[11U68]fix P0_11 to use GPIO
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/system_stm32l1xx.c
- Revision:
- 569:18c5cf67e74d
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32L1/TARGET_NZ32SC151/system_stm32l1xx.c Tue Jun 16 07:45:08 2015 +0100 @@ -0,0 +1,605 @@ +/** + ****************************************************************************** + * @file system_stm32l1xx.c + * @author MCD Application Team + * @version V2.0.0 + * @date 5-September-2014 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32l1xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * This file configures the system clock as follows: + *----------------------------------------------------------------------------- + * System clock source | 1- PLL_HSE_EXTC | 3- PLL_HSI + * | (external 16 MHz clock) | (internal 16 MHz) + * | 2- PLL_HSE_XTAL | + * | (external 16 MHz xtal) | + *----------------------------------------------------------------------------- + * SYSCLK(MHz) | 32 | 32 + *----------------------------------------------------------------------------- + * AHBCLK (MHz) | 32 | 32 + *----------------------------------------------------------------------------- + * APB1CLK (MHz) | 32 | 32 + *----------------------------------------------------------------------------- + * APB2CLK (MHz) | 32 | 32 + *----------------------------------------------------------------------------- + * USB capable (48 MHz precise clock) | YES | NO + *----------------------------------------------------------------------------- + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32l1xx_system + * @{ + */ + +/** @addtogroup STM32L1xx_System_Private_Includes + * @{ + */ + +#include "stm32l1xx.h" +#include "hal_tick.h" + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Defines + * @{ + */ +#if !defined (HSE_VALUE) + #define HSE_VALUE ((uint32_t)16000000) /*!< Default value of the External oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSE_VALUE */ + +#if !defined (HSI_VALUE) + #define HSI_VALUE ((uint32_t)16000000) /*!< Default value of the Internal oscillator in Hz. + This value can be provided and adapted by the user application. */ +#endif /* HSI_VALUE */ + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM32L152D_EVAL board as data memory */ +/* #define DATA_IN_ExtSRAM */ + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Macros + * @{ + */ + +/* Select the clock sources (other than HSI) to start with (0=OFF, 1=ON) */ +#define USE_PLL_HSE_EXTC (0) /* Use external clock */ +#define USE_PLL_HSE_XTAL (1) /* Use external xtal */ + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Variables + * @{ + */ + /* This variable is updated in three ways: + 1) by calling CMSIS function SystemCoreClockUpdate() + 2) by calling HAL API function HAL_RCC_GetHCLKFreq() + 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency + Note: If you use this function to configure the system clock; then there + is no need to call the 2 first functions listed above, since SystemCoreClock + variable is updated automatically. + */ +uint32_t SystemCoreClock = 32000000; /* Default with HSI. Will be updated if HSE is used */ +const uint8_t PLLMulTable[9] = {3, 4, 6, 8, 12, 16, 24, 32, 48}; +const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_FunctionPrototypes + * @{ + */ + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +uint8_t SetSysClock_PLL_HSE(uint8_t bypass); +#endif + +uint8_t SetSysClock_PLL_HSI(void); + +/** + * @} + */ + +/** @addtogroup STM32L1xx_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system. + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /*!< Set MSION bit */ + RCC->CR |= (uint32_t)0x00000100; + + /*!< Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], MCOSEL[2:0] and MCOPRE[2:0] bits */ + RCC->CFGR &= (uint32_t)0x88FFC00C; + + /*!< Reset HSION, HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xEEFEFFFE; + + /*!< Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /*!< Reset PLLSRC, PLLMUL[3:0] and PLLDIV[1:0] bits */ + RCC->CFGR &= (uint32_t)0xFF02FFFF; + + /*!< Disable all interrupts */ + RCC->CIR = 0x00000000; + +#ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); +#endif /* DATA_IN_ExtSRAM */ + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif + + /* Configure the Cube driver */ + SystemCoreClock = 16000000; // At this stage the HSI is used as system clock + HAL_Init(); + + /* Configure the System clock source, PLL Multiplier and Divider factors, + AHB/APBx prescalers and Flash settings */ + SetSysClock(); + + /* Reset the timer to avoid issues after the RAM initialization */ + TIM_MST_RESET_ON; + TIM_MST_RESET_OFF; +} + +/** + * @brief Update SystemCoreClock according to Clock Register Values + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI + * value as defined by the MSI range. + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied/divided by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32l1xx.h file (default value + * 16 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32l1xx.h file (default value + * 8 MHz), user has to ensure that HSE_VALUE is same as the real + * frequency of the crystal used. Otherwise, this function may + * have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmul = 0, plldiv = 0, pllsource = 0, msirange = 0; + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* MSI used as system clock */ + msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13; + SystemCoreClock = (32768 * (1 << (msirange + 1))); + break; + case 0x04: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x08: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x0C: /* PLL used as system clock */ + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmul = RCC->CFGR & RCC_CFGR_PLLMUL; + plldiv = RCC->CFGR & RCC_CFGR_PLLDIV; + pllmul = PLLMulTable[(pllmul >> 18)]; + plldiv = (plldiv >> 22) + 1; + + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + + if (pllsource == 0x00) + { + /* HSI oscillator clock selected as PLL clock entry */ + SystemCoreClock = (((HSI_VALUE) * pllmul) / plldiv); + } + else + { + /* HSE selected as PLL clock entry */ + SystemCoreClock = (((HSE_VALUE) * pllmul) / plldiv); + } + break; + default: /* MSI used as system clock */ + msirange = (RCC->ICSCR & RCC_ICSCR_MSIRANGE) >> 13; + SystemCoreClock = (32768 * (1 << (msirange + 1))); + break; + } + /* Compute HCLK clock frequency --------------------------------------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +#if defined (STM32L151xD) || defined (STM32L152xD) || defined (STM32L162xD) +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in SystemInit() function before jump to main. + * This function configures the external SRAM mounted on STM32L152D_EVAL board + * This SRAM will be used as program data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*-- GPIOs Configuration -----------------------------------------------------*/ +/* + +-------------------+--------------------+------------------+------------------+ + + SRAM pins assignment + + +-------------------+--------------------+------------------+------------------+ + | PD0 <-> FSMC_D2 | PE0 <-> FSMC_NBL0 | PF0 <-> FSMC_A0 | PG0 <-> FSMC_A10 | + | PD1 <-> FSMC_D3 | PE1 <-> FSMC_NBL1 | PF1 <-> FSMC_A1 | PG1 <-> FSMC_A11 | + | PD4 <-> FSMC_NOE | PE7 <-> FSMC_D4 | PF2 <-> FSMC_A2 | PG2 <-> FSMC_A12 | + | PD5 <-> FSMC_NWE | PE8 <-> FSMC_D5 | PF3 <-> FSMC_A3 | PG3 <-> FSMC_A13 | + | PD8 <-> FSMC_D13 | PE9 <-> FSMC_D6 | PF4 <-> FSMC_A4 | PG4 <-> FSMC_A14 | + | PD9 <-> FSMC_D14 | PE10 <-> FSMC_D7 | PF5 <-> FSMC_A5 | PG5 <-> FSMC_A15 | + | PD10 <-> FSMC_D15 | PE11 <-> FSMC_D8 | PF12 <-> FSMC_A6 | PG10<-> FSMC_NE2 | + | PD11 <-> FSMC_A16 | PE12 <-> FSMC_D9 | PF13 <-> FSMC_A7 |------------------+ + | PD12 <-> FSMC_A17 | PE13 <-> FSMC_D10 | PF14 <-> FSMC_A8 | + | PD13 <-> FSMC_A18 | PE14 <-> FSMC_D11 | PF15 <-> FSMC_A9 | + | PD14 <-> FSMC_D0 | PE15 <-> FSMC_D12 |------------------+ + | PD15 <-> FSMC_D1 |--------------------+ + +-------------------+ +*/ + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ + RCC->AHBENR = 0x000080D8; + + /* Connect PDx pins to FSMC Alternate function */ + GPIOD->AFR[0] = 0x00CC00CC; + GPIOD->AFR[1] = 0xCCCCCCCC; + /* Configure PDx pins in Alternate function mode */ + GPIOD->MODER = 0xAAAA0A0A; + /* Configure PDx pins speed to 40 MHz */ + GPIOD->OSPEEDR = 0xFFFF0F0F; + /* Configure PDx pins Output type to push-pull */ + GPIOD->OTYPER = 0x00000000; + /* No pull-up, pull-down for PDx pins */ + GPIOD->PUPDR = 0x00000000; + + /* Connect PEx pins to FSMC Alternate function */ + GPIOE->AFR[0] = 0xC00000CC; + GPIOE->AFR[1] = 0xCCCCCCCC; + /* Configure PEx pins in Alternate function mode */ + GPIOE->MODER = 0xAAAA800A; + /* Configure PEx pins speed to 40 MHz */ + GPIOE->OSPEEDR = 0xFFFFC00F; + /* Configure PEx pins Output type to push-pull */ + GPIOE->OTYPER = 0x00000000; + /* No pull-up, pull-down for PEx pins */ + GPIOE->PUPDR = 0x00000000; + + /* Connect PFx pins to FSMC Alternate function */ + GPIOF->AFR[0] = 0x00CCCCCC; + GPIOF->AFR[1] = 0xCCCC0000; + /* Configure PFx pins in Alternate function mode */ + GPIOF->MODER = 0xAA000AAA; + /* Configure PFx pins speed to 40 MHz */ + GPIOF->OSPEEDR = 0xFF000FFF; + /* Configure PFx pins Output type to push-pull */ + GPIOF->OTYPER = 0x00000000; + /* No pull-up, pull-down for PFx pins */ + GPIOF->PUPDR = 0x00000000; + + /* Connect PGx pins to FSMC Alternate function */ + GPIOG->AFR[0] = 0x00CCCCCC; + GPIOG->AFR[1] = 0x00000C00; + /* Configure PGx pins in Alternate function mode */ + GPIOG->MODER = 0x00200AAA; + /* Configure PGx pins speed to 40 MHz */ + GPIOG->OSPEEDR = 0x00300FFF; + /* Configure PGx pins Output type to push-pull */ + GPIOG->OTYPER = 0x00000000; + /* No pull-up, pull-down for PGx pins */ + GPIOG->PUPDR = 0x00000000; + +/*-- FSMC Configuration ------------------------------------------------------*/ + /* Enable the FSMC interface clock */ + RCC->AHBENR = 0x400080D8; + + /* Configure and enable Bank1_SRAM3 */ + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000300; + FSMC_Bank1E->BWTR[4] = 0x0FFFFFFF; +/* + Bank1_SRAM3 is configured as follow: + + p.FSMC_AddressSetupTime = 0; + p.FSMC_AddressHoldTime = 0; + p.FSMC_DataSetupTime = 3; + p.FSMC_BusTurnAroundDuration = 0; + p.FSMC_CLKDivision = 0; + p.FSMC_DataLatency = 0; + p.FSMC_AccessMode = FSMC_AccessMode_A; + + FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3; + FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; + FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM; + FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; + FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; + FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; + FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; + FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; + FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; + FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; + FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; + FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; + + FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); + + FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE); +*/ + +} +#endif /* DATA_IN_ExtSRAM */ +#endif /* STM32L151xD || STM32L152xD || STM32L162xD */ + +/** + * @brief Configures the System clock source, PLL Multiplier and Divider factors, + * AHB/APBx prescalers and Flash settings + * @note This function should be called only once the RCC clock configuration + * is reset to the default reset state (done in SystemInit() function). + * @param None + * @retval None + */ +void SetSysClock(void) +{ + /* 1- Try to start with HSE and external clock */ +#if USE_PLL_HSE_EXTC != 0 + if (SetSysClock_PLL_HSE(1) == 0) +#endif + { + /* 2- If fail try to start with HSE and external xtal */ + #if USE_PLL_HSE_XTAL != 0 + if (SetSysClock_PLL_HSE(0) == 0) + #endif + { + /* 3- If fail start with HSI clock */ + if (SetSysClock_PLL_HSI() == 0) + { + while(1) + { + // [TODO] Put something here to tell the user that a problem occured... + } + } + } + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_1); +} + +#if (USE_PLL_HSE_XTAL != 0) || (USE_PLL_HSE_EXTC != 0) +/******************************************************************************/ +/* PLL (clocked by HSE) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSE(uint8_t bypass) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* Used to gain time after DeepSleep in case HSI is used */ + if (__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) + { + return 0; + } + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSE and HSI48 oscillators and activate PLL with HSE as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI; + if (bypass == 0) + { + RCC_OscInitStruct.HSEState = RCC_HSE_ON; /* External 16 MHz xtal on OSC_IN/OSC_OUT */ + } + else + { + RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS; /* External 16 MHz clock on OSC_IN */ + } + RCC_OscInitStruct.HSIState = RCC_HSI_OFF; + // SYSCLK = 32 MHz ((16 MHz * 6) / 3) + // USBCLK = 48 MHz ((16 MHz * 6) / 2) --> USB OK + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL6; + RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV3; + + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) + { + return 0; // FAIL + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //if (bypass == 0) + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_2); // 4 MHz + //else + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSE, RCC_MCODIV_1); // 8 MHz + + return 1; // OK +} +#endif + +/******************************************************************************/ +/* PLL (clocked by HSI) used as System clock source */ +/******************************************************************************/ +uint8_t SetSysClock_PLL_HSI(void) +{ + RCC_ClkInitTypeDef RCC_ClkInitStruct; + RCC_OscInitTypeDef RCC_OscInitStruct; + + /* The voltage scaling allows optimizing the power consumption when the device is + clocked below the maximum system frequency, to update the voltage scaling value + regarding system frequency refer to product datasheet. */ + __PWR_CLK_ENABLE(); + __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); + + /* Enable HSI oscillator and activate PLL with HSI as source */ + RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE; + RCC_OscInitStruct.HSEState = RCC_HSE_OFF; + RCC_OscInitStruct.HSIState = RCC_HSI_ON; + // SYSCLK = 32 MHz ((16 MHz * 4) / 2) + // USBCLK = 64 MHz (16 MHz * 4) --> USB not possible + RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; + RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI; + RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL4; + RCC_OscInitStruct.PLL.PLLDIV = RCC_PLL_DIV2; + if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) + { + return 0; // FAIL + } + + /* Poll VOSF bit of in PWR_CSR. Wait until it is reset to 0 */ + while (__HAL_PWR_GET_FLAG(PWR_FLAG_VOS) != RESET) {}; + + /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ + RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); + RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; // 32 MHz + RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; // 32 MHz + RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1; // 32 MHz + RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1; // 32 MHz + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_1) != HAL_OK) + { + return 0; // FAIL + } + + /* Output clock on MCO1 pin(PA8) for debugging purpose */ + //HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_HSI, RCC_MCODIV_1); // 16 MHz + + return 1; // OK +} + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/