Diff: targets/hal/TARGET_STM/TARGET_NZ32ST1L/PeripheralNames.h

Revision:

569:18c5cf67e74d

Parent:

568:08b2e7b6bab9

Child:

570:e6ed7264c56c

--- a/targets/hal/TARGET_STM/TARGET_NZ32ST1L/PeripheralNames.h	Tue Jun 16 07:30:08 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,90 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
-    DAC_1 = (int)DAC_BASE
-} DACName;
-
-typedef enum {
-    UART_1 = (int)USART1_BASE,
-    UART_2 = (int)USART2_BASE,
-    UART_3 = (int)USART3_BASE
-} UARTName;
-
-#if (MX_DEFAULT_SERIAL_B10_B11 == B10_B11)
-    //Use B10/B11 as default serial port
-    #define STDIO_UART_TX  PB_10
-    #define STDIO_UART_RX  PB_11
-    #define STDIO_UART     UART_3
-#else
-    //Use A2/A3 as default serial port
-    #define STDIO_UART_TX  PA_2
-    #define STDIO_UART_RX  PA_3
-    #define STDIO_UART     UART_2
-#endif
-
-typedef enum {
-    SPI_1 = (int)SPI1_BASE,
-    SPI_2 = (int)SPI2_BASE,
-    SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
-    I2C_1 = (int)I2C1_BASE,
-    I2C_2 = (int)I2C2_BASE
-} I2CName;
-
-typedef enum {
-    PWM_2  = (int)TIM2_BASE,
-    PWM_3  = (int)TIM3_BASE,
-    PWM_4  = (int)TIM4_BASE,
-    PWM_5  = (int)TIM5_BASE,
-    PWM_9  = (int)TIM9_BASE,
-    PWM_10 = (int)TIM10_BASE,
-    PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif