW_USB_BDTPAGE3_ADDR (REGS_USB_BASE + 0xB4U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_BDTPAGE3 (*(__IO hw_usb_bdtpage3_t *) HW_USB_BDTPAGE3_ADDR) +#define HW_USB_BDTPAGE3_RD() (HW_USB_BDTPAGE3.U) +#define HW_USB_BDTPAGE3_WR(v) (HW_USB_BDTPAGE3.U = (v)) +#define HW_USB_BDTPAGE3_SET(v) (HW_USB_BDTPAGE3_WR(HW_USB_BDTPAGE3_RD() | (v))) +#define HW_USB_BDTPAGE3_CLR(v) (HW_USB_BDTPAGE3_WR(HW_USB_BDTPAGE3_RD() & ~(v))) +#define HW_USB_BDTPAGE3_TOG(v) (HW_USB_BDTPAGE3_WR(HW_USB_BDTPAGE3_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_BDTPAGE3 bitfields + */ + +/*! + * @name Register USB_BDTPAGE3, field BDTBA[7:0] (RW) + * + * Provides address bits 31 through 24 of the BDT base address that defines the + * location of Buffer Descriptor Table resides in system memory. + */ +//@{ +#define BP_USB_BDTPAGE3_BDTBA (0U) //!< Bit position for USB_BDTPAGE3_BDTBA. +#define BM_USB_BDTPAGE3_BDTBA (0xFFU) //!< Bit mask for USB_BDTPAGE3_BDTBA. +#define BS_USB_BDTPAGE3_BDTBA (8U) //!< Bit field size in bits for USB_BDTPAGE3_BDTBA. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_BDTPAGE3_BDTBA field. +#define BR_USB_BDTPAGE3_BDTBA (HW_USB_BDTPAGE3.U) +#endif + +//! @brief Format value for bitfield USB_BDTPAGE3_BDTBA. +#define BF_USB_BDTPAGE3_BDTBA(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_BDTPAGE3_BDTBA), uint8_t) & BM_USB_BDTPAGE3_BDTBA) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the BDTBA field to a new value. +#define BW_USB_BDTPAGE3_BDTBA(v) (HW_USB_BDTPAGE3_WR(v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_ENDPTn - Endpoint Control register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_ENDPTn - Endpoint Control register (RW) + * + * Reset value: 0x00U + * + * Contains the endpoint control bits for each of the 16 endpoints available + * within the USB module for a decoded address. The format for these registers is + * shown in the following figure. Endpoint 0 (ENDPT0) is associated with control + * pipe 0, which is required for all USB functions. Therefore, after a USBRST + * interrupt occurs the processor core should set ENDPT0 to contain 0x0D. In Host mode + * ENDPT0 is used to determine the handshake, retry and low speed + * characteristics of the host transfer. For Control, Bulk and Interrupt transfers, the EPHSHK + * bit should be 1. For Isochronous transfers it should be 0. Common values to + * use for ENDPT0 in host mode are 0x4D for Control, Bulk, and Interrupt transfers, + * and 0x4C for Isochronous transfers. The three bits EPCTLDIS, EPRXEN, and + * EPTXEN define if an endpoint is enabled and define the direction of the endpoint. + * The endpoint enable/direction control is defined in the following table. + * Endpoint enable and direction control EPCTLDIS EPRXEN EPTXEN Endpoint + * enable/direction control X 0 0 Disable endpoint X 0 1 Enable endpoint for Tx transfers only + * X 1 0 Enable endpoint for Rx transfers only 1 1 1 Enable endpoint for Rx and + * Tx transfers 0 1 1 Enable Endpoint for RX and TX as well as control (SETUP) + * transfers. + */ +typedef union _hw_usb_endptn +{ + uint8_t U; + struct _hw_usb_endptn_bitfields + { + uint8_t EPHSHK : 1; //!< [0] + uint8_t EPSTALL : 1; //!< [1] + uint8_t EPTXEN : 1; //!< [2] + uint8_t EPRXEN : 1; //!< [3] + uint8_t EPCTLDIS : 1; //!< [4] + uint8_t RESERVED0 : 1; //!< [5] + uint8_t RETRYDIS : 1; //!< [6] + uint8_t HOSTWOHUB : 1; //!< [7] + } B; +} hw_usb_endptn_t; +#endif + +/*! + * @name Constants and macros for entire USB_ENDPTn register + */ +//@{ +#define HW_USB_ENDPTn_COUNT (16U) + +#define HW_USB_ENDPTn_ADDR(n) (REGS_USB_BASE + 0xC0U + (0x4U * n)) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_ENDPTn(n) (*(__IO hw_usb_endptn_t *) HW_USB_ENDPTn_ADDR(n)) +#define HW_USB_ENDPTn_RD(n) (HW_USB_ENDPTn(n).U) +#define HW_USB_ENDPTn_WR(n, v) (HW_USB_ENDPTn(n).U = (v)) +#define HW_USB_ENDPTn_SET(n, v) (HW_USB_ENDPTn_WR(n, HW_USB_ENDPTn_RD(n) | (v))) +#define HW_USB_ENDPTn_CLR(n, v) (HW_USB_ENDPTn_WR(n, HW_USB_ENDPTn_RD(n) & ~(v))) +#define HW_USB_ENDPTn_TOG(n, v) (HW_USB_ENDPTn_WR(n, HW_USB_ENDPTn_RD(n) ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_ENDPTn bitfields + */ + +/*! + * @name Register USB_ENDPTn, field EPHSHK[0] (RW) + * + * When set this bit enables an endpoint to perform handshaking during a + * transaction to this endpoint. This bit is generally 1 unless the endpoint is + * Isochronous. + */ +//@{ +#define BP_USB_ENDPTn_EPHSHK (0U) //!< Bit position for USB_ENDPTn_EPHSHK. +#define BM_USB_ENDPTn_EPHSHK (0x01U) //!< Bit mask for USB_ENDPTn_EPHSHK. +#define BS_USB_ENDPTn_EPHSHK (1U) //!< Bit field size in bits for USB_ENDPTn_EPHSHK. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ENDPTn_EPHSHK field. +#define BR_USB_ENDPTn_EPHSHK(n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPHSHK)) +#endif + +//! @brief Format value for bitfield USB_ENDPTn_EPHSHK. +#define BF_USB_ENDPTn_EPHSHK(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ENDPTn_EPHSHK), uint8_t) & BM_USB_ENDPTn_EPHSHK) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the EPHSHK field to a new value. +#define BW_USB_ENDPTn_EPHSHK(n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPHSHK) = (v)) +#endif +//@} + +/*! + * @name Register USB_ENDPTn, field EPSTALL[1] (RW) + * + * When set this bit indicates that the endpoint is called. This bit has + * priority over all other control bits in the EndPoint Enable Register, but it is only + * valid if EPTXEN=1 or EPRXEN=1. Any access to this endpoint causes the USB + * Module to return a STALL handshake. After an endpoint is stalled it requires + * intervention from the Host Controller. + */ +//@{ +#define BP_USB_ENDPTn_EPSTALL (1U) //!< Bit position for USB_ENDPTn_EPSTALL. +#define BM_USB_ENDPTn_EPSTALL (0x02U) //!< Bit mask for USB_ENDPTn_EPSTALL. +#define BS_USB_ENDPTn_EPSTALL (1U) //!< Bit field size in bits for USB_ENDPTn_EPSTALL. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ENDPTn_EPSTALL field. +#define BR_USB_ENDPTn_EPSTALL(n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPSTALL)) +#endif + +//! @brief Format value for bitfield USB_ENDPTn_EPSTALL. +#define BF_USB_ENDPTn_EPSTALL(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ENDPTn_EPSTALL), uint8_t) & BM_USB_ENDPTn_EPSTALL) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the EPSTALL field to a new value. +#define BW_USB_ENDPTn_EPSTALL(n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPSTALL) = (v)) +#endif +//@} + +/*! + * @name Register USB_ENDPTn, field EPTXEN[2] (RW) + * + * This bit, when set, enables the endpoint for TX transfers. + */ +//@{ +#define BP_USB_ENDPTn_EPTXEN (2U) //!< Bit position for USB_ENDPTn_EPTXEN. +#define BM_USB_ENDPTn_EPTXEN (0x04U) //!< Bit mask for USB_ENDPTn_EPTXEN. +#define BS_USB_ENDPTn_EPTXEN (1U) //!< Bit field size in bits for USB_ENDPTn_EPTXEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ENDPTn_EPTXEN field. +#define BR_USB_ENDPTn_EPTXEN(n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPTXEN)) +#endif + +//! @brief Format value for bitfield USB_ENDPTn_EPTXEN. +#define BF_USB_ENDPTn_EPTXEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ENDPTn_EPTXEN), uint8_t) & BM_USB_ENDPTn_EPTXEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the EPTXEN field to a new value. +#define BW_USB_ENDPTn_EPTXEN(n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPTXEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_ENDPTn, field EPRXEN[3] (RW) + * + * This bit, when set, enables the endpoint for RX transfers. + */ +//@{ +#define BP_USB_ENDPTn_EPRXEN (3U) //!< Bit position for USB_ENDPTn_EPRXEN. +#define BM_USB_ENDPTn_EPRXEN (0x08U) //!< Bit mask for USB_ENDPTn_EPRXEN. +#define BS_USB_ENDPTn_EPRXEN (1U) //!< Bit field size in bits for USB_ENDPTn_EPRXEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ENDPTn_EPRXEN field. +#define BR_USB_ENDPTn_EPRXEN(n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPRXEN)) +#endif + +//! @brief Format value for bitfield USB_ENDPTn_EPRXEN. +#define BF_USB_ENDPTn_EPRXEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ENDPTn_EPRXEN), uint8_t) & BM_USB_ENDPTn_EPRXEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the EPRXEN field to a new value. +#define BW_USB_ENDPTn_EPRXEN(n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPRXEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_ENDPTn, field EPCTLDIS[4] (RW) + * + * This bit, when set, disables control (SETUP) transfers. When cleared, control + * transfers are enabled. This applies if and only if the EPRXEN and EPTXEN bits + * are also set. + */ +//@{ +#define BP_USB_ENDPTn_EPCTLDIS (4U) //!< Bit position for USB_ENDPTn_EPCTLDIS. +#define BM_USB_ENDPTn_EPCTLDIS (0x10U) //!< Bit mask for USB_ENDPTn_EPCTLDIS. +#define BS_USB_ENDPTn_EPCTLDIS (1U) //!< Bit field size in bits for USB_ENDPTn_EPCTLDIS. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ENDPTn_EPCTLDIS field. +#define BR_USB_ENDPTn_EPCTLDIS(n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPCTLDIS)) +#endif + +//! @brief Format value for bitfield USB_ENDPTn_EPCTLDIS. +#define BF_USB_ENDPTn_EPCTLDIS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ENDPTn_EPCTLDIS), uint8_t) & BM_USB_ENDPTn_EPCTLDIS) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the EPCTLDIS field to a new value. +#define BW_USB_ENDPTn_EPCTLDIS(n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_EPCTLDIS) = (v)) +#endif +//@} + +/*! + * @name Register USB_ENDPTn, field RETRYDIS[6] (RW) + * + * This is a Host mode only bit and is present in the control register for + * endpoint 0 (ENDPT0) only. When set this bit causes the host to not retry NAK'ed + * (Negative Acknowledgement) transactions. When a transaction is NAKed, the BDT PID + * field is updated with the NAK PID, and the TOKEN_DNE interrupt is set. When + * this bit is cleared, NAKed transactions are retried in hardware. This bit must + * be set when the host is attempting to poll an interrupt endpoint. + */ +//@{ +#define BP_USB_ENDPTn_RETRYDIS (6U) //!< Bit position for USB_ENDPTn_RETRYDIS. +#define BM_USB_ENDPTn_RETRYDIS (0x40U) //!< Bit mask for USB_ENDPTn_RETRYDIS. +#define BS_USB_ENDPTn_RETRYDIS (1U) //!< Bit field size in bits for USB_ENDPTn_RETRYDIS. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ENDPTn_RETRYDIS field. +#define BR_USB_ENDPTn_RETRYDIS(n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_RETRYDIS)) +#endif + +//! @brief Format value for bitfield USB_ENDPTn_RETRYDIS. +#define BF_USB_ENDPTn_RETRYDIS(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ENDPTn_RETRYDIS), uint8_t) & BM_USB_ENDPTn_RETRYDIS) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the RETRYDIS field to a new value. +#define BW_USB_ENDPTn_RETRYDIS(n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_RETRYDIS) = (v)) +#endif +//@} + +/*! + * @name Register USB_ENDPTn, field HOSTWOHUB[7] (RW) + * + * This is a Host mode only field and is present in the control register for + * endpoint 0 (ENDPT0) only. When set this bit allows the host to communicate to a + * directly connected low speed device. When cleared, the host produces the + * PRE_PID. It then switches to low-speed signaling when sending a token to a low speed + * device as required to communicate with a low speed device through a hub. + */ +//@{ +#define BP_USB_ENDPTn_HOSTWOHUB (7U) //!< Bit position for USB_ENDPTn_HOSTWOHUB. +#define BM_USB_ENDPTn_HOSTWOHUB (0x80U) //!< Bit mask for USB_ENDPTn_HOSTWOHUB. +#define BS_USB_ENDPTn_HOSTWOHUB (1U) //!< Bit field size in bits for USB_ENDPTn_HOSTWOHUB. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_ENDPTn_HOSTWOHUB field. +#define BR_USB_ENDPTn_HOSTWOHUB(n) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_HOSTWOHUB)) +#endif + +//! @brief Format value for bitfield USB_ENDPTn_HOSTWOHUB. +#define BF_USB_ENDPTn_HOSTWOHUB(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_ENDPTn_HOSTWOHUB), uint8_t) & BM_USB_ENDPTn_HOSTWOHUB) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the HOSTWOHUB field to a new value. +#define BW_USB_ENDPTn_HOSTWOHUB(n, v) (BITBAND_ACCESS8(HW_USB_ENDPTn_ADDR(n), BP_USB_ENDPTn_HOSTWOHUB) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_USBCTRL - USB Control register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_USBCTRL - USB Control register (RW) + * + * Reset value: 0xC0U + */ +typedef union _hw_usb_usbctrl +{ + uint8_t U; + struct _hw_usb_usbctrl_bitfields + { + uint8_t RESERVED0 : 6; //!< [5:0] + uint8_t PDE : 1; //!< [6] + uint8_t SUSP : 1; //!< [7] + } B; +} hw_usb_usbctrl_t; +#endif + +/*! + * @name Constants and macros for entire USB_USBCTRL register + */ +//@{ +#define HW_USB_USBCTRL_ADDR (REGS_USB_BASE + 0x100U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_USBCTRL (*(__IO hw_usb_usbctrl_t *) HW_USB_USBCTRL_ADDR) +#define HW_USB_USBCTRL_RD() (HW_USB_USBCTRL.U) +#define HW_USB_USBCTRL_WR(v) (HW_USB_USBCTRL.U = (v)) +#define HW_USB_USBCTRL_SET(v) (HW_USB_USBCTRL_WR(HW_USB_USBCTRL_RD() | (v))) +#define HW_USB_USBCTRL_CLR(v) (HW_USB_USBCTRL_WR(HW_USB_USBCTRL_RD() & ~(v))) +#define HW_USB_USBCTRL_TOG(v) (HW_USB_USBCTRL_WR(HW_USB_USBCTRL_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_USBCTRL bitfields + */ + +/*! + * @name Register USB_USBCTRL, field PDE[6] (RW) + * + * Enables the weak pulldowns on the USB transceiver. + * + * Values: + * - 0 - Weak pulldowns are disabled on D+ and D-. + * - 1 - Weak pulldowns are enabled on D+ and D-. + */ +//@{ +#define BP_USB_USBCTRL_PDE (6U) //!< Bit position for USB_USBCTRL_PDE. +#define BM_USB_USBCTRL_PDE (0x40U) //!< Bit mask for USB_USBCTRL_PDE. +#define BS_USB_USBCTRL_PDE (1U) //!< Bit field size in bits for USB_USBCTRL_PDE. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_USBCTRL_PDE field. +#define BR_USB_USBCTRL_PDE (BITBAND_ACCESS8(HW_USB_USBCTRL_ADDR, BP_USB_USBCTRL_PDE)) +#endif + +//! @brief Format value for bitfield USB_USBCTRL_PDE. +#define BF_USB_USBCTRL_PDE(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_USBCTRL_PDE), uint8_t) & BM_USB_USBCTRL_PDE) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the PDE field to a new value. +#define BW_USB_USBCTRL_PDE(v) (BITBAND_ACCESS8(HW_USB_USBCTRL_ADDR, BP_USB_USBCTRL_PDE) = (v)) +#endif +//@} + +/*! + * @name Register USB_USBCTRL, field SUSP[7] (RW) + * + * Places the USB transceiver into the suspend state. + * + * Values: + * - 0 - USB transceiver is not in suspend state. + * - 1 - USB transceiver is in suspend state. + */ +//@{ +#define BP_USB_USBCTRL_SUSP (7U) //!< Bit position for USB_USBCTRL_SUSP. +#define BM_USB_USBCTRL_SUSP (0x80U) //!< Bit mask for USB_USBCTRL_SUSP. +#define BS_USB_USBCTRL_SUSP (1U) //!< Bit field size in bits for USB_USBCTRL_SUSP. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_USBCTRL_SUSP field. +#define BR_USB_USBCTRL_SUSP (BITBAND_ACCESS8(HW_USB_USBCTRL_ADDR, BP_USB_USBCTRL_SUSP)) +#endif + +//! @brief Format value for bitfield USB_USBCTRL_SUSP. +#define BF_USB_USBCTRL_SUSP(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_USBCTRL_SUSP), uint8_t) & BM_USB_USBCTRL_SUSP) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the SUSP field to a new value. +#define BW_USB_USBCTRL_SUSP(v) (BITBAND_ACCESS8(HW_USB_USBCTRL_ADDR, BP_USB_USBCTRL_SUSP) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_OBSERVE - USB OTG Observe register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_OBSERVE - USB OTG Observe register (RO) + * + * Reset value: 0x50U + * + * Provides visibility on the state of the pull-ups and pull-downs at the + * transceiver. Useful when interfacing to an external OTG control module via a serial + * interface. + */ +typedef union _hw_usb_observe +{ + uint8_t U; + struct _hw_usb_observe_bitfields + { + uint8_t RESERVED0 : 4; //!< [3:0] + uint8_t DMPD : 1; //!< [4] + uint8_t RESERVED1 : 1; //!< [5] + uint8_t DPPD : 1; //!< [6] + uint8_t DPPU : 1; //!< [7] + } B; +} hw_usb_observe_t; +#endif + +/*! + * @name Constants and macros for entire USB_OBSERVE register + */ +//@{ +#define HW_USB_OBSERVE_ADDR (REGS_USB_BASE + 0x104U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_OBSERVE (*(__I hw_usb_observe_t *) HW_USB_OBSERVE_ADDR) +#define HW_USB_OBSERVE_RD() (HW_USB_OBSERVE.U) +#endif +//@} + +/* + * Constants & macros for individual USB_OBSERVE bitfields + */ + +/*! + * @name Register USB_OBSERVE, field DMPD[4] (RO) + * + * Provides observability of the D- Pulldown enable at the USB transceiver. + * + * Values: + * - 0 - D- pulldown disabled. + * - 1 - D- pulldown enabled. + */ +//@{ +#define BP_USB_OBSERVE_DMPD (4U) //!< Bit position for USB_OBSERVE_DMPD. +#define BM_USB_OBSERVE_DMPD (0x10U) //!< Bit mask for USB_OBSERVE_DMPD. +#define BS_USB_OBSERVE_DMPD (1U) //!< Bit field size in bits for USB_OBSERVE_DMPD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OBSERVE_DMPD field. +#define BR_USB_OBSERVE_DMPD (BITBAND_ACCESS8(HW_USB_OBSERVE_ADDR, BP_USB_OBSERVE_DMPD)) +#endif +//@} + +/*! + * @name Register USB_OBSERVE, field DPPD[6] (RO) + * + * Provides observability of the D+ Pulldown enable at the USB transceiver. + * + * Values: + * - 0 - D+ pulldown disabled. + * - 1 - D+ pulldown enabled. + */ +//@{ +#define BP_USB_OBSERVE_DPPD (6U) //!< Bit position for USB_OBSERVE_DPPD. +#define BM_USB_OBSERVE_DPPD (0x40U) //!< Bit mask for USB_OBSERVE_DPPD. +#define BS_USB_OBSERVE_DPPD (1U) //!< Bit field size in bits for USB_OBSERVE_DPPD. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OBSERVE_DPPD field. +#define BR_USB_OBSERVE_DPPD (BITBAND_ACCESS8(HW_USB_OBSERVE_ADDR, BP_USB_OBSERVE_DPPD)) +#endif +//@} + +/*! + * @name Register USB_OBSERVE, field DPPU[7] (RO) + * + * Provides observability of the D+ Pullup enable at the USB transceiver. + * + * Values: + * - 0 - D+ pullup disabled. + * - 1 - D+ pullup enabled. + */ +//@{ +#define BP_USB_OBSERVE_DPPU (7U) //!< Bit position for USB_OBSERVE_DPPU. +#define BM_USB_OBSERVE_DPPU (0x80U) //!< Bit mask for USB_OBSERVE_DPPU. +#define BS_USB_OBSERVE_DPPU (1U) //!< Bit field size in bits for USB_OBSERVE_DPPU. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_OBSERVE_DPPU field. +#define BR_USB_OBSERVE_DPPU (BITBAND_ACCESS8(HW_USB_OBSERVE_ADDR, BP_USB_OBSERVE_DPPU)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_CONTROL - USB OTG Control register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_CONTROL - USB OTG Control register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_usb_control +{ + uint8_t U; + struct _hw_usb_control_bitfields + { + uint8_t RESERVED0 : 4; //!< [3:0] + uint8_t DPPULLUPNONOTG : 1; //!< [4] + uint8_t RESERVED1 : 3; //!< [7:5] + } B; +} hw_usb_control_t; +#endif + +/*! + * @name Constants and macros for entire USB_CONTROL register + */ +//@{ +#define HW_USB_CONTROL_ADDR (REGS_USB_BASE + 0x108U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_CONTROL (*(__IO hw_usb_control_t *) HW_USB_CONTROL_ADDR) +#define HW_USB_CONTROL_RD() (HW_USB_CONTROL.U) +#define HW_USB_CONTROL_WR(v) (HW_USB_CONTROL.U = (v)) +#define HW_USB_CONTROL_SET(v) (HW_USB_CONTROL_WR(HW_USB_CONTROL_RD() | (v))) +#define HW_USB_CONTROL_CLR(v) (HW_USB_CONTROL_WR(HW_USB_CONTROL_RD() & ~(v))) +#define HW_USB_CONTROL_TOG(v) (HW_USB_CONTROL_WR(HW_USB_CONTROL_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_CONTROL bitfields + */ + +/*! + * @name Register USB_CONTROL, field DPPULLUPNONOTG[4] (RW) + * + * Provides control of the DP Pullup in USBOTG, if USB is configured in non-OTG + * device mode. + * + * Values: + * - 0 - DP Pullup in non-OTG device mode is not enabled. + * - 1 - DP Pullup in non-OTG device mode is enabled. + */ +//@{ +#define BP_USB_CONTROL_DPPULLUPNONOTG (4U) //!< Bit position for USB_CONTROL_DPPULLUPNONOTG. +#define BM_USB_CONTROL_DPPULLUPNONOTG (0x10U) //!< Bit mask for USB_CONTROL_DPPULLUPNONOTG. +#define BS_USB_CONTROL_DPPULLUPNONOTG (1U) //!< Bit field size in bits for USB_CONTROL_DPPULLUPNONOTG. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CONTROL_DPPULLUPNONOTG field. +#define BR_USB_CONTROL_DPPULLUPNONOTG (BITBAND_ACCESS8(HW_USB_CONTROL_ADDR, BP_USB_CONTROL_DPPULLUPNONOTG)) +#endif + +//! @brief Format value for bitfield USB_CONTROL_DPPULLUPNONOTG. +#define BF_USB_CONTROL_DPPULLUPNONOTG(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CONTROL_DPPULLUPNONOTG), uint8_t) & BM_USB_CONTROL_DPPULLUPNONOTG) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the DPPULLUPNONOTG field to a new value. +#define BW_USB_CONTROL_DPPULLUPNONOTG(v) (BITBAND_ACCESS8(HW_USB_CONTROL_ADDR, BP_USB_CONTROL_DPPULLUPNONOTG) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_USBTRC0 - USB Transceiver Control register 0 +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_USBTRC0 - USB Transceiver Control register 0 (RW) + * + * Reset value: 0x00U + * + * Includes signals for basic operation of the on-chip USB Full Speed + * transceiver and configuration of the USB data connection that are not otherwise included + * in the USB Full Speed controller registers. + */ +typedef union _hw_usb_usbtrc0 +{ + uint8_t U; + struct _hw_usb_usbtrc0_bitfields + { + uint8_t USB_RESUME_INT : 1; //!< [0] USB Asynchronous Interrupt + uint8_t SYNC_DET : 1; //!< [1] Synchronous USB Interrupt Detect + uint8_t USB_CLK_RECOVERY_INT : 1; //!< [2] Combined USB Clock + //! Recovery interrupt status + uint8_t RESERVED0 : 2; //!< [4:3] + uint8_t USBRESMEN : 1; //!< [5] Asynchronous Resume Interrupt Enable + uint8_t RESERVED1 : 1; //!< [6] + uint8_t USBRESET : 1; //!< [7] USB Reset + } B; +} hw_usb_usbtrc0_t; +#endif + +/*! + * @name Constants and macros for entire USB_USBTRC0 register + */ +//@{ +#define HW_USB_USBTRC0_ADDR (REGS_USB_BASE + 0x10CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_USBTRC0 (*(__IO hw_usb_usbtrc0_t *) HW_USB_USBTRC0_ADDR) +#define HW_USB_USBTRC0_RD() (HW_USB_USBTRC0.U) +#define HW_USB_USBTRC0_WR(v) (HW_USB_USBTRC0.U = (v)) +#define HW_USB_USBTRC0_SET(v) (HW_USB_USBTRC0_WR(HW_USB_USBTRC0_RD() | (v))) +#define HW_USB_USBTRC0_CLR(v) (HW_USB_USBTRC0_WR(HW_USB_USBTRC0_RD() & ~(v))) +#define HW_USB_USBTRC0_TOG(v) (HW_USB_USBTRC0_WR(HW_USB_USBTRC0_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_USBTRC0 bitfields + */ + +/*! + * @name Register USB_USBTRC0, field USB_RESUME_INT[0] (RO) + * + * Values: + * - 0 - No interrupt was generated. + * - 1 - Interrupt was generated because of the USB asynchronous interrupt. + */ +//@{ +#define BP_USB_USBTRC0_USB_RESUME_INT (0U) //!< Bit position for USB_USBTRC0_USB_RESUME_INT. +#define BM_USB_USBTRC0_USB_RESUME_INT (0x01U) //!< Bit mask for USB_USBTRC0_USB_RESUME_INT. +#define BS_USB_USBTRC0_USB_RESUME_INT (1U) //!< Bit field size in bits for USB_USBTRC0_USB_RESUME_INT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_USBTRC0_USB_RESUME_INT field. +#define BR_USB_USBTRC0_USB_RESUME_INT (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR, BP_USB_USBTRC0_USB_RESUME_INT)) +#endif +//@} + +/*! + * @name Register USB_USBTRC0, field SYNC_DET[1] (RO) + * + * Values: + * - 0 - Synchronous interrupt has not been detected. + * - 1 - Synchronous interrupt has been detected. + */ +//@{ +#define BP_USB_USBTRC0_SYNC_DET (1U) //!< Bit position for USB_USBTRC0_SYNC_DET. +#define BM_USB_USBTRC0_SYNC_DET (0x02U) //!< Bit mask for USB_USBTRC0_SYNC_DET. +#define BS_USB_USBTRC0_SYNC_DET (1U) //!< Bit field size in bits for USB_USBTRC0_SYNC_DET. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_USBTRC0_SYNC_DET field. +#define BR_USB_USBTRC0_SYNC_DET (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR, BP_USB_USBTRC0_SYNC_DET)) +#endif +//@} + +/*! + * @name Register USB_USBTRC0, field USB_CLK_RECOVERY_INT[2] (RO) + * + * This read-only field will be set to value high at 1'b1 when any of USB clock + * recovery interrupt conditions are detected and those interrupts are unmasked. + * For customer use the only unmasked USB clock recovery interrupt condition + * results from an overflow of the frequency trim setting values indicating that the + * frequency trim calculated is out of the adjustment range of the IRC48M output + * clock. To clear this bit after it has been set, Write 0xFF to register + * USB_CLK_RECOVER_INT_STATUS. + */ +//@{ +#define BP_USB_USBTRC0_USB_CLK_RECOVERY_INT (2U) //!< Bit position for USB_USBTRC0_USB_CLK_RECOVERY_INT. +#define BM_USB_USBTRC0_USB_CLK_RECOVERY_INT (0x04U) //!< Bit mask for USB_USBTRC0_USB_CLK_RECOVERY_INT. +#define BS_USB_USBTRC0_USB_CLK_RECOVERY_INT (1U) //!< Bit field size in bits for USB_USBTRC0_USB_CLK_RECOVERY_INT. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_USBTRC0_USB_CLK_RECOVERY_INT field. +#define BR_USB_USBTRC0_USB_CLK_RECOVERY_INT (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR, BP_USB_USBTRC0_USB_CLK_RECOVERY_INT)) +#endif +//@} + +/*! + * @name Register USB_USBTRC0, field USBRESMEN[5] (RW) + * + * This bit, when set, allows the USB module to send an asynchronous wakeup + * event to the MCU upon detection of resume signaling on the USB bus. The MCU then + * re-enables clocks to the USB module. It is used for low-power suspend mode when + * USB module clocks are stopped or the USB transceiver is in Suspend mode. + * Async wakeup only works in device mode. + * + * Values: + * - 0 - USB asynchronous wakeup from suspend mode disabled. + * - 1 - USB asynchronous wakeup from suspend mode enabled. The asynchronous + * resume interrupt differs from the synchronous resume interrupt in that it + * asynchronously detects K-state using the unfiltered state of the D+ and D- + * pins. This interrupt should only be enabled when the Transceiver is + * suspended. + */ +//@{ +#define BP_USB_USBTRC0_USBRESMEN (5U) //!< Bit position for USB_USBTRC0_USBRESMEN. +#define BM_USB_USBTRC0_USBRESMEN (0x20U) //!< Bit mask for USB_USBTRC0_USBRESMEN. +#define BS_USB_USBTRC0_USBRESMEN (1U) //!< Bit field size in bits for USB_USBTRC0_USBRESMEN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_USBTRC0_USBRESMEN field. +#define BR_USB_USBTRC0_USBRESMEN (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR, BP_USB_USBTRC0_USBRESMEN)) +#endif + +//! @brief Format value for bitfield USB_USBTRC0_USBRESMEN. +#define BF_USB_USBTRC0_USBRESMEN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_USBTRC0_USBRESMEN), uint8_t) & BM_USB_USBTRC0_USBRESMEN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the USBRESMEN field to a new value. +#define BW_USB_USBTRC0_USBRESMEN(v) (BITBAND_ACCESS8(HW_USB_USBTRC0_ADDR, BP_USB_USBTRC0_USBRESMEN) = (v)) +#endif +//@} + +/*! + * @name Register USB_USBTRC0, field USBRESET[7] (WO) + * + * Generates a hard reset to USBOTG. After this bit is set and the reset occurs, + * this bit is automatically cleared. This bit is always read as zero. Wait two + * USB clock cycles after setting this bit. + * + * Values: + * - 0 - Normal USB module operation. + * - 1 - Returns the USB module to its reset state. + */ +//@{ +#define BP_USB_USBTRC0_USBRESET (7U) //!< Bit position for USB_USBTRC0_USBRESET. +#define BM_USB_USBTRC0_USBRESET (0x80U) //!< Bit mask for USB_USBTRC0_USBRESET. +#define BS_USB_USBTRC0_USBRESET (1U) //!< Bit field size in bits for USB_USBTRC0_USBRESET. + +//! @brief Format value for bitfield USB_USBTRC0_USBRESET. +#define BF_USB_USBTRC0_USBRESET(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_USBTRC0_USBRESET), uint8_t) & BM_USB_USBTRC0_USBRESET) +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_USBFRMADJUST - Frame Adjust Register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_USBFRMADJUST - Frame Adjust Register (RW) + * + * Reset value: 0x00U + */ +typedef union _hw_usb_usbfrmadjust +{ + uint8_t U; + struct _hw_usb_usbfrmadjust_bitfields + { + uint8_t ADJ : 8; //!< [7:0] Frame Adjustment + } B; +} hw_usb_usbfrmadjust_t; +#endif + +/*! + * @name Constants and macros for entire USB_USBFRMADJUST register + */ +//@{ +#define HW_USB_USBFRMADJUST_ADDR (REGS_USB_BASE + 0x114U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_USBFRMADJUST (*(__IO hw_usb_usbfrmadjust_t *) HW_USB_USBFRMADJUST_ADDR) +#define HW_USB_USBFRMADJUST_RD() (HW_USB_USBFRMADJUST.U) +#define HW_USB_USBFRMADJUST_WR(v) (HW_USB_USBFRMADJUST.U = (v)) +#define HW_USB_USBFRMADJUST_SET(v) (HW_USB_USBFRMADJUST_WR(HW_USB_USBFRMADJUST_RD() | (v))) +#define HW_USB_USBFRMADJUST_CLR(v) (HW_USB_USBFRMADJUST_WR(HW_USB_USBFRMADJUST_RD() & ~(v))) +#define HW_USB_USBFRMADJUST_TOG(v) (HW_USB_USBFRMADJUST_WR(HW_USB_USBFRMADJUST_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_USBFRMADJUST bitfields + */ + +/*! + * @name Register USB_USBFRMADJUST, field ADJ[7:0] (RW) + * + * In Host mode, the frame adjustment is a twos complement number that adjusts + * the period of each USB frame in 12-MHz clock periods. A SOF is normally + * generated every 12,000 12-MHz clock cycles. The Frame Adjust Register can adjust this + * by -128 to +127 to compensate for inaccuracies in the USB 48-MHz clock. + * Changes to the ADJ bit take effect at the next start of the next frame. + */ +//@{ +#define BP_USB_USBFRMADJUST_ADJ (0U) //!< Bit position for USB_USBFRMADJUST_ADJ. +#define BM_USB_USBFRMADJUST_ADJ (0xFFU) //!< Bit mask for USB_USBFRMADJUST_ADJ. +#define BS_USB_USBFRMADJUST_ADJ (8U) //!< Bit field size in bits for USB_USBFRMADJUST_ADJ. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_USBFRMADJUST_ADJ field. +#define BR_USB_USBFRMADJUST_ADJ (HW_USB_USBFRMADJUST.U) +#endif + +//! @brief Format value for bitfield USB_USBFRMADJUST_ADJ. +#define BF_USB_USBFRMADJUST_ADJ(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_USBFRMADJUST_ADJ), uint8_t) & BM_USB_USBFRMADJUST_ADJ) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the ADJ field to a new value. +#define BW_USB_USBFRMADJUST_ADJ(v) (HW_USB_USBFRMADJUST_WR(v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_CLK_RECOVER_CTRL - USB Clock recovery control +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_CLK_RECOVER_CTRL - USB Clock recovery control (RW) + * + * Reset value: 0x00U + * + * Signals in this register control the crystal-less USB clock mode in which the + * internal IRC48M oscillator is tuned to match the clock extracted from the + * incoming USB data stream. The IRC48M internal oscillator module must be enabled + * in register USB_CLK_RECOVER_IRC_EN for this mode. + */ +typedef union _hw_usb_clk_recover_ctrl +{ + uint8_t U; + struct _hw_usb_clk_recover_ctrl_bitfields + { + uint8_t RESERVED0 : 5; //!< [4:0] + uint8_t RESTART_IFRTRIM_EN : 1; //!< [5] Restart from IFR trim value + uint8_t RESET_RESUME_ROUGH_EN : 1; //!< [6] Reset/resume to rough + //! phase enable + uint8_t CLOCK_RECOVER_EN : 1; //!< [7] Crystal-less USB enable + } B; +} hw_usb_clk_recover_ctrl_t; +#endif + +/*! + * @name Constants and macros for entire USB_CLK_RECOVER_CTRL register + */ +//@{ +#define HW_USB_CLK_RECOVER_CTRL_ADDR (REGS_USB_BASE + 0x140U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_CLK_RECOVER_CTRL (*(__IO hw_usb_clk_recover_ctrl_t *) HW_USB_CLK_RECOVER_CTRL_ADDR) +#define HW_USB_CLK_RECOVER_CTRL_RD() (HW_USB_CLK_RECOVER_CTRL.U) +#define HW_USB_CLK_RECOVER_CTRL_WR(v) (HW_USB_CLK_RECOVER_CTRL.U = (v)) +#define HW_USB_CLK_RECOVER_CTRL_SET(v) (HW_USB_CLK_RECOVER_CTRL_WR(HW_USB_CLK_RECOVER_CTRL_RD() | (v))) +#define HW_USB_CLK_RECOVER_CTRL_CLR(v) (HW_USB_CLK_RECOVER_CTRL_WR(HW_USB_CLK_RECOVER_CTRL_RD() & ~(v))) +#define HW_USB_CLK_RECOVER_CTRL_TOG(v) (HW_USB_CLK_RECOVER_CTRL_WR(HW_USB_CLK_RECOVER_CTRL_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_CLK_RECOVER_CTRL bitfields + */ + +/*! + * @name Register USB_CLK_RECOVER_CTRL, field RESTART_IFRTRIM_EN[5] (RW) + * + * IRC48 has a default trim fine value whose default value is factory trimmed + * (the IFR trim value). Clock recover block tracks the accuracy of the clock 48Mhz + * and keeps updating the trim fine value accordingly + * + * Values: + * - 0 - Trim fine adjustment always works based on the previous updated trim + * fine value (default) + * - 1 - Trim fine restarts from the IFR trim value whenever + * bus_reset/bus_resume is detected or module enable is desasserted + */ +//@{ +#define BP_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN (5U) //!< Bit position for USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN. +#define BM_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN (0x20U) //!< Bit mask for USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN. +#define BS_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN (1U) //!< Bit field size in bits for USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN field. +#define BR_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR, BP_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN)) +#endif + +//! @brief Format value for bitfield USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN. +#define BF_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN), uint8_t) & BM_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the RESTART_IFRTRIM_EN field to a new value. +#define BW_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN(v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR, BP_USB_CLK_RECOVER_CTRL_RESTART_IFRTRIM_EN) = (v)) +#endif +//@} + +/*! + * @name Register USB_CLK_RECOVER_CTRL, field RESET_RESUME_ROUGH_EN[6] (RW) + * + * The clock recovery block tracks the IRC48Mhz to get an accurate 48Mhz clock. + * It has two phases after user enables clock_recover_en bit, rough phase and + * tracking phase. The step to fine tune the IRC 48Mhz by adjusting the trim fine + * value is different during these two phases. The step in rough phase is larger + * than that in tracking phase. Switch back to rough stage whenever USB bus reset + * or bus resume occurs. + * + * Values: + * - 0 - Always works in tracking phase after the 1st time rough to track + * transition (default) + * - 1 - Go back to rough stage whenever bus reset or bus resume occurs + */ +//@{ +#define BP_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN (6U) //!< Bit position for USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN. +#define BM_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN (0x40U) //!< Bit mask for USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN. +#define BS_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN (1U) //!< Bit field size in bits for USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN field. +#define BR_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR, BP_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN)) +#endif + +//! @brief Format value for bitfield USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN. +#define BF_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN), uint8_t) & BM_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the RESET_RESUME_ROUGH_EN field to a new value. +#define BW_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN(v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR, BP_USB_CLK_RECOVER_CTRL_RESET_RESUME_ROUGH_EN) = (v)) +#endif +//@} + +/*! + * @name Register USB_CLK_RECOVER_CTRL, field CLOCK_RECOVER_EN[7] (RW) + * + * This bit must be enabled if user wants to use the crystal-less USB mode for + * the Full Speed USB controller and transceiver. This bit should not be set for + * USB host mode or OTG. + * + * Values: + * - 0 - Disable clock recovery block (default) + * - 1 - Enable clock recovery block + */ +//@{ +#define BP_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN (7U) //!< Bit position for USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN. +#define BM_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN (0x80U) //!< Bit mask for USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN. +#define BS_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN (1U) //!< Bit field size in bits for USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN field. +#define BR_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR, BP_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN)) +#endif + +//! @brief Format value for bitfield USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN. +#define BF_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN), uint8_t) & BM_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the CLOCK_RECOVER_EN field to a new value. +#define BW_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN(v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_CTRL_ADDR, BP_USB_CLK_RECOVER_CTRL_CLOCK_RECOVER_EN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_CLK_RECOVER_IRC_EN - IRC48M oscillator enable register +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_CLK_RECOVER_IRC_EN - IRC48M oscillator enable register (RW) + * + * Reset value: 0x01U + * + * Controls basic operation of the on-chip IRC48M module used to produce nominal + * 48MHz clocks for USB crystal-less operation and other functions. See + * additional information about the IRC48M operation in the Clock Distribution chapter. + */ +typedef union _hw_usb_clk_recover_irc_en +{ + uint8_t U; + struct _hw_usb_clk_recover_irc_en_bitfields + { + uint8_t REG_EN : 1; //!< [0] IRC48M regulator enable + uint8_t IRC_EN : 1; //!< [1] IRC48M enable + uint8_t RESERVED0 : 6; //!< [7:2] + } B; +} hw_usb_clk_recover_irc_en_t; +#endif + +/*! + * @name Constants and macros for entire USB_CLK_RECOVER_IRC_EN register + */ +//@{ +#define HW_USB_CLK_RECOVER_IRC_EN_ADDR (REGS_USB_BASE + 0x144U) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_CLK_RECOVER_IRC_EN (*(__IO hw_usb_clk_recover_irc_en_t *) HW_USB_CLK_RECOVER_IRC_EN_ADDR) +#define HW_USB_CLK_RECOVER_IRC_EN_RD() (HW_USB_CLK_RECOVER_IRC_EN.U) +#define HW_USB_CLK_RECOVER_IRC_EN_WR(v) (HW_USB_CLK_RECOVER_IRC_EN.U = (v)) +#define HW_USB_CLK_RECOVER_IRC_EN_SET(v) (HW_USB_CLK_RECOVER_IRC_EN_WR(HW_USB_CLK_RECOVER_IRC_EN_RD() | (v))) +#define HW_USB_CLK_RECOVER_IRC_EN_CLR(v) (HW_USB_CLK_RECOVER_IRC_EN_WR(HW_USB_CLK_RECOVER_IRC_EN_RD() & ~(v))) +#define HW_USB_CLK_RECOVER_IRC_EN_TOG(v) (HW_USB_CLK_RECOVER_IRC_EN_WR(HW_USB_CLK_RECOVER_IRC_EN_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_CLK_RECOVER_IRC_EN bitfields + */ + +/*! + * @name Register USB_CLK_RECOVER_IRC_EN, field REG_EN[0] (RW) + * + * This bit is used to enable the local analog regulator for IRC48Mhz module. + * This bit must be set if user wants to use the crystal-less USB clock + * configuration. + * + * Values: + * - 0 - IRC48M local regulator is disabled + * - 1 - IRC48M local regulator is enabled (default) + */ +//@{ +#define BP_USB_CLK_RECOVER_IRC_EN_REG_EN (0U) //!< Bit position for USB_CLK_RECOVER_IRC_EN_REG_EN. +#define BM_USB_CLK_RECOVER_IRC_EN_REG_EN (0x01U) //!< Bit mask for USB_CLK_RECOVER_IRC_EN_REG_EN. +#define BS_USB_CLK_RECOVER_IRC_EN_REG_EN (1U) //!< Bit field size in bits for USB_CLK_RECOVER_IRC_EN_REG_EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CLK_RECOVER_IRC_EN_REG_EN field. +#define BR_USB_CLK_RECOVER_IRC_EN_REG_EN (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_IRC_EN_ADDR, BP_USB_CLK_RECOVER_IRC_EN_REG_EN)) +#endif + +//! @brief Format value for bitfield USB_CLK_RECOVER_IRC_EN_REG_EN. +#define BF_USB_CLK_RECOVER_IRC_EN_REG_EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CLK_RECOVER_IRC_EN_REG_EN), uint8_t) & BM_USB_CLK_RECOVER_IRC_EN_REG_EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the REG_EN field to a new value. +#define BW_USB_CLK_RECOVER_IRC_EN_REG_EN(v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_IRC_EN_ADDR, BP_USB_CLK_RECOVER_IRC_EN_REG_EN) = (v)) +#endif +//@} + +/*! + * @name Register USB_CLK_RECOVER_IRC_EN, field IRC_EN[1] (RW) + * + * This bit is used to enable the on-chip IRC48Mhz module to generate clocks for + * crystal-less USB. It can only be used for FS USB device mode operation. This + * bit must be set before using the crystal-less USB clock configuration. + * + * Values: + * - 0 - Disable the IRC48M module (default) + * - 1 - Enable the IRC48M module + */ +//@{ +#define BP_USB_CLK_RECOVER_IRC_EN_IRC_EN (1U) //!< Bit position for USB_CLK_RECOVER_IRC_EN_IRC_EN. +#define BM_USB_CLK_RECOVER_IRC_EN_IRC_EN (0x02U) //!< Bit mask for USB_CLK_RECOVER_IRC_EN_IRC_EN. +#define BS_USB_CLK_RECOVER_IRC_EN_IRC_EN (1U) //!< Bit field size in bits for USB_CLK_RECOVER_IRC_EN_IRC_EN. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CLK_RECOVER_IRC_EN_IRC_EN field. +#define BR_USB_CLK_RECOVER_IRC_EN_IRC_EN (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_IRC_EN_ADDR, BP_USB_CLK_RECOVER_IRC_EN_IRC_EN)) +#endif + +//! @brief Format value for bitfield USB_CLK_RECOVER_IRC_EN_IRC_EN. +#define BF_USB_CLK_RECOVER_IRC_EN_IRC_EN(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CLK_RECOVER_IRC_EN_IRC_EN), uint8_t) & BM_USB_CLK_RECOVER_IRC_EN_IRC_EN) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the IRC_EN field to a new value. +#define BW_USB_CLK_RECOVER_IRC_EN_IRC_EN(v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_IRC_EN_ADDR, BP_USB_CLK_RECOVER_IRC_EN_IRC_EN) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// HW_USB_CLK_RECOVER_INT_STATUS - Clock recovery separated interrupt status +//------------------------------------------------------------------------------------------- + +#ifndef __LANGUAGE_ASM__ +/*! + * @brief HW_USB_CLK_RECOVER_INT_STATUS - Clock recovery separated interrupt status (W1C) + * + * Reset value: 0x00U + * + * A Write operation with value high at 1'b1 on any combination of individual + * bits will clear those bits. + */ +typedef union _hw_usb_clk_recover_int_status +{ + uint8_t U; + struct _hw_usb_clk_recover_int_status_bitfields + { + uint8_t RESERVED0 : 4; //!< [3:0] + uint8_t OVF_ERROR : 1; //!< [4] + uint8_t RESERVED1 : 3; //!< [7:5] + } B; +} hw_usb_clk_recover_int_status_t; +#endif + +/*! + * @name Constants and macros for entire USB_CLK_RECOVER_INT_STATUS register + */ +//@{ +#define HW_USB_CLK_RECOVER_INT_STATUS_ADDR (REGS_USB_BASE + 0x15CU) + +#ifndef __LANGUAGE_ASM__ +#define HW_USB_CLK_RECOVER_INT_STATUS (*(__IO hw_usb_clk_recover_int_status_t *) HW_USB_CLK_RECOVER_INT_STATUS_ADDR) +#define HW_USB_CLK_RECOVER_INT_STATUS_RD() (HW_USB_CLK_RECOVER_INT_STATUS.U) +#define HW_USB_CLK_RECOVER_INT_STATUS_WR(v) (HW_USB_CLK_RECOVER_INT_STATUS.U = (v)) +#define HW_USB_CLK_RECOVER_INT_STATUS_SET(v) (HW_USB_CLK_RECOVER_INT_STATUS_WR(HW_USB_CLK_RECOVER_INT_STATUS_RD() | (v))) +#define HW_USB_CLK_RECOVER_INT_STATUS_CLR(v) (HW_USB_CLK_RECOVER_INT_STATUS_WR(HW_USB_CLK_RECOVER_INT_STATUS_RD() & ~(v))) +#define HW_USB_CLK_RECOVER_INT_STATUS_TOG(v) (HW_USB_CLK_RECOVER_INT_STATUS_WR(HW_USB_CLK_RECOVER_INT_STATUS_RD() ^ (v))) +#endif +//@} + +/* + * Constants & macros for individual USB_CLK_RECOVER_INT_STATUS bitfields + */ + +/*! + * @name Register USB_CLK_RECOVER_INT_STATUS, field OVF_ERROR[4] (W1C) + * + * Indicates that the USB clock recovery algorithm has detected that the + * frequency trim adjustment needed for the IRC48M output clock is outside the available + * TRIM_FINE adjustment range for the IRC48M module. + * + * Values: + * - 0 - No interrupt is reported + * - 1 - Unmasked interrupt has been generated + */ +//@{ +#define BP_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR (4U) //!< Bit position for USB_CLK_RECOVER_INT_STATUS_OVF_ERROR. +#define BM_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR (0x10U) //!< Bit mask for USB_CLK_RECOVER_INT_STATUS_OVF_ERROR. +#define BS_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR (1U) //!< Bit field size in bits for USB_CLK_RECOVER_INT_STATUS_OVF_ERROR. + +#ifndef __LANGUAGE_ASM__ +//! @brief Read current value of the USB_CLK_RECOVER_INT_STATUS_OVF_ERROR field. +#define BR_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_INT_STATUS_ADDR, BP_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR)) +#endif + +//! @brief Format value for bitfield USB_CLK_RECOVER_INT_STATUS_OVF_ERROR. +#define BF_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR(v) (__REG_VALUE_TYPE((__REG_VALUE_TYPE((v), uint8_t) << BP_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR), uint8_t) & BM_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR) + +#ifndef __LANGUAGE_ASM__ +//! @brief Set the OVF_ERROR field to a new value. +#define BW_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR(v) (BITBAND_ACCESS8(HW_USB_CLK_RECOVER_INT_STATUS_ADDR, BP_USB_CLK_RECOVER_INT_STATUS_OVF_ERROR) = (v)) +#endif +//@} + +//------------------------------------------------------------------------------------------- +// hw_usb_t - module struct +//------------------------------------------------------------------------------------------- +/*! + * @brief All USB module registers. + */ +#ifndef __LANGUAGE_ASM__ +#pragma pack(1) +typedef struct _hw_usb +{ + __I hw_usb_perid_t PERID; //!< [0x0] Peripheral ID register + uint8_t _reserved0[3]; + __I hw_usb_idcomp_t IDCOMP; //!< [0x4] Peripheral ID Complement register + uint8_t _reserved1[3]; + __I hw_usb_rev_t REV; //!< [0x8] Peripheral Revision register + uint8_t _reserved2[3]; + __I hw_usb_addinfo_t ADDINFO; //!< [0xC] Peripheral Additional Info register + uint8_t _reserved3[3]; + __IO hw_usb_otgistat_t OTGISTAT; //!< [0x10] OTG Interrupt Status register + uint8_t _reserved4[3]; + __IO hw_usb_otgicr_t OTGICR; //!< [0x14] OTG Interrupt Control register + uint8_t _reserved5[3]; + __IO hw_usb_otgstat_t OTGSTAT; //!< [0x18] OTG Status register + uint8_t _reserved6[3]; + __IO hw_usb_otgctl_t OTGCTL; //!< [0x1C] OTG Control register + uint8_t _reserved7[99]; + __IO hw_usb_istat_t ISTAT; //!< [0x80] Interrupt Status register + uint8_t _reserved8[3]; + __IO hw_usb_inten_t INTEN; //!< [0x84] Interrupt Enable register + uint8_t _reserved9[3]; + __IO hw_usb_errstat_t ERRSTAT; //!< [0x88] Error Interrupt Status register + uint8_t _reserved10[3]; + __IO hw_usb_erren_t ERREN; //!< [0x8C] Error Interrupt Enable register + uint8_t _reserved11[3]; + __I hw_usb_stat_t STAT; //!< [0x90] Status register + uint8_t _reserved12[3]; + __IO hw_usb_ctl_t CTL; //!< [0x94] Control register + uint8_t _reserved13[3]; + __IO hw_usb_addr_t ADDR; //!< [0x98] Address register + uint8_t _reserved14[3]; + __IO hw_usb_bdtpage1_t BDTPAGE1; //!< [0x9C] BDT Page register 1 + uint8_t _reserved15[3]; + __IO hw_usb_frmnuml_t FRMNUML; //!< [0xA0] Frame Number register Low + uint8_t _reserved16[3]; + __IO hw_usb_frmnumh_t FRMNUMH; //!< [0xA4] Frame Number register High + uint8_t _reserved17[3]; + __IO hw_usb_token_t TOKEN; //!< [0xA8] Token register + uint8_t _reserved18[3]; + __IO hw_usb_softhld_t SOFTHLD; //!< [0xAC] SOF Threshold register + uint8_t _reserved19[3]; + __IO hw_usb_bdtpage2_t BDTPAGE2; //!< [0xB0] BDT Page Register 2 + uint8_t _reserved20[3]; + __IO hw_usb_bdtpage3_t BDTPAGE3; //!< [0xB4] BDT Page Register 3 + uint8_t _reserved21[11]; + struct { + __IO hw_usb_endptn_t ENDPTn; //!< [0xC0] Endpoint Control register + uint8_t _reserved0[3]; + } ENDPOINT[16]; + __IO hw_usb_usbctrl_t USBCTRL; //!< [0x100] USB Control register + uint8_t _reserved22[3]; + __I hw_usb_observe_t OBSERVE; //!< [0x104] USB OTG Observe register + uint8_t _reserved23[3]; + __IO hw_usb_control_t CONTROL; //!< [0x108] USB OTG Control register + uint8_t _reserved24[3]; + __IO hw_usb_usbtrc0_t USBTRC0; //!< [0x10C] USB Transceiver Control register 0 + uint8_t _reserved25[7]; + __IO hw_usb_usbfrmadjust_t USBFRMADJUST; //!< [0x114] Frame Adjust Register + uint8_t _reserved26[43]; + __IO hw_usb_clk_recover_ctrl_t CLK_RECOVER_CTRL; //!< [0x140] USB Clock recovery control + uint8_t _reserved27[3]; + __IO hw_usb_clk_recover_irc_en_t CLK_RECOVER_IRC_EN; //!< [0x144] IRC48M oscillator enable register + uint8_t _reserved28[23]; + __IO hw_usb_clk_recover_int_status_t CLK_RECOVER_INT_STATUS; //!< [0x15C] Clock recovery separated interrupt status +} hw_usb_t; +#pragma pack() + +//! @brief Macro to access all USB registers. +//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct, +//! use the '&' operator, like <code>&HW_USB</code>. +#define HW_USB (*(hw_usb_t *) REGS_USB_BASE) +#endif + +#endif // __HW_USB_REGISTERS_H__ +// v22/130726/0.9 +// EOF